The Project Gutenberg EBook of De Re Metallica, by Georgius Agricola

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org


Title: De Re Metallica
       Translated from the First Latin Edition of 1556

Author: Georgius Agricola

Translator: Herbert Clark Hoover
            Lou Henry Hoover

Release Date: November 14, 2011 [EBook #38015]

Language: English

Character set encoding: ASCII

*** START OF THIS PROJECT GUTENBERG EBOOK DE RE METALLICA ***




Produced by Malcolm Farmer, Stephen H. Sentoff and the
Online Distributed Proofreading Team at https://www.pgdp.net








GEORGIUS AGRICOLA

DE RE METALLICA

TRANSLATED FROM THE FIRST LATIN EDITION OF 1556

with

Biographical Introduction, Annotations and Appendices upon
the Development of Mining Methods, Metallurgical
Processes, Geology, Mineralogy & Mining Law
from the earliest times to the 16th Century

BY

HERBERT CLARK HOOVER

A. B. Stanford University, Member American Institute of Mining Engineers,
Mining and Metallurgical Society of America, Societe des Ingenieurs
Civils de France, American Institute of Civil Engineers,
Fellow Royal Geographical Society, etc., etc.

AND

LOU HENRY HOOVER

A. B. Stanford University, Member American Association for the
Advancement of Science, The National Geographical Society,
Royal Scottish Geographical Society, etc., etc.

1950

_Dover Publications, Inc._

NEW YORK




TO

JOHN CASPAR BRANNER Ph.D.,

_The inspiration of whose teaching is no less great than his
contribution to science._

This New 1950 Edition of DE RE METALLICA is a complete and unchanged
reprint of the translation published by The Mining Magazine, London, in
1912. It has been made available through the kind permission of
Honorable Herbert C. Hoover and Mr. Edgar Rickard, Author and Publisher,
respectively, of the original volume.

PRINTED IN THE UNITED STATES OF AMERICA




TRANSLATORS' PREFACE.


There are three objectives in translation of works of this character: to
give a faithful, literal translation of the author's statements; to give
these in a manner which will interest the reader; and to preserve, so
far as is possible, the style of the original text. The task has been
doubly difficult in this work because, in using Latin, the author
availed himself of a medium which had ceased to expand a thousand years
before his subject had in many particulars come into being; in
consequence he was in difficulties with a large number of ideas for
which there were no corresponding words in the vocabulary at his
command, and instead of adopting into the text his native German terms,
he coined several hundred Latin expressions to answer his needs. It is
upon this rock that most former attempts at translation have been
wrecked. Except for a very small number, we believe we have been able to
discover the intended meaning of such expressions from a study of the
context, assisted by a very incomplete glossary prepared by the author
himself, and by an exhaustive investigation into the literature of these
subjects during the sixteenth and seventeenth centuries. That discovery
in this particular has been only gradual and obtained after much labour,
may be indicated by the fact that the entire text has been
re-typewritten three times since the original, and some parts more
often; and further, that the printer's proof has been thrice revised. We
have found some English equivalent, more or less satisfactory, for
practically all such terms, except those of weights, the varieties of
veins, and a few minerals. In the matter of weights we have introduced
the original Latin, because it is impossible to give true equivalents
and avoid the fractions of reduction; and further, as explained in the
Appendix on Weights it is impossible to say in many cases what scale the
Author had in mind. The English nomenclature to be adopted has given
great difficulty, for various reasons; among them, that many methods and
processes described have never been practised in English-speaking mining
communities, and so had no representatives in our vocabulary, and we
considered the introduction of German terms undesirable; other methods
and processes have become obsolete and their descriptive terms with
them, yet we wished to avoid the introduction of obsolete or unusual
English; but of the greatest importance of all has been the necessity to
avoid rigorously such modern technical terms as would imply a greater
scientific understanding than the period possessed.

Agricola's Latin, while mostly free from mediaeval corruption, is
somewhat tainted with German construction. Moreover some portions have
not the continuous flow of sustained thought which others display, but
the fact that the writing of the work extended over a period of twenty
years, sufficiently explains the considerable variation in style. The
technical descriptions in the later books often take the form of
House-that-Jack-built sentences which have had to be at least partially
broken up and the subject occasionally re-introduced. Ambiguities were
also sometimes found which it was necessary to carry on into the
translation. Despite these criticisms we must, however, emphasize that
Agricola was infinitely clearer in his style than his contemporaries
upon such subjects, or for that matter than his successors in almost any
language for a couple of centuries. All of the illustrations and display
letters of the original have been reproduced and the type as closely
approximates to the original as the printers have been able to find in a
modern font.

There are no footnotes in the original text, and Mr. Hoover is
responsible for them all. He has attempted in them to give not only such
comment as would tend to clarify the text, but also such information as
we have been able to discover with regard to the previous history of the
subjects mentioned. We have confined the historical notes to the time
prior to Agricola, because to have carried them down to date in the
briefest manner would have demanded very much more space than could be
allowed. In the examination of such technical and historical material
one is appalled at the flood of mis-information with regard to ancient
arts and sciences which has been let loose upon the world by the hands
of non-technical translators and commentators. At an early stage we
considered that we must justify any divergence of view from such
authorities, but to limit the already alarming volume of this work, we
later felt compelled to eliminate most of such discussion. When the
half-dozen most important of the ancient works bearing upon science have
been translated by those of some scientific experience, such questions
will, no doubt, be properly settled.

We need make no apologies for _De Re Metallica_. During 180 years it was
not superseded as the text-book and guide to miners and metallurgists,
for until Schlueter's great work on metallurgy in 1738 it had no equal.
That it passed through some ten editions in three languages at a period
when the printing of such a volume was no ordinary undertaking, is in
itself sufficient evidence of the importance in which it was held, and
is a record that no other volume upon the same subjects has equalled
since. A large proportion of the technical data given by Agricola was
either entirely new, or had not been given previously with sufficient
detail and explanation to have enabled a worker in these arts himself to
perform the operations without further guidance. Practically the whole
of it must have been given from personal experience and observation, for
the scant library at his service can be appreciated from his own
Preface. Considering the part which the metallic arts have played in
human history, the paucity of their literature down to Agricola's time
is amazing. No doubt the arts were jealously guarded by their
practitioners as a sort of stock-in-trade, and it is also probable that
those who had knowledge were not usually of a literary turn of mind;
and, on the other hand, the small army of writers prior to his time
were not much interested in the description of industrial pursuits.
Moreover, in those thousands of years prior to printing, the tedious and
expensive transcription of manuscripts by hand was mostly applied to
matters of more general interest, and therefore many writings may have
been lost in consequence. In fact, such was the fate of the works of
Theophrastus and Strato on these subjects.

We have prepared a short sketch of Agricola's life and times, not only
to give some indication of his learning and character, but also of his
considerable position in the community in which he lived. As no
appreciation of Agricola's stature among the founders of science can be
gained without consideration of the advance which his works display over
those of his predecessors, we therefore devote some attention to the
state of knowledge of these subjects at the time by giving in the
Appendix a short review of the literature then extant and a summary of
Agricola's other writings. To serve the bibliophile we present such data
as we have been able to collect it with regard to the various editions
of his works. The full titles of the works quoted in the footnotes under
simply authors' names will be found in this Appendix.

We feel that it is scarcely doing Agricola justice to publish _De Re
Metallica_ only. While it is of the most general interest of all of his
works, yet, from the point of view of pure science, _De Natura
Fossilium_ and _De Ortu et Causis_ are works which deserve an equally
important place. It is unfortunate that Agricola's own countrymen have
not given to the world competent translations into German, as his work
has too often been judged by the German translations, the infidelity of
which appears in nearly every paragraph.

We do not present _De Re Metallica_ as a work of "practical" value. The
methods and processes have long since been superseded; yet surely such a
milestone on the road of development of one of the two most basic of
human industrial activities is more worthy of preservation than the
thousands of volumes devoted to records of human destruction. To those
interested in the history of their own profession we need make no
apologies, except for the long delay in publication. For this we put
forward the necessity of active endeavour in many directions; as this
book could be but a labour of love, it has had to find the moments for
its execution in night hours, weekends, and holidays, in all extending
over a period of about five years. If the work serves to strengthen the
traditions of one of the most important and least recognized of the
world's professions we shall be amply repaid.

It is our pleasure to acknowledge our obligations to Professor H. R.
Fairclough, of Stanford University, for perusal of and suggestions upon
the first chapter; and to those whom we have engaged from time to time
for one service or another, chiefly bibliographical work and collateral
translation. We are also sensibly obligated to the printers, Messrs.
Frost & Sons, for their patience and interest, and for their willingness
to bend some of the canons of modern printing, to meet the demands of
the 16th Century.

                                        _July 1, 1912._

    The Red House,
    Hornton Street, London.




INTRODUCTION.


BIOGRAPHY.[1]

Georgius Agricola was born at Glauchau, in Saxony, on March 24th, 1494,
and therefore entered the world when it was still upon the threshold of
the Renaissance; Gutenberg's first book had been printed but forty years
before; the Humanists had but begun that stimulating criticism which
awoke the Reformation; Erasmus, of Rotterdam, who was subsequently to
become Agricola's friend and patron, was just completing his student
days. The Reformation itself was yet to come, but it was not long
delayed, for Luther was born the year before Agricola, and through him
Agricola's homeland became the cradle of the great movement; nor did
Agricola escape being drawn into the conflict. Italy, already awake with
the new classical revival, was still a busy workshop of antiquarian
research, translation, study, and publication, and through her the Greek
and Latin Classics were only now available for wide distribution.
Students from the rest of Europe, among them at a later time Agricola
himself, flocked to the Italian Universities, and on their return
infected their native cities with the newly-awakened learning. At
Agricola's birth Columbus had just returned from his great discovery,
and it was only three years later that Vasco Da Gama rounded Cape Good
Hope. Thus these two foremost explorers had only initiated that greatest
period of geographical expansion in the world's history. A few dates
will recall how far this exploration extended during Agricola's
lifetime. Balboa first saw the Pacific in 1513; Cortes entered the City
of Mexico in 1520; Magellan entered the Pacific in the same year;
Pizarro penetrated into Peru in 1528; De Soto landed in Florida in 1539,
and Potosi was discovered in 1546. Omitting the sporadic settlement on
the St. Lawrence by Cartier in 1541, the settlement of North America did
not begin for a quarter of a century after Agricola's death. Thus the
revival of learning, with its train of Humanism, the Reformation, its
stimulation of exploration and the re-awakening of the arts and
sciences, was still in its infancy with Agricola.

We know practically nothing of Agricola's antecedents or his youth. His
real name was Georg Bauer ("peasant"), and it was probably Latinized by
his teachers, as was the custom of the time. His own brother, in
receipts preserved in the archives of the Zwickau Town Council, calls
himself "Bauer," and in them refers to his brother "Agricola." He
entered the University of Leipsic at the age of twenty, and after about
three and one-half years' attendance there gained the degree of
_Baccalaureus Artium_. In 1518 he became Vice-Principal of the Municipal
School at Zwickau, where he taught Greek and Latin. In 1520 he became
Principal, and among his assistants was Johannes Foerster, better known
as Luther's collaborator in the translation of the Bible. During this
time our author prepared and published a small Latin Grammar[2]. In 1522
he removed to Leipsic to become a lecturer in the University under his
friend, Petrus Mosellanus, at whose death in 1524 he went to Italy for
the further study of Philosophy, Medicine, and the Natural Sciences.
Here he remained for nearly three years, from 1524 to 1526. He visited
the Universities of Bologna, Venice, and probably Padua, and at these
institutions received his first inspiration to work in the sciences, for
in a letter[3] from Leonardus Casibrotius to Erasmus we learn that he
was engaged upon a revision of Galen. It was about this time that he
made the acquaintance of Erasmus, who had settled at Basel as Editor for
Froben's press.

In 1526 Agricola returned to Zwickau, and in 1527 he was chosen town
physician at Joachimsthal. This little city in Bohemia is located on the
eastern slope of the Erzgebirge, in the midst of the then most prolific
metal-mining district of Central Europe. Thence to Freiberg is but fifty
miles, and the same radius from that city would include most of the
mining towns so frequently mentioned in _De Re Metallica_--Schneeberg,
Geyer, Annaberg and Altenberg--and not far away were Marienberg,
Gottesgab, and Platten. Joachimsthal was a booming mining camp, founded
but eleven years before Agricola's arrival, and already having several
thousand inhabitants. According to Agricola's own statement[4], he spent
all the time not required for his medical duties in visiting the mines
and smelters, in reading up in the Greek and Latin authors all
references to mining, and in association with the most learned among the
mining folk. Among these was one Lorenz Berman, whom Agricola afterward
set up as the "learned miner" in his dialogue _Bermannus_. This book was
first published by Froben at Basel in 1530, and was a sort of catechism
on mineralogy, mining terms, and mining lore. The book was apparently
first submitted to the great Erasmus, and the publication arranged by
him, a warm letter of approval by him appearing at the beginning of the
book[5]. In 1533 he published _De Mensuris et Ponderibus_, through
Froben, this being a discussion of Roman and Greek weights and measures.
At about this time he began _De Re Metallica_--not to be published for
twenty-five years.

Agricola did not confine his interest entirely to medicine and mining,
for during this period he composed a pamphlet upon the Turks, urging
their extermination by the European powers. This work was no doubt
inspired by the Turkish siege of Vienna in 1529. It appeared first in
German in 1531, and in Latin--in which it was originally written--in
1538, and passed through many subsequent editions.

At this time, too, he became interested in the God's Gift mine at
Abertham, which was discovered in 1530. Writing in 1545, he says[6]:
"We, as a shareholder, through the goodness of God, have enjoyed the
proceeds of this God's Gift since the very time when the mine began
first to bestow such riches."

Agricola seems to have resigned his position at Joachimsthal in about
1530, and to have devoted the next two or three years to travel and
study among the mines. About 1533 he became city physician of Chemnitz,
in Saxony, and here he resided until his death in 1555. There is but
little record of his activities during the first eight or nine years of
his residence in this city. He must have been engaged upon the study of
his subjects and the preparation of his books, for they came on with
great rapidity soon after. He was frequently consulted on matters of
mining engineering, as, for instance, we learn, from a letter written by
a certain Johannes Hordeborch[7], that Duke Henry of Brunswick applied
to him with regard to the method for working mines in the Upper Harz.

In 1543 he married Anna, widow of Matthias Meyner, a petty tithe
official; there is some reason to believe from a letter published by
Schmid,[8] that Anna was his second wife, and that he was married the
first time at Joachimsthal. He seems to have had several children, for
he commends his young children to the care of the Town Council during
his absence at the war in 1547. In addition to these, we know that a
son, Theodor, was born in 1550; a daughter, Anna, in 1552; another
daughter, Irene, was buried at Chemnitz in 1555; and in 1580 his widow
and three children--Anna, Valerius, and Lucretia--were still living.

In 1544 began the publication of the series of books to which Agricola
owes his position. The first volume comprised five works and was finally
issued in 1546; it was subsequently considerably revised, and re-issued
in 1558. These works were: _De Ortu et Causis Subterraneorum_, in five
"books," the first work on physical geology; _De Natura Eorum quae
Effluunt ex Terra_, in four "books," on subterranean waters and gases;
_De Natura Fossilium_, in ten "books," the first systematic mineralogy;
_De Veteribus et Novis Metallis_, in two "books," devoted largely to the
history of metals and topographical mineralogy; a new edition of
_Bermannus_ was included; and finally _Rerum Metallicarum
Interpretatio_, a glossary of Latin and German mineralogical and
metallurgical terms. Another work, _De Animantibus Subterraneis_,
usually published with _De Re Metallica_, is dated 1548 in the preface.
It is devoted to animals which live underground, at least part of the
time, but is not a very effective basis of either geologic or zoologic
classification. Despite many public activities, Agricola apparently
completed _De Re Metallica_ in 1550, but did not send it to the press
until 1553; nor did it appear until a year after his death in 1555. But
we give further details on the preparation of this work on p. xv. During
this period he found time to prepare a small medical work, _De Peste_,
and certain historical studies, details of which appear in the Appendix.
There are other works by Agricola referred to by sixteenth century
writers, but so far we have not been able to find them although they may
exist. Such data as we have, is given in the appendix.

As a young man, Agricola seems to have had some tendencies toward
liberalism in religious matters, for while at Zwickau he composed some
anti-Popish Epigrams; but after his return to Leipsic he apparently
never wavered, and steadily refused to accept the Lutheran Reformation.
To many even liberal scholars of the day, Luther's doctrines appeared
wild and demagogic. Luther was not a scholarly man; his addresses were
to the masses; his Latin was execrable. Nor did the bitter dissensions
over hair-splitting theology in the Lutheran Church after Luther's death
tend to increase respect for the movement among the learned. Agricola
was a scholar of wide attainments, a deep-thinking, religious man, and
he remained to the end a staunch Catholic, despite the general change of
sentiment among his countrymen. His leanings were toward such men as his
friend the humanist, Erasmus. That he had the courage of his convictions
is shown in the dedication of _De Natura Eorum_, where he addresses to
his friend, Duke Maurice, the pious advice that the dissensions of the
Germans should be composed, and that the Duke should return to the bosom
of the Church those who had been torn from her, and adds: "Yet I do not
wish to become confused by these turbulent waters, and be led to offend
anyone. It is more advisable to check my utterances." As he became older
he may have become less tolerant in religious matters, for he did not
seem to show as much patience in the discussion of ecclesiastical topics
as he must have possessed earlier, yet he maintained to the end the
respect and friendship of such great Protestants as Melanchthon,
Camerarius, Fabricius, and many others.

In 1546, when he was at the age of 52, began Agricola's activity in
public life, for in that year he was elected a Burgher of Chemnitz; and
in the same year Duke Maurice appointed him Burgomaster--an office which
he held for four terms. Before one can gain an insight into his
political services, and incidentally into the character of the man, it
is necessary to understand the politics of the time and his part
therein, and to bear in mind always that he was a staunch Catholic under
a Protestant Sovereign in a State seething with militant Protestantism.

Saxony had been divided in 1485 between the Princes Ernest and Albert,
the former taking the Electoral dignity and the major portion of the
Principality. Albert the Brave, the younger brother and Duke of Saxony,
obtained the subordinate portion, embracing Meissen, but subject to the
Elector. The Elector Ernest was succeeded in 1486 by Frederick the Wise,
and under his support Luther made Saxony the cradle of the Reformation.
This Elector was succeeded in 1525 by his brother John, who was in turn
succeeded by his son John Frederick in 1532. Of more immediate interest
to this subject is the Albertian line of Saxon Dukes who ruled Meissen,
for in that Principality Agricola was born and lived, and his political
fortunes were associated with this branch of the Saxon House. Albert was
succeeded in 1505 by his son George, "The Bearded," and he in turn by
his brother Henry, the last of the Catholics, in 1539, who ruled until
1541. Henry was succeeded in 1541 by his Protestant son Maurice, who was
the Patron of Agricola.

At about this time Saxony was drawn into the storms which rose from the
long-standing rivalry between Francis I., King of France, and Charles V.
of Spain. These two potentates came to the throne in the same year
(1515), and both were candidates for Emperor of that loose Confederation
known as the Holy Roman Empire. Charles was elected, and intermittent
wars between these two Princes arose--first in one part of Europe, and
then in another. Francis finally formed an alliance with the
Schmalkalden League of German Protestant Princes, and with the Sultan of
Turkey, against Charles. In 1546 Maurice of Meissen, although a
Protestant, saw his best interest in a secret league with Charles
against the other Protestant Princes, and proceeded (the Schmalkalden
War) to invade the domains of his superior and cousin, the Elector
Frederick. The Emperor Charles proved successful in this war, and
Maurice was rewarded, at the Capitulation of Wittenberg in 1547, by
being made Elector of Saxony in the place of his cousin. Later on, the
Elector Maurice found the association with Catholic Charles unpalatable,
and joined in leading the other Protestant princes in war upon him, and
on the defeat of the Catholic party and the peace of Passau, Maurice
became acknowledged as the champion of German national and religious
freedom. He was succeeded by his brother Augustus in 1553.

Agricola was much favoured by the Saxon Electors, Maurice and Augustus.
He dedicates most of his works to them, and shows much gratitude for
many favours conferred upon him. Duke Maurice presented to him a house
and plot in Chemnitz, and in a letter dated June 14th, 1543[9] in
connection therewith, says: "... that he may enjoy his life-long a
freehold house unburdened by all burgher rights and other municipal
service, to be used by him and inhabited as a free dwelling, and that he
may also, for the necessities of his household and of his wife and
servants, brew his own beer free, and that he may likewise purvey for
himself and his household foreign beer and also wine for use, and yet he
shall not sell any such beer.... We have taken the said Doctor under our
especial protection and care for our life-long, and he shall not be
summoned before any Court of Justice, but only before us and our
Councillor...."

Agricola was made Burgomaster of Chemnitz in 1546. A letter[10] from
Fabricius to Meurer, dated May 19th, 1546, says that Agricola had been
made Burgomaster by the command of the Prince. This would be Maurice,
and it is all the more a tribute to the high respect with which Agricola
was held, for, as said before, he was a consistent Catholic, and Maurice
a Protestant Prince. In this same year the Schmalkalden War broke out,
and Agricola was called to personal attendance upon the Duke Maurice in
a diplomatic and advisory capacity. In 1546 also he was a member of the
Diet of Freiberg, and was summoned to Council in Dresden. The next year
he continued, by the Duke's command, Burgomaster at Chemnitz, although
he seems to have been away upon Ducal matters most of the time. The Duke
addresses[11] the Chemnitz Council in March, 1547: "We hereby make known
to you that we are in urgent need of your Burgomaster, Dr. Georgius
Agricola, with us. It is, therefore, our will that you should yield him
up and forward him that he should with the utmost haste set forth to us
here near Freiberg." He was sent on various missions from the Duke to
the Emperor Charles, to King Ferdinand of Austria, and to other Princes
in matters connected with the war--the fact that he was a Catholic
probably entering into his appointment to such missions. Chemnitz was
occupied by the troops of first one side, then the other, despite the
great efforts of Agricola to have his own town specially defended. In
April, 1547, the war came to an end in the Battle of Muehlberg, but
Agricola was apparently not relieved of his Burgomastership until the
succeeding year, for he wrote his friend Wolfgang Meurer, in April,
1548,[12] that he "was now relieved." His public duties did not end,
however, for he attended the Diet of Leipzig in 1547 and in 1549, and
was at the Diet at Torgau in 1550. In 1551 he was again installed as
Burgomaster; and in 1553, for the fourth time, he became head of the
Municipality, and during this year had again to attend the Diets at
Leipzig and Dresden, representing his city. He apparently now had a
short relief from public duties, for it is not until 1555, shortly
before his death, that we find him again attending a Diet at Torgau.

Agricola died on November 21st, 1555. A letter[13] from his life-long
friend, Fabricius, to Melanchthon, announcing this event, states: "We
lost, on November 21st, that distinguished ornament of our Fatherland,
Georgius Agricola, a man of eminent intellect, of culture and of
judgment. He attained the age of 62. He who since the days of childhood
had enjoyed robust health was carried off by a four-days' fever. He had
previously suffered from no disease except inflammation of the eyes,
which he brought upon himself by untiring study and insatiable
reading.... I know that you loved the soul of this man, although in many
of his opinions, more especially in religious and spiritual welfare, he
differed in many points from our own. For he despised our Churches, and
would not be with us in the Communion of the Blood of Christ. Therefore,
after his death, at the command of the Prince, which was given to the
Church inspectors and carried out by Tettelbach as a loyal servant,
burial was refused him, and not until the fourth day was he borne away
to Zeitz and interred in the Cathedral.... I have always admired the
genius of this man, so distinguished in our sciences and in the whole
realm of Philosophy--yet I wonder at his religious views, which were
compatible with reason, it is true, and were dazzling, but were by no
means compatible with truth.... He would not tolerate with patience that
anyone should discuss ecclesiastical matters with him." This action of
the authorities in denying burial to one of their most honoured
citizens, who had been ever assiduous in furthering the welfare of the
community, seems strangely out of joint. Further, the Elector Augustus,
although a Protestant Prince, was Agricola's warm friend, as evidenced
by his letter of but a few months before (see p. xv). However, Catholics
were then few in number at Chemnitz, and the feeling ran high at the
time, so possibly the Prince was afraid of public disturbances.
Hofmann[14] explains this occurrence in the following words:--"The
feelings of Chemnitz citizens, who were almost exclusively Protestant,
must certainly be taken into account. They may have raised objections to
the solemn interment of a Catholic in the Protestant Cathedral Church of
St. Jacob, which had, perhaps, been demanded by his relatives, and to
which, according to the custom of the time, he would have been entitled
as Burgomaster. The refusal to sanction the interment aroused, more
especially in the Catholic world, a painful sensation."

A brass memorial plate hung in the Cathedral at Zeitz had already
disappeared in 1686, nor have the cities of his birth or residence ever
shown any appreciation of this man, whose work more deserves their
gratitude than does that of the multitude of soldiers whose monuments
decorate every village and city square. It is true that in 1822 a marble
tablet was placed behind the altar in the Church of St. Jacob in
Chemnitz, but even this was removed to the Historical Museum later on.

He left a modest estate, which was the subject of considerable
litigation by his descendants, due to the mismanagement of the guardian.
Hofmann has succeeded in tracing the descendants for two generations,
down to 1609, but the line is finally lost among the multitude of other
Agricolas.

To deduce Georgius Agricola's character we need not search beyond the
discovery of his steadfast adherence to the religion of his fathers amid
the bitter storm of Protestantism around him, and need but to remember
at the same time that for twenty-five years he was entrusted with
elective positions of an increasingly important character in this same
community. No man could have thus held the respect of his countrymen
unless he were devoid of bigotry and possessed of the highest sense of
integrity, justice, humanity, and patriotism.


AGRICOLA'S INTELLECTUAL ATTAINMENTS AND POSITION IN SCIENCE.

Agricola's education was the most thorough that his times afforded in
the classics, philosophy, medicine, and sciences generally. Further, his
writings disclose a most exhaustive knowledge not only of an
extraordinary range of classical literature, but also of obscure
manuscripts buried in the public libraries of Europe. That his general
learning was held to be of a high order is amply evidenced from the
correspondence of the other scholars of his time--Erasmus, Melanchthon,
Meurer, Fabricius, and others.

Our more immediate concern, however, is with the advances which were due
to him in the sciences of Geology, Mineralogy, and Mining Engineering.
No appreciation of these attainments can be conveyed to the reader
unless he has some understanding of the dearth of knowledge in these
sciences prior to Agricola's time. We have in Appendix B given a brief
review of the literature extant at this period on these subjects.
Furthermore, no appreciation of Agricola's contribution to science can
be gained without a study of _De Ortu et Causis_ and _De Natura
Fossilium_, for while _De Re Metallica_ is of much more general
interest, it contains but incidental reference to Geology and
Mineralogy. Apart from the book of Genesis, the only attempts at
fundamental explanation of natural phenomena were those of the Greek
Philosophers and the Alchemists. Orthodox beliefs Agricola scarcely
mentions; with the Alchemists he had no patience. There can be no doubt,
however, that his views are greatly coloured by his deep classical
learning. He was in fine to a certain distance a follower of Aristotle,
Theophrastus, Strato, and other leaders of the Peripatetic school. For
that matter, except for the muddy current which the alchemists had
introduced into this already troubled stream, the whole thought of the
learned world still flowed from the Greeks. Had he not, however,
radically departed from the teachings of the Peripatetic school, his
work would have been no contribution to the development of science.
Certain of their teachings he repudiated with great vigour, and his
laboured and detailed arguments in their refutation form the first
battle in science over the results of observation _versus_ inductive
speculation. To use his own words: "Those things which we see with our
eyes and understand by means of our senses are more clearly to be
demonstrated than if learned by means of reasoning."[15] The bigoted
scholasticism of his times necessitated as much care and detail in
refutation of such deep-rooted beliefs, as would be demanded to-day by
an attempt at a refutation of the theory of evolution, and in
consequence his works are often but dry reading to any but those
interested in the development of fundamental scientific theory.

In giving an appreciation of Agricola's views here and throughout the
footnotes, we do not wish to convey to the reader that he was in all
things free from error and from the spirit of his times, or that his
theories, constructed long before the atomic theory, are of the
clear-cut order which that basic hypothesis has rendered possible to
later scientific speculation in these branches. His statements are
sometimes much confused, but we reiterate that their clarity is as
crystal to mud in comparison with those of his predecessors--and of most
of his successors for over two hundred years. As an indication of his
grasp of some of the wider aspects of geological phenomena we reproduce,
in Appendix A, a passage from _De Ortu et Causis_, which we believe to
be the first adequate declaration of the part played by erosion in
mountain sculpture. But of all of Agricola's theoretical views those are
of the greatest interest which relate to the origin of ore deposits, for
in these matters he had the greatest opportunities of observation and
the most experience. We have on page 108 reproduced and discussed his
theory at considerable length, but we may repeat here, that in his
propositions as to the circulation of ground waters, that ore channels
are a subsequent creation to the contained rocks, and that they were
filled by deposition from circulating solutions, he enunciated the
foundations of our modern theory, and in so doing took a step in advance
greater than that of any single subsequent authority. In his contention
that ore channels were created by erosion of subterranean waters he was
wrong, except for special cases, and it was not until two centuries
later that a further step in advance was taken by the recognition by Van
Oppel of the part played by fissuring in these phenomena. Nor was it
until about the same time that the filling of ore channels in the main
by deposition from solutions was generally accepted. While Werner, two
hundred and fifty years after Agricola, is generally revered as the
inspirer of the modern theory by those whose reading has taken them no
farther back, we have no hesitation in asserting that of the
propositions of each author, Agricola's were very much more nearly in
accord with modern views. Moreover, the main result of the new ideas
brought forward by Werner was to stop the march of progress for half a
century, instead of speeding it forward as did those of Agricola.

In mineralogy Agricola made the first attempt at systematic treatment of
the subject. His system could not be otherwise than wrongly based, as he
could scarcely see forward two or three centuries to the atomic theory
and our vast fund of chemical knowledge. However, based as it is upon
such properties as solubility and homogeneity, and upon external
characteristics such as colour, hardness, &c., it makes a most
creditable advance upon Theophrastus, Dioscorides, and Albertus
Magnus--his only predecessors. He is the first to assert that bismuth
and antimony are true primary metals; and to some sixty actual mineral
species described previous to his time he added some twenty more, and
laments that there are scores unnamed.

As to Agricola's contribution to the sciences of mining and metallurgy,
_De Re Metallica_ speaks for itself. While he describes, for the first
time, scores of methods and processes, no one would contend that they
were discoveries or inventions of his own. They represent the
accumulation of generations of experience and knowledge; but by him they
were, for the first time, to receive detailed and intelligent
exposition. Until Schlueter's work nearly two centuries later, it was not
excelled. There is no measure by which we may gauge the value of such a
work to the men who followed in this profession during centuries, nor
the benefits enjoyed by humanity through them.

That Agricola occupied a very considerable place in the great awakening
of learning will be disputed by none except by those who place the
development of science in rank far below religion, politics, literature,
and art. Of wider importance than the details of his achievements in the
mere confines of the particular science to which he applied himself, is
the fact that he was the first to found any of the natural sciences upon
research and observation, as opposed to previous fruitless speculation.
The wider interest of the members of the medical profession in the
development of their science than that of geologists in theirs, has led
to the aggrandizement of Paracelsus, a contemporary of Agricola, as the
first in deductive science. Yet no comparative study of the unparalleled
egotistical ravings of this half-genius, half-alchemist, with the modest
sober logic and real research and observation of Agricola, can leave a
moment's doubt as to the incomparably greater position which should be
attributed to the latter as the pioneer in building the foundation of
science by deduction from observed phenomena. Science is the base upon
which is reared the civilization of to-day, and while we give daily
credit to all those who toil in the superstructure, let none forget
those men who laid its first foundation stones. One of the greatest of
these was Georgius Agricola.


DE RE METALLICA

Agricola seems to have been engaged in the preparation of _De Re
Metallica_ for a period of over twenty years, for we first hear of the
book in a letter from Petrus Plateanus, a schoolmaster at Joachimsthal,
to the great humanist, Erasmus,[16] in September, 1529. He says: "The
scientific world will be still more indebted to Agricola when he brings
to light the books _De Re Metallica_ and other matters which he has on
hand." In the dedication of _De Mensuris et Ponderibus_ (in 1533)
Agricola states that he means to publish twelve books _De Re Metallica_,
if he lives. That the appearance of this work was eagerly anticipated is
evidenced by a letter from George Fabricius to Valentine Hertel:[17]
"With great excitement the books _De Re Metallica_ are being awaited. If
he treats the material at hand with his usual zeal, he will win for
himself glory such as no one in any of the fields of literature has
attained for the last thousand years." According to the dedication of
_De Veteribus et Novis Metallis_, Agricola in 1546 already looked
forward to its early publication. The work was apparently finished in
1550, for the dedication to the Dukes Maurice and August of Saxony is
dated in December of that year. The eulogistic poem by his friend,
George Fabricius, is dated in 1551.

The publication was apparently long delayed by the preparation of the
woodcuts; and, according to Mathesius,[18] many sketches for them were
prepared by Basilius Wefring. In the preface of _De Re Metallica_,
Agricola does not mention who prepared the sketches, but does say: "I
have hired illustrators to delineate their forms, lest descriptions
which are conveyed by words should either not be understood by men of
our own times, or should cause difficulty to posterity." In 1553 the
completed book was sent to Froben for publication, for a letter[19] from
Fabricius to Meurer in March, 1553, announces its dispatch to the
printer. An interesting letter[20] from the Elector Augustus to
Agricola, dated January 18, 1555, reads: "Most learned, dear and
faithful subject, whereas you have sent to the Press a Latin book of
which the title is said to be _De Rebus Metallicis_, which has been
praised to us and we should like to know the contents, it is our
gracious command that you should get the book translated when you have
the opportunity into German, and not let it be copied more than once or
be printed, but keep it by you and send us a copy. If you should need a
writer for this purpose, we will provide one. Thus you will fulfil our
gracious behest." The German translation was prepared by Philip Bechius,
a Basel University Professor of Medicine and Philosophy. It is a
wretched work, by one who knew nothing of the science, and who more
especially had no appreciation of the peculiar Latin terms coined by
Agricola, most of which he rendered literally. It is a sad commentary
on his countrymen that no correct German translation exists. The Italian
translation is by Michelangelo Florio, and is by him dedicated to
Elizabeth, Queen of England. The title page of the first edition is
reproduced later on, and the full titles of other editions are given in
the Appendix, together with the author's other works. The following are
the short titles of the various editions of _De Re Metallica_, together
with the name and place of the publisher:--

Latin Editions.

  _De Re Metallica_, Froben        Basel Folio 1556.
   "  "      "         "             "     "   1561.
   "  "      "       Ludwig Koenig    "     "   1621.
   "  "      "       Emanuel Koenig   "     "   1657.

In addition to these, Leupold,[21] Schmid,[22] and others mention an
octavo edition, without illustrations, Schweinfurt, 1607. We have not
been able to find a copy of this edition, and are not certain of its
existence. The same catalogues also mention an octavo edition of _De Re
Metallica_, Wittenberg, 1612 or 1614, with notes by Joanne Sigfrido; but
we believe this to be a confusion with Agricola's subsidiary works,
which were published at this time and place, with such notes.

German Editions.

  _Vom Bergkwerck_, Froben, Folio, 1557.
  _Bergwerck Buch_, Sigmundi Feyrabendt, Frankfort-on-Main, folio, 1580.
       "      "     Ludwig Koenig, Basel, folio, 1621.

There are other editions than these, mentioned by bibliographers, but we
have been unable to confirm them in any library. The most reliable of
such bibliographies, that of John Ferguson,[23] gives in addition to the
above; _Bergwerkbuch_, Basel, 1657, folio, and Schweinfurt, 1687,
octavo.

Italian Edition.

_L'Arte de Metalli_, Froben, Basel, folio, 1563.

Other Languages.

So far as we know, _De Re Metallica_ was never actually published in
other than Latin, German, and Italian. However, a portion of the
accounts of the firm of Froben were published in 1881[24], and therein
is an entry under March, 1560, of a sum to one Leodigaris Grymaldo for
some other work, and also for "correction of Agricola's _De Re
Metallica_ in French." This may of course, be an error for the Italian
edition, which appeared a little later. There is also mention[25] that a
manuscript of _De Re Metallica_ in Spanish was seen in the library of
the town of Bejar. An interesting note appears in the glossary given by
Sir John Pettus in his translation of Lazarus Erckern's work on
assaying. He says[26] "but I cannot enlarge my observations upon any
more words, because the printer calls for what I did write of a
metallick dictionary, after I first proposed the printing of Erckern,
but intending within the compass of a year to publish Georgius Agricola,
_De Re Metallica_ (being fully translated) in English, and also to add a
dictionary to it, I shall reserve my remaining essays (if what I have
done hitherto be approved) till then, and so I proceed in the
dictionary." The translation was never published and extensive inquiry
in various libraries and among the family of Pettus has failed to yield
any trace of the manuscript.


FOOTNOTES:

[1] For the biographical information here set out we have relied
principally upon the following works:--Petrus Albinus, _Meissnische Land
Und Berg Chronica_, Dresden, 1590; Adam Daniel Richter, _Umstaendliche
... Chronica der Stadt Chemnitz_, Leipzig, 1754; Johann Gottfried
Weller, _Altes Aus Allen Theilen Der Geschichte_, Chemnitz, 1766;
Freidrich August Schmid, _Georg Agrikola's Bermannus_, Freiberg, 1806;
Georg Heinrich Jacobi, _Der Mineralog Georgius Agricola_, Zwickau, 1881;
Dr. Reinhold Hofmann, _Dr. Georg Agricola_, Gotha, 1905. The last is an
exhaustive biographical sketch, to which we refer those who are
interested.

[2] _Georgii Agricolae Glaucii Libellus de Prima ac Simplici
Institutione Grammatica_, printed by Melchior Lotther, Leipzig, 1520.
Petrus Mosellanus refers to this work (without giving title) in a letter
to Agricola, June, 1520.

[3] _Briefe an Desiderius Erasmus von Rotterdam._ Published by Joseph
Foerstemann and Otto Guenther. _XXVII. Beiheft zum Zentralblatt fuer
Bibliothekswesen_, Leipzig, 1904. p. 44.

[4] _De Veteribus et Novis Metallis._ Preface.

[5] A summary of this and of Agricola's other works is given in the
Appendix A.

[6] _De Veteribus et Novis Metallis_, Book I.

[7] Printed in F. A. Schmid's _Georg Agrikola's Bermannus_, p. 14,
Freiberg, 1806.

[8] Op. Cit., p. 8.

[9] Archive 38, Chemnitz Municipal Archives.

[10] Baumgarten-Crusius. _Georgii Fabricii Chemnicensis Epistolae ad W.
Meurerum et Alios Aequales_, Leipzig, 1845, p. 26.

[11] Hofmann, Op. cit., p. 99.

[12] Weber, _Virorum Clarorum Saeculi XVI. et XVII. Epistolae
Selectae_, Leipzig, 1894, p. 8.

[13] Baumgarten-Crusius. Op. cit., p. 139.

[14] Hofmann, Op. cit., p. 123.

[15] _De Ortu et Causis_, Book III.

[16] _Briefe an Desiderius Erasmus von Rotterdam._ Published by Joseph
Foerstemann & Otto Guenther. _XXVII. Beiheft zum Zentralblatt fuer
Bibliothekswesen_, Leipzig, 1904, p. 125.

[17] Petrus Albinus, _Meissnische Land und Berg Chronica_, Dresden,
1590, p. 353.

[18] This statement is contained under "1556" in a sort of chronicle
bound up with Mathesius's _Sarepta_, Nuremberg, 1562.

[19] Baumgarten-Crusius, p. 85, letter No. 93.

[20] Principal State Archives, Dresden, Cop. 259, folio 102.

[21] Jacob Leupold, _Prodromus Bibliothecae Metallicae_, 1732, p. 11.

[22] F. A. Schmid, _Georg Agrikola's Bermannus_, Freiberg, 1806, p. 34.

[23] _Bibliotheca Chemica_, Glasgow, 1906, p. 10.

[24] _Rechnungsbuch der Froben und Episcopius Buchdrucker und
Buchhaendler zu Basel_, 1557-1564, published by R. Wackernagle, Basel,
1881. p. 20.

[25] _Colecion del Sr Monoz_ t. 93, fol. 255 _En la Acad. de la Hist._
Madrid.

[26] Sir John Pettus, _Fleta Minor_, The Laws of Art and Nature, &c.,
London, 1636, p. 121.




[Illustration xix (Title page from first edition)]




  GEORGIUS FABRICIUS IN LIBROS
  Metallicos GEORGII AGRICOLAE philosophi
  praestantissimi.[1]

AD LECTOREM.

    Si iuuat ignita cognoscere fronte Chimaeram,
      Semicanem nympham, semibouemque uirum:
    Si centum capitum Titanem, totque ferentem
      Sublimem manibus tela cruenta Gygen:
    Si iuuat AEtneum penetrare Cyclopis in antrum,
      Atque alios, Vates quos peperere, metus:
    Nunc placeat mecum doctos euoluere libros,
      Ingenium AGRICOLAE quos dedit acre tibi.
    Non hic uana tenet suspensam fabula mentem:
      Sed precium, utilitas multa, legentis erit.
    Quidquid terra sinu, gremioque recondidit imo,
      Omne tibi multis eruit ante libris:
    Siue fluens superas ultro nitatur in oras,
      Inueniat facilem seu magis arte uiam.
    Perpetui proprijs manant de fontibus amnes,
      Est grauis Albuneae sponte Mephitis odor.
    Lethales sunt sponte scrobes Dicaearchidis orae,
      Et micat e media conditus ignis humo.
    Plana Nariscorum cum tellus arsit in agro,
      Ter curua nondum falce resecta Ceres,
    Nec dedit hoc damnum pastor, nec Iuppiter igne:
      Vulcani per se ruperat ira solum.
    Terrifico aura foras erumpens, incita motu,
      Saepe facit montes, ante ubi plana uia est.
    Haec abstrusa cauis, imoque incognita fundo,
      Cognita natura saepe fuere duce.
    Arte hominum, in lucem ueniunt quoque multa, manuque
      Terrae multiplices effodiuntur opes.
    Lydia sic nitrum profert, Islandia sulfur,
      Ac modo Tyrrhenus mittit alumen ager.
    Succina, qua trifido subit aequor Vistula cornu,
      Piscantur Codano corpora serua sinu.
    Quid memorem regum preciosa insignia gemmas,
      Marmoraque excelsis structa sub astra iugis?
    Nil lapides, nil saxa moror: sunt pulchra metalla,
      Croese tuis opibus clara, Mydaque tuis,
    Quaeque acer Macedo terra Creneide fodit,
      Nomine permutans nomina prisca suo.
    At nunc non ullis cedit GERMANIA terris,
      Terra ferax hominum, terraque diues opum.
    Hic auri in uenis locupletibus aura refulget,
      Non alio messis carior ulla loco.
    Auricomum extulerit felix Campania ramum,
      Nec fructu nobis deficiente cadit.
    Eruit argenti solidas hoc tempore massas
      Fossor, de proprijs armaque miles agris.
    Ignotum Graijs est Hesperijsque metallum,
      Quod Bisemutum lingua paterna uocat.
    Candidius nigro, sed plumbo nigrius albo,
      Nostra quoque hoc uena diuite fundit humus.
    Funditur in tormenta, corus cum imitantia fulmen,
      AEs, inque hostiles ferrea massa domos.
    Scribuntur plumbo libri: quis credidit ante
      Quam mirandam artem Teutonis ora dedit?
    Nec tamen hoc alijs, aut illa petuntur ab oris,
      Eruta Germano cuncta metalla solo.
    Sed quid ego haec repeto, monumentis tradita claris
      AGRICOLAE, quae nunc docta per ora uolant?
    Hic caussis ortus, & formas uiribus addit,
      Et quaerenda quibus sint meliora locis.
    Quae si mente prius legisti candidus aequa:
      Da reliquis quoque nunc tempora pauca libris.
    Vtilitas sequitur cultorem: crede, uoluptas
      Non iucunda minor, rara legentis, erit.
    Iudicioque prius ne quis male damnet iniquo,
      Quae sunt auctoris munera mira Dei:
    Eripit ipse suis primum tela hostibus, inque
      Mittentis torquet spicula rapta caput.
    Fertur equo latro, uehitur pirata triremi:
      Ergo necandus equus, nec fabricanda ratis?
    Visceribus terrae lateant abstrusa metalla,
      Vti opibus nescit quod mala turba suis?
    Quisquis es, aut doctis pareto monentibus, aut te
      Inter habere bonos ne fateare locum.
    Se non in praerupta metallicus abijcit audax,
      Vt quondam immisso Curtius acer equo:
    Sed prius ediscit, quae sunt noscenda perito,
      Quodque facit, multa doctus ab arte facit.
    Vtque gubernator seruat cum sidere uentos:
      Sic minime dubijs utitur ille notis.
    Iasides nauim, currus regit arte Metiscus:
      Fossor opus peragit nec minus arte suum.
    Indagat uenae spacium, numerumque, modumque,
      Siue obliqua suum, rectaue tendat iter.
    Pastor ut explorat quae terra sit apta colenti,
      Quae bene lanigeras, quae male pascat oues.
    En terrae intentus, quid uincula linea tendit?
      Fungitur officio iam Ptolemaee tuo.
    Vtque suae inuenit mensuram iuraque uenae,
      In uarios operas diuidit inde uiros.
    Iamque aggressus opus, uiden' ut mouet omne quod obstat,
      Assidua ut uersat strenuus arma manu?
    Ne tibi surdescant ferri tinnitibus aures,
      Ad grauiora ideo conspicienda ueni.
    Instruit ecce suis nunc artibus ille minores:
      Sedulitas nulli non operosa loco.
    Metiri docet hic uenae spaciumque modumque,
      Vtque regat positis finibus arua lapis,
    Ne quis transmisso uiolentus limite pergens,
      Non sibi concessas, in sua uertat, opes.
    Hic docet instrumenta, quibus Plutonia regna
      Tutus adit, saxi permeat atque uias.
    Quanta (uides) solidas expugnet machina terras:
      Machina non ullo tempore uisa prius.
    Cede nouis, nulla non inclyta laude uetustas,
      Posteritas meritis est quoque grata tuis.
    Tum quia Germano sunt haec inuenta sub axe,
      Si quis es, inuidiae contrahe uela tuae.
    Ausonis ora tumet bellis, terra Attica cultu,
      Germanum infractus tollit ad astra labor.
    Nec tamen ingenio solet infeliciter uti,
      Mite gerat Phoebi, seu graue Martis opus,
    Tempus adest, structis uenarum montibus, igne
      Explorare, usum quem sibi uena ferat,
    Non labor ingenio caret hic, non copia fructu,
      Est adaperta bonae prima fenestra spei.
    Ergo instat porro grauiores ferre labores,
      Intentas operi nec remouere manus.
    Vrere siue locus poscat, seu tundere uerras,
      Siue lauare lacu praeter euntis aquae.
    Seu flammis iterum modicis torrere necesse est,
      Excoquere aut fastis ignibus omne malum,
    Cum fluit aes riuis, auri argentique metallum,
      Spes animo fossor uix capit ipse suas.
    Argentum cupidus fuluo secernit ab auro,
      Et plumbi lentam demit utrique moram.
    Separat argentum, lucri studiosus, ab aere,
      Seruatis, linquens deteriora, bonis.
    Quae si cuncta uelim tenui percurrere uersu,
      Ante alium reuehat Memnonis orta diem.
    Postremus labor est, concretos discere succos,
      Quos fert innumeris Teutona terra locis.
    Quo sal, quo nitrum, quo pacto fiat alumen,
      Vsibus artificis cum parat illa manus:
    Nec non chalcantum, sulfur, fluidumque bitumen,
      Massaque quo uitri lenta dolanda modo.
    Suscipit haec hominum mirandos cura labores,
      Pauperiem usque adeo ferre famemque graue est,
    Tantus amor uictum paruis extundere natis,
      Et patriae ciuem non dare uelle malum.
    Nec manet in terrae fossoris mersa latebris
      Mens, sed fert domino uota precesque Deo.
    Munificae expectat, spe plenus, munera dextrae,
      Extollens animum laetus ad astra suum.
    Diuitias CHRISTUS dat noticiamque fruendi,
      Cui memori grates pectore semper agit.
    Hoc quoque laudati quondam fecere Philippi,
      Qui uirtutis habent cum pietate decus.
    Huc oculos, huc flecte animum, suauissime Lector,
      Auctoremque pia noscito mente Deum.
    AGRICOLAE hinc optans operoso fausta labori,
      Laudibus eximij candidus esto uiri.
    Ille suum extollit patriae cum nomine nomen,
      Et uir in ore frequens posteritatis erit.
    Cuncta cadunt letho, studij monumenta uigebunt,
      Purpurei donec lumina solis erunt.

                                        Misenae M. D. LI.
                                        eludo illustri.


FOOTNOTES:

[1] For completeness' sake we reproduce in the original Latin the
laudation of Agricola by his friend, Georgius Fabricius, a leading
scholar of his time. It has but little intrinsic value for it is not
poetry of a very high order, and to make it acceptable English would
require certain improvements, for which only poets have licence. A
"free" translation of the last few lines indicates its complimentary
character:--

    "He doth raise his country's fame with his own
      And in the mouths of nations yet unborn
      His praises shall be sung; Death comes to all
      But great achievements raise a monument
      Which shall endure until the sun grows cold."





  TO THE MOST ILLUSTRIOUS
   AND MOST MIGHTY DUKES OF
    Saxony, Landgraves of Thuringia, Margraves of Meissen,
     Imperial Overlords of Saxony, Burgraves of Altenberg
      and Magdeburg, Counts of Brena, Lords of
       Pleissnerland, To MAURICE Grand Marshall
        and Elector of the Holy Roman Empire
         and to his brother AUGUSTUS,[1]
          GEORGE AGRICOLA  S. D.




Most illustrious Princes, often have I considered the metallic arts as a
whole, as Moderatus Columella[2] considered the agricultural arts, just
as if I had been considering the whole of the human body; and when I had
perceived the various parts of the subject, like so many members of the
body, I became afraid that I might die before I should understand its
full extent, much less before I could immortalise it in writing. This
book itself indicates the length and breadth of the subject, and the
number and importance of the sciences of which at least some little
knowledge is necessary to miners. Indeed, the subject of mining is a
very extensive one, and one very difficult to explain; no part of it is
fully dealt with by the Greek and Latin authors whose works survive; and
since the art is one of the most ancient, the most necessary and the
most profitable to mankind, I considered that I ought not to neglect it.
Without doubt, none of the arts is older than agriculture, but that of
the metals is not less ancient; in fact they are at least equal and
coeval, for no mortal man ever tilled a field without implements. In
truth, in all the works of agriculture, as in the other arts, implements
are used which are made from metals, or which could not be made without
the use of metals; for this reason the metals are of the greatest
necessity to man. When an art is so poor that it lacks metals, it is not
of much importance, for nothing is made without tools. Besides, of all
ways whereby great wealth is acquired by good and honest means, none is
more advantageous than mining; for although from fields which are well
tilled (not to mention other things) we derive rich yields, yet we
obtain richer products from mines; in fact, one mine is often much more
beneficial to us than many fields. For this reason we learn from the
history of nearly all ages that very many men have been made rich by the
mines, and the fortunes of many kings have been much amplified thereby.
But I will not now speak more of these matters, because I have dealt
with these subjects partly in the first book of this work, and partly in
the other work entitled _De Veteribus et Novis Metallis_, where I have
refuted the charges which have been made against metals and against
miners. Now, though the art of husbandry, which I willingly rank with
the art of mining, appears to be divided into many branches, yet it is
not separated into so many as this art of ours, nor can I teach the
principles of this as easily as Columella did of that. He had at hand
many writers upon husbandry whom he could follow,--in fact, there are
more than fifty Greek authors whom Marcus Varro enumerates, and more
than ten Latin ones, whom Columella himself mentions. I have only one
whom I can follow; that is C. Plinius Secundus,[3] and he expounds only
a very few methods of digging ores and of making metals. Far from the
whole of the art having been treated by any one writer, those who have
written occasionally on any one or another of its branches have not even
dealt completely with a single one of them. Moreover, there is a great
scarcity even of these, since alone of all the Greeks, Strato of
Lampsacus,[4] the successor of Theophrastus,[5] wrote a book on the
subject, _De Machinis Metallicis_; except, perhaps a work by the poet
Philo, a small part of which embraced to some degree the occupation of
mining.[6] Pherecrates seems to have introduced into his comedy, which
was similar in title, miners as slaves or as persons condemned to serve
in the mines. Of the Latin writers, Pliny, as I have already said, has
described a few methods of working. Also among the authors I must
include the modern writers, whosoever they are, for no one should escape
just condemnation who fails to award due recognition to persons whose
writings he uses, even very slightly. Two books have been written in our
tongue; the one on the assaying of mineral substances and metals,
somewhat confused, whose author is unknown[7]; the other "On Veins," of
which Pandulfus Anglus[8] is also said to have written, although the
German book was written by Calbus of Freiberg, a well-known doctor; but
neither of them accomplished the task he had begun.[9] Recently
Vannucci Biringuccio, of Sienna, a wise man experienced in many matters,
wrote in vernacular Italian on the subject of the melting, separating,
and alloying of metals.[10] He touched briefly on the methods of
smelting certain ores, and explained more fully the methods of making
certain juices; by reading his directions, I have refreshed my memory of
those things which I myself saw in Italy; as for many matters on which I
write, he did not touch upon them at all, or touched but lightly. This
book was given me by Franciscus Badoarius, a Patrician of Venice, and a
man of wisdom and of repute; this he had promised that he would do, when
in the previous year he was at Marienberg, having been sent by the
Venetians as an Ambassador to King Ferdinand. Beyond these books I do
not find any writings on the metallic arts. For that reason, even if the
book of Strato existed, from all these sources not one-half of the whole
body of the science of mining could be pieced together.

Seeing that there have been so few who have written on the subject of
the metals, it appears to me all the more wonderful that so many
alchemists have arisen who would compound metals artificially, and who
would change one into another. Hermolaus Barbarus,[11] a man of high
rank and station, and distinguished in all kinds of learning, has
mentioned the names of many in his writings; and I will proffer more,
but only famous ones, for I will limit myself to a few. Thus Osthanes
has written on [Greek: chymeutika]; and there are Hermes; Chanes;
Zosimus, the Alexandrian, to his sister Theosebia; Olympiodorus, also an
Alexandrian; Agathodaemon; Democritus, not the one of Abdera, but some
other whom I know not; Orus Chrysorichites, Pebichius, Comerius,
Joannes, Apulejus, Petasius, Pelagius, Africanus, Theophilus, Synesius,
Stephanus to Heracleus Caesar, Heliodorus to Theodosius, Geber, Callides
Rachaidibus, Veradianus, Rodianus, Canides, Merlin, Raymond Lully,
Arnold de Villa Nova, and Augustinus Pantheus of Venice; and three
women, Cleopatra, the maiden Taphnutia, and Maria the Jewess.[12] All
these alchemists employ obscure language, and Johanes Aurelius
Augurellus of Rimini, alone has used the language of poetry. There are
many other books on this subject, but all are difficult to follow,
because the writers upon these things use strange names, which do not
properly belong to the metals, and because some of them employ now one
name and now another, invented by themselves, though the thing itself
changes not. These masters teach their disciples that the base metals,
when smelted, are broken up; also they teach the methods by which they
reduce them to the primary parts and remove whatever is superfluous in
them, and by supplying what is wanted make out of them the precious
metals--that is, gold and silver,--all of which they carry out in a
crucible. Whether they can do these things or not I cannot decide; but,
seeing that so many writers assure us with all earnestness that they
have reached that goal for which they aimed, it would seem that faith
might be placed in them; yet also seeing that we do not read of any of
them ever having become rich by this art, nor do we now see them growing
rich, although so many nations everywhere have produced, and are
producing, alchemists, and all of them are straining every nerve night
and day to the end that they may heap a great quantity of gold and
silver, I should say the matter is dubious. But although it may be due
to the carelessness of the writers that they have not transmitted to us
the names of the masters who acquired great wealth through this
occupation, certainly it is clear that their disciples either do not
understand their precepts or, if they do understand them, do not follow
them; for if they do comprehend them, seeing that these disciples have
been and are so numerous, they would have by to-day filled whole towns
with gold and silver. Even their books proclaim their vanity, for they
inscribe in them the names of Plato and Aristotle and other
philosophers, in order that such high-sounding inscriptions may impose
upon simple people and pass for learning. There is another class of
alchemists who do not change the substance of base metals, but colour
them to represent gold or silver, so that they appear to be that which
they are not, and when this appearance is taken from them by the fire,
as if it were a garment foreign to them, they return to their own
character. These alchemists, since they deceive people, are not only
held in the greatest odium, but their frauds are a capital offence. No
less a fraud, warranting capital punishment, is committed by a third
sort of alchemists; these throw into a crucible a small piece of gold or
silver hidden in a coal, and after mixing therewith fluxes which have
the power of extracting it, pretend to be making gold from orpiment, or
silver from tin and like substances. But concerning the art of alchemy,
if it be an art, I will speak further elsewhere. I will now return to
the art of mining.

Since no authors have written of this art in its entirety, and since
foreign nations and races do not understand our tongue, and, if they did
understand it, would be able to learn only a small part of the art
through the works of those authors whom we do possess, I have written
these twelve books _De Re Metallica_. Of these, the first book contains
the arguments which may be used against this art, and against metals and
the mines, and what can be said in their favour. The second book
describes the miner, and branches into a discourse on the finding of
veins. The third book deals with veins and stringers, and seams in the
rocks. The fourth book explains the method of delimiting veins, and also
describes the functions of the mining officials. The fifth book
describes the digging of ore and the surveyor's art. The sixth book
describes the miners' tools and machines. The seventh book is on the
assaying of ore. The eighth book lays down the rules for the work of
roasting, crushing, and washing the ore. The ninth book explains the
methods of smelting ores. The tenth book instructs those who are
studious of the metallic arts in the work of separating silver from
gold, and lead from gold and silver. The eleventh book shows the way of
separating silver from copper. The twelfth book gives us rules for
manufacturing salt, soda, alum, vitriol, sulphur, bitumen, and glass.

Although I have not fulfilled the task which I have undertaken, on
account of the great magnitude of the subject, I have, at all events,
endeavoured to fulfil it, for I have devoted much labour and care, and
have even gone to some expense upon it; for with regard to the veins,
tools, vessels, sluices, machines, and furnaces, I have not only
described them, but have also hired illustrators to delineate their
forms, lest descriptions which are conveyed by words should either not
be understood by men of our own times, or should cause difficulty to
posterity, in the same way as to us difficulty is often caused by many
names which the Ancients (because such words were familiar to all of
them) have handed down to us without any explanation.

I have omitted all those things which I have not myself seen, or have
not read or heard of from persons upon whom I can rely. That which I
have neither seen, nor carefully considered after reading or hearing of,
I have not written about. The same rule must be understood with regard
to all my instruction, whether I enjoin things which ought to be done,
or describe things which are usual, or condemn things which are done.
Since the art of mining does not lend itself to elegant language, these
books of mine are correspondingly lacking in refinement of style. The
things dealt with in this art of metals sometimes lack names, either
because they are new, or because, even if they are old, the record of
the names by which they were formerly known has been lost. For this
reason I have been forced by a necessity, for which I must be pardoned,
to describe some of them by a number of words combined, and to
distinguish others by new names,--to which latter class belong
_Ingestor_, _Discretor_, _Lotor_, and _Excoctor_.[13] Other things,
again, I have alluded to by old names, such as the _Cisium_; for when
Nonius Marcellus wrote,[14] this was the name of a two-wheeled vehicle,
but I have adopted it for a small vehicle which has only one wheel; and
if anyone does not approve of these names, let him either find more
appropriate ones for these things, or discover the words used in the
writings of the Ancients.

These books, most illustrious Princes, are dedicated to you for many
reasons, and, above all others, because metals have proved of the
greatest value to you; for though your ancestors drew rich profits from
the revenues of their vast and wealthy territories, and likewise from
the taxes which were paid by the foreigners by way of toll and by the
natives by way of tithes, yet they drew far richer profits from the
mines. Because of the mines not a few towns have risen into eminence,
such as Freiberg, Annaberg, Marienberg, Schneeberg, Geyer, and
Altenberg, not to mention others. Nay, if I understand anything, greater
wealth now lies hidden beneath the ground in the mountainous parts of
your territory than is visible and apparent above ground. Farewell.

    _Chemnitz, Saxony,
    December First, 1550._


FOOTNOTES:

[1] For Agricola's relations with these princes see p. ix.

[2] Lucius Junius Moderatus Columella was a Roman, a native of Cadiz,
and lived during the 1st Century. He was the author of _De Re Rustica_
in 12 books. It was first printed in 1472, and some fifteen or sixteen
editions had been printed before Agricola's death.

[3] We give a short review of Pliny's _Naturalis Historia_ in the
Appendix B.

[4] This work is not extant, as Agricola duly notes later on. Strato
succeeded Theophrastus as president of the Lyceum, 288 B.C.

[5] For note on Theophrastus see Appendix B.

[6] It appears that the poet Philo did write a work on mining which is
not extant. So far as we know the only reference to this work is in
Athenaeus' (200 A.D.) _Deipnosophistae_. The passage as it appears in C.
D. Yonge's Translation (Bonn's Library, London, 1854, Vol. II, Book VII,
p. 506) is: "And there is a similar fish produced in the Red Sea which
is called Stromateus; it has gold-coloured lines running along the whole
of his body, as Philo tells us in his book on Mines." There is a
fragment of a poem of Pherecrates, entitled "Miners," but it seems to
have little to do with mining.

[7] The title given by Agricola _De Materiae Metallicae et Metallorum
Experimento_ is difficult to identify. It seems likely to be the little
_Probier Buechlein_, numbers of which were published in German in the
first half of the 16th Century. We discuss this work at some length in
the Appendix B on Ancient Authors.

[8] Pandulfus, "the Englishman," is mentioned by various 15th and 16th
Century writers, and in the preface of Mathias Farinator's _Liber
Moralitatum ... Rerum Naturalium_, etc., printed in Augsburg, 1477,
there is a list of books among which appears a reference to a work by
Pandulfus on veins and minerals. We have not been able to find the book.

[9] Jacobi (_Der Mineralog Georgius Agricola_, Zwickau, 1881, p. 47)
says: "Calbus Freibergius, so called by Agricola himself, is certainly
no other than the Freiberg Doctor Ruehlein von Kalbe; he was, according
to Moeller, a doctor and burgomaster at Freiberg at the end of the 15th
and the beginning of the 16th Centuries.... The chronicler describes him
as a fine mathematician, who helped to survey and design the mining
towns of Annaberg in 1497 and Marienberg in 1521." We would call
attention to the statement of Calbus' views, quoted at the end of Book
III, _De Re Metallica_ (p. 75), which are astonishingly similar to
statements in the _Nuetzlich Bergbuechlin_, and leave little doubt that
this "Calbus" was the author of that anonymous book on veins. For
further discussion see Appendix B.

[10] For discussion of Biringuccio see Appendix B. The proper title is
_De La Pirotechnia_ (Venice, 1540).

[11] Hermolaus Barbarus, according to Watt (_Bibliotheca Britannica_,
London, 1824), was a lecturer on Philosophy in Padua. He was born in
1454, died in 1493, and was the author of a number of works on medicine,
natural history, etc., with commentaries on the older authors.

[12] The debt which humanity does owe to these self-styled philosophers
must not be overlooked, for the science of Chemistry comes from three
sources--Alchemy, Medicine and Metallurgy. However polluted the former
of these may be, still the vast advance which it made by the discovery
of the principal acids, alkalis, and the more common of their salts,
should be constantly recognized. It is obviously impossible, within the
space of a footnote, to give anything but the most casual notes as to
the personages here mentioned and their writings. Aside from the
classics and religious works, the libraries of the Middle Ages teemed
with more material on Alchemy than on any other one subject, and since
that date a never-ending stream of historical, critical, and discursive
volumes and tracts devoted to the old Alchemists and their writings has
been poured upon the world. A collection recently sold in London,
relating to Paracelsus alone, embraced over seven hundred volumes.

Of many of the Alchemists mentioned by Agricola little is really known,
and no two critics agree as to the commonest details regarding many of
them; in fact, an endless confusion springs from the negligent habit of
the lesser Alchemists of attributing the authorship of their writings to
more esteemed members of their own ilk, such as Hermes, Osthanes, etc.,
not to mention the palpable spuriousness of works under the names of the
real philosophers, such as Aristotle, Plato, or Moses, and even of Jesus
Christ. Knowledge of many of the authors mentioned by Agricola does not
extend beyond the fact that the names mentioned are appended to various
writings, in some instances to MSS yet unpublished. They may have been
actual persons, or they may not. Agricola undoubtedly had perused such
manuscripts and books in some leading library, as the quotation from
Boerhaave given later shows. Shaw (A New Method of Chemistry, etc.,
London, 1753. Vol. I, p. 25) considers that the large number of such
manuscripts in the European libraries at this time were composed or
transcribed by monks and others living in Constantinople, Alexandria,
and Athens, who fled westward before the Turkish invasion, bringing
their works with them.

For purposes of this summary we group the names mentioned by Agricola,
the first class being of those who are known only as names appended to
MSS or not identifiable at all. Possibly a more devoted student of the
history of Alchemy would assign fewer names to this department of
oblivion. They are Maria the Jewess, Orus Chrysorichites, Chanes,
Petasius, Pebichius, Theophilus, Callides, Veradianus, Rodianus,
Canides, the maiden Taphnutia, Johannes, Augustinus, and Africanus. The
last three are names so common as not to be possible of identification
without more particulars, though Johannes may be the Johannes Rupeseissa
(1375), an alchemist of some note. Many of these names can be found
among the Bishops and Prelates of the early Christian Church, but we
doubt if their owners would ever be identified with such indiscretions
as open, avowed alchemy. The Theophilus mentioned might be the
metal-working monk of the 12th Century, who is further discussed in
Appendix B on Ancient Authors.

In the next group fall certain names such as Osthanes, Hermes, Zosimus,
Agathodaemon, and Democritus, which have been the watchwords of
authority to Alchemists of all ages. These certainly possessed the great
secrets, either the philosopher's stone or the elixir. Hermes
Trismegistos was a legendary Egyptian personage supposed to have
flourished before 1,500 B.C., and by some considered to be a corruption
of the god Thoth. He is supposed to have written a number of works, but
those extant have been demonstrated to date not prior to the second
Century; he is referred to by the later Greek Alchemists, and was
believed to have possessed the secret of transmutation. Osthanes was
also a very shadowy personage, and was considered by some Alchemists to
have been an Egyptian prior to Hermes, by others to have been the
teacher of Zoroaster. Pliny mentions a magician of this name who
accompanied Xerxes' army. Later there are many others of this name, and
the most probable explanation is that this was a favourite pseudonym for
ancient magicians; there is a very old work, of no great interest, in
MSS in Latin and Greek, in the Munich, Gotha, Vienna, and other
libraries, by one of this name. Agathodaemon was still another shadowy
character referred to by the older Alchemists. There are MSS in the
Florence, Paris, Escurial, and Munich libraries bearing his name, but
nothing tangible is known as to whether he was an actual man or if these
writings are not of a much later period than claimed.

To the next group belong the Greek Alchemists, who flourished during the
rise and decline of Alexandria, from 200 B.C. to 700 A.D., and we give
them in order of their dates. Comerius was considered by his later
fellow professionals to have been the teacher of the art to Cleopatra
(1st Century B.C.), and a MSS with a title to that effect exists in the
Bibliotheque Nationale at Paris. The celebrated Cleopatra seems to have
stood very high in the estimation of the Alchemists; perhaps her
doubtful character found a response among them; there are various works
extant in MSS attributed to her, but nothing can be known as to their
authenticity. Lucius Apulejus or Apuleius was born in Numidia about the
2nd Century; he was a Roman Platonic Philosopher, and was the author of
a romance, "The Metamorphosis, or the Golden Ass." Synesius was a Greek,
but of unknown period; there is a MSS treatise on the Philosopher's
Stone in the library at Leyden under his name, and various printed works
are attributed to him; he mentions "water of saltpetre," and has,
therefore, been hazarded to be the earliest recorder of nitric acid. The
work here referred to as "Heliodorus to Theodosius" was probably the MSS
in the Libraries at Paris, Vienna, Munich, etc., under the title of
"Heliodorus the Philosopher's Poem to the Emperor Theodosius the Great
on the Mystic Art of the Philosophers, etc." His period would,
therefore, be about the 4th Century. The Alexandrian Zosimus is more
generally known as Zosimus the Panopolite, from Panopolis, an ancient
town on the Nile; he flourished in the 5th Century, and belonged to the
Alexandrian School of Alchemists; he should not be confused with the
Roman historian of the same name and period. The following statement is
by Boerhaave (_Elementa Chemiae_, Paris, 1724, Chap. I.):--"The name
Chemistry written in Greek, or _Chemia_, is so ancient as perhaps to
have been used in the antediluvian age. Of this opinion was Zosimus the
Panopolite, whose Greek writings, though known as long as before the
year 1550 to George Agricola, and afterwards perused ... by Jas.
Scaliger and Olaus Borrichius, still remain unpublished in the King of
France's library. In one of these, entitled, 'The Instruction of Zosimus
the Panopolite and Philosopher, out of those written to Theosebia,
etc....'" Olympiodorus was an Alexandrian of the 5th Century, whose
writings were largely commentaries on Plato and Aristotle; he is
sometimes accredited with being the first to describe white arsenic
(arsenical oxide). The full title of the work styled "Stephanus to
Heracleus Caesar," as published in Latin at Padua in 1573, was "Stephan
of Alexandria, the Universal Philosopher and Master, his nine processes
on the great art of making gold and silver, addressed to the Emperor
Heraclius." He, therefore, if authentic, dates in the 7th Century.

To the next class belong those of the Middle Ages, which we give in
order of date. The works attributed to Geber play such an important part
in the history of Chemistry and Metallurgy that we discuss his book at
length in Appendix B. Late criticism indicates that this work was not
the production of an 8th Century Arab, but a compilation of some Latin
scholar of the 12th or 13th Centuries. Arnold de Villa Nova, born about
1240, died in 1313, was celebrated as a physician, philosopher, and
chemist; his first works were published in Lyons in 1504; many of them
have apparently never been printed, for references may be found to some
18 different works. Raymond Lully, a Spaniard, born in 1235, who was a
disciple of Arnold de Villa Nova, was stoned to death in Africa in 1315.
There are extant over 100 works attributed to this author, although
again the habit of disciples of writing under the master's name may be
responsible for most of these. John Aurelio Augurello was an Italian
Classicist, born in Rimini about 1453. The work referred to,
_Chrysopoeia et Gerontica_ is a poem on the art of making gold, etc.,
published in Venice, 1515, and re-published frequently thereafter; it is
much quoted by Alchemists. With regard to Merlin, as satisfactory an
account as any of this truly English magician may be found in Mark
Twain's "Yankee at the Court of King Arthur." It is of some interest to
note that Agricola omits from his list Avicenna (980-1037 A.D.), Roger
Bacon (1214-1294), Albertus Magnus (1193-1280), Basil Valentine (end
15th century?), and Paracelsus, a contemporary of his own. In _De Ortu
et Causis_ he expends much thought on refutation of theories advanced by
Avicenna and Albertus, but of the others we have found no mention,
although their work is, from a chemical point of view, of considerable
importance.

[13] _Ingestor_,--Carrier; _Discretor_,--Sorter; _Lotor_,--Washer;
_Excoctor_,--Smelter.

[14] Nonius Marcellus was a Roman grammarian of the 4th Century B.C. His
extant treatise is entitled, _De Compendiosa Doctrina per Litteras ad
Filium_.




BOOK I.


Many persons hold the opinion that the metal industries are fortuitous
and that the occupation is one of sordid toil, and altogether a kind of
business requiring not so much skill as labour. But as for myself, when
I reflect carefully upon its special points one by one, it appears to be
far otherwise. For a miner must have the greatest skill in his work,
that he may know first of all what mountain or hill, what valley or
plain, can be prospected most profitably, or what he should leave alone;
moreover, he must understand the veins, stringers[1] and seams in the
rocks[2]. Then he must be thoroughly familiar with the many and varied
species of earths, juices[3], gems, stones, marbles, rocks, metals, and
compounds[4]. He must also have a complete knowledge of the method of
making all underground works. Lastly, there are the various systems of
assaying[5] substances and of preparing them for smelting; and here
again there are many altogether diverse methods. For there is one method
for gold and silver, another for copper, another for quicksilver,
another for iron, another for lead, and even tin and bismuth[6] are
treated differently from lead. Although the evaporation of juices is an
art apparently quite distinct from metallurgy, yet they ought not to be
considered separately, inasmuch as these juices are also often dug out
of the ground solidified, or they are produced from certain kinds of
earth and stones which the miners dig up, and some of the juices are not
themselves devoid of metals. Again, their treatment is not simple, since
there is one method for common salt, another for soda[7], another for
alum, another for vitriol[8], another for sulphur, and another for
bitumen.

Furthermore, there are many arts and sciences of which a miner should
not be ignorant. First there is Philosophy, that he may discern the
origin, cause, and nature of subterranean things; for then he will be
able to dig out the veins easily and advantageously, and to obtain more
abundant results from his mining. Secondly, there is Medicine, that he
may be able to look after his diggers and other workmen, that they do
not meet with those diseases to which they are more liable than workmen
in other occupations, or if they do meet with them, that he himself may
be able to heal them or may see that the doctors do so. Thirdly follows
Astronomy, that he may know the divisions of the heavens and from them
judge the direction of the veins. Fourthly, there is the science of
Surveying that he may be able to estimate how deep a shaft should be
sunk to reach the tunnel which is being driven to it, and to determine
the limits and boundaries in these workings, especially in depth.
Fifthly, his knowledge of Arithmetical Science should be such that he
may calculate the cost to be incurred in the machinery and the working
of the mine. Sixthly, his learning must comprise Architecture, that he
himself may construct the various machines and timber work required
underground, or that he may be able to explain the method of the
construction to others. Next, he must have knowledge of Drawing, that he
can draw plans of his machinery. Lastly, there is the Law, especially
that dealing with metals, that he may claim his own rights, that he may
undertake the duty of giving others his opinion on legal matters, that
he may not take another man's property and so make trouble for himself,
and that he may fulfil his obligations to others according to the law.

It is therefore necessary that those who take an interest in the methods
and precepts of mining and metallurgy should read these and others of
our books studiously and diligently; or on every point they should
consult expert mining people, though they will discover few who are
skilled in the whole art. As a rule one man understands only the methods
of mining, another possesses the knowledge of washing[9], another is
experienced in the art of smelting, another has a knowledge of measuring
the hidden parts of the earth, another is skilful in the art of making
machines, and finally, another is learned in mining law. But as for us,
though we may not have perfected the whole art of the discovery and
preparation of metals, at least we can be of great assistance to persons
studious in its acquisition.

But let us now approach the subject we have undertaken. Since there has
always been the greatest disagreement amongst men concerning metals and
mining, some praising, others utterly condemning them, therefore I have
decided that before imparting my instruction, I should carefully weigh
the facts with a view to discovering the truth in this matter.

So I may begin with the question of utility, which is a two-fold one,
for either it may be asked whether the art of mining is really
profitable or not to those who are engaged in it, or whether it is
useful or not to the rest of mankind. Those who think mining of no
advantage to the men who follow the occupation assert, first, that
scarcely one in a hundred who dig metals or other such things derive
profit therefrom; and again, that miners, because they entrust their
certain and well-established wealth to dubious and slippery fortune,
generally deceive themselves, and as a result, impoverished by expenses
and losses, in the end spend the most bitter and most miserable of
lives. But persons who hold these views do not perceive how much a
learned and experienced miner differs from one ignorant and unskilled in
the art. The latter digs out the ore without any careful discrimination,
while the former first assays and proves it, and when he finds the veins
either too narrow and hard, or too wide and soft, he infers therefrom
that these cannot be mined profitably, and so works only the approved
ones. What wonder then if we find the incompetent miner suffers loss,
while the competent one is rewarded by an abundant return from his
mining? The same thing applies to husbandmen. For those who cultivate
land which is alike arid, heavy, and barren, and in which they sow
seeds, do not make so great a harvest as those who cultivate a fertile
and mellow soil and sow their grain in that. And since by far the
greater number of miners are unskilled rather than skilled in the art,
it follows that mining is a profitable occupation to very few men, and a
source of loss to many more. Therefore the mass of miners who are quite
unskilled and ignorant in the knowledge of veins not infrequently lose
both time and trouble[10]. Such men are accustomed for the most part to
take to mining, either when through being weighted with the fetters of
large and heavy debts, they have abandoned a business, or desiring to
change their occupation, have left the reaping-hook and plough; and so
if at any time such a man discovers rich veins or other abounding mining
produce, this occurs more by good luck than through any knowledge on his
part. We learn from history that mining has brought wealth to many, for
from old writings it is well known that prosperous Republics, not a few
kings, and many private persons, have made fortunes through mines and
their produce. This subject, by the use of many clear and illustrious
examples, I have dilated upon and explained in the first Book of my work
entitled "_De Veteribus et Novis Metallis_," from which it is evident
that mining is very profitable to those who give it care and attention.

Again, those who condemn the mining industry say that it is not in the
least stable, and they glorify agriculture beyond measure. But I do not
see how they can say this with truth, for the silver mines at Freiberg
in Meissen remain still unexhausted after 400 years, and the lead mines
of Goslar after 600 years. The proof of this can be found in the
monuments of history. The gold and silver mines belonging to the
communities of Schemnitz and Cremnitz have been worked for 800 years,
and these latter are said to be the most ancient privileges of the
inhabitants. Some then say the profit from an individual mine is
unstable, as if forsooth, the miner is, or ought to be dependent on only
one mine, and as if many men do not bear in common their expenses in
mining, or as if one experienced in his art does not dig another vein,
if fortune does not amply respond to his prayers in the first case. The
New Schoenberg at Freiberg has remained stable beyond the memory of
man[11].

It is not my intention to detract anything from the dignity of
agriculture, and that the profits of mining are less stable I will
always and readily admit, for the veins do in time cease to yield
metals, whereas the fields bring forth fruits every year. But though the
business of mining may be less reliable it is more productive, so that
in reckoning up, what is wanting in stability is found to be made up by
productiveness. Indeed, the yearly profit of a lead mine in comparison
with the fruitfulness of the best fields, is three times or at least
twice as great. How much does the profit from gold or silver mines
exceed that earned from agriculture? Wherefore truly and shrewdly does
Xenophon[12] write about the Athenian silver mines: "There is land of
such a nature that if you sow, it does not yield crops, but if you dig,
it nourishes many more than if it had borne fruit." So let the farmers
have for themselves the fruitful fields and cultivate the fertile hills
for the sake of their produce; but let them leave to miners the gloomy
valleys and sterile mountains, that they may draw forth from these, gems
and metals which can buy, not only the crops, but all things that are
sold.

The critics say further that mining is a perilous occupation to pursue,
because the miners are sometimes killed by the pestilential air which
they breathe; sometimes their lungs rot away; sometimes the men perish
by being crushed in masses of rock; sometimes, falling from the ladders
into the shafts, they break their arms, legs, or necks; and it is added
there is no compensation which should be thought great enough to
equalize the extreme dangers to safety and life. These occurrences, I
confess, are of exceeding gravity, and moreover, fraught with terror and
peril, so that I should consider that the metals should not be dug up at
all, if such things were to happen very frequently to the miners, or if
they could not safely guard against such risks by any means. Who would
not prefer to live rather than to possess all things, even the metals?
For he who thus perishes possesses nothing, but relinquishes all to his
heirs. But since things like this rarely happen, and only in so far as
workmen are careless, they do not deter miners from carrying on their
trade any more than it would deter a carpenter from his, because one of
his mates has acted incautiously and lost his life by falling from a
high building. I have thus answered each argument which critics are wont
to put before me when they assert that mining is an undesirable
occupation, because it involves expense with uncertainty of return,
because it is changeable, and because it is dangerous to those engaged
in it.

Now I come to those critics who say that mining is not useful to the
rest of mankind because forsooth, gems, metals, and other mineral
products are worthless in themselves. This admission they try to extort
from us, partly by arguments and examples, partly by misrepresentations
and abuse of us. First, they make use of this argument: "The earth does
not conceal and remove from our eyes those things which are useful and
necessary to mankind, but on the contrary, like a beneficent and kindly
mother she yields in large abundance from her bounty and brings into the
light of day the herbs, vegetables, grains, and fruits, and the trees.
The minerals on the other hand she buries far beneath in the depth of
the ground; therefore, they should not be sought. But they are dug out
by wicked men who, as the poets say, are the products of the Iron Age."
Ovid censures their audacity in the following lines:--

     "And not only was the rich soil required to furnish corn and
     due sustenance, but men even descended into the entrails of the
     earth, and they dug up riches, those incentives to vice, which
     the earth had hidden and had removed to the Stygian shades.
     Then destructive iron came forth, and gold, more destructive
     than iron; then war came forth."[13]

Another of their arguments is this: Metals offer to men no advantages,
therefore we ought not to search them out. For whereas man is composed
of soul and body, neither is in want of minerals. The sweetest food of
the soul is the contemplation of nature, a knowledge of the finest arts
and sciences, an understanding of virtue; and if he interests his mind
in excellent things, if he exercise his body, he will be satisfied with
this feast of noble thoughts and knowledge, and have no desire for other
things. Now although the human body may be content with necessary food
and clothing, yet the fruits of the earth and the animals of different
kinds supply him in wonderful abundance with food and drink, from which
the body may be suitably nourished and strengthened and life prolonged
to old age. Flax, wool, and the skins of many animals provide plentiful
clothing low in price; while a luxurious kind, not hard to procure--that
is the so called _seric_ material, is furnished by the down of trees and
the webs of the silk worm. So that the body has absolutely no need of
the metals, so hidden in the depths of the earth and for the greater
part very expensive. Wherefore it is said that this maxim of Euripides
is approved in assemblies of learned men, and with good reason was
always on the lips of Socrates:

     "Works of silver and purple are of use, not for human life, but
     rather for Tragedians."[14]

These critics praise also this saying from Timocreon of Rhodes:

     "O Unseeing Plutus, would that thou hadst never appeared in the
     earth or in the sea or on the land, but that thou didst have
     thy habitation in Tartarus and Acheron, for out of thee arise
     all evil things which overtake mankind"[15].

They greatly extol these lines from Phocylides:

     "Gold and silver are injurious to mortals; gold is the source
     of crime, the plague of life, and the ruin of all things. Would
     that thou were not such an attractive scourge! because of thee
     arise robberies, homicides, warfare, brothers are maddened
     against brothers, and children against parents."

This from Naumachius also pleases them:

     "Gold and silver are but dust, like the stones that lie
     scattered on the pebbly beach, or on the margins of the
     rivers."

On the other hand, they censure these verses of Euripides:

     "Plutus is the god for wise men; all else is mere folly and at
     the same time a deception in words."

So in like manner these lines from Theognis:

     "O Plutus, thou most beautiful and placid god! whilst I have
     thee, however bad I am, I can be regarded as good."

They also blame Aristodemus, the Spartan, for these words:

     "Money makes the man; no one who is poor is either good or
     honoured."

And they rebuke these songs of Timocles:

     "Money is the life and soul of mortal men. He who has not
     heaped up riches for himself wanders like a dead man amongst
     the living."

Finally, they blame Menander when he wrote:

     "Epicharmus asserts that the gods are water, wind, fire, earth,
     sun, and stars. But I am of opinion that the gods of any use to
     us are silver and gold; for if thou wilt set these up in thy
     house thou mayest seek whatever thou wilt. All things will fall
     to thy lot; land, houses, slaves, silver-work; moreover
     friends, judges, and witnesses. Only give freely, for thus thou
     hast the gods to serve thee."

But besides this, the strongest argument of the detractors is that the
fields are devastated by mining operations, for which reason formerly
Italians were warned by law that no one should dig the earth for metals
and so injure their very fertile fields, their vineyards, and their
olive groves. Also they argue that the woods and groves are cut down,
for there is need of an endless amount of wood for timbers, machines,
and the smelting of metals. And when the woods and groves are felled,
then are exterminated the beasts and birds, very many of which furnish a
pleasant and agreeable food for man. Further, when the ores are washed,
the water which has been used poisons the brooks and streams, and either
destroys the fish or drives them away. Therefore the inhabitants of
these regions, on account of the devastation of their fields, woods,
groves, brooks and rivers, find great difficulty in procuring the
necessaries of life, and by reason of the destruction of the timber they
are forced to greater expense in erecting buildings. Thus it is said, it
is clear to all that there is greater detriment from mining than the
value of the metals which the mining produces.

So in fierce contention they clamour, showing by such examples as follow
that every great man has been content with virtue, and despised metals.
They praise Bias because he esteemed the metals merely as fortune's
playthings, not as his real wealth. When his enemies had captured his
native Priene, and his fellow-citizens laden with precious things had
betaken themselves to flight, he was asked by one, why he carried away
none of his goods with him, and he replied, "I carry all my possessions
with me." And it is said that Socrates, having received twenty minae
sent to him by Aristippus, a grateful disciple, refused them and sent
them back to him by the command of his conscience. Aristippus, following
his example in this matter, despised gold and regarded it as of no
value. And once when he was making a journey with his slaves, and they,
laden with the gold, went too slowly, he ordered them to keep only as
much of it as they could carry without distress and to throw away the
remainder[16]. Moreover, Anacreon of Teos, an ancient and noble poet,
because he had been troubled about them for two nights, returned five
talents which had been given him by Polycrates, saying that they were
not worth the anxiety which he had gone through on their account. In
like manner celebrated and exceedingly powerful princes have imitated
the philosophers in their scorn and contempt for gold and silver. There
was for example, Phocion, the Athenian, who was appointed general of the
army so many times, and who, when a large sum of gold was sent to him as
a gift by Alexander, King of Macedon, deemed it trifling and scorned it.
And Marcus Curius ordered the gold to be carried back to the Samnites,
as did also Fabricius Luscinus with regard to the silver and copper. And
certain Republics have forbidden their citizens the use and employment
of gold and silver by law and ordinance; the Lacedaemonians, by the
decrees and ordinances of Lycurgus, used diligently to enquire among
their citizens whether they possessed any of these things or not, and
the possessor, when he was caught, was punished according to law and
justice. The inhabitants of a town on the Tigris, called Babytace,
buried their gold in the ground so that no one should use it. The
Scythians condemned the use of gold and silver so that they might not
become avaricious.

Further are the metals reviled; in the first place people wantonly abuse
gold and silver and call them deadly and nefarious pests of the human
race, because those who possess them are in the greatest peril, for
those who have none lay snares for the possessors of wealth, and thus
again and again the metals have been the cause of destruction and ruin.
For example, Polymnestor, King of Thrace, to obtain possession of his
gold, killed Polydorus, his noble guest and the son of Priam, his
father-in-law, and old friend. Pygmalion, the King of Tyre, in order
that he might seize treasures of gold and silver, killed his sister's
husband, a priest, taking no account of either kinship or religion. For
love of gold Eriphyle betrayed her husband Amphiaraus to his enemy.
Likewise Lasthenes betrayed the city of Olynthus to Philip of Macedon.
The daughter of Spurius Tarpeius, having been bribed with gold, admitted
the Sabines into the citadel of Rome. Claudius Curio sold his country
for gold to Caesar, the Dictator. Gold, too, was the cause of the
downfall of Aesculapius, the great physician, who it was believed was
the son of Apollo. Similarly Marcus Crassus, through his eager desire
for the gold of the Parthians, was completely overcome together with his
son and eleven legions, and became the jest of his enemies; for they
poured liquid gold into the gaping mouth of the slain Crassus, saying:
"Thou hast thirsted for gold, therefore drink gold."

But why need I cite here these many examples from history?[17] It is
almost our daily experience to learn that, for the sake of obtaining
gold and silver, doors are burst open, walls are pierced, wretched
travellers are struck down by rapacious and cruel men born to theft,
sacrilege, invasion, and robbery. We see thieves seized and strung up
before us, sacrilegious persons burnt alive, the limbs of robbers broken
on the wheel, wars waged for the same reason, which are not only
destructive to those against whom they are waged, but to those also who
carry them on. Nay, but they say that the precious metals foster all
manner of vice, such as the seduction of women, adultery, and
unchastity, in short, crimes of violence against the person. Therefore
the Poets, when they represent Jove transformed into a golden shower and
falling into the lap of Danae, merely mean that he had found for himself
a safe road by the use of gold, by which he might enter the tower for
the purpose of violating the maiden. Moreover, the fidelity of many men
is overthrown by the love of gold and silver, judicial sentences are
bought, and innumerable crimes are perpetrated. For truly, as Propertius
says:

     "This is indeed the Golden Age. The greatest rewards come from
     gold; by gold love is won; by gold is faith destroyed; by gold
     is justice bought; the law follows the track of gold, while
     modesty will soon follow it when law is gone."

Diphilus says:

     "I consider that nothing is more powerful than gold. By it all
     things are torn asunder; all things are accomplished."

Therefore, all the noblest and best despise these riches, deservedly and
with justice, and esteem them as nothing. And this is said by the old
man in Plautus:

     "I hate gold. It has often impelled many people to many wrong
     acts."

In this country too, the poets inveigh with stinging reproaches against
money coined from gold and silver. And especially did Juvenal:

     "Since the majesty of wealth is the most sacred thing among us;
     although, O pernicious money, thou dost not yet inhabit a
     temple, nor have we erected altars to money."

And in another place:

     "Demoralising money first introduced foreign customs, and
     voluptuous wealth weakened our race with disgraceful
     luxury."[18]

And very many vehemently praise the barter system which men used before
money was devised, and which even now obtains among certain simple
peoples.

And next they raise a great outcry against other metals, as iron, than
which they say nothing more pernicious could have been brought into the
life of man. For it is employed in making swords, javelins, spears,
pikes, arrows--weapons by which men are wounded, and which cause
slaughter, robbery, and wars. These things so moved the wrath of Pliny
that he wrote: "Iron is used not only in hand to hand fighting, but also
to form the winged missiles of war, sometimes for hurling engines,
sometimes for lances, sometimes even for arrows. I look upon it as the
most deadly fruit of human ingenuity. For to bring Death to men more
quickly we have given wings to iron and taught it to fly."[19] The
spear, the arrow from the bow, or the bolt from the catapult and other
engines can be driven into the body of only one man, while the iron
cannon-ball fired through the air, can go through the bodies of many
men, and there is no marble or stone object so hard that it cannot be
shattered by the force and shock. Therefore it levels the highest towers
to the ground, shatters and destroys the strongest walls. Certainly the
ballistas which throw stones, the battering rams and other ancient war
engines for making breaches in walls of fortresses and hurling down
strongholds, seem to have little power in comparison with our present
cannon. These emit horrible sounds and noises, not less than thunder,
flashes of fire burst from them like the lightning, striking, crushing,
and shattering buildings, belching forth flames and kindling fires even
as lightning flashes. So that with more justice could it be said of the
impious men of our age than of Salmoneus of ancient days, that they had
snatched lightning from Jupiter and wrested it from his hands. Nay,
rather there has been sent from the infernal regions to the earth this
force for the destruction of men, so that Death may snatch to himself as
many as possible by one stroke.

But because muskets are nowadays rarely made of iron, and the large ones
never, but of a certain mixture of copper and tin, they confer more
maledictions on copper and tin than on iron. In this connection too,
they mention the brazen bull of Phalaris, the brazen ox of the people of
Pergamus, racks in the shape of an iron dog or a horse, manacles,
shackles, wedges, hooks, and red-hot plates. Cruelly racked by such
instruments, people are driven to confess crimes and misdeeds which they
have never committed, and innocent men are miserably tortured to death
by every conceivable kind of torment.

It is claimed too, that lead is a pestilential and noxious metal, for
men are punished by means of molten lead, as Horace describes in the ode
addressed to the Goddess Fortune: "Cruel Necessity ever goes before thee
bearing in her brazen hand the spikes and wedges, while the awful hook
and molten lead are also not lacking."[20] In their desire to excite
greater odium for this metal, they are not silent about the leaden balls
of muskets, and they find in it the cause of wounds and death.

They contend that, inasmuch as Nature has concealed metals far within
the depths of the earth, and because they are not necessary to human
life, they are therefore despised and repudiated by the noblest, and
should not be mined, and seeing that when brought to light they have
always proved the cause of very great evils, it follows that mining is
not useful to mankind, but on the contrary harmful and destructive.
Several good men have been so perturbed by these tragedies that they
conceive an intensely bitter hatred toward metals, and they wish
absolutely that metals had never been created, or being created, that no
one had ever dug them out. The more I commend the singular honesty,
innocence, and goodness of such men, the more anxious shall I be to
remove utterly and eradicate all error from their minds and to reveal
the sound view, which is that the metals are most useful to mankind.

In the first place then, those who speak ill of the metals and refuse to
make use of them, do not see that they accuse and condemn as wicked the
Creator Himself, when they assert that He fashioned some things vainly
and without good cause, and thus they regard Him as the Author of evils,
which opinion is certainly not worthy of pious and sensible men.

In the next place, the earth does not conceal metals in her depths
because she does not wish that men should dig them out, but because
provident and sagacious Nature has appointed for each thing its place.
She generates them in the veins, stringers, and seams in the rocks, as
though in special vessels and receptacles for such material. The metals
cannot be produced in the other elements because the materials for their
formation are wanting. For if they were generated in the air, a thing
that rarely happens, they could not find a firm resting-place, but by
their own force and weight would settle down on to the ground. Seeing
then that metals have their proper abiding place in the bowels of the
earth, who does not see that these men do not reach their conclusions by
good logic?

They say, "Although metals are in the earth, each located in its own
proper place where it originated, yet because they lie thus enclosed and
hidden from sight, they should not be taken out." But, in refutation of
these attacks, which are so annoying, I will on behalf of the metals
instance the fish, which we catch, hidden and concealed though they be
in the water, even in the sea. Indeed, it is far stranger that man, a
terrestrial animal, should search the interior of the sea than the
bowels of the earth. For as birds are born to fly freely through the
air, so are fishes born to swim through the waters, while to other
creatures Nature has given the earth that they might live in it, and
particularly to man that he might cultivate it and draw out of its
caverns metals and other mineral products. On the other hand, they say
that we eat fish, but neither hunger nor thirst is dispelled by
minerals, nor are they useful in clothing the body, which is another
argument by which these people strive to prove that metals should not be
taken out. But man without metals cannot provide those things which he
needs for food and clothing. For, though the produce of the land
furnishes the greatest abundance of food for the nourishment of our
bodies, no labour can be carried on and completed without tools. The
ground itself is turned up with ploughshares and harrows, tough stalks
and the tops of the roots are broken off and dug up with a mattock, the
sown seed is harrowed, the corn field is hoed and weeded; the ripe
grain with part of the stalk is cut down by scythes and threshed on the
floor, or its ears are cut off and stored in the barn and later beaten
with flails and winnowed with fans, until finally the pure grain is
stored in the granary, whence it is brought forth again when occasion
demands or necessity arises. Again, if we wish to procure better and
more productive fruits from trees and bushes, we must resort to
cultivating, pruning, and grafting, which cannot be done without tools.
Even as without vessels we cannot keep or hold liquids, such as milk,
honey, wine, or oil, neither could so many living things be cared for
without buildings to protect them from long-continued rain and
intolerable cold. Most of the rustic instruments are made of iron, as
ploughshares, share-beams, mattocks, the prongs of harrows, hoes,
planes, hay-forks, straw cutters, pruning shears, pruning hooks, spades,
lances, forks, and weed cutters. Vessels are also made of copper or
lead. Neither are wooden instruments or vessels made without iron. Wine
cellars, oil-mills, stables, or any other part of a farm building could
not be built without iron tools. Then if the bull, the wether, the goat,
or any other domestic animal is led away from the pasture to the
butcher, or if the poulterer brings from the farm a chicken, a hen, or a
capon for the cook, could any of these animals be cut up and divided
without axes and knives? I need say nothing here about bronze and copper
pots for cooking, because for these purposes one could make use of
earthen vessels, but even these in turn could not be made and fashioned
by the potter without tools, for no instruments can be made out of wood
alone, without the use of iron. Furthermore, hunting, fowling, and
fishing supply man with food, but when the stag has been ensnared does
not the hunter transfix him with his spear? As he stands or runs, does
he not pierce him with an arrow? Or pierce him with a bullet? Does not
the fowler in the same way kill the moor-fowl or pheasant with an arrow?
Or does he not discharge into its body the ball from the musket? I will
not speak of the snares and other instruments with which the woodcock,
woodpecker, and other wild birds are caught, lest I pursue unseasonably
and too minutely single instances. Lastly, with his fish-hook and net
does not the fisherman catch the fish in the sea, in the lakes, in
fish-ponds, or in rivers? But the hook is of iron, and sometimes we see
lead or iron weights attached to the net. And most fish that are caught
are afterward cut up and disembowelled with knives and axes. But, more
than enough has been said on the matter of food.

Now I will speak of clothing, which is made out of wool, flax, feathers,
hair, fur, or leather. First the sheep are sheared, then the wool is
combed. Next the threads are drawn out, while later the warp is
suspended in the shuttle under which passes the wool. This being struck
by the comb, at length cloth is formed either from threads alone or from
threads and hair. Flax, when gathered, is first pulled by hooks. Then it
is dipped in water and afterward dried, beaten into tow with a heavy
mallet, and carded, then drawn out into threads, and finally woven into
cloth. But has the artisan or weaver of the cloth any instrument not
made of iron? Can one be made of wood without the aid of iron? The
cloth or web must be cut into lengths for the tailor. Can this be done
without knife or scissors? Can the tailor sew together any garments
without a needle? Even peoples dwelling beyond the seas cannot make a
covering for their bodies, fashioned of feathers, without these same
implements. Neither can the furriers do without them in sewing together
the pelts of any kind of animals. The shoemaker needs a knife to cut the
leather, another to scrape it, and an awl to perforate it before he can
make shoes. These coverings for the body are either woven or stitched.
Buildings too, which protect the same body from rain, wind, cold, and
heat, are not constructed without axes, saws, and augers.

But what need of more words? If we remove metals from the service of
man, all methods of protecting and sustaining health and more carefully
preserving the course of life are done away with. If there were no
metals, men would pass a horrible and wretched existence in the midst of
wild beasts; they would return to the acorns and fruits and berries of
the forest. They would feed upon the herbs and roots which they plucked
up with their nails. They would dig out caves in which to lie down at
night, and by day they would rove in the woods and plains at random like
beasts, and inasmuch as this condition is utterly unworthy of humanity,
with its splendid and glorious natural endowment, will anyone be so
foolish or obstinate as not to allow that metals are necessary for food
and clothing and that they tend to preserve life?

Moreover, as the miners dig almost exclusively in mountains otherwise
unproductive, and in valleys invested in gloom, they do either slight
damage to the fields or none at all. Lastly, where woods and glades are
cut down, they may be sown with grain after they have been cleared from
the roots of shrubs and trees. These new fields soon produce rich crops,
so that they repair the losses which the inhabitants suffer from
increased cost of timber. Moreover, with the metals which are melted
from the ore, birds without number, edible beasts and fish can be
purchased elsewhere and brought to these mountainous regions.

I will pass to the illustrations I have mentioned. Bias of Priene, when
his country was taken, carried away out of the city none of his
valuables. So strong a man with such a reputation for wisdom had no need
to fear personal danger from the enemy, but this in truth cannot be said
of him because he hastily took to flight; the throwing away of his goods
does not seem to me so great a matter, for he had lost his house, his
estates, and even his country, than which nothing is more precious. Nay,
I should be convinced of Bias's contempt and scorn for possessions of
this kind, if before his country was captured he had bestowed them
freely on relations and friends, or had distributed them to the very
poor, for this he could have done freely and without question. Whereas
his conduct, which the Greeks admire so greatly, was due, it would seem,
to his being driven out by the enemy and stricken with fear. Socrates in
truth did not despise gold, but would not accept money for his teaching.
As for Aristippus of Cyrene, if he had gathered and saved the gold which
he ordered his slaves to throw away, he might have bought the things
which he needed for the necessaries of life, and he would not, by reason
of his poverty, have then been obliged to flatter the tyrant Dionysius,
nor would he ever have been called by him a King's dog. For this reason
Horace, speaking of Damasippus when reviling Staberus for valuing riches
very highly, says:

     "What resemblance has the Grecian Aristippus to this fellow? He
     who commanded his slaves to throw away the gold in the midst of
     Libya because they went too slowly, impeded by the weight of
     their burden--which of these two men is the more insane?"[21]

Insane indeed is he who makes more of riches than of virtue. Insane also
is he who rejects them and considers them as worth nothing, instead of
using them with reason. Yet as to the gold which Aristippus on another
occasion flung into the sea from a boat, this he did with a wise and
prudent mind. For learning that it was a pirate boat in which he was
sailing, and fearing for his life, he counted his gold and then throwing
it of his own will into the sea, he groaned as if he had done it
unwillingly. But afterward, when he escaped the peril, he said: "It is
better that this gold itself should be lost than that I should have
perished because of it." Let it be granted that some philosophers, as
well as Anacreon of Teos, despised gold and silver. Anaxagoras of
Clazomenae also gave up his sheep-farms and became a shepherd. Crates
the Theban too, being annoyed that his estate and other kinds of wealth
caused him worry, and that in his contemplations his mind was thereby
distracted, resigned a property valued at ten talents, and taking a
cloak and wallet, in poverty devoted all his thought and efforts to
philosophy. Is it true that because these philosophers despised money,
all others declined wealth in cattle? Did they refuse to cultivate lands
or to dwell in houses? There were certainly many, on the other hand,
who, though affluent, became famous in the pursuit of learning and in
the knowledge of divine and human laws, such as Aristotle, Cicero, and
Seneca. As for Phocion, he did not deem it honest to accept the gold
sent to him by Alexander. For if he had consented to use it, the king as
much as himself would have incurred the hatred and aversion of the
Athenians, and these very people were afterward so ungrateful toward
this excellent man that they compelled him to drink hemlock. For what
would have been less becoming to Marcus Curius and Fabricius Luscinus
than to accept gold from their enemies, who hoped that by these means
those leaders could be corrupted or would become odious to their fellow
citizens, their purpose being to cause dissentions among the Romans and
destroy the Republic utterly. Lycurgus, however, ought to have given
instructions to the Spartans as to the use of gold and silver, instead
of abolishing things good in themselves. As to the Babytacenses, who
does not see that they were senseless and envious? For with their gold
they might have bought things of which they were in need, or even given
it to neighbouring peoples to bind them more closely to themselves with
gifts and favours. Finally, the Scythians, by condemning the use of gold
and silver alone, did not free themselves utterly from avarice, because
although he is not enjoying them, one who can possess other forms of
property may also become avaricious.

Now let us reply to the attacks hurled against the products of mines. In
the first place, they call gold and silver the scourge of mankind
because they are the cause of destruction and ruin to their possessors.
But in this manner, might not anything that we possess be called a
scourge to human kind,--whether it be a horse, or a garment, or anything
else? For, whether one rides a splendid horse, or journeys well clad, he
would give occasion to a robber to kill him. Are we then not to ride on
horses, but to journey on foot, because a robber has once committed a
murder in order that he may steal a horse? Or are we not to possess
clothing, because a vagabond with a sword has taken a traveller's life
that he may rob him of his garment? The possession of gold and silver is
similar. Seeing then that men cannot conveniently do all these things,
we should be on our guard against robbers, and because we cannot always
protect ourselves from their hands, it is the special duty of the
magistrate to seize wicked and villainous men for torture, and, if need
be, for execution.

Again, the products of the mines are not themselves the cause of war.
Thus, for example, when a tyrant, inflamed with passion for a woman of
great beauty, makes war on the inhabitants of her city, the fault lies
in the unbridled lust of the tyrant and not in the beauty of the woman.
Likewise, when another man, blinded by a passion for gold and silver,
makes war upon a wealthy people, we ought not to blame the metals but
transfer all blame to avarice. For frenzied deeds and disgraceful
actions, which are wont to weaken and dishonour natural and civil laws,
originate from our own vices. Wherefore Tibullus is wrong in laying the
blame for war on gold, when he says: "This is the fault of a rich man's
gold; there were no wars when beech goblets were used at banquets." But
Virgil, speaking of Polymnestor, says that the crime of the murderer
rests on avarice:

     "He breaks all law; he murders Polydorus, and obtains gold by
     violence. To what wilt thou not drive mortal hearts, thou
     accursed hunger for gold?"

And again, justly, he says, speaking of Pygmalion, who killed Sichaeus:

     "And blinded with the love of gold, he slew him unawares with
     stealthy sword."[22]

For lust and eagerness after gold and other things make men blind, and
this wicked greed for money, all men in all times and places have
considered dishonourable and criminal. Moreover, those who have been so
addicted to avarice as to be its slaves have always been regarded as
mean and sordid. Similarly, too, if by means of gold and silver and gems
men can overcome the chastity of women, corrupt the honour of many
people, bribe the course of justice and commit innumerable wickednesses,
it is not the metals which are to be blamed, but the evil passions of
men which become inflamed and ignited; or it is due to the blind and
impious desires of their minds. But although these attacks against gold
and silver may be directed especially against money, yet inasmuch as the
Poets one after another condemn it, their criticism must be met, and
this can be done by one argument alone. Money is good for those who use
it well; it brings loss and evil to those who use it ill. Hence, very
rightly, Horace says:

     "Dost thou not know the value of money; and what uses it
     serves? It buys bread, vegetables, and a pint of wine."

And again in another place:

     "Wealth hoarded up is the master or slave of each possessor; it
     should follow rather than lead, the 'twisted rope.'"[23]

When ingenious and clever men considered carefully the system of barter,
which ignorant men of old employed and which even to-day is used by
certain uncivilised and barbarous races, it appeared to them so
troublesome and laborious that they invented money. Indeed, nothing more
useful could have been devised, because a small amount of gold and
silver is of as great value as things cumbrous and heavy; and so peoples
far distant from one another can, by the use of money, trade very easily
in those things which civilised life can scarcely do without.

The curses which are uttered against iron, copper, and lead have no
weight with prudent and sensible men, because if these metals were done
away with, men, as their anger swelled and their fury became unbridled,
would assuredly fight like wild beasts with fists, heels, nails, and
teeth. They would strike each other with sticks, hit one another with
stones, or dash their foes to the ground. Moreover, a man does not kill
another with iron alone, but slays by means of poison, starvation, or
thirst. He may seize him by the throat and strangle him; he may bury him
alive in the ground; he may immerse him in water and suffocate him; he
may burn or hang him; so that he can make every element a participant in
the death of men. Or, finally, a man may be thrown to the wild beasts.
Another may be sewn up wholly except his head in a sack, and thus be
left to be devoured by worms; or he may be immersed in water until he is
torn to pieces by sea-serpents. A man may be boiled in oil; he may be
greased, tied with ropes, and left exposed to be stung by flies and
hornets; he may be put to death by scourging with rods or beating with
cudgels, or struck down by stoning, or flung from a high place.
Furthermore, a man may be tortured in more ways than one without the use
of metals; as when the executioner burns the groins and armpits of his
victim with hot wax; or places a cloth in his mouth gradually, so that
when in breathing he draws it slowly into his gullet, the executioner
draws it back suddenly and violently; or the victim's hands are fastened
behind his back, and he is drawn up little by little with a rope and
then let down suddenly. Or similarly, he may be tied to a beam and a
heavy stone fastened by a cord to his feet, or finally his limbs may be
torn asunder. From these examples we see that it is not metals that are
to be condemned, but our vices, such as anger, cruelty, discord, passion
for power, avarice, and lust.

The question next arises, whether we ought to count metals amongst the
number of good things or class them amongst the bad. The Peripatetics
regarded all wealth as a good thing, and merely spoke of externals as
having to do with neither the mind nor the body. Well, let riches be an
external thing. And, as they said, many other things may be classed as
good if it is in one's power to use them either well or ill. For good
men employ them for good, and to them they are useful. The wicked use
them badly, and to them they are harmful. There is a saying of Socrates,
that just as wine is influenced by the cask, so the character of riches
is like their possessors. The Stoics, whose custom it is to argue subtly
and acutely, though they did not put wealth in the category of good
things, they did not count it amongst the evil ones, but placed it in
that class which they term neutral. For to them virtue alone is good,
and vice alone evil. The whole of what remains is indifferent. Thus, in
their conviction, it matters not whether one be in good health or
seriously ill; whether one be handsome or deformed. In short:

     "Whether, sprung from Inachus of old, and thus hast lived
     beneath the sun in wealth, or hast been poor and despised among
     men, it matters not."

For my part, I see no reason why anything that is in itself of use
should not be placed in the class of good things. At all events, metals
are a creation of Nature, and they supply many varied and necessary
needs of the human race, to say nothing about their uses in adornment,
which are so wonderfully blended with utility. Therefore, it is not
right to degrade them from the place they hold among the good things. In
truth, if there is a bad use made of them, should they on that account
be rightly called evils? For of what good things can we not make an
equally bad or good use? Let me give examples from both classes of what
we term good. Wine, by far the best drink, if drunk in moderation, aids
the digestion of food, helps to produce blood, and promotes the juices
in all parts of the body. It is of use in nourishing not only the body
but the mind as well, for it disperses our dark and gloomy thoughts,
frees us from cares and anxiety, and restores our confidence. If drunk
in excess, however, it injures and prostrates the body with serious
disease. An intoxicated man keeps nothing to himself; he raves and
rants, and commits many wicked and infamous acts. On this subject
Theognis wrote some very clever lines, which we may render thus:

     "Wine is harmful if taken with greedy lips, but if drunk in
     moderation it is wholesome."[25]

But I linger too long over extraneous matters. I must pass on to the
gifts of body and mind, amongst which strength, beauty, and genius occur
to me. If then a man, relying on his strength, toils hard to maintain
himself and his family in an honest and respectable manner, he uses the
gift aright, but if he makes a living out of murder and robbery, he uses
it wrongly. Likewise, too, if a lovely woman is anxious to please her
husband alone she uses her beauty aright, but if she lives wantonly and
is a victim of passion, she misuses her beauty. In like manner, a youth
who devotes himself to learning and cultivates the liberal arts, uses
his genius rightly. But he who dissembles, lies, cheats, and deceives by
fraud and dishonesty, misuses his abilities. Now, the man who, because
they are abused, denies that wine, strength, beauty, or genius are good
things, is unjust and blasphemous towards the Most High God, Creator of
the World; so he who would remove metals from the class of blessings
also acts unjustly and blasphemously against Him. Very true, therefore,
are the words which certain Greek poets have written, as Pindar:

     "Money glistens, adorned with virtue; it supplies the means by
     which thou mayest act well in whatever circumstances fate may
     have in store for thee."[26]

And Sappho:

     "Without the love of virtue gold is a dangerous and harmful
     guest, but when it is associated with virtue, it becomes the
     source and height of good."

And Callimachus:

     "Riches do not make men great without virtue; neither do
     virtues themselves make men great without some wealth."

And Antiphanes:

     "Now, by the gods, why is it necessary for a man to grow rich?
     Why does he desire to possess much money unless that he may, as
     much as possible, help his friends, and sow the seeds of a
     harvest of gratitude, sweetest of the goddesses."[27]

Having thus refuted the arguments and contentions of adversaries, let us
sum up the advantages of the metals. In the first place, they are useful
to the physician, for they furnish liberally the ingredients for
medicines, by which wounds and ulcers are cured, and even plagues; so
that certainly if there were no other reasons why we should explore the
depths of the earth, we should for the sake of medicine alone dig in the
mines. Again, the metals are of use to painters, because they yield
certain pigments which, when united with the painter's slip, are injured
less than others by the moisture from without. Further, mining is useful
to the architects, for thus is found marble, which is suitable not only
for strengthening large buildings, but also for decoration. It is,
moreover, helpful to those whose ambition urges them toward immortal
glory, because it yields metals from which are made coins, statues, and
other monuments, which, next to literary records, give men in a sense
immortality. The metals are useful to merchants with very great cause,
for, as I have stated elsewhere, the use of money which is made from
metals is much more convenient to mankind than the old system of
exchange of commodities. In short, to whom are the metals not of use? In
very truth, even the works of art, elegant, embellished, elaborate,
useful, are fashioned in various shapes by the artist from the metals
gold, silver, brass, lead, and iron. How few artists could make
anything that is beautiful and perfect without using metals? Even if
tools of iron or brass were not used, we could not make tools of wood
and stone without the help of metal. From all these examples are evident
the benefits and advantages derived from metals. We should not have had
these at all unless the science of mining and metallurgy had been
discovered and handed down to us. Who then does not understand how
highly useful they are, nay rather, how necessary to the human race? In
a word, man could not do without the mining industry, nor did Divine
Providence will that he should.

Further, it has been asked whether to work in metals is honourable
employment for respectable people or whether it is not degrading and
dishonourable. We ourselves count it amongst the honourable arts. For
that art, the pursuit of which is unquestionably not impious, nor
offensive, nor mean, we may esteem honourable. That this is the nature
of the mining profession, inasmuch as it promotes wealth by good and
honest methods, we shall show presently. With justice, therefore, we may
class it amongst honourable employments. In the first place, the
occupation of the miner, which I must be allowed to compare with other
methods of acquiring great wealth, is just as noble as that of
agriculture; for, as the farmer, sowing his seed in his fields injures
no one, however profitable they may prove to him, so the miner digging
for his metals, albeit he draws forth great heaps of gold or silver,
hurts thereby no mortal man. Certainly these two modes of increasing
wealth are in the highest degree both noble and honourable. The booty of
the soldier, however, is frequently impious, because in the fury of the
fighting he seizes all goods, sacred as well as profane. The most just
king may have to declare war on cruel tyrants, but in the course of it
wicked men cannot lose their wealth and possessions without dragging
into the same calamity innocent and poor people, old men, matrons,
maidens, and orphans. But the miner is able to accumulate great riches
in a short time, without using any violence, fraud, or malice. That old
saying is, therefore, not always true that "Every rich man is either
wicked himself, or is the heir to wickedness."

Some, however, who contend against us, censure and attack miners by
saying that they and their children must needs fall into penury after a
short time, because they have heaped up riches by improper means.
According to them nothing is truer than the saying of the poet Naevius:

  "Ill gotten gains in ill fashion slip away."

The following are some of the wicked and sinful methods by which they
say men obtain riches from mining. When a prospect of obtaining metals
shows itself in a mine, either the ruler or magistrate drives out the
rightful owners of the mines from possession, or a shrewd and cunning
neighbour perhaps brings a law-suit against the old possessors in order
to rob them of some part of their property. Or the mine superintendent
imposes on the owners such a heavy contribution on shares, that if they
cannot pay, or will not, they lose their rights of possession; while the
superintendent, contrary to all that is right, seizes upon all that they
have lost. Or, finally, the mine foreman may conceal the vein by
plastering over with clay that part where the metal abounds, or by
covering it with earth, stones, stakes, or poles, in the hope that after
several years the proprietors, thinking the mine exhausted, will abandon
it, and the foreman can then excavate that remainder of the ore and keep
it for himself. They even state that the scum of the miners exist wholly
by fraud, deceit, and lying. For to speak of nothing else, but only of
those deceits which are practised in buying and selling, it is said they
either advertise the veins with false and imaginary praises, so that
they can sell the shares in the mines at one-half more than they are
worth, or on the contrary, they sometimes detract from the estimate of
them so that they can buy shares for a small price. By exposing such
frauds our critics suppose all good opinion of miners is lost. Now, all
wealth, whether it has been gained by good or evil means, is liable by
some adverse chance to vanish away. It decays and is dissipated by the
fault and carelessness of the owner, since he loses it through laziness
and neglect, or wastes and squanders it in luxuries, or he consumes and
exhausts it in gifts, or he dissipates and throws it away in gambling:

"Just as though money sprouted up again, renewed from an exhausted
coffer, and was always to be obtained from a full heap."

It is therefore not to be wondered at if miners do not keep in mind the
counsel given by King Agathocles: "Unexpected fortune should be held in
reverence," for by not doing so they fall into penury; and particularly
when the miners are not content with moderate riches, they not rarely
spend on new mines what they have accumulated from others. But no just
ruler or magistrate deprives owners of their possessions; that, however,
may be done by a tyrant, who may cruelly rob his subjects not only of
their goods honestly obtained, but even of life itself. And yet whenever
I have inquired into the complaints which are in common vogue, I always
find that the owners who are abused have the best of reasons for driving
the men from the mines; while those who abuse the owners have no reason
to complain about them. Take the case of those who, not having paid
their contributions, have lost the right of possession, or those who
have been expelled by the magistrate out of another man's mine: for some
wicked men, mining the small veins branching from the veins rich in
metal, are wont to invade the property of another person. So the
magistrate expels these men accused of wrong, and drives them from the
mine. They then very frequently spread unpleasant rumours concerning
this amongst the populace. Or, to take another case: when, as often
happens, a dispute arises between neighbours, arbitrators appointed by
the magistrate settle it, or the regular judges investigate and give
judgment. Consequently, when the judgment is given, inasmuch as each
party has consented to submit to it, neither side should complain of
injustice; and when the controversy is adjudged, inasmuch as the
decision is in accordance with the laws concerning mining, one of the
parties cannot be injured by the law. I do not vigorously contest the
point, that at times a mine superintendent may exact a larger
contribution from the owners than necessity demands. Nay, I will admit
that a foreman may plaster over, or hide with a structure, a vein where
it is rich in metals. Is the wickedness of one or two to brand the many
honest with fraud and trickery? What body is supposed to be more pious
and virtuous in the Republic than the Senate? Yet some Senators have
been detected in peculations, and have been punished. Is this any reason
that so honourable a house should lose its good name and fame? The
superintendent cannot exact contributions from the owners without the
knowledge and permission of the Bergmeister or the deputies; for this
reason deception of this kind is impossible. Should the foremen be
convicted of fraud, they are beaten with rods; or of theft, they are
hanged. It is complained that some sellers and buyers of the shares in
mines are fraudulent. I concede it. But can they deceive anyone except a
stupid, careless man, unskilled in mining matters? Indeed, a wise and
prudent man, skilled in this art, if he doubts the trustworthiness of a
seller or buyer, goes at once to the mine that he may for himself
examine the vein which has been so greatly praised or disparaged, and
may consider whether he will buy or sell the shares or not. But people
say, though such an one can be on his guard against fraud, yet a simple
man and one who is easily credulous, is deceived. But we frequently see
a man who is trying to mislead another in this way deceive himself, and
deservedly become a laughing-stock for everyone; or very often the
defrauder as well as the dupe is entirely ignorant of mining. If, for
instance, a vein has been found to be abundant in ore, contrary to the
idea of the would-be deceiver, then he who was to have been cheated gets
a profit, and he who has been the deceiver loses. Nevertheless, the
miners themselves rarely buy or sell shares, but generally they have
_jurati venditores_[28] who buy and sell at such prices as they have
been instructed to give or accept. Seeing therefore, that magistrates
decide disputes on fair and just principles, that honest men deceive
nobody, while a dishonest one cannot deceive easily, or if he does he
cannot do so with impunity, the criticism of those who wish to disparage
the honesty of miners has therefore no force or weight.

In the next place, the occupation of the miner is objectionable to
nobody. For who, unless he be naturally malevolent and envious, will
hate the man who gains wealth as it were from heaven? Or who will hate a
man who to amplify his fortune, adopts a method which is free from
reproach? A moneylender, if he demands an excessive interest, incurs the
hatred of men. If he demands a moderate and lawful rate, so that he is
not injurious to the public generally and does not impoverish them, he
fails to become very rich from his business. Further, the gain derived
from mining is not sordid, for how can it be such, seeing that it is so
great, so plentiful, and of so innocent a nature. A merchant's profits
are mean and base when he sells counterfeit and spurious merchandise, or
puts far too high a price on goods that he has purchased for little; for
this reason the merchant would be held in no less odium amongst good
men than is the usurer, did they not take account of the risk he runs to
secure his merchandise. In truth, those who on this point speak
abusively of mining for the sake of detracting from its merits, say that
in former days men convicted of crimes and misdeeds were sentenced to
the mines and were worked as slaves. But to-day the miners receive pay,
and are engaged like other workmen in the common trades.

Certainly, if mining is a shameful and discreditable employment for a
gentleman because slaves once worked mines, then agriculture also will
not be a very creditable employment, because slaves once cultivated the
fields, and even to-day do so among the Turks; nor will architecture be
considered honest, because some slaves have been found skilful in that
profession; nor medicine, because not a few doctors have been slaves;
nor will any other worthy craft, because men captured by force of arms
have practised it. Yet agriculture, architecture, and medicine are none
the less counted amongst the number of honourable professions;
therefore, mining ought not for this reason to be excluded from them.
But suppose we grant that the hired miners have a sordid employment. We
do not mean by miners only the diggers and other workmen, but also those
skilled in the mining arts, and those who invest money in mines. Amongst
them can be counted kings, princes, republics, and from these last the
most esteemed citizens. And finally, we include amongst the overseers of
mines the noble Thucydides, the historian, whom the Athenians placed in
charge of the mines of Thasos.[29] And it would not be unseemly for the
owners themselves to work with their own hands on the works or ore,
especially if they themselves have contributed to the cost of the mines.
Just as it is not undignified for great men to cultivate their own land.
Otherwise the Roman Senate would not have created Dictator L. Quintius
Cincinnatus, as he was at work in the fields, nor would it have summoned
to the Senate House the chief men of the State from their country
villas. Similarly, in our day, Maximilian Caesar would not have enrolled
Conrad in the ranks of the nobles known as Counts; Conrad was really
very poor when he served in the mines of Schneeberg, and for that reason
he was nicknamed the "poor man"; but not many years after, he attained
wealth from the mines of Fuerst, which is a city in Lorraine, and took
his name from "Luck."[30] Nor would King Vladislaus have restored to the
Assembly of Barons, Tursius, a citizen of Cracow, who became rich
through the mines in that part of the kingdom of Hungary which was
formerly called Dacia.[31] Nay, not even the common worker in the mines
is vile and abject. For, trained to vigilance and work by night and day,
he has great powers of endurance when occasion demands, and easily
sustains the fatigues and duties of a soldier, for he is accustomed to
keep long vigils at night, to wield iron tools, to dig trenches, to
drive tunnels, to make machines, and to carry burdens. Therefore,
experts in military affairs prefer the miner, not only to a commoner
from the town, but even to the rustic.

But to bring this discussion to an end, inasmuch as the chief callings
are those of the moneylender, the soldier, the merchant, the farmer, and
the miner, I say, inasmuch as usury is odious, while the spoil cruelly
captured from the possessions of the people innocent of wrong is wicked
in the sight of God and man, and inasmuch as the calling of the miner
excels in honour and dignity that of the merchant trading for lucre,
while it is not less noble though far more profitable than agriculture,
who can fail to realize that mining is a calling of peculiar dignity?
Certainly, though it is but one of ten important and excellent methods
of acquiring wealth in an honourable way, a careful and diligent man can
attain this result in no easier way than by mining.

     END OF BOOK I.


FOOTNOTES:

[1] _Fibrae_--"fibres." See Note 6, p. 70.

[2] _Commissurae saxorum_--"rock joints," "seams," or "cracks." Agricola
and all of the old authors laid a wholly unwarranted geologic value on
these phenomena. See description and footnotes, Book III., pages 43 and
72.

[3] _Succi_--"juice," or _succi concreti_--"solidified juice." Ger.
Trans., _saffte_. The old English translators and mineralogists often
use the word juices in the same sense, and we have adopted it. The words
"solutions" and "salts" convey a chemical significance not warranted by
the state of knowledge in Agricola's time. Instances of the former use
of this word may be seen in Barba's "First Book of the Art of Metals,"
(Trans. Earl Sandwich, London, 1674, p. 2, etc.,) and in Pryce's
_Mineralogia Cornubiensis_ (London, 1778, p. 25, 32).

[4] In order that the reader should be able to grasp the author's point
of view as to his divisions of the Mineral Kingdom, we introduce here
his own statement from _De Natura Fossilium_, (p. 180). It is also
desirable to read the footnote on his theory of ore-deposits on pages 43
to 53, and the review of _De Natura Fossilium_ given in the Appendix.

"The subterranean inanimate bodies are divided into two classes, one of
which, because it is a fluid or an exhalation, is called by those names,
and the other class is called the minerals. Mineral bodies are
solidified from particles of the same substance, such as pure gold, each
particle of which is gold, or they are of different substances such as
lumps which consist of earth, stone, and metal; these latter may be
separated into earth, stone and metal, and therefore the first is not a
mixture while the last is called a mixture. The first are again divided
into simple and compound minerals. The simple minerals are of four
classes, namely earths, solidified juices, stones and metals, while the
mineral compounds are of many sorts, as I shall explain later.

"Earth is a simple mineral body which may be kneaded in the hands when
moistened, or from which lute is made when it has been wetted. Earth,
properly so called, is found enclosed in veins or veinlets, or
frequently on the surface in fields and meadows. This definition is a
general one. The harder earth, although moistened by water, does not at
once become lute, but does turn into lute if it remains in water for
some time. There are many species of earths, some of which have names
but others are unnamed.

"Solidified juices are dry and somewhat hard (_subdurus_) mineral bodies
which when moistened with water do not soften but liquefy instead; or if
they do soften, they differ greatly from the earths by their
unctuousness (_pingue_) or by the material of which they consist.
Although occasionally they have the hardness of stone, yet because they
preserve the form and nature which they had when less hard, they can
easily be distinguished from the stones. The juices are divided into
'meagre' and unctuous (_macer et pinguis_). The 'meagre' juices, since
they originate from three different substances, are of three species.
They are formed from a liquid mixed with earth, or with metal, or with a
mineral compound. To the first species belong salt and _Nitrum_ (soda);
to the second, chrysocolla, verdigris, iron-rust, and azure; to the
third, vitriol, alum, and an acrid juice which is unnamed. The first two
of these latter are obtained from pyrites, which is numbered amongst the
compound minerals. The third of these comes from _Cadmia_ (in this case
the cobalt-zinc-arsenic minerals; the acrid juice is probably zinc
sulphate). To the unctuous juices belong these species: sulphur,
bitumen, realgar and orpiment. Vitriol and alum, although they are
somewhat unctuous yet do not burn, and they differ in their origin from
the unctuous juices, for the latter are forced out from the earth by
heat, whereas the former are produced when pyrites is softened by
moisture.

"Stone is a dry and hard mineral body which may either be softened by
remaining for a long time in water and be reduced to powder by a fierce
fire; or else it does not soften with water but the heat of a great fire
liquefies it. To the first species belong those stones which have been
solidified by heat, to the second those solidified (literally
'congealed') by cold. These two species of stones are constituted from
their own material. However, writers on natural subjects who take into
consideration the quantity and quality of stones and their value, divide
them into four classes. The first of these has no name of its own but is
called in common parlance 'stone': to this class belong loadstone,
jasper (or bloodstone) and _Aetites_ (geodes?). The second class
comprises hard stones, either pellucid or ornamental, with very
beautiful and varied colours which sparkle marvellously; they are called
gems. The third comprises stones which are only brilliant after they
have been polished, and are usually called marble. The fourth are called
rocks; they are found in quarries, from which they are hewn out for use
in building, and they are cut into various shapes. None of the rocks
show colour or take a polish. Few of the stones sparkle; fewer still are
transparent. Marble is sometimes only distinguishable from opaque gems
by its volume; rock is always distinguishable from stones properly
so-called by its volume. Both the stones and the gems are usually to be
found in veins and veinlets which traverse the rocks and marble. These
four classes, as I have already stated, are divided into many species,
which I will explain in their proper place.

"Metal is a mineral body, by nature either liquid or somewhat hard. The
latter may be melted by the heat of the fire, but when it has cooled
down again and lost all heat, it becomes hard again and resumes its
proper form. In this respect it differs from the stone which melts in
the fire, for although the latter regain its hardness, yet it loses its
pristine form and properties. Traditionally there are six different
kinds of metals, namely gold, silver, copper, iron, tin and lead. There
are really others, for quicksilver is a metal, although the Alchemists
disagree with us on this subject, and bismuth is also. The ancient Greek
writers seem to have been ignorant of bismuth, wherefore Ammonius
rightly states that there are many species of metals, animals, and
plants which are unknown to us. _Stibium_ when smelted in the crucible
and refined has as much right to be regarded as a proper metal as is
accorded to lead by writers. If when smelted, a certain portion be added
to tin, a bookseller's alloy is produced from which the type is made
that is used by those who print books on paper. Each metal has its own
form which it preserves when separated from those metals which were
mixed with it. Therefore neither electrum nor _Stannum_ is of itself a
real metal, but rather an alloy of two metals. Electrum is an alloy of
gold and silver, _Stannum_ of lead and silver (see note 33, p. 473). And
yet if silver be parted from the electrum, then gold remains and not
electrum; if silver be taken away from _Stannum_, then lead remains and
not _Stannum_. Whether brass, however, is found as a native metal or
not, cannot be ascertained with any surety. We only know of the
artificial brass, which consists of copper tinted with the colour of the
mineral calamine. And yet if any should be dug up, it would be a proper
metal. Black and white copper seem to be different from the red kind.
Metal, therefore, is by nature either solid, as I have stated, or fluid,
as in the unique case of quicksilver. But enough now concerning the
simple kinds.

"I will now speak of the compounds which are composed of the simple
minerals cemented together by nature, and under the word 'compound' I
now discuss those mineral bodies which consist of two or three simple
minerals. They are likewise mineral substances, but so thoroughly mixed
and alloyed that even in the smallest part there is not wanting any
substance that is contained in the whole. Only by the force of the fire
is it possible to separate one of the simple mineral substances from
another; either the third from the other two, or two from the third, if
there were three in the same compound. These two, three or more bodies
are so completely mixed into one new species that the pristine form of
none of these is recognisable.

"The 'mixed' minerals, which are composed of those same simple minerals,
differ from the 'compounds,' in that the simple minerals each preserves
its own form so that they can be separated one from the other not only
by fire but sometimes by water and sometimes by hand. As these two
classes differ so greatly from one another I usually use two different
words in order to distinguish one from the other. I am well aware that
Galen calls the metallic earth a compound which is really a mixture, but
he who wishes to instruct others should bestow upon each separate thing
a definite name."

For convenience of reference we may reduce the above to a diagram as
follows:

  1. Fluids and gases.

                              {              { Earths
                              { (a) Simple   { Solidified juices
                              {     minerals { Stones
                              {              { Metals
             { A. Homogenous  {
             {    bodies      {
             {                { (b) Compound { Being heterogeneous mixtures
             {                {     minerals {       of (a)
             {
  2. Mineral {
     bodies  {
             {
             { B. Mixtures. Being homogenous mixtures of (a)

[5] _Experiendae_--"a trial." That actual assaying in its technical
sense is meant, is sufficiently evident from Book VII.

[6] _... plumbum ... candidum ac cinereum vel nigrum_. "Lead ... white,
or ash-coloured, or black." Agricola himself coined the term _plumbum
cinereum_ for bismuth, no doubt following the Roman term for
tin--_plumbum candidum_. The following passage from _Bermannus_ (p. 439)
is of interest, for it appears to be the first description of bismuth,
although mention of it occurs in the _Nuetzlich Bergbuechlin_ (see
Appendix B). "_Bermannus_: I will show you another kind of mineral which
is numbered amongst metals, but appears to me to have been unknown to
the Ancients; we call it _bisemutum_. _Naevius_: Then in your opinion
there are more kinds of metals than the seven commonly believed?
_Bermannus_: More, I consider; for this which just now I said we called
_bisemutum_, cannot correctly be called _plumbum candidum_ (tin), nor
_nigrum_ (lead), but is different from both and is a third one. _Plumbum
candidum_ is whiter and _plumbum nigrum_ is darker, as you see.
_Naevius_: We see that this is of the colour of _galena_. _Ancon_: How
then can _bisemutum_, as you call it, be distinguished from _galena_?
_Bermannus_: Easily; when you take it in your hands it stains them with
black, unless it is quite hard. The hard kind is not friable like
_galena_, but can be cut. It is blacker than the kind of _rudis_ silver
which we say is almost the colour of lead, and thus is different from
both. Indeed, it not rarely contains some silver. It generally indicates
that there is silver beneath the place where it is found, and because of
this our miners are accustomed to call it the 'roof of silver.' They are
wont to roast this mineral, and from the better part they make metal;
from the poorer part they make a pigment of a kind not to be despised."

[7] _Nitrum._ The Ancients comprised many salts under this head, but
Agricola in the main uses it for soda, although sometimes he includes
potash. He usually, however, refers to potash as _lixivium_ or salt
therefrom, and by other distinctive terms. For description of method of
manufacture and discussion, see Book XII., p. 558.

[8] _Atramentum sutorium_--"Shoemaker's blacking." See p. 572 for
description of method of manufacture and historical footnote. In the
main Agricola means green vitriol, but he does describe three main
varieties, green, blue, and white (_De Natura Fossilium_, p. 219). The
blue was of course copper sulphate, and it is fairly certain that the
white was zinc vitriol.

[9] _Lavandi_--"Washing." By this term the author includes all the
operations of sluicing, buddling, and wet concentration generally. There
is no English equivalent of such wide application, and there is some
difficulty in interpretation without going further than the author
intends. Book VIII. is devoted to the subject.

[10] _Operam et oleum perdit_--"loss of labour and oil."

[11] In _Veteribus et Novis Metallis_, and _Bermannus_, Agricola states
that the mines of Schemnitz were worked 800 years before that time
(1530), or about 750 A.D., and, further, that the lead mines of Goslar
in the Hartz were worked by Otho the Great (936-973), and that the
silver mines at Freiberg were discovered during the rule of Prince Otho
(about 1170). To continue the argument to-day we could add about 360
years more of life to the mines of Goslar and Freiberg. See also Note
16, p. 36, and note 19, p. 37.

[12] Xenophon. Essay on the Revenues of Athens, I., 5.

[13] Ovid, _Metamorphoses_, I., 137 to 143.

[14] Diogenes Laertius, II., 5. The lines are assigned, however, to
Philemon, not Euripides. (Kock, _Comicorum Atticorum Fragmenta_ II.,
512).

[15] We have not considered it of sufficient interest to cite the
references to all of the minor poets and those whose preserved works are
but fragmentary. The translations from the Greek into Latin are not
literal and suffer again by rendering into English; we have however
considered it our duty to translate Agricola's view of the meaning.

[16] Diogenes Laertius, II.

[17] An inspection of the historical incidents mentioned here and
further on, indicates that Agricola relied for such information on
Diogenes Laertius, Plutarch, Livy, Valerius Maximus, Pliny, and often
enough on Homer, Horace, and Virgil.

[18] Juvenal. _Satires_ I., l. 112, and VI., l. 298.

[19] Pliny, XXXIV., 39.

[20] Horace. _Odes_, I., 35, ll. 17-20.

[21] Horace. _Satires_, II., 3, ll. 99-102.

[22] Virgil. _AEneid_, III., l. 55, and I., l. 349.

[23] Horace. _Satires_, I., l. 73; and Epistle, I., 10, l. 47.

[25] Theognis. Maxims, II., l. 210.

[26] Pindar. _Olymp._ II., 58-60.

[27] Antiphanes, 4.

[28] _Jurati Venditores_--"Sworn brokers." (?)

[29] There is no doubt that Thucydides had some connection with gold
mines; he himself is the authority for the statement that he worked
mines in Thrace. Agricola seems to have obtained his idea that
Thucydides held an appointment from the Athenians in charge of mines in
Thasos, from Marcellinus (_Vita_, Thucydides, 30), who also says that
Thucydides obtained possession of mines in Thrace through his marriage
with a Thracian woman, and that it was while residing on the mines at
Scapte-Hyle that he wrote his history. Later scholars, however, find
little warrant for these assertions. The gold mines of Thasos--an island
off the mainland of Thrace--are frequently mentioned by the ancient
authors. Herodotus, VI., 46-47, says:--"Their (the Thasians') revenue
was derived partly from their possessions upon the mainland, partly from
the mines which they owned. They were masters of the gold mines of
Scapte-Hyle, the yearly produce of which amounted to eighty talents.
Their mines in Thasos yielded less, but still were so prolific that
besides being entirely free from land-tax they had a surplus of income
derived from the two sources of their territory on the mainland and
their mines, in common years two hundred and in best years three hundred
talents. I myself have seen the mines in question. By far the most
curious of them are those which the Phoenicians discovered at the time
when they went with Thasos and colonized the island, which took its name
from him. These Phoenician workings are in Thasos itself, between
Coenyra and a place called Aenyra over against Samothrace; a high
mountain has been turned upside down in the search for ores."
(Rawlinson's Trans.). The occasion of this statement of Herodotus was
the relations of the Thasians with Darius (521-486 B.C.). The date of
the Phoenician colonization of Thasos is highly nebular--anywhere from
1200 to 900 B.C.

[30] Agricola, _De Veteribus et Novis Metallis_, Book I., p. 392,
says:--"Conrad, whose nickname in former years was 'pauper,' suddenly
became rich from the silver mines of Mount Jura, known as the
_Firstum_." He was ennobled with the title of Graf Cuntz von Glueck by
the Emperor Maximilian (who was Emperor of the Holy Roman Empire,
1493-1519). Conrad was originally a working miner at Schneeberg where he
was known as Armer Cuntz (poor Cuntz or Conrad) and grew wealthy from
the mines of Fuerst in Leberthal. This district is located in the Vosges
Mountains on the borders of Lorraine and Upper Alsace. The story of
Cuntz or Conrad von Glueck is mentioned by Albinus (_Meissnische Land und
Berg Chronica_, Dresden, 1589, p. 116), Mathesius (_Sarepta_, Nuremberg,
1578, fol. XVI.), and by others.

[31] Vladislaus III. was King of Poland, 1434-44, and also became King
of Hungary in 1440. Tursius seems to be a Latinized name and cannot be
identified.




BOOK II.


Qualities which the perfect miner should possess and the arguments which
are urged for and against the arts of mining and metallurgy, as well as
the people occupied in the industry, I have sufficiently discussed in
the first Book. Now I have determined to give more ample information
concerning the miners.

In the first place, it is indispensable that they should worship God
with reverence, and that they understand the matters of which I am going
to speak, and that they take good care that each individual performs his
duties efficiently and diligently. It is decreed by Divine Providence
that those who know what they ought to do and then take care to do it
properly, for the most part meet with good fortune in all they
undertake; on the other hand, misfortune overtakes the indolent and
those who are careless in their work. No person indeed can, without
great and sustained effort and labour, store in his mind the knowledge
of every portion of the metallic arts which are involved in operating
mines. If a man has the means of paying the necessary expense, he hires
as many men as he needs, and sends them to the various works. Thus
formerly Sosias, the Thracian, sent into the silver mines a thousand
slaves whom he had hired from the Athenian Nicias, the son of
Niceratus[1]. But if a man cannot afford the expenditure he chooses of
the various kinds of mining that work which he himself can most easily
and efficiently do. Of these kinds, the two most important are the
making prospect trenches and the washing of the sands of rivers, for out
of these sands are often collected gold dust, or certain black stones
from which tin is smelted, or even gems are sometimes found in them; the
trenching occasionally lays bare at the grass-roots veins which are
found rich in metals. If therefore by skill or by luck, such sands or
veins shall fall into his hands, he will be able to establish his
fortune without expenditure, and from poverty rise to wealth. If on the
contrary, his hopes are not realized, then he can desist from washing or
digging.

When anyone, in an endeavour to increase his fortune, meets the
expenditure of a mine alone, it is of great importance that he should
attend to his works and personally superintend everything that he has
ordered to be done. For this reason, he should either have his dwelling
at the mine, where he may always be in sight of the workmen and always
take care that none neglect their duties, or else he should live in the
neighbourhood, so that he may frequently inspect his mining works. Then
he may send word by a messenger to the workmen that he is coming more
frequently than he really intends to come, and so either by his arrival
or by the intimation of it, he so frightens the workmen that none of
them perform their duties otherwise than diligently. When he inspects
the mines he should praise the diligent workmen and occasionally give
them rewards, that they and the others may become more zealous in their
duties; on the other hand, he should rebuke the idle and discharge some
of them from the mines and substitute industrious men in their places.
Indeed, the owner should frequently remain for days and nights in the
mine, which, in truth, is no habitation for the idle and luxurious; it
is important that the owner who is diligent in increasing his wealth,
should frequently himself descend into the mine, and devote some time to
the study of the nature of the veins and stringers, and should observe
and consider all the methods of working, both inside and outside the
mine. Nor is this all he ought to do, for sometimes he should undertake
actual labour, not thereby demeaning himself, but in order to encourage
his workmen by his own diligence, and to teach them their art; for that
mine is well conducted in which not only the foreman, but also the owner
himself, gives instruction as to what ought to be done. A certain
barbarian, according to Xenophon, rightly remarked to the King of Persia
that "the eye of the master feeds the horse,"[2] for the master's
watchfulness in all things is of the utmost importance.

When several share together the expenditure on a mine, it is convenient
and useful to elect from amongst their own number a mine captain, and
also a foreman. For, since men often look after their own interests but
neglect those of others, they cannot in this case take care of their own
without at the same time looking after the interests of the others,
neither can they neglect the interests of the others without neglecting
their own. But if no man amongst them be willing or able to undertake
and sustain the burdens of these offices, it will be to the common
interest to place them in the hands of most diligent men. Formerly
indeed, these things were looked after by the mining prefect[3], because
the owners were kings, as Priam, who owned the gold mines round Abydos,
or as Midas, who was the owner of those situated in Mount Bermius, or as
Gyges, or as Alyattes, or as Croesus, who was the owner of those mines
near a deserted town between Atarnea and Pergamum[4]; sometimes the
mines belonged to a Republic, as, for instance, the prosperous silver
mines in Spain which belonged to Carthage[5]; sometimes they were the
property of great and illustrious families, as were the Athenian mines
in Mount Laurion[6].

When a man owns mines but is ignorant of the art of mining, then it is
advisable that he should share in common with others the expenses, not
of one only, but of several mines. When one man alone meets the expense
for a long time of a whole mine, if good fortune bestows on him a vein
abundant in metals, or in other products, he becomes very wealthy; if,
on the contrary, the mine is poor and barren, in time he will lose
everything which he has expended on it. But the man who, in common with
others, has laid out his money on several mines in a region renowned for
its wealth of metals, rarely spends it in vain, for fortune usually
responds to his hopes in part. For when out of twelve veins in which he
has a joint interest one yields an abundance of metals, it not only
gives back to the owner the money he has spent, but also gives a profit
besides; certainly there will be for him rich and profitable mining, if
of the whole number, three, or four, or more veins should yield metal.
Very similar to this is the advice which Xenophon gave to the Athenians
when they wished to prospect for new veins of silver without suffering
loss. "There are," he said, "ten tribes of Athenians; if, therefore, the
State assigned an equal number of slaves to each tribe, and the tribes
participated equally in all the new veins, undoubtedly by this method,
if a rich vein of silver were found by one tribe, whatever profit were
made from it would assuredly be shared by the whole number. And if two,
three, or four tribes, or even half the whole number find veins, their
works would then become more profitable; and it is not probable that the
work of all the tribes will be disappointing."[7] Although this advice
of Xenophon is full of prudence, there is no opportunity for it except
in free and wealthy States; for those people who are under the authority
of kings and princes, or are kept in subjection by tyranny, do not dare,
without permission, to incur such expenditure; those who are endowed
with little wealth and resources cannot do so on account of insufficient
funds. Moreover, amongst our race it is not customary for Republics to
have slaves whom they can hire out for the benefit of the people[8];
but, instead, nowadays those who are in authority administer the funds
for mining in the name of the State, not unlike private individuals.

Some owners prefer to buy shares[9] in mines abounding in metals,
rather than to be troubled themselves to search for the veins; these men
employ an easier and less uncertain method of increasing their property.
Although their hopes in the shares of one or another mine may be
frustrated, the buyers of shares should not abandon the rest of the
mines, for all the money expended will be recovered with interest from
some other mine. They should not buy only high priced shares in those
mines producing metals, nor should they buy too many in neighbouring
mines where metal has not yet been found, lest, should fortune not
respond, they may be exhausted by their losses and have nothing with
which they may meet their expenses or buy other shares which may replace
their losses. This calamity overtakes those who wish to grow suddenly
rich from mines, and instead, they become very much poorer than before.
So then, in the buying of shares, as in other matters, there should be a
certain limit of expenditure which miners should set themselves, lest
blinded by the desire for excessive wealth, they throw all their money
away. Moreover, a prudent owner, before he buys shares, ought to go to
the mine and carefully examine the nature of the vein, for it is very
important that he should be on his guard lest fraudulent sellers of
shares should deceive him. Investors in shares may perhaps become less
wealthy, but they are more certain of some gain than those who mine for
metals at their own expense, as they are more cautious in trusting to
fortune. Neither ought miners to be altogether distrustful of fortune,
as we see some are, who as soon as the shares of any mine begin to go up
in value, sell them, on which account they seldom obtain even moderate
wealth. There are some people who wash over the dumps from exhausted and
abandoned mines, and those dumps which are derived from the drains of
tunnels; and others who smelt the old slags; from all of which they make
an ample return.

Now a miner, before he begins to mine the veins, must consider seven
things, namely:--the situation, the conditions, the water, the roads,
the climate, the right of ownership, and the neighbours. There are four
kinds of situations--mountain, hill, valley, and plain. Of these four,
the first two are the most easily mined, because in them tunnels can be
driven to drain off the water, which often makes mining operations very
laborious, if it does not stop them altogether. The last two kinds of
ground are more troublesome, especially because tunnels cannot be driven
in such places. Nevertheless, a prudent miner considers all these four
sorts of localities in the region in which he happens to be, and he
searches for veins in those places where some torrent or other agency
has removed and swept the soil away; yet he need not prospect
everywhere, but since there is a great variety, both in mountains and in
the three other kinds of localities, he always selects from them those
which will give him the best chance of obtaining wealth.

In the first place, mountains differ greatly in position, some being
situated in even and level plains, while others are found in broken and
elevated regions, and others again seem to be piled up, one mountain
upon another. The wise miner does not mine in mountains which are
situated on open plains, neither does he dig in those which are placed
on the summits of mountainous regions, unless by some chance the veins
in those mountains have been denuded of their surface covering, and
abounding in metals and other products, are exposed plainly to his
notice,--for with regard to what I have already said more than once, and
though I never repeat it again, I wish to emphasize this exception as to
the localities which should not be selected. All districts do not
possess a great number of mountains crowded together; some have but one,
others two, others three, or perhaps a few more. In some places there
are plains lying between them; in others the mountains are joined
together or separated only by narrow valleys. The miner should not dig
in those solitary mountains, dispersed through the plains and open
regions, but only in those which are connected and joined with others.
Then again, since mountains differ in size, some being very large,
others of medium height, and others more like hills than mountains, the
miner rarely digs in the largest or the smallest of them, but generally
only in those of medium size. Moreover, mountains have a great variety
of shapes; for with some the slopes rise gradually, while others, on the
contrary, are all precipitous; in some others the slopes are gradual on
one side, and on the other sides precipitous; some are drawn out in
length; some are gently curved; others assume different shapes. But the
miner may dig in all parts of them, except where there are precipices,
and he should not neglect even these latter if metallic veins are
exposed before his eyes. There are just as great differences in hills as
there are in mountains, yet the miner does not dig except in those
situated in mountainous districts, and even very rarely in those. It is
however very little to be wondered at that the hill in the Island of
Lemnos was excavated, for the whole is of a reddish-yellow colour, which
furnishes for the inhabitants that valuable clay so especially
beneficial to mankind[10]. In like manner, other hills are excavated if
chalk or other varieties of earth are exposed, but these are not
prospected for.

There are likewise many varieties of valleys and plains. One kind is
enclosed on the sides with its outlet and entrance open; another has
either its entrance or its outlet open and the rest of it is closed in;
both of these are properly called valleys. There is a third variety
which is surrounded on all sides by mountains, and these are called
_convalles_. Some valleys again, have recesses, and others have none;
one is wide, another narrow; one is long, another short; yet another
kind is not higher than the neighbouring plain, and others are lower
than the surrounding flat country. But the miner does not dig in those
surrounded on all sides by mountains, nor in those that are open, unless
there be a low plain close at hand, or unless a vein of metal descending
from the mountains should extend into the valley. Plains differ from one
another, one being situated at low elevation, and others higher, one
being level and another with a slight incline. The miner should never
excavate the low-lying plain, nor one which is perfectly level, unless
it be in some mountain, and rarely should he mine in the other kinds of
plains.

With regard to the conditions of the locality the miner should not
contemplate mining without considering whether the place be covered with
trees or is bare. If it be a wooded place, he who digs there has this
advantage, besides others, that there will be an abundant supply of wood
for his underground timbering, his machinery, buildings, smelting, and
other necessities. If there is no forest he should not mine there unless
there is a river near, by which he can carry down the timber. Yet
wherever there is a hope that pure gold or gems may be found, the ground
can be turned up, even though there is no forest, because the gems need
only to be polished and the gold to be purified. Therefore the
inhabitants of hot regions obtain these substances from rough and sandy
places, where sometimes there are not even shrubs, much less woods.

The miner should next consider the locality, as to whether it has a
perpetual supply of running water, or whether it is always devoid of
water except when a torrent supplied by rains flows down from the
summits of the mountains. The place that Nature has provided with a
river or stream can be made serviceable for many things; for water will
never be wanting and can be carried through wooden pipes to baths in
dwelling-houses; it may be carried to the works, where the metals are
smelted; and finally, if the conditions of the place will allow it, the
water can be diverted into the tunnels, so that it may turn the
underground machinery. Yet on the other hand, to convey a constant
supply of water by artificial means to mines where Nature has denied it
access, or to convey the ore to the stream, increases the expense
greatly, in proportion to the distance the mines are away from the
river.

The miner also should consider whether the roads from the neighbouring
regions to the mines are good or bad, short or long. For since a region
which is abundant in mining products very often yields no agricultural
produce, and the necessaries of life for the workmen and others must all
be imported, a bad and long road occasions much loss and trouble with
porters and carriers, and this increases the cost of goods brought in,
which, therefore, must be sold at high prices. This injures not so much
the workmen as the masters; since on account of the high price of goods,
the workmen are not content with the wages customary for their labour,
nor can they be, and they ask higher pay from the owners. And if the
owners refuse, the men will not work any longer in the mines but will go
elsewhere. Although districts which yield metals and other mineral
products are generally healthy, because, being often situated on high
and lofty ground, they are fanned by every wind, yet sometimes they are
unhealthy, as has been related in my other book, which is called "_De
Natura Eorum Quae Effluunt ex Terra_." Therefore, a wise miner does not
mine in such places, even if they are very productive, when he perceives
unmistakable signs of pestilence. For if a man mines in an unhealthy
region he may be alive one hour and dead the next.

Then, the miner should make careful and thorough investigation
concerning the lord of the locality, whether he be a just and good man
or a tyrant, for the latter oppresses men by force of his authority, and
seizes their possessions for himself; but the former governs justly and
lawfully and serves the common good. The miner should not start mining
operations in a district which is oppressed by a tyrant, but should
carefully consider if in the vicinity there is any other locality
suitable for mining and make up his mind if the overlord there be
friendly or inimical. If he be inimical the mine will be rendered unsafe
through hostile attacks, in one of which all of the gold or silver, or
other mineral products, laboriously collected with much cost, will be
taken away from the owner and his workmen will be struck with terror;
overcome by fear, they will hastily fly, to free themselves from the
danger to which they are exposed. In this case, not only are the
fortunes of the miner in the greatest peril but his very life is in
jeopardy, for which reason he should not mine in such places.

Since several miners usually come to mine the veins in one locality, a
settlement generally springs up, for the miner who began first cannot
keep it exclusively for himself. The _Bergmeister_ gives permits to some
to mine the superior and some the inferior parts of the veins; to some
he gives the cross veins, to others the inclined veins. If the man who
first starts work finds the vein to be metal-bearing or yielding other
mining products, it will not be to his advantage to cease work because
the neighbourhood may be evil, but he will guard and defend his rights
both by arms and by the law. When the _Bergmeister_[11] delimits the
boundaries of each owner, it is the duty of a good miner to keep within
his bounds, and of a prudent one to repel encroachments of his
neighbours by the help of the law. But this is enough about the
neighbourhood.

The miner should try to obtain a mine, to which access is not difficult,
in a mountainous region, gently sloping, wooded, healthy, safe, and not
far distant from a river or stream by means of which he may convey his
mining products to be washed and smelted. This indeed, is the best
position. As for the others, the nearer they approximate to this
position the better they are; the further removed, the worse.

Now I will discuss that kind of minerals for which it is not necessary
to dig, because the force of water carries them out of the veins. Of
these there are two kinds, minerals--and their fragments[12]--and
juices. When there are springs at the outcrop of the veins from which,
as I have already said, the above-mentioned products are emitted, the
miner should consider these first, to see whether there are metals or
gems mixed with the sand, or whether the waters discharged are filled
with juices. In case metals or gems have settled in the pool of the
spring, not only should the sand from it be washed, but also that from
the streams which flow from these springs, and even from the river
itself into which they again discharge. If the springs discharge water
containing some juice, this also should be collected; the further such a
stream has flowed from the source, the more it receives plain water and
the more diluted does it become, and so much the more deficient in
strength. If the stream receives no water of another kind, or scarcely
any, not only the rivers, but likewise the lakes which receive these
waters, are of the same nature as the springs, and serve the same uses;
of this kind is the lake which the Hebrews call the Dead Sea, and which
is quite full of bituminous fluids[13]. But I must return to the subject
of the sands.

Springs may discharge their waters into a sea, a lake, a marsh, a river,
or a stream; but the sand of the sea-shore is rarely washed, for
although the water flowing down from the springs into the sea carries
some metals or gems with it, yet these substances can scarcely ever be
reclaimed, because they are dispersed through the immense body of waters
and mixed up with other sand, and scattered far and wide in different
directions, or they sink down into the depths of the sea. For the same
reasons, the sands of lakes can very rarely be washed successfully, even
though the streams rising from the mountains pour their whole volume of
water into them. The particles of metals and gems from the springs are
very rarely carried into the marshes, which are generally in level and
open places. Therefore, the miner, in the first place, washes the sand
of the spring, then of the stream which flows from it, then finally,
that of the river into which the stream discharges. It is not worth the
trouble to wash the sands of a large river which is on a level plain at
a distance from the mountains. Where several springs carrying metals
discharge their waters into one river, there is more hope of productive
results from washing. The miner does not neglect even the sands of the
streams in which excavated ores have been washed.

The waters of springs taste according to the juice they contain, and
they differ greatly in this respect. There are six kinds of these tastes
which the worker[14] especially observes and examines; there is the
salty kind, which shows that salt may be obtained by evaporation; the
nitrous, which indicates soda; the aluminous kind, which indicates alum;
the vitrioline, which indicates vitriol; the sulphurous kind, which
indicates sulphur; and as for the bituminous juice, out of which bitumen
is melted down, the colour itself proclaims it to the worker who is
evaporating it. The sea-water however, is similar to that of salt
springs, and may be drawn into low-lying pits, and, evaporated by the
heat of the sun, changes of itself into salt; similarly the water of
some salt-lakes turns to salt when dried by the heat of summer.
Therefore an industrious and diligent man observes and makes use of
these things and thus contributes something to the common welfare.

The strength of the sea condenses the liquid bitumen which flows into it
from hidden springs, into amber and jet, as I have described already in
my books "_De Subterraneorum Ortu et Causis_"[15]. The sea, with certain
directions of the wind, throws both these substances on shore, and for
this reason the search for amber demands as much care as does that for
coral.

Moreover, it is necessary that those who wash the sand or evaporate the
water from the springs, should be careful to learn the nature of the
locality, its roads, its salubrity, its overlord, and the neighbours,
lest on account of difficulties in the conduct of their business they
become either impoverished by exhaustive expenditure, or their goods and
lives are imperilled. But enough about this.

The miner, after he has selected out of many places one particular spot
adapted by Nature for mining, bestows much labour and attention on the
veins. These have either been stripped bare of their covering by chance
and thus lie exposed to our view, or lying deeply hidden and concealed
they are found after close search; the latter is more usual, the former
more rarely happens, and both of these occurrences must be explained.
There is more than one force which can lay bare the veins unaided by the
industry or toil of man; since either a torrent might strip off the
surface, which happened in the case of the silver mines of Freiberg
(concerning which I have written in Book I. of my work "_De Veteribus
et Novis Metallis_")[16]; or they may be exposed through the force of
the wind, when it uproots and destroys the trees which have grown over
the veins; or by the breaking away of the rocks; or by long-continued
heavy rains tearing away the mountain; or by an earthquake; or by a
lightning flash; or by a snowslide; or by the violence of the winds: "Of
such a nature are the rocks hurled down from the mountains by the force
of the winds aided by the ravages of time." Or the plough may uncover
the veins, for Justin relates in his history that nuggets of gold had
been turned up in Galicia by the plough; or this may occur through a
fire in the forest, as Diodorus Siculus tells us happened in the silver
mines in Spain; and that saying of Posidonius is appropriate enough:
"The earth violently moved by the fires consuming the forest sends forth
new products, namely, gold and silver."[17] And indeed, Lucretius has
explained the same thing more fully in the following lines: "Copper and
gold and iron were discovered, and at the same time weighty silver and
the substance of lead, when fire had burned up vast forests on the great
hills, either by a discharge of heaven's lightning, or else because,
when men were waging war with one another, forest fires had carried fire
among the enemy in order to strike terror to them, or because, attracted
by the goodness of the soil, they wished to clear rich fields and bring
the country into pasture, or else to destroy wild beasts and enrich
themselves with the game; for hunting with pitfalls and with fire came
into use before the practice of enclosing the wood with toils and
rousing the game with dogs. Whatever the fact is, from whatever cause
the heat of flame had swallowed up the forests with a frightful
crackling from their very roots, and had thoroughly baked the earth with
fire, there would run from the boiling veins and collect into the
hollows of the grounds a stream of silver and gold, as well as of copper
and lead."[18] But yet the poet considers that the veins are not laid
bare in the first instance so much by this kind of fire, but rather that
all mining had its origin in this. And lastly, some other force may by
chance disclose the veins, for a horse, if this tale can be believed,
disclosed the lead veins at Goslar by a blow from his hoof[19]. By such
methods as these does fortune disclose the veins to us.

But by skill we can also investigate hidden and concealed veins, by
observing in the first place the bubbling waters of springs, which
cannot be very far distant from the veins because the source of the
water is from them; secondly, by examining the fragments of the veins
which the torrents break off from the earth, for after a long time some
of these fragments are again buried in the ground. Fragments of this
kind lying about on the ground, if they are rubbed smooth, are a long
distance from the veins, because the torrent, which broke them from the
vein, polished them while it rolled them a long distance; but if they
are fixed in the ground, or if they are rough, they are nearer to the
veins. The soil also should be considered, for this is often the cause
of veins being buried more or less deeply under the earth; in this case
the fragments protrude more or less widely apart, and miners are wont to
call the veins discovered in this manner "_fragmenta_."[20]

Further, we search for the veins by observing the hoar-frosts, which
whiten all herbage except that growing over the veins, because the veins
emit a warm and dry exhalation which hinders the freezing of the
moisture, for which reason such plants appear rather wet than whitened
by the frost. This may be observed in all cold places before the grass
has grown to its full size, as in the months of April and May; or when
the late crop of hay, which is called the _cordum_, is cut with scythes
in the month of September. Therefore in places where the grass has a
dampness that is not congealed into frost, there is a vein beneath; also
if the exhalation be excessively hot, the soil will produce only small
and pale-coloured plants. Lastly, there are trees whose foliage in
spring-time has a bluish or leaden tint, the upper branches more
especially being tinged with black or with any other unnatural colour,
the trunks cleft in two, and the branches black or discoloured. These
phenomena are caused by the intensely hot and dry exhalations which do
not spare even the roots, but scorching them, render the trees sickly;
wherefore the wind will more frequently uproot trees of this kind than
any others. Verily the veins do emit this exhalation. Therefore, in a
place where there is a multitude of trees, if a long row of them at an
unusual time lose their verdure and become black or discoloured, and
frequently fall by the violence of the wind, beneath this spot there is
a vein. Likewise along a course where a vein extends, there grows a
certain herb or fungus which is absent from the adjacent space, or
sometimes even from the neighbourhood of the veins. By these signs of
Nature a vein can be discovered.

There are many great contentions between miners concerning the forked
twig[21], for some say that it is of the greatest use in discovering
veins, and others deny it. Some of those who manipulate and use the
twig, first cut a fork from a hazel bush with a knife, for this bush
they consider more efficacious than any other for revealing the veins,
especially if the hazel bush grows above a vein. Others use a different
kind of twig for each metal, when they are seeking to discover the
veins, for they employ hazel twigs for veins of silver; ash twigs for
copper; pitch pine for lead and especially tin, and rods made of iron
and steel for gold. All alike grasp the forks of the twig with their
hands, clenching their fists, it being necessary that the clenched
fingers should be held toward the sky in order that the twig should be
raised at that end where the two branches meet. Then they wander hither
and thither at random through mountainous regions. It is said that the
moment they place their feet on a vein the twig immediately turns and
twists, and so by its action discloses the vein; when they move their
feet again and go away from that spot the twig becomes once more
immobile.

The truth is, they assert, the movement of the twig is caused by the
power of the veins, and sometimes this is so great that the branches of
trees growing near a vein are deflected toward it. On the other hand,
those who say that the twig is of no use to good and serious men, also
deny that the motion is due to the power of the veins, because the twigs
will not move for everybody, but only for those who employ incantations
and craft. Moreover, they deny the power of a vein to draw to itself the
branches of trees, but they say that the warm and dry exhalations cause
these contortions. Those who advocate the use of the twig make this
reply to these objections: when one of the miners or some other person
holds the twig in his hands, and it is not turned by the force of a
vein, this is due to some peculiarity of the individual, which hinders
and impedes the power of the vein, for since the power of the vein in
turning and twisting the twig may be not unlike that of a magnet
attracting and drawing iron toward itself, this hidden quality of a man
weakens and breaks the force, just the same as garlic weakens and
overcomes the strength of a magnet. For a magnet smeared with garlic
juice cannot attract iron; nor does it attract the latter when rusty.
Further, concerning the handling of the twig, they warn us that we
should not press the fingers together too lightly, nor clench them too
firmly, for if the twig is held lightly they say that it will fall
before the force of the vein can turn it; if however, it is grasped too
firmly the force of the hands resists the force of the veins and
counteracts it. Therefore, they consider that five things are necessary
to insure that the twig shall serve its purpose: of these the first is
the size of the twig, for the force of the veins cannot turn too large a
stick; secondly, there is the shape of the twig, which must be forked or
the vein cannot turn it; thirdly, the power of the vein which has the
nature to turn it; fourthly, the manipulation of the twig; fifthly, the
absence of impeding peculiarities. These advocates of the twig sum up
their conclusions as follows: if the rod does not move for everybody, it
is due to unskilled manipulation or to the impeding peculiarities of the
man which oppose and resist the force of the veins, as we said above,
and those who search for veins by means of the twig need not necessarily
make incantations, but it is sufficient that they handle it suitably and
are devoid of impeding power; therefore, the twig may be of use to good
and serious men in discovering veins. With regard to deflection of
branches of trees they say nothing and adhere to their opinion.

[Illustration 40 (Divining Rod): A--Twig. B--Trench.]

Since this matter remains in dispute and causes much dissention amongst
miners, I consider it ought to be examined on its own merits. The
wizards, who also make use of rings, mirrors and crystals, seek for
veins with a divining rod shaped like a fork; but its shape makes no
difference in the matter,--it might be straight or of some other
form--for it is not the form of the twig that matters, but the wizard's
incantations which it would not become me to repeat, neither do I wish
to do so. The Ancients, by means of the divining rod, not only procured
those things necessary for a livelihood or for luxury, but they were
also able to alter the forms of things by it; as when the magicians
changed the rods of the Egyptians into serpents, as the writings of the
Hebrews relate[22]; and as in Homer, Minerva with a divining rod turned
the aged Ulysses suddenly into a youth, and then restored him back again
to old age; Circe also changed Ulysses' companions into beasts, but
afterward gave them back again their human form[23]; moreover by his
rod, which was called "Caduceus," Mercury gave sleep to watchmen and
awoke slumberers[24]. Therefore it seems that the divining rod passed to
the mines from its impure origin with the magicians. Then when good men
shrank with horror from the incantations and rejected them, the twig was
retained by the unsophisticated common miners, and in searching for new
veins some traces of these ancient usages remain.

But since truly the twigs of the miners do move, albeit they do not
generally use incantations, some say this movement is caused by the
power of the veins, others say that it depends on the manipulation, and
still others think that the movement is due to both these causes. But,
in truth, all those objects which are endowed with the power of
attraction do not twist things in circles, but attract them directly to
themselves; for instance, the magnet does not turn the iron, but draws
it directly to itself, and amber rubbed until it is warm does not bend
straws about, but simply draws them to itself. If the power of the veins
were of a similar nature to that of the magnet and the amber, the twig
would not so much twist as move once only, in a semi-circle, and be
drawn directly to the vein, and unless the strength of the man who holds
the twig were to resist and oppose the force of the vein, the twig would
be brought to the ground; wherefore, since this is not the case, it must
necessarily follow that the manipulation is the cause of the twig's
twisting motion. It is a conspicuous fact that these cunning
manipulators do not use a straight twig, but a forked one cut from a
hazel bush, or from some other wood equally flexible, so that if it be
held in the hands, as they are accustomed to hold it, it turns in a
circle for any man wherever he stands. Nor is it strange that the twig
does not turn when held by the inexperienced, because they either grasp
the forks of the twig too tightly or hold them too loosely.
Nevertheless, these things give rise to the faith among common miners
that veins are discovered by the use of twigs, because whilst using
these they do accidentally discover some; but it more often happens that
they lose their labour, and although they might discover a vein, they
become none the less exhausted in digging useless trenches than do the
miners who prospect in an unfortunate locality. Therefore a miner, since
we think he ought to be a good and serious man, should not make use of
an enchanted twig, because if he is prudent and skilled in the natural
signs, he understands that a forked stick is of no use to him, for as I
have said before, there are the natural indications of the veins which
he can see for himself without the help of twigs. So if Nature or chance
should indicate a locality suitable for mining, the miner should dig his
trenches there; if no vein appears he must dig numerous trenches until
he discovers an outcrop of a vein.

A _vena dilatata_ is rarely discovered by men's labour, but usually some
force or other reveals it, or sometimes it is discovered by a shaft or a
tunnel on a _vena profunda_[25].

The veins after they have been discovered, and likewise the shafts and
tunnels, have names given them, either from their discoverers, as in the
case at Annaberg of the vein called "Koelergang," because a charcoal
burner discovered it; or from their owners, as the Geyer, in
Joachimsthal, because part of the same belonged to Geyer; or from their
products, as the "Pleygang" from lead, or the "Bissmutisch" at
Schneeberg from bismuth[26]; or from some other circumstances, such as
the rich alluvials from the torrent by which they were laid bare in the
valley of Joachim. More often the first discoverers give the names
either of persons, as those of German Kaiser, Apollo, Janus; or the name
of an animal, as that of lion, bear, ram, or cow; or of things
inanimate, as "silver chest" or "ox stalls"; or of something ridiculous,
as "glutton's nightshade"; or finally, for the sake of a good omen, they
call it after the Deity. In ancient times they followed the same custom
and gave names to the veins, shafts and tunnels, as we read in Pliny:
"It is wonderful that the shafts begun by Hannibal in Spain are still
worked, their names being derived from their discoverers. One of these
at the present day, called Baebelo, furnished Hannibal with three
hundred pounds weight (of silver) per day."[27]

     END OF BOOK II.


FOOTNOTES:

[1] Xenophon. Essay on the Revenues of Athens, IV., 14.

"But we cannot but feel surprised that the State, when it sees many
private individuals enriching themselves from its resources, does not
imitate their proceedings; for we heard long ago, indeed, at least such
of us as attended to these matters, that Nicias the son of Niceratus
kept a thousand men employed in the silver mines, whom he let on hire to
Sosias of Thrace on condition that he should give him for each an obolus
a day, free of all charges; and this number he always supplied
undiminished." (See also Note 6). An obolus a day each, would be about
23 oz. Troy of silver per day for the whole number. In modern value this
would, of course, be but about 50s. per day, but in purchasing power the
value would probably be 100 to 1 (see Note on p. 28). Nicias was
estimated to have a fortune of 100 talents--about 83,700 Troy ounces of
silver, and was one of the wealthiest of the Athenians. (Plutarch, Life
of Nicias).

[2] Xenophon. _Oeconomicus_ XII., 20. "'I approve,' said Ischomachus,
'of the barbarian's answer to the King who found a good horse, and,
wishing to fatten it as soon as possible, asked a man with a good
reputation for horsemanship what would do it?' The man's reply was: 'Its
master's eye.'"

[3] _Praefectus Metallorum._ In Saxony this official was styled the
_Berghauptmann_. For further information see page 94 and note on page
78.

[4] This statement is either based upon Apollodorus, whom Agricola does
not mention among his authorities, or on Strabo, whom he does so
include. The former in his work on Mythology makes such a statement, for
which Strabo (XIV., 5, 28) takes him to task as follows: "With this vain
intention they collected the stories related by the Scepsian
(Demetrius), and taken from Callisthenes and other writers, who did not
clear them from false notions respecting the Halizones; for example,
that the wealth of Tantalus and of the Pelopidae was derived, it is
said, from the mines about Phrygia and Sipylus; that of Cadmus from the
mines of Thrace and Mount Pangaeum; that of Priam from the gold mines of
Astyra, near Abydos (of which at present there are small remains, yet
there is a large quantity of matter ejected, and the excavations are
proofs of former workings); that of Midas from the mines about Mount
Bermium; that of Gyges, Alyattes, and Croesus, from the mines in Lydia
and the small deserted city between Atarneus and Pergamum, where are the
sites of exhausted mines." (Hamilton's Trans., Vol. III., p. 66).

In adopting this view, Agricola apparently applied a wonderful realism
to some Greek mythology--for instance, in the legend of Midas, which
tells of that king being rewarded by the god Dionysus, who granted his
request that all he touched might turn to gold; but the inconvenience of
the gift drove him to pray for relief, which he obtained by bathing in
the Pactolus, the sands of which thereupon became highly auriferous.
Priam was, of course, King of Troy, but Homer does not exhibit him as a
mine-owner. Gyges, Alyattes, and Croesus were successively Kings of
Lydia, from 687 to 546 B.C., and were no doubt possessed of great
treasure in gold. Some few years ago we had occasion to inquire into
extensive old workings locally reputed to be Croesus' mines, at a place
some distance north of Smyrna, which would correspond very closely to
the locality here mentioned.

[5] There can be no doubt that the Carthaginians worked the mines of
Spain on an extensive scale for a very long period anterior to their
conquest by the Romans, but whether the mines were worked by the
Government or not we are unable to find any evidence.

[6] The silver mines of Mt. Laurion formed the economic mainstay of
Athens for the three centuries during which the State had the ascendency
in Greece, and there can be no doubt that the dominance of Athens and
its position as a sea-power were directly due to the revenues from the
mines. The first working of the mines is shrouded in mystery. The
scarcity of silver in the time of Solon (638-598 B.C.) would not
indicate any very considerable output at that time. According to
Xenophon (Essay on Revenue of Athens, IV., 2), written about 355 B.C.,
"they were wrought in very ancient times." The first definite discussion
of the mines in Greek record begins about 500 B.C., for about that time
the royalties began to figure in the Athenian Budget (Aristotle,
Constitution of Athens, 47). There can be no doubt that the mines
reached great prosperity prior to the Persian invasion. In the year 484
B.C. the mines returned 100 Talents (about 83,700 oz. Troy) to the
Treasury, and this, on the advice of Themistocles, was devoted to the
construction of the fleet which conquered the Persians at Salamis (480
B.C.). The mines were much interfered with by the Spartan invasions from
431 to 425 B.C., and again by their occupation in 413 B.C.; and by 355
B.C., when Xenophon wrote the "Revenues," exploitation had fallen to a
low ebb, for which he proposes the remedies noted by Agricola on p. 28.
By the end of the 4th Century, B.C., the mines had again reached
considerable prosperity, as is evidenced by Demosthenes' orations
against Pantaenetus and against Phaenippus, and by Lycurgus' prosecution
of Diphilos for robbing the supporting pillars. The domination of the
Macedonians under Philip and Alexander at the end of the 4th and
beginning of the 3rd Centuries B.C., however, so flooded Greece with
money from the mines of Thrace, that this probably interfered with
Laurion, at this time, in any event, began the decadence of these mines.
Synchronous also was the decadence of Athens, and, but for fitful
displays, the State was not able to maintain even its own independence,
not to mention its position as a dominant State. Finally, Strabo,
writing about 30 B.C. gives the epitaph of every mining
district--reworking the dumps. He says (IX., 1, 23): "The silver mines
in Attica were at first of importance, but are now exhausted. The
workmen, when the mines yielded a bad return to their labour, committed
to the furnace the old refuse and scoria, and hence obtained very pure
silver, for the former workmen had carried on the process in the furnace
unskilfully."

Since 1860, the mines have been worked with some success by a French
Company, thus carrying the mining history of this district over a period
of twenty-seven centuries. The most excellent of many memoirs upon the
mines at Laurion, not only for its critical, historical, and
archaeological value, but also because of its author's great insight into
mining and metallurgy, is that of Edouard Ardaillon (_Les Mines du
Laurion dans l'Antiquite_, Paris, 1897). We have relied considerably
upon this careful study for the following notes, and would refer others
to it for a short bibliography on the subject. We would mention in
passing that Augustus Boeckh's "Silver Mines of Laurion," which is
incorporated with his "Public Economy of Athens" (English Translation by
Lewis, London, 1842) has been too much relied upon by English students.
It is no doubt the product of one acquainted with written history, but
without any special knowledge of the industry and it is based on no
antiquarian research. The Mt. Laurion mining district is located near
the southern end of the Attic Peninsula. The deposits are silver-lead,
and they occur along the contact between approximately horizontal
limestones and slates. There are two principal beds of each, thus
forming three principal contacts. The most metalliferous of these
contacts are those at the base of the slates, the lowest contact of the
series being the richest. The ore-bodies were most irregular, varying
greatly in size, from a thin seam between schist planes, to very large
bodies containing as much as 200,000 cubic metres. The ores are
argentiferous galena, accompanied by considerable amounts of blende and
pyrites, all oxidized near the surface. The ores worked by the Ancients
appear to have been fairly rich in lead, for the discards worked in
recent years by the French Company, and the pillars left behind, ran 8%
to 10% lead. The ratio of silver was from 40 to 90 ounces per ton of
lead. The upper contacts were exposed by erosion and could be entered by
tunnels, but the lowest and most prolific contact line was only to be
reached by shafts. The shafts were ordinarily from four to six feet
square, and were undoubtedly cut by hammer and chisel; they were as much
as 380 feet deep. In some cases long inclines for travelling roads join
the vertical shafts in depth. The drives, whether tunnels or from
shafts, were not level, but followed every caprice of the sinuous
contact. They were from two to two and a half feet wide, often driven in
parallels with cross-cuts between, in order to exploit every corner of
the contact. The stoping of ore-bodies discovered was undertaken quite
systematically, the methods depending in the main on the shape of the
ore-body. If the body was large, its dimensions were first determined by
drives, crosscuts, rises, and winzes, as the case might require. If the
ore was mainly overhead it was overhand-stoped, and the stopes filled as
work progressed, inclined winzes being occasionally driven from the
stopes to the original entry drives. If the ore was mainly below, it was
underhand-stoped, pillars being left if necessary--such pillars in some
cases being thirty feet high. They also employed timber and artificial
pillars. The mines were practically dry. There is little evidence of
breaking by fire. The ore was hand-sorted underground and carried out by
the slaves, and in some cases apparently the windlass was used. It was
treated by grinding in mills and concentrating upon a sort of buddle.
These concentrates--mostly galena--were smelted in low furnaces and the
lead was subsequently cupelled. Further details of metallurgical methods
will be found in Notes on p. 391 and p. 465, on metallurgical subjects.

The mines were worked by slaves. Even the overseers were at times
apparently slaves, for we find (Xenophon, _Memorabilia_, II., 5) that
Nicias paid a whole talent for a good overseer. A talent would be about
837 Troy ounces of silver. As wages of skilled labour were about two and
one half pennyweights of silver per diem, and a family income of 100
ounces of silver per annum was affluence, the ratio of purchasing power
of Attic coinage to modern would be about 100 to 1. Therefore this mine
manager was worth in modern value roughly L8,000. The mines were the
property of the State. The areas were defined by vertical boundaries,
and were let on lease for definite periods for a fixed annual rent. More
ample discussion of the law will be found on p. 83.

[7] Xenophon. (Essay on The Revenues, IV., 30). "I think, however, that
I am able to give some advice with regard to this difficulty also (the
risk of opening new mines), and to show how new operations may be
conducted with the greatest safety. There are ten tribes at Athens, and
if to each of these the State should assign an equal number of slaves,
and the tribes should all make new cuttings, sharing their fortunes in
common, then if but one tribe should make any useful discovery it would
point out something profitable to the whole; but if two, three, or four,
or half the number should make some discovery, it is plain that the
works would be more profitable in proportion, and that they should all
fail is contrary to all experience in past times." (Watson's Trans. p.
258).

[8] Agricola here refers to the proposal of Xenophon for the State to
collect slaves and hire them to work the mines of Laurion. There is no
evidence that this recommendation was ever carried out.

[9] _Partes._ Agricola, p. 89-91, describes in detail the organization
and management of these share companies. See Note 8, p. 90.

[10] This island in the northern AEgean Sea has produced this "earth"
from before Theophrastus' time (372-287 B.C.) down to the present day.
According to Dana (System of Mineralogy 689), it is cimolite, a hydrous
silicate of aluminium. The Ancients distinguished two kinds,--one sort
used as a pigment, and the other for medicinal purposes. This latter was
dug with great ceremony at a certain time of the year, moulded into
cubes, and stamped with a goat,--the symbol of Diana. It thus became
known as _terra sigillata_, and was an article of apothecary commerce
down to the last century. It is described by Galen (XII., 12),
Dioscorides (V., 63), and Pliny (XXXV., 14), as a remedy for ulcers and
snake bites.

[11] _Magister Metallorum_. See Note 1, p. 78, for the reasons of the
adoption of the term _Bergmeister_ and page 95 for details of his
duties.

[12] _Ramenta_. "Particles." The author uses this term indifferently for
fragments, particles of mineral, concentrates, gold dust, black tin,
etc., in all cases the result of either natural or artificial
concentration. As in technical English we have no general term for both
natural and artificial "concentrates," we have rendered it as the
context seemed to demand.

[13] A certain amount of bitumen does float ashore in the Dead Sea; the
origin of it is, however, uncertain. Strabo (XVI., 2, 42), Pliny (V., 15
and 16), and Josephus (IV., 8), all mention this fact. The lake for this
reason is often referred to by the ancient writers by the name
_Asphaltites_.

[14] _Excoctor_,--literally, "Smelter" or "Metallurgist."

[15] This reference should be to the _De Natura Fossilium_ (p. 230),
although there is a short reference to the matter in _De Ortu et Causis_
(p. 59). Agricola maintained that not only were jet and amber varieties
of bitumen, but also coal and camphor and obsidian. As jet (_gagates_)
is but a compact variety of coal, the ancient knowledge of this
substance has more interest than would otherwise attach to the gem,
especially as some materials described in this connection were no doubt
coal. The Greeks often refer to a series of substances which burned,
contained earth, and which no doubt comprised coal. Such substances are
mentioned by Aristotle (_De Mirabilibus_. 33, 41, 125), Nicander
(_Theriaca_. 37), and others, previous to the 2nd Century B.C., but the
most ample description is that of Theophrastus (23-28): "Some of the
more brittle stones there also are, which become as it were burning
coals when put into a fire, and continue so a long time; of this kind
are those about Bena, found in mines and washed down by the torrents,
for they will take fire on burning coals being thrown on them, and will
continue burning as long as anyone blows them; afterward they will
deaden, and may after that be made to burn again. They are therefore of
long continuance, but their smell is troublesome and disagreeable. That
also which is called the _spinus_, is found in mines. This stone, cut in
pieces and thrown together in a heap, exposed to the sun, burns; and
that the more, if it be moistened or sprinkled with water (a
pyritiferous shale?). But the _Lipara_ stone empties itself, as it were,
in burning, and becomes like the _pumice_, changing at once both its
colour and density; for before burning it is black, smooth, and compact.
This stone is found in the Pumices, separately in different places, as
it were, in cells, nowhere continuous to the matter of them. It is said
that in Melos the pumice is produced in this manner in some other stone,
as this is on the contrary in it; but the stone which the pumice is
found in is not at all like the _Lipara_ stone which is found in it.
Certain stones there are about Tetras, in Sicily, which is over against
Lipara, which empty themselves in the same manner in the fire. And in
the promontory called Erineas, there is a great quantity of stone like
that found about Bena, which, when burnt, emits a bituminous smell, and
leaves a matter resembling calcined earth. Those fossil substances that
are called coals, and are broken for use, are earthy; they kindle,
however, and burn like wood coals. These are found in Liguria, where
there also is amber, and in Elis, on the way to Olympia over the
mountains. These are used by smiths." (Based on Hill's Trans.).
Dioscorides and Pliny add nothing of value to this description.

Agricola (_De Nat. Fos._, p. 229-230) not only gives various localities
of jet, but also records its relation to coal. As to the latter, he
describes several occurrences, and describes the deposits as _vena
dilatata_. Coal had come into considerable use all over Europe,
particularly in England, long before Agricola's time; the oft-mentioned
charter to mine sea-coal given to the Monks of Newbottle Abbey, near
Preston, was dated 1210.

Amber was known to the Greeks by the name _electrum_, but whether the
alloy of the same name took its name from the colour of amber or _vice
versa_ is uncertain. The gum is supposed to be referred to by Homer (Od.
XV. 460), and Thales of Miletus (640-546 B.C.) is supposed to have first
described its power of attraction. It is mentioned by many other Greek
authors, AEschylus, Euripides, Aristotle, and others. The latter (_De
Mirabilibus_, 81) records of the amber islands in the Adriatic, that the
inhabitants tell the story that on these islands amber falls from poplar
trees. "This, they say, resembles gum and hardens like stone, the story
of the poets being that after Phaeton was struck by lightning his
sisters turned to poplar trees and shed tears of amber." Theophrastus
(53) says: "Amber is also a stone; it is dug out of the earth in Liguria
and has, like the before-mentioned (lodestone), a power of attraction."
Pliny (XXXVII., 11) gives a long account of both the substance,
literature, and mythology on the subject. His view of its origin was:
"Certainly amber is obtained from the islands of the Northern Ocean, and
is called by the Germans _glaesum_. For this reason the Romans, when
Germanicus Caesar commanded in those parts, called one of them
_Glaesaria_, which was known to the barbarians as _Austeravia_. Amber
originates from gum discharged by a kind of pine tree, like gum from
cherry and resin from the ordinary pine. It is liquid at first, and
issues abundantly and hardens in time by cold, or by the sea when the
rising tides carry off the fragments from the shores of those islands.
Certainly it is thrown on the coasts, and is so light that it appears to
roll in the water. Our forefathers believed that it was the juice of a
tree, for they called it _succinum_. And that it belongs to a kind of
pine tree is proved by the odour of the pine tree which it gives when
rubbed, and that it burns when ignited like a pitch pine torch." The
term amber is of Arabic origin--from _Ambar_--and this term was adopted
by the Greeks after the Christian era. Agricola uses the Latin term
_succinum_ and (_De Nat. Fos._, p. 231-5) disputes the origin from tree
gum, and contends for submarine bitumen springs.

[16] The statement in _De Veteribus et Novis Metallis_ (p. 394) is as
follows:--

"It came about by chance and accident that the silver mines were
discovered at Freiberg in Meissen. By the river Sala, which is not
unknown to Strabo, is Hala, which was once country, but is now a large
town; the site, at any rate, even from Roman times was famous and
renowned for its salt springs, for the possession of which the
Hermunduri fought with the Chatti. When people carried the salt thence
in wagons, as they now do straight through Meissen (Saxony) into
Bohemia--which is lacking in that seasoning to-day no less than
formerly--they saw galena in the wheel tracks, which had been uncovered
by the torrents. This lead ore, since it was similar to that of Goslar,
they put into their carts and carried to Goslar, for the same carriers
were accustomed to carry lead from that city. And since much more silver
was smelted from this galena than from that of Goslar, certain miners
betook themselves to that part of Meissen in which is now situated
Freiberg, a great and wealthy town; and we are told by consistent
stories and general report that they grew rich out of the mines."
Agricola places the discovery of the mines at Freiberg at about 1170.
See Note 11, p. 5.

[17] Diodorus Siculus (V., 35). "These places being covered with woods,
it is said that in ancient times these mountains were set on fire by
shepherds, and continued burning for many days, and parched the earth,
so that an abundance of silver ore was melted, and the metal flowed in
streams of pure silver like a river." Aristotle, nearly three centuries
before Diodorus, mentions this same story (_De Mirabilibus_, 87): "They
say that in Ibernia the woods were set on fire by certain shepherds, and
the earth thus heated, the country visibly flowed silver; and when some
time later there were earthquakes, and the earth burst asunder at
different places, a large amount of silver was collected." As the works
of Posidonius are lost, it is probable that Agricola was quoting from
Strabo (III., 2, 9), who says, in describing Spain: "Posidonius, in
praising the amount and excellence of the metals, cannot refrain from
his accustomed rhetoric, and becomes quite enthusiastic in exaggeration.
He tells us we are not to disbelieve the fable that formerly the forests
having been set on fire, the earth, which was loaded with silver and
gold, melted and threw up these metals to the surface, for inasmuch as
every mountain and wooded hill seemed to be heaped up with money by a
lavish fortune." (Hamilton's Trans. I., p. 220). Or he may have been
quoting from the _Deipnosophistae_ of Athenaeus (VI.), where Posidonius
is quoted: "And the mountains ... when once the woods upon them had
caught fire, spontaneously ran with liquid silver."

[18] Lucretius, _De Rerum Natura_ V. 1241.

[19] Agricola's account of this event in _De Veteribus et Novis
Metallis_ is as follows (p. 393): "Now veins are not always first
disclosed by the hand and labour of man, nor has art always demonstrated
them; sometimes they have been disclosed rather by chance or by good
fortune. I will explain briefly what has been written upon this matter
in history, what miners tell us, and what has occurred in our times.
Thus the mines at Goslar are said to have been found in the following
way. A certain noble, whose name is not recorded, tied his horse, which
was named Ramelus, to the branch of a tree which grew on the mountain.
This horse, pawing the earth with its hoofs, which were iron shod, and
thus turning it over, uncovered a hidden vein of lead, not unlike the
winged Pegasus, who in the legend of the poets opened a spring when he
beat the rock with his hoof. So just as that spring is named Hippocrene
after that horse, so our ancestors named the mountain Rammelsberg.
Whereas the perennial water spring of the poets would long ago have
dried up, the vein even to-day exists, and supplies an abundant amount
of excellent lead. That a horse can have opened a vein will seem
credible to anyone who reflects in how many ways the signs of veins are
shown by chance, all of which are explained in my work _De Re
Metallica_. Therefore, here we will believe the story, both because it
may happen that a horse may disclose a vein, and because the name of the
mountain agrees with the story." Agricola places the discovery of Goslar
in the Hartz at prior to 936. See Note 11, p. 5.

[20] _Fragmenta_. The glossary gives "_Geschube_." This term is defined
in the _Bergwerks' Lexicon_ (Chemnitz, 1743, p. 250) as the pieces of
stone, especially tin-stone, broken from the vein and washed out by the
water--the croppings.

[21] So far as we are able to discover, this is the first published
description of the divining rod as applied to minerals or water. Like
Agricola, many authors have sought to find its origin among the
Ancients. The magic rods of Moses and Homer, especially the rod with
which the former struck the rock at Horeb, the rod described by Ctesias
(died 398 B.C.) which attracted gold and silver, and the _virgula
divina_ of the Romans have all been called up for proof. It is true that
the Romans are responsible for the name _virgula divina_, "divining
rod," but this rod was used for taking auguries by casting bits of wood
(Cicero, _De Divinatione_). Despite all this, while the ancient
naturalists all give detailed directions for finding water, none mention
anything akin to the divining rod of the Middle Ages. It is also worth
noting that the Monk Theophilus in the 12th Century also gives a
detailed description of how to find water, but makes no mention of the
rod. There are two authorities sometimes cited as prior to Agricola, the
first being Basil Valentine in his "Last Will and Testament"
(XXIV-VIII.), and while there may be some reason (see Appendix) for
accepting the authenticity of the "Triumphal Chariot of Antimony" by
this author, as dating about 1500, there can be little doubt that the
"Last Will and Testament" was spurious and dated about 50 years after
Agricola. Paracelsus (_De Natura Rerum_ IX.), says: "These (divinations)
are vain and misleading, and among the first of them are divining rods,
which have deceived many miners. If they once point rightly they deceive
ten or twenty times." In his _De Origine Morborum Invisibilium_ (Book
I.) he adds that the "faith turns the rod." These works were no doubt
written prior to _De Re Metallica_--Paracelsus died in 1541--but they
were not published until some time afterward. Those interested in the
strange persistence of this superstition down to the present day--and
the files of the patent offices of the world are full of it--will find
the subject exhaustively discussed in M. E. Chevreul's "_De la Baguette
Divinatoire_," Paris, 1845; L. Figuier, "_Histoire du Merveilleux dans
les temps moderne II._", Paris, 1860; W. F. Barrett, Proceedings of the
Society of Psychical Research, part 32, 1897, and 38, 1900; R. W.
Raymond, American Inst. of Mining Engineers, 1883, p. 411. Of the
descriptions by those who believed in it there is none better than that
of William Pryce (_Mineralogia Cornubiensis_, London, 1778, pp.
113-123), who devotes much pains to a refutation of Agricola. When we
consider that a century later than Agricola such an advanced mind as
Robert Boyle (1626-1691), the founder of the Royal Society, was
convinced of the genuineness of the divining rod, one is more impressed
with the clarity of Agricola's vision. In fact, there were few indeed,
down to the 19th Century, who did not believe implicitly in the
effectiveness of this instrument, and while science has long since
abandoned it, not a year passes but some new manifestation of its hold
on the popular mind breaks out.

[22] Exodus VII., 10, 11, 12.

[23] Odyssey XVI., 172, and X., 238.

[24] Odyssey XXIV., 1, etc. The _Caduceus_ of Hermes had also the power
of turning things to gold, and it is interesting to note that in its
oldest form, as the insignia of heralds and of ambassadors, it had two
prongs.

[25] In a general way _venae profundae_ were fissure veins and _venae
dilatatae_ were sheeted deposits. For description see Book III.

[26] These mines are in the Erzgebirge. We have adopted the names given
in the German translation.

[27] The quotation from Pliny (XXXIII., 31) as a whole reads as
follows:--

"Silver is found in nearly all the provinces, but the finest of all in
Spain; where it is found in the barren lands, and in the mountains.
Wherever one vein of silver has been found, another is sure to be found
not far away. This is the case of nearly all the metals, whence it
appears that the Greeks derived _metalla_. It is wonderful that the
shafts begun by Hannibal in Spain still remain, their names being
derived from their makers. One of these at the present day called
Baebelo, furnished Hannibal with three hundred pounds' weight (of
silver) per day. This mountain is excavated for a distance of fifteen
hundred paces; and for this distance there are waterbearers lighted by
torches standing night and day baling out the water in turns, thus
making quite a river." Hannibal dates 247-183 B.C. and was therefore
dead 206 years when Pliny was born. According to a footnote in Bostock
and Riley's translation of Pliny, these workings were supposed to be in
the neighbourhood of Castulo, now Cazlona, near Linares. It was at
Castulo that Hannibal married his rich wife Himilce; and in the hills
north of Linares there are ancient silver mines still known as Los Pozos
de Anibal.




BOOK III.


Previously I have given much information concerning the miners, also I
have discussed the choice of localities for mining, for washing sands,
and for evaporating waters; further, I described the method of searching
for veins. With such matters I was occupied in the second book; now I
come to the third book, which is about veins and stringers, and the
seams in the rocks[1]. The term "vein" is sometimes used to indicate
_canales_ in the earth, but very often elsewhere by this name I have
described that which may be put in vessels[2]; I now attach a second
significance to these words, for by them I mean to designate any mineral
substances which the earth keeps hidden within her own deep receptacles.

[Illustration 45a (Vein in mountain): A, C--The mountain. B--_Vena
profunda_.]

First I will speak of the veins, which, in depth, width, and length,
differ very much one from another. Those of one variety descend from the
surface of the earth to its lowest depths, which on account of this
characteristic, I am accustomed to call "_venae profundae_."

[Illustration 45b (Vein in mountain): A, D--The mountain. B, C--_Vena
dilatata_.]

Another kind, unlike the _venae profundae_, neither ascend to the
surface of the earth nor descend, but lying under the ground, expand
over a large area; and on that account I call them "_venae dilatatae_."

[Illustration 49 (Veins in mountain): A, B, C, D--The mountain. E, F, G,
H, I, K--_Vena cumulata_.]

Another occupies a large extent of space in length and width; therefore
I usually call it "_vena cumulata_," for it is nothing else than an
accumulation of some certain kind of mineral, as I have described in the
book entitled _De Subterraneorum Ortu et Causis_. It occasionally
happens, though it is unusual and rare, that several accumulations of
this kind are found in one place, each one or more fathoms in depth and
four or five in width, and one is distant from another two, three, or
more fathoms. When the excavation of these accumulations begins, they at
first appear in the shape of a disc; then they open out wider; finally
from each of such accumulations is usually formed a "_vena cumulata_."

[Illustration 50a (Veins in mountain): A--_Vena profunda_.
B--_Intervenium_. C--Another _vena profunda_.]

[Illustration 50b (Veins in mountain): A & B--_Vena dilatatae_.
C--_Intervenium_. D & E--Other _venae dilatatae_.]

The space between two veins is called an _intervenium_; this interval
between the veins, if it is between _venae dilatatae_ is entirely hidden
underground. If, however, it lies between _venae profundae_ then the top
is plainly in sight, and the remainder is hidden.

[Illustration 53 (Veins in mountain): A--Wide _vena profunda_.
B--Narrow _vena profunda_.]

_Venae profundae_ differ greatly one from another in width, for some of
them are one fathom wide, some are two cubits, others one cubit; others
again are a foot wide, and some only half a foot; all of which our
miners call wide veins. Others on the contrary, are only a palm wide,
others three digits, or even two; these they call narrow. But in other
places where there are very wide veins, the widths of a cubit, or a
foot, or half a foot, are said to be narrow; at Cremnitz, for instance,
there is a certain vein which measures in one place fifteen fathoms in
width, in another eighteen, and in another twenty; the truth of this
statement is vouched for by the inhabitants.

[Illustration 54a (Veins in mountain): A--Thin _vena dilatata_.
B--Thick _vena dilatata_.]

_Venae dilatatae_, in truth, differ also in thickness, for some are one
fathom thick, others two, or even more; some are a cubit thick, some a
foot, some only half a foot; and all these are usually called thick
veins. Some on the other hand, are but a palm thick, some three digits,
some two, some one; these are called thin veins.

[Illustration 54b (Seams in the Rocks): A, B, C--Vein. D, E, F--Seams in
the Rock (_Commissurae Saxorum_).]

_Venae profundae_ vary in direction; for some run from east to west.

[Illustration 55a (Seams in the Rocks): A, B, C--Vein. D, E, F--_Seams in
the Rocks_.]

Others, on the other hand, run from west to east.

[Illustration 55b (Seams in the Rocks): A, B, C--Vein. D, E, F--_Seams in
the Rocks_.]

Others run from south to north.

[Illustration 56 (Seams in the Rocks): A, B, C--Vein. D, E, F--_Seams in
the Rocks_.]

Others, on the contrary, run from north to south.

The seams in the rocks indicate to us whether a vein runs from the east
or from the west. For instance, if the rock seams incline toward the
westward as they descend into the earth, the vein is said to run from
east to west; if they incline toward the east, the vein is said to run
from west to east; in a similar manner, we determine from the rock seams
whether the veins run north or south.

[Illustration 57 (Compass)]

Now miners divide each quarter of the earth into six divisions; and by
this method they apportion the earth into twenty-four directions, which
they divide into two parts of twelve each. The instrument which
indicates these directions is thus constructed. First a circle is made;
then at equal intervals on one half portion of it right through to the
other, twelve straight lines called by the Greeks [Greek: diametroi],
and in the Latin _dimetientes_, are drawn through a central point which
the Greeks call [Greek: kentron], so that the circle is thus divided
into twenty-four divisions, all being of an equal size. Then, within the
circle are inscribed three other circles, the outermost of which has
cross-lines dividing it into twenty-four equal parts; the space between
it and the next circle contains two sets of twelve numbers, inscribed on
the lines called "diameters"; while within the innermost circle it is
hollowed out to contain a magnetic needle[3]. The needle lies directly
over that one of the twelve lines called "diameters" on which the
number XII is inscribed at both ends.

When the needle which is governed by the magnet points directly from the
north to the south, the number XII at its tail, which is forked,
signifies the north, that number XII which is at its point indicates the
south. The sign VI superior indicates the east, and VI inferior the
west. Further, between each two cardinal points there are always five
others which are not so important. The first two of these directions are
called the prior directions; the last two are called the posterior, and
the fifth direction lies immediately between the former and the latter;
it is halved, and one half is attributed to one cardinal point and one
half to the other. For example, between the northern number XII and the
eastern number VI, are points numbered I, II, III, IV, V, of which I and
II are northern directions lying toward the east, IV and V are eastern
directions lying toward the north, and III is assigned, half to the
north and half to the east.

One who wishes to know the direction of the veins underground, places
over the vein the instrument just described; and the needle, as soon as
it becomes quiet, will indicate the course of the vein. That is, if the
vein proceeds from VI to VI, it either runs from east to west, or from
west to east; but whether it be the former or the latter, is clearly
shown by the seams in the rocks. If the vein proceeds along the line
which is between V and VI toward the opposite direction, it runs from
between the fifth and sixth divisions of east to the west, or from
between the fifth and sixth divisions of west to the east; and again,
whether it is the one or the other is clearly shown by the seams in the
rocks. In a similar manner we determine the other directions.

[Illustration 59 (Compass with winds)]

Now miners reckon as many points as the sailors do in reckoning up the
number of the winds. Not only is this done to-day in this country, but
it was also done by the Romans who in olden times gave the winds partly
Latin names and partly names borrowed from the Greeks. Any miner who
pleases may therefore call the directions of the veins by the names of
the winds. There are four principal winds, as there are four cardinal
points: the _Subsolanus_, which blows from the east; and its opposite
the _Favonius_, which blows from the west; the latter is called by the
Greeks [Greek: Zephyros], and the former [Greek: Apeliotes]. There is
the _Auster_, which blows from the south; and opposed to it is the
_Septentrio_, from the north; the former the Greeks called [Greek:
Notos], and the latter [Greek: Aparktias]. There are also subordinate
winds, to the number of twenty, as there are directions, for between
each two principal winds there are always five subordinate ones. Between
the _Subsolanus_ (east wind) and the _Auster_ (south wind) there is the
_Ornithiae_ or the Bird wind, which has the first place next to the
_Subsolanus_; then comes _Caecias_; then _Eurus_, which lies in the
midway of these five; next comes _Vulturnus_; and lastly, _Euronotus_,
nearest the _Auster_ (south wind). The Greeks have given these names to
all of these, with the exception of _Vulturnus_, but those who do not
distinguish the winds in so precise a manner say this is the same as the
Greeks called [Greek: Euros]. Between the _Auster_ (south wind) and the
_Favonius_ (west wind) is first _Altanus_, to the right of the _Auster_
(south wind); then _Libonotus_; then _Africus_, which is the middle one
of these five; after that comes _Subvesperus_; next _Argestes_, to the
left of _Favonius_ (west wind). All these, with the exception of
_Libonotus_ and _Argestes_, have Latin names; but _Africus_ also is
called by the Greeks [Greek: Lips]. In a similar manner, between
_Favonius_ (west wind) and _Septentrio_ (north wind), first to the right
of _Favonius_ (west wind), is the _Etesiae_; then _Circius_; then
_Caurus_, which is in the middle of these five; then _Corus_; and lastly
_Thrascias_ to the left of _Septentrio_ (north wind). To all of these,
except that of _Caurus_, the Greeks gave the names, and those who do not
distinguish the winds by so exact a plan, assert that the wind which the
Greeks called [Greek: Koros] and the Latins _Caurus_ is one and the
same. Again, between _Septentrio_ (north wind) and the _Subsolanus_
(east wind), the first to the right of _Septentrio_ (north wind) is
_Gallicus_; then _Supernas_; then _Aquilo_, which is the middle one of
these five; next comes _Boreas_; and lastly _Carbas_, to the left of
_Subsolanus_ (east wind). Here again, those who do not consider the
winds to be in so great a multitude, but say there are but twelve winds
in all, or at the most fourteen, assert that the wind called by the
Greeks [Greek: Boreas] and the Latins _Aquilo_ is one and the same. For
our purpose it is not only useful to adopt this large number of winds,
but even to double it, as the German sailors do. They always reckon that
between each two there is one in the centre taken from both. By this
method we also are able to signify the intermediate directions by means
of the names of the winds. For instance, if a vein runs from VI east to
VI west, it is said to proceed from _Subsolanus_ (east wind) to
_Favonius_ (west wind); but one which proceeds from between V and VI of
the east to between V and VI west is said to proceed out of the middle
of _Carbas_ and _Subsolanus_ to between _Argestes_ and _Favonius_; the
remaining directions, and their intermediates are similarly designated.
The miner, on account of the natural properties of a magnet, by which
the needle points to the south, must fix the instrument already
described so that east is to the left and west to the right.

[Illustration 60 (Veins in mountain): A, B--_Venae dilatatae_. C--_Seams
in the Rocks_.]

In a similar way to _venae profundae_, the _venae dilatatae_ vary in
their lateral directions, and we are able to understand from the seams
in the rocks in which direction they extend into the ground. For if
these incline toward the west in depth, the vein is said to extend from
east to west; if on the contrary, they incline toward the east, the vein
is said to go from west to east. In the same way, from the rock seams we
can determine veins running south and north, or the reverse, and
likewise to the subordinate directions and their intermediates.

[Illustration 61a (Veins in mountain): A--Straight _vena profunda_.
B--Curved _vena profunda_ [should be _vena dilatata_(?)].]

Further, as regards the question of direction of a _vena profunda_, one
runs straight from one quarter of the earth to that quarter which is
opposite, while another one runs in a curve, in which case it may happen
that a vein proceeding from the east does not turn to the quarter
opposite, which is the west, but twists itself and turns to the south or
the north.

[Illustration 61b (Veins in mountain): A--Horizontal _vena dilatata_.
B--Inclined _vena dilatata_. C--Curved _vena dilatata_.]

Similarly some _venae dilatatae_ are horizontal, some are inclined, and
some are curved.

[Illustration 62a (Veins in mountain)]

Also the veins which we call _profundae_ differ in the manner in which
they descend into the depths of the earth; for some are vertical (A),
some are inclined and sloping (B), others crooked (C).

[Illustration 62b (Veins in mountain)]

Moreover, _venae profundae_ (B) differ much among themselves regarding
the kind of locality through which they pass, for some extend along the
slopes of mountains or hills (A-C) and do not descend down the sides.

[Illustration 63a (Veins in mountain)]

Other _Venae Profundae_ (D, E, F) from the very summit of the mountain
or hill descend the slope (A) to the hollow or valley (B), and they
again ascend the slope or the side of the mountain or hill opposite (C).

[Illustration 63b (Veins in mountain)]

Other _Venae Profundae_ (C, D) descend the mountain or hill (A) and
extend out into the plain (B).

[Illustration 64a (Veins in mountain): A--Mountainous Plain. B--_Vena
profunda_.]

Some veins run straight along on the plateaux, the hills, or plains.

[Illustration 64b (Intersections of Veins): A--Principal vein.
B--Transverse vein. C--Vein cutting principal one obliquely.]

In the next place, _venae profundae_ differ not a little in the manner
in which they intersect, since one may cross through a second
transversely, or one may cross another one obliquely as if cutting it in
two.

[Illustration 65 (Intersections of Veins): A--Principal vein. B--Vein
which cuts A obliquely. C--Part carried away. D--That part which has
been carried forward.]

If a vein which cuts through another principal one obliquely be the
harder of the two, it penetrates right through it, just as a wedge of
beech or iron can be driven through soft wood by means of a tool. If it
be softer, the principal vein either drags the soft one with it for a
distance of three feet, or perhaps one, two, three, or several fathoms,
or else throws it forward along the principal vein; but this latter
happens very rarely. But that the vein which cuts the principal one is
the same vein on both sides, is shown by its having the same character
in its footwalls and hangingwalls.

[Illustration 66a (Intersections of Veins): A, B--Two veins descend
inclined and dip toward each other. C--Junction. Likewise two veins.
D--Indicates one descending vertically. E--Marks the other descending
inclined, which dips toward D. F--Their junction.]

Sometimes _venae profundae_ join one with another, and from two or more
outcropping veins[4], one is formed; or from two which do not outcrop
one is made, if they are not far distant from each other, and the one
dips into the other, or if each dips toward the other, and they thus
join when they have descended in depth. In exactly the same way, out of
three or more veins, one may be formed in depth.

[Illustration 66b (Intersections of Veins)]

However, such a junction of veins sometimes disunites and in this way
it happens that the vein which was the right-hand vein becomes the left;
and again, the one which was on the left becomes the right.

Furthermore, one vein may be split and divided into parts by some hard
rock resembling a beak, or stringers in soft rock may sunder the vein
and make two or more. These sometimes join together again and sometimes
remain divided.

[Illustration 67 (Intersections of Veins): A, B--Veins dividing. C--The
same joining.]

Whether a vein is separating from or uniting with another can be
determined only from the seams in the rocks. For example, if a principal
vein runs from the east to the west, the rock seams descend in depth
likewise from the east toward the west, and the associated vein which
joins with the principal vein, whether it runs from the south or the
north, has its rock seams extending in the same way as its own, and they
do not conform with the seams in the rock of the principal vein--which
remain the same after the junction--unless the associated vein proceeds
in the same direction as the principal vein. In that case we name the
broader vein the principal one, and the narrower the associated vein.
But if the principal vein splits, the rock seams which belong
respectively to the parts, keep the same course when descending in depth
as those of the principal vein.

[Illustration 68 (Intersections of Veins): A, C--_Vena dilatata_
crossing a _vena profunda_. B--_Vena profunda_. D, E--_Vena dilatata_
which junctions with a _vena profunda_. F--_Vena profunda_. G--_Vena
dilatata_. H, I--Its divided parts. K--_Vena profunda_ which divides the
_vena dilatata_.]

But enough of _venae profundae_, their junctions and divisions. Now we
come to _venae dilatatae_. A _vena dilatata_ may either cross a _vena
profunda_, or join with it, or it may be cut by a _vena profunda_, and
be divided into parts.

[Illustration 69a (Veins in mountain): A--The "beginning" (_origo_).
B--The "end" (_finis_). C--The "head" (_caput_). D--The "tail"
(_cauda_).]

Finally, a _vena profunda_ has a "beginning" (_origo_), an "end"
(_finis_), a "head" (_caput_), and a "tail" (_cauda_). That part whence
it takes its rise is said to be its "beginning," that in which it
terminates the "end." Its "head"[5] is that part which emerges into
daylight; its "tail" that part which is hidden in the earth. But miners
have no need to seek the "beginning" of veins, as formerly the kings of
Egypt sought for the source of the Nile, but it is enough for them to
discover some other part of the vein and to recognise its direction, for
seldom can either the "beginning" or the "end" be found. The direction
in which the head of the vein comes into the light, or the direction
toward which the tail extends, is indicated by its footwall and
hangingwall. The latter is said to hang, and the former to lie. The vein
rests on the footwall, and the hangingwall overhangs it; thus, when we
descend a shaft, the part to which we turn the face is the footwall and
seat of the vein, that to which we turn the back is the hangingwall.
Also in another way, the head accords with the footwall and the tail
with the hangingwall, for if the footwall is toward the south, the vein
extends its head into the light toward the south; and the hangingwall,
because it is always opposite to the footwall, is then toward the north.
Consequently the vein extends its tail toward the north if it is an
inclined _vena profunda_. Similarly, we can determine with regard to
east and west and the subordinate and their intermediate directions. A
_vena profunda_ which descends into the earth may be either vertical,
inclined, or crooked; the footwall of an inclined vein is easily
distinguished from the hangingwall, but it is not so with a vertical
vein; and again, the footwall of a crooked vein is inverted and changed
into the hangingwall, and contrariwise the hangingwall is twisted into
the footwall, but very many of these crooked veins may be turned back to
vertical or inclined ones.

[Illustration 69b (Veins in mountain): A--The "beginning." B--The "end."
C, D--The "sides."]

A _vena dilatata_ has only a "beginning" and an "end," and in the place
of the "head" and "tail" it has two sides.

[Illustration 70 (Veins in mountain): A--The "beginning." B--The "end."
C--The "head." D--The "tail." E--Transverse vein.]

A _vena cumulata_ has a "beginning," an "end," a "head," and a "tail,"
just as a _vena profunda_. Moreover, a _vena cumulata_, and likewise a
_vena dilatata_, are often cut through by a transverse _vena profunda_.

[Illustration 71a (Fibra dilatata): A, B--Veins. C--Transverse
stringer. D--Oblique stringer. E--Associated stringer. F--_Fibra
dilatata_.]

Stringers (_fibrae_)[6], which are little veins, are classified into
_fibrae transversae_, _fibrae obliquae_ which cut the vein obliquely,
_fibrae sociae_, _fibrae dilatatae_, and _fibrae incumbentes_. The
_fibra transversa_ crosses the vein; the _fibra obliqua_ crosses the
vein obliquely; the _fibra socia_ joins with the vein itself; the _fibra
dilatata_, like the _vena dilatata_, penetrates through it; but the
_fibra dilatata_, as well as the _fibra profunda_, is usually found
associated with a vein.

[Illustration 71b (Fibra incumbens): A--Vein. B--_Fibra incumbens_ from
the surface of the hangingwall. C--Same from the footwall.]

The _fibra incumbens_ does not descend as deeply into the earth as the
other stringers, but lies on the vein, as it were, from the surface to
the hangingwall or footwall, from which it is named _Subdialis_.[7]

In truth, as to direction, junctions, and divisions, the stringers are
not different from the veins.

[Illustration 72 (Seams in the Rocks): A--Seams which proceed from the
east. B--The inverse.]

Lastly, the seams, which are the very finest stringers (_fibrae_),
divide the rock, and occur sometimes frequently, sometimes rarely. From
whatever direction the vein comes, its seams always turn their heads
toward the light in the same direction. But, while the seams usually run
from one point of the compass to another immediately opposite it, as for
instance, from east to west, if hard stringers divert them, it may
happen that these very seams, which before were running from east to
west, then contrariwise proceed from west to east, and the direction of
the rocks is thus inverted. In such a case, the direction of the veins
is judged, not by the direction of the seams which occur rarely, but by
those which constantly recur.

[Illustration 73 (Veins in mountain): A--Solid vein. B--Solid stringer.
C--Cavernous vein. D--Cavernous stringer. E--Barren vein. F--Barren
stringer.]

Both veins or stringers may be solid or drusy, or barren of minerals, or
pervious to water. Solid veins contain no water and very little air. The
drusy veins rarely contain water; they often contain air. Those which
are barren of minerals often carry water. Solid veins and stringers
consist sometimes of hard materials, sometimes of soft, and sometimes of
a kind of medium between the two.

But to return to veins. A great number of miners consider[8] that the
best veins in depth are those which run from the VI or VII direction of
the east to the VI or VII direction of the west, through a mountain
slope which inclines to the north; and whose hangingwalls are in the
south, and whose footwalls are in the north, and which have their heads
rising to the north, as explained before, always like the footwall, and
finally, whose rock seams turn their heads to the east. And the veins
which are the next best are those which, on the contrary, extend from
the VI or VII direction of the west to the VI or VII direction of the
east, through the slope of a mountain which similarly inclines to the
north, whose hangingwalls are also in the south, whose footwalls are in
the north, and whose heads rise toward the north; and lastly, whose rock
seams raise their heads toward the west. In the third place, they
recommend those veins which extend from XII north to XII south, through
the slope of a mountain which faces east; whose hangingwalls are in the
west, whose footwalls are in the east; whose heads rise toward the east;
and whose rock seams raise their heads toward the north. Therefore they
devote all their energies to those veins, and give very little or
nothing to those whose heads, or the heads of whose rock seams rise
toward the south or west. For although they say these veins sometimes
show bright specks of pure metal adhering to the stones, or they come
upon lumps of metal, yet these are so few and far between that despite
them it is not worth the trouble to excavate such veins; and miners who
persevere in digging in the hope of coming upon a quantity of metal,
always lose their time and trouble. And they say that from veins of this
kind, since the sun's rays draw out the metallic material, very little
metal is gained. But in this matter the actual experience of the miners
who thus judge of the veins does not always agree with their opinions,
nor is their reasoning sound; since indeed the veins which run from east
to west through the slope of a mountain which inclines to the south,
whose heads rise likewise to the south, are not less charged with
metals, than those to which miners are wont to accord the first place in
productiveness; as in recent years has been proved by the St. Lorentz
vein at Abertham, which our countrymen call Gottsgaab, for they have dug
out of it a large quantity of pure silver; and lately a vein in
Annaberg, called by the name of Himmelsch hoz[9], has made it plain by
the production of much silver that veins which extend from the north to
the south, with their heads rising toward the west, are no less rich in
metals than those whose heads rise toward the east.

It may be denied that the heat of the sun draws the metallic material
out of these veins; for though it draws up vapours from the surface of
the ground, the rays of the sun do not penetrate right down to the
depths; because the air of a tunnel which is covered and enveloped by
solid earth to the depth of only two fathoms is cold in summer, for the
intermediate earth holds in check the force of the sun. Having observed
this fact, the inhabitants and dwellers of very hot regions lie down by
day in caves which protect them from the excessive ardour of the sun.
Therefore it is unlikely that the sun draws out from within the earth
the metallic bodies. Indeed, it cannot even dry the moisture of many
places abounding in veins, because they are protected and shaded by the
trees. Furthermore, certain miners, out of all the different kinds of
metallic veins, choose those which I have described, and others, on the
contrary, reject copper mines which are of this sort, so that there
seems to be no reason in this. For what can be the reason if the sun
draws no copper from copper veins, that it draws silver from silver
veins, and gold from gold veins?

Moreover, some miners, of whose number was Calbus[10], distinguish
between the gold-bearing rivers and streams. A river, they say, or a
stream, is most productive of fine and coarse grains of gold when it
comes from the east and flows to the west, and when it washes against
the foot of mountains which are situated in the north, and when it has a
level plain toward the south or west. In the second place, they esteem a
river or a stream which flows in the opposite course from the west
toward the east, and which has the mountains to the north and the level
plain to the south. In the third place, they esteem the river or the
stream which flows from the north to the south and washes the base of
the mountains which are situated in the east. But they say that the
river or stream is least productive of gold which flows in a contrary
direction from the south to the north, and washes the base of mountains
which are situated in the west. Lastly, of the streams or rivers which
flow from the rising sun toward the setting sun, or which flow from the
northern parts to the southern parts, they favour those which approach
the nearest to the lauded ones, and say they are more productive of
gold, and the further they depart from them the less productive they
are. Such are the opinions held about rivers and streams. Now, since
gold is not generated in the rivers and streams, as we have maintained
against Albertus[11] in the book entitled "_De Subterraneorum Ortu et
Causis_," Book V, but is torn away from the veins and stringers and
settled in the sands of torrents and water-courses, in whatever
direction the rivers or streams flow, therefore it is reasonable to
expect to find gold therein; which is not opposed by experience.
Nevertheless, we do not deny that gold is generated in veins and
stringers which lie under the beds of rivers or streams, as in other
places.

     END OF BOOK III.


FOOTNOTES:

[1] Modern nomenclature in the description of ore-deposits is so
impregnated with modern views of their origin, that we have considered
it desirable in many instances to adopt the Latin terms used by the
author, for we believe this method will allow the reader greater freedom
of judgment as to the author's views. The Latin names retained are
usually expressive even to the non-Latin student. In a general way, a
_vena profunda_ is a fissure vein, a _vena dilatata_ is a bedded
deposit, and a _vena cumulata_ an impregnation, or a replacement or a
_stockwerk_. The _canales_, as will appear from the following footnote,
were ore channels. "The seams of the rocks" (_commissurae saxorum_) are
very puzzling. The author states, as appears in the following note, that
they are of two kinds,--contemporaneous with the formation of the rocks,
and also of the nature of veinlets. However, as to their supposed
relation to the strike of veins, we can offer no explanation. There are
passages in this chapter where if the word "ore-shoot" were introduced
for "seams in the rocks" the text would be intelligible. That is, it is
possible to conceive the view that the determination of whether an
east-west vein ran east or ran west was dependent on the dip of the
ore-shoot along the strike. This view, however, is utterly impossible to
reconcile with the description and illustration of _commissurae saxorum_
given on page 54, where they are defined as the finest stringers. The
following passage from the _Nuetzliche Bergbuechlin_ (see Appendix), reads
very much as though the dip of ore-shoots was understood at this time in
relation to the direction of veins. "Every vein (_gang_) has two
(outcrops) _ausgehen_, one of the _ausgehen_ is toward daylight along
the whole length of the vein, which is called the _ausgehen_ of the
whole vein. The other _ausgehen_ is contrary to or toward the strike
(_streichen_) of the vein, according to its rock (_gestein_), that is
called the _gesteins ausgehen_; for instance, every vein that has its
strike from east to west has its _gesteins ausgehen_ to the east, and
_vice-versa_."

Agricola's classification of ore-deposits, after the general distinction
between alluvial and _in situ_ deposits, is based entirely upon form, as
will be seen in the quotation below relating to the origin of _canales_.
The German equivalents in the Glossary are as follows:--

  Fissure vein (_vena profunda_)              _Gang._
  Bedded deposit (_vena dilatata_)            _Schwebender gang oder fletze._
  Stockwerk or impregnation (_vena cumulata_) _Geschute oder stock._
  Stringer (_fibra_)                          _Klufft._
  Seams or joints (_commissurae saxorum_)     _Absetzen des gesteins._

It is interesting to note that in _De Natura Fossilium_ he describes
coal and salt, and later in _De Re Metallica_ he describes the Mannsfeld
copper schists, as all being _venae dilatatae_. This nomenclature and
classification is not original with Agricola. Pliny (XXXIII, 21) uses
the term _vena_ with no explanations, and while Agricola coined the
Latin terms for various kinds of veins, they are his transliteration of
German terms already in use. The _Nuetzliche Bergbuechlin_ gives this same
classification.

HISTORICAL NOTE ON THE THEORY OF ORE DEPOSITS. Prior to Agricola there
were three schools of explanation of the phenomena of ore deposits, the
orthodox followers of the Genesis, the Greek Philosophers, and the
Alchemists. The geology of the Genesis--the contemporaneous formation of
everything--needs no comment other than that for anyone to have proposed
an alternative to the dogma of the orthodox during the Middle Ages,
required much independence of mind. Of the Greek views--which are meagre
enough--that of the Peripatetics greatly dominated thought on natural
phenomena down to the 17th century. Aristotle's views may be summarized:
The elements are earth, water, air, and fire; they are transmutable and
never found pure, and are endowed with certain fundamental properties
which acted as an "efficient" force upon the material cause--the
elements. These properties were dryness and dampness and heat and cold,
the latter being active, the former passive. Further, the elements were
possessed of weight and lightness, for instance earth was absolutely
heavy, fire absolutely light. The active and passive properties existed
in binary combinations, one of which is characteristic, _i.e._, "earth"
is cold and dry, water damp and cold, fire hot and dry, air hot and wet;
transmutation took place, for instance, by removing the cold from water,
when air resulted (really steam), and by removing the dampness from
water, when "earth" resulted (really any dissolved substance). The
transmutation of the elements in the earth (meaning the globe) produces
two "exhalations," the one fiery (probably meaning gases), the other
damp (probably meaning steam). The former produces stones, the latter
the metals. Theophrastus (On Stones, I to VII.) elaborates the views of
Aristotle on the origin of stones, metals, etc.: "Of things formed in
the earth some have their origin from water, others from earth. Water is
the basis of metals, silver, gold, and the rest; 'earth' of stones, as
well the more precious as the common.... All these are formed by
solidification of matter pure and equal in its constituent parts, which
has been brought together in that state by mere afflux or by means of
some kind of percolation, or separated.... The solidification is in some
of these substances due to heat and in others to cold." (Based on Hill's
Trans., pp. 3-11). That is, the metals inasmuch as they become liquid
when heated must be in a large part water, and, like water, they
solidify with cold. Therefore, the "metals are cold and damp." Stones,
on the other hand, solidify with heat and do not liquefy, therefore,
they are "dry and hot" and partake largely of "earth." This "earth" was
something indefinite, but purer and more pristine than common clay. In
discussing the ancient beliefs with regard to the origin of deposits, we
must not overlook the import of the use of the word "vein" (_vena_) by
various ancient authors including Pliny (XXXIII, 21), although he offers
no explanation of the term.

During the Middle Ages there arose the horde of Alchemists and
Astrologers, a review of the development of whose muddled views is but
barren reading. In the main they held more or less to the Peripatetic
view, with additions of their own. Geber (13th (?) century, see Appendix
B) propounded the conception that all metals were composed of varying
proportions of "spiritual" sulphur and quicksilver, and to these
Albertus Magnus added salt. The Astrologers contributed the idea that
the immediate cause of the metals were the various planets. The only
work devoted to description of ore-deposits prior to Agricola was the
_Bergbuechlin_ (about 1520, see Appendix B), and this little book
exhibits the absolute apogee of muddled thought derived from the
Peripatetics, the Alchemists, and the Astrologers. We believe it is of
interest to reproduce the following statement, if for no other reason
than to indicate the great advance in thought shown by Agricola.

"The first chapter or first part; on the common origin of ore, whether
silver, gold, tin, copper, iron, or lead ore, in which they all appear
together, and are called by the common name of metallic ore. It must be
noticed that for the washing or smelting of metallic ore, there must be
the one who works and the thing that is worked upon, or the material
upon which the work is expended. The general worker (efficient force) on
the ore and on all things that are born, is the heavens, its movement,
its light and influences, as the philosophers say. The influence of the
heavens is multiplied by the movement of the firmaments and the
movements of the seven planets. Therefore, every metallic ore receives a
special influence from its own particular planet, due to the properties
of the planet and of the ore, also due to properties of heat, cold,
dampness, and dryness. Thus gold is of the Sun or its influence, silver
of the Moon, tin of Jupiter, copper of Venus, iron of Mars, lead of
Saturn, and quicksilver of Mercury. Therefore, metals are often called
by these names by hermits and other philosophers. Thus gold is called
the Sun, in Latin _Sol_, silver is called the Moon, in Latin _Luna_, as
is clearly stated in the special chapters on each metal. Thus briefly
have we spoken of the 'common worker' of metal and ore. But the thing
worked upon, or the common material of all metals, according to the
opinion of the learned, is sulphur and quicksilver, which through the
movement and influence of the heavens must have become united and
hardened into one metallic body or one ore. Certain others hold that
through the movement and the influence of the heavens, vapours or
_braden_, called mineral exhalations, are drawn up from the depths of
the earth, from sulphur and quicksilver, and the rising fumes pass into
the veins and stringers and are united through the effect of the planets
and made into ore. Certain others hold that metal is not formed from
quicksilver, because in many places metallic ore is found and no
quicksilver. But instead of quicksilver they maintain a damp and cold
and slimy material is set up on all sulphur which is drawn out from the
earth, like your perspiration, and from that mixed with sulphur all
metals are formed. Now each of these opinions is correct according to a
good understanding and right interpretation; the ore or metal is formed
from the fattiness of the earth as the material of the first degree
(primary element), also the vapours or _braden_ on the one part and the
materials on the other part, both of which are called quicksilver.
Likewise in the mingling or union of the quicksilver and the sulphur in
the ore, the sulphur is counted the male and quicksilver the female, as
in the bearing or conception of a child. Also the sulphur is a special
worker in ore or metal.

"The second chapter or part deals with the general capacity of the
mountain. Although the influence of the heavens and the fitness of the
material are necessary to the formation of ore or metal, yet these are
not enough thereto. But there must be adaptability of the natural vessel
in which the ore is formed, such are the veins, namely _steinendegange_,
_flachgange_, _schargange_, _creutzgange_, or as these may be termed in
provincial names. Also the mineral force must have easy access to the
natural vessel such as through the _kluffte_ (stringers), namely
_hengkluft_, _querklufte_, _flachekluffte_, _creutzklufft_, and other
occasional _flotzwerk_, according to their various local names. Also
there must be a suitable place in the mountain which the veins and
stringers can traverse."

AGRICOLA'S VIEWS ON THE ORIGIN OF ORE DEPOSITS. Agricola rejected
absolutely the Biblical view which, he says, was the opinion of the
vulgar; further, he repudiates the alchemistic and astrological view
with great vigour. There can be no doubt, however, that he was greatly
influenced by the Peripatetic philosophy. He accepted absolutely the
four elements--earth, fire, water, and air, and their "binary"
properties, and the theory that every substance had a material cause
operated upon by an efficient force. Beyond this he did not go, and a
large portion of _De Ortu et Causis_ is devoted to disproof of the
origin of metals and stones from the Peripatetic "exhalations."

No one should conclude that Agricola's theories are set out with the
clarity of Darwin or Lyell. However, the matter is of such importance in
the history of the theory of ore-deposits, and has been either so
ignored or so coloured by the preconceptions of narrators, that we
consider it justifiable to devote the space necessary to a reproduction
of his own statements in _De Ortu et Causis_ and other works. Before
doing so we believe it will be of service to readers to summarize these
views, and in giving quotations from the Author's other works, to group
them under special headings, following the outline of his theory given
below. His theory was:--

(1) Openings in the earth (_canales_) were formed by the erosion of
subterranean waters.

(2) These ground waters were due (_a_) to the infiltration of the
surface waters, rain, river, and sea water; (_b_) to the condensation of
steam (_halitus_) arising from the penetration of the surface waters to
greater depths,--the production of this _halitus_ being due to
subterranean heat, which in his view was in turn due in the main to
burning bitumen (a comprehensive genera which embraced coal).

(3) The filling of these _canales_ is composed of "earth," "solidified
juices," "stone," metals, and "compounds," all deposited from water and
"juices" circulating in the _canales_. (See also note 4, page 1).

"Earth" comprises clay, mud, ochre, marl, and "peculiar earths"
generally. The origin of these "earths" was from rocks, due to erosion,
transportation, and deposition by water. "Solidified juices" (_succi
concreti_) comprised salt, soda, vitriol, bitumen, etc., being generally
those substances which he conceived were soluble in and deposited from
water. "Stones" comprised precious, semi-precious, and unusual stones,
such as quartz, fluor-spar, etc., as distinguished from country rock;
the origin of these he attributed in minor proportion to transportation
of fragments of rock, but in the main to deposits from ordinary mineral
juice and from "stone juice" (_succus lapidescens_). Metals comprised
the seven traditional metals; the "compounds" comprised the metallic
minerals; and both were due to deposition from juices, the compounds
being due to a mixture of juices. The "juices" play the most important
part in Agricola's theory. Each substance had its own particular juice,
and in his theory every substance had a material and an efficient cause,
the first being the juice, the second being heat or cold. Owing to the
latter the juices fell into two categories--those solidified by heat
(_i.e._, by evaporation, such as salt), and those solidified by cold,
(_i.e._, because metals melt and flow by heat, therefore their
solidification was due to cold, and the juice underwent similar
treatment). As to the origin of these juices, some were generated by the
solution of their own particular substance, but in the main their origin
was due to the combination of "dry things," such as "earth," with water,
the mixture being heated, and the resultant metals depended upon the
proportions of "earth" and water. In some cases we have been inclined to
translate _succus_ (juice) as "solution," but in other cases it embraced
substances to which this would not apply, and we feared implying in the
text a chemical understanding not warranted prior to the atomic theory.
In order to distinguish between earths, (clays, etc.,) the Peripatetic
"earth" (a pure element) and the earth (the globe) we have given the two
former in quotation marks. There is no doubt some confusion between
earth (clays, etc.) and the Peripatetic "earth," as the latter was a
pure substance not found in its pristine form in nature; it is, however,
difficult to distinguish between the two.

ORIGIN OF CANALES (_De Ortu_, p. 35). "I now come to the _canales_ in
the earth. These are veins, veinlets, and what are called 'seams in the
rocks.' These serve as vessels or receptacles for the material from
which minerals (_res fossiles_) are formed. The term _vena_ is most
frequently given to what is contained in the _canales_, but likewise the
same name is applied to the _canales_ themselves. The term vein is
borrowed from that used for animals, for just as their veins are
distributed through all parts of the body, and just as by means of the
veins blood is diffused from the liver throughout the whole body, so
also the veins traverse the whole globe, and more particularly the
mountainous districts; and water runs and flows through them. With
regard to veinlets or stringers and 'seams in the rocks,' which are the
thinnest stringers, the following is the mode of their arrangement.
Veins in the earth, just like the veins of an animal, have certain
veinlets of their own, but in a contrary way. For the larger veins of
animals pour blood into the veinlets, while in the earth the humours are
usually poured from the veinlets into the larger veins, and rarely flow
from the larger into the smaller ones. As for the seams in the rocks
(_commissurae saxorum_) we consider that they are produced by two
methods: by the first, which is peculiar to themselves, they are formed
at the same time as the rocks, for the heat bakes the refractory
material into stone and the non-refractory material similarly heated
exhales its humours and is made into 'earth,' generally friable. The
other method is common also to veins and veinlets, when water is
collected into one place it softens the rock by its liquid nature, and
by its weight and pressure breaks and divides it. Now, if the rock is
hard, it makes seams in the rocks and veinlets, and if it is not too
hard it makes veins. However, if the rocks are not hard, seams and
veinlets are created as well as veins. If these do not carry a very
large quantity of water, or if they are pressed by a great volume of it,
they soon discharge themselves into the nearest veins. The following
appears to be the reason why some veinlets or stringers and veins are
_profundae_ and others _dilatatae_. The force of the water crushes and
splits the brittle rocks; and when they are broken and split, it forces
its way through them and passes on, at one time in a downward direction,
making small and large _venae profundae_, at another time in a lateral
direction, in which way _venae dilatatae_ are formed. Now since in each
class there are found some which are straight, some inclined, and some
crooked, it should be explained that the water makes the _vena profunda_
straight when it runs straight downward, inclined when it runs in an
inclined direction; and that it makes a _vena dilatata_ straight when it
runs horizontally to the right or left, and in a similar way inclined
when it runs in a sloping direction. Stringers and large veins of the
_profunda_ sort, extending for considerable lengths, become crooked from
two causes. In one case when narrow veins are intersected by wide ones,
then the latter bend or drag the former a little. In the other case,
when the water runs against very hard rock, being unable to break
through, it goes around the nearest way, and the stringers and veins are
formed bent and crooked. This last is also the reason we sometimes see
crooked small and large _venae dilatatae_, not unlike the gentle rise
and fall of flowing water. Next, _venae profundae_ are wide, either
because of abundant water or because the rock is fragile. On the other
hand, they are narrow, either because but little water flows and
trickles through them, or because the rock is very hard. The _venae
dilatatae_, too, for the same reasons, are either thin or thick. There
are other differences, too, in stringers and veins, which I will explain
in my work _De Re Metallica_.... There is also a third kind of vein
which, as it cannot be described as a wide _vena profunda_, nor as a
thick _vena dilatata_, we will call a _vena cumulata_. These are nothing
else than places where some species of mineral is accumulated; sometimes
exceeding in depth and also in length and breadth 600 feet; sometimes,
or rather generally, not so deep nor so long, nor so wide. These are
created when water has broken away the rock for such a length, breadth,
and thickness, and has flung aside and ejected the stones and sand from
the great cavern which is thus made; and afterward when the mouth is
obstructed and closed up, the whole cavern is filled with material from
which there is in time produced some one or more minerals. Now I have
stated when discoursing on the origin of subterranean humours, that
water erodes away substances inside the earth, just as it does those on
the surface, and least of all does it shun minerals; for which reason we
may daily see veinlets and veins sometimes filled with air and water,
but void and empty of mining products, and sometimes full of these same
materials. Even those which are empty of minerals become finally
obstructed, and when the rock is broken through at some other point the
water gushes out. It is certain that old springs are closed up in some
way and new ones opened in others. In the same manner, but much more
easily and quickly than in the solid rock, water produces stringers and
veins in surface material, whether it be in plains, hills, or mountains.
Of this kind are the stringers in the banks of rivers which produce
gold, and the veins which produce peculiar earth. So in this manner in
the earth are made _canales_ which bear minerals."

ORIGIN OF GROUND WATERS. (_De Ortu_ p. 5). "... Besides rain there is
another kind of water by which the interior of the earth is soaked, so
that being heated it can continually give off _halitus_, from which
arises a great and abundant force of waters." In description of the
_modus operandi_ of _halitum_, he says (p. 6): "... _Halitus_ rises to
the upper parts of the _canales_, where the congealing cold turns it
into water, which by its gravity and weight again runs down to the
lowest parts and increases the flow of water if there is any. If any
finds its way through a _canales dilatata_ the same thing happens, but
it is carried a long way from its place of origin. The first phase of
distillation teaches us how this water is produced, for when that which
is put into the ampulla is warmed it evaporates (_expirare_), and this
_halitus_ rising into the operculum is converted by cold into water,
which drips through the spout. In this way water is being continually
created underground." (_De Ortu_, p. 7): "And so we know from all this
that of the waters which are under the earth, some are collected from
rain, some arise from _halitus_ (steam), some from river-water, some
from sea-water; and we know that the _halitum_ is produced within the
earth partly from rain-water, partly from river-water, and partly from
sea-water." It would require too much space to set out Agricola's views
upon the origin of the subterranean heat which produced this steam. It
is an involved theory embracing clashing winds, burning bitumen, coal,
etc., and is fully set out in the latter part of Book II, _De Ortu et
Causis_.

ORIGIN OF GANGUE MINERALS. It is necessary to bear in mind that Agricola
divided minerals (_res fossiles_--"Things dug up," see note 4, p. 1)
into "earths," "solidified juices," "stones," "metals," and "compounds;"
and, further, to bear in mind that in his conception of the origin of
things generally, he was a disciple of the Peripatetic logic of a
"material substance" and an "efficient force," as mentioned above.

As to the origin of "earths," he says (_De Ortu_, p. 38): "Pure and
simple 'earth' originates in the _canales_ in the following way: rain
water, which is absorbed by the surface of the earth, first of all
penetrates and passes into the inner parts of the earth and mixes with
it; next, it is collected from all sides into stringers and veins, where
it, and sometimes water of other origin, erodes the 'earth' away,--a
great quantity of it if the stringers and veins are in 'earth,' a small
quantity if they are in rock. The softer the rock is, the more the water
wears away particles by its continual movement. To this class of rock
belongs limestone, from which we see chalk, clay, and marl, and other
unctuous 'earths' made; also sandstone, from which are made those barren
'earths' which we may see in ravines and on bare rocks. For the rain
softens limestone or sandstone and carries particles away with it, and
the sediment collects together and forms mud, which afterward solidifies
into some kind of 'earth.' In a similar way under the ground the power
of water softens the rock and dissolves the coarser fragments of stone.
This is clearly shown by the following circumstance, that frequently the
powder of rock or marble is found in a soft state and as if partly
dissolved. Now, the water carries this mixture into the course of some
underground _canalis_, or dragging it into narrow places, filters away.
And in each case the water flows away and a pure and uniform material is
left from which 'earth' is made.... Particles of rock, however, are only
by force of long time so softened by water as to become similar to
particles of 'earth.' It is possible to see 'earth' being made in this
way in underground _canales_ in the earth, when drifts or tunnels are
driven into the mountains, or when shafts are sunk, for then the
_canales_ are laid bare; also it can be seen above ground in ravines, as
I have said, or otherwise disclosed. For in both cases it is clear to
the eye that they are made out of the 'earth' or rocks, which are often
of the same colour. And in just the same way they are made in the
springs which the veins discharge. Since all those things which we see
with our eyes and which are perceived with our senses, are more clearly
understood than if they were learnt by means of reasoning, we deem it
sufficient to explain by this argument our view of the origin of
'earth.' In the manner which I have described, 'earths' originate in
veins and veinlets, seams in the rocks, springs, ravines, and other
openings, therefore all 'earths' are made in this way. As to those that
are found in underground _canales_ which do not appear to have been
derived from the earth or rock adjoining, these have undoubtedly been
carried by the water for a greater distance from their place of origin;
which may be made clear to anyone who seeks their source."

On the origin of solidified juices he states (_De Ortu_, p. 43): "I will
now speak of solidified juices (_succi concreti_). I give this name to
those minerals which are without difficulty resolved into liquids
(_humore_). Some stones and metals, even though they are themselves
composed of juices, have been compressed so solidly by the cold that
they can only be dissolved with difficulty or not at all.... For juices,
as I said above, are either made when dry substances immersed in
moisture are cooked by heat, or else they are made when water flows over
'earth,' or when the surrounding moisture corrodes metallic material; or
else they are forced out of the ground by the power of heat alone.
Therefore, solidified juices originate from liquid juices, which either
heat or cold have condensed. But that which heat has dried, fire reduces
to dust, and moisture dissolves. Not only does warm or cold water
dissolve certain solidified juices, but also humid air; and a juice
which the cold has condensed is liquefied by fire and warm water. A
salty juice is condensed into salt; a bitter one into soda; an
astringent and sharp one into alum or into vitriol. Skilled workmen in a
similar way to nature, evaporate water which contains juices of this
kind until it is condensed; from salty ones they make salt, from
aluminous ones alum, from one which contains vitriol they make vitriol.
These workmen imitate nature in condensing liquid juices with heat, but
they cannot imitate nature in condensing them by cold. From an
astringent juice not only is alum made and vitriol, but also _sory_,
_chalcitis_, and _misy_, which appears to be the 'flower' of vitriol,
just as _melanteria_ is of _sory_. (See note on p. 573 for these
minerals.) When humour corrodes pyrites so that it is friable, an
astringent juice of this kind is obtained."

ON THE ORIGIN OF STONES (_De Ortu_, p. 50), he states: "It is now
necessary to review in a few words what I have said as to all of the
material from which stones are made; there is first of all mud; next
juice which is solidified by severe cold; then fragments of rock;
afterward stone juice (_succus lapidescens_), which also turns to stone
when it comes out into the air; and lastly, everything which has pores
capable of receiving a stony juice." As to an "efficient force," he
states (p. 54): "But it is now necessary that I should explain my own
view, omitting the first and antecedent causes. Thus the immediate
causes are heat and cold; next in some way a stony juice. For we know
that stones which water has dissolved, are solidified when dried by
heat; and on the contrary, we know that stones which melt by fire, such
as quartz, solidify by cold. For solidification and the conditions which
are opposite thereto, namely, dissolving and liquefying, spring from
causes which are the opposite to each other. Heat, driving the water
(_humorem_) out of a substance, makes it hard; and cold, by withdrawing
the air, solidifies the same stone firmly. But if a stony juice, either
alone or mixed with water, finds its way into the pores either of plants
or animals ... it creates stones.... If stony juice is obtained in
certain stony places and flows through the veins, for this reason
certain springs, brooks, streams, and lakes, have the power of turning
things to stone."

ON THE ORIGIN OF METALS, he says (_De Ortu_, p. 71): "Having now refuted
the opinions of others, I must explain what it really is from which
metals are produced. The best proof that there is water in their
materials is the fact that they flow when melted, whereas they are again
solidified by the cold of air or water. This, however, must be
understood in the sense that there is more water in them and less
'earth'; for it is not simply water that is their substance but water
mixed with 'earth.' And such a proportion of 'earth' is in the mixture
as may obscure the transparency of the water, but not remove the
brilliance which is frequently in unpolished things. Again, the purer
the mixture, the more precious the metal which is made from it, and the
greater its resistance to fire. But what proportion of 'earth' is in
each liquid from which a metal is made no mortal can ever ascertain, or
still less explain, but the one God has known it, Who has given certain
sure and fixed laws to nature for mixing and blending things together.
It is a juice (_succus_) then, from which metals are formed; and this
juice is created by various operations. Of these operations the first is
a flow of water which softens the 'earth' or carries the 'earth' along
with it, thus there is a mixture of 'earth' and water, then the power of
heat works upon the mixtures so as to produce that kind of a juice. We
have spoken of the substance of metals; we must now speak of their
efficient cause.... (p. 75): We do not deny the statement of Albertus
Magnus that the mixture of 'earth' and water is baked by subterranean
heat to a certain denseness, but it is our opinion that the juice so
obtained is afterward solidified by cold so as to become a metal.... We
grant, indeed, that heat is the efficient cause of a good mixture of
elements, and also cooks this same mixture into a juice, but until this
juice is solidified by cold it is not a metal.... (p. 76): This view of
Aristotle is the true one. For metals melt through the heat and somehow
become softened; but those which have become softened through heat are
again solidified by the influence of cold, and, on the contrary, those
which become softened by moisture are solidified by heat."

ON THE ORIGIN OF COMPOUNDS, he states (_De Ortu_, p. 80): "There now
remain for our consideration the compound minerals (_mistae_), that is
to say, minerals which contain either solidified juice (_succus
concretus_) and 'stone,' or else metal or metals and 'stone,' or else
metal-coloured 'earth,' of which two or more have so grown together by
the action of cold that one body has been created. By this sign they are
distinguished from mixed minerals (_composita_), for the latter have not
one body. For example, pyrites, galena, and ruby silver are reckoned in
the category of compound minerals, whereas we say that metallic 'earths'
or stony 'earths' or 'earths' mingled with juices, are mixed minerals;
or similarly, stones in which metal or solidified juices adhere, or
which contain 'earth.' But of both these classes I will treat more fully
in my book _De Natura Fossilium_. I will now discuss their origin in a
few words. A compound mineral is produced when either a juice from which
some metal is obtained, or a _humour_ and some other juice from which
stone is obtained, are solidified by cold, or when two or more juices of
different metals mixed with the juice from which stone is made, are
condensed by the same cold, or when a metallic juice is mixed with
'earth' whose whole mass is stained with its colour, and in this way
they form one body. To the first class belongs _galena_, composed of
lead juice and of that material which forms the substance of opaque
stone. Similarly, transparent ruby silver is made out of silver juice
and the juice which forms the substance of transparent stone; when it is
smelted into pure silver, since from it is separated the transparent
juice, it is no longer transparent. Then too, there is pyrites, or
_lapis fissilis_, from which sulphur is melted. To the second kind
belongs that kind of pyrites which contains not only copper and stone,
but sometimes copper, silver, and stone; sometimes copper, silver, gold,
and stone; sometimes silver, lead, tin, copper and silver glance. That
compound minerals consist of stone and metal is sufficiently proved by
their hardness; that some are made of 'earth' and metal is proved from
brass, which is composed of copper and calamine; and also proved from
white brass, which is coloured by artificial white arsenic. Sometimes
the heat bakes some of them to such an extent that they appear to have
flowed out of blazing furnaces, which we may see in the case of _cadmia_
and pyrites. A metallic substance is produced out of 'earth' when a
metallic juice impregnating the 'earth' solidifies with cold, the
'earth' not being changed. A stony substance is produced when viscous
and non-viscous 'earth' are accumulated in one place and baked by heat;
for then the viscous part turns into stone and the non-viscous is only
dried up."

THE ORIGIN OF JUICES. The portion of Agricola's theory surrounding this
subject is by no means easy to follow in detail, especially as it is
difficult to adjust one's point of view to the Peripatetic elements,
fire, water, earth, and air, instead of to those of the atomic theory
which so dominates our every modern conception. That Agricola's 'juice'
was in most cases a solution is indicated by the statement (_De Ortu_,
p. 48): "Nor is juice anything but water, which on the other hand has
absorbed 'earth' or has corroded or touched metal and somehow become
heated." That he realized the difference between mechanical suspension
and solution is evident from (_De Ortu_, p. 50): "A stony juice differs
from water which has abraded something from rock, either because it has
more of that which deposits, or because heat, by cooking water of that
kind, has thickened it, or because there is something in it which has
powerful astringent properties." Much of the author's notion of juices
has already been given in the quotations regarding various minerals, but
his most general statement on the subject is as follows:--(_De Ortu_, p.
9): "Juices, however, are distinguished from water by their density
(_crassitudo_), and are generated in various ways--either when dry
things are soaked with moisture and the mixture is heated, in which way
by far the greatest part of juices arise, not only inside the earth, but
outside it; or when water running over the earth is made rather dense,
in which way, for the most part the juice becomes salty and bitter; or
when the moisture stands upon metal, especially copper, and corrodes it,
and in this way is produced the juice from which chrysocolla originates.
Similarly, when the moisture corrodes friable cupriferous pyrites an
acrid juice is made from which is produced vitriol and sometimes alum;
or, finally, juices are pressed out by the very force of the heat from
the earth. If the force is great the juice flows like pitch from burning
pine ... in this way we know a kind of bitumen is made in the earth. In
the same way different kinds of moisture are generated in living bodies,
so also the earth produces waters differing in quality, and in the same
way juices."

CONCLUSION. If we strip his theory of the necessary influence of the
state of knowledge of his time, and of his own deep classical learning,
we find two propositions original with Agricola, which still to-day are
fundamentals:

(1) That ore channels were of origin subsequent to their containing
rocks; (2) That ores were deposited from solutions circulating in these
openings. A scientist's work must be judged by the advancement he gave
to his science, and with this gauge one can say unhesitatingly that the
theory which we have set out above represents a much greater step from
what had gone before than that of almost any single observer since.
Moreover, apart from any tangible proposition laid down, the deduction
of these views from actual observation instead of from fruitless
speculation was a contribution to the very foundation of natural
science. Agricola was wrong in attributing the creation of ore channels
to erosion alone, and it was not until Von Oppel (_Anleitung zur
Markscheidekunst_, Dresden, 1749 and other essays), two centuries after
Agricola, that the positive proposition that ore channels were due to
fissuring was brought forward. Von Oppel, however, in neglecting
channels due to erosion (and in this term we include solution) was not
altogether sound. Nor was it until late in the 18th century that the
filling of ore channels by deposition from solutions was generally
accepted. In the meantime, Agricola's successors in the study of ore
deposits exhibited positive retrogression from the true fundamentals
advocated by him. Gesner, Utman, Meier, Lohneys, Barba, Roessler, Becher,
Stahl, Henckel, and Zimmerman, all fail to grasp the double essentials.
Other writers of this period often enough merely quote Agricola, some
not even acknowledging the source, as, for instance, Pryce (_Mineralogia
Cornubiensis_, London, 1778) and Williams (Natural History of the
Mineral Kingdom, London, 1789). After Von Oppel, the two fundamental
principles mentioned were generally accepted, but then arose the
complicated and acrimonious discussion of the origin of solutions, and
nothing in Agricola's view was so absurd as Werner's contention (_Neue
Theorie von der Entstehung der Gaenge_, Freiberg, 1791) of the universal
chemical deluge which penetrated fissures open at the surface. While it
is not the purpose of these notes to pursue the history of these
subjects subsequent to the author's time, it is due to him and to the
current beliefs as to the history of the theory of ore deposits, to call
the attention of students to the perverse representation of Agricola's
views by Werner (op. cit.) upon which most writers have apparently
relied. Why this author should be (as, for instance, by Posepny, Amer.
Inst. Mining Engineers, 1901) so generally considered the father of our
modern theory, can only be explained by a general lack of knowledge of
the work of previous writers on ore deposition. Not one of the
propositions original with Werner still holds good, while his rejection
of the origin of solutions within the earth itself halted the march of
advance in thought on these subjects for half a century. It is our hope
to discuss exhaustively at some future time the development of the
history of this, one of the most far-reaching of geologic hypotheses.

[2] The Latin _vena_, "vein," is also used by the author for ore; hence
this descriptive warning as to its intended double use.

[3] The endeavour to discover the origin of the compass with the
Chinese, Arabs, or other Orientals having now generally ceased, together
with the idea that the knowledge of the lodestone involved any
acquaintance with the compass, it is permissible to take a rational view
of the subject. The lodestone was well known even before Plato and
Aristotle, and is described by Theophrastus (see Note 10, p. 115.) The
first authentic and specific mention of the compass appears to be by
Alexander Neckam (an Englishman who died in 1217), in his works _De
Utensilibus_ and _De Naturis Rerum_. The first tangible description of
the instrument was in a letter to Petrus Peregrinus de Maricourt,
written in 1269, a translation of which was published by Sir Sylvanus
Thompson (London, 1902). His circle was divided into four quadrants and
these quarters divided into 90 degrees each. The first mention of a
compass in connection with mines so far as we know is in the _Nuetzlich
Bergbuechlin_, a review of which will be found in Appendix B. This book,
which dates from 1500, gives a compass much like the one described above
by Agricola. It is divided in like manner into two halves of 12
divisions each. The four cardinal points being marked _Mitternacht_,
_Morgen_, _Mittag_, and _Abend_. Thus the directions read were referred
to as II. after midnight, etc. According to Joseph Carne (Trans. Roy.
Geol. Socy. of Cornwall, Vol. II, 1814), the Cornish miners formerly
referred to North-South veins as 12 o'clock veins; South-East North-West
veins as 9 o'clock veins, etc.

[4] _Crudariis._ Pliny (XXXIII., 31), says:--"_Argenti vena in summo
reperta crudaria appellatur._" "Silver veins discovered at the surface
are called _crudaria._" The German translator of Agricola uses the term
_sylber gang_--silver vein, obviously misunderstanding the author's
meaning.

[5] It might be considered that the term "outcrop" could be used for
"head," but it will be noticed that a _vena dilatata_ would thus be
stated to have no outcrop.

[6] It is possible that "veinlets" would be preferred by purists, but
the word "stringer" has become fixed in the nomenclature of miners and
we have adopted it. The old English term was "stringe," and appears in
Edward Manlove's "Rhymed Chronicle," London, 1653; Pryce's, _Mineralogia
Cornubiensis_, London, 1778, pp. 103 and 329; Mawe's "Mineralogy of
Devonshire," London, 1802, p. 210, etc., etc.

[7] _Subdialis._ "In the open air." The Glossary gives the meaning as
_Ein tag klufft oder tag gehenge_--a surface stringer.

[8] The following from Chapter IV of the _Nuetzlich Bergbuechlin_ (see
Appendix B) may indicate the source of the theory which Agricola here
discards:--"As to those veins which are most profitable to work, it must
be remarked that the most suitable location for the vein is on the slope
of the mountain facing south, so its strike is from VII or VI east to VI
or VII west. According to the above-mentioned directions, the outcrop of
the whole vein should face north, its _gesteins ausgang_ toward the
east, its hangingwall toward the south, and its footwall toward the
north, for in such mountains and veins the influence of the planets is
conveniently received to prepare the matter out of which the silver is
to be made or formed.... The other strikes of veins from between east
and south to the region between west and north are esteemed more or less
valuable, according to whether they are nearer or further away from the
above-mentioned strikes, but with the same hangingwall, footwall, and
outcrops. But the veins having their strike from north to south, their
hangingwall toward the west, their footwall and their outcrops toward
the east, are better to work than veins which extend from south to
north, whose hangingwalls are toward the east, and footwalls and
outcrops toward the west. Although the latter veins sometimes yield
solid and good silver ore, still it is not sure and certain, because the
whole mineral force is completely scattered and dispersed through the
outcrop, etc."

[9] The names in the Latin are given as _Donum Divinum_--"God's Gift,"
and _Coelestis Exercitus_--"Heavenly Host." The names given in the text
are from the German Translation. The former of these mines was located
in the valley of Joachim, where Agricola spent many years as the town
physician at Joachimsthal. It is of further interest, as Agricola
obtained an income from it as a shareholder. He gives the history of the
mine (_De Veteribus et Novis Metallis_, Book I.), as follows:--"The
mines at Abertham were discovered, partly by chance, partly by science.
In the eleventh year of Charles V. (1530), on the 18th of February, a
poor miner, but one skilled in the art of mining, dwelt in the middle of
the forest in a solitary hut, and there tended the cattle of his
employer. While digging a little trench in which to store milk, he
opened a vein. At once he washed some in a bowl and saw particles of the
purest silver settled at the bottom. Overcome with joy he informed his
employer, and went to the _Bergmeister_ and petitioned that official to
give him a head mining lease, which in the language of our people he
called _Gottsgaab_. Then he proceeded to dig the vein, and found more
fragments of silver, and the miners were inspired with great hopes as to
the richness of the vein. Although such hopes were not frustrated, still
a whole year was spent before they received any profits from the mine;
whereby many became discouraged and did not persevere in paying
expenses, but sold their shares in the mine; and for this reason, when
at last an abundance of silver was being drawn out, a great change had
taken place in the ownership of the mine; nay, even the first finder of
the vein was not in possession of any share in it, and had spent nearly
all the money which he had obtained from the selling of his shares. Then
this mine yielded such a quantity of pure silver as no other mine that
has existed within our own or our fathers' memories, with the exception
of the St. George at Schneeberg. We, as a shareholder, through the
goodness of God, have enjoyed the proceeds of this 'God's Gift' since
the very time when the mine began first to bestow such riches." Later on
in the same book he gives the following further information with regard
to these mines:--"Now if all the individual mines which have proved
fruitful in our own times are weighed in the balance, the one at
Annaberg, which is known as the _Himmelsch hoz_, surpasses all others.
For the value of the silver which has been dug out has been estimated at
420,000 Rhenish gulden. Next to this comes the lead mine in
Joachimsthal, whose name is the _Sternen_, from which as much silver has
been dug as would be equivalent to 350,000 Rhenish gulden; from the
Gottsgaab at Abertham, explained before, the equivalent of 300,000. But
far before all others within our fathers' memory stands the St. George
of Schneeberg, whose silver has been estimated as being equal to two
million Rhenish gulden." A Rhenish gulden was about 6.9 shillings, or,
say, $1.66. However, the ratio value of silver to gold at this period
was about 11.5 to one, or in other words an ounce of silver was worth
about a gulden, so that, for purposes of rough calculation, one might
say that the silver product mentioned in gulden is practically of the
same number of ounces of silver. Moreover, it must be remembered that
the purchasing power of money was vastly greater then.

[10] The following passage occurs in the _Nuetzlich Bergbuechlin_ (Chap.
V.), which is interesting on account of the great similarity to
Agricola's quotation:--"The best position of the stream is when it has a
cliff beside it on the north and level ground on the south, but its
current should be from east to west--that is the most suitable. The next
best after this is from west to east, with the same position of the
rocks as already stated. The third in order is when the stream flows
from north to south with rocks toward the east, but the worst flow of
water for the preparation of gold is from south to north if a rock or
hill rises toward the west." Calbus was probably the author of this
booklet.

[11] Albertus Magnus.




BOOK IV.


The third book has explained the various and manifold varieties of veins
and stringers. This fourth book will deal with mining areas and the
method of delimiting them, and will then pass on to the officials who
are connected with mining affairs[1].

Now the miner, if the vein he has uncovered is to his liking, first of
all goes to the _Bergmeister_ to request to be granted a right to mine,
this official's special function and office being to adjudicate in
respect of the mines. And so to the first man who has discovered the
vein the _Bergmeister_ awards the head meer, and to others the remaining
meers, in the order in which each makes his application. The size of a
meer is measured by fathoms, which for miners are reckoned at six feet
each. The length, in fact, is that of a man's extended arms and hands
measured across his chest; but different peoples assign to it different
lengths, for among the Greeks, who called it an [Greek: orguia], it was
six feet, among the Romans five feet. So this measure which is used by
miners seems to have come down to the Germans in accordance with the
Greek mode of reckoning. A miner's foot approaches very nearly to the
length of a Greek foot, for it exceeds it by only three-quarters of a
Greek digit, but like that of the Romans it is divided into twelve
_unciae_[2].

[Illustration 79a (Square with lengths and area): Shape of a Square
Meer.]

Now square fathoms are reckoned in units of one, two, three, or more
"measures", and a "measure" is seven fathoms each way. Mining meers are
for the most part either square or elongated; in square meers all the
sides are of equal length, therefore the numbers of fathoms on the two
sides multiplied together produce the total in square fathoms. Thus, if
the shape of a "measure" is seven fathoms on every side, this number
multiplied by itself makes forty-nine square fathoms.

[Illustration 79b (Rectangle with lengths and area): Shape of a Long
Meer or Double Measure.]

The sides of a long meer are of equal length, and similarly its ends are
equal; therefore, if the number of fathoms in one of the long sides be
multiplied by the number of fathoms in one of the ends, the total
produced by the multiplication is the total number of square fathoms in
the long meer. For example, the double measure is fourteen fathoms long
and seven broad, which two numbers multiplied together make ninety-eight
square fathoms.

[Illustration 79c (Rectangle with lengths and area): Shape of a Head
Meer.]

Since meers vary in shape according to the different varieties of veins
it is necessary for me to go more into detail concerning them and their
measurements. If the vein is a _vena profunda_, the head meer is
composed of three double measures, therefore it is forty-two fathoms in
length and seven in width, which numbers multiplied together give two
hundred and ninety-four square fathoms, and by these limits the
_Bergmeister_ bounds the owner's rights in a head-meer.

[Illustration 80a (Rectangle with lengths and area): Shape of a Meer.]

The area of every other meer consists of two double measures, on
whichever side of the head meer it lies, or whatever its number in order
may be, that is to say, whether next to the head meer, or second, third,
or any later number. Therefore, it is twenty-eight fathoms long and
seven wide, so multiplying the length by the width we get one hundred
and ninety-six square fathoms, which is the extent of the meer, and by
these boundaries the _Bergmeister_ defines the right of the owner or
company over each mine.

Now we call that part of the vein which is first discovered and mined,
the head-meer, because all the other meers run from it, just as the
nerves from the head. The _Bergmeister_ begins his measurements from it,
and the reason why he apportions a larger area to the head-meer than to
the others, is that he may give a suitable reward to the one who first
found the vein and may encourage others to search for veins. Since meers
often reach to a torrent, or river, or stream, if the last meer cannot
be completed it is called a fraction[3]. If it is the size of a double
measure, the _Bergmeister_ grants the right of mining it to him who
makes the first application, but if it is the size of a single measure
or a little over, he divides it between the nearest meers on either side
of it. It is the custom among miners that the first meer beyond a stream
on that part of the vein on the opposite side is a new head-meer, and
they call it the "opposite,"[4] while the other meers beyond are only
ordinary meers. Formerly every head-meer was composed of three double
measures and one single one, that is, it was forty-nine fathoms long and
seven wide, and so if we multiply these two together we have three
hundred and forty-three square fathoms, which total gives us the area of
an ancient head-meer.

[Illustration 80b (Rectangle with lengths and area): Shape of an ancient
Head-Meer.]

Every ancient meer was formed of a single measure, that is to say, it
was seven fathoms in length and width, and was therefore square. In
memory of which miners even now call the width of every meer which is
located on a _vena profunda_ a "square"[5]. The following was formerly
the usual method of delimiting a vein: as soon as the miner found
metal, he gave information to the _Bergmeister_ and the tithe-gatherer,
who either proceeded personally from the town to the mountains, or sent
thither men of good repute, at least two in number, to inspect the
metal-bearing vein. Thereupon, if they thought it of sufficient
importance to survey, the _Bergmeister_ again having gone forth on an
appointed day, thus questioned him who first found the vein, concerning
the vein and the diggings: "Which is your vein?" "Which digging carried
metal?" Then the discoverer, pointing his finger to his vein and
diggings, indicated them, and next the _Bergmeister_ ordered him to
approach the windlass and place two fingers of his right hand upon his
head, and swear this oath in a clear voice: "I swear by God and all the
Saints, and I call them all to witness, that this is my vein; and
moreover if it is not mine, may neither this my head nor these my hands
henceforth perform their functions." Then the _Bergmeister_, having
started from the centre of the windlass, proceeded to measure the vein
with a cord, and to give the measured portion to the discoverer,--in the
first instance a half and then three full measures; afterward one to the
King or Prince, another to his Consort, a third to the Master of the
Horse, a fourth to the Cup-bearer, a fifth to the Groom of the Chamber,
a sixth to himself. Then, starting from the other side of the windlass,
he proceeded to measure the vein in a similar manner. Thus the
discoverer of the vein obtained the head-meer, that is, seven single
measures; but the King or Ruler, his Consort, the leading dignitaries,
and lastly, the _Bergmeister_, obtained two measures each, or two
ancient meers. This is the reason there are to be found at Freiberg in
Meissen so many shafts with so many intercommunications on a single
vein--which are to a great extent destroyed by age. If, however, the
_Bergmeister_ had already fixed the boundaries of the meers on one side
of the shaft for the benefit of some other discoverer, then for those
dignitaries I have just mentioned, as many meers as he was unable to
award on that side he duplicated on the other. But if on both sides of
the shaft he had already defined the boundaries of meers, he proceeded
to measure out only that part of the vein which remained free, and thus
it sometimes happened that some of those persons I have mentioned
obtained no meer at all. To-day, though that old-established custom is
observed, the method of allotting the vein and granting title has been
changed. As I have explained above, the head-meer consists of three
double measures, and each other meer of two measures, and the
_Bergmeister_ grants one each of the meers to him who makes the first
application. The King or Prince, since all metal is taxed, is himself
content with that, which is usually one-tenth.

Of the width of every meer, whether old or new, one-half lies on the
footwall side of a _vena profunda_ and one half on the hangingwall side.
If the vein descends vertically into the earth, the boundaries similarly
descend vertically; but if the vein inclines, the boundaries likewise
will be inclined. The owner always holds the mining right for the width
of the meer, however far the vein descends into the depth of the
earth.[6] Further, the _Bergmeister_, on application being made to him,
grants to one owner or company a right over not only the head meer, or
another meer, but also the head meer and the next meer or two adjoining
meers. So much for the shape of meers and their dimensions in the case
of a _vena profunda_.

I now come to the case of _venae dilatatae_. The boundaries of the areas
on such veins are not all measured by one method. For in some places
the _Bergmeister_ gives them shapes similar to the shapes of the meers
on _venae profundae_, in which case the head-meer is composed of three
double measures, and the area of every other mine of two measures, as I
have explained more fully above. In this case, however, he measures the
meers with a cord, not only forward and backward from the ends of the
head-meer, as he is wont to do in the case where the owner of a _vena
profunda_ has a meer granted him, but also from the sides. In this way
meers are marked out when a torrent or some other force of Nature has
laid open a _vena dilatata_ in a valley, so that it appears either on
the slope of a mountain or hill or on a plain. Elsewhere the
_Bergmeister_ doubles the width of the head-meer and it is made fourteen
fathoms wide, while the width of each of the other meers remains single,
that is seven fathoms, but the length is not defined by boundaries. In
some places the head-meer consists of three double measures, but has a
width of fourteen fathoms and a length of twenty-one.

[Illustration 86a (Rectangle with lengths): Shape of a Head-Meer.]

[Illustration 86b (Square with lengths): Shape of every other Meer.]

In the same way, every other meer is composed of two measures, doubled
in the same fashion, so that it is fourteen fathoms in width and of the
same length.

Elsewhere every meer, whether a head-meer or other meer, comprises
forty-two fathoms in width and as many in length.

In other places the _Bergmeister_ gives the owner or company all of some
locality defined by rivers or little valleys as boundaries. But the
boundaries of every such area of whatsoever shape it be, descend
vertically into the earth; so the owner of that area has a right over
that part of any _vena dilatata_ which lies beneath the first one, just
as the owner of the meer on a _vena profunda_ has a right over so great
a part of all other _venae profundae_ as lies within the boundaries of
his meer; for just as wherever one _vena profunda_ is found, another is
found not far away, so wherever one _vena dilatata_ is found, others are
found beneath it.

Finally, the _Bergmeister_ divides _vena cumulata_ areas in different
ways, for in some localities the head-meer is composed of three
measures, doubled in such a way that it is fourteen fathoms wide and
twenty-one long; and every other meer consists of two measures doubled,
and is square, that is, fourteen fathoms wide and as many long. In some
places the head-meer is composed of three single measures, and its width
is seven fathoms and its length twenty-one, which two numbers multiplied
together make one hundred and forty-seven square fathoms.

[Illustration 87 (Rectangle with lengths and area): Shape of a
Head-Meer.]

Each other meer consists of one double measure. In some places the
head-meer is given the shape of a double measure, and every other meer
that of a single measure. Lastly, in other places the owner or a company
is given a right over some complete specified locality bounded by little
streams, valleys, or other limits. Furthermore, all meers on _venae
cumulatae_, as in the case of _dilatatae_, descend vertically into the
depths of the earth, and each meer has the boundaries so determined as
to prevent disputes arising between the owners of neighbouring mines.

The boundary marks in use among miners formerly consisted only of
stones, and from this their name was derived, for now the marks of a
boundary are called "boundary stones." To-day a row of posts, made
either of oak or pine, and strengthened at the top with iron rings to
prevent them from being damaged, is fixed beside the boundary stones to
make them more conspicuous. By this method in former times the
boundaries of the fields were marked by stones or posts, not only as
written of in the book "_De Limitibus Agrorum_,"[7] but also as
testified to by the songs of the poets. Such then is the shape of the
meers, varying in accordance with the different kinds of veins.

Now tunnels are of two sorts, one kind having no right of property, the
other kind having some limited right. For when a miner in some
particular locality is unable to open a vein on account of a great
quantity of water, he runs a wide ditch, open at the top and three feet
deep, starting on the slope and running up to the place where the vein
is found. Through it the water flows off, so that the place is made dry
and fit for digging. But if it is not sufficiently dried by this open
ditch, or if a shaft which he has now for the first time begun to sink
is suffering from overmuch water, he goes to the _Bergmeister_ and asks
that official to give him the right for a tunnel. Having obtained leave,
he drives the tunnel, and into its drains all the water is diverted, so
that the place or shaft is made fit for digging. If it is not seven
fathoms from the surface of the earth to the bottom of this kind of
tunnel, the owner possesses no rights except this one: namely, that the
owners of the mines, from whose leases the owner of the tunnel extracts
gold or silver, themselves pay him the sum he expends within their meer
in driving the tunnel through it.

To a depth or height of three and a half fathoms above and below the
mouth of the tunnel, no one is allowed to begin another tunnel. The
reason for this is that this kind of a tunnel is liable to be changed
into the other kind which has a complete right of property, when it
drains the meers to a depth of seven fathoms, or to ten, according as
the old custom in each place acquires the force of law. In such case
this second kind of tunnel has the following right; in the first place,
whatever metal the owner, or company owning it, finds in any meer
through which it is driven, all belongs to the tunnel owner within a
height or depth of one and a quarter fathoms. In the years which are not
long passed, the owner of a tunnel possessed all the metal which a miner
standing at the bottom of the tunnel touched with a bar, whose handle
did not exceed the customary length; but nowadays a certain prescribed
height and width is allowed to the owner of the tunnel, lest the owners
of the mines be damaged, if the length of the bar be longer than usual.
Further, every metal-yielding mine which is drained and supplied with
ventilation by a tunnel, is taxed in the proportion of one-ninth for the
benefit of the owner of the tunnel. But if several tunnels of this kind
are driven through one mining area which is yielding metals, and all
drain it and supply it with ventilation, then of the metal which is dug
out from above the bottom of each tunnel, one-ninth is given to the
owner of that tunnel; of that which is dug out below the bottom of each
tunnel, one-ninth is in each case given to the owner of the tunnel which
follows next in order below. But if the lower tunnel does not yet drain
the shaft of that meer nor supply it with ventilation, then of the metal
which is dug out below the bottom of the higher tunnel, one-ninth part
is given to the owner of such upper tunnel. Moreover, no one tunnel
deprives another of its right to one-ninth part, unless it be a lower
one, from the bottom of which to the bottom of the one above must not be
less than seven or ten fathoms, according as the king or prince has
decreed. Further, of all the money which the owner of the tunnel has
spent on his tunnel while driving it through a meer, the owner of that
meer pays one-fourth part. If he does not do so he is not allowed to
make use of the drains.

Finally, with regard to whatever veins are discovered by the owner at
whose expense the tunnel is driven, the right of which has not been
already awarded to anyone, on the application of such owner the
_Bergmeister_ grants him a right of a head-meer, or of a head-meer
together with the next meer. Ancient custom gives the right for a tunnel
to be driven in any direction for an unlimited length. Further, to-day
he who commences a tunnel is given, on his application, not only the
right over the tunnel, but even the head and sometimes the next meer
also. In former days the owner of the tunnel obtained only so much
ground as an arrow shot from the bow might cover, and he was allowed to
pasture cattle therein. In a case where the shafts of several meers on
some vein could not be worked on account of the great quantity of water,
ancient custom also allowed the _Bergmeister_ to grant the right of a
large meer to anyone who would drive a tunnel. When, however, he had
driven a tunnel as far as the old shafts and had found metal, he used to
return to the _Bergmeister_ and request him to bound and mark off the
extent of his right to a meer. Thereupon, the _Bergmeister_, together
with a certain number of citizens of the town--in whose place Jurors
have now succeeded--used to proceed to the mountain and mark off with
boundary stones a large meer, which consisted of seven double measures,
that is to say, it was ninety-eight fathoms long and seven wide, which
two numbers multiplied together make six hundred and eighty-six square
fathoms.

[Illustration 89 (Rectangle with lengths and area): Large Area.]

But each of these early customs has been changed, and we now employ the
new method.

I have spoken of tunnels; I will now speak about the division of
ownership in mines and tunnels. One owner is allowed to possess and to
work one, two, three, or more whole meers, or similarly one or more
separate tunnels, provided he conforms to the decrees of the laws
relating to metals, and to the orders of the _Bergmeister_. And because
he alone provides the expenditure of money on the mines, if they yield
metal he alone obtains the product from them. But when large and
frequent expenditures are necessary in mining, he to whom the
_Bergmeister_ first gave the right often admits others to share with
him, and they join with him in forming a company, and they each lay out
a part of the expense and share with him the profit or loss of the mine.
But the title of the mines or tunnels remains undivided, although for
the purpose of dividing the expense and profit it may be said each mine
or tunnel is divided into parts[8].

This division is made in various ways. A mine, and the same thing must
be understood with regard to a tunnel, may be divided into two halves,
that is into two similar portions, by which method two owners spend an
equal amount on it and draw an equal profit from it, for each possesses
one half. Sometimes it is divided into four shares, by which compact
four persons can be owners, so that each possesses one-fourth, or also
two persons, so that one possesses three-fourths, and the other only
one-fourth; or three owners, so that the first has two-fourths, and the
second and third one-fourth each. Sometimes it is divided into eight
shares, by which plan there may be eight owners, so that each is
possessor of one-eighth; sometimes there are two owners, so that one has
five-sixths[9] together with one twenty-fourth, and the other
one-eighth; or there may be three owners, in which one has
three-quarters and the second and third each one-eighth; or it may be
divided so that one owner has seven-twelfths, together with one
twenty-fourth, a second owner has one-quarter, and a third owner has
one-eighth; or so that the first has one-half, the second one-third and
one twenty-fourth, and the third one-eighth; or so that the first has
one-half, as before, and the second and third each one-quarter; or so
that the first and second each have one-third and one twenty-fourth, and
the third one-quarter; and in the same way the divisions may be adjusted
in all the other proportions. The different ways of dividing the shares
originate from the different proportions of ownership. Sometimes a mine
is divided into sixteen parts, each of which is a twenty-fourth and a
forty-eighth; or it may be divided into thirty-two parts, each of which
is a forty-eighth and half a seventy-second and a two hundred and
eighty-eighth; or into sixty-four parts of which each share is one
seventy-second and one five hundred and seventy-sixth; or finally, into
one hundred and twenty-eight parts, any one of which is half a
seventy-second and half of one five hundred and seventy-sixth.

Now an iron mine either remains undivided or is divided into two, four,
or occasionally more shares, which depends on the excellence of the
veins. But a lead, bismuth, or tin mine, and likewise one of copper or
even quicksilver, is also divided into eight shares, or into sixteen or
thirty-two, and less commonly into sixty-four. The number of the
divisions of the silver mines at Freiberg in Meissen did not formerly
progress beyond this; but within the memory of our fathers, miners have
divided a silver mine, and similarly the tunnel at Schneeberg, first of
all into one hundred and twenty-eight shares, of which one hundred and
twenty-six are the property of private owners in the mines or tunnels,
one belongs to the State and one to the Church; while in Joachimsthal
only one hundred and twenty-two shares of the mines or tunnels are the
property of private owners, four are proprietary shares, and the State
and Church each have one in the same way. To these there has lately been
added in some places one share for the most needy of the population,
which makes one hundred and twenty-nine shares. It is only the private
owners of mines who pay contributions. A proprietary holder, though he
holds as many as four shares such as I have described, does not pay
contributions, but gratuitiously supplies the owners of the mines with
sufficient wood from his forests for timbering, machinery, buildings,
and smelting; nor do those belonging to the State, Church, and the poor
pay contributions, but the proceeds are used to build or repair public
works and sacred buildings, and to support the most needy with the
profits which they draw from the mines. Furthermore, in our State, the
one hundred and twenty-eighth share has begun to be divided into two,
four, or eight parts, or even into three, six, twelve, or smaller parts.
This is done when one mine is created out of two, for then the owner who
formerly possessed one-half becomes owner of one-fourth; he who
possessed one-fourth, of one-eighth; he who possessed one-third, of
one-sixth; he who possessed one-sixth, of one-twelfth. Since our
countrymen call a mine a _symposium_, that is, a drinking bout, we are
accustomed to call the money which the owners subscribe a _symbolum_, or
a contribution[10]. For, just as those who go to a banquet (_symposium_)
give contributions (_symbola_), so those who purpose making large
profits from mining are accustomed to contribute toward the expenditure.
However, the manager of the mine assesses the contributions of the
owners annually, or for the most part quarterly, and as often he renders
an account of receipts and expenses. At Freiberg in Meissen the old
practice was for the manager to exact a contribution from the owners
every week, and every week to distribute among them the profits of the
mines, but this practice during almost the last fifteen years has been
so far changed that contribution and distribution are made four[11]
times each year. Large or small contributions are imposed according to
the number of workmen which the mine or tunnel requires; as a result,
those who possess many shares provide many contributions. Four times a
year the owners contribute to the cost, and four times during the year
the profits of the mines are distributed among them; these are sometimes
large, sometimes small, according as there is more or less gold or
silver or other metal dug out. Indeed, from the St. George mine in
Schneeberg the miners extracted so much silver in a quarter of a year
that silver cakes, which were worth 1,100 Rhenish guldens, were
distributed to each one hundred and twenty-eighth share. From the
Annaberg mine which is known as the Himmelisch Hoez, they had a dole of
eight hundred thaler; from a mine in Joachimsthal which is named the
Sternen, three hundred thaler; from the head mine at Abertham, which is
called St. Lorentz, two hundred and twenty-five thaler[12]. The more
shares of which any individual is owner the more profits he takes.

I will now explain how the owners may lose or obtain the right over a
mine, or a tunnel, or a share. Formerly, if anyone was able to prove by
witnesses that the owners had failed to send miners for three continuous
shifts[13], the _Bergmeister_ deprived them of their right over the
mine, and gave the right over it to the informer, if he desired it. But
although miners preserve this custom to-day, still mining share owners
who have paid their contributions do not lose their right over their
mines against their will. Formerly, if water which had not been drawn
off from the higher shaft of some mine percolated through a vein or
stringer into the shaft of another mine and impeded their work, then the
owners of the mine which suffered the damage went to the _Bergmeister_
and complained of the loss, and he sent to the shafts two Jurors. If
they found that matters were as claimed, the right over the mine which
caused the injury was given to the owners who suffered the injury. But
this custom in certain places has been changed, for the _Bergmeister_,
if he finds this condition of things proved in the case of two shafts,
orders the owners of the shaft which causes the injury to contribute
part of the expense to the owners of the shaft which receives the
injury; if they fail to do so, he then deprives them of their right over
their mine; on the other hand, if the owners send men to the workings to
dig and draw off the water from the shafts, they keep their right over
their mine. Formerly owners used to obtain a right over any tunnel,
firstly, if in its bottom they made drains and cleansed them of mud and
sand so that the water might flow out without any hindrance, and
restored those drains which had been damaged; secondly, if they provided
shafts or openings to supply the miners with air, and restored those
which had fallen in; and finally, if three miners were employed
continuously in driving the tunnel. But the principal reason for losing
the title to a tunnel was that for a period of eight days no miner was
employed upon it; therefore, when anyone was able to prove by witnesses
that the owners of a tunnel had not done these things, he brought his
accusation before the _Bergmeister_, who, after going out from the town
to the tunnel and inspecting the drains and the ventilating machines and
everything else, and finding the charge to be true, placed the witness
under oath, and asked him: "Whose tunnel is this at the present time?"
The witness would reply: "The King's" or "The Prince's." Thereupon the
_Bergmeister_ gave the right over the tunnel to the first applicant.
This was the severe rule under which the owners at one time lost their
rights over a tunnel; but its severity is now considerably mitigated,
for the owners do not now forthwith lose their right over a tunnel
through not having cleaned out the drains and restored the shafts or
ventilation holes which have suffered damage; but the _Bergmeister_
orders the tunnel manager to do it, and if he does not obey, the
authorities fine the tunnel. Also it is sufficient for one miner to be
engaged in driving the tunnel. Moreover, if the owner of a tunnel sets
boundaries at a fixed spot in the rocks and stops driving the tunnel, he
may obtain a right over it so far as he has gone, provided the drains
are cleaned out and ventilation holes are kept in repair. But any other
owner is allowed to start from the established mark and drive the tunnel
further, if he pays the former owners of the tunnel as much money every
three months as the _Bergmeister_ decides ought to be paid.

There remain for discussion, the shares in the mines and tunnels.
Formerly if anybody conveyed these shares to anyone else, and the latter
had once paid his contribution, the seller[14] was bound to stand by his
bargain, and this custom to-day has the force of law. But if the seller
denied that the contribution had been paid, while the buyer of the
shares declared that he could prove by witnesses that he had paid his
contribution to the other proprietors, and a case arose for trial, then
the evidence of the other proprietors carried more weight than the oath
of the seller. To-day the buyer of the shares proves that he has paid
his contribution by a document which the mine or tunnel manager always
gives each one; if the buyer has contributed no money there is no
obligation on the seller to keep his bargain. Formerly, as I have said
above, the proprietors used to contribute money weekly, but now
contributions are paid four times each year. To-day, if for the space of
a month anyone does not take proceedings against the seller of the
shares for the contribution, the right of taking proceedings is lost.
But when the Clerk has already entered on the register the shares which
had been conveyed or bought, none of the owners loses his right over the
share unless the money is not contributed which the manager of the mine
or tunnel has demanded from the owner or his agent. Formerly, if on the
application of the manager the owner or his agent did not pay, the
matter was referred to the _Bergmeister_, who ordered the owner or his
agent to make his contribution; then if he failed to contribute for
three successive weeks, the _Bergmeister_ gave the right to his shares
to the first applicant. To-day this custom is unchanged, for if owners
fail for the space of a month to pay the contributions which the manager
of the mine has imposed on them, on a stated day their names are
proclaimed aloud and struck off the list of owners, in the presence of
the _Bergmeister_, the Jurors, the Mining Clerk, and the Share Clerk,
and each of such shares is entered on the proscribed list. If, however,
on the third, or at latest the fourth day, they pay their contributions
to the manager of the mine or tunnel, and pay the money which is due
from them to the Share Clerk, he removes their shares from the
proscribed list. They are not thereupon restored to their former
position unless the other owners consent; in which respect the custom
now in use differs from the old practice, for to-day if the owners of
shares constituting anything over half the mine consent to the
restoration of those who have been proscribed, the others are obliged to
consent whether they wish to or not. Formerly, unless such restoration
had been sanctioned by the approval of the owners of one hundred shares,
those who had been proscribed were not restored to their former
position.

The procedure in suits relating to shares was formerly as follows: he
who instituted a suit and took legal proceedings against another in
respect of the shares, used to make a formal charge against the accused
possessor before the _Bergmeister_. This was done either at his house or
in some public place or at the mines, once each day for three days if
the shares belonged to an old mine, and three times in eight days if
they belonged to a head-meer. But if he could not find the possessor of
the shares in these places, it was valid and effectual to make the
accusation against him at the house of the _Bergmeister_. When, however,
he made the charge for the third time, he used to bring with him a
notary, whom the _Bergmeister_ would interrogate: "Have I earned the
fee?" and who would respond: "You have earned it"; thereupon the
_Bergmeister_ would give the right over the shares to him who made the
accusation, and the accuser in turn would pay down the customary fee to
the _Bergmeister_. After these proceedings, if the man whom the
_Bergmeister_ had deprived of his shares dwelt in the city, one of the
proprietors of the mine or of the head-mine was sent to him to acquaint
him with the facts, but if he dwelt elsewhere proclamation was made in
some public place, or at the mine, openly and in a loud voice in the
hearing of numbers of miners. Nowadays a date is defined for the one who
is answerable for the debt of shares or money, and information is given
the accused by an official if he is near at hand, or if he is absent, a
letter is sent him; nor is the right over his shares taken from anyone
for the space of one and a half months. So much for these matters.

Now, before I deal with the methods which must be employed in working, I
will speak of the duties of the Mining Prefect, the _Bergmeister_, the
Jurors, the Mining Clerk, the Share Clerk, the manager of the mine or
tunnel, the foreman of the mine or tunnel, and the workmen.

To the Mining Prefect, whom the King or Prince appoints as his deputy,
all men of all races, ages, and rank, give obedience and submission. He
governs and regulates everything at his discretion, ordering those
things which are useful and advantageous in mining operations, and
prohibiting those which are to the contrary. He levies penalties and
punishes offenders; he arranges disputes which the _Bergmeister_ has
been unable to settle, and if even he cannot arrange them, he allows the
owners who are at variance over some point to proceed to litigation; he
even lays down the law, gives orders as a magistrate, or bids them
leave their rights in abeyance, and he determines the pay of persons who
hold any post or office. He is present in person when the mine managers
present their quarterly accounts of profits and expenses, and generally
represents the King or Prince and upholds his dignity. The Athenians in
this way set Thucydides, the famous historian, over the mines of
Thasos[15].

Next in power to the Mining Prefect comes the _Bergmeister_, since he
has jurisdiction over all who are connected with mines, with a few
exceptions, which are the Tithe Gatherer, the Cashier, the Silver
Refiner, the Master of the Mint, and the Coiners themselves. Fraudulent,
negligent, or dissolute men he either throws into prison, or deprives of
promotion, or fines; of these fines, part is given as a tribute to those
in power. When the mine owners have a dispute over boundaries he
arbitrates it; or if he cannot settle the dispute, he pronounces
judgment jointly with the Jurors; from them, however, an appeal lies to
the Mining Prefect. He transcribes his decrees in a book and sets up the
records in public. It is also his duty to grant the right over the mines
to those who apply, and to confirm their rights; he also must measure
the mines, and fix their boundaries, and see that the mine workings are
not allowed to become dangerous. Some of these duties he observes on
fixed days; for on Wednesday in the presence of the Jurors he confirms
the rights over the mines which he has granted, settles disputes about
boundaries, and pronounces judgments. On Mondays, Tuesdays, Thursdays,
and Fridays, he rides up to the mines, and dismounting at some of them
explains what is required to be done, or considers the boundaries which
are under controversy. On Saturday all the mine managers and mine
foremen render an account of the money which they have spent on the
mines during the preceding week, and the Mining Clerk transcribes this
account into the register of expenses. Formerly, for one Principality
there was one _Bergmeister_, who used to create all the judges and
exercise jurisdiction and control over them; for every mine had its own
judge, just as to-day each locality has a _Bergmeister_ in his place,
the name alone being changed. To this ancient _Bergmeister_, who used to
dwell at Freiberg in Meissen, disputes were referred; hence right up to
the present time the one at Freiberg still has the power of pronouncing
judgment when mine owners who are engaged in disputes among themselves
appeal to him. The old _Bergmeister_ could try everything which was
presented to him in any mine whatsoever; whereas the judge could only
try the things which were done in his own district, in the same way that
every modern _Bergmeister_ can.

To each _Bergmeister_ is attached a clerk, who writes out a schedule
signifying to the applicant for a right over a mine, the day and hour on
which the right is granted, the name of the applicant, and the location
of the mine. He also affixes at the entrance to the mine, quarterly, at
the appointed time, a sheet of paper on which is shown how much
contribution must be paid to the manager of the mine. These notices are
prepared jointly with the Mining Clerk, and in common they receive the
fee rendered by the foremen of the separate mines.

I now come to the Jurors, who are men experienced in mining matters and
of good repute. Their number is greater or less as there are few or more
mines; thus if there are ten mines there will be five pairs of Jurors,
like a _decemviral college_[16]. Into however many divisions the total
number of mines has been divided, so many divisions has the body of
Jurors; each pair of Jurors usually visits some of the mines whose
administration is under their supervision on every day that workmen are
employed; it is usually so arranged that they visit all the mines in the
space of fourteen days. They inspect and consider all details, and
deliberate and consult with the mine foreman on matters relating to the
underground workings, machinery, timbering, and everything else. They
also jointly with the mine foreman from time to time make the price per
fathom to the workmen for mining the ore, fixing it at a high or low
price, according to whether the rock is hard or soft; if, however, the
contractors find that an unforeseen and unexpected hardness occurs, and
for that reason have difficulty and delay in carrying out their work,
the Jurors allow them something in excess of the price fixed; while if
there is a softness by reason of water, and the work is done more easily
and quickly, they deduct something from the price. Further, if the
Jurors discover manifest negligence or fraud on the part of any foreman
or workman, they first admonish or reprimand him as to his duties and
obligations, and if he does not become more diligent and improve, the
matter is reported to the _Bergmeister_, who by right of his authority
deprives such persons of their functions and office, or, if they have
committed a crime, throws them into prison. Lastly, because the Jurors
have been given to the _Bergmeister_ as councillors and advisors, in
their absence he does not confirm the right over any mine, nor measure
the mines, nor fix their boundaries, nor settle disputes about
boundaries, nor pronounce judgment, nor, finally, does he without them
listen to any account of profits and expenditure.

Now the Mining Clerk enters each mine in his books, the new mines in one
book, the old mines which have been re-opened in another. This is done
in the following way: first is written the name of the man who has
applied for the right over the mine, then the day and hour on which he
made his application, then the vein and the locality in which it is
situated, next the conditions on which the right has been given, and
lastly, the day on which the _Bergmeister_ confirmed it. A document
containing all these particulars is also given to the person whose right
over a mine has been confirmed. The Mining Clerk also sets down in
another book the names of the owners of each mine over which the right
has been confirmed; in another any intermission of work permitted to any
person for certain reasons by the _Bergmeister_; in another the money
which one mine supplies to another for drawing off water or making
machinery; and in another the decisions of the _Bergmeister_ and the
Jurors, and the disputes settled by them as honorary arbitrators. All
these matters he enters in the books on Wednesday of every week; if
holidays fall on that day he does it on the following Thursday. Every
Saturday he enters in another book the total expenses of the preceding
week, the account of which the mine manager has rendered; but the total
quarterly expenses of each mine manager, he enters in a special book at
his own convenience. He enters similarly in another book a list of
owners who have been proscribed. Lastly, that no one may be able to
bring a charge of falsification against him, all these books are
enclosed in a chest with two locks, the key of one of which is kept by
the Mining Clerk, and of the other by the _Bergmeister_.

The Share Clerk enters in a book the owners of each mine whom the first
finder of the vein names to him, and from time to time replaces the
names of the sellers with those of the buyers of the shares. It
sometimes happens that twenty or more owners come into the possession of
some particular share. Unless, however, the seller is present, or has
sent a letter to the Mining Clerk with his seal, or better still with
the seal of the Mayor of the town where he dwells, his name is not
replaced by that of anyone else; for if the Share Clerk is not
sufficiently cautious, the law requires him to restore the late owner
wholly to his former position. He writes out a fresh document, and in
this way gives proof of possession. Four times a year, when the accounts
of the quarterly expenditure are rendered, he names the new proprietors
to the manager of each mine, that the manager may know from whom he
should demand contributions and among whom to distribute the profits of
the mines. For this work the mine manager pays the Clerk a fixed fee.

I will now speak of the duties of the mine manager. In the case of the
owners of every mine which is not yielding metal, the manager announces
to the proprietors their contributions in a document which is affixed to
the doors of the town hall, such contributions being large or small,
according as the _Bergmeister_ and two Jurors determine. If anyone fails
to pay these contributions for the space of a month, the manager removes
their names from the list of owners, and makes their shares the common
property of the other proprietors. And so, whomsoever the mine manager
names as not having paid his contribution, that same man the Mining
Clerk designates in writing, and so also does the Share Clerk. Of the
contribution, the mine manager applies part to the payment of the
foreman and workmen, and lays by a part to purchase at the lowest price
the necessary things for the mine, such as iron tools, nails, firewood,
planks, buckets, drawing-ropes, or grease. But in the case of a mine
which is yielding metal, the Tithe-gatherer pays the mine manager week
by week as much money as suffices to discharge the workmen's wages and
to provide the necessary implements for mining. The mine manager of each
mine also, in the presence of its foreman, on Saturday in each week
renders an account of his expenses to the _Bergmeister_ and the Jurors,
he renders an account of his receipts, whether the money has been
contributed by the owners or taken from the Tithe-gatherer; and of his
quarterly expenditure in the same way to them and to the Mining Prefect
and to the Mining Clerk, four times a year at the appointed time; for
just as there are four seasons of the year, namely, Spring, Summer,
Autumn, and Winter, so there are fourfold accounts of profits and
expenses. In the beginning of the first month of each quarter an account
is rendered of the money which the manager has spent on the mine during
the previous quarter, then of the profit which he has taken from it
during the same period; for example, the account which is rendered at
the beginning of spring is an account of all the profits and expenses of
each separate week of winter, which have been entered by the Mining
Clerk in the book of accounts. If the manager has spent the money of the
proprietors advantageously in the mine and has faithfully looked after
it, everyone praises him as a diligent and honest man; if through
ignorance in these matters he has caused loss, he is generally deprived
of his office; if by his carelessness and negligence the owners have
suffered loss, the _Bergmeister_ compels him to make good the loss; and
finally, if he has been guilty of fraud or theft, he is punished with
fine, prison, or death. Further, it is the business of the manager to
see that the foreman of the mine is present at the beginning and end of
the shifts, that he digs the ore in an advantageous manner, and makes
the required timbering, machines, and drains. The manager also makes the
deductions from the pay of the workmen whom the foreman has noted as
negligent. Next, if the mine is rich in metal, the manager must see that
its ore-house is closed on those days on which no work is performed; and
if it is a rich vein of gold or silver, he sees that the miners promptly
transfer the output from the shaft or tunnel into a chest or into the
strong room next to the house where the foreman dwells, that no
opportunity for theft may be given to dishonest persons. This duty he
shares in common with the foreman, but the one which follows is
peculiarly his own. When ore is smelted he is present in person, and
watches that the smelting is performed carefully and advantageously. If
from it gold or silver is melted out, when it is melted in the
cupellation furnace he enters the weight of it in his books and carries
it to the Tithe-gatherer, who similarly writes a note of its weight in
his books; it is then conveyed to the refiner. When it has been brought
back, both the Tithe-gatherer and manager again enter its weight in
their books. Why again? Because he looks after the goods of the owners
just as if they were his own. Now the laws which relate to mining permit
a manager to have charge of more than one mine, but in the case of mines
yielding gold or silver, to have charge of only two. If, however,
several mines following the head-mine begin to produce metal, he remains
in charge of these others until he is freed from the duty of looking
after them by the _Bergmeister_. Last of all, the manager, the
_Bergmeister_, and the two Jurors, in agreement with the owners, settle
the remuneration for the labourers. Enough of the duties and occupation
of the manager.

I will now leave the manager, and discuss him who controls the workmen
of the mine, who is therefore called the foreman, although some call him
the watchman. It is he who distributes the work among the labourers, and
sees diligently that each faithfully and usefully performs his duties.
He also discharges workmen on account of incompetence, or negligence,
and supplies others in their places if the two Jurors and manager give
their consent. He must be skilful in working wood, that he may timber
shafts, place posts, and make underground structures capable of
supporting an undermined mountain, lest the rocks from the hangingwall
of the veins, not being supported, become detached from the mass of the
mountain and overwhelm the workmen with destruction. He must be able to
make and lay out the drains in the tunnels, into which the water from
the veins, stringers, and seams in the rocks may collect, that it may be
properly guided and can flow away. Further, he must be able to recognize
veins and stringers, so as to sink shafts to the best advantage, and
must be able to discern one kind of material which is mined from
another, or to train his subordinates that they may separate the
materials correctly. He must also be well acquainted with all methods of
washing, so as to teach the washers how the metalliferous earth or sand
is washed. He supplies the miners with iron tools when they are about to
start to work in the mines, and apportions a certain weight of oil for
their lamps, and trains them to dig to the best advantage, and sees that
they work faithfully. When their shift is finished, he takes back the
oil which has been left. On account of his numerous and important duties
and labours, only one mine is entrusted to one foreman, nay, rather
sometimes two or three foremen are set over one mine.

Since I have mentioned the shifts, I will briefly explain how these are
carried on. The twenty-four hours of a day and night are divided into
three shifts, and each shift consists of seven hours. The three
remaining hours are intermediate between the shifts, and form an
interval during which the workmen enter and leave the mines. The first
shift begins at the fourth hour in the morning and lasts till the
eleventh hour; the second begins at the twelfth and is finished at the
seventh; these two are day shifts in the morning and afternoon. The
third is the night shift, and commences at the eighth hour in the
evening and finishes at the third in the morning. The _Bergmeister_ does
not allow this third shift to be imposed upon the workmen unless
necessity demands it. In that case, whether they draw water from the
shafts or mine the ore, they keep their vigil by the night lamps, and to
prevent themselves falling asleep from the late hours or from fatigue,
they lighten their long and arduous labours by singing, which is neither
wholly untrained nor unpleasing. In some places one miner is not allowed
to undertake two shifts in succession, because it often happens that he
either falls asleep in the mine, overcome by exhaustion from too much
labour, or arrives too late for his shift, or leaves sooner than he
ought. Elsewhere he is allowed to do so, because he cannot subsist on
the pay of one shift, especially if provisions grow dearer. The
_Bergmeister_ does not, however, forbid an extraordinary shift when he
concedes only one ordinary shift. When it is time to go to work the
sound of a great bell, which the foreigners call a "campana," gives the
workmen warning, and when this is heard they run hither and thither
through the streets toward the mines. Similarly, the same sound of the
bell warns the foreman that a shift has just been finished; therefore as
soon as he hears it, he stamps on the woodwork of the shaft and signals
the workmen to come out. Thereupon, the nearest as soon as they hear the
signal, strike the rocks with their hammers, and the sound reaches those
who are furthest away. Moreover, the lamps show that the shift has come
to an end when the oil becomes almost consumed and fails them. The
labourers do not work on Saturdays, but buy those things which are
necessary to life, nor do they usually work on Sundays or annual
festivals, but on these occasions devote the shift to holy things.
However, the workmen do not rest and do nothing if necessity demands
their labour; for sometimes a rush of water compels them to work,
sometimes an impending fall, sometimes something else, and at such times
it is not considered irreligious to work on holidays. Moreover, all
workmen of this class are strong and used to toil from birth.

The chief kinds of workmen are miners, shovellers, windlass men,
carriers, sorters, washers, and smelters, as to whose duties I will
speak in the following books, in their proper place. At present it is
enough to add this one fact, that if the workmen have been reported by
the foreman for negligence, the _Bergmeister_, or even the foreman
himself, jointly with the manager, dismisses them from their work on
Saturday, or deprives them of part of their pay; or if for fraud, throws
them into prison. However, the owners of works in which the metals are
smelted, and the master of the smelter, look after their own men. As to
the government and duties of miners, I have now said enough; I will
explain them more fully in another work entitled _De Jure et Legibus
Metallicis_[17].

     END OF BOOK IV.


FOOTNOTES:

[1] The nomenclature in this chapter has given unusual difficulty,
because the organisation of mines, either past or present, in
English-speaking countries provides no exact equivalents for many of
these offices and for many of the legal terms. The Latin terms in the
text were, of course, coined by the author, and have no historical basis
to warrant their adoption, while the introduction of the original German
terms is open to much objection, as they are not only largely obsolete,
but also in the main would convey no meaning to the majority of readers.
We have, therefore, reached a series of compromises, and in the main
give the nearest English equivalent. Of much interest in this connection
is a curious exotic survival in mining law to be found in the High Peak
of Derbyshire. We believe (see note on p. 85) that the law of this
district was of Saxon importation, for in it are not only many terms of
German origin, but the character of the law is foreign to the older
English districts and shows its near kinship to that of Saxony. It is
therefore of interest in connection with the nomenclature to be adopted
in this book, as it furnishes about the only English precedents in many
cases. The head of the administration in the Peak was the Steward, who
was the chief judicial officer, with functions somewhat similar to the
_Berghauptmann_. However, the term Steward has come to have so much less
significance that we have adopted a literal rendering of the Latin.
Under the Steward was the Barmaster, Barghmaster, or Barmar, as he was
variously called, and his duties were similar to those of the
_Bergmeister_. The English term would seem to be a corruption of the
German, and as the latter has come to be so well understood by the
English-speaking mining class, we have in this case adopted the German.
The Barmaster acted always by the consent and with the approval of a
jury of from 12 to 24 members. In this instance the English had
functions much like a modern jury, while the _Geschwornen_ of Saxony had
much more widely extended powers. The German _Geschwornen_ were in the
main Inspectors; despite this, however, we have not felt justified in
adopting any other than the literal English for the Latin and German
terms. We have vacillated a great deal over the term _Praefectus
Fodinae_, the German _Steiger_ having, like the Cornish "Captain," in
these days degenerated into a foreman, whereas the duties as described
were not only those of the modern Superintendent or Manager, but also
those of Treasurer of the Company, for he made the calls on shares and
paid the dividends. The term Purser has been used for centuries in
English mining for the Accountant or Cashier, but his functions were
limited to paying dividends, wages, etc., therefore we have considered
it better not to adopt the latter term, and have compromised upon the
term Superintendent or Manager, although it has a distinctly modern
flavor. The word for _area_ has also caused much hesitation, and the
"meer" has finally been adopted with some doubt. The title described by
Agricola has a very close equivalent in the meer of old Derbyshire. As
will be seen later, the mines of Saxony were Regal property, and were
held subject to two essential conditions, _i.e._, payment of a tithe,
and continuous operation. This form of title thus approximates more
closely to the "lease" of Australia than to the old Cornish _sett_, or
the American _claim_. The _fundgrube_ of Saxony and Agricola's
equivalent, the _area capitis_--head lease--we have rendered literally
as "head meer," although in some ways "founders' meer" might be better,
for, in Derbyshire, this was called the "finder's" or founder's meer,
and was awarded under similar circumstances. It has also an analogy in
Australian law in the "reward" leases. The term "measure" has the merit
of being a literal rendering of the Latin, and also of being the
identical term in the same use in the High Peak. The following table of
the principal terms gives the originals of the Latin text, their German
equivalents according in the Glossary and other sources, and those
adopted in the translation:--

     AGRICOLA.                GERMAN GLOSSARY.          TERM ADOPTED.
  _Praefectus Metallorum_    _Bergamptmann_             Mining Prefect.
  _Magister Metallicorum_    _Bergmeister_              Bergmeister.
  _Scriba Magister           _Bergmeister's schreiber_  Bergmeister's clerk.
     Metallicorum_
  _Jurati_                   _Geschwornen_              Jurates or Jurors.
  _Publicus Signator_        _Gemeiner sigler_          Notary.
  _Decumanus_                _Zehender_                 Tithe gatherer.
  _Distributor_              _Aussteiler_               Cashier.
  _Scriba partium_           _Gegenschreiber_           Share clerk.
  _Scriba fodinarum_         _Bergschreiber_            Mining clerk.
  _Praefectus fodinae_     } _Steiger_                { Manager of the Mine.
  _Praefectus cuniculi_    }                          { Manager of the Tunnel.
  _Praeses fodinae_        } _Schichtmeister_         { Foreman of the Mine.
  _Praeses cuniculi_       }                          { Foreman of the Tunnel.
  _Fossores_                _Berghauer_                 Miners or diggers.
  _Ingestores_              _Berganschlagen_            Shovellers.
  _Vectarii_                _Hespeler_                  Lever workers
                                                          (windlass men).
  _Discretores_             _Ertzpucher_                Sorters.
  _Lotores_                 _Wescher und seiffner_      Washers, buddlers,
                                                          sifters, etc.
  _Excoctores_              _Schmeltzer_                Smelters.
  _Purgator Argenti_        _Silber brenner_            Silver refiner.
  _Magister Monetariorum_   _Muentzmeister_              Master of the Mint.
  _Monetarius_              _Muentzer_                   Coiner.
  _Area fodinarum_          _Masse_                     Meer.
  _Area Capitis Fodinarum_  _Fundgrube_                 Head meer.
  _Demensum_                _Lehen_                     Measure.

[2] The following are the equivalents of the measures mentioned in this
book. It is not always certain which "foot" or "fathom" Agricola
actually had in mind although they were probably the German.

  Greek--
          _Dactylos_    =   .76 inches
     16 = _Pous_        = 12.13 inches
      6 = _Orguia_      = 72.81 inches.

  Roman--
          _Uncia_       =   .97   "
     12 = _Pes_         = 11.6    "
      5 = _Passus_      = 58.1    "

  German--
          _Zoll_        =   .93   "
     12 = _Werckschuh_  = 11.24   "
      6 = _Lachter_     = 67.5    "

  English--
          Inch          =  1.0    "
     12 =  Foot         = 12.00   "
      6 =  Fathom       = 72.0    "

The discrepancies are due to variations in authorities and to decimals
dropped. The _werckschuh_ taken is the Chemnitz foot deduced from
Agricola's statement in his _De Mensuris et Ponderibus_, Basel, 1533, p.
29. For further notes see Appendix C.

[3] _Subcisivum_--"Remainder." German Glossary, _Ueberschar_. The term
used in Mendip and Derbyshire was _primgap_ or _primegap_. It did not,
however, in this case belong to adjacent mines, but to the landlord.

[4] _Adversum_. Glossary, _gegendrumb_. The _Bergwerk Lexicon_,
Chemnitz, 1743, gives _gegendrom_ or _gegentramm_, and defines it as the
_masse_ or lease next beyond a stream.

[5] _Quadratum_. Glossary, _vierung_. The _vierung_ in old Saxon title
meant a definite zone on either side of the vein, 3-1/2 _lachter_
(_lachter_ = 5 ft. 7.5 inches) into the hangingwall and the same into
the footwall, the length of one _vierung_ being 7 _lachter_ along the
strike. It must be borne in mind that the form of rights here referred
to entitled the miner to follow his vein, carrying the side line with
him in depth the same distance from the vein, in much the same way as
with the Apex Law of the United States. From this definition as given in
the _Bergwerk Lexicon_, p. 585, it would appear that the vein itself was
not included in the measurements, but that they started from the walls.

[6] HISTORICAL NOTE ON THE DEVELOPMENT OF MINING LAW.--There is no
branch of the law of property, of which the development is more
interesting and illuminating from a social point of view than that
relating to minerals. Unlike the land, the minerals have ever been
regarded as a sort of fortuitous property, for the title of which there
have been four principal claimants--that is, the Overlord, as
represented by the King, Prince, Bishop, or what not; the Community or
the State, as distinguished from the Ruler; the Landowner; and the Mine
Operator, to which class belongs the Discoverer. The one of these that
possessed the dominant right reflects vividly the social state and
sentiment of the period. The Divine Right of Kings; the measure of
freedom of their subjects; the tyranny of the land-owning class; the
rights of the Community as opposed to its individual members; the rise
of individualism; and finally, the modern return to more communal view,
have all been reflected promptly in the mineral title. Of these parties
the claims of the Overlord have been limited only by the resistance of
his subjects; those of the State limited by the landlord; those of the
landlord by the Sovereign or by the State; while the miner, ever in a
minority in influence as well as in numbers, has been buffeted from
pillar to post, his only protection being the fact that all other
parties depended upon his exertion and skill.

The conception as to which of these classes had a right in the title
have been by no means the same in different places at the same time, and
in all it varies with different periods; but the whole range of
legislation indicates the encroachment of one factor in the community
over another, so that their relative rights have been the cause of
never-ending contention, ever since a record of civil and economic
contentions began. In modern times, practically over the whole world,
the State has in effect taken the rights from the Overlord, but his
claims did not cease until his claims over the bodies of his subjects
also ceased. However, he still remains in many places with his picture
on the coinage. The Landlord has passed through many vicissitudes; his
complete right to minerals was practically never admitted until the
doctrine of _laissez-faire_ had become a matter of faith, and this just
in time to vest him with most of the coal and iron deposits in the
world; this, no doubt, being also partially due to the little regard in
which such deposits were generally held at that time, and therefore to
the little opposition to his ever-ready pretentions. Their numbers,
however, and their prominence in the support of the political powers _de
jure_ have usually obtained them some recognition. In the rise of
individualism, the apogee of the _laissez-faire_ fetish came about the
time of the foundation of the United States, and hence the relaxation in
the claims of the State in that country and the corresponding position
attained by the landlord and miner. The discoverer and the
operator--that is, the miner himself--has, however, had to be reckoned
with by all three of the other claimants, because they have almost
universally sought to escape the risks of mining, to obtain the most
skilful operation, and to stimulate the productivity of the mines;
thereupon the miner has secured at least partial consideration. This
stands out in all times and all places, and while the miner has had to
take the risks of his fortuitous calling, the Overlord, State, or
Landlord have all made for complacent safety by demanding some kind of a
tithe on his exertions. Moreover, there has often been a low cunning
displayed by these powers in giving something extra to the first
discoverer. In these relations of the powers to the mine operator, from
the very first we find definite records of the imposition of certain
conditions with extraordinary persistence--so fixed a notion that even
the United States did not quite escape it. This condition was, no doubt,
designed as a stimulus to productive activity, and was the requirement
that the miner should continuously employ himself digging in the piece
of ground allotted to him. The Greeks, Romans, Mediaeval Germans, old and
modern Englishmen, modern Australians, all require the miner to keep
continuously labouring at his mines, or lose his title. The American, as
his inauguration of government happened when things were easier for
individuals, allows him a vacation of 11 months in the year for a few
years, and finally a holiday altogether. There are other points where
the Overlord, the State, or the Landlord have always considered that
they had a right to interfere, principally as to the way the miner does
his work, lest he should miss, or cause to be missed, some of the
mineral; so he has usually been under pains and penalties as to his
methods--these quite apart from the very proper protection to human
life, which is purely a modern invention, largely of the miner himself.
Somebody has had to keep peace and settle disputes among the usually
turbulent miners (for what other sort of operators would undertake the
hazards and handicaps?), and therefore special officials and codes, or
Courts, for his benefit are of the oldest and most persistent of
institutions.

Between the Overlord and the Landowner the fundamental conflict of view
as to their respective rights has found its interpretation in the form
of the mineral title. The Overlord claimed the metals as distinguished
from the land, while the landowner claimed all beneath his soil.
Therefore, we find two forms of title--that in which the miner could
follow the ore regardless of the surface (the "apex" conception), and
that in which the boundaries were vertical from the land surface. Lest
the Americans think that the Apex Law was a sin original to themselves,
we may mention that it was made use of in Europe a few centuries before
Agricola, who will be found to set it out with great precision.

From these points of view, more philosophical than legal, we present a
few notes on various ancient laws of mines, though space forbids a
discussion of a tithe of the amount it deserves at some experienced
hand.

Of the Ancient Egyptian, Lydian, Assyrian, Persian, Indian, and Chinese
laws as to mines we have no record, but they were of great simplicity,
for the bodies as well as the property of subjects were at the abject
disposition of the Overlord. We are informed on countless occasions of
Emperors, Kings, and Princes of various degree among these races, owning
and operating mines with convicts, soldiers, or other slaves, so we may
take it for certain that continuous labour was enforced, and that the
boundaries, inspection, and landlords did not cause much anxiety.
However, herein lies the root of regalian right.

Our first glimpse of a serious right of the subject to mines is among
some of the Greek States, as could be expected from their form of
government. With republican ideals, a rich mining district at Mount
Laurion, an enterprising and contentious people, it would be surprising
indeed if Athenian Literature was void on the subject. While we know
that the active operation of these mines extended over some 500 years,
from 700 to 200 B.C., the period of most literary reference was from 400
to 300 B.C. Our information on the subject is from two of Demosthenes'
orations--one against Pantaenetus, the other against Phaenippus--the
first mining lawsuit in which the address of counsel is extant. There is
also available some information in Xenophon's Essay upon the Revenues,
Aristotle's Constitution of Athens, Lycurgus' prosecution of Diphilos,
the Tablets of the Poletae, and many incidental references and
inscriptions of minor order. The minerals were the property of the
State, a conception apparently inherited from the older civilizations.
Leases for exploitation were granted to individuals for terms of three
to ten years, depending upon whether the mines had been previously
worked, thus a special advantage was conferred upon the pioneer. The
leases did not carry surface rights, but the boundaries at Mt. Laurion
were vertical, as necessarily must be the case everywhere in horizontal
deposits. What they were elsewhere we do not know. The landlord
apparently got nothing. The miner must continuously operate his mine,
and was required to pay a large tribute to the State, either in the
initial purchase of his lease or in annual rent. There were elaborate
regulations as to interference and encroachment, and proper support of
the workings. Diphilos was condemned to death and his fortune
confiscated for robbing pillars. The mines were worked with slaves.

The Romans were most intensive miners and searchers after metallic
wealth already mined. The latter was obviously the objective of most
Roman conquest, and those nations rich in these commodities, at that
time necessarily possessed their own mines. Thus a map showing the
extensions of Empire coincides in an extraordinary manner with the metal
distribution of Europe, Asia, and North Africa. Further, the great
indentations into the periphery of the Imperial map, though many were
rich from an agricultural point of view, had no lure to the Roman
because they had no mineral wealth. On the Roman law of mines the
student is faced with many perplexities. With the conquest of the older
States, the plunderers took over the mines and worked them, either by
leases from the State to public companies or to individuals; or even in
some cases worked them directly by the State. There was thus maintained
the concept of State ownership of the minerals which, although
apparently never very specifically defined, yet formed a basis of
support to the contention of regalian rights in Europe later on.
Parallel with this system, mines were discovered and worked by
individuals under tithe to the State, and in Pliny (XXXIV, 49) there is
reference to the miners in Britain limiting their own output. Individual
mining appears to have increased with any relaxation of central
authority, as for instance under Augustus. It appears, as a rule, that
the mines were held on terminable leases, and that the State did at
times resume them; the labour was mostly slaves. As to the detailed
conditions under which the mine operator held his title, we know less
than of the Greeks--in fact, practically nothing other than that he paid
a tithe. The Romans maintained in each mining district an official--the
_Procurator Metallorum_--who not only had general charge of the leasing
of the mines on behalf of the State, but was usually the magistrate of
the district. A bronze tablet found near Aljustrel, in Portugal, in
1876, generally known as the Aljustrel Tablet, appears to be the third
of a series setting out the regulations of the mining district. It
refers mostly to the regulation of public auctions, the baths, barbers,
and tradesmen; but one clause (VII.) is devoted to the regulation of
those who work dumps of scoria, etc., and provides for payment to the
administrator of the mines of a _capitation_ on the slaves employed. It
does not, however, so far as we can determine, throw any light upon the
actual regulations for working the mines. (Those interested will find
ample detail in Jacques Flach, "_La Table de Bronze d'Aljustrel:
Nouvelle Revue Historique de Droit Francais et Etranger_," 1878, p. 655;
_Estacio da Veiga, Memorias da Acad. Real das Ciencias de Lisbon, Nova
Scrie, Tome V, Part II_, Lisbon, 1882.) Despite the systematic law of
property evolved by the Romans, the codes contain but small reference to
mines, and this in itself is indirect evidence of the concept that they
were the property of the State. Any general freedom of the metals would
have given rise to a more extensive body of law. There are, of course,
the well-known sections in the Justinian and Theodosian Codes, but the
former in the main bears on the collection of the tithe and the
stimulation of mining by ordering migrant miners to return to their own
hearths. There is also some intangible prohibition of mining near
edifices. There is in the Theodosian code evident extension of
individual right to mine or quarry, and this "freeing" of the mines was
later considerably extended. The Empire was, however, then on the
decline; and no doubt it was hoped to stimulate the taxable commodities.
There is nothing very tangible as to the position of the landlord with
regard to minerals found on his property; the metals were probably of
insufficient frequency on the land of Italian landlords to matter much,
and the attitude toward subject races was not usually such as to require
an extensive body of law.

In the chaos of the Middle Ages, Europe was governed by hundreds of
potentates, great and small, who were unanimous on one point, and this
that the minerals were their property. In the bickerings among
themselves, the stronger did not hesitate to interpret the Roman law in
affirming regalian rights as an excuse to dispossess the weaker. The
rights to the mines form no small part of the differences between these
Potentates and the more important of their subjects; and with the
gradual accretion of power into a few hands, we find only the most
powerful of vassals able to resist such encroachment. However, as to
what position the landlord or miner held in these rights, we have little
indication until about the beginning of the 13th century, after which
there appear several well-known charters, which as time went on were
elaborated into practical codes of mining law. The earliest of these
charters are those of the Bishop of Trent, 1185; that of the Harz
Miners, 1219; of the town of Iglau in 1249. Many such in connection with
other districts appear throughout the 13th, 14th, and 15th centuries.
(References to the most important of such charters may be found in
Sternberg, _Umrisse der Geschichte des Bergbaues_, Prague, 1838;
Eisenhart, _De Regali Metalli Fodinarium_, Helmestadt, 1681; Gmelin,
_Beytraege zur Geschichte des Teutschen Bergbaus_, Halle, 1783;
Inama-Sternegg, _Deutsche Wirthschaftsgeschichte_, Leipzig, 1879-1901;
Transactions, Royal Geol. Soc. Cornwall VI, 155; Lewis, The Stannaries,
New York, 1908.) By this time a number of mining communities had grown
up, and the charters in the main are a confirmation to them of certain
privileges; they contain, nevertheless, rigorous reservation of the
regalian right. The landlord, where present, was usually granted some
interest in the mine, but had to yield to the miner free entry. The
miner was simply a sort of tributer to the Crown, loaded with an
obligation when upon private lands to pay a further portion of his
profits to the landlord. He held tenure only during strenuous operation.
However, it being necessary to attract skilled men, they were granted
many civil privileges not general to the people; and from many of the
principal mining towns "free cities" were created, possessing a measure
of self-government. There appear in the Iglau charter of 1249 the first
symptoms of the "apex" form of title, this being the logical development
of the conception that the minerals were of quite distinct ownership
from the land. The law, as outlined by Agricola, is much the same as set
out in the Iglavian Charter of three centuries before, and we must
believe that such fully developed conceptions as that charter conveys
were but the confirmation of customs developed over generations.

In France the landlord managed to maintain a stronger position
_vis-a-vis_ with the Crown, despite much assertion of its rights; and as
a result, while the landlord admitted the right to a tithe for the
Crown, he maintained the actual possession, and the boundaries were
defined with the land.

In England the law varied with special mining communities, such as
Cornwall, Devon, the Forest of Dean, the Forest of Mendip, Alston Moor,
and the High Peak, and they exhibit a curious complex of individual
growth, of profound interest to the student of the growth of
institutions. These communities were of very ancient origin, some of
them at least pre-Roman; but we are, except for the reference in Pliny,
practically without any idea of their legal doings until after the
Norman occupation (1066 A.D.). The genius of these conquerors for
systematic government soon led them to inquire into the doings of these
communities, and while gradually systematising their customs into law,
they lost no occasion to assert the regalian right to the minerals. In
the two centuries subsequent to their advent there are on record
numerous inquisitions, with the recognition and confirmation of "the
customs and liberties which had existed from time immemorial," always
with the reservation to the Crown of some sort of royalty. Except for
the High Peak in Derbyshire, the period and origin of these "customs and
liberties" are beyond finding out, as there is practically no record of
English History between the Roman withdrawal and the Norman occupation.
There may have been "liberties" under the Romans, but there is not a
shred of evidence on the subject, and our own belief is that the forms
of self-government which sprang up were the result of the Roman
evacuation. The miner had little to complain of in the Norman treatment
in these matters; but between the Crown and the landlord as represented
by the Barons, Lords of the Manor, etc., there were wide differences of
opinion on the regalian rights, for in the extreme interpretation of the
Crown it tended greatly to curtail the landlord's position in the
matter, and the success of the Crown on this subject was by no means
universal. In fact, a considerable portion of English legal history of
mines is but the outcropping of this conflict, and one of the
concessions wrung from King John at Runnymede in 1215 was his
abandonment of a portion of such claims.

The mining communities of Cornwall and Devon were early in the
13th century definitely chartered into corporations--"The
Stannaries"--possessing definite legislative and executive functions,
judicial powers, and practical self-government; but they were required
to make payment of the tithe in the shape of "coinage" on the tin. Such
recognition, while but a ratification of prior custom, was not obtained
without struggle, for the Norman Kings early asserted wide rights over
the mines. Tangible record of mining in these parts, from a legal point
of view, practically begins with a report by William de Wrotham in 1198
upon his arrangements regarding the coinage. A charter of King John in
1201, while granting free right of entry to the miners, thus usurped the
rights of the landlords--a claim which he was compelled by the Barons to
moderate; the Crown, as above mentioned did maintain its right to a
royalty, but the landlord held the minerals. It is not, however, until
the time of Richard Carew's "Survey of Cornwall" (London, 1602) that we
obtain much insight into details of miners' title, and the customs there
set out were maintained in broad principle down to the 19th century. At
Carew's time the miner was allowed to prospect freely upon "Common" or
wastrel lands (since mostly usurped by landlords), and upon mineral
discovery marked his boundaries, within which he was entitled to the
vertical contents. Even upon such lands, however, he must acknowledge
the right of the lord of the manor to a participation in the mine. Upon
"enclosed" lands he had no right of entry without the consent of the
landlord; in fact, the minerals belonged to the land as they do to-day
except where voluntarily relinquished. In either case he was compelled
to "renew his bounds" once a year, and to operate more or less
continuously to maintain the right once obtained. There thus existed a
"labour condition" of variable character, usually imposed more or less
vigorously in the bargains with landlords. The regulations in Devonshire
differed in the important particular that the miner had right of entry
to private lands, although he was not relieved of the necessity to give
a participation of some sort to the landlord. The Forests of Dean,
Mendip, and other old mining communities possessed a measure of
self-government, which do not display any features in their law
fundamentally different from those of Cornwall and Devon. The High Peak
lead mines of Derbyshire, however, exhibit one of the most profoundly
interesting of these mining communities. As well as having distinctively
Saxon names for some of the mines, the customs there are of undoubted
Saxon origin, and as such their ratification by the Normans caused the
survival of one of the few Saxon institutions in England--a fact which,
we believe, has been hitherto overlooked by historians. Beginning with
inquisitions by Edward I. in 1288, there is in the Record Office a
wealth of information, the bare titles of which form too extensive a
list to set out here. (Of published works, the most important are Edward
Manlove's "The Liberties and Customs of the Lead Mines within the
Wapentake of Wirksworth," London, 1653, generally referred to as the
"Rhymed Chronicle"; Thomas Houghton, "Rara Avis in Terra," London, 1687;
William Hardy, "The Miner's Guide," Sheffield, 1748; Thomas Tapping,
"High Peak Mineral Customs," London, 1851.) The miners in this district
were presided over by a "Barmaster," "Barghmaster," or "Barmar," as he
was variously spelled, all being a corruption of the German Bergmeister,
with precisely the same functions as to the allotment of title,
settlement of disputes, etc., as his Saxon progenitor had, and, like
him, he was advised by a jury. The miners had entry to all lands except
churchyards (this regulation waived upon death), and a few similar
exceptions, and was subject to royalty to the Crown and the landlord.
The discoverer was entitled to a finder's "meer" of extra size, and his
title was to the vein within the end lines, _i.e._, the "apex" law. This
title was held subject to rigorous labour conditions, amounting to
forfeiture for failure to operate the mine for a period of nine weeks.
Space does not permit of the elaboration of the details of this subject,
which we hope to pursue elsewhere in its many historical bearings. Among
these we may mention that if the American "Apex law" is of English
descent, it must be laid to the door of Derbyshire, and not of Cornwall,
as is generally done. Our own belief, however, is that the American
"apex" conception came straight from Germany.

It is not our purpose to follow these inquiries into mining law beyond
the 15th century, but we may point out that with the growth of the
sentiment of individualism the miners and landlords obtained steadily
wider and wider rights at the cost of the State, until well within the
19th century. The growth of stronger communal sentiment since the middle
of the last century has already found its manifestation in the
legislation with regard to mines, for the laws of South Africa,
Australia, and England, and the agitation in the United States are all
toward greater restrictions on the mineral ownership in favour of the
State.

[7] ?_De Limitibus et de Re Agraria_ of Sextus Julius Frontinus (about
50-90 A.D.)

[8] Such a form of ownership is very old. Apparently upon the
instigation of Xenophon (see Note 7, p. 29) the Greeks formed companies
to work the mines of Laurion, further information as to which is given
in note 6, p. 27. Pliny (Note 7, p. 232) mentions the Company working
the quicksilver mines in Spain. In fact, company organization was very
common among the Romans, who speculated largely in the shares,
especially in those companies which farmed the taxes of the provinces,
or leased public lands, or took military and civil contracts.

[9] The Latin text gives one-sixth, obviously an error.

[10] A _symposium_ is a banquet, and a _symbola_ is a contribution of
money to a banquet. This sentence is probably a play on the old German
_Zeche_, mine, this being also a term for a drinking bout.

[11] In the Latin text this is "three"--obviously an error.

[12] See Note 9, p. 74, for further information with regard to these
mines. The Rhenish gulden was about 6.9 shillings, or $1.66. Silver was
worth about this amount per Troy ounce at this period, so that roughly,
silver of a value of 1,100 gulden would be about 1,100 Troy ounces. The
Saxon thaler was worth about 4.64 shillings or about $1.11. The thaler,
therefore, represented about .65 Troy ounces of silver, so that 300
thalers were about 195 Troy ounces, and 225 thalers about 146 Troy
ounces.

[13] _Opera continens_. The Glossary gives _schicht_,--the origin of the
English "shift."

[14] The terms in the Latin text are _donator_, a giver of a gift, and
_donatus_, a receiver. It appears to us, however, that some
consideration passed, and we have, therefore, used "seller" and "buyer."

[15] See Note 29, p. 23.

[16] _Decemviri_--"The Ten Men." The original _Decemviri_ were a body
appointed by the Romans in 452 B.C., principally to codify the law. Such
commissions were afterward instituted for other purposes, but the
analogy of the above paragraph is a little remote.

[17] This work was apparently never published; see Appendix A.




BOOK V.


In the last book I have explained the methods of delimiting the meers
along each kind of vein, and the duties of mine officials. In this
book[1] I will in like manner explain the principles of underground
mining and the art of surveying. First then, I will proceed to deal with
those matters which pertain to the former heading, since both the
subject and methodical arrangement require it. And so I will describe
first of all the digging of shafts, tunnels, and drifts on _venae
profundae_; next I will discuss the good indications shown by
_canales_[2], by the materials which are dug out, and by the rocks; then
I will speak of the tools by which veins and rocks are broken down and
excavated; the method by which fire shatters the hard veins; and
further, of the machines with which water is drawn from the shafts and
air is forced into deep shafts and long tunnels, for digging is impeded
by the inrush of the former or the failure of the latter; next I will
deal with the two kinds of shafts, and with the making of them and of
tunnels; and finally, I will describe the method of mining _venae
dilatatae_, _venae cumulatae_, and stringers.

Now when a miner discovers a _vena profunda_ he begins sinking a shaft
and above it sets up a windlass, and builds a shed over the shaft to
prevent the rain from falling in, lest the men who turn the windlass be
numbed by the cold or troubled by the rain. The windlass men also place
their barrows in it, and the miners store their iron tools and other
implements therein. Next to the shaft-house another house is built,
where the mine foreman and the other workmen dwell, and in which are
stored the ore and other things which are dug out. Although some persons
build only one house, yet because sometimes boys and other living things
fall into the shafts, most miners deliberately place one house apart
from the other, or at least separate them by a wall.

[Illustration 103 (Shafts): Three vertical shafts, of which the first,
A, does not reach the tunnel; the second, B, reaches the tunnel; to the
third, C, the tunnel has not yet been driven. D--Tunnel.]

[Illustration 104 (Shafts): Three inclined shafts, of which A does not
yet reach the tunnel; B reaches the tunnel; to the third, C, the tunnel
has not yet been driven. D--Tunnel.]

Now a shaft is dug, usually two fathoms long, two-thirds of a fathom
wide, and thirteen fathoms deep; but for the purpose of connecting with
a tunnel which has already been driven in a hill, a shaft may be sunk to
a depth of only eight fathoms, at other times to fourteen, more or
less[3]. A shaft may be made vertical or inclined, according as the vein
which the miners follow in the course of digging is vertical or
inclined. A tunnel is a subterranean ditch driven lengthwise, and is
nearly twice as high as it is broad, and wide enough that workmen and
others may be able to pass and carry their loads. It is usually one and
a quarter fathoms high, while its width is about three and
three-quarters feet. Usually two workmen are required to drive it, one
of whom digs out the upper and the other the lower part, and the one
goes forward, while the other follows closely after. Each sits upon
small boards fixed securely from the footwall to the hangingwall, or if
the vein is a soft one, sometimes on a wedge-shaped plank fixed on to
the vein itself. Miners sink more inclined shafts than vertical, and
some of each kind do not reach to tunnels, while some connect with them.
But as for some shafts, though they have already been sunk to the
required depth, the tunnel which is to pierce the mountain may not yet
have been driven far enough to connect with them.

[Illustration 105 (Shafts): A--Shaft. B, C--Drift. D--Another shaft.
E--Tunnel. F--Mouth of tunnel.]

It is advantageous if a shaft connects with a tunnel, for then the
miners and other workmen carry on more easily the work they have
undertaken; but if the shaft is not so deep, it is usual to drift from
one or both sides of it. From these openings the owner or foreman
becomes acquainted with the veins and stringers that unite with the
principal vein, or cut across it, or divide it obliquely; however, my
discourse is now concerned mainly with _vena profunda_, but most of all
with the metallic material which it contains. Excavations of this kind
were called by the Greeks [Greek: kryptai] for, extending along after
the manner of a tunnel, they are entirely hidden within the ground.
This kind of an opening, however, differs from a tunnel in that it is
dark throughout its length, whereas a tunnel has a mouth open to
daylight.

I have spoken of shafts, tunnels, and drifts. I will now speak of the
indications given by the _canales_, by the materials which are dug out,
and by the rocks. These indications, as also many others which I will
explain, are to a great extent identical in _venae dilatatae_ and _venae
cumulatae_ with _venae profundae_.

When a stringer junctions with a main vein and causes a swelling, a
shaft should be sunk at the junction. But when we find the stringer
intersecting the main vein crosswise or obliquely, if it descends
vertically down to the depths of the earth, a second shaft should be
sunk to the point where the stringer cuts the main vein; but if the
stringer cuts it obliquely the shaft should be two or three fathoms
back, in order that the junction may be pierced lower down. At such
junctions lies the best hope of finding the ore for the sake of which we
explore the ground, and if ore has already been found, it is usually
found in much greater abundance at that spot. Again, if several
stringers descend into the earth, the miner, in order to pierce through
the point of contact, should sink the shaft in the midst of these
stringers, or else calculate on the most prominent one.

Since an inclined vein often lies near a vertical vein, it is advisable
to sink a shaft at the spot where a stringer or cross-vein cuts them
both; or where a _vena dilatata_ or a stringer _dilatata_ passes
through, for minerals are usually found there. In the same way we have a
good prospect of finding metal at the point where an inclined vein joins
a vertical one; this is why miners cross-cut the hangingwall or footwall
of a main vein, and in these openings seek for a vein which may junction
with the principal vein a few fathoms below. Nay, further, these same
miners, if no stringer or cross-vein intersects the main vein so that
they can follow it in their workings, even cross-cut through the solid
rock of the hangingwall or footwall. These cross-cuts are likewise
called "[Greek: kryptai]," whether the beginning of the opening which
has to be undertaken is made from a tunnel or from a drift. Miners have
some hope when only a cross vein cuts a main vein. Further, if a vein
which cuts the main vein obliquely does not appear anywhere beyond it,
it is advisable to dig into that side of the main vein toward which the
oblique vein inclines, whether the right or left side, that we may
ascertain if the main vein has absorbed it; if after cross-cutting six
fathoms it is not found, it is advisable to dig on the other side of the
main vein, that we may know for certain whether it has carried it
forward. The owners of a main vein can often dig no less profitably on
that side where the vein which cuts the main vein again appears, than
where it first cuts it; the owners of the intersecting vein, when that
is found again, recover their title, which had in a measure been lost.

The common miners look favourably upon the stringers which come from the
north and join the main vein; on the other hand, they look unfavourably
upon those which come from the south, and say that these do much harm to
the main vein, while the former improve it. But I think that miners
should not neglect either of them: as I showed in Book III, experience
does not confirm those who hold this opinion about veins, so now again
I could furnish examples of each kind of stringers rejected by the
common miners which have proved good, but I know this could be of little
or no benefit to posterity.

If the miners find no stringers or veins in the hangingwall or footwall
of the main vein, and if they do not find much ore, it is not worth
while to undertake the labour of sinking another shaft. Nor ought a
shaft to be sunk where a vein is divided into two or three parts, unless
the indications are satisfactory that those parts may be united and
joined together a little later. Further, it is a bad indication for a
vein rich in mineral to bend and turn hither and thither, for unless it
goes down again into the ground vertically or inclined, as it first
began, it produces no more metal; and even though it does go down again,
it often continues barren. Stringers which in their outcrops bear
metals, often disappoint miners, no metal being found in depth. Further,
inverted seams in the rocks are counted among the bad indications.

The miners hew out the whole of solid veins when they show clear
evidence of being of good quality; similarly they hew out the drusy[4]
veins, especially if the cavities are plainly seen to have formerly
borne metal, or if the cavities are few and small. They do not dig
barren veins through which water flows, if there are no metallic
particles showing; occasionally, however, they dig even barren veins
which are free from water, because of the pyrites which is devoid of all
metal, or because of a fine black soft substance which is like wool.
They dig stringers which are rich in metal, or sometimes, for the
purpose of searching for the vein, those that are devoid of ore which
lie near the hangingwall or footwall of the main vein. This then,
generally speaking, is the mode of dealing with stringers and veins.

Let us now consider the metallic material which is found in the
_canales_ of _venae profundae_, _venae dilatatae_, and _venae
cumulatae_, being in all these either cohesive and continuous, or
scattered and dispersed among them, or swelling out in bellying shapes,
or found in veins or stringers which originate from the main vein and
ramify like branches; but these latter veins and stringers are very
short, for after a little space they do not appear again. If we come
across a small quantity of metallic material it is an indication; but if
a large quantity, it is not an "indication," but the very thing for
which we explore the earth. As soon as a miner who searches for veins
discovers pure metal or minerals, or rich metallic material, or a great
abundance of material which is poor in metal, let him sink a shaft on
the spot without any delay. If the material appears more abundant or of
better quality on the one side, he will incline his digging in that
direction.

Gold, silver, copper, and quicksilver are often found native[5]; less
often iron and bismuth; almost never tin and lead. Nevertheless
tin-stone is not far removed from the pure white tin which is melted out
of them, and galena, from which lead is obtained, differs little from
that metal itself.

Now we may classify gold ores. Next after native gold, we come to the
_rudis_[6], of yellowish green, yellow, purple, black, or outside red
and inside gold colour. These must be reckoned as the richest ores,
because the gold exceeds the stone or earth in weight. Next come all
gold ores of which each one hundred _librae_ contains more than three
_unciae_ of gold[7]; for although but a small proportion of gold is
found in the earth or stone, yet it equals in value other metals of
greater weight.[8] All other gold ores are considered poor, because the
earth or stone too far outweighs the gold. A vein which contains a
larger proportion of silver than of gold is rarely found to be a rich
one. Earth, whether it be dry or wet, rarely abounds in gold; but in dry
earth there is more often found a greater quantity of gold, especially
if it has the appearance of having been melted in a furnace, and if it
is not lacking in scales resembling mica. The solidified juices, azure,
chrysocolla, orpiment, and realgar, also frequently contain gold.
Likewise native or _rudis_ gold is found sometimes in large, and
sometimes in small quantities in quartz, schist, marble, and also in
stone which easily melts in fire of the second degree, and which is
sometimes so porous that it seems completely decomposed. Lastly, gold is
found in pyrites, though rarely in large quantities.

When considering silver ores other than native silver, those ores are
classified as rich, of which each one hundred _librae_ contains more
than three _librae_ of silver. This quality comprises _rudis_ silver,
whether silver glance or ruby silver, or whether white, or black, or
grey, or purple, or yellow, or liver-coloured, or any other. Sometimes
quartz, schist, or marble is of this quality also, if much native or
_rudis_ silver adheres to it. But that ore is considered of poor quality
if three _librae_ of silver at the utmost are found in each one hundred
_librae_ of it[9]. Silver ore usually contains a greater quantity than
this, because Nature bestows quantity in place of quality; such ore is
mixed with all kinds of earth and stone compounds, except the various
kinds of _rudis_ silver; especially with pyrites, _cadmia metallica
fossilis_, galena, _stibium_, and others.

As regards other kinds of metal, although some rich ores are found,
still, unless the veins contain a large quantity of ore, it is very
rarely worth while to dig them. The Indians and some other races do
search for gems in veins hidden deep in the earth, but more often they
are noticed from their clearness, or rather their brilliancy, when
metals are mined. When they outcrop, we follow veins of marble by mining
in the same way as is done with rock or building-stones when we come
upon them. But gems, properly so called, though they sometimes have
veins of their own, are still for the most part found in mines and rock
quarries, as the lodestone in iron mines, the emery in silver mines, the
_lapis judaicus_, _trochites_, and the like in stone quarries where the
diggers, at the bidding of the owners, usually collect them from the
seams in the rocks.[10] Nor does the miner neglect the digging of
"extraordinary earths,"[11] whether they are found in gold mines,
silver mines, or other mines; nor do other miners neglect them if they
are found in stone quarries, or in their own veins; their value is
usually indicated by their taste. Nor, lastly, does the miner fail to
give attention to the solidified juices which are found in metallic
veins, as well as in their own veins, from which he collects and gathers
them. But I will say no more on these matters, because I have explained
more fully all the metals and mineral substances in the books "_De
Natura Fossilium_."

But I will return to the indications. If we come upon earth which is
like lute, in which there are particles of any sort of metal, native or
_rudis_, the best possible indication of a vein is given to miners, for
the metallic material from which the particles have become detached is
necessarily close by. But if this kind of earth is found absolutely
devoid of all metallic material, but fatty, and of white, green, blue,
and similar colours, they must not abandon the work that has been
started. Miners have other indications in the veins and stringers, which
I have described already, and in the rocks, about which I will speak a
little later. If the miner comes across other dry earths which contain
native or _rudis_ metal, that is a good indication; if he comes across
yellow, red, black, or some other "extraordinary" earth, though it is
devoid of mineral, it is not a bad indication. Chrysocolla, or azure, or
verdigris, or orpiment, or realgar, when they are found, are counted
among the good indications. Further, where underground springs throw up
metal we ought to continue the digging we have begun, for this points to
the particles having been detached from the main mass like a fragment
from a body. In the same way the thin scales of any metal adhering to
stone or rock are counted among the good indications. Next, if the veins
which are composed partly of quartz, partly of clayey or dry earth,
descend one and all into the depths of the earth together, with their
stringers, there is good hope of metal being found; but if the stringers
afterward do not appear, or little metallic material is met with, the
digging should not be given up until there is nothing remaining. Dark or
black or horn or liver-coloured quartz is usually a good sign; white is
sometimes good, sometimes no sign at all. But calc-spar, showing itself
in a _vena profunda_, if it disappears a little lower down is not a good
indication; for it did not belong to the vein proper, but to some
stringer. Those kinds of stone which easily melt in fire, especially if
they are translucent (fluorspar?), must be counted among the medium
indications, for if other good indications are present they are good,
but if no good indications are present, they give no useful
significance. In the same way we ought to form our judgment with regard
to gems. Veins which at the hangingwall and footwall have horn-coloured
quartz or marble, but in the middle clayey earth, give some hope;
likewise those give hope in which the hangingwall or footwall shows
iron-rust coloured earth, and in the middle greasy and sticky earth;
also there is hope for those which have at the hanging or footwall that
kind of earth which we call "soldiers' earth," and in the middle black
earth or earth which looks as if burnt. The special indication of gold
is orpiment; of silver is bismuth and _stibium_; of copper is verdigris,
_melanteria_, _sory_, _chalcitis_, _misy_, and vitriol; of tin is the
large pure black stones of which the tin itself is made, and a material
they dig up resembling litharge; of iron, iron rust. Gold and copper are
equally indicated by chrysocolla and azure; silver and lead, by the
lead. But, though miners rightly call bismuth "the roof of silver," and
though copper pyrites is the common parent of vitriol and _melanteria_,
still these sometimes have their own peculiar minerals, just as have
orpiment and _stibium_.

Now, just as certain vein materials give miners a favourable indication,
so also do the rocks through which the _canales_ of the veins wind their
way, for sand discovered in a mine is reckoned among the good
indications, especially if it is very fine. In the same way schist, when
it is of a bluish or blackish colour, and also limestone, of whatever
colour it may be, is a good sign for a silver vein. There is a rock of
another kind that is a good sign; in it are scattered tiny black stones
from which tin is smelted; especially when the whole space between the
veins is composed of this kind of rock. Very often indeed, this good
kind of rock in conjunction with valuable stringers contains within its
folds the _canales_ of mineral bearing veins: if it descends vertically
into the earth, the benefit belongs to that mine in which it is seen
first of all; if inclined, it benefits the other neighbouring mines[12].
As a result the miner who is not ignorant of geometry can calculate from
the other mines the depth at which the _canales_ of a vein bearing rich
metal will wind its way through the rock into his mine. So much for
these matters.

I now come to the mode of working, which is varied and complex, for in
some places they dig crumbling ore, in others hard ore, in others a
harder ore, and in others the hardest kind of ore. In the same way, in
some places the hangingwall rock is soft and fragile, in others hard, in
others harder, and in still others of the hardest sort. I call that ore
"crumbling" which is composed of earth, and of soft solidified juices;
that ore "hard" which is composed of metallic minerals and moderately
hard stones, such as for the most part are those which easily melt in a
fire of the first and second orders, like lead and similar materials. I
call that ore "harder" when with those I have already mentioned are
combined various sorts of quartz, or stones which easily melt in fire of
the third degree, or pyrites, or _cadmia_, or very hard marble. I call
that ore hardest, which is composed throughout the whole vein of these
hard stones and compounds. The hanging or footwalls of a vein are hard,
when composed of rock in which there are few stringers or seams; harder,
in which they are fewer; hardest, in which they are fewest or none at
all. When these are absent, the rock is quite devoid of water which
softens it. But the hardest rock of the hanging or footwall, however, is
seldom as hard as the harder class of ore.

Miners dig out crumbling ore with the pick alone. When the metal has not
yet shown itself, they do not discriminate between the hangingwall and
the veins; when it has once been found, they work with the utmost care.
For first of all they tear away the hangingwall rock separately from the
vein, afterward with a pick they dislodge the crumbling vein from the
footwall into a dish placed underneath to prevent any of the metal from
falling to the ground. They break a hard vein loose from the footwall by
blows with a hammer upon the first kind of iron tool[13], all of which
are designated by appropriate names, and with the same tools they hew
away the hard hangingwall rock. They hew out the hangingwall rock in
advance more frequently, the rock of the footwall more rarely; and
indeed, when the rock of the footwall resists iron tools, the rock of
the hangingwall certainly cannot be broken unless it is allowable to
shatter it by fire. With regard to the harder veins which are tractable
to iron tools, and likewise with regard to the harder and hardest kind
of hangingwall rock, they generally attack them with more powerful iron
tools, in fact, with the fourth kind of iron tool, which are called by
their appropriate names; but if these are not ready to hand, they use
two or three iron tools of the first kind together. As for the hardest
kind of metal-bearing vein, which in a measure resists iron tools, if
the owners of the neighbouring mines give them permission, they break it
with fires. But if these owners refuse them permission, then first of
all they hew out the rock of the hangingwall, or of the footwall if it
be less hard; then they place timbers set in hitches in the hanging or
footwall, a little above the vein, and from the front and upper part,
where the vein is seen to be seamed with small cracks, they drive into
one of the little cracks one of the iron tools which I have mentioned;
then in each fracture they place four thin iron blocks, and in order to
hold them more firmly, if necessary, they place as many thin iron plates
back to back; next they place thinner iron plates between each two iron
blocks, and strike and drive them by turns with hammers, whereby the
vein rings with a shrill sound; and the moment when it begins to be
detached from the hangingwall or footwall rock, a tearing sound is
heard. As soon as this grows distinct the miners hastily flee away; then
a great crash is heard as the vein is broken and torn, and falls down.
By this method they throw down a portion of a vein weighing a hundred
pounds more or less. But if the miners by any other method hew the
hardest kind of vein which is rich in metal, there remain certain
cone-shaped portions which can be cut out afterward only with
difficulty. As for this knob of hard ore, if it is devoid of metal, or
if they are not allowed to apply fire to it, they proceed round it by
digging to the right or left, because it cannot be broken into by iron
wedges without great expense. Meantime, while the workmen are carrying
out the task they have undertaken, the depths of the earth often resound
with sweet singing, whereby they lighten a toil which is of the severest
kind and full of the greatest dangers.

As I have just said, fire shatters the hardest rocks, but the method of
its application is not simple[14]. For if a vein held in the rocks
cannot be hewn out because of the hardness or other difficulty, and the
drift or tunnel is low, a heap of dried logs is placed against the rock
and fired; if the drift or tunnel is high, two heaps are necessary, of
which one is placed above the other, and both burn until the fire has
consumed them. This force does not generally soften a large portion of
the vein, but only some of the surface. When the rock in the hanging or
footwall can be worked by the iron tools and the vein is so hard that it
is not tractable to the same tools, then the walls are hollowed out; if
this be in the end of the drift or tunnel or above or below, the vein is
then broken by fire, but not by the same method; for if the hollow is
wide, as many logs are piled into it as possible, but if narrow, only a
few. By the one method the greater fire separates the vein more
completely from the footwall or sometimes from the hangingwall, and by
the other, the smaller fire breaks away less of the vein from the rock,
because in that case the fire is confined and kept in check by portions
of the rock which surround the wood held in such a narrow excavation.
Further, if the excavation is low, only one pile of logs is placed in
it, if high, there are two, one placed above the other, by which plan
the lower bundle being kindled sets alight the upper one; and the fire
being driven by the draught into the vein, separates it from the rock
which, however hard it may be, often becomes so softened as to be the
most easily breakable of all. Applying this principle, Hannibal, the
Carthaginian General, imitating the Spanish miners, overcame the
hardness of the Alps by the use of vinegar and fire. Even if a vein is a
very wide one, as tin veins usually are, miners excavate into the small
streaks, and into those hollows they put dry wood and place amongst them
at frequent intervals sticks, all sides of which are shaved down
fan-shaped, which easily take light, and when once they have taken fire
communicate it to the other bundles of wood, which easily ignite.

[Illustration 120 (Fire-setting): A--Kindled logs. B--Sticks shaved down
fan-shaped. C--Tunnel.]

While the heated veins and rock are giving forth a foetid vapour and the
shafts or tunnels are emitting fumes, the miners and other workmen do
not go down in the mines lest the stench affect their health or actually
kill them, as I will explain in greater detail when I come to speak of
the evils which affect miners. The _Bergmeister_, in order to prevent
workmen from being suffocated, gives no one permission to break veins or
rock by fire in shafts or tunnels where it is possible for the poisonous
vapour and smoke to permeate the veins or stringers and pass through
into the neighbouring mines, which have no hard veins or rock. As for
that part of a vein or the surface of the rock which the fire has
separated from the remaining mass, if it is overhead, the miners
dislodge it with a crowbar, or if it still has some degree of hardness,
they thrust a smaller crowbar into the cracks and so break it down, but
if it is on the sides they break it with hammers. Thus broken off, the
rock tumbles down; or if it still remains, they break it off with picks.
Rock and earth on the one hand, and metal and ore on the other, are
filled into buckets separately and drawn up to the open air or to the
nearest tunnel. If the shaft is not deep, the buckets are drawn up by a
machine turned by men; if it is deep, they are drawn by machines turned
by horses.

It often happens that a rush of water or sometimes stagnant air hinders
the mining; for this reason miners pay the greatest attention to these
matters, just as much as to digging, or they should do so. The water of
the veins and stringers and especially of vacant workings, must be
drained out through the shafts and tunnels. Air, indeed, becomes
stagnant both in tunnels and in shafts; in a deep shaft, if it be by
itself, this occurs if it is neither reached by a tunnel nor connected
by a drift with another shaft; this occurs in a tunnel if it has been
driven too far into a mountain and no shaft has yet been sunk deep
enough to meet it; in neither case can the air move or circulate. For
this reason the vapours become heavy and resemble mist, and they smell
of mouldiness, like a vault or some underground chamber which has been
completely closed for many years. This suffices to prevent miners from
continuing their work for long in these places, even if the mine is full
of silver or gold, or if they do continue, they cannot breathe freely
and they have headaches; this more often happens if they work in these
places in great numbers, and bring many lamps, which then supply them
with a feeble light, because the foul air from both lamps and men make
the vapours still more heavy.

A small quantity of water is drawn from the shafts by machines of
different kinds which men turn or work. If so great a quantity has
flowed into one shaft as greatly to impede mining, another shaft is sunk
some fathoms distant from the first, and thus in one of them work and
labour are carried on without hindrance, and the water is drained into
the other, which is sunk lower than the level of the water in the first
one; then by these machines or by those worked by horses, the water is
drawn up into the drain and flows out of the shaft-house or the mouth of
the nearest tunnel. But when into the shaft of one mine, which is sunk
more deeply, there flows all the water of all the neighbouring mines,
not only from that vein in which the shaft is sunk, but also from other
veins, then it becomes necessary for a large sump to be made to collect
the water; from this sump the water is drained by machines which draw it
through pipes, or by ox-hides, about which I will say more in the next
book. The water which pours into the tunnels from the veins and
stringers and seams in the rocks is carried away in the drains.

Air is driven into the extremities of deep shafts and long tunnels by
powerful blowing machines, as I will explain in the following book,
which will deal with these machines also. The outer air flows
spontaneously into the caverns of the earth, and when it can pass
through them comes out again. This, however, comes about in different
ways, for in spring and summer it flows into the deeper shafts,
traverses the tunnels or drifts, and finds its way out of the shallower
shafts; similarly at the same season it pours into the lowest tunnel
and, meeting a shaft in its course, turns aside to a higher tunnel and
passes out therefrom; but in autumn and winter, on the other hand, it
enters the upper tunnel or shaft and comes out at the deeper ones. This
change in the flow of air currents occurs in temperate regions at the
beginning of spring and the end of autumn, but in cold regions at the
end of spring and the beginning of autumn. But at each period, before
the air regularly assumes its own accustomed course, generally for a
space of fourteen days it undergoes frequent variations, now blowing
into an upper shaft or tunnel, now into a lower one. But enough of this,
let us now proceed to what remains.

There are two kinds of shafts, one of the depth already described, of
which kind there are usually several in one mine; especially if the mine
is entered by a tunnel and is metal-bearing. For when the first tunnel
is connected with the first shaft, two new shafts are sunk; or if the
inrush of water hinders sinking, sometimes three are sunk; so that one
may take the place of a sump and the work of sinking which has been
begun may be continued by means of the remaining two shafts; the same is
done in the case of the second tunnel and the third, or even the fourth,
if so many are driven into a mountain. The second kind of shaft is very
deep, sometimes as much as sixty, eighty, or one hundred fathoms. These
shafts continue vertically toward the depths of the earth, and by means
of a hauling-rope the broken rock and metalliferous ores are drawn out
of the mine; for which reason miners call them vertical shafts. Over
these shafts are erected machines by which water is extracted; when they
are above ground the machines are usually worked by horses, but when
they are in tunnels, other kinds are used which are turned by
water-power. Such are the shafts which are sunk when a vein is rich in
metal.

Now shafts, of whatever kind they may be, are supported in various ways.
If the vein is hard, and also the hanging and footwall rock, the shaft
does not require much timbering, but timbers are placed at intervals,
one end of each of which is fixed in a hitch cut into the rock of the
hangingwall and the other fixed into a hitch cut in the footwall. To
these timbers are fixed small timbers along the footwall, to which are
fastened the lagging and ladders. The lagging is also fixed to the
timbers, both to those which screen off the shaft on the ends from the
vein, and to those which screen off the rest of the shaft from that part
in which the ladders are placed. The lagging on the sides of the shaft
confine the vein, so as to prevent fragments of it which have become
loosened by water from dropping into the shaft and terrifying, or
injuring, or knocking off the miners and other workmen who are going up
or down the ladders from one part of the mine to another. For the same
reason, the lagging between the ladders and the haulage-way on the other
hand, confine and shut off from the ladders the fragments of rock which
fall from the buckets or baskets while they are being drawn up;
moreover, they make the arduous and difficult descent and ascent to
appear less terrible, and in fact to be less dangerous.

[Illustration 123 (Timbering Shafts): A--Wall plates. B--Dividers.
C--Long end posts. D--End plates.]

If a vein is soft and the rock of the hanging and footwalls is weak, a
closer structure is necessary; for this purpose timbers are joined
together, in rectangular shapes and placed one after the other without a
break. These are arranged on two different systems; for either the
square ends of the timbers, which reach from the hangingwall to the
footwall, are fixed into corresponding square holes in the timbers which
lie along the hanging or footwall, or the upper part of the end of one
and the lower part of the end of the other are cut out and one laid on
the other. The great weight of these joined timbers is sustained by
stout beams placed at intervals, which are deeply set into hitches in
the footwall and hangingwall, but are inclined. In order that these
joined timbers may remain stationary, wooden wedges or poles cut from
trees are driven in between the timbers and the vein and the hangingwall
and the footwall; and the space which remains empty is filled with loose
dirt. If the hanging and footwall rock is sometimes hard and sometimes
soft, and the vein likewise, solid joined timbers are not used, but
timbers are placed at intervals; and where the rock is soft and the vein
crumbling, carpenters put in lagging between them and the wall rocks,
and behind these they fill with loose dirt; by this means they fill up
the void.

When a very deep shaft, whether vertical or inclined, is supported by
joined timbers, then, since they are sometimes of bad material and a
fall is threatened, for the sake of greater firmness three or four pairs
of strong end posts are placed between these, one pair on the
hangingwall side, the other on the footwall side. To prevent them from
falling out of position and to make them firm and substantial, they are
supported by frequent end plates, and in order that these may be more
securely fixed they are mortised into the posts. Further, in whatever
way the shaft may be timbered, dividers are placed upon the wall plates,
and to these is fixed lagging, and this marks off and separates the
ladder-way from the remaining part of the shaft. If a vertical shaft is
a very deep one, planks are laid upon the timbers by the side of the
ladders and fixed on to the timbers, in order that the men who are going
up or down may sit or stand upon them and rest when they are tired. To
prevent danger to the shovellers from rocks which, after being drawn up
from so deep a shaft fall down again, a little above the bottom of the
shaft small rough sticks are placed close together on the timbers, in
such a way as to cover the whole space of the shaft except the
ladder-way. A hole, however, is left in this structure near the
footwall, which is kept open so that there may be one opening to the
shaft from the bottom, that the buckets full of the materials which have
been dug out may be drawn from the shaft through it by machines, and may
be returned to the same place again empty; and so the shovellers and
other workmen, as it were hiding beneath this structure, remain
perfectly safe in the shaft.

[Illustration 125 (Timbering Tunnels): A--Posts. B--Caps. C--Sills.
D--Doors. E--Lagging. F--Drains.]

In mines on one vein there are driven one, two, or sometimes three or
more tunnels, always one above the other. If the vein is solid and hard,
and likewise the hanging and footwall rock, no part of the tunnel needs
support, beyond that which is required at the mouth, because at that
spot there is not yet solid rock; if the vein is soft, and the hanging
and footwall rock are likewise soft, the tunnel requires frequent strong
timbering, which is provided in the following way. First, two dressed
posts are erected and set into the tunnel floor, which is dug out a
little; these are of medium thickness, and high enough that their ends,
which are cut square, almost touch the top of the tunnel; then upon them
is placed a smaller dressed cap, which is mortised into the heads of the
posts; at the bottom, other small timbers, whose ends are similarly
squared, are mortised into the posts. At each interval of one and a half
fathoms, one of these sets is erected; each one of these the miners call
a "little doorway," because it opens a certain amount of passage way;
and indeed, when necessity requires it, doors are fixed to the timbers
of each little doorway so that it can be closed. Then lagging of planks
or of poles is placed upon the caps lengthwise, so as to reach from one
set of timbers to another, and is laid along the sides, in case some
portion of the body of the mountain may fall, and by its bulk impede
passage or crush persons coming in or out. Moreover, to make the timbers
remain stationary, wooden pegs are driven between them and the sides of
the tunnel. Lastly, if rock or earth are carried out in wheelbarrows,
planks joined together are laid upon the sills; if the rock is hauled
out in trucks, then two timbers three-quarters of a foot thick and wide
are laid on the sills, and, where they join, these are usually hollowed
out so that in the hollow, as in a road, the iron pin of the truck may
be pushed along; indeed, because of this pin in the groove, the truck
does not leave the worn track to the left or right. Beneath the sills
are the drains through which the water flows away.

Miners timber drifts in the same way as tunnels. These do not, however,
require sill-pieces, or drains; for the broken rock is not hauled very
far, nor does the water have far to flow. If the vein above is
metal-bearing, as it sometimes is for a distance of several fathoms,
then from the upper part of tunnels or even drifts that have already
been driven, other drifts are driven again and again until that part of
the vein is reached which does not yield metal. The timbering of these
openings is done as follows: stulls are set at intervals into hitches in
the hanging and footwall, and upon them smooth poles are laid
continuously; and that they may be able to bear the weight, the stulls
are generally a foot and a half thick. After the ore has been taken out
and the mining of the vein is being done elsewhere, the rock then
broken, especially if it cannot be taken away without great difficulty,
is thrown into these openings among the timber, and the carriers of the
ore are saved toil, and the owners save half the expense. This then,
generally speaking, is the method by which everything relating to the
timbering of shafts, tunnels, and drifts is carried out.

All that I have hitherto written is in part peculiar to _venae
profundae_, and in part common to all kinds of veins; of what follows,
part is specially applicable to _venae dilatatae_, part to _venae
cumulatae_. But first I will describe how _venae dilatatae_ should be
mined. Where torrents, rivers, or streams have by inundations washed
away part of the slope of a mountain or a hill, and have disclosed a
_vena dilatata_, a tunnel should be driven first straight and narrow,
and then wider, for nearly all the vein should be hewn away; and when
this tunnel has been driven further, a shaft which supplies air should
be sunk in the mountain or hill, and through it from time to time the
ore, earth, and rock can be drawn up at less expense than if they be
drawn out through the very great length of the tunnel; and even in those
places to which the tunnel does not yet reach, miners dig shafts in
order to open a _vena dilatata_ which they conjecture must lie beneath
the soil. In this way, when the upper layers are removed, they dig
through rock sometimes of one kind and colour, sometimes of one kind but
different colours, sometimes of different kinds but of one colour, and,
lastly, of different kinds and different colours. The thickness of rock,
both of each single stratum and of all combined, is uncertain, for the
whole of the strata are in some places twenty fathoms deep, in others
more than fifty; individual strata are in some places half a foot thick;
in others, one, two, or more feet; in others, one, two, three, or more
fathoms. For example, in those districts which lie at the foot of the
Harz mountains, there are many different coloured strata, covering a
copper _vena dilatata_. When the soil has been stripped, first of all is
disclosed a stratum which is red, but of a dull shade and of a thickness
of twenty, thirty, or five and thirty fathoms. Then there is another
stratum, also red, but of a light shade, which has usually a thickness
of about two fathoms. Beneath this is a stratum of ash-coloured clay
nearly a fathom thick, which, although it is not metalliferous, is
reckoned a vein. Then follows a third stratum, which is ashy, and about
three fathoms thick. Beneath this lies a vein of ashes to the thickness
of five fathoms, and these ashes are mixed with rock of the same colour.
Joined to the last, and underneath, comes a stratum, the fourth in
number, dark in colour and a foot thick. Under this comes the fifth
stratum, of a pale or yellowish colour, two feet thick; underneath
which is the sixth stratum, likewise dark, but rough and three feet
thick. Afterward occurs the seventh stratum, likewise of dark colour,
but still darker than the last, and two feet thick. This is followed by
an eighth stratum, ashy, rough, and a foot thick. This kind, as also the
others, is sometimes distinguished by stringers of the stone which
easily melts in fire of the second order. Beneath this is another ashy
rock, light in weight, and five feet thick. Next to this comes a lighter
ash-coloured one, a foot thick; beneath this lies the eleventh stratum,
which is dark and very much like the seventh, and two feet thick. Below
the last is a twelfth stratum of a whitish colour and soft, also two
feet thick; the weight of this rests on a thirteenth stratum, ashy and
one foot thick, whose weight is in turn supported by a fourteenth
stratum, which is blackish and half a foot thick. There follows this,
another stratum of black colour, likewise half a foot thick, which is
again followed by a sixteenth stratum still blacker in colour, whose
thickness is also the same. Beneath this, and last of all, lies the
cupriferous stratum, black coloured and schistose, in which there
sometimes glitter scales of gold-coloured pyrites in the very thin
sheets, which, as I said elsewhere, often take the forms of various
living things.[15]

The miners mine out a _vena dilatata_ laterally and longitudinally by
driving a low tunnel in it, and if the nature of the work and place
permit, they sink also a shaft in order to discover whether there is a
second vein beneath the first one; for sometimes beneath it there are
two, three, or more similar metal-bearing veins, and these are excavated
in the same way laterally and longitudinally. They generally mine _venae
dilatatae_ lying down; and to avoid wearing away their clothes and
injuring their left shoulders they usually bind on themselves small
wooden cradles. For this reason, this particular class of miners, in
order to use their iron tools, are obliged to bend their necks to the
left, not infrequently having them twisted. Now these veins also
sometimes divide, and where these parts re-unite, ore of a richer and a
better quality is generally found; the same thing occurs where the
stringers, of which they are not altogether devoid, join with them, or
cut them crosswise, or divide them obliquely. To prevent a mountain or
hill, which has in this way been undermined, from subsiding by its
weight, either some natural pillars and arches are left, on which the
pressure rests as on a foundation, or timbering is done for support.
Moreover, the materials which are dug out and which are devoid of metal
are removed in bowls, and are thrown back, thus once more filling the
caverns.

Next, as to _venae cumulatae_. These are dug by a somewhat different
method, for when one of these shows some metal at the top of the ground,
first of all one shaft is sunk; then, if it is worth while, around this
one many shafts are sunk and tunnels are driven into the mountain. If a
torrent or spring has torn fragments of metal from such a vein, a tunnel
is first driven into the mountain or hill for the purpose of searching
for the ore; then when it is found, a vertical shaft is sunk in it.
Since the whole mountain, or more especially the whole hill, is
undermined, seeing that the whole of it is composed of ore, it is
necessary to leave the natural pillars and arches, or the place is
timbered. But sometimes when a vein is very hard it is broken by fire,
whereby it happens that the soft pillars break up, or the timbers are
burnt away, and the mountain by its great weight sinks into itself, and
then the shaft buildings are swallowed up in the great subsidence.
Therefore, about a _vena cumulata_ it is advisable to sink some shafts
which are not subject to this kind of ruin, through which the materials
that are excavated may be carried out, not only while the pillars and
underpinnings still remain whole and solid, but also after the supports
have been destroyed by fire and have fallen. Since ore which has thus
fallen must necessarily be broken by fire, new shafts through which the
smoke can escape must be sunk in the abyss. At those places where
stringers intersect, richer ore is generally obtained from the mine;
these stringers, in the case of tin mines, sometimes have in them black
stones the size of a walnut. If such a vein is found in a plain, as not
infrequently happens in the case of iron, many shafts are sunk, because
they cannot be sunk very deep. The work is carried on by this method
because the miners cannot drive a tunnel into a level plain of this
kind.

There remain the stringers in which gold alone is sometimes found, in
the vicinity of rivers and streams, or in swamps. If upon the soil being
removed, many of these are found, composed of earth somewhat baked and
burnt, as may sometimes be seen in clay pits, there is some hope that
gold may be obtained from them, especially if several join together. But
the very point of junction must be pierced, and the length and width
searched for ore, and in these places very deep shafts cannot be sunk.

I have completed one part of this book, and now come to the other, in
which I will deal with the art of surveying. Miners measure the solid
mass of the mountains in order that the owners may lay out their plans,
and that their workmen may not encroach on other people's possessions.
The surveyor either measures the interval not yet wholly dug through,
which lies between the mouth of a tunnel and a shaft to be sunk to that
depth, or between the mouth of a shaft and the tunnel to be driven to
that spot which lies under the shaft, or between both, if the tunnel is
neither so long as to reach to the shaft, nor the shaft so deep as to
reach to the tunnel; and thus on both sides work is still to be done. Or
in some cases, within the tunnels and drifts, are to be fixed the
boundaries of the meers, just as the _Bergmeister_ has determined the
boundaries of the same meers above ground.[16]

Each method of surveying depends on the measuring of triangles. A small
triangle should be laid out, and from it calculations must be made
regarding a larger one. Most particular care must be taken that we do
not deviate at all from a correct measuring; for if, at the beginning,
we are drawn by carelessness into a slight error, this at the end will
produce great errors. Now these triangles are of many shapes, since
shafts differ among themselves and are not all sunk by one and the same
method into the depths of the earth, nor do the slopes of all mountains
come down to the valley or plain in the same manner. For if a shaft is
vertical, there is a triangle with a right angle, which the Greeks call
[Greek: orthogonion] and this, according to the inequalities of the
mountain slope, has either two equal sides or three unequal sides. The
Greeks call the former [Greek: trigonon isoskeles] the latter [Greek:
skalenon] for a right angle triangle cannot have three equal sides. If a
shaft is inclined and sunk in the same vein in which the tunnel is
driven, a triangle is likewise made with a right angle, and this again,
according to the various inequalities of the mountain slope, has either
two equal or three unequal sides. But if a shaft is inclined and is sunk
in one vein, and a tunnel is driven in another vein, then a triangle
comes into existence which has either an obtuse angle or all acute
angles. The former the Greeks call [Greek: amblygonion], the latter
[Greek: oxygonion]. That triangle which has an obtuse angle cannot have
three equal sides, but in accordance with the different mountain slopes
has either two equal sides or three unequal sides. That triangle which
has all acute angles in accordance with the different mountain slopes
has either three equal sides, which the Greeks call [Greek: trigonon
isopleuron] or two equal sides or three unequal sides.

The surveyor, as I said, employs his art when the owners of the mines
desire to know how many fathoms of the intervening ground require to be
dug; when a tunnel is being driven toward a shaft and does not yet reach
it; or when the shaft has not yet been sunk to the depth of the bottom
of the tunnel which is under it; or when neither the tunnel reaches to
that point, nor has the shaft been sunk to it. It is of importance that
miners should know how many fathoms remain from the tunnel to the shaft,
or from the shaft to the tunnel, in order to calculate the expenditure;
and in order that the owners of a metal-bearing mine may hasten the
sinking of a shaft and the excavation of the metal, before the tunnel
reaches that point and the tunnel owners excavate part of the metal by
any right of their own; and on the other hand, it is important that the
owners of a tunnel may similarly hasten their driving before a shaft can
be sunk to the depth of a tunnel, so that they may excavate the metal to
which they will have a right.

[Illustration 131 (Surveying): A--Upright forked posts. B--Pole over the
posts. C--Shaft. D--First cord. E--Weight of first cord. F--Second cord.
G--Same fixed ground. H--Head of first cord. I--Mouth of tunnel.
K--Third cord. L--Weight of third cord. M--First side minor triangle.
N--Second side minor triangle. O--Third side minor triangle. P--The
minor triangle.]

The surveyor, first of all, if the beams of the shaft-house do not give
him the opportunity, sets a pair of forked posts by the sides of the
shaft in such a manner that a pole may be laid across them. Next, from
the pole he lets down into the shaft a cord with a weight attached to
it. Then he stretches a second cord, attached to the upper end of the
first cord, right down along the slope of the mountain to the bottom of
the mouth of the tunnel, and fixes it to the ground. Next, from the same
pole not far from the first cord, he lets down a third cord, similarly
weighted, so that it may intersect the second cord, which descends
obliquely. Then, starting from that point where the third cord cuts the
second cord which descends obliquely to the mouth of the tunnel, he
measures the second cord upward to where it reaches the end of the
first cord, and makes a note of this first side of the minor
triangle[17]. Afterward, starting again from that point where the third
cord intersects the second cord, he measures the straight space which
lies between that point and the opposite point on the first cord, and in
that way forms the minor triangle, and he notes this second side of the
minor triangle in the same way as before. Then, if it is necessary, from
the angle formed by the first cord and the second side of the minor
triangle, he measures upward to the end of the first cord and also makes
a note of this third side of the minor triangle. The third side of the
minor triangle, if the shaft is vertical or inclined and is sunk on the
same vein in which the tunnel is driven, will necessarily be the same
length as the third cord above the point where it intersects the second
cord; and so, as often as the first side of the minor triangle is
contained in the length of the whole cord which descends obliquely, so
many times the length of the second side of the minor triangle indicates
the distance between the mouth of the tunnel and the point to which the
shaft must be sunk; and similarly, so many times the length of the third
side of the minor triangle gives the distance between the mouth of the
shaft and the bottom of the tunnel.

When there is a level bench on the mountain slope, the surveyor first
measures across this with a measuring-rod; then at the edges of this
bench he sets up forked posts, and applies the principle of the triangle
to the two sloping parts of the mountain; and to the fathoms which are
the length of that part of the tunnel determined by the triangles, he
adds the number of fathoms which are the width of the bench. But if
sometimes the mountain side stands up, so that a cord cannot run down
from the shaft to the mouth of the tunnel, or, on the other hand, cannot
run up from the mouth of the tunnel to the shaft, and, therefore, one
cannot connect them in a straight line, the surveyor, in order to fix an
accurate triangle, measures the mountain; and going downward he
substitutes for the first part of the cord a pole one fathom long, and
for the second part a pole half a fathom long. Going upward, on the
contrary, for the first part of the cord he substitutes a pole half a
fathom long, and for the next part, one a whole fathom long; then where
he requires to fix his triangle he adds a straight line to these angles.

[Illustration 133 (Surveying Triangle): A triangle having a right angle
and two equal sides.]

To make this system of measuring clear and more explicit, I will proceed
by describing each separate kind of triangle. When a shaft is vertical
or inclined, and is sunk in the same vein on which the tunnel is driven,
there is created, as I said, a triangle containing a right angle. Now if
the minor triangle has the two sides equal, which, in accordance with
the numbering used by surveyors, are the second and third sides, then
the second and third sides of the major triangle will be equal; and so
also the intervening distances will be equal which lie between the mouth
of the tunnel and the bottom of the shaft, and which lie between the
mouth of the shaft and the bottom of the tunnel. For example, if the
first side of the minor triangle is seven feet long and the second and
likewise the third sides are five feet, and the length shown by the
cord for the side of the major triangle is 101 times seven feet, that is
117 fathoms and five feet, then the intervening space, of course,
whether the whole of it has been already driven through or has yet to be
driven, will be one hundred times five feet, which makes eighty-three
fathoms and two feet. Anyone with this example of proportions will be
able to construct the major and minor triangles in the same way as I
have done, if there be the necessary upright posts and cross-beams. When
a shaft is vertical the triangle is absolutely upright; when it is
inclined and is sunk on the same vein in which the tunnel is driven, it
is inclined toward one side. Therefore, if a tunnel has been driven into
the mountain for sixty fathoms, there remains a space of ground to be
penetrated twenty-three fathoms and two feet long; for five feet of the
second side of the major triangle, which lies above the mouth of the
shaft and corresponds with the first side of the minor triangle, must
not be added. Therefore, if the shaft has been sunk in the middle of the
head meer, a tunnel sixty fathoms long will reach to the boundary of the
meer only when the tunnel has been extended a further two fathoms and
two feet; but if the shaft is located in the middle of an ordinary meer,
then the boundary will be reached when the tunnel has been driven a
further length of nine fathoms and two feet. Since a tunnel, for every
one hundred fathoms of length, rises in grade one fathom, or at all
events, ought to rise as it proceeds toward the shaft, one more fathom
must always be taken from the depth allowed to the shaft, and one added
to the length allowed to the tunnel. Proportionately, because a tunnel
fifty fathoms long is raised half a fathom, this amount must be taken
from the depth of the shaft and added to the length of the tunnel. In
the same way if a tunnel is one hundred or fifty fathoms shorter or
longer, the same proportion also must be taken from the depth of the one
and added to the length of the other. For this reason, in the case
mentioned above, half a fathom and a little more must be added to the
distance to be driven through, so that there remain twenty-three
fathoms, five feet, two palms, one and a half digits and a fifth of a
digit; that is, if even the minutest proportions are carried out; and
surveyors do not neglect these without good cause. Similarly, if the
shaft is seventy fathoms deep, in order that it may reach to the bottom
of the tunnel, it still must be sunk a further depth of thirteen fathoms
and two feet, or rather twelve fathoms and a half, one foot, two digits,
and four-fifths of half a digit. And in this instance five feet must be
deducted from the reckoning, because these five feet complete the third
side of the minor triangle, which is above the mouth of the shaft, and
from its depth there must be deducted half a fathom, two palms, one and
a half digits and the fifth part of half a digit. But if the tunnel has
been driven to a point where it is under the shaft, then to reach the
roof of the tunnel the shaft must still be sunk a depth of eleven
fathoms, two and a half feet, one palm, two digits, and four-fifths of
half a digit.

[Illustration 134 (Surveying Triangle): A triangle having a right angle
and three unequal sides.]

If a minor triangle is produced of the kind having three unequal sides,
then the sides of the greater triangle cannot be equal; that is, if the
first side of the minor triangle is eight feet long, the second six feet
long, and the third five feet long, and the cord along the side of the
greater triangle, not to go too far from the example just given, is one
hundred and one times eight feet, that is, one hundred and thirty-four
fathoms and four feet, the distance which lies between the mouth of the
tunnel and the bottom of the shaft will occupy one hundred times six
feet in length, that is, one hundred fathoms. The distance between the
mouth of the shaft and the bottom of the tunnel is one hundred times
five feet, that is, eighty-three fathoms and two feet. And so, if the
tunnel is eighty-five fathoms long, the remainder to be driven into the
mountain is fifteen fathoms long, and here, too, a correction in
measurement must be taken from the depth of the shaft and added to the
length of the tunnel; what this is precisely, I will pursue no further,
since everyone having a small knowledge of arithmetic can work it out.
If the shaft is sixty-seven fathoms deep, in order that it may reach the
bottom of the tunnel, the further distance required to be sunk amounts
to sixteen fathoms and two feet.

[Illustration 135a (Surveying Triangle): Triangle having an obtuse angle
and two equal sides.]

The surveyor employs this same method in measuring the mountain, whether
the shaft and tunnel are on one and the same vein, whether the vein is
vertical or inclined, or whether the shaft is on the principal vein and
the tunnel on a transverse vein descending vertically to the depths of
the earth; in the latter case the excavation is to be made where the
transverse vein cuts the vertical vein. If the principal vein descends
on an incline and the cross-vein descends vertically, then a minor
triangle is created having one obtuse angle or all three angles acute.
If the minor triangle has one angle obtuse and the two sides which are
the second and third are equal, then the second and third sides of the
major triangle will be equal, so that if the first side of the minor
triangle is nine feet, the second, and likewise the third, will be five
feet. Then the first side of the major triangle will be one hundred and
one times nine feet, or one hundred and fifty-one and one-half fathoms,
and each of the other sides of the major triangle will be one hundred
times five feet, that is, eighty-three fathoms and two feet. But when
the first shaft is inclined, generally speaking, it is not deep; but
there are usually several, all inclined, and one always following the
other. Therefore, if a tunnel is seventy-seven fathoms long, it will
reach to the middle of the bottom of a shaft when six fathoms and two
feet further have been sunk. But if all such inclined shafts are
seventy-six fathoms deep, in order that the last one may reach the
bottom of the tunnel, a depth of seven fathoms and two feet remains to
be sunk.

[Illustration 135b (Surveying Triangle): Triangle having an obtuse angle
and three unequal sides.]

If a minor triangle is made which has an obtuse angle and three unequal
sides, then again the sides of the large triangle cannot be equal. For
example, if the first side of the minor triangle is six feet long, the
second three feet, and the third four feet, and the cord along the side
of the greater triangle one hundred and one times six feet, that is, one
hundred and one fathoms, the distance between the mouth of the tunnel
and the bottom of the last shaft will be a length one hundred times
three feet, or fifty fathoms; but the depth that lies between the mouth
of the first shaft and the bottom of the tunnel is one hundred times
four feet, or sixty-six fathoms and four feet. Therefore, if a tunnel is
forty-four fathoms long, the remaining distance to be driven is six
fathoms. If the shafts are fifty-eight fathoms deep, the newest will
touch the bottom of the tunnel when eight fathoms and four feet have
been sunk.

[Illustration 136a (Surveying Triangle): A triangle having all its
angles acute and its three sides equal.]

If a minor triangle is produced which has all its angles acute and its
three sides equal, then necessarily the second and third sides of the
minor triangle will be equal, and likewise the sides of the major
triangle frequently referred to will be equal. Thus if each side of the
minor triangle is six feet long, and the cord measurement for the side
of the major triangle is one hundred and one times six feet, that is,
one hundred and one fathoms, then both the distances to be dug will be
one hundred fathoms. And thus if the tunnel is ninety fathoms long, it
will reach the middle of the bottom of the last shaft when ten fathoms
further have been driven. If the shafts are ninety-five fathoms deep,
the last will reach the bottom of the tunnel when it is sunk a further
depth of five fathoms.

[Illustration 136b (Surveying Triangle): Triangle having all its angles
acute and two sides equal, A, B, unequal side C.]

If a triangle is made which has all its angles acute, but only two sides
equal, namely, the first and third, then the second and third sides are
not equal; therefore the distances to be dug cannot be equal. For
example, if the first side of the minor triangle is six feet long, and
the second is four feet, and the third is six feet, and the cord
measurement for the side of the major triangle is one hundred and one
times six feet, that is, one hundred and one fathoms, then the distance
between the mouth of the tunnel and the bottom of the last shaft will be
sixty-six fathoms and four feet. But the distance from the mouth of the
first shaft to the bottom of the tunnel is one hundred fathoms. So if
the tunnel is sixty fathoms long, the remaining distance to be driven
into the mountain is six fathoms and four feet. If the shaft is
ninety-seven fathoms deep, the last one will reach the bottom of the
tunnel when a further depth of three fathoms has been sunk.

[Illustration 137 (Surveying Triangle): A triangle having all its angles
acute and its three sides unequal.]

If a minor triangle is produced which has all its angles acute, but its
three sides unequal, then again the distances to be dug cannot be equal.
For example, if the first side of the minor triangle is seven feet long,
the second side is four feet, and the third side is six feet, and the
cord measurement for the side of the major triangle is one hundred and
one times seven feet or one hundred and seventeen fathoms and four feet,
the distance between the mouth of the tunnel and the bottom of the last
shaft will be four hundred feet or sixty-six fathoms, and the depth
between the mouth of the first shaft and the bottom of the tunnel will
be one hundred fathoms. Therefore, if a tunnel is fifty fathoms long, it
will reach the middle of the bottom of the newest shaft when it has been
driven sixteen fathoms and four feet further. But if the shafts are then
ninety-two fathoms deep, the last shaft will reach the bottom of the
tunnel when it has been sunk a further eight fathoms.

This is the method of the surveyor in measuring the mountain, if the
principal vein descends inclined into the depths of the earth or the
transverse vein is vertical. But if they are both inclined, the surveyor
uses the same method, or he measures the slope of the mountain
separately from the slope of the shaft. Next, if a transverse vein in
which a tunnel is driven does not cut the principal vein in that spot
where the shaft is sunk, then it is necessary for the starting point of
the survey to be in the other shaft in which the transverse vein cuts
the principal vein. But if there be no shaft on that spot where the
outcrop of the transverse vein cuts the outcrop of the principal vein,
then the surface of the ground which lies between the shafts must be
measured, or that between the shaft and the place where the outcrop of
the one vein intersects the outcrop of the other.

[Illustration 138 (Hemicycle): A--Waxed semicircle of the hemicycle.
B--Semicircular lines. C--Straight lines. D--Line measuring the half.
E--Line measuring the whole. F--Tongue.]

[Illustration 138A (Surveying Rods): A--Lines of the rod which separate
minor spaces. B--Lines of the rod which separate major spaces.]

Some surveyors, although they use three cords, nevertheless ascertain
only the length of a tunnel by that method of measuring, and determine
the depth of a shaft by another method; that is, by the method by which
cords are re-stretched on a level part of the mountain or in a valley,
or in flat fields, and are measured again. Some, however, do not employ
this method in surveying the depth of a shaft and the length of a
tunnel, but use only two cords, a graduated hemicycle[18] and a rod half
a fathom long. They suspend in the shaft one cord, fastened from the
upper pole and weighted, just as the others do. Fastened to the upper
end of this cord, they stretch another right down the slope of the
mountain to the bottom of the mouth of the tunnel and fix it to the
ground. Then to the upper part of this second cord they apply on its
lower side the broad part of a hemicycle. This consists of half a
circle, the outer margin of which is covered with wax, and within this
are six semi-circular lines. From the waxed margin through the first
semi-circular line, and reaching to the second, there proceed straight
lines converging toward the centre of the hemicycle; these mark the
middles of intervening spaces lying between other straight lines which
extend to the fourth semi-circular line. But all lines whatsoever, from
the waxed margin up to the fourth line, whether they go beyond it or
not, correspond with the graduated lines which mark the minor spaces of
a rod. Those which go beyond the fourth line correspond with the lines
marking the major spaces on the rod, and those which proceed further,
mark the middle of the intervening space which lies between the others.
The straight lines, which run from the fifth to the sixth semi-circular
line, show nothing further. Nor does the line which measures the half,
show anything when it has already passed from the sixth straight line to
the base of the hemicycle. When the hemicycle is applied to the cord, if
its tongue indicates the sixth straight line which lies between the
second and third semi-circular lines, the surveyor counts on the rod six
lines which separate the minor spaces, and if the length of this portion
of the rod be taken from the second cord, as many times as the cord
itself is half-fathoms long, the remaining length of cord shows the
distance the tunnel must be driven to reach under the shaft. But if he
sees that the tongue has gone so far that it marks the sixth line
between the fourth and fifth semi-circular lines, he counts six lines
which separate the major spaces on the rod; and this entire space is
deducted from the length of the second cord, as many times as the number
of whole fathoms which the cord contains; and then, in like manner, the
remaining length of cord shows us the distance the tunnel must be driven
to reach under the shaft.[19]

[Illustration 139 (Surveying Triangle): Stretched cords: A--First cord.
B--Second cord. C--Third cord. D--Triangle.]

Both these surveyors, as well as the others, in the first place make
use of the haulage rope. These they measure by means of others made of
linden bark, because the latter do not stretch at all, while the former
become very slack. These cords they stretch on the surveyor's field, the
first one to represent the parts of mountain slopes which descend
obliquely. Then the second cord, which represents the length of the
tunnel to be driven to reach the shaft, they place straight, in such a
direction that one end of it can touch the lower end of the first cord;
then they similarly lay the third cord straight, and in such a direction
that its upper end may touch the upper end of the first cord, and its
lower end the other extremity of the second cord, and thus a triangle is
formed. This third cord is measured by the instrument with the index, to
determine its relation to the perpendicular; and the length of this cord
shows the depth of the shaft.

[Illustration 140 (Surveying Triangles): Stretched cords: A--First.
B--Second. B--Third. C--Fourth. C--Fifth. D--Quadrangle.]

Some surveyors, to make their system of measuring the depth of a shaft
more certain, use five stretched cords: the first one descending
obliquely; two, that is to say the second and third, for ascertaining
the length of the tunnel; two for the depth of the shaft; in which way
they form a quadrangle divided into two equal triangles, and this tends
to greater accuracy.

These systems of measuring the depth of a shaft and the length of a
tunnel, are accurate when the vein and also the shaft or shafts go down
to the tunnel vertically or inclined, in an uninterrupted course. The
same is true when a tunnel runs straight on to a shaft. But when each of
them bends now in this, now in that direction, if they have not been
completely driven and sunk, no living man is clever enough to judge how
far they are deflected from a straight course. But if the whole of
either one of the two has been excavated its full distance, then we can
estimate more easily the length of one, or the depth of the other; and
so the location of the tunnel, which is below a newly-started shaft, is
determined by a method of surveying which I will describe. First of all
a tripod is fixed at the mouth of the tunnel, and likewise at the mouth
of the shaft which has been started, or at the place where the shaft
will be started. The tripod is made of three stakes fixed to the ground,
a small rectangular board being placed upon the stakes and fixed to
them, and on this is set a compass. Then from the lower tripod a
weighted cord is let down perpendicularly to the earth, close to which
cord a stake is fixed in the ground. To this stake another cord is tied
and drawn straight into the tunnel to a point as far as it can go
without being bent by the hangingwall or the footwall of the vein. Next,
from the cord which hangs from the lower tripod, a third cord likewise
fixed is brought straight up the sloping side of the mountain to the
stake of the upper tripod, and fastened to it. In order that the
measuring of the depth of the shaft may be more certain, the third cord
should touch one and the same side of the cord hanging from the lower
tripod which is touched by the second cord--the one which is drawn into
the tunnel. All this having been correctly carried out, the surveyor,
when at length the cord which has been drawn straight into the tunnel is
about to be bent by the hangingwall or footwall, places a plank in the
bottom of the tunnel and on it sets the orbis, an instrument which has
an indicator peculiar to itself. This instrument, although it also has
waxed circles, differs from the other, which I have described in the
third book. But by both these instruments, as well as by a rule and a
square, he determines whether the stretched cords reach straight to the
extreme end of the tunnel, or whether they sometimes reach straight, and
are sometimes bent by the footwall or hangingwall. Each instrument is
divided into parts, but the compass into twenty-four parts, the orbis
into sixteen parts; for first of all it is divided into four principal
parts, and then each of these is again divided into four. Both have
waxed circles, but the compass has seven circles, and the orbis only
five circles. These waxed circles the surveyor marks, whichever
instrument he uses, and by the succession of these same marks he notes
any change in the direction in which the cord extends. The orbis has an
opening running from its outer edge as far as the centre, into which
opening he puts an iron screw, to which he binds the second cord, and by
screwing it into the plank, fixes it so that the orbis may be immovable.
He takes care to prevent the second cord, and afterward the others which
are put up, from being pulled off the screw, by employing a heavy iron,
into an opening of which he fixes the head of the screw. In the case of
the compass, since it has no opening, he merely places it by the side of
the screw. That the instrument does not incline forward or backward, and
in that way the measurement become a greater length than it should be,
he sets upon the instrument a standing plummet level, the tongue of
which, if the instrument is level, indicates no numbers, but the point
from which the numbers start.

[Illustration 142 (Compass): Compass. A, B, C, D, E, F, G are the seven
waxed circles.]

[Illustration 142A (Orbis): A, B, C, D, E--Five waxed circles of the
_orbis_. F--Opening of same. G--Screw. H--Perforated iron.]

[Illustration 143 (Miner using level): A--Standing plummet level.
B--Tongue. C--Level and tongue.]

When the surveyor has carefully observed each separate angle of the
tunnel and has measured such parts as he ought to measure, then he lays
them out in the same way on the surveyor's field[20] in the open air,
and again no less carefully observes each separate angle and measures
them. First of all, to each angle, according as the calculation of his
triangle and his art require it, he lays out a straight cord as a line.
Then he stretches a cord at such an angle as represents the slope of
the mountain, so that its lower end may reach the end of the straight
cord; then he stretches a third cord similarly straight and at such an
angle, that with its upper end it may reach the upper end of the second
cord, and with its lower end the last end of the first cord. The length
of the third cord shows the depth of the shaft, as I said before, and at
the same time that point on the tunnel to which the shaft will reach
when it has been sunk.

If one or more shafts reach the tunnel through intermediate drifts and
shafts, the surveyor, starting from the nearest which is open to the
air, measures in a shorter time the depth of the shaft which requires to
be sunk, than if he starts from the mouth of the tunnel. First of all he
measures that space on the surface which lies between the shaft which
has been sunk and the one which requires to be sunk. Then he measures
the incline of all the shafts which it is necessary to measure, and the
length of all the drifts with which they are in any way connected to the
tunnel. Lastly, he measures part of the tunnel; and when all this is
properly done, he demonstrates the depth of the shaft and the point in
the tunnel to which the shaft will reach. But sometimes a very deep
straight shaft requires to be sunk at the same place where there is a
previous inclined shaft, and to the same depth, in order that loads may
be raised and drawn straight up by machines. Those machines on the
surface are turned by horses; those inside the earth, by the same means,
and also by water-power. And so, if it becomes necessary to sink such a
shaft, the surveyor first of all fixes an iron screw in the upper part
of the old shaft, and from the screw he lets down a cord as far as the
first angle, where again he fixes a screw, and again lets down the cord
as far as the second angle; this he repeats again and again until the
cord reaches to the bottom of the shaft. Then to each angle of the cord
he applies a hemicycle, and marks the waxed semi-circle according to the
lines which the tongue indicates, and designates it by a number, in case
it should be moved; then he measures the separate parts of the cord with
another cord made of linden bark. Afterward, when he has come back out
of the shaft, he goes away and transfers the markings from the waxed
semi-circle of the hemicycle to an orbis similarly waxed. Lastly, the
cords are stretched on the surveyor's field, and he measures the angles,
as the system of measuring by triangles requires, and ascertains which
part of the footwall and which part of the hangingwall rock must be cut
away in order that the shaft may descend straight. But if the surveyor
is required to show the owners of the mine, the spot in a drift or a
tunnel in which a shaft needs to be raised from the bottom upward, that
it should cut through more quickly, he begins measuring from the bottom
of the drift or tunnel, at a point beyond the spot at which the bottom
of the shaft will arrive, when it has been sunk. When he has measured
the part of the drift or tunnel up to the first shaft which connects
with an upper drift, he measures the incline of this shaft by applying a
hemicycle or orbis to the cord. Then in a like manner he measures the
upper drift and the incline shaft which is sunk therein toward which a
raise is being dug, then again all the cords are stretched in the
surveyor's field, the last cord in such a way that it reaches the first,
and then he measures them. From this measurement is known in what part
of the drift or tunnel the raise should be made, and how many fathoms
of vein remain to be broken through in order that the shaft may be
connected.

I have described the first reason for surveying; I will now describe
another. When one vein comes near another, and their owners are
different persons who have late come into possession, whether they drive
a tunnel or a drift, or sink a shaft, they may encroach, or seem to
encroach, without any lawful right, upon the boundaries of the older
owners, for which reason the latter very often seek redress, or take
legal proceedings. The surveyor either himself settles the dispute
between the owners, or by his art gives evidence to the judges for
making their decision, that one shall not encroach on the mine of the
other. Thus, first of all he measures the mines of each party with a
basket rope and cords of linden bark; and having applied to the cords an
orbis or a compass, he notes the directions in which they extend. Then
he stretches the cords on the surveyor's field; and starting from that
point whose owners are in possession of the old meer toward the other,
whether it is in the hanging or footwall of the vein, he stretches a
cross-cord in a straight line, according to the sixth division of the
compass, that is, at a right angle to the vein, for a distance of three
and a half fathoms, and assigns to the older owners that which belongs
to them. But if both ends of one vein are being dug out in two tunnels,
or drifts from opposite directions, the surveyor first of all considers
the lower tunnel or drift and afterward the upper one, and judges how
much each of them has risen little by little. On each side strong men
take in their hands a stretched cord and hold it so that there is no
point where it is not strained tight; on each side the surveyor supports
the cord with a rod half a fathom long, and stays the rod at the end
with a short stick as often as he thinks it necessary. But some fasten
cords to the rods to make them steadier. The surveyor attaches a
suspended plummet level to the middle of the cord to enable him to
calculate more accurately on both sides, and from this he ascertains
whether one tunnel has risen more than another, or in like manner one
drift more than another. Afterward he measures the incline of the shafts
on both sides, so that he can estimate their position on each side. Then
he easily sees how many fathoms remain in the space which must be broken
through. But the grade of each tunnel, as I said, should rise one fathom
in the distance of one hundred fathoms.

[Illustration 146 (Plummet cord and weight): Indicator of a suspended
plummet level.]

[Illustration 147 (Compass): A--Needle of the instrument. B--Its tongue.
C, D, E--Holes in the tongue.]

The Swiss surveyors, when they wish to measure tunnels driven into the
highest mountains, also use a rod half a fathom long, but composed of
three parts, which screw together, so that they may be shortened. They
use a cord made of linden bark to which are fastened slips of paper
showing the number of fathoms. They also employ an instrument peculiar
to them, which has a needle; but in place of the waxed circles they
carry in their hands a chart on which they inscribe the readings of the
instrument. The instrument is placed on the back part of the rod so that
the tongue, and the extended cord which runs through the three holes in
the tongue, demonstrates the direction, and they note the number of
fathoms. The tongue shows whether the cord inclines forward or backward.
The tongue does not hang, as in the case of the suspended plummet
level, but is fixed to the instrument in a half-lying position. They
measure the tunnels for the purpose of knowing how many fathoms they
have been increased in elevation; how many fathoms the lower is distant
from the upper one; how many fathoms of interval is not yet pierced
between the miners who on opposite sides are digging on the same vein,
or cross-stringers, or two veins which are approaching one another.

But I return to our mines. If the surveyor desires to fix the boundaries
of the meer within the tunnels or drifts, and mark to them with a sign
cut in the rock, in the same way that the _Bergmeister_ has marked these
boundaries above ground, he first of all ascertains, by measuring in the
manner which I have explained above, which part of the tunnel or drift
lies beneath the surface boundary mark, stretching the cords along the
drifts to a point beyond that spot in the rock where he judges the mark
should be cut. Then, after the same cords have been laid out on the
surveyor's field, he starts from that upper cord at a point which shows
the boundary mark, and stretches another cross-cord straight downward
according to the sixth division of the compass--that is at a right
angle. Then that part of the lowest cord which lies beyond the part to
which the cross-cord runs being removed, it shows at what point the
boundary mark should be cut into the rock of the tunnel or drift. The
cutting is made in the presence of the two Jurors and the manager and
the foreman of each mine. For as the _Bergmeister_ in the presence of
these same persons sets the boundary stones on the surface, so the
surveyor cuts in the rock a sign which for this reason is called the
boundary rock. If he fixes the boundary mark of a meer in which a shaft
has recently begun to be sunk on a vein, first of all he measures and
notes the incline of that shaft by the compass or by another way with
the applied cords; then he measures all the drifts up to that one in
whose rock the boundary mark has to be cut. Of these drifts he measures
each angle; then the cords, being laid out on the surveyor's field, in a
similar way he stretches a cross-cord, as I said, and cuts the sign on
the rock. But if the underground boundary rock has to be cut in a drift
which lies beneath the first drift, the surveyor starts from the mark in
the first drift, notes the different angles, one by one, takes his
measurements, and in the lower drift stretches a cord beyond that place
where he judges the mark ought to be cut; and then, as I said before,
lays out the cords on the surveyor's field. Even if a vein runs
differently in the lower drift from the upper one, in which the first
boundary mark has been cut in the rock, still, in the lower drift the
mark must be cut in the rock vertically beneath. For if he cuts the
lower mark obliquely from the upper one some part of the possession of
one mine is taken away to its detriment, and given to the other.
Moreover, if it happens that the underground boundary mark requires to
be cut in an angle, the surveyor, starting from that angle, measures one
fathom toward the front of the mine and another fathom toward the back,
and from these measurements forms a triangle, and dividing its middle by
a cross-cord, makes his cutting for the boundary mark.

Lastly, the surveyor sometimes, in order to make more certain, finds the
boundary of the meers in those places where many old boundary marks are
cut in the rock. Then, starting from a stake fixed on the surface, he
first of all measures to the nearest mine; then he measures one shaft
after another; then he fixes a stake on the surveyors' field, and making
a beginning from it stretches the same cords in the same way and
measures them, and again fixes in the ground a stake which for him will
signify the end of his measuring. Afterward he again measures
underground from that spot at which he left off, as many shafts and
drifts as he can remember. Then he returns to the surveyor's field, and
starting again from the second stake, makes his measurements; and he
does this as far as the drift in which the boundary mark must be cut in
the rock. Finally, commencing from the stake first fixed in the ground,
he stretches a cross-cord in a straight line to the last stake, and this
shows the length of the lowest drift. The point where they touch, he
judges to be the place where the underground boundary mark should be
cut.

     END OF BOOK V.


FOOTNOTES:

[1] It has been suggested that we should adopt throughout this volume
the mechanical and mining terms used in English mines at Agricola's
time. We believe, however, that but a little inquiry would illustrate
the undesirability of this course as a whole. Where there is choice in
modern miner's nomenclature between an old and a modern term, we have
leaned toward age, if it be a term generally understood. But except
where the subject described has itself become obsolete, we have revived
no obsolete terms. In substantiation of this view, we append a few
examples of terms which served the English miner well for centuries,
some of which are still extant in some local communities, yet we believe
they would carry as little meaning to the average reader as would the
reproduction of the Latin terms coined by Agricola.

  Rake     = A perpendicular vein.
  Woughs   = Walls of the vein.
  Shakes   = Cracks in the walls.
  Flookan  = Gouge.
  Bryle    = Outcrop.
  Hade     = Incline or underlay of the vein.
  Dawling  = Impoverishment of the vein.
  Rither   = A "horse" in a vein.
  Twitches = "Pinching" of a vein.
  Slough   = Drainage tunnel.
  Sole     = Lowest drift.
  Stool    = Face of a drift or stope.
  Winds }
  Turn  }  = Winze.
  Dippas}
  Grove    = Shaft.
  Dutins   = Set of timber.
  Stemple  = Post or stull.
  Laths    = Lagging.

As examples of the author's coinage and adaptations of terms in this
book we may cite:--

  _Fossa latens_                = Drift.
  _Fossa latens transversa_     = Crosscut.
  _Tectum_                      = Hangingwall.
  _Fundamentum_                 = Footwall.
  _Tigna per intervalla posita_ = Wall plate.
  _Arbores dissectae_           = Lagging.
  _Formae_                      = Hitches.

We have adopted the term "tunnel" for openings by way of outlet to the
mine. The word in this narrow sense is as old as "adit," a term less
expressive and not so generally used in the English-speaking mining
world. We have for the same reason adopted the word "drift" instead of
the term "level" so generally used in America, because that term always
leads to confusion in discussion of mine surveys. We may mention,
however, that the term "level" is a heritage from the Derbyshire mines,
and is of an equally respectable age as "drift."

[2] See note on p. 46-47. The _canales_, as here used, were the openings
in the earth, in which minerals were deposited.

[3] This statement, as will appear by the description later on, refers
to the depth of winzes or to the distance between drifts, that is "the
lift." We have not, however, been justified in using the term "winze,"
because some of these were openings to the surface. As showing the
considerable depth of shafts in Agricola's time, we may quote the
following from _Bermannus_ (p. 442): "The depths of our shafts forced us
to invent hauling machines suitable for them. There are some of them
larger and more ingenious than this one, for use in deep shafts, as, for
instance, those in my native town of Geyer, but more especially at
Schneeberg, where the shaft of the mine from which so much treasure was
taken in our memory has reached the depth of about 200 fathoms (feet?),
wherefore the necessity of this kind of machinery. _Naevius_: What an
enormous depth! Have you reached the Inferno? _Bermannus_: Oh, at
Kuttenberg there are shafts more than 500 fathoms (feet?) deep.
_Naevius_: And not yet reached the Kingdom of Pluto?" It is impossible
to accept these as fathoms, as this would in the last case represent
3,000 feet vertically. The expression used, however, for fathoms is
_passus_, presumably the Roman measure equal to 58.1 inches.

[4] _Cavernos_. The Glossary gives _drusen_, our word _drusy_ having had
this origin.

[5] _Purum_,--"pure." _Interpretatio_ gives the German as
_gedigen_,--"native."

[6] _Rudis_,--"Crude." By this expression the author really means ores
very rich in any designated metal. In many cases it serves to indicate
the minerals of a given metal, as distinguished from the metal itself.
Our system of mineralogy obviously does not afford an acceptable
equivalent. Agricola (_De Nat. Foss._, p. 360) says: "I find it
necessary to call each genus (of the metallic minerals) by the name of
its own metal, and to this I add a word which differentiates it from the
pure (_puro_) metal, whether the latter has been mined or smelted; so I
speak of _rudis_ gold, silver, quicksilver, copper, tin, bismuth, lead,
or iron. This is not because I am unaware that Varro called silver
_rudis_ which had not yet been refined and stamped, but because a word
which will distinguish the one from the other is not to be found."

[7] The reasons for retaining the Latin weights are given in the
Appendix on Weights and Measures. A _centumpondium_ weighs 70.6 lbs.
avoirdupois, an _uncia_ 412.2 Troy grains, therefore, this value is
equal to 72 ounces 18 pennyweights per short ton.

[8] Agricola mentions many minerals in _De Re Metallica_, but without
such description as would make possible a hazard at their identity. From
his _De Natura Fossilium_, however, and from other mineralogies of the
16th Century, some can be fully identified and others surmised. While we
consider it desirable to set out the probable composition of these
minerals, on account of the space required, the reasons upon which our
opinion has been based cannot be given in detail, as that would require
extensive quotations. In a general way, we have throughout the text
studiously evaded the use of modern mineralogical terms--unless the term
used to-day is of Agricola's age--and have adopted either old English
terms of pre-chemistry times or more loose terms used by common miners.
Obviously modern mineralogic terms imply a precision of knowledge not
existing at that period. It must not be assumed that the following is by
any means a complete list of the minerals described by Agricola, but
they include most of those referred to in this chapter. His system of
mineralogy we have set out in note 4, p. 1, and it requires no further
comment here. The grouping given below is simply for convenience and
does not follow Agricola's method. Where possible, we tabulate in
columns the Latin term used in _De Re Metallica_; the German equivalent
given by the Author in either the _Interpretatio_ or the Glossary; our
view of the probable modern equivalent based on investigation of his
other works and other ancient mineralogies, and lastly the terms we have
adopted in the text. The German spelling is that given in the original.
As an indication of Agricola's position as a mineralogist, we mark with
an asterisk the minerals which were first specifically described by him.
We also give some notes on matters of importance bearing on the
nomenclature used in _De Re Metallica_. Historical notes on the chief
metals will be found elsewhere, generally with the discussion of
smelting methods. We should not omit to express our indebtedness to
Dana's great "System of Mineralogy," in the matter of correlation of
many old and modern minerals.

GOLD MINERALS. Agricola apparently believed that there were various gold
minerals, green, yellow, purple, black, etc. There is nothing, however,
in his works that permits of any attempt to identify them, and his
classification seems to rest on gangue colours.

SILVER MINERALS.

  _Argentum purum in  _Gedigen silber_        --            *Native silver
    venis reperitur_

  _Argentum rude_     _Gedigen silber         --            _Rudis_ silver, or
                        ertz_                                 pure silver
                                                              minerals

  _Argentum rude      _Glas ertz_        Argentite          *Silver glance
    plumbei coloris_                      (Ag_{2}S)

  _Argentum rude      _Rot gold ertz_    Pyrargyrite        *Red silver
    rubrum_                               (Ag_{3}SbS_{3})

  _Argentum rude      _Durchsichtig      Proustite          *Ruby silver
    rubrum              rod gulden        (Ag_{3}AsS_{3})
    translucidum_       ertz_

  _Argentum rude      _Weis rod gulden        --            White silver
    album_              ertz: Dan es
                        ist frisch wie
                        offtmals rod
                        gulden ertz
                        pfleget zusein_

  _Argentum rude      _Gedigen           Part Bromyrite     Liver-coloured
    jecoris             leberfarbig        (Ag Br)           silver
    colore_             ertz_

  _Argentum rude      _Gedigen               --             Yellow silver
    luteum_             geelertz_

  _Argentum rude      _Gedigen graw    }                  { *Grey silver
    cineraceum_         ertz_          } Part Cerargurite {
                                       } (Ag Cl) (Horn    {
  _Argentum rude      _Gedigen         } Silver) Part     { *Black silver
    nigrum_            schwartz ertz_  } Stephanite       {
                                       } (Ag_{5}SbS_{4})  {
  _Argentum rude      _Gedigen braun   }                  { *Purple silver
    purpureum_          ertz_          }                  {

The last six may be in part also alteration products from all silver
minerals.

The reasons for indefiniteness in determination usually lie in the
failure of ancient authors to give sufficient or characteristic
descriptions. In many cases Agricola is sufficiently definite as to
assure certainty, as the following description of what we consider to be
silver glance, from _De Natura Fossilium_ (p. 360), will indicate:
"Lead-coloured _rudis_ silver is called by the Germans from the word
glass (_glasertz_), not from lead. Indeed, it has the colour of the
latter or of galena (_plumbago_), but not of glass, nor is it
transparent like glass, which one might indeed expect had the name been
correctly derived. This mineral is occasionally so like galena in
colour, although it is darker, that one who is not experienced in
minerals is unable to distinguish between the two at sight, but in
substance they differ greatly from one another. Nature has made this
kind of silver out of a little earth and much silver. Whereas galena
consists of stone and lead containing some silver. But the distinction
between them can be easily determined, for galena may be ground to
powder in a mortar with a pestle, but this treatment flattens out this
kind of _rudis_ silver. Also galena, when struck by a mallet or bitten
or hacked with a knife, splits and breaks to pieces; whereas this silver
is malleable under the hammer, may be dented by the teeth, and cut with
a knife."

COPPER MINERALS.

  _Aes purum          _Gedigen kupfer_   Native copper      Native copper
    fossile_

  _Aes rude           _Kupferglas ertz_  Chalcocite         *Copper glance
    plumbei                               (Cu_{2}S)
    coloris_

  _Chalcitis_         _Rodt atrament_    A decomposed       _Chalcitis_ (see
                                           copper or          notes on p. 573)
                                           iron sulphide

  _Pyrites aurei    } _Geelkis oder    { Part chalcopyrite  Copper pyrites
    colore_         }   kupferkis_     {  (Cu Fe S) part
                    }                  {  bornite
  _Pyrites aerosus_ }                  {  (Cu_{3}FeS_{3})

  _Caeruleum_         _Berglasur_        Azurite            Azure

  _Chrysocolla_       _Berggruen und    { Part chrysocolla   Chrysocolla (see
                        schifergruen_   { Part Malachite      note 7, p. 560)

  _Molochites_        _Molochit_         Malachite          Malachite

  _Lapis aerarius_    _Kupfer ertz_          --             Copper ore

  _Aes caldarium    } _Lebeter kupfer_  { When used for
    rubrum fuscum_  }                   {   an ore, is      *Ruby copper ore
         or         }                   {   probably
  _Aes sui coloris_ } _Rotkupfer_       {   cuprite

  _Aes nigrum_        _Schwartz kupfer_  Probably CuO from  *Black copper
                                           oxidation of
                                           other minerals

In addition to the above the Author uses the following, which were in
the main artificial products:

  _Aerugo_            _Gruenspan oder     Verdigris          Verdigris
                        Spanschgruen_

  _Aes luteum_        _Gelfarkupfer_   } Impure blister   { Unrefined copper
                                       }   copper         {  (see note 16,
                                       }                  {  p. 511)
  _Aes caldarium_     _Lebeterkupfer_  }                  {

  _Aeris flos_        _Kupferbraun_    } Cupric oxide     { Copper flower
                                       }   scales         {
                                       }                  {
  _Aeris squama_      _Kupferhammer-   }                  { Copper scale (see
                        schlag_        }                  {   note 9, p. 233)

  _Atramentum         _Blaw kupfer       Chalcanthite       Native blue
    sutorium            wasser_                               vitriol (see
    caeruleum_ or                                             note on p. 572)
    _chalcanthum_

Blue and green copper minerals were distinguished by all the ancient
mineralogists. Theophrastus, Dioscorides, Pliny, etc., all give
sufficient detail to identify their _cyanus_ and _caeruleum_ partly with
modern azurite, and their _chrysocolla_ partly with the modern mineral
of the same name. However, these terms were also used for vegetable
pigments, as well as for the pigments made from the minerals. The Greek
origin of _chrysocolla_ (_chrysos_, gold and _kolla_, solder) may be
blamed with another and distinct line of confusion, in that this term
has been applied to soldering materials, from Greek down to modern
times, some of the ancient mineralogists even asserting that the copper
mineral _chrysocolla_ was used for this purpose. Agricola uses
_chrysocolla_ for borax, but is careful to state in every case (see note
xx., p. x): "_Chrysocolla_ made from _nitrum_," or "_Chrysocolla_ which
the Moors call Borax." Dioscorides and Pliny mention substances which
were evidently copper sulphides, but no description occurs prior to
Agricola that permits a hazard as to different species.

LEAD MINERALS.

  _Plumbarius lapis_  _Glantz_           Galena             Galena

  _Galena_            _Glantz und        Galena             Galena
                        pleiertz_

  _Plumbum nigrum   } _Pleiertz oder     Cerussite          Yellow lead ore
    lutei coloris_  }   pleischweis_       (PbCO_{3})
                    }
  _Plumbago         }
    metallica_      }

  _Cerussa_           _Pleiweis_         Artificial         White-lead (see
                                           White-lead         note 4, p. 440)

  _Ochra facticia_    _Pleigeel_         Massicot (Pb O)    *Lead-ochre (see
    or _ochra                                                 note 8, p. 232)
    plumbaria_

  _Molybdaena_      } _Herdplei_         Part litharge      Hearth-lead (see
                    }                                         note 37, p. 476)
  _Plumbago         }
    fornacis_       }

  _Spuma argenti_   } _Glett_            Litharge           Litharge (see note
                    }                                         on p. 465)
  _Lithargyrum_     }

  _Minium             _Menning_          Minium             Red-lead (see note
    secundarium_                          (Pb_{3}O_{4})       7, p. 232)

So far as we can determine, all of these except the first three were
believed by Agricola to be artificial products. Of the first three,
galena is certain enough, but while he obviously was familiar with the
alteration lead products, his descriptions are inadequate and much
confused with the artificial oxides. Great confusion arises in the
ancient mineralogies over the terms _molybdaena_, _plumbago_, _plumbum_,
_galena_, and _spuma argenti_, all of which, from Roman mineralogists
down to a century after Agricola, were used for lead in some form.
Further discussion of such confusion will be found in note 37, p. 476.
Agricola in _Bermannus_ and _De Natura Fossilium_, devotes pages to
endeavouring to reconcile the ancient usages of these terms, and all the
confusion existing in Agricola's time was thrice confounded when the
names _molybdaena_ and _plumbago_ were assigned to non-lead minerals.

TIN. Agricola knew only one tin mineral: _Lapilli nigri ex quibus
conflatur plumbum candidum_, _i.e._, "Little black stones from which tin
is smelted," and he gives the German equivalent as _zwitter_,
"tin-stone." He describes them as being of different colours, but
probably due to external causes.

ANTIMONY. (_Interpretatio_,--_spiesglas_.) The _stibi_ or _stibium_ of
Agricola was no doubt the sulphide, and he follows Dioscorides in
dividing it into male and female species. This distinction, however, is
impossible to apply from the inadequate descriptions given. The mineral
and metal known to Agricola and his predecessors was almost always the
sulphide, and we have not felt justified in using the term antimony
alone, as that implies the refined product, therefore, we have adopted
either the Latin term or the old English term "grey antimony." The
smelted antimony of commerce sold under the latter term was the
sulphide. For further notes see p. 428.

BISMUTH*. _Plumbum cinereum_ (_Interpretatio_,--_bismut_). Agricola
states that this mineral occasionally occurs native, "but more often as
a mineral of another colour" (_De Nat. Fos._, p. 337), and he also
describes its commonest form as black or grey. This, considering his
localities, would indicate the sulphide, although he assigns no special
name to it. Although bismuth is mentioned before Agricola in the
_Nuetzliche Bergbuechlin_, he was the first to describe it (see p. 433).

QUICKSILVER. Apart from native quicksilver, Agricola adequately
describes cinnabar only. The term used by him for the mineral is _minium
nativum_ (_Interpretatio_,--_bergzinober_ or _cinnabaris_). He makes the
curious statement _(De Nat. Fos._ p. 335) that _rudis_ quicksilver also
occurs liver-coloured and blackish,--probably gangue colours. (See p.
432).

ARSENICAL MINERALS. Metallic arsenic was unknown, although it has been
maintained that a substance mentioned by Albertus Magnus (_De Rebus
Metallicis_) was the metallic form. Agricola, who was familiar with all
Albertus's writings, makes no mention of it, and it appears to us that
the statement of Albertus referred only to the oxide from sublimation.
Our word "arsenic" obviously takes root in the Greek for orpiment, which
was also used by Pliny (XXXIV, 56) as _arrhenicum_, and later was
modified to _arsenicum_ by the Alchemists, who applied it to the oxide.
Agricola gives the following in _Bermannus_ (p. 448), who has been
previously discussing realgar and orpiment:--"_Ancon_: Avicenna also has
a white variety. _Bermannus_: I cannot at all believe in a mineral of a
white colour; perhaps he was thinking of an artificial product; there
are two which the Alchemists make, one yellow and the other white, and
they are accounted the most powerful poisons to-day, and are called only
by the name _arsenicum_." In _De Natura Fossilium_ (p. 219) is described
the making of "the white variety" by sublimating orpiment, and also it
is noted that realgar can be made from orpiment by heating the latter
for five hours in a sealed crucible. In _De Re Metallica_ (Book X.), he
refers to _auripigmentum facticum_, and no doubt means the realgar made
from orpiment. The four minerals of arsenic base mentioned by Agricola
were:--

  _Auripigmentum_     _Operment_         Orpiment           Orpiment
                                          (As_{2}S_{3})

  _Sandaraca_         _Rosgeel_          Realgar (As S)     Realgar

  _Arsenicum_         _Arsenik_          Artificial         White arsenic
                                           arsenical oxide

  _Lapis subrutilus   _Mistpuckel_       Arsenopyrite       *Mispickel
     atque ...                             (Fe As S)
     splendens_

We are somewhat uncertain as to the identification of the last. The
yellow and red sulphides, however, were well known to the Ancients, and
are described by Aristotle, Theophrastus (71 and 89), Dioscorides (V,
81), Pliny (XXXIII, 22, etc.); and Strabo (XII, 3, 40) mentions a mine
of them near Pompeiopolis, where, because of its poisonous character
none but slaves were employed. The Ancients believed that the yellow
sulphide contained gold--hence the name _auripigmentum_, and Pliny
describes the attempt of the Emperor Caligula to extract the gold from
it, and states that he did obtain a small amount, but unprofitably. So
late a mineralogist as Hill (1750) held this view, which seemed to be
general. Both realgar and orpiment were important for pigments,
medicinal purposes, and poisons among the Ancients. In addition to the
above, some arsenic-cobalt minerals are included under _cadmia_.

IRON MINERALS.

  _Ferrum purum_      _Gedigen eisen_    Native iron        *Native iron

  _Terra ferria_      _Eisen ertz_     } Various soft and } Ironstone
                                       }   hard iron      }
  _Ferri vena_        _Eisen ertz_     }   ores, probably }
                                       }   mostly hematite}
  _Galenae genus      _Eisen glantz_   }                  }
    tertium omnis                      }                  }
    metalli                            }                  }
    inanissimi_                        }                  }
                                       }                  }
  _Schistos_          _Glaskoepfe oder  }                  }
                        bluetstein_     }                  }
                                       }                  }
  _Ferri vena         _Leber ertz_     }                  }
    jecoris colore_                    }                  }

  _Ferrugo_           _Ruest_             Part limonite      Iron rust

  _Magnes_            _Siegelstein       Magnetite          Lodestone
                        oder magnet_

  _Ochra nativa_      _Berg geel_        Limonite           Yellow ochre or
                                                              ironstone

  _Haematites_        _Bluet stein_    { Part hematite       Bloodstone or
                                      { Part jasper           ironstone

  _Schistos_          _Glas koepfe_       Part limonite      Ironstone

  _Pyrites_           _Kis_              Pyrites            Pyrites

  _Pyrites argenti    _wasser oder       Marcasite          *White iron
    coloris_            weisser kis_                          pyrites

  _Misy_              _Gel atrament_     Part copiapite     _Misy_ (see note
                                                              on p. 573)

  _Sory_              _Graw und          Partly a           _Sory_ (see note
                        schwartz           decomposed iron    on p. 573)
                        atrament_          pyrite

  _Melanteria_        _Schwartz und     Melanterite         _Melanteria_ (see
                        grau atrament_    (native vitriol)    note on p. 573)

The classification of iron ores on the basis of exterior
characteristics, chiefly hardness and brilliancy, does not justify a
more narrow rendering than "ironstone." Agricola (_De Nat. Fos._, Book
V.) gives elaborate descriptions of various iron ores, but the
descriptions under any special name would cover many actual minerals.
The subject of pyrites is a most confused one; the term originates from
the Greek word for fire, and referred in Greek and Roman times to almost
any stone that would strike sparks. By Agricola it was a generic term in
somewhat the same sense that it is still used in mineralogy, as, for
instance, iron pyrite, copper pyrite, etc. So much was this the case
later on, that Henckel, the leading mineralogist of the 18th Century,
entitled his large volume _Pyritologia_, and in it embraces practically
all the sulphide minerals then known. The term _marcasite_, of mediaeval
Arabic origin, seems to have had some vogue prior and subsequent to
Agricola. He, however, puts it on one side as merely a synonym for
pyrite, nor can it be satisfactorily defined in much better terms.
Agricola apparently did not recognise the iron base of pyrites, for he
says (_De Nat. Fos._, p. 366): "Sometimes, however, pyrites do not
contain any gold, silver, copper, or lead, and yet it is not a pure
stone, but a compound, and consists of stone and a substance which is
somewhat metallic, which is a species of its own." Many varieties were
known to him and described, partly by their other metal association, but
chiefly by their colour.

CADMIA. The minerals embraced under this term by the old mineralogists
form one of the most difficult chapters in the history of mineralogy.
These complexities reached their height with Agricola, for at this time
various new minerals classed under this heading had come under debate.
All these minerals were later found to be forms of zinc, cobalt, or
arsenic, and some of these minerals were in use long prior to Agricola.
From Greek and Roman times down to long after Agricola, brass was made
by cementing zinc ore with copper. Aristotle and Strabo mention an earth
used to colour copper, but give no details. It is difficult to say what
zinc mineral the _cadmium_ of Dioscorides (V, 46) and Pliny (XXXIV, 2),
really was. It was possibly only furnace calamine, or perhaps blende for
it was associated with copper. They amply describe _cadmia_ produced in
copper furnaces, and _pompholyx_ (zinc oxide). It was apparently not
until Theophilus (1150) that the term _calamina_ appears for that
mineral. Precisely when the term "zinc," and a knowledge of the metal,
first appeared in Europe is a matter of some doubt; it has been
attributed to Paracelsus, a contemporary of Agricola (see note on p.
409), but we do not believe that author's work in question was printed
until long after. The quotations from Agricola given below, in which
_zincum_ is mentioned in an obscure way, do not appear in the first
editions of these works, but only in the revised edition of 1559. In
other words, Agricola himself only learned of a substance under this
name a short period before his death in 1555. The metal was imported
into Europe from China prior to this time. He however does describe
actual metallic zinc under the term _conterfei_, and mentions its
occurrence in the cracks of furnace walls. (See also notes on p. 409).

The word cobalt (German _kobelt_) is from the Greek word _cobalos_,
"mime," and its German form was the term for gnomes and goblins. It
appears that the German miners, finding a material (Agricola's
"corrosive material") which injured their hands and feet, connected it
with the goblins, or used the term as an epithet, and finally it became
established for certain minerals (see note 21, p. 214, on this subject).
The first written appearance of the term in connection with minerals,
appears in Agricola's _Bermannus_ (1530). The first practical use of
cobalt was in the form of _zaffre_ or cobalt blue. There seems to be no
mention of the substance by the Greek or Roman writers, although
analyses of old colourings show some traces of cobalt, but whether
accidental or not is undetermined. The first mention we know of, was by
Biringuccio in 1540 (_De La Pirotechnia_, Book II, Chap. IX.), who did
not connect it with the minerals then called _cobalt_ or _cadmia_.
"_Zaffera_ is another mineral substance, like a metal of middle weight,
which will not melt alone, but accompanied by vitreous substances it
melts into an azure colour so that those who colour glass, or paint
vases or glazed earthenware, make use of it. Not only does it serve for
the above-mentioned operations, but if one uses too great a quantity of
it, it will be black and all other colours, according to the quantity
used." Agricola, although he does not use the word _zaffre_, does refer
to a substance of this kind, and in any event also missed the relation
between _zaffre_ and cobalt, as he seems to think (_De Nat. Fos._, p.
347) that _zaffre_ came from bismuth, a belief that existed until long
after his time. The cobalt of the Erzgebirge was of course, intimately
associated with this mineral. He says, "the slag of bismuth, mixed
together with metalliferous substances, which when melted make a kind of
glass, will tint glass and earthenware vessels blue." _Zaffre_ is the
roasted mineral ground with sand, while _smalt_, a term used more
frequently, is the fused mixture with sand.

The following are the substances mentioned by Agricola, which, we
believe, relate to cobalt and zinc minerals, some of them arsenical
compounds. Other arsenical minerals we give above.

  _Cadmia fossilis_   _Calmei_; _lapis   Calamine           Calamine
                        calaminaris_

  _Cadmia metallica_  _Kobelt_           Part cobalt        *_Cadmia
                                                              metallica_

  _Cadmia fornacis_   _Mitlere und       Furnace            Furnace accretions
                        obere              accretions or
                        offenbrueche_       furnace calamine

  _Bituminosa         _Kobelt des        (Mannsfeld copper  _Bituminosa cadmia_
    cadmia_             bergwacht_         schists)           (see note 4,
                                                              p. 273)

  _Galena inanis_     _Blende_           Sphalerite*        *Blende
                                           (Zn S)

  _Cobaltum               --             Smallite*        } _Cadmia metallica_
    cineraceum_                            (CoAs_{2})     }
                                                          }
  _Cobaltum nigrum_       --             Abolite*         }
                                                          }
  _Cobaltum ferri         --             Cobaltite        }
    colore_                                 (CoAsS)       }

  _Zincum_            _Zinck_            Zinc               Zinc

  _Liquor Candidus    _Conterfei_        Zinc               See note 48, p. 408
    ex fornace ...
    etc._

  _Atramentum             --             Goslarite          *Native white
    sutorium,                              (Zn SO_{4})        vitriol
    candidum, potissimum
    reperitur Goselariae_

  _Spodos             _Geeler zechen   } Either natural   { Grey _spodos_
    subterranea         rauch_         }   or artificial  {
    cinerea_                           }   zinc oxides,   {
                                       }   no doubt       {
  _Spodos             _Schwartzer      }   containing     { Black _spodos_
    subterranea         zechen rauch,  }   arsenical      {
    nigra_              auff dem       }   oxides         {
                        Altenberge     }                  {
                        nennet man in  }                  {
                        kis_           }                  {
                                       }                  {
  _Spodos             _Grauer zechen   }                  { Green _spodos_
    subterranea         rauch_         }                  {
    viridis_                           }                  {
                                       }                  {
  _Pompholyx_         _Huettenrauch_    }                  { _Pompholyx_ (see
                                       }                  {   note 26, p. 394)

As seen from the following quotations from Agricola, on _cadmia_ and
cobalt, there was infinite confusion as to the zinc, cobalt, and arsenic
minerals; nor do we think any good purpose is served by adding to the
already lengthy discussion of these passages, the obscurity of which is
natural to the state of knowledge; but we reproduce them as giving a
fairly clear idea of the amount of confusion then existing. It is,
however, desirable to bear in mind that the mines familiar to Agricola
abounded in complex mixtures of cobalt, nickel, arsenic, bismuth, zinc,
and antimony. Agricola frequently mentions the garlic odour from _cadmia
metallica_, which, together with the corrosive qualities mentioned
below, would obviously be due to arsenic. _Bermannus_ (p. 459). "This
kind of pyrites miners call _cobaltum_, if it be allowed to me to use
our German name. The Greeks call it _cadmia_. The juices, however, out
of which pyrites and silver are formed, appear to solidify into one
body, and thus is produced what they call _cobaltum_. There are some who
consider this the same as pyrites, because it is almost the same. There
are some who distinguish it as a species, which pleases me, for it has
the distinctive property of being extremely corrosive, so that it
consumes the hands and feet of the workmen, unless they are well
protected, which I do not believe that pyrites can do. Three kinds are
found, and distinguished more by the colour than by other properties;
they are black (abolite?), grey (smallite?), and iron colour (cobalt
glance?). Moreover, it contains more silver than does pyrites...."
_Bermannus_ (p. 431). "It (a sort of pyrites) is so like the colour of
galena that not without cause might anybody have doubt in deciding
whether it be pyrites or galena.... Perhaps this kind is neither pyrites
nor galena, but has a genus of its own. For it has not the colour of
pyrites, nor the hardness. It is almost the colour of galena, but of
entirely different components. From it there is made gold and silver,
and a great quantity is dug out from Reichenstein which is in Silesia,
as was lately reported to me. Much more is found at Raurici, which they
call _zincum_; which species differs from pyrites, for the latter
contains more silver than gold, the former only gold, or hardly any
silver."

(_De Natura Fossilium_, p. 170). "_Cadmia fossilis_ has an odour like
garlic" ... (p. 367). "We now proceed with _cadmia_, not the _cadmia
fornacis_ (furnace accretions) of which I spoke in the last book, nor
the _cadmia fossilis_ (calamine) devoid of metal, which is used to
colour copper, whose nature I explained in Book V, but the metallic
mineral (_fossilis metallica_), which Pliny states to be an ore from
which copper is made. The Ancients have left no record that another
metal could be smelted from it. Yet it is a fact that not only copper
but also silver may be smelted from it, and indeed occasionally both
copper and silver together. Sometimes, as is the case with pyrites, it
is entirely devoid of metal. It is frequently found in copper mines, but
more frequently still in silver mines. And there are likewise veins of
_cadmia_ itself.... There are several species of the _cadmia fossilis_
just as there were of _cadmia fornacum_. For one kind has the form of
grapes and another of broken tiles, a third seems to consist of layers.
But the _cadmia fossilis_ has much stronger properties than that which
is produced in the furnaces. Indeed, it often possesses such highly
corrosive power that it corrodes the hands and feet of the miners. It,
therefore, differs from pyrites in colour and properties. For pyrites,
if it does not contain vitriol, is generally either of a gold or silver
colour, rarely of any other. _Cadmia_ is either black or brown or grey,
or else reddish like copper when melted in the furnace.... For this
_cadmia_ is put in a suitable vessel, in the same way as quicksilver, so
that the heat of the fire will cause it to sublimate, and from it is
made a black or brown or grey body which the Alchemists call 'sublimated
_cadmia_' (_cadmiam sublimatam_). This possesses corrosive properties of
the highest degree. Cognate with _cadmia_ and pyrites is a compound
which the Noricians and Rhetians call _zincum_. This contains gold and
silver, and is either red or white. It is likewise found in the Sudetian
mountains, and is devoid of those metals.... With this _cadmia_ is
naturally related mineral _spodos_, known to the Moor Serapion, but
unknown to the Greeks; and also _pompholyx_--for both are produced by
fire where the miners, breaking the hard rocks in drifts, tunnels, and
shafts, burn the _cadmia_ or pyrites or galena or other similar
minerals. From _cadmia_ is made black, brown, and grey _spodos_; from
pyrites, white _pompholyx_ and _spodos_; from galena is made yellow or
grey _spodos_. But _pompholyx_ produced from copper stone (_lapide
aeroso_) after some time becomes green. The black _spodos_, similar to
soot, is found at Altenberg in Meissen. The white _pompholyx_, like wool
which floats in the air in summer, is found in Hildesheim in the seams
in the rocks of almost all quarries except in the sandstone. But the
grey and the brown and the yellow _pompholyx_ are found in those silver
mines where the miners break up the rocks by fire. All consist of very
fine particles which are very light, but the lightest of all is white
_pompholyx_."

QUARTZ MINERALS.

  _Quarzum_ ("which   _Quertz oder       Quartz             Quartz (see note
    Latins call         kiselstein_                           15, p. 380)
    _silex_")

  _Silex_             _Hornstein oder    Flinty or jaspery  Hornstone
                        feurstein_         quartz

  _Crystallum_        _Crystal_          Clear crystals     Crystal

  _Achates_           _Achat_            Agate              Agate

  _Sarda_             _Carneol_          Carnelian          Carnelian

  _Jaspis_            _Jaspis_           Part coloured      _Jaspis_
                                           quartz, part
                                           jade

  _Murrhina_          _Chalcedonius_     Chalcedony         Chalcedony

  _Coticula_          _Goldstein_        A black silicious  Touchstone (see
                                           stone              note 37, p. 252)

  _Amethystus_        _Amethyst_         Amethyst           Amethyst

LIME MINERALS.

  _Lapis            } _Gips_             Gypsum             Gypsum
    specularis_     }
                    }
  _Gypsum_          }

  _Marmor_            _Marmelstein_      Marble             Marble

  _Marmor             _Alabaster_        Alabaster          Alabaster
    alabastrites_

  _Marmor glarea_         --             Calcite (?)        Calc spar(?)

  _Saxum calcis_      _Kalchstein_       Limestone          Limestone

  _Marga_             _Mergel_           Marl               Marl

  _Tophus_            _Toffstein oder    Sintry             _Tophus_ (see note
                        topstein_          limestones,        13, p. 233)
                                           stalagmites,
                                           etc.

MISCELLANEOUS.

  _Amiantus_          _Federwis, pliant  Usually asbestos   Asbestos
                        salamanderhar_

  _Magnetis_          _Silberweis oder } Mica               *Mica
                        katzensilber_  }
                                       }
  _Bracteolae              --          }
    magnetidi simile_                  }
                                       }
  _Mica_              _Katzensilber    }
                        oder glimmer_  }

  _Silex ex eo ictu        --            Feldspar           *Feldspar
    ferri facile
    ignis
    elicitur....
    excubus figuris_

  _Medulla saxorum_   _Steinmarck_       Kaolinite          Porcelain clay

  _Fluores (lapides   _Flusse_           Fluorspar          *Fluorspar
    gemmarum simili)_                                        (see note 15,
                                                             p. 380)

  _Marmor in          _Spat_             Barite             *Heavy spar
    metallis
    repertum_

Apart from the above, many other minerals are mentioned in other
chapters, and some information is given with regard to them in the
footnotes.

[9] Three _librae_ of silver per _centumpondium_ would be equal to 875
ounces per short ton.

[10] As stated in note on p. 2, Agricola divided "stones so called" into
four kinds; the first, common stones in which he included lodestone and
jasper or bloodstone; the second embraced gems; the third were
decorative stones, such as marble, porphyry, etc.; the fourth were
rocks, such as sandstone and limestone.

LODESTONE. (_Magnes_; _Interpretatio_ gives _Siegelstein oder magnet_).
The lodestone was well-known to the Ancients under various
names--_magnes_, _magnetis_, _heraclion_, and _sideritis_. A review of
the ancient opinions as to its miraculous properties would require more
space than can be afforded. It is mentioned by many Greek writers,
including Hippocrates (460-372 B.C.) and Aristotle; while Theophrastus
(53), Dioscorides (V, 105), and Pliny (XXXIV, 42, XXXVI, 25) describe it
at length. The Ancients also maintained the existence of a stone,
_theamedes_, having repellant properties, and the two were supposed to
exist at times in the same stone.

EMERY. (_Smiris_; _Interpretatio_ gives _smirgel_). Agricola (_De Natura
Fossilium_, p. 265) says: "The ring-makers polish and clean their hard
gems with _smiris_. The glaziers use it to cut their glass into sheets.
It is found in the silver mines of Annaberg in Meissen and elsewhere."
Stones used for polishing gems are noted by the ancient authors, and
Dana (Syst. of Mineralogy, p. 211) considers the stone of Armenia, of
Theophrastus (77), to be emery, although it could quite well be any hard
stone, such as Novaculite--which is found in Armenia. Dioscorides (V,
166) describes a stone with which the engravers polish gems.

LAPIS JUDAICUS. (_Interpretatio_ gives _Jueden stein_). This was
undoubtedly a fossil, possibly a _pentremites_. Agricola (_De Natura
Fossilium_, p. 256) says: "It is shaped like an acorn, from the obtuse
end to the point proceed raised lines, all equidistant, etc." Many
fossils were included among the semi-precious stones by the Ancients.
Pliny (XXXVII, 55, 66, 73) describes many such stones, among them the
_balanites_, _phoenicitis_ and the _pyren_, which resemble the above.

TROCHITIS. (_Interpretatio_ gives _spangen oder rederstein_). This was
also a fossil, probably crinoid stems. Agricola (_De Natura Fossilium_,
p. 256) describes it: "_Trochites_ is so called from a wheel, and is
related to _lapis judaicus_. Nature has indeed given it the shape of a
drum (_tympanum_). The round part is smooth, but on both ends as it were
there is a module from which on all sides there extend radii to the
outer edge, which corresponds with the radii. These radii are so much
raised that it is fluted. The size of these _trochites_ varies greatly,
for the smallest is so little that the largest is ten times as big, and
the largest are a digit in length by a third of a digit in thickness ...
when immersed in vinegar they make bubbles."

[11] The "extraordinary earths" of Agricola were such substances as
ochres, tripoli, fullers earth, potters' clay, clay used for medicinal
purposes, etc., etc.

[12] Presumably the ore-body dips into a neighbouring property.

[13] The various kinds of iron tools are described in great detail in
Book VI.

[14] Fire-setting as an aid to breaking rock is of very ancient origin,
and moreover it persisted in certain German and Norwegian mines down to
the end of the 19th century--270 years after the first application of
explosives to mining. The first specific reference to fire-setting in
mining is by Agatharchides (2nd century B.C.) whose works are not
extant, but who is quoted by both Diodorus Siculus and Photius, for
which statement see note 8, p. 279. Pliny (XXXIII, 21) says:
"Occasionally a kind of silex is met with, which must be broken with
fire and vinegar, or as the tunnels are filled with suffocating fumes
and smoke, they frequently use bruising machines, carrying 150 _librae_
of iron." This combination of fire and vinegar he again refers to
(XXIII, 27), where he dilates in the same sentence on the usefulness of
vinegar for breaking rock and for salad dressing. This myth about
breaking rocks with fire and vinegar is of more than usual interest, and
its origin seems to be in the legend that Hannibal thus broke through
the Alps. Livy (59 B.C., 17 A.D.) seems to be the first to produce this
myth in writing; and, in any event, by Pliny's time (23-79 A.D.) it had
become an established method--in literature. Livy (XXI, 37) says, in
connection with Hannibal's crossing of the Alps: "They set fire to it
(the timber) when a wind had arisen suitable to excite the fire, then
when the rock was hot it was crumbled by pouring on vinegar (_infuso
aceto_). In this manner the cliff heated by the fire was broken by iron
tools, and the declivities eased by turnings, so that not only the
beasts of burden but also the elephants could be led down." Hannibal
crossed the Alps in 218 B.C. and Livy's account was written 200 years
later, by which time Hannibal's memory among the Romans was generally
surrounded by Herculean fables. Be this as it may, by Pliny's time the
vinegar was generally accepted, and has been ceaselessly debated ever
since. Nor has the myth ceased to grow, despite the remarks of Gibbon,
Lavalette, and others. A recent historian (Hennebert, _Histoire d'
Annibal_ II, p. 253) of that famous engineer and soldier, soberly sets
out to prove that inasmuch as literal acceptance of ordinary vinegar is
impossible, the Phoenicians must have possessed some mysterious high
explosive. A still more recent biographer swallows this argument _in
toto_. (Morris, "Hannibal," London, 1903, p. 103). A study of the
commentators of this passage, although it would fill a volume with
sterile words, would disclose one generalization: That the real scholars
have passed over the passage with the comment that it is either a
corruption or an old woman's tale, but that hosts of soldiers who set
about the biography of famous generals and campaigns, almost to a man
take the passage seriously, and seriously explain it by way of the rock
being limestone, or snow, or by the use of explosives, or other
foolishness. It has been proposed, although there are grammatical
objections, that the text is slightly corrupt and read _infosso acuto_,
instead of _infuso aceto_, in which case all becomes easy from a mining
point of view. If so, however, it must be assumed that the corruption
occurred during the 20 years between Livy and Pliny.

By the use of fire-setting in recent times at Koenigsberg (Arthur L.
Collins, "Fire-setting," Federated Inst. of Mining Engineers, Vol. V, p.
82) an advance of from 5 to 20 feet per month in headings was
accomplished, and on the score of economy survived the use of gunpowder,
but has now been abandoned in favour of dynamite. We may mention that
the use of gunpowder for blasting was first introduced at Schemnitz by
Caspar Weindle, in 1627, but apparently was not introduced into English
mines for nearly 75 years afterward, as the late 17th century English
writers continue to describe fire-setting.

[15] The strata here enumerated are given in the Glossary of _De Re
Metallica_ as follows:--

  _Corium terrae_            _Die erd oder leim._
  _Saxum rubrum_             _Rot gebirge._
  _Alterum item rubrum_      _Roterkle._
  _Argilla cinerea_          _Thone._
  _Tertium saxum_            _Gerhulle._
  _Cineris vena_             _Asche._
  _Quartum saxum_            _Gniest._
  _Quintum saxum_            _Schwehlen._
  _Sextum saxum_             _Oberrauchstein._
  _Septimum saxum_           _Zechstein._
  _Octavum saxum_            _Underrauchstein._
  _Nonum saxum_              _Blitterstein._
  _Decimum saxum_            _Oberschuelen._
  _Undecimum saxum_          _Mittelstein._
  _Duodecimum saxum_         _Underschuelen._
  _Decimumtertium saxum_     _Dach._
  _Decimumquartum saxum_     _Norweg._
  _Decimumquintum saxum_     _Lotwerg._
  _Decimumsextum saxum_      _Kamme._
  _Lapis aerosus fissilis_   _Schifer._

The description is no doubt that of the Mannsfeld cupriferous slates. It
is of some additional interest as the first attempt at stratigraphic
distinctions, although this must not be taken too literally, for we have
rendered the different numbered "_saxum_" in this connection as
"stratum." The German terms given by Agricola above, can many of them be
identified in the miners' terms to-day for the various strata at
Mannsfeld. Over the _kupferschiefer_ the names to-day are _kammschale_,
_dach_, _faule_, _zechstein_, _rauchwacke_, _rauchstein_, _asche_. The
relative thickness of these beds is much the same as given by Agricola.
The stringers in the 8th stratum of stone, which fuse in the fire of the
second order, were possibly calcite. The _rauchstein_ of the modern
section is distinguished by stringers of calcite, which give it at times
a brecciated appearance.

[16] The history of surveying and surveying instruments, and in a
subsidiary way their application to mine work, is a subject upon which
there exists a most extensive literature. However, that portion of such
history which relates to the period prior to Agricola represents a much
less proportion of the whole than do the citations to this chapter in
_De Re Metallica_, which is the first comprehensive discussion of the
mining application. The history of such instruments is too extensive to
be entered upon in a footnote, but there are some fundamental
considerations which, if they had been present in the minds of
historical students of this subject, would have considerably abridged
the literature on it. First, there can be no doubt that measuring cords
or rods and boundary stones existed almost from the first division of
land. There is, therefore, no need to try to discover their origins.
Second, the history of surveying and surveying instruments really begins
with the invention of instruments for taking levels, or for the
determination of angles with a view to geometrical calculation. The
meagre facts bearing upon this subject do not warrant the endless
expansion they have received by argument as to what was probable, in
order to accomplish assumed methods of construction among the Ancients.
For instance, the argument that in carrying the Grand Canal over
watersheds with necessary reservoir supply, the Chinese must have had
accurate levelling and surveying instruments before the Christian Era,
and must have conceived in advance a completed work, does not hold water
when any investigation will demonstrate that the canal grew by slow
accretion from the lateral river systems, until it joined almost by
accident. Much the same may be said about the preconception of
engineering results in several other ancient works. There can be no
certainty as to who first invented instruments of the order mentioned
above; for instance, the invention of the dioptra has been ascribed to
Hero, _vide_ his work on the _Dioptra_. He has been assumed to have
lived in the 1st or 2nd Century B.C. Recent investigations, however,
have shown that he lived about 100 A.D. (Sir Thomas Heath, Encyc. Brit.
11th Ed., XIII, 378). As this instrument is mentioned by Vitruvius (50
-0 B.C.) the myth that Hero was the inventor must also disappear.
Incidentally Vitruvius (VIII, 5) describes a levelling instrument called
a _chorobates_, which was a frame levelled either by a groove of water
or by plumb strings. Be the inventor of the _dioptra_ who he may, Hero's
work on that subject contains the first suggestion of mine surveys in
the problems (XIII, XIV, XV, XVI), where geometrical methods are
elucidated for determining the depths required for the connection of
shafts and tunnels. On the compass we give further notes on p. 56. It
was probably an evolution of the 13th Century. As to the application of
angle- and level-determining instruments to underground surveys, so far
as we know there is no reference prior to Agricola, except that of Hero.
Mr. Bennett Brough (Cantor Lecture, London, 1892) points out that the
_Nuetzliche Bergbuechlin_ (see Appendix) describes a mine compass, but
there is not the slightest reference to its use for anything but surface
direction of veins.

Although map-making of a primitive sort requires no instruments, except
legs, the oldest map in the world possesses unusual interest because it
happens to be a map of a mining region. This well-known Turin papyrus
dates from Seti I. (about 1300 B.C.), and it represents certain gold
mines between the Nile and the Red Sea. The best discussion is by Chabas
(_Inscriptions des Mines d'Or_, Chalons-sur-Saone, Paris, 1862, p.
30-36). Fragments of another papyrus, in the Turin Museum, are
considered by Lieblein (_Deux Papyras Hieratiques_, Christiania, 1868)
also to represent a mine of the time of Rameses I. If so, this one dates
from about 1400 B.C. As to an actual map of underground workings
(disregarding illustrations) we know of none until after Agricola's
time. At his time maps were not made, as will be gathered from the text.

[17] For greater clarity we have in a few places interpolated the terms
"major" and "minor" triangles.

[18] The names of the instruments here described in the original text,
their German equivalents in the Glossary, and the terms adopted in
translation are given below:--

  LATIN TEXT.            GLOSSARY.             TERMS ADOPTED.

  _Funiculus_                 --               Cord

  _Pertica_              _Stab_                Rod

  _Hemicyclium_          _Donlege bretlein_    Hemicycle

  _Tripus_               _Stul_                Tripod

  _Instrumentum cui      _Compass_             Compass
    index_

  _Orbis_                _Scheube_             Orbis

  _Libra stativa_        _Auffsafz_            Standing plummet
                                                 level

  _Libra pensilis_       _Wage_                Suspended plummet
                                                 level

  _Instrumentum cui      _Der schiner          Swiss compass
    index Alpinum_         compass_


[19] It is interesting to note that the ratio of any length so obtained,
to the whole length of the staff, is practically equal to the cosine of
the angle represented by the corresponding gradation on the hemicycle;
the gradations on the rod forming a fairly accurate table of cosines.

[20] It must be understood that instead of "plotting" a survey on a
reduced scale on paper, as modern surveyors do, the whole survey was
reproduced in full scale on the "surveyor's field."




BOOK VI.


Digging of veins I have written of, and the timbering of shafts,
tunnels, drifts, and other excavations, and the art of surveying. I will
now speak first of all, of the iron tools with which veins and rocks are
broken, then of the buckets into which the lumps of earth, rock, metal,
and other excavated materials are thrown, in order that they may be
drawn, conveyed, or carried out. Also, I will speak of the water vessels
and drains, then of the machines of different kinds,[1] and lastly of
the maladies of miners. And while all these matters are being described
accurately, many methods of work will be explained.

[Illustration 150 (Iron tools): A--First "iron tool." B--Second.
C--Third. D--Fourth.[2] E--Wedge. F--Iron block. G--Iron plate.
H--Wooden handle. I--Handle inserted in first tool.]

There are certain iron tools which the miners designate by names of
their own, and besides these, there are wedges, iron blocks, iron
plates, hammers, crowbars, pikes, picks, hoes, and shovels. Of those
which are especially referred to as "iron tools" there are four
varieties, which are different from one another in length or thickness,
but not in shape, for the upper end of all of them is broad and square,
so that it can be struck by the hammer. The lower end is pointed so as
to split the hard rocks and veins with its point. All of these have eyes
except the fourth. The first, which is in daily use among miners, is
three-quarters of a foot long, a digit and a half wide, and a digit
thick. The second is of the same width as the first, and the same
thickness, but one and one half feet long, and is used to shatter the
hardest veins in such a way that they crack open. The third is the same
length as the second, but is a little wider and thicker; with this one
they dig the bottoms of those shafts which slowly accumulate water. The
fourth is nearly three palms and one digit long, two digits thick, and
in the upper end it is three digits wide, in the middle it is one palm
wide, and at the lower end it is pointed like the others; with this they
cut out the harder veins. The eye in the first tool is one palm distant
from the upper end, in the second and third it is seven digits distant;
each swells out around the eye on both sides, and into it they fit a
wooden handle, which they hold with one hand, while they strike the iron
tool with a hammer, after placing it against the rock. These tools are
made larger or smaller as necessary. The smiths, as far as possible,
sharpen again all that become dull.

A wedge is usually three palms and two digits long and six digits wide;
at the upper end, for a distance of a palm, it is three digits thick,
and beyond that point it becomes thinner by degrees, until finally it is
quite sharp.

The iron block is six digits in length and width; at the upper end it
is two digits thick, and at the bottom a digit and a half. The iron
plate is the same length and width as the iron block, but it is very
thin. All of these, as I explained in the last book, are used when the
hardest kind of veins are hewn out. Wedges, blocks, and plates, are
likewise made larger or smaller.

[Illustration 151 (Hammers): A--Smallest of the smaller hammers.
B--Intermediate. C--Largest. D--Small kind of the larger hammer.
E--Large kind. F--Wooden handle. G--Handle fixed in the smallest
hammer.]

Hammers are of two kinds, the smaller ones the miners hold in one hand,
and the larger ones they hold with both hands. The former, because of
their size and use, are of three sorts. With the smallest, that is to
say, the lightest, they strike the second "iron tool;" with the
intermediate one the first "iron tool;" and with the largest the third
"iron tool"; this one is two digits wide and thick. Of the larger sort
of hammers there are two kinds; with the smaller they strike the fourth
"iron tool;" with the larger they drive the wedges into the cracks; the
former are three, and the latter five digits wide and thick, and a foot
long. All swell out in their middle, in which there is an eye for a
handle, but in most cases the handles are somewhat light, in order that
the workmen may be able to strike more powerful blows by the hammer's
full weight being thus concentrated.

[Illustration 152a (Crowbars): A--Round crowbar. B--Flat crowbar.
C--Pike.]

The iron crowbars are likewise of two kinds, and each kind is pointed
at one end. One is rounded, and with this they pierce to a shaft full of
water when a tunnel reaches to it; the other is flat, and with this they
knock out of the stopes on to the floor, the rocks which have been
softened by the fire, and which cannot be dislodged by the pike. A
miner's pike, like a sailor's, is a long rod having an iron head.

[Illustration 152b (Picks): A--Pick. B--Hoe. C--Shovel.]

The miner's pick differs from a peasant's pick in that the latter is
wide at the bottom and sharp, but the former is pointed. It is used to
dig out ore which is not hard, such as earth. Likewise a hoe and shovel
are in no way different from the common articles, with the one they
scrape up earth and sand, with the other they throw it into vessels.

Now earth, rock, mineral substances and other things dug out with the
pick or hewn out with the "iron tools" are hauled out of the shaft in
buckets, or baskets, or hide buckets; they are drawn out of tunnels in
wheelbarrows or open trucks, and from both they are sometimes carried in
trays.

[Illustration 154a (Buckets for hoisting ore)]

[Illustration 154b (Buckets for hoisting ore): A--Small bucket. B--Large
bucket. C--Staves. D--Iron hoops. E--Iron straps. F--Iron straps on the
bottom. G--Hafts. H--Iron bale. I--Hook of drawing-rope. K--Basket.
L--Hide bucket or sack.]

Buckets are of two kinds, which differ in size, but not in material or
shape. The smaller for the most part hold only about one _metreta_; the
larger are generally capable of carrying one-sixth of a _congius_;
neither is of unchangeable capacity, but they often vary.[3] Each is
made of staves circled with hoops, one of which binds the top and the
other the bottom. The hoops are sometimes made of hazel and oak, but
these are easily broken by dashing against the shaft, while those made
of iron are more durable. In the larger buckets the staves are thicker
and wider, as also are both hoops, and in order that the buckets may be
more firm and strong, they have eight iron straps, somewhat broad, four
of which run from the upper hoop downwards, and four from the lower hoop
upwards, as if to meet each other. The bottom of each bucket, both
inside and outside, is furnished with two or three straps of iron, which
run from one side of the lower hoop to the other, but the straps which
are on the outside are fixed crosswise. Each bucket has two iron hafts
which project above the edge, and it has an iron semi-circular bale
whose lower ends are fixed directly into the hafts, that the bucket may
be handled more easily. Each kind of bucket is much deeper than it is
wide, and each is wider at the top, in order that the material which is
dug out may be the more easily poured in and poured out again. Into the
smaller buckets strong boys, and into larger ones men, fill earth from
the bottom of the shaft with hoes; or the other material dug up is
shovelled into them or filled in with their hands, for which reason
these men are called "shovellers.[4]" Afterward they fix the hook of the
drawing-rope into the bale; then the buckets are drawn up by
machines--the smaller ones, because of their lighter weight, by machines
turned by men, and the larger ones, being heavier, by the machines
turned by horses. Some, in place of these buckets, substitute baskets
which hold just as much, or even more, since they are lighter than the
buckets; some use sacks made of ox-hide instead of buckets, and the
drawing-rope hook is fastened to their iron bale, usually three of these
filled with excavated material are drawn up at the same time as three
are being lowered and three are being filled by boys. The latter are
generally used at Schneeberg and the former at Freiberg.

[Illustration 155 (Wheelbarrows): A--Small wheelbarrow. B--Long planks
thereof. C--End-boards. D--Small wheel. E--Larger barrow. F--Front
end-board thereof.]

That which we call a _cisium_[5] is a vehicle with one wheel, not with
two, such as horses draw. When filled with excavated material it is
pushed by a workman out of tunnels or sheds. It is made as follows: two
planks are chosen about five feet long, one foot wide, and two digits
thick; of each of these the lower side is cut away at the front for a
length of one foot, and at the back for a length of two feet, while the
middle is left whole. Then in the front parts are bored circular holes,
in order that the ends of an axle may revolve in them. The intermediate
parts of the planks are perforated twice near the bottom, so as to
receive the heads of two little cleats on which the planks are fixed;
and they are also perforated in the middle, so as to receive the heads
of two end-boards, while keys fixed in these projecting heads strengthen
the whole structure. The handles are made out of the extreme ends of the
long planks, and they turn downward at the ends that they may be grasped
more firmly in the hands. The small wheel, of which there is only one,
neither has a nave nor does it revolve around the axle, but turns around
with it. From the felloe, which the Greeks called [Greek: apsides], two
transverse spokes fixed into it pass through the middle of the axle
toward the opposite felloe; the axle is square, with the exception of
the ends, each of which is rounded so as to turn in the opening. A
workman draws out this barrow full of earth and rock and draws it back
empty. Miners also have another wheelbarrow, larger than this one, which
they use when they wash earth mixed with tin-stone on to which a stream
has been turned. The front end-board of this one is deeper, in order
that the earth which has been thrown into it may not fall out.

[Illustration 156 (Trucks): A--Rectangular iron bands on truck. B--Its
iron straps. C--Iron axle. D--Wooden rollers. E--Small iron keys.
F--Large blunt iron pin. G--Same truck upside down.]

The open truck has a capacity half as large again as a wheelbarrow; it
is about four feet long and about two and a half feet wide and deep; and
since its shape is rectangular, it is bound together with three
rectangular iron bands, and besides these there are iron straps on all
sides. Two small iron axles are fixed to the bottom, around the ends of
which wooden rollers revolve on either side; in order that the rollers
shall not fall off the immovable axles, there are small iron keys. A
large blunt pin fixed to the bottom of the truck runs in a groove of a
plank in such a way that the truck does not leave the beaten track.
Holding the back part with his hands, the carrier pushes out the truck
laden with excavated material, and pushes it back again empty. Some
people call it a "dog"[6], because when it moves it makes a noise which
seems to them not unlike the bark of a dog. This truck is used when they
draw loads out of the longest tunnels, both because it is moved more
easily and because a heavier load can be placed in it.

[Illustration 157 (Batea): A--Small batea. B--Rope. C--Large batea.]

Bateas[7] are hollowed out of a single block of wood; the smaller kind
are generally two feet long and one foot wide. When they have been
filled with ore, especially when but little is dug from the shafts and
tunnels, men either carry them out on their shoulders, or bear them away
hung from their necks. Pliny[8] is our authority that among the
ancients everything which was mined was carried out on men's shoulders,
but in truth this method of carrying forth burdens is onerous, since it
causes great fatigue to a great number of men, and involves a large
expenditure for labour; for this reason it has been rejected and
abandoned in our day. The length of the larger batea is as much as three
feet, the width up to a foot and a palm. In these bateas the metallic
earth is washed for the purpose of testing it.

[Illustration 158a (Buckets for hoisting water): A--Smaller
water-bucket. B--Larger water-bucket. C--Dipper.]

Water-vessels differ both in the use to which they are put and in the
material of which they are made; some draw the water from the shafts and
pour it into other things, as dippers; while some of the vessels filled
with water are drawn out by machines, as buckets and bags; some are made
of wood, as the dippers and buckets, and others of hides, as the bags.
The water-buckets, just like the buckets which are filled with dry
material, are of two kinds, the smaller and the larger, but these are
unlike the other buckets at the top, as in this case they are narrower,
in order that the water may not be spilled by being bumped against the
timbers when they are being drawn out of the shafts, especially those
considerably inclined. The water is poured into these buckets by
dippers, which are small wooden buckets, but unlike the water-buckets,
they are neither narrow at the top nor bound with iron hoops, but with
hazel,--because there is no necessity for either. The smaller buckets
are drawn up by machines turned by men, the larger ones by those turned
by horses.

[Illustration 158b (Bags for hoisting water): A--Water-bag which takes
in water by itself. B--Water-bag into which water pours when it is
pushed with a shovel.]

Our people give the name of water-bags to those very large skins for
carrying water which are made of two, or two and a half, ox-hides. When
these water-bags have undergone much wear and use, first the hair comes
off them and they become bald and shining; after this they become torn.
If the tear is but a small one, a piece of smooth notched stick is put
into the broken part, and the broken bag is bound into its notches on
either side and sewn together; but if it is a large one, they mend it
with a piece of ox-hide. The water-bags are fixed to the hook of a
drawing-chain and let down and dipped into the water, and as soon as
they are filled they are drawn up by the largest machine. They are of
two kinds; the one kind take in the water by themselves; the water pours
into the other kind when it is pushed in a certain way by a wooden
shovel.

[Illustration 159 (Trough): A--Trough. B--Hopper.]

When the water has been drawn out from the shafts, it is run off in
troughs, or into a hopper, through which it runs into the trough.
Likewise the water which flows along the sides of the tunnels is carried
off in drains. These are composed of two hollowed beams joined firmly
together, so as to hold the water which flows through them, and they are
covered by planks all along their course, from the mouth of the tunnel
right up to the extreme end of it, to prevent earth or rock falling into
them and obstructing the flow of the water. If much mud gradually
settles in them the planks are raised and the drains are cleaned out,
for they would otherwise become stopped up and obstructed by this
accident. With regard to the trough lying above ground, which miners
place under the hoppers which are close by the shaft houses, these are
usually hollowed out of single trees. Hoppers are generally made of four
planks, so cut on the lower side and joined together that the top part
of the hopper is broader and the bottom part narrower.

I have sufficiently indicated the nature of the miners' iron tools and
their vessels. I will now explain their machines, which are of three
kinds, that is, hauling machines, ventilating machines, and ladders. By
means of the hauling machines loads are drawn out of the shafts; the
ventilating machines receive the air through their mouths and blow it
into shafts or tunnels, for if this is not done, diggers cannot carry on
their labour without great difficulty in breathing; by the steps of the
ladders the miners go down into the shafts and come up again.

[Illustration 161 (Windlass): A--Timber placed in front of the shaft.
B--Timber placed at the back of the shaft. C--Pointed stakes.
D--Cross-timbers. E--Posts or thick planks. F--Iron sockets. G--Barrel.
H--Ends of barrel. I--Pieces of wood. K--handle. L--Drawing-rope. M--Its
hook. N--Bucket. O--Bale of the bucket.]

Hauling machines are of varied and diverse forms, some of them being
made with great skill, and if I am not mistaken, they were unknown to
the Ancients. They have been invented in order that water may be drawn
from the depths of the earth to which no tunnels reach, and also the
excavated material from shafts which are likewise not connected with a
tunnel, or if so, only with very long ones. Since shafts are not all of
the same depth, there is a great variety among these hauling machines.
Of those by which dry loads are drawn out of the shafts, five sorts are
in the most common use, of which I will now describe the first. Two
timbers a little longer than the shaft are placed beside it, the one in
the front of the shaft, the other at the back. Their extreme ends have
holes through which stakes, pointed at the bottom like wedges, are
driven deeply into the ground, so that the timbers may remain
stationary. Into these timbers are mortised the ends of two
cross-timbers, one laid on the right end of the shaft, while the other
is far enough from the left end that between it and that end there
remains suitable space for placing the ladders. In the middle of the
cross-timbers, posts are fixed and secured with iron keys. In hollows at
the top of these posts thick iron sockets hold the ends of the barrel,
of which each end projects beyond the hollow of the post, and is
mortised into the end of another piece of wood a foot and a half long, a
palm wide and three digits thick; the other end of these pieces of wood
is seven digits wide, and into each of them is fixed a round handle,
likewise a foot and a half long. A winding-rope is wound around the
barrel and fastened to it at the middle part. The loop at each end of
the rope has an iron hook which is engaged in the bale of a bucket, and
so when the windlass revolves by being turned by the cranks, a loaded
bucket is always being drawn out of the shaft and an empty one is being
sent down into it. Two robust men turn the windlass, each having a
wheelbarrow near him, into which he unloads the bucket which is drawn up
nearest to him; two buckets generally fill a wheelbarrow; therefore when
four buckets have been drawn up, each man runs his own wheelbarrow out
of the shed and empties it. Thus it happens that if shafts are dug deep,
a hillock rises around the shed of the windlass. If a vein is not
metal-bearing, they pour out the earth and rock without discriminating;
whereas if it is metal-bearing, they preserve these materials, which
they unload separately and crush and wash. When they draw up buckets of
water they empty the water through the hopper into a trough, through
which it flows away.

[Illustration 162 (Windlass): A--Barrel. B--Straight levers. C--Usual
crank. D--Spokes of wheel. E--Rim of the same wheel.]

The next kind of machine, which miners employ when the shaft is deeper,
differs from the first in that it possesses a wheel as well as cranks.
This windlass, if the load is not being drawn up from a great depth, is
turned by one windlass man, the wheel taking the place of the other man.
But if the depth is greater, then the windlass is turned by three men,
the wheel being substituted for a fourth, because the barrel having been
once set in motion, the rapid revolutions of the wheel help, and it can
be turned more easily. Sometimes masses of lead are hung on to this
wheel, or are fastened to the spokes, in order that when it is turned
they depress the spokes by their weight and increase the motion; some
persons for the same reason fasten into the barrel two, three, or four
iron rods, and weight their ends with lumps of lead. The windlass wheel
differs from the wheel of a carriage and from the one which is turned
by water power, for it lacks the buckets of a water-wheel and it lacks
the nave of a carriage wheel. In the place of the nave it has a thick
barrel, in which are mortised the lower ends of the spokes, just as
their upper ends are mortised into the rim. When three windlass men turn
this machine, four straight levers are fixed to the one end of the
barrel, and to the other the crank which is usual in mines, and which is
composed of two limbs, of which the rounded horizontal one is grasped by
the hands; the rectangular limb, which is at right angles to the
horizontal one, has mortised in its lower end the round handle, and in
the upper end the end of the barrel. This crank is worked by one man,
the levers by two men, of whom one pulls while the other pushes; all
windlass workers, whatsoever kind of a machine they may turn, are
necessarily robust that they can sustain such great toil.

[Illustration 163 (Tread whim): A--Upright axle. B--Block. C--Roof beam.
D--Wheel. E--Toothed-drum. F--Horizontal axle. G--Drum composed of
rundles. H--Drawing rope. I--Pole. K--Upright posts. L--Cleats on the
wheel.]

The third kind of machine is less fatiguing for the workman, while it
raises larger loads; even though it is slower, like all other machines
which have drums, yet it reaches greater depths, even to a depth of 180
feet. It consists of an upright axle with iron journals at its
extremities, which turn in two iron sockets, the lower of which is fixed
in a block set in the ground and the upper one in the roof beam. This
axle has at its lower end a wheel made of thick planks joined firmly
together, and at its upper end a toothed drum; this toothed drum turns
another drum made of rundles, which is on a horizontal axle. A
winding-rope is wound around this latter axle, which turns in iron
bearings set in the beams. So that they may not fall, the two workmen
grasp with their hands a pole fixed to two upright posts, and then
pushing the cleats of the lower wheel backward with their feet, they
revolve the machine; as often as they have drawn up and emptied one
bucket full of excavated material, they turn the machine in the opposite
direction and draw out another.

[Illustration 165 (Horse whim): A--Upright beams. B--Sills laid flat
upon the ground. C--Posts. D--Area. E--Sill set at the bottom of the
hole. F--Axle. G--Double cross-beams. H--Drum. I--Winding-ropes.
K--Bucket. L--Small pieces of wood hanging from double cross-beams.
M--Short wooden block. N--Chain. O--Pole bar. P--Grappling hook. (Some
members mentioned in the text are not shown).]

The fourth machine raises burdens once and a half as large again as the
two machines first explained. When it is made, sixteen beams are erected
each forty feet long, one foot thick and one foot wide, joined at the
top with clamps and widely separated at the bottom. The lower ends of
all of them are mortised into separate sills laid flat upon the ground;
these sills are five feet long, a foot and a half wide, and a foot
thick. Each beam is also connected with its sill by a post, whose upper
end is mortised into the beam and its lower end mortised into the sill;
these posts are four feet long, one foot thick, and one foot wide. Thus
a circular area is made, the diameter of which is fifty feet; in the
middle of this area a hole is sunk to a depth of ten feet, and rammed
down tight, and in order to give it sufficient firmness, it is
strengthened with contiguous small timbers, through which pins are
driven, for by them the earth around the hole is held so that it cannot
fall in. In the bottom of the hole is planted a sill, three or four feet
long and a foot and a half thick and wide; in order that it may remain
fixed, it is set into the small timbers; in the middle of it is a steel
socket in which the pivot of the axle turns. In like manner a timber is
mortised into two of the large beams, at the top beneath the clamps;
this has an iron bearing in which the other iron journal of the axle
revolves. Every axle used in mining, to speak of them once for all, has
two iron journals, rounded off on all sides, one fixed with keys in the
centre of each end. That part of this journal which is fixed to the end
of the axle is as broad as the end itself and a digit thick; that which
projects beyond the axle is round and a palm thick, or thicker if
necessity requires; the ends of each miner's axle are encircled and
bound by an iron band to hold the journal more securely. The axle of
this machine, except at the ends, is square, and is forty feet long, a
foot and a half thick and wide. Mortised and clamped into the axle above
the lower end are the ends of four inclined beams; their outer ends
support two double cross-beams similarly mortised into them; the
inclined beams are eighteen feet long, three palms thick, and five wide.
The two cross-beams are fixed to the axle and held together by wooden
keys so that they will not separate, and they are twenty-four feet long.
Next, there is a drum which is made of three wheels, of which the middle
one is seven feet distant from the upper one and from the lower one; the
wheels have four spokes which are supported by the same number of
inclined braces, the lower ends of which are joined together round the
axle by a clamp; one end of each spoke is mortised into the axle and the
other into the rim. There are rundles all round the wheels, reaching
from the rim of the lowest one to the rim of the middle one, and
likewise from the rim of the middle wheel to the rim of the top one;
around these rundles are wound the drawing-ropes, one between the lowest
wheel and the middle one, the other between the middle and top wheels.
The whole of this construction is shaped like a cone, and is covered
with a shingle roof, with the exception of that square part which faces
the shaft. Then cross-beams, mortised at both ends, connect a double row
of upright posts; all of these are eighteen feet long, but the posts are
one foot thick and one foot wide, and the cross-beams are three palms
thick and wide. There are sixteen posts and eight cross-beams, and upon
these cross-beams are laid two timbers a foot wide and three palms
thick, hollowed out to a width of half a foot and to a depth of five
digits; the one is laid upon the upper cross-beams and the other upon
the lower; each is long enough to reach nearly from the drum of the whim
to the shaft. Near the same drum each timber has a small round wooden
roller six digits thick, whose ends are covered with iron bands and
revolve in iron rings. Each timber also has a wooden pulley, which
together with its iron axle revolves in holes in the timber. These
pulleys are hollowed out all round, in order that the drawing-rope may
not slip out of them, and thus each rope is drawn tight and turns over
its own roller and its own pulley. The iron hook of each rope is engaged
with the bale of the bucket. Further, with regard to the double
cross-beams which are mortised to the lower part of the main axle, to
each end of them there is mortised a small piece of wood four feet long.
These appear to hang from the double cross-beams, and a short wooden
block is fixed to the lower part of them, on which a driver sits. Each
of these blocks has an iron clavis which holds a chain, and that in turn
a pole-bar. In this way it is possible for two horses to draw this whim,
now this way and now that; turn by turn one bucket is drawn out of the
shaft full and another is let down into it empty; if, indeed, the shaft
is very deep four horses turn the whim. When a bucket has been drawn up,
whether filled with dry or wet materials, it must be emptied, and a
workman inserts a grappling hook and overturns it; this hook hangs on a
chain made of three or four links, fixed to a timber.

[Illustration 167 (Horse whim): A--Toothed drum which is on the upright
axle. B--Horizontal axle. C--Drum which is made of rundles. D--Wheel
near it. E--Drum made of hubs. F--Brake. G--Oscillating beam. H--Short
beam. I--Hook.]

The fifth machine is partly like the whim, and partly like the third rag
and chain pump, which draws water by balls when turned by horse power,
as I will explain a little later. Like this pump, it is turned by horse
power and has two axles, namely, an upright one--about whose lower end,
which descends into an underground chamber, there is a toothed drum--and
a horizontal one, around which there is a drum made of rundles. It has
indeed two drums around its horizontal axle, similar to those of the big
machine, but smaller, because it draws buckets from a shaft almost two
hundred and forty feet deep. One drum is made of hubs to which cleats
are fixed, and the other is made of rundles; and near the latter is a
wheel two feet deep, measured on all sides around the axle, and one foot
wide; and against this impinges a brake,[10] which holds the whim when
occasion demands that it be stopped. This is necessary when the hide
buckets are emptied after being drawn up full of rock fragments or
earth, or as often as water is poured out of buckets similarly drawn up;
for this machine not only raises dry loads, but also wet ones, just like
the other four machines which I have already described. By this also,
timbers fastened on to its winding-chain are let down into a shaft. The
brake is made of a piece of wood one foot thick and half a foot long,
projecting from a timber that is suspended by a chain from one end of a
beam which oscillates on an iron pin, this in turn being supported in
the claws of an upright post; and from the other end of this oscillating
beam a long timber is suspended by a chain, and from this long timber
again a short beam is suspended. A workman sits on the short beam when
the machine needs to be stopped, and lowers it; he then inserts a plank
or small stick so that the two timbers are held down and cannot be
raised. In this way the brake is raised, and seizing the drum, presses
it so tightly that sparks often fly from it; the suspended timber to
which the short beam is attached, has several holes in which the chain
is fixed, so that it may be raised as much as is convenient. Above
this wheel there are boards to prevent the water from dripping down and
wetting it, for if it becomes wet the brake will not grip the machine so
well. Near the other drum is a pin from which hangs a chain, in the last
link of which there is an iron hook three feet long; a ring is fixed to
the bottom of the bucket, and this hook, being inserted into it, holds
the bucket back so that the water may be poured out or the fragments of
rock emptied.

[Illustration 168 (Sleigh for Ore): A--Sledge with box placed on it.
B--Sledge with sacks placed on it. C--Stick. D--Dogs with pack-saddles.
E--Pigskin sacks tied to a rope.]

The miners either carry, draw, or roll down the mountains the ore which
is hauled out of the shafts by these five machines or taken out of the
tunnels. In the winter time our people place a box on a sledge and draw
it down the low mountains with a horse; and in this season they also
fill sacks made of hide and load them on dogs, or place two or three of
them on a small sledge which is higher in the fore part and lower at the
back. Sitting on these sacks, not without risk of his life, the bold
driver guides the sledge as it rushes down the mountain into the valleys
with a stick, which he carries in his hand; when it is rushing down too
quickly he arrests it with the stick, or with the same stick brings it
back to the track when it is turning aside from its proper course. Some
of the Noricians[11] collect ore during the winter into sacks made of
bristly pigskins, and drag them down from the highest mountains, which
neither horses, mules nor asses can climb. Strong dogs, that are trained
to bear pack saddles, carry these sacks when empty into the mountains.
When they are filled with ore, bound with thongs, and fastened to a
rope, a man, winding the rope round his arm or breast, drags them down
through the snow to a place where horses, mules, or asses bearing
pack-saddles can climb. There the ore is removed from the pigskin sacks
and put into other sacks made of double or triple twilled linen thread,
and these placed on the pack-saddles of the beasts are borne down to the
works where the ores are washed or smelted. If, indeed, the horses,
mules, or asses are able to climb the mountains, linen sacks filled with
ore are placed on their saddles, and they carry these down the narrow
mountain paths, which are passable neither by wagons nor sledges, into
the valleys lying below the steeper portions of the mountains. But on
the declivity of cliffs which beasts cannot climb, are placed long open
boxes made of planks, with transverse cleats to hold them together; into
these boxes is thrown the ore which has been brought in wheelbarrows,
and when it has run down to the level it is gathered into sacks, and the
beasts either carry it away on their backs or drag it away after it has
been thrown into sledges or wagons. When the drivers bring ore down
steep mountain slopes they use two-wheeled carts, and they drag behind
them on the ground the trunks of two trees, for these by their weight
hold back the heavily-laden carts, which contain ore in their boxes, and
check their descent, and but for these the driver would often be obliged
to bind chains to the wheels. When these men bring down ore from
mountains which do not have such declivities, they use wagons whose beds
are twice as long as those of the carts. The planks of these are so put
together that, when the ore is unloaded by the drivers, they can be
raised and taken apart, for they are only held together by bars. The
drivers employed by the owners of the ore bring down thirty or sixty
wagon-loads, and the master of the works marks on a stick the number of
loads for each driver. But some ore, especially tin, after being taken
from the mines, is divided into eight parts, or into nine, if the owners
of the mine give "ninth parts" to the owners of the tunnel. This is
occasionally done by measuring with a bucket, but more frequently planks
are put together on a spot where, with the addition of the level ground
as a base, it forms a hollow box. Each owner provides for removing,
washing, and smelting that portion which has fallen to him.
(Illustration p. 170).

[Illustration 170 (Wagons for Hauling Ore): A--Horses with pack-saddles.
B--Long box placed on the slope of the cliff. C--Cleats thereof.
D--Wheelbarrow. E--Two-wheeled cart. F--Trunks of trees. G--Wagon.
H--Ore being unloaded from the wagon. I--Bars. K--Master of the works
marking the number of carts on a stick. L--Boxes into which are thrown
the ore which has to be divided.]

Into the buckets, drawn by these five machines, the boys or men throw
the earth and broken rock with shovels, or they fill them with their
hands; hence they get their name of shovellers. As I have said, the same
machines raise not only dry loads, but also wet ones, or water; but
before I explain the varied and diverse kinds of machines by which
miners are wont to draw water alone, I will explain how heavy bodies,
such as axles, iron chains, pipes, and heavy timbers, should be lowered
into deep vertical shafts. A windlass is erected whose barrel has on
each end four straight levers; it is fixed into upright beams and around
it is wound a rope, one end of which is fastened to the barrel and the
other to those heavy bodies which are slowly lowered down by workmen;
and if these halt at any part of the shaft they are drawn up a little
way. When these bodies are very heavy, then behind this windlass another
is erected just like it, that their combined strength may be equal to
the load, and that it may be lowered slowly. Sometimes for the same
reason, a pulley is fastened with cords to the roof-beam, and the rope
descends and ascends over it.

[Illustration 171 (Windlass): A--Windlass. B--Straight levers.
C--Upright beams. D--Rope. E--Pulley. F--Timbers to be lowered.]

Water is either hoisted or pumped out of shafts. It is hoisted up after
being poured into buckets or water-bags; the water-bags are generally
brought up by a machine whose water-wheels have double paddles, while
the buckets are brought up by the five machines already described,
although in certain localities the fourth machine also hauls up
water-bags of moderate size. Water is drawn up also by chains of
dippers, or by suction pumps, or by "rag and chain" pumps.[12] When
there is but a small quantity, it is either brought up in buckets or
drawn up by chains of dippers or suction pumps, and when there is much
water it is either drawn up in hide bags or by rag and chain pumps.

[Illustration 173 (Chain Pumps): A--Iron frame. B--Lowest axle.
C--Fly-wheel. D--Smaller drum made of rundles. E--Second axle.
F--Smaller toothed wheel. G--Larger drum made of rundles. H--Upper axle.
I--Larger toothed wheel. K--Bearings. L--Pillow. M--Framework. N--Oak
timber. O--Support of iron bearing. P--Roller. Q--Upper drum. R--Clamps.
S--Chain. T--Links. V--Dippers. X--Crank. Y--Lower drum or balance
weight.]

First of all, I will describe the machines which draw water by chains of
dippers, of which there are three kinds. For the first, a frame is made
entirely of iron bars; it is two and a half feet high, likewise two and
a half feet long, and in addition one-sixth and one-quarter of a digit
long, one-fourth and one-twenty-fourth of a foot wide. In it there are
three little horizontal iron axles, which revolve in bearings or wide
pillows of steel, and also four iron wheels, of which two are made with
rundles and the same number are toothed. Outside the frame, around the
lowest axle, is a wooden fly-wheel, so that it can be more readily
turned, and inside the frame is a smaller drum which is made of eight
rundles, one-sixth and one twenty-fourth of a foot long. Around the
second axle, which does not project beyond the frame, and is therefore
only two and a half feet and one-twelfth and one-third part of a digit
long, there is on the one side, a smaller toothed wheel, which has
forty-eight teeth, and on the other side a larger drum, which is
surrounded by twelve rundles one-quarter of a foot long. Around the
third axle, which is one inch and one-third thick, is a larger toothed
wheel projecting one foot from the axle in all directions, which has
seventy-two teeth. The teeth of each wheel are fixed in with screws,
whose threads are screwed into threads in the wheel, so that those teeth
which are broken can be replaced by others; both the teeth and rundles
are steel. The upper axle projects beyond the frame, and is so skilfully
mortised into the body of another axle that it has the appearance of
being one; this axle proceeds through a frame made of beams which stands
around the shaft, into an iron fork set in a stout oak timber, and turns
on a roller made of pure steel. Around this axle is a drum of the kind
possessed by those machines which draw water by rag and chain; this drum
has triple curved iron clamps, to which the links of an iron chain hook
themselves, so that a great weight cannot tear them away. These links
are not whole like the links of other chains, but each one being curved
in the upper part on each side catches the one which comes next, whereby
it presents the appearance of a double chain. At the point where one
catches the other, dippers made of iron or brass plates and holding half
a _congius_[13] are bound to them with thongs; thus, if there are one
hundred links there will be the same number of dippers pouring out
water. When the shafts are inclined, the mouths of the dippers project
and are covered on the top that they may not spill out the water, but
when the shafts are vertical the dippers do not require a cover. By
fitting the end of the lowest small axle into the crank, the man who
works the crank turns the axle, and at the same time the drum whose
rundles turn the toothed wheel of the second axle; by this wheel is
driven the one that is made of rundles, which again turns the toothed
wheel of the upper small axle and thus the drum to which the clamps are
fixed. In this way the chain, together with the empty dippers, is slowly
let down, close to the footwall side of the vein, into the sump to the
bottom of the balance drum, which turns on a little iron axle, both ends
of which are set in a thick iron bearing. The chain is rolled round the
drum and the dippers fill with water; the chain being drawn up close to
the hangingwall side, carries the dippers filled with water above the
drum of the upper axle. Thus there are always three of the dippers
inverted and pouring water into a lip, from which it flows away into the
drain of the tunnel. This machine is less useful, because it cannot be
constructed without great expense, and it carries off but little water
and is somewhat slow, as also are other machines which possess a great
number of drums.

[Illustration 174 (Chain Pumps): A--Wheel which is turned by treading.
B--Axle. C--Double chain. D--Link of double chain. E--Dippers. F--Simple
clamps. G--Clamp with triple curves.]

The next machine of this kind, described in a few words by
Vitruvius,[14] more rapidly brings up dippers, holding a _congius_; for
this reason, it is more useful than the first one for drawing water out
of shafts, into which much water is continually flowing. This machine
has no iron frame nor drums, but has around its axle a wooden wheel
which is turned by treading; the axle, since it has no drum, does not
last very long. In other respects this pump resembles the first kind,
except that it differs from it by having a double chain. Clamps should
be fixed to the axle of this machine, just as to the drum of the other
one; some of these are made simple and others with triple curves, but
each kind has four barbs.

[Illustration 175 (Chain Pumps): A--Wheel whose paddles are turned by
the force of the stream. B--Axle. C--Drum of axle, to which clamps are
fixed. D--Chain. E--Link. F--Dippers. G--Balance drum.]

The third machine, which far excels the two just described, is made when
a running stream can be diverted to a mine; the impetus of the stream
striking the paddles revolves a water-wheel in place of the wheel turned
by treading. With regard to the axle, it is like the second machine, but
the drum which is round the axle, the chain, and the balance drum, are
like the first machine. It has much more capacious dippers than even the
second machine, but since the dippers are frequently broken, miners
rarely use these machines; for they prefer to lift out small quantities
of water by the first five machines or to draw it up by suction pumps,
or, if there is much water, to drain it by the rag and chain pump or to
bring it up in water-bags.

[Illustration 177 (Suction Pumps): A--Sump. B--Pipes. C--Flooring.
D--Trunk. E--Perforations of trunk. F--Valve. G--Spout. H--Piston-rod.
I--Hand-bar of piston. K--Shoe. L--Disc with round openings. M--Disc
with oval openings. N--Cover. O--This man is boring logs and making them
into pipes. P--Borer with auger. Q--Wider borer.]

Enough, then, of the first sort of pumps. I will now explain the other,
that is the pump which draws, by means of pistons, water which has been
raised by suction. Of these there are seven varieties, which though they
differ from one another in structure, nevertheless confer the same
benefits upon miners, though some to a greater degree than others. The
first pump is made as follows. Over the sump is placed a flooring,
through which a pipe--or two lengths of pipe, one of which is joined
into the other--are let down to the bottom of the sump; they are
fastened with pointed iron clamps driven in straight on both sides, so
that the pipes may remain fixed. The lower end of the lower pipe is
enclosed in a trunk two feet deep; this trunk, hollow like the pipe,
stands at the bottom of the sump, but the lower opening of it is blocked
with a round piece of wood; the trunk has perforations round about,
through which water flows into it. If there is one length of pipe, then
in the upper part of the trunk which has been hollowed out there is
enclosed a box of iron, copper, or brass, one palm deep, but without a
bottom, and a rounded valve so tightly closes it that the water, which
has been drawn up by suction, cannot run back; but if there are two
lengths of pipe, the box is enclosed in the lower pipe at the point of
junction. An opening or a spout in the upper pipe reaches to the drain
of the tunnel. Thus the workman, eager at his labour, standing on the
flooring boards, pushes the piston down into the pipe and draws it out
again. At the top of the piston-rod is a hand-bar and the bottom is
fixed in a shoe; this is the name given to the leather covering, which
is almost cone-shaped, for it is so stitched that it is tight at the
lower end, where it is fixed to the piston-rod which it surrounds, but
in the upper end where it draws the water it is wide open. Or else an
iron disc one digit thick is used, or one of wood six digits thick, each
of which is far superior to the shoe. The disc is fixed by an iron key
which penetrates through the bottom of the piston-rod, or it is screwed
on to the rod; it is round, with its upper part protected by a cover,
and has five or six openings, either round or oval, which taken together
present a star-like appearance; the disc has the same diameter as the
inside of the pipe, so that it can be just drawn up and down in it. When
the workman draws the piston up, the water which has passed in at the
openings of the disc, whose cover is then closed, is raised to the hole
or little spout, through which it flows away; then the valve of the box
opens, and the water which has passed into the trunk is drawn up by the
suction and rises into the pipe; but when the workman pushes down the
piston, the valve closes and allows the disc again to draw in the water.

[Illustration 178 (Suction Pumps): A--Erect timber. B--Axle. C--Sweep
which turns about the axle. D--Piston rod. E--Cross-bar. F--Ring with
which two pipes are generally joined.]

The piston of the second pump is more easily moved up and down. When
this pump is made, two beams are placed over the sump, one near the
right side of it, and the other near the left. To one beam a pipe is
fixed with iron clamps; to the other is fixed either the forked branch
of a tree or a timber cut out at the top in the shape of a fork, and
through the prongs of the fork a round hole is bored. Through a wide
round hole in the middle of a sweep passes an iron axle, so fastened
in the holes in the fork that it remains fixed, and the sweep turns on
this axle. In one end of the sweep the upper end of a piston-rod is
fastened with an iron key; at the other end a cross-bar is also fixed,
to the extreme ends of which are handles to enable it to be held more
firmly in the hands. And so when the workman pulls the cross-bar upward,
he forces the piston into the pipe; when he pushes it down again he
draws the piston out of the pipe; and thus the piston carries up the
water which has been drawn in at the openings of the disc, and the water
flows away through the spout into the drains. This pump, like the next
one, is identical with the first in all that relates to the piston,
disc, trunk, box, and valve.

[Illustration 179 (Suction Pumps): A--Posts. B--Axle. C--Wooden bars.
D--Piston rod. E--Short piece of wood. F--Drain. G--This man is
diverting the water which is flowing out of the drain, to prevent it
from flowing into the trenches which are being dug.]

The third pump is not unlike the one just described, but in place of one
upright, posts are erected with holes at the top, and in these holes the
ends of an axle revolve. To the middle of this axle are fixed two wooden
bars, to the end of one of which is fixed the piston, and to the end of
the other a heavy piece of wood, but short, so that it can pass between
the two posts and may move backward and forward. When the workman pushes
this piece of wood, the piston is drawn out of the pipe; when it returns
by its own weight, the piston is pushed in. In this way, the water
which the pipe contains is drawn through the openings in the disc and
emptied by the piston through the spout into the drain. There are some
who place a hand-bar underneath in place of the short piece of wood.
This pump, as also the last before described, is less generally used
among miners than the others.

[Illustration 180 (Duplex suction Pumps): A--Box. B--Lower part of box.
C--Upper part of same. D--Clamps. E--Pipes below the box. F--Column pipe
fixed above the box. G--Iron axle. H--Piston-rods. I--Washers to protect
the bearings. K--Leathers. L--Eyes in the axle. M--Rods whose ends are
weighted with lumps of lead. N--Crank. (_This plate is unlettered in the
first edition but corrected in those later._)]

The fourth kind is not a simple pump but a duplex one. It is made as
follows. A rectangular block of beechwood, five feet long, two and a
half feet wide, and one and a half feet thick, is cut in two and
hollowed out wide and deep enough so that an iron axle with cranks can
revolve in it. The axle is placed between the two halves of this box,
and the first part of the axle, which is in contact with the wood, is
round and the straight end forms a journal. Then the axle is bent down
the depth of a foot and again bent so as to continue straight, and at
this point a round piston-rod hangs from it; next it is bent up as far
as it was bent down; then it continues a little way straight again, and
then it is bent up a foot and again continues straight, at which point a
second round piston-rod is hung from it; afterward it is bent down the
same distance as it was bent up the last time; the other end of it,
which also acts as a journal, is straight. This part which protrudes
through the wood is protected by two iron washers in the shape of discs,
to which are fastened two leather washers of the same shape and size, in
order to prevent the water which is drawn into the box from gushing out.
These discs are around the axle; one of them is inside the box and the
other outside. Beyond this, the end of the axle is square and has two
eyes, in which are fixed two iron rods, and to their ends are weighted
lumps of lead, so that the axle may have a greater propensity to
revolve; this axle can easily be turned when its end has been mortised
in a crank. The upper part of the box is the shallower one, and the
lower part the deeper; the upper part is bored out once straight down
through the middle, the diameter of the opening being the same as the
outside diameter of the column pipe; the lower box has, side by side,
two apertures also bored straight down; these are for two pipes, the
space of whose openings therefore is twice as great as that of the upper
part; this lower part of the box is placed upon the two pipes, which are
fitted into it at their upper ends, and the lower ends of these pipes
penetrate into trunks which stand in the sump. These trunks have
perforations through which the water flows into them. The iron axle is
placed in the inside of the box, then the two iron piston-rods which
hang from it are let down through the two pipes to the depth of a foot.
Each piston has a screw at its lower end which holds a thick iron plate,
shaped like a disc and full of openings, covered with a leather, and
similarly to the other pump it has a round valve in a little box. Then
the upper part of the box is placed upon the lower one and properly
fitted to it on every side, and where they join they are bound by wide
thick iron plates, and held with small wide iron wedges, which are
driven in and are fastened with clamps. The first length of column pipe
is fixed into the upper part of the box, and another length of pipe
extends it, and a third again extends this one, and so on, another
extending on another, until the uppermost one reaches the drain of the
tunnel. When the crank worker turns the axle, the pistons in turn draw
the water through their discs; since this is done quickly, and since the
area of openings of the two pipes over which the box is set, is twice as
large as the opening of the column pipe which rises from the box, and
since the pistons do not lift the water far up, the impetus of the water
from the lower pipes forces it to rise and flow out of the column pipe
into the drain of the tunnel. Since a wooden box frequently cracks open,
it is better to make it of lead or copper or brass.

[Illustration 182 (Suction Pumps): A--Tappets of piston-rods. B--Cams of
the barrel. C--Square upper parts of piston-rods. D--Lower rounded parts
of piston-rods. E--Cross-beams. F--Pipes. G--Apertures of pipes.
H--Trough. (Fifth kind of pump--see p. 181).]

The fifth kind of pump is still less simple, for it is composed of two
or three pumps whose pistons are raised by a machine turned by men, for
each piston-rod has a tappet which is raised, each in succession, by two
cams on a barrel; two or four strong men turn it. When the pistons
descend into the pipes their discs draw the water; when they are raised
these force the water out through the pipes. The upper part of each of
these piston-rods, which is half a foot square, is held in a slot in a
cross-beam; the lower part, which drops down into the pipes, is made of
another piece of wood and is round. Each of these three pumps is
composed of two lengths of pipe fixed to the shaft timbers. This
machine draws the water higher, as much as twenty-four feet. If the
diameter of the pipes is large, only two pumps are made; if smaller,
three, so that by either method the volume of water is the same. This
also must be understood regarding the other machines and their pipes.
Since these pumps are composed of two lengths of pipe, the little iron
box having the iron valve which I described before, is not enclosed in a
trunk, but is in the lower length of pipe, at that point where it joins
the upper one; thus the rounded part of the piston-rod is only as long
as the upper length of pipe; but I will presently explain this more
clearly.

[Illustration 183 (Suction Pumps): A--Water-wheel. B--Axle. C--Trunk on
which the lowest pipe stands. D--Basket surrounding trunk. (Sixth kind
of pump--see p. 184.)]

The sixth kind of pump would be just the same as the fifth were it not
that it has an axle instead of a barrel, turned not by men but by a
water-wheel, which is revolved by the force of water striking its
buckets. Since water-power far exceeds human strength, this machine
draws water through its pipes by discs out of a shaft more than one
hundred feet deep. The bottom of the lowest pipe, set in the sump, not
only of this pump but also of the others, is generally enclosed in a
basket made of wicker-work, to prevent wood shavings and other things
being sucked in. (See p. 183.)

[Illustration 185 (Suction Pumps): A--shaft. B--Bottom pump. C--First
tank. D--Second pump. E--Second tank. F--Third pump. G--Trough. H--The
iron set in the axle. I--First pump rod. K--Second pump rod. L--Third
pump rod. M--First piston rod. N--Second piston rod. O--Third piston
rod. P--Little axles. Q--"Claws."]

The seventh kind of pump, invented ten years ago, which is the most
ingenious, durable, and useful of all, can be made without much expense.
It is composed of several pumps, which do not, like those last
described, go down into the shaft together, but of which one is below
the other, for if there are three, as is generally the case, the lower
one lifts the water of the sump and pours it out into the first tank;
the second pump lifts again from that tank into a second tank, and the
third pump lifts it into the drain of the tunnel. A wheel fifteen feet
high raises the piston-rods of all these pumps at the same time and
causes them to drop together. The wheel is made to revolve by paddles,
turned by the force of a stream which has been diverted to the mountain.
The spokes of the water-wheel are mortised in an axle six feet long and
one foot thick, each end of which is surrounded by an iron band, but in
one end there is fixed an iron journal; to the other end is attached an
iron like this journal in its posterior part, which is a digit thick and
as wide as the end of the axle itself. Then the iron extends
horizontally, being rounded and about three digits in diameter, for the
length of a foot, and serves as a journal; thence, it bends to a height
of a foot in a curve, like the horn of the moon, after which it again
extends straight out for one foot; thus it comes about that this last
straight portion, as it revolves in an orbit becomes alternately a foot
higher and a foot lower than the first straight part. From this round
iron crank there hangs the first flat pump-rod, for the crank is fixed
in a perforation in the upper end of this flat pump-rod just as the iron
key of the first set of "claws" is fixed into the lower end. In order to
prevent the pump-rod from slipping off it, as it could easily do, and
that it may be taken off when necessary, its opening is wider than the
corresponding part of the crank, and it is fastened on both sides by
iron keys. To prevent friction, the ends of the pump-rods are protected
by iron plates or intervening leathers. This first pump-rod is about
twelve feet long, the other two are twenty-six feet, and each is a palm
wide and three digits thick. The sides of each pump-rod are covered and
protected by iron plates, which are held on by iron screws, so that a
part which has received damage can be repaired. In the "claws" is set a
small round axle, a foot and a half long and two palms thick. The ends
are encircled by iron bands to prevent the iron journals which revolve
in the iron bearings of the wood from slipping out of it.[15] From this
little axle the wooden "claws" extend two feet, with a width and
thickness of six digits; they are three palms distant from each other,
and both the inner and outer sides are covered with iron plates. Two
rounded iron keys two digits thick are immovably fixed into the claws.
The one of these keys perforates the lower end of the first pump-rod,
and the upper end of the second pump-rod which is held fast. The other
key, which is likewise immovable, perforates the iron end of the first
piston-rod, which is bent in a curve and is immovable. Each such
piston-rod is thirteen feet long and three digits thick, and descends
into the first pipe of each pump to such depth that its disc nearly
reaches the valve-box. When it descends into the pipe, the water,
penetrating through the openings of the disc, raises the leather, and
when the piston-rod is raised the water presses down the leather, and
this supports its weight; then the valve closes the box as a door closes
an entrance. The pipes are joined by two iron bands, one palm wide, one
outside the other, but the inner one is sharp all round that it may fit
into each pipe and hold them together. Although at the present time
pipes lack the inner band, still they have nipples by which they are
joined together, for the lower end of the upper one holds the upper end
of the lower one, each being hewn away for a length of seven digits, the
former inside, the latter outside, so that the one can fit into the
other. When the piston-rod descends into the first pipe, that valve
which I have described is closed; when the piston-rod is raised, the
valve is opened so that the water can run in through the perforations.
Each one of such pumps is composed of two lengths of pipe, each of which
is twelve feet long, and the inside diameter is seven digits. The lower
one is placed in the sump of the shaft, or in a tank, and its lower end
is blocked by a round piece of wood, above which there are six
perforations around the pipe through which the water flows into it. The
upper part of the upper pipe has a notch one foot deep and a palm wide,
through which the water flows away into a tank or trough. Each tank is
two feet long and one foot wide and deep. There is the same number of
axles, "claws," and rods of each kind as there are pumps; if there are
three pumps, there are only two tanks, because the sump of the shaft and
the drain of the tunnel take the place of two. The following is the way
this machine draws water from a shaft. The wheel being turned raises the
first pump-rod, and the pump-rod raises the first "claw," and thus also
the second pump-rod, and the first piston-rod; then the second pump-rod
raises the second "claw," and thus the third pump-rod and the second
piston-rod; then the third pump-rod raises the third "claw" and the
third piston-rod, for there hangs no pump-rod from the iron key of
these claws, for it can be of no use in the last pump. In turn, when the
first pump-rod descends, each set of "claws" is lowered, each pump-rod
and each piston-rod. And by this system, at the same time the water is
lifted into the tanks and drained out of them; from the sump at the
bottom of the shaft it is drained out, and it is poured into the trough
of the tunnel. Further, around the main axle there may be placed two
water wheels, if the river supplies enough water to turn them, and from
the back part of each round iron crank, one or two pump-rods can be
hung, each of which can move the piston-rods of three pumps. Lastly, it
is necessary that the shafts from which the water is pumped out in pipes
should be vertical, for as in the case of the hauling machines, all
pumps which have pipes do not draw the water so high if the pipes are
inclined in inclined shafts, as if they are placed vertically in
vertical shafts.

[Illustration 187 (Suction Pumps): A--Water wheel of upper machine.
B--Its pump. C--Its trough. D--Wheel of lower machine. E--Its pump.
F--Race.]

If the river does not supply enough water-power to turn the
last-described pump, which happens because of the nature of the locality
or occurs during the summer season when there are daily droughts, a
machine is built with a wheel so low and light that the water of ever so
little a stream can turn it. This water, falling into a race, runs
therefrom on to a second high and heavy wheel of a lower machine, whose
pump lifts the water out of a deep shaft. Since, however, the water of
so small a stream cannot alone revolve the lower water-wheel, the axle
of the latter is turned at the start with a crank worked by two men, but
as soon as it has poured out into a pool the water which has been drawn
up by the pumps, the upper wheel draws up this water by its own pump,
and pours it into the race, from which it flows on to the lower
water-wheel and strikes its buckets. So both this water from the mine,
as well as the water of the stream, being turned down the races on to
that subterranean wheel of the lower machine, turns it, and water is
pumped out of the deeper part of the shaft by means of two or three
pumps.[16]

[Illustration 189 (Duplex suction Pumps): A--Upper axle. B--Wheel whose
buckets the force of the stream strikes. C--Toothed drum. D--Second
axle. E--Drum composed of rundles. F--Curved round irons. G--Rows of
pumps.]

If the stream supplies enough water straightway to turn a higher and
heavier water-wheel, then a toothed drum is fixed to the other end of
the axle, and this turns the drum made of rundles on another axle set
below it. To each end of this lower axle there is fitted a crank of
round iron curved like the horns of the moon, of the kind employed in
machines of this description. This machine, since it has rows of pumps
on each side, draws great quantities of water.

[Illustration 191 (Rag and Chain Pumps): A--Wheel. B--Axle. C--Journals.
D--Pillows. E--Drum. F--Clamps. G--Drawing-chain. H--Timbers. I--Balls.
K--Pipe. L--Race of stream.]

Of the rag and chain pumps there are six kinds known to us, of which the
first is made as follows: A cave is dug under the surface of earth or in
a tunnel, and timbered on all sides by stout posts and planks, to
prevent either the men from being crushed or the machine from being
broken by its collapse. In this cave, thus timbered, is placed a
water-wheel fitted to an angular axle. The iron journals of the axle
revolve in iron pillows, which are held in timbers of sufficient
strength. The wheel is generally twenty-four feet high, occasionally
thirty, and in no way different from those which are made for grinding
corn, except that it is a little narrower. The axle has on one side a
drum with a groove in the middle of its circumference, to which are
fixed many four-curved iron clamps. In these clamps catch the links of
the chain, which is drawn through the pipes out of the sump, and which
again falls, through a timbered opening, right down to the bottom into
the sump to a balancing drum. There is an iron band around the small
axle of the balancing drum, each journal of which revolves in an iron
bearing fixed to a timber. The chain turning about this drum brings up
the water by the balls through the pipes. Each length of pipe is
encircled and protected by five iron bands, a palm wide and a digit
thick, placed at equal distances from each other; the first band on the
pipe is shared in common with the preceding length of pipe into which it
is fitted, the last band with the succeeding length of pipe which is
fitted into it. Each length of pipe, except the first, is bevelled on
the outer circumference of the upper end to a distance of seven digits
and for a depth of three digits, in order that it may be inserted into
the length of pipe which goes before it; each, except the last, is
reamed out on the inside of the lower end to a like distance, but to the
depth of a palm, that it may be able to take the end of the pipe which
follows. And each length of pipe is fixed with iron clamps to the
timbers of the shaft, that it may remain stationary. Through this
continuous series of pipes, the water is drawn by the balls of the chain
up out of the sump as far as the tunnel, where it flows but into the
drains through an aperture in the highest pipe. The balls which lift the
water are connected by the iron links of the chain, and are six feet
distant from one another; they are made of the hair of a horse's tail
sewn into a covering to prevent it from being pulled out by the iron
clamps on the drum; the balls are of such size that one can be held in
each hand. If this machine is set up on the surface of the earth, the
stream which turns the water-wheel is led away through open-air ditches;
if in a tunnel, the water is led away through the subterranean drains.
The buckets of the water-wheel, when struck by the impact of the stream,
move forward and turn the wheel, together with the drum, whereby the
chain is wound up and the balls expel the water through the pipes. If
the wheel of this machine is twenty-four feet in diameter, it draws
water from a shaft two hundred and ten feet deep; if thirty feet in
diameter, it will draw water from a shaft two hundred and forty feet
deep. But such work requires a stream with greater water-power.

The next pump has two drums, two rows of pipes and two drawing-chains
whose balls lift out the water; otherwise they are like the last pump.
This pump is usually built when an excessive amount of water flows into
the sump. These two pumps are turned by water-power; indeed, water draws
water.

The following is the way of indicating the increase or decrease of the
water in an underground sump, whether it is pumped by this rag and chain
pump or by the first pump, or the third, or some other. From a beam
which is as high above the shaft as the sump is deep, is hung a cord, to
one end of which there is fastened a stone, the other end being attached
to a plank. The plank is lowered down by an iron wire fastened to the
other end; when the stone is at the mouth of the shaft the plank is
right down the shaft in the sump, in which water it floats. This plank
is so heavy that it can drag down the wire and its iron clasp and hook,
together with the cord, and thus pull the stone upwards. Thus, as the
water decreases, the plank descends and the stone is raised; on the
contrary, when the water increases the plank rises and the stone is
lowered. When the stone nearly touches the beam, since this indicates
that the water has been exhausted from the sump by the pump, the
overseer in charge of the machine closes the water-race and stops the
water-wheel; when the stone nearly touches the ground at the side of the
shaft, this indicates that the sump is full of water which has again
collected in it, because the water raises the plank and thus the stone
drags back both the rope and the iron wire; then the overseer opens the
water-race, whereupon the water of the stream again strikes the buckets
of the water-wheel and turns the pump. As workmen generally cease from
their labours on the yearly holidays, and sometimes on working days,
and are thus not always near the pump, and as the pump, if necessary,
must continue to draw water all the time, a bell rings aloud
continuously, indicating that this pump, or any other kind, is uninjured
and nothing is preventing its turning. The bell is hung by a cord from a
small wooden axle held in the timbers which stand over the shaft, and a
second long cord whose upper end is fastened to the small axle is
lowered into the shaft; to the lower end of this cord is fastened a
piece of wood; and as often as a cam on the main axle strikes it, so
often does the bell ring and give forth a sound.

[Illustration 193 (Rag and Chain Pumps): A--Upright axle. B--Toothed
wheel. C--Teeth. D--Horizontal axle. E--Drum which is made of rundles.
F--Second drum. G--Drawing-chain. H--The balls.]

The third pump of this kind is employed by miners when no river capable
of turning a water-wheel can be diverted, and it is made as follows.
They first dig a chamber and erect strong timbers and planks to prevent
the sides from falling in, which would overwhelm the pump and kill the
men. The roof of the chamber is protected with contiguous timbers, so
arranged that the horses which pull the machine can travel over it. Next
they again set up sixteen beams forty feet long and one foot wide and
thick, joined by clamps at the top and spreading apart at the bottom,
and they fit the lower end of each beam into a separate sill laid flat
on the ground, and join these by a post; thus there is created a
circular area of which the diameter is fifty feet. Through an opening in
the centre of this area there descends an upright square axle,
forty-five feet long and a foot and a half wide and thick; its lower
pivot revolves in a socket in a block laid flat on the ground in the
chamber, and the upper pivot revolves in a bearing in a beam which is
mortised into two beams at the summit beneath the clamps; the lower
pivot is seventeen feet distant from either side of the chamber, _i.e._,
from its front and rear. At the height of a foot above its lower end,
the axle has a toothed wheel, the diameter of which is twenty-two feet.
This wheel is composed of four spokes and eight rim pieces; the spokes
are fifteen feet long and three-quarters of a foot wide and thick[17];
one end of them is mortised in the axle, the other in the two rims where
they are joined together. These rims are three-quarters of a foot thick
and one foot wide, and from them there rise and project upright teeth
three-quarters of a foot high, half a foot wide, and six digits thick.
These teeth turn a second horizontal axle by means of a drum composed of
twelve rundles, each three feet long and six digits wide and thick. This
drum, being turned, causes the axle to revolve, and around this axle
there is a drum having iron clamps with fourfold curves in which catch
the links of a chain, which draws water through pipes by means of balls.
The iron journals of this horizontal axle revolve on pillows which are
set in the centre of timbers. Above the roof of the chamber there are
mortised into the upright axle the ends of two beams which rise
obliquely; the upper ends of these beams support double cross-beams,
likewise mortised to the axle. In the outer end of each cross-beam there
is mortised a small wooden piece which appears to hang down; in this
wooden piece there is similarly mortised at the lower end a short
board; this has an iron key which engages a chain, and this chain again
a pole-bar. This machine, which draws water from a shaft two hundred and
forty feet deep, is worked by thirty-two horses; eight of them work for
four hours, and then these rest for twelve hours, and the same number
take their place. This kind of machine is employed at the foot of the
Harz[18] mountains and in the neighbourhood. Further, if necessity
arises, several pumps of this kind are often built for the purpose of
mining one vein, but arranged differently in different localities
varying according to the depth. At Schemnitz, in the Carpathian
mountains, there are three pumps, of which the lowest lifts water from
the lowest sump to the first drains, through which it flows into the
second sump; the intermediate one lifts from the second sump to the
second drain, from which it flows into the third sump; and the upper one
lifts it to the drains of the tunnel, through which it flows away. This
system of three machines of this kind is turned by ninety-six horses;
these horses go down to the machines by an inclined shaft, which slopes
and twists like a screw and gradually descends. The lowest of these
machines is set in a deep place, which is distant from the surface of
the ground 660 feet.

[Illustration 194 (Rag and Chain Pumps): A--Axle. B--Drum.
C--Drawing-chain. D--Balls. E--Clamps.]

The fourth species of pump belongs to the same genera, and is made as
follows. Two timbers are erected, and in openings in them, the ends of a
barrel revolve. Two or four strong men turn the barrel, that is to say,
one or two pull the cranks, and one or two push them, and in this way
help the others; alternately another two or four men take their place.
The barrel of this machine, just like the horizontal axle of the other
machines, has a drum whose iron clamps catch the links of a
drawing-chain. Thus water is drawn through the pipes by the balls from a
depth of forty-eight feet. Human strength cannot draw water higher than
this, because such very heavy labour exhausts not only men, but even
horses; only water-power can drive continuously a drum of this kind.
Several pumps of this kind, as of the last, are often built for the
purpose of mining on a single vein, but they are arranged differently
for different positions and depths.

[Illustration 195 (Rag and Chain Pumps): A--Axles. B--Levers. C--Toothed
drum. D--Drum made of rundles. E--Drum in which iron clamps are fixed.]

The fifth pump of this kind is partly like the third and partly like
the fourth, because it is turned by strong men like the last, and like
the third it has two axles and three drums, though each axle is
horizontal. The journals of each axle are so fitted in the pillows of
the beams that they cannot fly out; the lower axle has a crank at one
end and a toothed drum at the other end; the upper axle has at one end a
drum made of rundles, and at the other end, a drum to which are fixed
iron clamps, in which the links of a chain catch in the same way as
before, and from the same depth, draw water through pipes by means of
balls. This revolving machine is turned by two pairs of men alternately,
for one pair stands working while the other sits taking a rest; while
they are engaged upon the task of turning, one pulls the crank and the
other pushes, and the drums help to make the pump turn more easily.

[Illustration 197 (Rag and Chain Pumps): A--Axles. B--Wheel which is
turned by treading. C--Toothed wheel. D--Drum made of rundles. E--Drum
to which are fixed iron clamps. F--Second wheel. G--Balls.]

The sixth pump of this kind likewise has two axles. At one end of the
lower axle is a wheel which is turned by two men treading, this is
twenty-three feet high and four feet wide, so that one man may stand
alongside the other. At the other end of this axle is a toothed wheel.
The upper[19] axle has two drums and one wheel; the first drum is made
of rundles, and to the other there are fixed the iron clamps. The wheel
is like the one on the second machine which is chiefly used for drawing
earth and broken rock out of shafts. The treaders, to prevent themselves
from falling, grasp in their hands poles which are fixed to the inner
sides of the wheel. When they turn this wheel, the toothed drum being
made to revolve, sets in motion the other drum which is made of rundles,
by which means again the links of the chain catch to the cleats of the
third drum and draw water through pipes by means of balls,--from a depth
of sixty-six feet.

[Illustration 199 (Baling Water): A--Reservoir. B--Race. C, D--Levers.
E, F--Troughs under the water gates. G, H--Double rows of buckets.
I--Axle. K--Larger drum. L--Drawing-chain. M--Bag. N--Hanging cage.
O--Man who directs the machine. P, Q--Men emptying bags.]

But the largest machine of all those which draw water is the one which
follows. First of all a reservoir is made in a timbered chamber; this
reservoir is eighteen feet long and twelve feet wide and high. Into this
reservoir a stream is diverted through a water-race or through the
tunnel; it has two entrances and the same number of gates. Levers are
fixed to the upper part of these gates, by which they can be raised and
let down again, so that by one way the gates are opened and in the other
way closed. Beneath the openings are two plank troughs which carry the
water flowing from the reservoir, and pour it on to the buckets of the
water-wheel, the impact of which turns the wheel. The shorter trough
carries the water, which strikes the buckets that turn the wheel toward
the reservoir, and the longer trough carries the water which strikes
those buckets that turn the wheel in the opposite direction. The casing
or covering of the wheel is made of joined boards to which strips are
affixed on the inner side. The wheel itself is thirty-six feet in
diameter, and is mortised to an axle, and it has, as I have already
said, two rows of buckets, of which one is set the opposite way to the
other, so that the wheel may be turned toward the reservoir or in the
opposite direction. The axle is square and is thirty-five feet long
and two feet thick and wide. Beyond the wheel, at a distance of six
feet, the axle has four hubs, one foot wide and thick, each one of which
is four feet distant from the next; to these hubs are fixed by iron
nails as many pieces of wood as are necessary to cover the hubs, and, in
order that the wood pieces may fit tight, they are broader on the
outside and narrower on the inside; in this way a drum is made, around
which is wound a chain to whose ends are hooked leather bags. The reason
why a drum of this kind is made, is that the axle may be kept in good
condition, because this drum when it becomes worn away by use can be
repaired easily. Further along the axle, not far from the end, is
another drum one foot broad, projecting two feet on all sides around the
axle. And to this, when occasion demands, a brake is applied forcibly
and holds back the machine; this kind of brake I have explained before.
Near the axle, in place of a hopper, there is a floor with a
considerable slope, having in front of the shaft a width of fifteen feet
and the same at the back; at each side of it there is a stout post
carrying an iron chain which has a large hook. Five men operate this
machine; one lets down the doors which close the reservoir gates, or by
drawing down the levers, opens the water-races; this man, who is the
director of this machine, stands in a hanging cage beside the reservoir.
When one bag has been drawn out nearly as far as the sloping floor, he
closes the water gate in order that the wheel may be stopped; when the
bag has been emptied he opens the other water gate, in order that the
other set of buckets may receive the water and drive the wheel in the
opposite direction. If he cannot close the water-gate quickly enough,
and the water continues to flow, he calls out to his comrade and bids
him raise the brake upon the drum and stop the wheel. Two men
alternately empty the bags, one standing on that part of the floor which
is in front of the shaft, and the other on that part which is at the
back. When the bag has been nearly drawn up--of which fact a certain
link of the chain gives warning--the man who stands on the one part of
the floor, catches a large iron hook in one link of the chain, and pulls
out all the subsequent part of the chain toward the floor, where the bag
is emptied by the other man. The object of this hook is to prevent the
chain, by its own weight, from pulling down the other empty bag, and
thus pulling the whole chain from its axle and dropping it down the
shaft. His comrade in the work, seeing that the bag filled with water
has been nearly drawn out, calls to the director of the machine and bids
him close the water of the tower so that there will be time to empty the
bag; this being emptied, the director of the machine first of all
slightly opens the other water-gate of the tower to allow the end of the
chain, together with the empty bag, to be started into the shaft again,
and then opens entirely the water-gates. When that part of the chain
which has been pulled on to the floor has been wound up again, and has
been let down over the shaft from the drum, he takes out the large hook
which was fastened into a link of the chain. The fifth man stands in a
sort of cross-cut beside the sump, that he may not be hurt, if it should
happen that a link is broken and part of the chain or anything else
should fall down; he guides the bag with a wooden shovel, and fills it
with water if it fails to take in the water spontaneously. In these
days, they sew an iron band into the top of each bag that it may
constantly remain open, and when lowered into the sump may fill itself
with water, and there is no need for a man to act as governor of the
bags. Further, in these days, of those men who stand on the floor the
one empties the bags, and the other closes the gates of the reservoir
and opens them again, and the same man usually fixes the large hook in
the link of the chain. In this way, three men only are employed in
working this machine; or even--since sometimes the one who empties the
bag presses the brake which is raised against the other drum and thus
stops the wheel--two men take upon themselves the whole labour.

But enough of haulage machines; I will now speak of ventilating
machines. If a shaft is very deep and no tunnel reaches to it, or no
drift from another shaft connects with it, or when a tunnel is of great
length and no shaft reaches to it, then the air does not replenish
itself. In such a case it weighs heavily on the miners, causing them to
breathe with difficulty, and sometimes they are even suffocated, and
burning lamps are also extinguished. There is, therefore, a necessity
for machines which the Greeks call [Greek: pneumatikai] and the Latins
_spiritales_--though they do not give forth any sound--which enable the
miners to breathe easily and carry on their work.

[Illustration 201 (Windsails for Ventilation): A--Sills. B--Pointed
stakes. C--Cross-beams. D--Upright planks. E--Hollows. F--Winds.
G--Covering disc. H--Shafts. I--Machine without a covering.]

These devices are of three genera. The first receives and diverts into
the shaft the blowing of the wind, and this genus is divided into three
species, of which the first is as follows. Over the shaft--to which no
tunnel connects--are placed three sills a little longer than the shaft,
the first over the front, the second over the middle, and the third over
the back of the shaft. Their ends have openings, through which pegs,
sharpened at the bottom, are driven deeply into the ground so as to hold
them immovable, in the same way that the sills of the windlass are
fixed. Each of these sills is mortised into each of three cross-beams,
of which one is at the right side of the shaft, the second at the left,
and the third in the middle. To the second sill and the second
cross-beam--each of which is placed over the middle of the shaft--planks
are fixed which are joined in such a manner that the one which precedes
always fits into the groove of the one which follows. In this way four
angles and the same number of intervening hollows are created, which
collect the winds that blow from all directions. The planks are roofed
above with a cover made in a circular shape, and are open below, in
order that the wind may not be diverted upward and escape, but may be
carried downward; and thereby the winds of necessity blow into the
shafts through these four openings. However, there is no need to roof
this kind of machine in those localities in which it can be so placed
that the wind can blow down through its topmost part.

[Illustration 202 (Windsails for Ventilation): A--Projecting mouth of
conduit. B--Planks fixed to the mouth of the conduit which does not
project.]

The second machine of this genus turns the blowing wind into a shaft
through a long box-shaped conduit, which is made of as many lengths of
planks, joined together, as the depth of the shaft requires; the joints
are smeared with fat, glutinous clay moistened with water. The mouth of
this conduit either projects out of the shaft to a height of three or
four feet, or it does not project; if it projects, it is shaped like a
rectangular funnel, broader and wider at the top than the conduit
itself, that it may the more easily gather the wind; if it does not
project, it is not broader than the conduit, but planks are fixed to it
away from the direction in which the wind is blowing, which catch the
wind and force it into the conduit.

[Illustration 203 (Windsails for Ventilation): A--Wooden barrels.
B--Hoops. C--Blow-holes. D--Pipe. E--Table. F--Axle. G--Opening in the
bottom of the barrel. H--Wing.]

The third of this genus of machine is made of a pipe or pipes and a
barrel. Above the uppermost pipe there is erected a wooden barrel, four
feet high and three feet in diameter, bound with wooden hoops; it has a
square blow-hole always open, which catches the breezes and guides them
down either by a pipe into a conduit or by many pipes into the shaft. To
the top of the upper pipe is attached a circular table as thick as the
bottom of the barrel, but of a little less diameter, so that the barrel
may be turned around on it; the pipe projects out of the table and is
fixed in a round opening in the centre of the bottom of the barrel. To
the end of the pipe a perpendicular axle is fixed which runs through the
centre of the barrel into a hole in the cover, in which it is fastened,
in the same way as at the bottom. Around this fixed axle and the table
on the pipe, the movable barrel is easily turned by a zephyr, or much
more by a wind, which govern the wing on it. This wing is made of thin
boards and fixed to the upper part of the barrel on the side furthest
away from the blow-hole; this, as I have said, is square and always
open. The wind, from whatever quarter of the world it blows, drives the
wing straight toward the opposite direction, in which way the barrel
turns the blow-hole towards the wind itself; the blow-hole receives the
wind, and it is guided down into the shaft by means of the conduit or
pipes.

[Illustration 204 (Ventilation Fans): A--Drum. B--Box-shaped casing.
C--Blow-hole. D--Second hole. E--Conduit. F--Axle. G--Lever of axle.
H--Rods.]

The second genus of blowing machine is made with fans, and is likewise
varied and of many forms, for the fans are either fitted to a windlass
barrel or to an axle. If to an axle, they are either contained in a
hollow drum, which is made of two wheels and a number of boards joining
them together, or else in a box-shaped casing. The drum is stationary
and closed on the sides, except for round holes of such size that the
axle may turn in them; it has two square blow-holes, of which the upper
one receives the air, while the lower one empties into the conduit
through which the air is led down the shaft. The ends of the axle, which
project on each side of the drum, are supported by forked posts or
hollowed beams plated with thick iron; one end of the axle has a crank,
while in the other end are fixed four rods with thick heavy ends, so
that they weight the axle, and when turned, make it prone to motion as
it revolves. And so, when the workman turns the axle by the crank, the
fans, the description of which I will give a little later, draw in the
air by the blow-hole, and force it through the other blow-hole which
leads to the conduit, and through this conduit the air penetrates into
the shaft.

[Illustration 205 (Ventilation Fans): A--Box-shaped casing placed on the
ground. B--Its blow-hole. C--Its axle with fans. D--Crank of the axle.
E--Rods of same. F--Casing set on timbers. G--Sails which the axle has
outside the casing.]

The one with the box-shaped casing is furnished with just the same
things as the drum, but the drum is far superior to the box; for the
fans so fill the drum that they almost touch it on every side, and drive
into the conduit all the air that has been accumulated; but they cannot
thus fill the box-shaped casing, on account of its angles, into which
the air partly retreats; therefore it cannot be as useful as the drum.
The kind with a box-shaped casing is not only placed on the ground, but
is also set up on timbers like a windmill, and its axle, in place of a
crank, has four sails outside, like the sails of a windmill. When these
are struck by the wind they turn the axle, and in this way its
fans--which are placed within the casing--drive the air through the
blow-hole and the conduit into the shaft. Although this machine has no
need of men whom it is necessary to pay to work the crank, still when
the sky is devoid of wind, as it often is, the machine does not turn,
and it is therefore less suitable than the others for ventilating a
shaft.

[Illustration 206 (Ventilation Fans): A--Hollow drum. B--Its blow-hole.
C--Axle with fans. D--Drum which is made of rundles. E--Lower axle.
F--Its toothed wheel. G--Water wheel.]

In the kind where the fans are fixed to an axle, there is generally a
hollow stationary drum at one end of the axle, and on the other end is
fixed a drum made of rundles. This rundle drum is turned by the toothed
wheel of a lower axle, which is itself turned by a wheel whose buckets
receive the impetus of water. If the locality supplies an abundance of
water this machine is most useful, because to turn the crank does not
need men who require pay, and because it forces air without cessation
through the conduit into the shaft.

[Illustration 207 (Ventilation Fans): A--First kind of fan. B--Second
kind of fan. C--Third kind of fan. D--Quadrangular part of axle.
E--Round part of same. F--Crank.]

Of the fans which are fixed on to an axle contained in a drum or box,
there are three sorts. The first sort is made of thin boards of such
length and width as the height and width of the drum or box require; the
second sort is made of boards of the same width, but shorter, to which
are bound long thin blades of poplar or some other flexible wood; the
third sort has boards like the last, to which are bound double and
triple rows of goose feathers. This last is less used than the second,
which in turn is less used than the first. The boards of the fan are
mortised into the quadrangular parts of the barrel axle.

[Illustration 208 (Bellows for mine ventilation): A--Smaller part of
shaft. B--Square conduit. C--Bellows. D--Larger part of shaft.]

Blowing machines of the third genus, which are no less varied and of no
fewer forms than those of the second genus, are made with bellows, for
by its blasts the shafts and tunnels are not only furnished with air
through conduits or pipes, but they can also be cleared by suction of
their heavy and pestilential vapours. In the latter case, when the
bellows is opened it draws the vapours from the conduits through its
blow-hole and sucks these vapours into itself; in the former case, when
it is compressed, it drives the air through its nozzle into the conduits
or pipes. They are compressed either by a man, or by a horse or by
water-power; if by a man, the lower board of a large bellows is fixed to
the timbers above the conduit which projects out of the shaft, and so
placed that when the blast is blown through the conduit, its nozzle is
set in the conduit. When it is desired to suck out heavy or pestilential
vapours, the blow-hole of the bellows is fitted all round the mouth of
the conduit. Fixed to the upper bellows board is a lever which couples
with another running downward from a little axle, into which it is
mortised so that it may remain immovable; the iron journals of this
little axle revolve in openings of upright posts; and so when the
workman pulls down the lever the upper board of the bellows is raised,
and at the same time the flap of the blow-hole is dragged open by the
force of the wind. If the nozzle of the bellows is enclosed in the
conduit it draws pure air into itself, but if its blow-hole is fitted
all round the mouth of the conduit it exhausts the heavy and
pestilential vapours out of the conduit and thus from the shaft, even if
it is one hundred and twenty feet deep. A stone placed on the upper
board of the bellows depresses it and then the flap of the blow-hole is
closed. The bellows, by the first method, blows fresh air into the
conduit through its nozzle, and by the second method blows out through
the nozzle the heavy and pestilential vapours which have been collected.
In this latter case fresh air enters through the larger part of the
shaft, and the miners getting the benefit of it can sustain their toil.
A certain smaller part of the shaft which forms a kind of estuary,
requires to be partitioned off from the other larger part by
uninterrupted lagging, which reaches from the top of the shaft to the
bottom; through this part the long but narrow conduit reaches down
nearly to the bottom of the shaft.

[Illustration 209 (Bellows for mine ventilation): A--Tunnel. B--Pipe.
C--Nozzle of double bellows.]

When no shaft has been sunk to such depth as to meet a tunnel driven far
into a mountain, these machines should be built in such a manner that
the workman can move them about. Close by the drains of the tunnel
through which the water flows away, wooden pipes should be placed and
joined tightly together in such a manner that they can hold the air;
these should reach from the mouth of the tunnel to its furthest end. At
the mouth of the tunnel the bellows should be so placed that through its
nozzle it can blow its accumulated blasts into the pipes or the conduit;
since one blast always drives forward another, they penetrate into the
tunnel and change the air, whereby the miners are enabled to continue
their work.

[Illustration 211 (Bellows for mine ventilation): A--Machine first
described. B--This workman, treading with his feet, is compressing the
bellows. C--Bellows without nozzles. D--Hole by which heavy vapours or
blasts are blown out. E--Conduits. F--Tunnel. G--Second machine
described. H--Wooden wheel. I--Its steps. K--Bars. L--Hole in same
wheel. M--Pole. N--Third machine described. O--Upright axle. P--Its
toothed drum. Q--Horizontal axle. R--Its drum which is made of rundles.]

If heavy vapours need to be drawn off from the tunnels, generally three
double or triple bellows, without nozzles and closed in the forepart,
are placed upon benches. A workman compresses them by treading with his
feet, just as persons compress those bellows of the organs which give
out varied and sweet sounds in churches. These heavy vapours are thus
drawn along the air-pipes and through the blow-hole of the lower bellows
board, and are expelled through the blow-hole of the upper bellows board
into the open air, or into some shaft or drift. This blow-hole has a
flap-valve, which the noxious blast opens, as often as it passes out.
Since one volume of air constantly rushes in to take the place of
another which has been drawn out by the bellows, not only is the heavy
air drawn out of a tunnel as great as 1,200 feet long, or even longer,
but also the wholesome air is naturally drawn in through that part of
the tunnel which is open outside the conduits. In this way the air is
changed, and the miners are enabled to carry on the work they have
begun. If machines of this kind had not been invented, it would be
necessary for miners to drive two tunnels into a mountain, and
continually, at every two hundred feet at most, to sink a shaft from the
upper tunnel to the lower one, that the air passing into the one, and
descending by the shafts into the other, would be kept fresh for the
miners; this could not be done without great expense.

There are two different machines for operating, by means of horses, the
above described bellows. The first of these machines has on its axle a
wooden wheel, the rim of which is covered all the way round by steps; a
horse is kept continually within bars, like those within which horses
are held to be shod with iron, and by treading these steps with its feet
it turns the wheel, together with the axle; the cams on the axle press
down the sweeps which compress the bellows. The way the instrument is
made which raises the bellows again, and also the benches on which the
bellows rest, I will explain more clearly in Book IX. Each bellows, if
it draws heavy vapours out of a tunnel, blows them out of the hole in
the upper board; if they are drawn out of a shaft, it blows them out
through its nozzle. The wheel has a round hole, which is transfixed with
a pole when the machine needs to be stopped.

The second machine has two axles; the upright one is turned by a horse,
and its toothed drum turns a drum made of rundles on a horizontal axle;
in other respects this machine is like the last. Here, also, the nozzles
of the bellows placed in the conduits blow a blast into the shaft or
tunnel.

[Illustration 212 (Ventilating with Damp Cloth): A--Tunnel. B--Linen
cloth.]

In the same way that this last machine can refresh the heavy air of a
shaft or tunnel, so also could the old system of ventilating by the
constant shaking of linen cloths, which Pliny[20] has explained; the air
not only grows heavier with the depth of a shaft, of which fact he has
made mention, but also with the length of a tunnel.

[Illustration 213 (Descent into Mines): A--Descending into the shaft by
ladders. B--By sitting on a stick. C--By sitting on the dirt.
D--Descending by steps cut in the rock.]

The climbing machines of miners are ladders, fixed to one side of the
shaft, and these reach either to the tunnel or to the bottom of the
shaft. I need not describe how they are made, because they are used
everywhere, and need not so much skill in their construction as care in
fixing them. However, miners go down into mines not only by the steps of
ladders, but they are also lowered into them while sitting on a stick or
a wicker basket, fastened to the rope of one of the three drawing
machines which I described at first. Further, when the shafts are much
inclined, miners and other workmen sit in the dirt which surrounds their
loins and slide down in the same way that boys do in winter-time when
the water on some hillside has congealed with the cold, and to prevent
themselves from falling, one arm is wound about a rope, the upper end of
which is fastened to a beam at the mouth of the shaft, and the lower end
to a stake fixed in the bottom of the shaft. In these three ways miners
descend into the shafts. A fourth way may be mentioned which is employed
when men and horses go down to the underground machines and come up
again, that is by inclined shafts which are twisted like a screw and
have steps cut in the rock, as I have already described.

It remains for me to speak of the ailments and accidents of miners, and
of the methods by which they can guard against these, for we should
always devote more care to maintaining our health, that we may freely
perform our bodily functions, than to making profits. Of the illnesses,
some affect the joints, others attack the lungs, some the eyes, and
finally some are fatal to men.

Where water in shafts is abundant and very cold, it frequently injures
the limbs, for cold is harmful to the sinews. To meet this, miners
should make themselves sufficiently high boots of rawhide, which protect
their legs from the cold water; the man who does not follow this advice
will suffer much ill-health, especially when he reaches old age. On the
other hand, some mines are so dry that they are entirely devoid of
water, and this dryness causes the workmen even greater harm, for the
dust which is stirred and beaten up by digging penetrates into the
windpipe and lungs, and produces difficulty in breathing, and the
disease which the Greeks call [Greek: asthma]. If the dust has corrosive
qualities, it eats away the lungs, and implants consumption in the body;
hence in the mines of the Carpathian Mountains women are found who have
married seven husbands, all of whom this terrible consumption has
carried off to a premature death. At Altenberg in Meissen there is found
in the mines black _pompholyx_, which eats wounds and ulcers to the
bone; this also corrodes iron, for which reason the keys of their sheds
are made of wood. Further, there is a certain kind of _cadmia_[21] which
eats away the feet of the workmen when they have become wet, and
similarly their hands, and injures their lungs and eyes. Therefore, for
their digging they should make for themselves not only boots of
rawhide, but gloves long enough to reach to the elbow, and they should
fasten loose veils over their faces; the dust will then neither be drawn
through these into their windpipes and lungs, nor will it fly into their
eyes. Not dissimilarly, among the Romans[22] the makers of vermilion
took precautions against breathing its fatal dust.

Stagnant air, both that which remains in a shaft and that which remains
in a tunnel, produces a difficulty in breathing; the remedies for this
evil are the ventilating machines which I have explained above. There is
another illness even more destructive, which soon brings death to men
who work in those shafts or levels or tunnels in which the hard rock is
broken by fire. Here the air is infected with poison, since large and
small veins and seams in the rocks exhale some subtle poison from the
minerals, which is driven out by the fire, and this poison itself is
raised with the smoke not unlike _pompholyx_,[23] which clings to the
upper part of the walls in the works in which ore is smelted. If this
poison cannot escape from the ground, but falls down into the pools and
floats on their surface, it often causes danger, for if at any time the
water is disturbed through a stone or anything else, these fumes rise
again from the pools and thus overcome the men, by being drawn in with
their breath; this is even much worse if the fumes of the fire have not
yet all escaped. The bodies of living creatures who are infected with
this poison generally swell immediately and lose all movement and
feeling, and they die without pain; men even in the act of climbing from
the shafts by the steps of ladders fall back into the shafts when the
poison overtakes them, because their hands do not perform their office,
and seem to them to be round and spherical, and likewise their feet. If
by good fortune the injured ones escape these evils, for a little while
they are pale and look like dead men. At such times, no one should
descend into the mine or into the neighbouring mines, or if he is in
them he should come out quickly. Prudent and skilled miners burn the
piles of wood on Friday, towards evening, and they do not descend into
the shafts nor enter the tunnels again before Monday, and in the
meantime the poisonous fumes pass away.

There are also times when a reckoning has to be made with Orcus,[24] for
some metalliferous localities, though such are rare, spontaneously
produce poison and exhale pestilential vapour, as is also the case with
some openings in the ore, though these more often contain the noxious
fumes. In the towns of the plains of Bohemia there are some caverns
which, at certain seasons of the year, emit pungent vapours which put
out lights and kill the miners if they linger too long in them. Pliny,
too, has left a record that when wells are sunk, the sulphurous or
aluminous vapours which arise kill the well-diggers, and it is a test of
this danger if a burning lamp which has been let down is extinguished.
In such cases a second well is dug to the right or left, as an
air-shaft, which draws off these noxious vapours. On the plains they
construct bellows which draw up these noxious vapours and remedy this
evil; these I have described before.

Further, sometimes workmen slipping from the ladders into the shafts
break their arms, legs, or necks, or fall into the sumps and are
drowned; often, indeed, the negligence of the foreman is to blame, for
it is his special work both to fix the ladders so firmly to the timbers
that they cannot break away, and to cover so securely with planks the
sumps at the bottom of the shafts, that the planks cannot be moved nor
the men fall into the water; wherefore the foreman must carefully
execute his own work. Moreover, he must not set the entrance of the
shaft-house toward the north wind, lest in winter the ladders freeze
with cold, for when this happens the men's hands become stiff and
slippery with cold, and cannot perform their office of holding. The men,
too, must be careful that, even if none of these things happen, they do
not fall through their own carelessness.

Mountains, too, slide down and men are crushed in their fall and perish.
In fact, when in olden days Rammelsberg, in Goslar, sank down, so many
men were crushed in the ruins that in one day, the records tell us,
about 400 women were robbed of their husbands. And eleven years ago,
part of the mountain of Altenberg, which had been excavated, became
loose and sank, and suddenly crushed six miners; it also swallowed up a
hut and one mother and her little boy. But this generally occurs in
those mountains which contain _venae cumulatae_. Therefore, miners
should leave numerous arches under the mountains which need support, or
provide underpinning. Falling pieces of rock also injure their limbs,
and to prevent this from happening, miners should protect the shafts,
tunnels, and drifts.

The venomous ant which exists in Sardinia is not found in our mines.
This animal is, as Solinus[25] writes, very small and like a spider in
shape; it is called _solifuga_, because it shuns (_fugit_) the light
(_solem_). It is very common in silver mines; it creeps unobserved and
brings destruction upon those who imprudently sit on it. But, as the
same writer tells us, springs of warm and salubrious waters gush out in
certain places, which neutralise the venom inserted by the ants.

In some of our mines, however, though in very few, there are other
pernicious pests. These are demons of ferocious aspect, about which I
have spoken in my book _De Animantibus Subterraneis_. Demons of this
kind are expelled and put to flight by prayer and fasting.[26]

Some of these evils, as well as certain other things, are the reason why
pits are occasionally abandoned. But the first and principal cause is
that they do not yield metal, or if, for some fathoms, they do bear
metal they become barren in depth. The second cause is the quantity of
water which flows in; sometimes the miners can neither divert this water
into the tunnels, since tunnels cannot be driven so far into the
mountains, or they cannot draw it out with machines because the shafts
are too deep; or if they could draw it out with machines, they do not
use them, the reason undoubtedly being that the expenditure is greater
than the profits of a moderately poor vein. The third cause is the
noxious air, which the owners sometimes cannot overcome either by skill
or expenditure, for which reason the digging is sometimes abandoned, not
only of shafts, but also of tunnels. The fourth cause is the poison
produced in particular places, if it is not in our power either
completely to remove it or to moderate its effects. This is the reason
why the caverns in the Plain known as Laurentius[27] used not to be
worked, though they were not deficient in silver. The fifth cause are
the fierce and murderous demons, for if they cannot be expelled, no one
escapes from them. The sixth cause is that the underpinnings become
loosened and collapse, and a fall of the mountain usually follows; the
underpinnings are then only restored when the vein is very rich in
metal. The seventh cause is military operations. Shafts and tunnels
should not be re-opened unless we are quite certain of the reasons why
the miners have deserted them, because we ought not to believe that our
ancestors were so indolent and spiritless as to desert mines which could
have been carried on with profit. Indeed, in our own days, not a few
miners, persuaded by old women's tales, have re-opened deserted shafts
and lost their time and trouble. Therefore, to prevent future
generations from being led to act in such a way, it is advisable to set
down in writing the reason why the digging of each shaft or tunnel has
been abandoned, just as it is agreed was once done at Freiberg, when the
shafts were deserted on account of the great inrush of water.

     END OF BOOK VI.


FOOTNOTES:

[1] This Book is devoted in the main to winding, ventilating, and
pumping machinery. Their mechanical principles are very old. The block
and pulley, the windlass, the use of water-wheels, the transmission of
power through shafts and gear-wheels, chain-pumps, piston-pumps with
valves, were all known to the Greeks and Romans, and possibly earlier.
Machines involving these principles were described by Ctesibius, an
Alexandrian of 250 B.C., by Archimedes (287-212 B.C.), and by Vitruvius
(1st Century B.C.) As to how far these machines were applied to mining
by the Ancients we have but little evidence, and this largely in
connection with handling water. Diodorus Siculus (1st Century B.C.)
referring to the Spanish mines, says (Book V.): "Sometimes at great
depths they meet great rivers underground, but by art give check to the
violence of the streams, for by cutting trenches they divert the
current, and being sure to gain what they aim at when they have begun,
they never leave off till they have finished it. And they admirably pump
out the water with those instruments called Egyptian pumps, invented by
Archimedes, the Syracusan, when he was in Egypt. By these, with constant
pumping by turns they throw up the water to the mouth of the pit and
thus drain the mine; for this engine is so ingeniously contrived that a
vast quantity of water is strangely and with little labour cast out."

Strabo (63 B.C.-24 A.D., III., 2, 9), also referring to Spanish mines,
quoting from Posidonius (about 100 B.C.), says: "He compares with these
(the Athenians) the activity and diligence of the Turdetani, who are in
the habit of cutting tortuous and deep tunnels, and draining the streams
which they frequently encounter by means of Egyptian screws."
(Hamilton's Tran., Vol. I., p. 221). The "Egyptian screw" was
Archimedes' screw, and was thus called because much used by the
Egyptians for irrigation. Pliny (XXXIII., 31) also says, in speaking of
the Spanish silver-lead mines: "The mountain has been excavated for a
distance of 1,500 paces, and along this distance there are
water-carriers standing by torch-light night and day steadily baling the
water (thus) making quite a river." The re-opening of the mines at Rio
Tinto in the middle of the 18th Century disclosed old Roman stopes, in
which were found several water-wheels. These were about 15 feet in
diameter, lifting the water by the reverse arrangement to an overshot
water-wheel. A wooden Archimedian screw was also found in the
neighbourhood. (Nash, The Rio Tinto Mine, its History and Romance,
London, 1904).

Until early in the 18th Century, water formed the limiting factor in the
depth of mines. To the great devotion to this water problem we owe the
invention of the steam engine. In 1705 Newcomen--no doubt inspired by
Savery's unsuccessful attempt--invented his engine, and installed the
first one on a colliery at Wolverhampton, in Staffordshire. With its
success, a new era was opened to the miner, to be yet further extended
by Watt's improvements sixty years later. It should be a matter of
satisfaction to mining engineers that not only was the steam engine the
handiwork of their profession, but that another mining engineer,
Stephenson, in his effort to further the advance of his calling,
invented the locomotive.

[2] While these particular tools serve the same purpose as the "gad" and
the "moil," the latter are not fitted with handles, and we have,
therefore, not felt justified in adopting these terms, but have given a
literal rendering of the Latin.

The Latin and old German terms for these tools were:--

  First Iron tool = _Ferramentum primum_    = _Bergeisen_.
  Second   "      =      "      _secundum_  = _Rutzeisen_.
  Third    "      =      "      _tertium_   = _Sumpffeisen_.
  Fourth   "      =      "      _quartum_   = _Fimmel_.
  Wedge           = _Cuneus_                = _Keil_.
  Iron block      = _Lamina_                = _Plotz_.
  Iron plate      = _Bractea_               = _Feder_.

The German words obviously had local value and do not bear translation
literally.

[3] One _metreta_, a Greek measure, equalled about nine English gallons,
and a _congius_ contained about six pints.

[4] _Ingestores_. This is a case of Agricola coining a name for workmen
from the work, the term being derived from _ingero_, to pour or to throw
in, used in the previous clause--hence the "reason." See p. xxxi.

[5] _Cisium_. A two-wheeled cart. In the preface Agricola gives this as
an example of his intended adaptations. See p. xxxi.

[6] _Canis_. The Germans in Agricola's time called a truck a _hundt_--a
hound.

[7] _Alveus_,--"Tray." The Spanish term _batea_ has been so generally
adopted into the mining vocabulary for a wooden bowl for these purposes,
that we introduce it here.

[8] Pliny (XXXIII., 21). "The fragments are carried on workmen's
shoulders; night and day each passes the material to his neighbour, only
the last of them seeing the daylight."

[10] _Harpago_,--A "grapple" or "hook."

[11] Ancient Noricum covered the region of modern Tyrol, with parts of
Bavaria, Salzburg, etc.

[12] _Machina quae pilis aquas haurit_. "Machine which draws water with
balls." This apparatus is identical with the Cornish "rag and chain
pump" of the same period, and we have therefore adopted that term.

[13] A _congius_ contained about six pints.

[14] Vitruvius (X., 9). "But if the water is to be supplied to still
higher places, a double chain of iron is made to revolve on the axis of
the wheel, long enough to reach to the lower level. This is furnished
with brazen buckets, each holding about a _congius_. Then by turning the
wheel, the chain also turns upon the axis and brings the buckets to the
top thereof, on passing which they are inverted and pour into the
conduits the water they have raised."

[15] This description certainly does not correspond in every particular
with the illustration.

[16] There is a certain deficiency in the hydraulics of this machine.

[17] The dimensions given in this description for the various members do
not tally.

[18] _Melibocian_,--the Harz.

[19] In the original text this is given as "lower," and appears to be an
error.

[20] Pliny (XXXI, 28). "In deep wells, the occurrence of _sulphurata_ or
_aluminosa_ vapor is fatal to the diggers. The presence of this peril is
shown if a lighted lamp let down into the well is extinguished. If so,
other wells are sunk to the right and left, which carry off these
noxious gases. Apart from these evils, the air itself becomes noxious
with depth, which can be remedied by constantly shaking linen cloths,
thus setting the air in motion."

[21] This is given in the German translation as _kobelt_. The _kobelt_
(or _cobaltum_ of Agricola) was probably arsenical-cobalt, a mineral
common in the Saxon mines. The origin of the application of the word
cobalt to a mineral appears to lie in the German word for the gnomes and
goblins (_kobelts_) so universal to Saxon miners' imaginations,--this
word in turn probably being derived from the Greek _cobali_ (mimes). The
suffering described above seems to have been associated with the
malevolence of demons, and later the word for these demons was attached
to this disagreeable ore. A quaint series of mining "sermons," by Johann
Mathesius, entitled _Sarepta oder Bergpostill_, Nuernberg, 1562, contains
the following passage (p. 154) which bears out this view. We retain the
original and varied spelling of cobalt and also add another view of
Mathesius, involving an experience of Solomon and Hiram of Tyre with
some mines containing cobalt.

"Sometimes, however, from dry hard veins a certain black, greenish, grey
or ash-coloured earth is dug out, often containing good ore, and this
mineral being burnt gives strong fumes and is extracted like 'tutty.' It
is called _cadmia fossilis_. You miners call it _cobelt_. Germans call
the Black Devil and the old Devil's furies, old and black _cobel_, who
injure people and their cattle with their witchcrafts. Now the Devil is
a wicked, malicious spirit, who shoots his poisoned darts into the
hearts of men, as sorcerers and witches shoot at the limbs of cattle and
men, and work much evil and mischief with _cobalt_ or _hipomane_ or
horses' poison. After quicksilver and _rotgueltigen_ ore, are _cobalt_
and _wismuth_ fumes; these are the most poisonous of the metals, and
with them one can kill flies, mice, cattle, birds, and men. So, fresh
_cobalt_ and _kisswasser_ (vitriol?) devour the hands and feet of
miners, and the dust and fumes of _cobalt_ kill many mining people and
workpeople who do much work among the fumes of the smelters. Whether or
not the Devil and his hellish crew gave their name to _cobelt_, or
_kobelt_, nevertheless, _cobelt_ is a poisonous and injurious metal even
if it contains silver. I find in I. Kings 9, the word _Cabul_. When
Solomon presented twenty towns in Galilee to the King of Tyre, Hiram
visited them first, and would not have them, and said the land was well
named _Cabul_ as Joshua had christened it. It is certain from Joshua
that these twenty towns lay in the Kingdom of Aser, not far from our
_Sarepta_, and that there had been iron and copper mines there, as Moses
says in another place. Inasmuch, then, as these twenty places were
mining towns, and _cobelt_ is a metal, it appears quite likely that the
mineral took its name from the land of Cabul. History and circumstances
bear out the theory that Hiram was an excellent and experienced miner,
who obtained much gold from Ophir, with which he honoured Solomon.
Therefore, the Great King wished to show his gratitude to his good
neighbour by honouring a miner with mining towns. But because the King
of Tyre was skilled in mines, he first inspected the new mines, and saw
that they only produced poor metal and much wild _cobelt_ ore, therefore
he preferred to find his gold by digging the gold and silver in India
rather than by getting it by the _cobelt_ veins and ore. For truly,
_cobelt_ ores are injurious, and are usually so embedded in other ore
that they rob them in the fire and consume (_madtet und frist_) much
lead before the silver is extracted, and when this happens it is
especially _speysig_. Therefore Hiram made a good reckoning as to the
mines and would not undertake all the expense of working and smelting,
and so returned Solomon the twenty towns."

[22] Pliny (XXXIII, 40). "Those employed in the works preparing
vermilion, cover their faces with a bladder-skin, that they may not
inhale the pernicious powder, yet they can see through the skin."

[23] _Pompholyx_ was a furnace deposit, usually mostly zinc oxide, but
often containing arsenical oxide, and to this latter quality this
reference probably applies. The symptoms mentioned later in the text
amply indicate arsenical poisoning, of which a sort of spherical effect
on the hands is characteristic. See also note on p. 112 for discussion
of "corrosive" _cadmia_; further information on _pompholyx_ is given in
Note 26, p. 394.

[24] Orcus, the god of the infernal regions,--otherwise Pluto.

[25] Caius Julius Solinus was an unreliable Roman Grammarian of the 3rd
Century. There is much difference of opinion as to the precise animal
meant by _solifuga_. The word is variously spelled _solipugus, solpugus,
solipuga, solipunga_, etc., and is mentioned by Pliny (VIII., 43), and
other ancient authors all apparently meaning a venomous insect, either
an ant or a spider. The term in later times indicated a scorpion.

[26] The presence of demons or gnomes in the mines was so general a
belief that Agricola fully accepted it. This is more remarkable, in view
of our author's very general scepticism regarding the supernatural. He,
however, does not classify them all as bad--some being distinctly
helpful. The description of gnomes of kindly intent, which is contained
in the last paragraph in _De Animantibus_ is of interest:--

"Then there are the gentle kind which the Germans as well as the Greeks
call cobalos, because they mimic men. They appear to laugh with glee and
pretend to do much, but really do nothing. They are called little
miners, because of their dwarfish stature, which is about two feet. They
are venerable looking and are clothed like miners in a filleted garment
with a leather apron about their loins. This kind does not often trouble
the miners, but they idle about in the shafts and tunnels and really do
nothing, although they pretend to be busy in all kinds of labour,
sometimes digging ore, and sometimes putting into buckets that which has
been dug. Sometimes they throw pebbles at the workmen, but they rarely
injure them unless the workmen first ridicule or curse them. They are
not very dissimilar to Goblins, which occasionally appear to men when
they go to or from their day's work, or when they attend their cattle.
Because they generally appear benign to men, the Germans call them
_guteli_. Those called _trulli_, which take the form of women as well as
men, actually enter the service of some people, especially the _Suions_.
The mining gnomes are especially active in the workings where metal has
already been found, or where there are hopes of discovering it, because
of which they do not discourage the miners, but on the contrary
stimulate them and cause them to labour more vigorously."

The German miners were not alone in such beliefs, for miners generally
accepted them--even to-day the faith in "knockers" has not entirely
disappeared from Cornwall. Neither the sea nor the forest so lends
itself to the substantiation of the supernatural as does the mine. The
dead darkness, in which the miners' lamps serve only to distort every
shape, the uncanny noises of restless rocks whose support has been
undermined, the approach of danger and death without warning, the sudden
vanishing or discovery of good fortune, all yield a thousand
corroborations to minds long steeped in ignorance and prepared for the
miraculous through religious teaching.

[27] The Plains of Laurentius extend from the mouth of the Tiber
southward--say twenty miles south of Rome. What Agricola's authority was
for silver mines in this region we cannot discover. This may, however,
refer to the lead-silver district of the Attic Peninsula, Laurion being
sometimes Latinized as _Laurium_ or _Laurius_.




BOOK VII.


Since the Sixth Book has described the iron tools, the vessels and the
machines used in mines, this Book will describe the methods of
assaying[1] ores; because it is desirable to first test them in order
that the material mined may be advantageously smelted, or that the dross
may be purged away and the metal made pure. Although writers have
mentioned such tests, yet none of them have set down the directions for
performing them, wherefore it is no wonder that those who come later
have written nothing on the subject. By tests of this kind miners can
determine with certainty whether ores contain any metal in them or not;
or if it has already been indicated that the ore contains one or more
metals, the tests show whether it is much or little; the miners also
ascertain by such tests the method by which the metal can be separated
from that part of the ore devoid of it; and further, by these tests,
they determine that part in which there is much metal from that part in
which there is little. Unless these tests have been carefully applied
before the metals are melted out, the ore cannot be smelted without
great loss to the owners, for the parts which do not easily melt in the
fire carry the metals off with them or consume them. In the last case,
they pass off with the fumes; in the other case they are mixed with the
slag and furnace accretions, and in such event the owners lose the
labour which they have spent in preparing the furnaces and the
crucibles, and further, it is necessary for them to incur fresh
expenditure for fluxes and other things. Metals, when they have been
melted out, are usually assayed in order that we may ascertain what
proportion of silver is in a _centumpondium_ of copper or lead, or what
quantity of gold is in one _libra_ of silver; and, on the other hand,
what proportion of copper or lead is contained in a _centumpondium_ of
silver, or what quantity of silver is contained in one _libra_ of gold.
And from this we can calculate whether it will be worth while to
separate the precious metals from the base metals, or not. Further, a
test of this kind shows whether coins are good or are debased; and
readily detects silver, if the coiners have mixed more than is lawful
with the gold; or copper, if the coiners have alloyed with the gold or
silver more of it than is allowable. I will explain all these methods
with the utmost care that I can.

The method of assaying ore used by mining people, differs from smelting
only by the small amount of material used. Inasmuch as, by smelting a
small quantity, they learn whether the smelting of a large quantity
will compensate them for their expenditure; hence, if they are not
particular to employ assays, they may, as I have already said, sometimes
smelt the metal from the ore with a loss or sometimes without any
profit; for they can assay the ore at a very small expense, and smelt
it only at a great expense. Both processes, however, are carried out in
the same way, for just as we assay ore in a little furnace, so do we
smelt it in the large furnace. Also in both cases charcoal and not wood
is burned. Moreover, in the crucible when metals are tested, be they
gold, silver, copper, or lead, they are mixed in precisely the same way
as they are mixed in the blast furnace when they are smelted. Further,
those who assay ores with fire, either pour out the metal in a liquid
state, or, when it has cooled, break the crucible and clean the metal
from slag; and in the same way the smelter, as soon as the metal flows
from the furnace into the forehearth, pours in cold water and takes the
slag from the metal with a hooked bar. Finally, in the same way that
gold and silver are separated from lead in a cupel, so also are they
separated in the cupellation furnace.

It is necessary that the assayer who is testing ore or metals should be
prepared and instructed in all things necessary in assaying, and that he
should close the doors of the room in which the assay furnace stands,
lest anyone coming at an inopportune moment might disturb his thoughts
when they are intent on the work. It is also necessary for him to place
his balances in a case, so that when he weighs the little buttons of
metal the scales may not be agitated by a draught of air, for that is a
hindrance to his work.

[Illustration 223a (Muffle Furnace): Round assay furnace.]

[Illustration 223b (Muffle Furnace): Rectangular assay furnace.]

[Illustration 224 (Muffle Assay Furnace): A--Openings in the plate.
B--Part of plate which projects beyond the furnace.]

Now I will describe the different things which are necessary in
assaying, beginning with the assay furnace, of which one differs from
another in shape, material, and the place in which it is set. In shape,
they may be round or rectangular, the latter shape being more suited to
assaying ores. The materials of the assay furnaces differ, in that one
is made of bricks, another of iron, and certain ones of clay. The one of
bricks is built on a chimney-hearth which is three and a half feet high;
the iron one is placed in the same position, and also the one of clay.
The brick one is a cubit high, a foot wide on the inside, and one foot
two digits long; at a point five digits above the hearth--which is
usually the thickness of an unbaked[2] brick--an iron plate is laid, and
smeared over with lute on the upper side to prevent it from being
injured by the fire; in front of the furnace above the plate is a mouth
a palm high, five digits wide, and rounded at the top. The iron plate
has three openings which are one digit wide and three digits long, one
is at each side and the third at the back; through them sometimes the
ash falls from the burning charcoal, and sometimes the draught blows
through the chamber which is below the iron plate, and stimulates the
fire. For this reason this furnace when used by metallurgists is named
from assaying, but when used by the alchemists it is named from the
wind[3]. The part of the iron plate which projects from the furnace is
generally three-quarters of a palm long and a palm wide; small pieces
of charcoal, after being laid thereon, can be placed quickly in the
furnace through its mouth with a pair of tongs, or again, if necessary,
can be taken out of the furnace and laid there.

The iron assay furnace is made of four iron bars a foot and a half high;
which at the bottom are bent outward and broadened a short distance to
enable them to stand more firmly; the front part of the furnace is made
from two of these bars, and the back part from two of them; to these
bars on both sides are joined and welded three iron cross-bars, the
first at a height of a palm from the bottom, the second at a height of a
foot, and the third at the top. The upright bars are perforated at that
point where the side cross-bars are joined to them, in order that three
similar iron bars on the remaining sides can be engaged in them; thus
there are twelve cross-bars, which make three stages at unequal
intervals. At the lower stage, the upright bars are distant from each
other one foot and five digits; and at the middle stage the front is
distant from the back three palms and one digit, and the sides are
distant from each other three palms and as many digits; at the highest
stage from the front to the back there is a distance of two palms, and
between the sides three palms, so that in this way the furnace becomes
narrower at the top. Furthermore, an iron rod, bent to the shape of the
mouth, is set into the lowest bar of the front; this mouth, just like
that of the brick furnace, is a palm high and five digits wide. Then the
front cross-bar of the lower stage is perforated on each side of the
mouth, and likewise the back one; through these perforations there pass
two iron rods, thus making altogether four bars in the lower stage, and
these support an iron plate smeared with lute; part of this plate also
projects outside the furnace. The outside of the furnace from the lower
stage to the upper, is covered with iron plates, which are bound to the
bars by iron wires, and smeared with lute to enable them to bear the
heat of the fire as long as possible.

As for the clay furnace, it must be made of fat, thick clay, medium so
far as relates to its softness or hardness. This furnace has exactly the
same height as the iron one, and its base is made of two earthenware
tiles, one foot and three palms long and one foot and one palm wide.
Each side of the fore part of both tiles is gradually cut away for the
length of a palm, so that they are half a foot and a digit wide, which
part projects from the furnace; the tiles are about a digit and a half
thick. The walls are similarly of clay, and are set on the lower tiles
at a distance of a digit from the edge, and support the upper tiles; the
walls are three digits high and have four openings, each of which is
about three digits high; those of the back part and of each side are
five digits wide, and of the front, a palm and a half wide, to enable
the freshly made cupels to be conveniently placed on the hearth, when it
has been thoroughly warmed, that they may be dried there. Both tiles are
bound on the outer edge with iron wire, pressed into them, so that they
will be less easily broken; and the tiles, not unlike the iron
bed-plate, have three openings three digits long and a digit wide, in
order that when the upper one on account of the heat of the fire or for
some other reason has become damaged, the lower one may be exchanged and
take its place. Through these holes, the ashes from the burning
charcoal, as I have stated, fall down, and air blows into the furnace
after passing through the openings in the walls of the chamber. The
furnace is rectangular, and inside at the lower part it is three palms
and one digit wide and three palms and as many digits long. At the upper
part it is two palms and three digits wide, so that it also grows
narrower; it is one foot high; in the middle of the back it is cut out
at the bottom in the shape of a semicircle, of half a digit radius. Not
unlike the furnace before described, it has in its forepart a mouth
which is rounded at the top, one palm high and a palm and a digit wide.
Its door is also made of clay, and this has a window and a handle; even
the lid of the furnace which is made of clay has its own handle,
fastened on with iron wire. The outer parts and sides of this furnace
are bound with iron wires, which are usually pressed in, in the shape of
triangles. The brick furnaces must remain stationary; the clay and iron
ones can be carried from one place to another. Those of brick can be
prepared more quickly, while those of iron are more lasting, and those
of clay are more suitable. Assayers also make temporary furnaces in
another way; they stand three bricks on a hearth, one on each side and a
third one at the back, the forepart lies open to the draught, and on
these bricks is placed an iron plate, upon which they again stand three
bricks, which hold and retain the charcoal.

The setting of one furnace differs from another, in that some are placed
higher and others lower; that one is placed higher, in which the man who
is assaying the ore or metals introduces the scorifier through the mouth
with the tongs; that one is placed lower, into which he introduces the
crucible through its open top.

[Illustration 227 (Crucible Assay Furnace): A--Iron hoop. B--Double
bellows. C--Its nozzle. D--Lever.]

In some cases the assayer uses an iron hoop[4] in place of a furnace;
this is placed upon the hearth of a chimney, the lower edge being daubed
with lute to prevent the blast of the bellows from escaping under it. If
the blast is given slowly, the ore will be smelted and the copper will
melt in the triangular crucible, which is placed in it and taken away
again with the tongs. The hoop is two palms high and half a digit thick;
its diameter is generally one foot and one palm, and where the blast
from the bellows enters into it, it is notched out. The bellows is a
double one, such as goldworkers use, and sometimes smiths. In the middle
of the bellows there is a board in which there is an air-hole, five
digits wide and seven long, covered by a little flap which is fastened
over the air-hole on the lower side of the board; this flap is of equal
length and width. The bellows, without its head, is three feet long, and
at the back is one foot and one palm wide and somewhat rounded, and it
is three palms wide at the head; the head itself is three palms long and
two palms and a digit wide at the part where it joins the boards, then
it gradually becomes narrower. The nozzle, of which there is only one,
is one foot and two digits long; this nozzle, and one-half of the head
in which the nozzle is fixed, are placed in an opening of the wall, this
being one foot and one palm thick; it reaches only to the iron hoop on
the hearth, for it does not project beyond the wall. The hide of the
bellows is fixed to the bellows-boards with its own peculiar kind of
iron nails. It joins both bellows-boards to the head, and over it there
are cross strips of hide fixed to the bellows-boards with broad-headed
nails, and similarly fixed to the head. The middle board of the bellows
rests on an iron bar, to which it is fastened with iron nails clinched
on both ends, so that it cannot move; the iron bar is fixed between two
upright posts, through which it penetrates. Higher up on these upright
posts there is a wooden axle, with iron journals which revolve in the
holes in the posts. In the middle of this axle there is mortised a
lever, fixed with iron nails to prevent it from flying out; the lever is
five and a half feet long, and its posterior end is engaged in the iron
ring of an iron rod which reaches to the "tail" of the lowest
bellows-board, and there engages another similar ring. And so when the
workman pulls down the lever, the lower part of the bellows is raised
and drives the wind into the nozzle; then the wind, penetrating through
the hole in the middle bellows-board, which is called the air-hole,
lifts up the upper part of the bellows, upon whose upper board is a
piece of lead, heavy enough to press down that part of the bellows
again, and this being pressed down blows a blast through the nozzle.
This is the principle of the double bellows, which is peculiar to the
iron hoop where are placed the triangular crucibles in which copper ore
is smelted and copper is melted.

[Illustration 228 (Muffles): A--Broad little windows of muffle.
B--Narrow ones. C--Openings in the back thereof.]

I have spoken of the furnaces and the iron hoop; I will now speak of the
muffles and the crucibles. The muffle is made of clay, in the shape of
an inverted gutter tile; it covers the scorifiers, lest coal dust fall
into them and interfere with the assay. It is a palm and a half broad,
and the height, which corresponds with the mouth of the furnace, is
generally a palm, and it is nearly as long as the furnace; only at the
front end does it touch the mouth of the furnace, everywhere else on the
sides and at the back there is a space of three digits, to allow the
charcoal to lie in the open space between it and the furnace. The muffle
is as thick as a fairly thick earthen jar; its upper part is entire; the
back has two little windows, and each side has two or three or even
four, through which the heat passes into the scorifiers and melts the
ore. In place of little windows, some muffles have small holes, ten in
the back and more on each side. Moreover, in the back below the little
windows, or small holes, there are cut away three semi-circular notches
half a digit high, and on each side there are four. The back of the
muffle is generally a little lower than the front.

[Illustration 229 (Containers): A--Scorifier. B--Triangular crucible.
C--Cupel.]

The crucibles differ in the materials from which they are made, because
they are made of either clay or ashes; and those of clay, which we also
call "earthen," differ in shape and size. Some are made in the shape of
a moderately thick salver (scorifiers), three digits wide, and of a
capacity of an _uncia_ measure; in these the ore mixed with fluxes is
melted, and they are used by those who assay gold or silver ore. Some
are triangular and much thicker and more capacious, holding five, or
six, or even more _unciae_; in these copper is melted, so that it can be
poured out, expanded, and tested with fire, and in these copper ore is
usually melted.

The cupels are made of ashes; like the preceding scorifiers they are
tray-shaped, and their lower part is very thick but their capacity is
less. In these lead is separated from silver, and by them assays are
concluded. Inasmuch as the assayers themselves make the cupels,
something must be said about the material from which they are made, and
the method of making them. Some make them out of all kinds of ordinary
ashes; these are not good, because ashes of this kind contain a certain
amount of fat, whereby such cupels are easily broken when they are hot.
Others make them likewise out of any kind of ashes which have been
previously leached; of this kind are the ashes into which warm water has
been infused for the purpose of making lye. These ashes, after being
dried in the sun or a furnace, are sifted in a hair sieve; and although
warm water washes away the fat from the ashes, still the cupels which
are made from such ashes are not very good because they often contain
charcoal dust, sand, and pebbles. Some make them in the same way out of
any kind of ashes, but first of all pour water into the ashes and remove
the scum which floats thereon; then, after it has become clear, they
pour away the water, and dry the ashes; they then sift them and make the
cupels from them. These, indeed, are good, but not of the best quality,
because ashes of this kind are also not devoid of small pebbles and
sand. To enable cupels of the best quality to be made, all the
impurities must be removed from the ashes. These impurities are of two
kinds; the one sort light, to which class belong charcoal dust and fatty
material and other things which float in water, the other sort heavy,
such as small stones, fine sand, and any other materials which settle in
the bottom of a vessel. Therefore, first of all, water should be poured
into the ashes and the light impurities removed; then the ashes should
be kneaded with the hands, so that they will become properly mixed with
the water. When the water has become muddy and turbid, it should be
poured into a second vessel. In this way the small stones and fine sand,
or any other heavy substance which may be there, remain in the first
vessel, and should be thrown away. When all the ashes have settled in
this second vessel, which will be shown if the water has become clear
and does not taste of the flavour of lye, the water should be thrown
away, and the ashes which have settled in the vessel should be dried in
the sun or in a furnace. This material is suitable for the cupels,
especially if it is the ash of beech wood or other wood which has a
small annual growth; those ashes made from twigs and limbs of vines,
which have rapid annual growth, are not so good, for the cupels made
from them, since they are not sufficiently dry, frequently crack and
break in the fire and absorb the metals. If ashes of beech or similar
wood are not to be had, the assayer makes little balls of such ashes as
he can get, after they have been cleared of impurities in the manner
before described, and puts them in a baker's or potter's oven to burn,
and from these the cupels are made, because the fire consumes whatever
fat or damp there may be. As to all kinds of ashes, the older they are
the better, for it is necessary that they should have the greatest
possible dryness. For this reason ashes obtained from burned bones,
especially from the bones of the heads of animals, are the most suitable
for cupels, as are also those ashes obtained from the horns of deer and
the spines of fishes. Lastly, some take the ashes which are obtained
from burnt scrapings of leather, when the tanners scrape the hides to
clear them from hair. Some prefer to use compounds, that one being
recommended which has one and a half parts of ashes from the bones of
animals or the spines of fishes, and one part of beech ashes, and half a
part of ashes of burnt hide scrapings. From this mixture good cupels are
made, though far better ones are obtained from equal portions of ashes
of burnt hide scrapings, ashes of the bones of heads of sheep and
calves, and ashes of deer horns. But the best of all are produced from
deer horns alone, burnt to powder; this kind, by reason of its extreme
dryness, absorbs metals least of all. Assayers of our own day, however,
generally make the cupels from beech ashes. These ashes, after being
prepared in the manner just described, are first of all sprinkled with
beer or water, to make them stick together, and are then ground in a
small mortar. They are ground again after being mixed with the ashes
obtained from the skulls of beasts or from the spines of fishes; the
more the ashes are ground the better they are. Some rub bricks and
sprinkle the dust so obtained, after sifting it, into the beech ashes,
for dust of this kind does not allow the hearth-lead to absorb the gold
or silver by eating away the cupels. Others, to guard against the same
thing, moisten the cupels with white of egg after they have been made,
and when they have been dried in the sun, again crush them; especially
if they want to assay in it an ore of copper which contains iron. Some
moisten the ashes again and again with cow's milk, and dry them, and
grind them in a small mortar, and then mould the cupels. In the works in
which silver is separated from copper, they make cupels from two parts
of the ashes of the crucible of the cupellation furnace, for these ashes
are very dry, and from one part of bone-ash. Cupels which have been made
in these ways also need to be placed in the sun or in a furnace;
afterward, in whatever way they have been made, they must be kept a long
time in dry places, for the older they are, the dryer and better they
are.

[Illustration 231 (Cupel Moulds and Pestles): A--Little mould.
B--Inverted mould. C--Pestle. D--Its knob. E--Second pestle.]

Not only potters, but also the assayers themselves, make scorifiers and
triangular crucibles. They make them out of fatty clay, which is dry[5],
and neither hard nor soft. With this clay they mix the dust of old
broken crucibles, or of burnt and worn bricks; then they knead with a
pestle the clay thus mixed with dust, and then dry it. As to these
crucibles, the older they are, the dryer and better they are. The
moulds in which the cupels are moulded are of two kinds, that is, a
smaller size and a larger size. In the smaller ones are made the cupels
in which silver or gold is purged from the lead which has absorbed it;
in the larger ones are made cupels in which silver is separated from
copper and lead. Both moulds are made out of brass and have no bottom,
in order that the cupels can be taken out of them whole. The pestles
also are of two kinds, smaller and larger, each likewise of brass, and
from the lower end of them there projects a round knob, and this alone
is pressed into the mould and makes the hollow part of the cupel. The
part which is next to the knob corresponds to the upper part of the
mould.

So much for these matters. I will now speak of the preparation of the
ore for assaying. It is prepared by roasting, burning, crushing, and
washing. It is necessary to take a fixed weight of ore in order that one
may determine how great a portion of it these preparations consume. The
hard stone containing the metal is burned in order that, when its
hardness has been overcome, it can be crushed and washed; indeed, the
very hardest kind, before it is burned, is sprinkled with vinegar, in
order that it may more rapidly soften in the fire. The soft stone should
be broken with a hammer, crushed in a mortar and reduced to powder; then
it should be washed and then dried again. If earth is mixed with the
mineral, it is washed in a basin, and that which settles is assayed in
the fire after it is dried. All mining products which are washed must
again be dried. But ore which is rich in metal is neither burned nor
crushed nor washed, but is roasted, lest that method of preparation
should lose some of the metal. When the fires have been kindled, this
kind of ore is roasted in an enclosed pot, which is stopped up with
lute. A less valuable ore is even burned on a hearth, being placed upon
the charcoal; for we do not make a great expenditure upon metals, if
they are not worth it. However, I will go into fuller details as to all
these methods of preparing ore, both a little later, and in the
following Book.

For the present, I have decided to explain those things which mining
people usually call fluxes[6] because they are added to ores, not only
for assaying, but also for smelting. Great power is discovered in all
these fluxes, but we do not see the same effects produced in every case;
and some are of a very complicated nature. For when they have been mixed
with the ore and are melted in either the assay or the smelting furnace,
some of them, because they melt easily, to some extent melt the ore;
others, because they either make the ore very hot or penetrate into it,
greatly assist the fire in separating the impurities from the metals,
and they also mix the fused part with the lead, or they partly protect
from the fire the ore whose metal contents would be either consumed in
the fire, or carried up with the fumes and fly out of the furnace; some
fluxes absorb the metals. To the first order belongs lead, whether it be
reduced to little granules or resolved into ash by fire, or red-lead[7],
or ochre made from lead[8], or litharge, or hearth-lead, or galena;
also copper, the same either roasted or in leaves or filings[9]; also
the slags of gold, silver, copper, and lead; also soda[10], its slags,
saltpetre, burned alum, vitriol, _sal tostus_, and melted salt[11];
stones which easily melt in hot furnaces, the sand which is made from
them[12]; soft _tophus_[13], and a certain white schist[14]. But lead,
its ashes, red-lead, ochre, and litharge, are more efficacious for ores
which melt easily; hearth-lead for those which melt with difficulty; and
galena for those which melt with greater difficulty. To the second order
belong iron filings, their slag, _sal artificiosus_, argol, dried lees
of vinegar[15], and the lees of the _aqua_ which separates gold from
silver[16]; these lees and _sal artificiosus_ have the power of
penetrating into ore, the argol to a considerable degree, the lees of
vinegar to a greater degree, but most of all those of the _aqua_ which
separates gold from silver; filings and slags of iron, since they melt
more slowly, have the power of heating the ore. To the third order
belong pyrites, the cakes which are melted from them, soda, its slags,
salt, iron, iron scales, iron filings, iron slags, vitriol, the sand
which is resolved from stones which easily melt in the fire, and
_tophus_; but first of all are pyrites and the cakes which are melted
from it, for they absorb the metals of the ore and guard them from the
fire which consumes them. To the fourth order belong lead and copper,
and their relations. And so with regard to fluxes, it is manifest that
some are natural, others fall in the category of slags, and the rest are
purged from slag. When we assay ores, we can without great expense add
to them a small portion of any sort of flux, but when we smelt them we
cannot add a large portion without great expense. We must, therefore,
consider how great the cost is, to avoid incurring a greater expense on
smelting an ore than the profit we make out of the metals which it
yields.

The colour of the fumes which the ore emits after being placed on a hot
shovel or an iron plate, indicates what flux is needed in addition to
the lead, for the purpose of either assaying or smelting. If the fumes
have a purple tint, it is best of all, and the ore does not generally
require any flux whatever. If the fumes are blue, there should be added
cakes melted out of pyrites or other cupriferous rock; if yellow,
litharge and sulphur should be added; if red, glass-galls[17] and salt;
if green, then cakes melted from cupriferous stones, litharge, and
glass-galls; if the fumes are black, melted salt or iron slag, litharge
and white lime rock. If they are white, sulphur and iron which is eaten
with rust; if they are white with green patches, iron slag and sand
obtained from stones which easily melt; if the middle part of the fumes
are yellow and thick, but the outer parts green, the same sand and iron
slag. The colour of the fumes not only gives us information as to the
proper remedies which should be applied to each ore, but also more or
less indication as to the solidified juices which are mixed with it, and
which give forth such fumes. Generally, blue fumes signify that the ore
contains azure yellow, orpiment; red, realgar; green, chrysocolla;
black, black bitumen; white, tin[18]; white with green patches, the same
mixed with chrysocolla; the middle part yellow and other parts green
show that it contains sulphur. Earth, however, and other things dug up
which contain metals, sometimes emit similarly coloured fumes.

If the ore contains any _stibium_, then iron slag is added to it; if
pyrites, then are added cakes melted from a cupriferous stone and sand
made from stones which easily melt. If the ore contains iron, then
pyrites and sulphur are added; for just as iron slag is the flux for an
ore mixed with sulphur, so on the contrary, to a gold or silver ore
containing iron, from which they are not easily separated, is added
sulphur and sand made from stones which easily melt.

_Sal artificiosus_[19] suitable for use in assaying ore is made in many
ways. By the first method, equal portions of argol, lees of vinegar, and
urine, are all boiled down together till turned into salt. The second
method is from equal portions of the ashes which wool-dyers use, of
lime, of argol purified, and of melted salt; one _libra_ of each of
these ingredients is thrown into twenty _librae_ of urine; then all are
boiled down to one-third and strained, and afterward there is added to
what remains one _libra_ and four _unciae_ of unmelted salt, eight
pounds of lye being at the same time poured into the pots, with litharge
smeared around on the inside, and the whole is boiled till the salt
becomes thoroughly dry. The third method follows. Unmelted salt, and
iron which is eaten with rust, are put into a vessel, and after urine
has been poured in, it is covered with a lid and put in a warm place for
thirty days; then the iron is washed in the urine and taken out, and the
residue is boiled until it is turned into salt. In the fourth method by
which _sal artificiosus_ is prepared, the lye made from equal portions
of lime and the ashes which wool-dyers use, together with equal portions
of salt, soap, white argol, and saltpetre, are boiled until in the end
the mixture evaporates and becomes salt. This salt is mixed with the
concentrates from washing, to melt them.

Saltpetre is prepared in the following manner, in order that it may be
suitable for use in assaying ore. It is placed in a pot which is smeared
on the inside with litharge, and lye made of quicklime is repeatedly
poured over it, and it is heated until the fire consumes it. Wherefore
the saltpetre does not kindle with the fire, since it has absorbed the
lime which preserves it, and thus it is prepared[20].

The following compositions[21] are recommended to smelt all ores which
the heat of fire breaks up or melts only with difficulty. Of these, one
is made from stones of the third order, which easily melt when thrown
into hot furnaces. They are crushed into pure white powder, and with
half an _uncia_ of this powder there are mixed two _unciae_ of yellow
litharge, likewise crushed. This mixture is put into a scorifier large
enough to hold it, and placed under the muffle of a hot furnace; when
the charge flows like water, which occurs after half an hour, it is
taken out of the furnace and poured on to a stone, and when it has
hardened it has the appearance of glass, and this is likewise crushed.
This powder is sprinkled over any metalliferous ore which does not
easily melt when we are assaying it, and it causes the slag to exude.

Others, in place of litharge, substitute lead ash,[22] which is made in
the following way: sulphur is thrown into lead which has been melted in
a crucible, and it soon becomes covered with a sort of scum; when this
is removed, sulphur is again thrown in, and the skin which forms is
again taken off; this is frequently repeated, in fact until all the lead
is turned into powder. There is a powerful flux compound which is made
from one _uncia_ each of prepared saltpetre, melted salt, glass-gall,
and argol, and one-third of an _uncia_ of litharge and a _bes_ of glass
ground to powder; this flux, being added to an equal weight of ore,
liquefies it. A more powerful flux is made by placing together in a pot,
smeared on the inside with litharge, equal portions of white argol,
common salt, and prepared saltpetre, and these are heated until a white
powder is obtained from them, and this is mixed with as much litharge;
one part of this compound is mixed with two parts of the ore which is to
be assayed. A still more powerful flux than this is made out of ashes of
black lead, saltpetre, orpiment, _stibium_, and dried lees of the _aqua_
with which gold workers separate gold from silver. The ashes of lead[23]
are made from one pound of lead and one pound of sulphur; the lead is
flattened out into sheets by pounding with a hammer, and placed
alternately with sulphur in a crucible or pot, and they are heated
together until the fire consumes the sulphur and the lead turns to
ashes. One _libra_ of crushed saltpetre is mixed with one _libra_ of
orpiment similarly ground to powder, and the two are cooked in an iron
pan until they liquefy; they are then poured out, and after cooling are
again ground to powder. A _libra_ of _stibium_ and a _bes_ of the dried
lees (_of what?_) are placed alternately in a crucible and heated to the
point at which they form a button, which is similarly reduced to powder.
A _bes_ of this powder and one _libra_ of the ashes of lead, as well as
a _libra_ of powder made out of the saltpetre and orpiment, are mixed
together and a powder is made from them, one part of which added to two
parts of ore liquefies it and cleanses it of dross. But the most
powerful flux is one which has two _drachmae_ of sulphur and as much
glass-galls, and half an _uncia_ of each of the following,--_stibium_,
salt obtained from boiled urine, melted common salt, prepared saltpetre,
litharge, vitriol, argol, salt obtained from ashes of musk ivy, dried
lees of the _aqua_ by which gold-workers separate gold from silver, alum
reduced by fire to powder, and one _uncia_ of camphor[24] combined with
sulphur and ground into powder. A half or whole portion of this mixture,
as the necessity of the case requires, is mixed with one portion of the
ore and two portions of lead, and put in a scorifier; it is sprinkled
with powder of crushed Venetian glass, and when the mixture has been
heated for an hour and a half or two hours, a button will settle in the
bottom of the scorifier, and from it the lead is soon separated.

There is also a flux which separates sulphur, orpiment and realgar from
metalliferous ore. This flux is composed of equal portions of iron slag,
white _tophus_, and salt. After these juices have been secreted, the
ores themselves are melted, with argol added to them. There is one flux
which preserves _stibium_ from the fire, that the fire may not consume
it, and which preserves the metals from the _stibium_; and this is
composed of equal portions of sulphur, prepared saltpetre, melted salt,
and vitriol, heated together in lye until no odour emanates from the
sulphur, which occurs after a space of three or four hours.[25]

It is also worth while to substitute certain other mixtures. Take two
portions of ore properly prepared, one portion of iron filings, and
likewise one portion of salt, and mix; then put them into a scorifier
and place them in a muffle furnace; when they are reduced by the fire
and run together, a button will settle in the bottom of the scorifier.
Or else take equal portions of ore and of lead ochre, and mix with them
a small quantity of iron filings, and put them into a scorifier, then
scatter iron filings over the mixture. Or else take ore which has been
ground to powder and sprinkle it in a crucible, and then sprinkle over
it an equal quantity of salt that has been three or four times moistened
with urine and dried; then, again and again alternately, powdered ore
and salt; next, after the crucible has been covered with a lid and
sealed, it is placed upon burning charcoal. Or else take one portion of
ore, one portion of minute lead granules, half a portion of Venetian
glass, and the same quantity of glass-galls. Or else take one portion of
ore, one portion of lead granules, half a portion of salt, one-fourth of
a portion of argol, and the same quantity of lees of the _aqua_ which
separates gold from silver. Or else take equal portions of prepared ore
and a powder in which there are equal portions of very minute lead
granules, melted salt, _stibium_ and iron slag. Or else take equal
portions of gold ore, vitriol, argol, and of salt. So much for the
fluxes.

In the assay furnace, when it has been prepared in the way in which I
have described, is first placed a muffle. Then selected pieces of live
charcoals are laid on it, for, from pieces of inferior quality, a great
quantity of ash collects around the muffle and hinders the action of the
fire. Then the scorifiers are placed under the muffle with tongs, and
glowing coals are placed under the fore part of the muffle to warm the
scorifiers more quickly; and when the lead or ore is to be placed in the
scorifiers, they are taken out again with the tongs. When the scorifiers
glow in the heat, first of all the ash or small charcoals, if any have
fallen into them, should be blown away with an iron pipe two feet long
and a digit in diameter; this same thing must be done if ash or small
coal has fallen into the cupels. Next, put in a small ball of lead with
the tongs, and when this lead has begun to be turned into fumes and
consumed, add to it the prepared ore wrapped in paper. It is preferable
that the assayer should wrap it in paper, and in this way put it in the
scorifier, than that he should drop it in with a copper ladle; for when
the scorifiers are small, if he uses a ladle he frequently spills some
part of the ore. When the paper is burnt, he stirs the ore with a small
charcoal held in the tongs, so that the lead may absorb the metal which
is mixed in the ore; when this mixture has taken place, the slag partly
adheres by its circumference to the scorifier and makes a kind of black
ring, and partly floats on the lead in which is mixed the gold or
silver; then the slag must be removed from it.

The lead used must be entirely free from every trace of silver, as is
that which is known as _Villacense_.[26] But if this kind is not
obtainable, the lead must be assayed separately, to determine with
certainty that proportion of silver it contains, so that it may be
deducted from the calculation of the ore, and the result be exact; for
unless such lead be used, the assay will be false and misleading. The
lead balls are made with a pair of iron tongs, about one foot long; its
iron claws are so formed that when pressed together they are egg-shaped;
each claw contains a hollow cup, and when the claws are closed there
extends upward from the cup a passage, so there are two openings, one of
which leads to each hollow cup. And so when the molten lead is poured in
through the openings, it flows down into the hollow cup, and two balls
are formed by one pouring.

In this place I ought not to omit mention of another method of assaying
employed by some assayers. They first of all place prepared ore in the
scorifiers and heat it, and afterward they add the lead. Of this method
I cannot approve, for in this way the ore frequently becomes cemented,
and for this reason it does not stir easily afterward, and is very slow
in mixing with the lead.

[Illustration 240a (Tongs): A--Claws of the tongs. B--Iron, giving form
of an egg. C--Opening.]

If the whole space of the furnace covered by the muffle is not filled
with scorifiers, cupels are put in the empty space, in order that they
may become warmed in the meantime. Sometimes, however, it is filled with
scorifiers, when we are assaying many different ores, or many portions
of one ore at the same time. Although the cupels are usually dried in
one hour, yet smaller ones are done more quickly, and the larger ones
more slowly. Unless the cupels are heated before the metal mixed with
lead is placed in them, they frequently break, and the lead always
sputters and sometimes leaps out of them; if the cupel is broken or the
lead leaps out of it, it is necessary to assay another portion of ore;
but if the lead only sputters, then the cupels should be covered with
broad thin pieces of glowing charcoal, and when the lead strikes these,
it falls back again, and thus the mixture is slowly exhaled. Further, if
in the cupellation the lead which is in the mixture is not consumed, but
remains fixed and set, and is covered by a kind of skin, this is a sign
that it has not been heated by a sufficiently hot fire; put into the
mixture, therefore, a dry pine stick, or a twig of a similar tree, and
hold it in the hand in order that it can be drawn away when it has been
heated. Then take care that the heat is sufficient and equal; if the
heat has not passed all round the charge, as it should when everything
is done rightly, but causes it to have a lengthened shape, so that it
appears to have a tail, this is a sign that the heat is deficient where
the tail lies. Then in order that the cupel may be equally heated by the
fire, turn it around with a small iron hook, whose handle is likewise
made of iron and is a foot and a half long.

[Illustration 240b (Hook): Small iron hook.]

Next, if the mixture has not enough lead, add as much of it as is
required with the iron tongs, or with the brass ladle to which is
fastened a very long handle. In order that the charge may not be cooled,
warm the lead beforehand. But it is better at first to add as much lead
as is required to the ore which needs melting, rather than afterward
when the melting has been half finished, that the whole quantity may not
vanish in fumes, but part of it remain fast. When the heat of the fire
has nearly consumed the lead, then is the time when the gold and silver
gleam in their varied colours, and when all the lead has been consumed
the gold or silver settles in the cupel. Then as soon as possible remove
the cupel out of the furnace, and take the button out of it while it is
still warm, in order that it does not adhere to the ashes. This
generally happens if the button is already cold when it is taken out. If
the ashes do adhere to it, do not scrape it with a knife, lest some of
it be lost and the assay be erroneous, but squeeze it with the iron
tongs, so that the ashes drop off through the pressure. Finally, it is
of advantage to make two or three assays of the same ore at the same
time, in order that if by chance one is not successful, the second, or
in any event the third, may be certain.

[Illustration 241 (Shield for Muffle Furnace): A--Handle of tablet.
B--Its crack.]

While the assayer is assaying the ore, in order to prevent the great
heat of the fire from injuring his eyes, it will be useful for him
always to have ready a thin wooden tablet, two palms wide, with a handle
by which it may be held, and with a slit down the middle in order that
he may look through it as through a crack, since it is necessary for him
to look frequently within and carefully to consider everything.

Now the lead which has absorbed the silver from a metallic ore is
consumed in the cupel by the heat in the space of three quarters of an
hour. When the assays are completed the muffle is taken out of the
furnace, and the ashes removed with an iron shovel, not only from the
brick and iron furnaces, but also from the earthen one, so that the
furnace need not be removed from its foundation.

From ore placed in the triangular crucible a button is melted out, from
which metal is afterward made. First of all, glowing charcoal is put
into the iron hoop, then is put in the triangular crucible, which
contains the ore together with those things which can liquefy it and
purge it of its dross; then the fire is blown with the double bellows,
and the ore is heated until the button settles in the bottom of the
crucible. We have explained that there are two methods of assaying
ore,--one, by which the lead is mixed with ore in the scorifier and
afterward again separated from it in the cupel; the other, by which it
is first melted in the triangular earthen crucible and afterward mixed
with lead in the scorifier, and later separated from it in the cupel.
Now let us consider which is more suitable for each ore, or, if neither
is suitable, by what other method in one way or another we can assay it.

We justly begin with a gold ore, which we assay by both methods, for if
it is rich and seems not to be strongly resistant to fire, but to
liquefy easily, one _centumpondium_ of it (known to us as the lesser
weights),[27] together with one and a half, or two _unciae_ of lead of
the larger weights, are mixed together and placed in the scorifier, and
the two are heated in the fire until they are well mixed. But since such
an ore sometimes resists melting, add a little salt to it, either _sal
torrefactus_ or _sal artificiosus_, for this will subdue it, and prevent
the alloy from collecting much dross; stir it frequently with an iron
rod, in order that the lead may flow around the gold on every side, and
absorb it and cast out the waste. When this has been done, take out the
alloy and cleanse it of slag; then place it in the cupel and heat it
until it exhales all the lead, and a bead of gold settles in the bottom.

If the gold ore is seen not to be easily melted in the fire, roast it
and extinguish it with brine. Do this again and again, for the more
often you roast it and extinguish it, the more easily the ore can be
crushed fine, and the more quickly does it melt in the fire and give up
whatever dross it possesses. Mix one part of this ore, when it has been
roasted, crushed, and washed, with three parts of some powder compound
which melts ore, and six parts of lead. Put the charge into the
triangular crucible, place it in the iron hoop to which the double
bellows reaches, and heat first in a slow fire, and afterward gradually
in a fiercer fire, till it melts and flows like water. If the ore does
not melt, add to it a little more of these fluxes, mixed with an equal
portion of yellow litharge, and stir it with a hot iron rod until it all
melts. Then take the crucible out of the hoop, shake off the button when
it has cooled, and when it has been cleansed, melt first in the
scorifier and afterward in the cupel. Finally, rub the gold which has
settled in the bottom of the cupel, after it has been taken out and
cooled, on the touchstone, in order to find out what proportion of
silver it contains. Another method is to put a _centumpondium_ (of the
lesser weights) of gold ore into the triangular crucible, and add to it
a _drachma_ (of the larger weights) of glass-galls. If it resists
melting, add half a _drachma_ of roasted argol, and if even then it
resists, add the same quantity of roasted lees of vinegar, or lees of
the _aqua_ which separates gold from silver, and the button will settle
in the bottom of the crucible. Melt this button again in the scorifier
and a third time in the cupel.

We determine in the following way, before it is melted in the muffle
furnace, whether pyrites contains gold in it or not: if, after being
three times roasted and three times quenched in sharp vinegar, it has
not broken nor changed its colour, there is gold in it. The vinegar by
which it is quenched should be mixed with salt that is put in it, and
frequently stirred and dissolved for three days. Nor is pyrites devoid
of gold, when, after being roasted and then rubbed on the touchstone, it
colours the touchstone in the same way that it coloured it when rubbed
in its crude state. Nor is gold lacking in that, whose concentrates from
washing, when heated in the fire, easily melt, giving forth little smell
and remaining bright; such concentrates are heated in the fire in a
hollowed piece of charcoal covered over with another charcoal.

We also assay gold ore without fire, but more often its sand or the
concentrates which have been made by washing, or the dust gathered up by
some other means. A little of it is slightly moistened with water and
heated until it begins to exhale an odour, and then to one portion of
ore are placed two portions of quicksilver[28] in a wooden dish as deep
as a basin. They are mixed together with a little brine, and are then
ground with a wooden pestle for the space of two hours, until the
mixture becomes of the thickness of dough, and the quicksilver can no
longer be distinguished from the concentrates made by the washing, nor
the concentrates from the quicksilver. Warm, or at least tepid, water is
poured into the dish and the material is washed until the water runs out
clear. Afterward cold water is poured into the same dish, and soon the
quicksilver, which has absorbed all the gold, runs together into a
separate place away from the rest of the concentrates made by washing.
The quicksilver is afterward separated from the gold by means of a pot
covered with soft leather, or with canvas made of woven threads of
cotton; the amalgam is poured into the middle of the cloth or leather,
which sags about one hand's breadth; next, the leather is folded over
and tied with a waxed string, and the dish catches the quicksilver which
is squeezed through it. As for the gold which remains in the leather, it
is placed in a scorifier and purified by being placed near glowing
coals. Others do not wash away the dirt with warm water, but with strong
lye and vinegar, for they pour these liquids into the pot, and also
throw into it the quicksilver mixed with the concentrates made by
washing. Then they set the pot in a warm place, and after twenty-four
hours pour out the liquids with the dirt, and separate the quicksilver
from the gold in the manner which I have described. Then they pour urine
into a jar set in the ground, and in the jar place a pot with holes in
the bottom, and in the pot they place the gold; then the lid is put on
and cemented, and it is joined with the jar; they afterward heat it till
the pot glows red. After it has cooled, if there is copper in the gold
they melt it with lead in a cupel, that the copper may be separated from
it; but if there is silver in the gold they separate them by means of
the _aqua_ which has the power of parting these two metals. There are
some who, when they separate gold from quicksilver, do not pour the
amalgam into a leather, but put it into a gourd-shaped earthen vessel,
which they place in the furnace and heat gradually over burning
charcoal; next, with an iron plate, they cover the opening of the
operculum, which exudes vapour, and as soon as it has ceased to exude,
they smear it with lute and heat it for a short time; then they remove
the operculum from the pot, and wipe off the quicksilver which adheres
to it with a hare's foot, and preserve it for future use. By the latter
method, a greater quantity of quicksilver is lost, and by the former
method, a smaller quantity.

If an ore is rich in silver, as is _rudis_ silver[29], frequently silver
glance, or rarely ruby silver, gray silver, black silver, brown silver,
or yellow silver, as soon as it is cleansed and heated, a
_centumpondium_ (of the lesser weights) of it is placed in an _uncia_ of
molten lead in a cupel, and is heated until the lead exhales. But if the
ore is of poor or moderate quality, it must first be dried, then
crushed, and then to a _centumpondium_ (of the lesser weights) an
_uncia_ of lead is added, and it is heated in the scorifier until it
melts. If it is not soon melted by the fire, it should be sprinkled with
a little powder of the first order of fluxes, and if then it does not
melt, more is added little by little until it melts and exudes its slag;
that this result may be reached sooner, the powder which has been
sprinkled over it should be stirred in with an iron rod. When the
scorifier has been taken out of the assay furnace, the alloy should be
poured into a hole in a baked brick; and when it has cooled and been
cleansed of the slag, it should be placed in a cupel and heated until it
exhales all its lead; the weight of silver which remains in the cupel
indicates what proportion of silver is contained in the ore.

We assay copper ore without lead, for if it is melted with it, the
copper usually exhales and is lost. Therefore, a certain weight of such
an ore is first roasted in a hot fire for about six or eight hours;
next, when it has cooled, it is crushed and washed; then the
concentrates made by washing are again roasted, crushed, washed, dried,
and weighed. The portion which it has lost whilst it is being roasted
and washed is taken into account, and these concentrates by washing
represent the cake which will be melted out of the copper ore. Place
three _centumpondia_ (lesser weights) of this, mixed with three
_centumpondia_ (lesser weights) each of copper scales[30], saltpetre,
and Venetian glass, mixed, into the triangular crucible, and place it in
the iron hoop which is set on the hearth in front of the double bellows.
Cover the crucible with charcoal in such a way that nothing may fall
into the ore which is to be melted, and so that it may melt more
quickly. At first blow a gentle blast with the bellows in order that the
ore may be heated gradually in the fire; then blow strongly till it
melts, and the fire consumes that which has been added to it, and the
ore itself exudes whatever slag it possesses. Next, cool the crucible
which has been taken out, and when this is broken you will find the
copper; weigh this, in order to ascertain how great a portion of the ore
the fire has consumed. Some ore is only once roasted, crushed, and
washed; and of this kind of concentrates, three _centumpondia_ (lesser
weights) are taken with one _centumpondium_ each of common salt, argol
and glass-galls. Heat them in the triangular crucible, and when the
mixture has cooled a button of pure copper will be found, if the ore is
rich in this metal. If, however, it is less rich, a stony lump results,
with which the copper is intermixed; this lump is again roasted,
crushed, and, after adding stones which easily melt and saltpetre, it is
again melted in another crucible, and there settles in the bottom of the
crucible a button of pure copper. If you wish to know what proportion of
silver is in this copper button, melt it in a cupel after adding lead.
With regard to this test I will speak later.

Those who wish to know quickly what portion of silver the copper ore
contains, roast the ore, crush and wash it, then mix a little yellow
litharge with one _centumpondium_ (lesser weights) of the concentrates,
and put the mixture into a scorifier, which they place under the muffle
in a hot furnace for the space of half an hour. When the slag exudes, by
reason of the melting force which is in the litharge, they take the
scorifier out; when it has cooled, they cleanse it of slag and again
crush it, and with one _centumpondium_ of it they mix one and a half
_unciae_ of lead granules. They then put it into another scorifier,
which they place under the muffle in a hot furnace, adding to the
mixture a little of the powder of some one of the fluxes which cause ore
to melt; when it has melted they take it out, and after it has cooled,
cleanse it of slag; lastly, they heat it in the cupel till it has
exhaled all of the lead, and only silver remains.

Lead ore may be assayed by this method: crush half an _uncia_ of pure
lead-stone and the same quantity of the _chrysocolla_ which they call
borax, mix them together, place them in a crucible, and put a glowing
coal in the middle of it. As soon as the borax crackles and the
lead-stone melts, which soon occurs, remove the coal from the crucible,
and the lead will settle to the bottom of it; weigh it out, and take
account of that portion of it which the fire has consumed. If you also
wish to know what portion of silver is contained in the lead, melt the
lead in the cupel until all of it exhales.

Another way is to roast the lead ore, of whatsoever quality it be, wash
it, and put into the crucible one _centumpondium_ of the concentrates,
together with three _centumpondia_ of the powdered compound which melts
ore, mixed together, and place it in the iron hoop that it may melt;
when it has cooled, cleanse it of its slag, and complete the test as I
have already said. Another way is to take two _unciae_ of prepared ore,
five _drachmae_ of roasted copper, one _uncia_ of glass, or glass-galls
reduced to powder, a _semi-uncia_ of salt, and mix them. Put the mixture
into the triangular crucible, and heat it over a gentle fire to prevent
it from breaking; when the mixture has melted, blow the fire vigorously
with the bellows; then take the crucible off the live coals and let it
cool in the open air; do not pour water on it, lest the lead button
being acted upon by the excessive cold should become mixed with the
slag, and the assay in this way be erroneous. When the crucible has
cooled, you will find in the bottom of it the lead button. Another way
is to take two _unciae_ of ore, a _semi-uncia_ of litharge, two
_drachmae_ of Venetian glass and a _semi-uncia_ of saltpetre. If there
is difficulty in melting the ore, add to it iron filings, which, since
they increase the heat, easily separate the waste from lead and other
metals. By the last way, lead ore properly prepared is placed in the
crucible, and there is added to it only the sand made from stones which
easily melt, or iron filings, and then the assay is completed as
formerly.

You can assay tin ore by the following method. First roast it, then
crush, and afterward wash it; the concentrates are again roasted,
crushed, and washed. Mix one and a half _centumpondia_ of this with one
_centumpondium_ of the _chrysocolla_ which they call borax; from the
mixture, when it has been moistened with water, make a lump. Afterwards,
perforate a large round piece of charcoal, making this opening a palm
deep, three digits wide on the upper side and narrower on the lower
side; when the charcoal is put in its place the latter should be on the
bottom and the former uppermost. Let it be placed in a crucible, and let
glowing coal be put round it on all sides; when the perforated piece of
coal begins to burn, the lump is placed in the upper part of the
opening, and it is covered with a wide piece of glowing coal, and after
many pieces of coal have been put round it, a hot fire is blown up with
the bellows, until all the tin has run out of the lower opening of the
charcoal into the crucible. Another way is to take a large piece of
charcoal, hollow it out, and smear it with lute, that the ore may not
leap out when white hot. Next, make a small hole through the middle of
it, then fill up the large opening with small charcoal, and put the ore
upon this; put fire in the small hole and blow the fire with the nozzle
of a hand bellows; place the piece of charcoal in a small crucible,
smeared with lute, in which, when the melting is finished, you will find
a button of tin.

In assaying bismuth ore, place pieces of ore in the scorifier, and put
it under the muffle in a hot furnace; as soon as they are heated, they
drip with bismuth, which runs together into a button.

Quicksilver ore is usually tested by mixing one part of broken ore with
three-parts of charcoal dust and a handful of salt. Put the mixture into
a crucible or a pot or a jar, cover it with a lid, seal it with lute,
place it on glowing charcoal, and as soon as a burnt cinnabar colour
shows in it, take out the vessel; for if you continue the heat too long
the mixture exhales the quicksilver with the fumes. The quicksilver
itself, when it has become cool, is found in the bottom of the crucible
or other vessel. Another way is to place broken ore in a gourd-shaped
earthen vessel, put it in the assay furnace, and cover with an operculum
which has a long spout; under the spout, put an ampulla to receive the
quicksilver which distills. Cold water should be poured into the
ampulla, so that the quicksilver which has been heated by the fire may
be continuously cooled and gathered together, for the quicksilver is
borne over by the force of the fire, and flows down through the spout of
the operculum into the ampulla. We also assay quicksilver ore in the
very same way in which we smelt it. This I will explain in its proper
place.

Lastly, we assay iron ore in the forge of a blacksmith. Such ore is
burned, crushed, washed, and dried; a magnet is laid over the
concentrates, and the particles of iron are attracted to it; these are
wiped off with a brush, and are caught in a crucible, the magnet being
continually passed over the concentrates and the particles wiped off, so
long as there remain any particles which the magnet can attract to it.
These particles are heated in the crucible with saltpetre until they
melt, and an iron button is melted out of them. If the magnet easily and
quickly attracts the particles to it, we infer that the ore is rich in
iron; if slowly, that it is poor; if it appears actually to repel the
ore, then it contains little or no iron. This is enough for the assaying
of ores.

I will now speak of the assaying of the metal alloys. This is done both
by coiners and merchants who buy and sell metal, and by miners, but most
of all by the owners and mine masters, and by the owners and masters of
the works in which the metals are smelted, or in which one metal is
parted from another.

First I will describe the way assays are usually made to ascertain what
portion of precious metal is contained in base metal. Gold and silver
are now reckoned as precious metals and all the others as base metals.
Once upon a time the base metals were burned up, in order that the
precious metals should be left pure; the Ancients even discovered by
such burning what portion of gold was contained in silver, and in this
way all the silver was consumed, which was no small loss. However, the
famous mathematician, Archimedes[31], to gratify King Hiero, invented a
method of testing the silver, which was not very rapid, and was more
accurate for testing a large mass than a small one. This I will explain
in my commentaries. The alchemists have shown us a way of separating
silver from gold by which neither of them is lost[32].

Gold which contains silver,[33] or silver which contains gold, is first
rubbed on the touchstone. Then a needle in which there is a similar
amount of gold or silver is rubbed on the same touchstone, and from the
lines which are produced in this way, is perceived what portion of
silver there is in the gold, or what portion of gold there is in the
silver. Next there is added to the silver which is in the gold, enough
silver to make it three times as much as the gold. Then lead is placed
in a cupel and melted; a little later, a small amount of copper is put
in it, in fact, half an _uncia_ of it, or half an _uncia_ and a
_sicilicus_ (of the smaller weights) if the gold or silver does not
contain any copper. The cupel, when the lead and copper are wanting,
attracts the particles of gold and silver, and absorbs them. Finally,
one-third of a _libra_ of the gold, and one _libra_[34] of the silver
must be placed together in the same cupel and melted; for if the gold
and silver were first placed in the cupel and melted, as I have already
said, it absorbs particles of them, and the gold, when separated from
the silver, will not be found pure. These metals are heated until the
lead and the copper are consumed, and again, the same weight of each is
melted in the same manner in another cupel. The buttons are pounded with
a hammer and flattened out, and each little leaf is shaped in the form
of a tube, and each is put into a small glass ampulla. Over these there
is poured one _uncia_ and one _drachma_ (of the large weight) of the
third quality _aqua valens_, which I will describe in the Tenth Book.
This is heated over a slow fire, and small bubbles, resembling pearls in
shape, will be seen to adhere to the tubes. The redder the _aqua_
appears, the better it is judged to be; when the redness has vanished,
small white bubbles are seen to be resting on the tubes, resembling
pearls not only in shape, but also in colour. After a short time the
_aqua_ is poured off and other is poured on; when this has again raised
six or eight small white bubbles, it is poured off and the tubes are
taken out and washed four or five times with spring water; or if they
are heated with the same water, when it is boiling, they will shine more
brilliantly. Then they are placed in a saucer, which is held in the hand
and gradually dried by the gentle heat of the fire; afterward the saucer
is placed over glowing charcoal and covered with a charcoal, and a
moderate blast is blown upon it with the mouth and then a blue flame
will be emitted. In the end the tubes are weighed, and if their weights
prove equal, he who has undertaken this work has not laboured in vain.
Lastly, both are placed in another balance-pan and weighed; of each tube
four grains must not be counted, on account of the silver which remains
in the gold and cannot be separated from it. From the weight of the
tubes we learn the weight both of the gold and of the silver which is in
the button. If some assayer has omitted to add so much silver to the
gold as to make it three times the quantity, but only double, or two and
a half times as much, he will require the stronger quality of _aqua_
which separates gold from silver, such as the fourth quality. Whether
the _aqua_ which he employs for gold and silver is suitable for the
purpose, or whether it is more or less strong than is right, is
recognised by its effect. That of medium strength raises the little
bubbles on the tubes and is found to colour the ampulla and the
operculum a strong red; the weaker one is found to colour them a light
red, and the stronger one to break the tubes. To pure silver in which
there is some portion of gold, nothing should be added when they are
being heated in the cupel prior to their being parted, except a _bes_ of
lead and one-fourth or one-third its amount of copper of the lesser
weights. If the silver contains in itself a certain amount of copper,
let it be weighed, both after it has been melted with the lead, and
after the gold has been parted from it; by the former we learn how much
copper is in it, by the latter how much gold. Base metals are burnt up
even to-day for the purpose of assay, because to lose so little of the
metal is small loss, but from a large mass of base metal, the precious
metal is always extracted, as I will explain in Books X. and XI.

We assay an alloy of copper and silver in the following way. From a few
cakes of copper the assayer cuts out portions, small samples from small
cakes, medium samples from medium cakes, and large samples from large
cakes; the small ones are equal in size to half a hazel nut, the large
ones do not exceed the size of half a chestnut, and those of medium size
come between the two. He cuts out the samples from the middle of the
bottom of each cake. He places the samples in a new, clean, triangular
crucible and fixes to them pieces of paper upon which are written the
weight of the cakes of copper, of whatever size they may be; for
example, he writes, "These samples have been cut from copper which
weighs twenty _centumpondia_." When he wishes to know how much silver
one _centumpondium_ of copper of this kind has in it, first of all he
throws glowing coals into the iron hoop, then adds charcoal to it. When
the fire has become hot, the paper is taken out of the crucible and put
aside, he then sets that crucible on the fire and gradually heats it for
a quarter of an hour until it becomes red hot. Then he stimulates the
fire by blowing with a blast from the double bellows for half an hour,
because copper which is devoid of lead requires this time to become hot
and to melt; copper not devoid of lead melts quicker. When he has blown
the bellows for about the space of time stated, he removes the glowing
charcoal with the tongs, and stirs the copper with a splinter of wood,
which he grasps with the tongs. If it does not stir easily, it is a sign
that the copper is not wholly liquefied; if he finds this is the case,
he again places a large piece of charcoal in the crucible, and replaces
the glowing charcoal which had been removed, and again blows the bellows
for a short time. When all the copper has melted he stops using the
bellows, for if he were to continue to use them, the fire would consume
part of the copper, and then that which remained would be richer than
the cake from which it had been cut; this is no small mistake.
Therefore, as soon as the copper has become sufficiently liquefied, he
pours it out into a little iron mould, which may be large or small,
according as more or less copper is melted in the crucible for the
purpose of the assay. The mould has a handle, likewise made of iron, by
which it is held when the copper is poured in, after which, he plunges
it into a tub of water placed near at hand, that the copper may be
cooled. Then he again dries the copper by the fire, and cuts off its
point with an iron wedge; the portion nearest the point he hammers on an
anvil and makes into a leaf, which he cuts into pieces.

[Illustration 250 (Copper Mould for Assaying): A--Iron mould. B--Its
handle.]

Others stir the molten copper with a stick of linden tree charcoal, and
then pour it over a bundle of new clean birch twigs, beneath which is
placed a wooden tub of sufficient size and full of water, and in this
manner the copper is broken up into little granules as small as hemp
seeds. Others employ straw in place of twigs. Others place a broad stone
in a tub and pour in enough water to cover the stone, then they run out
the molten copper from the crucible on to the stone, from which the
minute granules roll off; others pour the molten copper into water and
stir it until it is resolved into granules. The fire does not easily
melt the copper in the cupel unless it has been poured and a thin leaf
made of it, or unless it has been resolved into granules or made into
filings; and if it does not melt, all the labour has been undertaken in
vain. In order that they may be accurately weighed out, silver and lead
are resolved into granules in the same manner as copper. But to return
to the assay of copper. When the copper has been prepared by these
methods, if it is free of lead and iron, and rich in silver, to each
_centumpondium_ (lesser weights) add one and a half _unciae_ of lead
(larger weights). If, however, the copper contains some lead, add one
_uncia_ of lead; if it contains iron, add two _unciae_. First put the
lead into a cupel, and after it begins to smoke, add the copper; the
fire generally consumes the copper, together with the lead, in about one
hour and a quarter. When this is done, the silver will be found in the
bottom of the cupel. The fire consumes both of those metals more quickly
if they are heated in that furnace which draws in air. It is better to
cover the upper half of it with a lid, and not only to put on the muffle
door, but also to close the window of the muffle door with a piece of
charcoal, or with a piece of brick. If the copper be such that the
silver can only be separated from it with difficulty, then before it is
tested with fire in the cupel, lead should first be put into the
scorifier, and then the copper should be added with a moderate quantity
of melted salt, both that the lead may absorb the copper and that the
copper may be cleansed of the dross which abounds in it.

Tin which contains silver should not at the beginning of the assay be
placed in a cupel, lest the silver, as often happens, be consumed and
converted into fumes, together with the tin. As soon as the lead[35] has
begun to fume in the scorifier, then add that[36] to it. In this way the
lead will take the silver and the tin will boil and turn into ashes,
which may be removed with a wooden splinter. The same thing occurs if
any alloy is melted in which there is tin. When the lead has absorbed
the silver which was in the tin, then, and not till then, it is heated
in the cupel. First place the lead with which the silver is mixed, in an
iron pan, and stand it on a hot furnace and let it melt; afterward pour
this lead into a small iron mould, and then beat it out with a hammer on
an anvil and make it into leaves in the same way as the copper. Lastly,
place it in the cupel, which assay can be carried out in the space of
half an hour. A great heat is harmful to it, for which reason there is
no necessity either to cover the half of the furnace with a lid or to
close up its mouth.

The minted metal alloys, which are known as money, are assayed in the
following way. The smaller silver coins which have been picked out from
the bottom and top and sides of a heap are first carefully cleansed;
then, after they have been melted in the triangular crucible, they are
either resolved into granules, or made into thin leaves. As for the
large coins which weigh a _drachma_, a _sicilicus_, half an _uncia_, or
an _uncia_, beat them into leaves. Then take a _bes_ of the granules, or
an equal weight of the leaves, and likewise take another _bes_ in the
same way. Wrap each sample separately in paper, and afterwards place two
small pieces of lead in two cupels which have first been heated. The
more precious the money is, the smaller portion of lead do we require
for the assay, the more base, the larger is the portion required; for if
a _bes_ of silver is said to contain only half an _uncia_ or one _uncia_
of copper, we add to the _bes_ of granules half an _uncia_ of lead. If
it is composed of equal parts of silver and copper, we add an _uncia_ of
lead, but if in a _bes_ of copper there is only half an _uncia_ or one
_uncia_ of silver, we add an _uncia_ and a half of lead. As soon as the
lead has begun to fume, put into each cupel one of the papers in which
is wrapped the sample of silver alloyed with copper, and close the mouth
of the muffle with charcoal. Heat them with a gentle fire until all the
lead and copper are consumed, for a hot fire by its heat forces the
silver, combined with a certain portion of lead, into the cupel, in
which way the assay is rendered erroneous. Then take the beads out of
the cupel and clean them of dross. If neither depresses the pan of the
balance in which it is placed, but their weight is equal, the assay has
been free from error; but if one bead depresses its pan, then there is
an error, for which reason the assay must be repeated. If the _bes_ of
coin contains but seven _unciae_ of pure silver it is because the King,
or Prince, or the State who coins the money, has taken one _uncia_,
which he keeps partly for profit and partly for the expense of coining,
he having added copper to the silver. Of all these matters I have
written extensively in my book _De Precio Metallorum et Monetis_.

We assay gold coins in various ways. If there is copper mixed with the
gold, we melt them by fire in the same way as silver coins; if there is
silver mixed with the gold, they are separated by the strongest _aqua
valens_; if there is copper and silver mixed with the gold, then in the
first place, after the addition of lead, they are heated in the cupel
until the fire consumes the copper and the lead, and afterward the gold
is parted from the silver.

It remains to speak of the touchstone[37] with which gold and silver are
tested, and which was also used by the Ancients. For although the assay
made by fire is more certain, still, since we often have no furnace, nor
muffle, nor crucibles, or some delay must be occasioned in using them,
we can always rub gold or silver on the touchstone, which we can have in
readiness. Further, when gold coins are assayed in the fire, of what use
are they afterward? A touchstone must be selected which is thoroughly
black and free of sulphur, for the blacker it is and the more devoid of
sulphur, the better it generally is; I have written elsewhere of its
nature[38]. First the gold is rubbed on the touchstone, whether it
contains silver or whether it is obtained from the mines or from the
smelting; silver also is rubbed in the same way. Then one of the
needles, that we judge by its colour to be of similar composition, is
rubbed on the touchstone; if this proves too pale, another needle which
has a stronger colour is rubbed on the touchstone; and if this proves
too deep in colour, a third which has a little paler colour is used. For
this will show us how great a proportion of silver or copper, or silver
and copper together, is in the gold, or else how great a proportion of
copper is in silver.

These needles are of four kinds.[39] The first kind are made of gold and
silver, the second of gold and copper, the third of gold, silver, and
copper, and the fourth of silver and copper. The first three kinds of
needles are used principally for testing gold, and the fourth for
silver. Needles of this kind are prepared in the following ways. The
lesser weights correspond proportionately to the larger weights, and
both of them are used, not only by mining people, but by coiners also.
The needles are made in accordance with the lesser weights, and each set
corresponds to a _bes_, which, in our own vocabulary, is called a
_mark_. The _bes_, which is employed by those who coin gold, is divided
into twenty-four double _sextulae_, which are now called after the
Greek name _ceratia_; and each double _sextula_ is divided into four
_semi-sextulae_, which are called _granas_; and each _semi-sextula_ is
divided into three units of four _siliquae_ each, of which each unit is
called a _grenlin_. If we made the needles to be each four _siliquae_,
there would be two hundred and eighty-eight in a _bes_, but if each were
made to be a _semi-sextula_ or a double _scripula_, then there would be
ninety-six in a _bes_. By these two methods too many needles would be
made, and the majority of them, by reason of the small difference in the
proportion of the gold, would indicate nothing, therefore it is
advisable to make them each of a double _sextula_; in this way
twenty-four needles are made, of which the first is made of twenty-three
_duellae_ of silver and one of gold. Fannius is our authority that the
Ancients called the double _sextula_ a _duella_. When a bar of silver is
rubbed on the touchstone and colours it just as this needle does, it
contains one _duella_ of gold. In this manner we determine by the other
needles what proportion of gold there is, or when the gold exceeds the
silver in weight, what proportion of silver.

[Illustration 255 (Touch-needles)]

The needles are made[40]:--

  The 1st needle of 23 _duellae_ of silver and 1 _duella_ of gold.
   "  2nd    "      22    "          "         2 _duellae_ of gold.
   "  3rd    "      21    "          "         3      "        "
   "  4th    "      20    "          "         4      "        "
   "  5th    "      19    "          "         5      "        "
   "  6th    "      18    "          "         6      "        "
   "  7th    "      17    "          "         7      "        "
   "  8th    "      16    "          "         8      "        "
   "  9th    "      15    "          "         9      "        "
   "  10th   "      14    "          "        10      "        "
   "  11th   "      13    "          "        11      "        "
   "  12th   "      12    "          "        12      "        "
   "  13th   "      11    "          "        13      "        "
   "  14th   "      10    "          "        14      "        "
   "  15th   "       9    "          "        15      "        "
   "  16th   "       8    "          "        16      "        "
   "  17th   "       7    "          "        17      "        "
   "  18th   "       6    "          "        18      "        "
   "  19th   "       5    "          "        19      "        "
   "  20th   "       4    "          "        20      "        "
   "  21st   "       3    "          "        21      "        "
   "  22nd   "       2    "          "        22      "        "
   "  23rd   "       1    "          "        23      "        "
   "  24th   "       pure gold

By the first eleven needles, when they are rubbed on the touchstone, we
test what proportion of gold a bar of silver contains, and with the
remaining thirteen we test what proportion of silver is in a bar of
gold; and also what proportion of either may be in money.

Since some gold coins are composed of gold and copper, thirteen needles
of another kind are made as follows:--

  The 1st of 12 _duellae_ of gold and 12 _duellae_ of copper.
   "  2nd  " 13    "          "       11    "           "
   "  3rd  " 14    "          "       10    "           "
   "  4th  " 15    "          "        9    "           "
   "  5th  " 16    "          "        8    "           "
   "  6th  " 17    "          "        7    "           "
   "  7th  " 18    "          "        6    "           "
   "  8th  " 19    "          "        5    "           "
   "  9th  " 20    "          "        4    "           "
   " 10th  " 21    "          "        3    "           "
   " 11th  " 22    "          "        2    "           "
   " 12th  " 23    "          "        1    "           "
   " 13th  " pure gold.

These needles are not much used, because gold coins of that kind are
somewhat rare; the ones chiefly used are those in which there is much
copper. Needles of the third kind, which are composed of gold, silver,
and copper, are more largely used, because such gold coins are common.
But since with the gold there are mixed equal or unequal portions of
silver and copper, two sorts of needles are made. If the proportion of
silver and copper is equal, the needles are as follows:--

                Gold.               Silver.                   Copper.
  The 1st of 12 _duellae_   6 _duellae_ 0 _sextula_   6 _duellae_ 0 _sextula_
   "  2nd  " 13   "         5   "       1    "        5    "      1    "
   "  3rd  " 14   "         5   "                     5    "
   "  4th  " 15   "         4   "       1    "        4    "      1    "
   "  5th  " 16   "         4   "                     4    "
   "  6th  " 17   "         3   "       1    "        3    "      1    "
   "  7th  " 18   "         3   "                     3    "
   "  8th  " 19   "         2   "       1    "        2    "      1    "
   "  9th  " 20   "         2   "                     2    "
   " 10th  " 21   "         1   "       1    "        1    "      1    "
   " 11th  " 22   "         1   "                     1    "
   " 12th  " 23   "         1   "
   " 13th  " pure gold.

Some make twenty-five needles, in order to be able to detect the two
_scripula_ of silver or copper which are in a _bes_ of gold. Of these
needles, the first is composed of twelve _duellae_ of gold and six of
silver, and the same number of copper. The second, of twelve _duellae_
and one _sextula_ of gold and five _duellae_ and one and a half
_sextulae_ of silver, and the same number of _duellae_ and one and a
half _sextulae_ of copper. The remaining needles are made in the same
proportion.

Pliny is our authority that the Romans could tell to within one
_scripulum_ how much gold was in any given alloy, and how much silver or
copper.

Needles may be made in either of two ways, namely, in the ways of which
I have spoken, and in the ways of which I am now about to speak. If
unequal portions of silver and copper have been mixed with the gold,
thirty-seven needles are made in the following way:--

              Gold.              Silver.                   Copper.
            _Duellae_.    _Duellae_                 _Duellae_
                                _Sextulae_                _Sextulae_
                                      _Siliquae_.               _Siliquae_.
  The 1st of   12           9     0         0         3     0         0
   "  2nd "    12           8     0         0         4     0         0
   "  3rd "    12           7                         5

   "  4th "    13           8     1/2                 2     1/2
   "  5th "    13           7     1/2       4         3     1         8
   "  6th "    13           6     1/2       8         4     1         4

   "  7th "    14           7     1                   2     1
   "  8th "    14           6     1         8         3     1/2       4
   "  9th "    14           5     1-1/2     4         4               8

   " 10th "    15           6     1-1/2               2     1/2
   " 11th "    15           6                         3
   " 12th "    15           5     1/2                 3     1-1/2

   " 13th "    16           6                         2
   " 14th "    16           5     1/2       4         2     1         8
   " 15th "    16           4     1         8         3     1/2       4

   " 16th "    17           5     1/2       0         1     1-1/2
   " 17th "    17           4     1         8         2     1/2       4
   " 18th "    17           4     4                   2     1-1/2     8

   " 19th "    18           4     1                   1     1
   " 20th "    18           4     0                   2
   " 21st "    18           3     1                   2     1

   " 22nd "    19           2     1-1/2               1     1/2
   " 23rd "    19           3     1/2       4         1     1         8
   " 24th "    19           2     1-1/2     8         2               4

   " 25th "    20           3                         1
   " 26th "    20           2     1         8         1      1/2      4
   " 27th "    20           2     1/2       4         1      1        8

   " 28th "    21           2     1/2                 1-1/2
   " 29th "    21           2                         1
   " 30th "    21           1     1-1/2               1      1/2

   " 31st "    22           1     1                   1
   " 32nd "    22           1     1/2       4         0      1        8
   " 33rd "    22           1               8                1-1/2    4

   " 34th "    23                 1-1/2                      1/2
   " 35th "    23                 1         8                1/2      4
   " 36th "    23                 1         4                1/2      8
   " 37th "    pure gold.

Since it is rarely found that gold, which has been coined, does not
amount to at least fifteen _duellae_ gold in a _bes_, some make only
twenty-eight needles, and some make them different from those already
described, inasmuch as the alloy of gold with silver and copper is
sometimes differently proportioned.

These needles are made:--

              Gold.              Silver.                   Copper.
            _Duellae_.    _Duellae_                 _Duellae_
                                _Sextulae_                _Sextulae_
                                      _Siliquae_.               _Siliquae_.
  The 1st of   15           6     1         8         2     1/2       4
   "  2nd "    15           6               4         2     1-1/2     8
   "  3rd "    15           5     1/2                 3     1-1/2

   "  4th "    16           6     1/2                 1     1-1/2
   "  5th "    16           5     1         8         2     1/2       4
   "  6th "    16           4     1-1/2     8         3               4

   "  7th "    17           5     1         4         1     1/2       8
   "  8th "    17           5               4         1     1-1/2     8
   "  9th "    17           4     1         4         2     1/2       8

   " 10th "    18           4     1                   1     1
   " 11th "    18           4                         2
   " 12th "    18           3     1                   2     1

   " 13th "    19           3     1-1/2     4         1               8
   " 14th "    19           3     1/2       4         1     1         8
   " 15th "    19           2     1-1/2     4         2               8

   " 16th "    20           3                         1
   " 17th "    20           2                         1     1
   " 18th "    20           2                         2

   " 19th "    21           2     1/2       4               1         8
   " 20th "    21           1     1-1/2     4         1               8
   " 21st "    21           1     1         8         1     1/2       4

   " 22nd "    22           1     1         8               1/2       4
   " 23rd "    22           1     1                         1
   " 24th "    22           1     1/2       4               1         8

   " 25th "    23                 1-1/2     4                         8
   " 26th "    23                 1-1/2                     1/2
   " 27th "    23                 1         8               1/2       4
   " 28th "   pure gold

Next follows the fourth kind of needles, by which we test silver coins
which contain copper, or copper coins which contain silver. The _bes_ by
which we weigh the silver is divided in two different ways. It is either
divided twelve times, into units of five _drachmae_ and one _scripulum_
each, which the ordinary people call _nummi_[41]; each of these units
we again divide into twenty-four units of four _siliquae_ each, which
the same ordinary people call a _grenlin_; or else the _bes_ is divided
into sixteen _semunciae_ which are called _loths_, each of which is
again divided into eighteen units of four _siliquae_ each, which they
call _grenlin_. Or else the _bes_ is divided into sixteen _semunciae_,
of which each is divided into four _drachmae_, and each _drachma_ into
four _pfennige_. Needles are made in accordance with each method of
dividing the _bes_. According to the first method, to the number of
twenty-four half _nummi_; according to the second method, to the number
of thirty-one half _semunciae_, that is to say a _sicilicus_; for if the
needles were made to the number of the smaller weights, the number of
needles would again be too large, and not a few of them, by reason of
the small difference in proportion of silver or copper, would have no
significance. We test both bars and coined money composed of silver and
copper by both scales. The one is as follows: the first needle is made
of twenty-three parts of copper and one part silver; whereby, whatsoever
bar or coin, when rubbed on the touchstone, colours it just as this
needle does, in that bar or money there is one twenty-fourth part of
silver, and so also, in accordance with the proportion of silver, is
known the remaining proportion of the copper.

  The 1st needle is made of 23 parts of copper and 1 of silver.
   " 2nd    "        "      22   "        "        2      "
   " 3rd    "        "      21   "        "        3      "
   " 4th    "        "      20   "        "        4      "
   " 5th    "        "      19   "        "        5      "
   " 6th    "        "      18   "        "        6      "
   " 7th    "        "      17   "        "        7      "
   " 8th    "        "      16   "        "        8      "
   " 9th    "        "      15   "        "        9      "
   " 10th   "        "      14   "        "       10      "
   " 11th   "        "      13   "        "       11      "
   " 12th   "        "      12   "        "       12      "
   " 13th   "        "      11   "        "       13      "
   " 14th   "        "      10   "        "       14      "
   " 15th   "        "       9   "        "       15      "
   " 16th   "        "       8   "        "       16      "
   " 17th   "        "       7   "        "       17      "
   " 18th   "        "       6   "        "       18      "
   " 19th   "        "       5   "        "       19      "
   " 20th   "        "       4   "        "       20      "
   " 21st   "        "       3   "        "       21      "
   " 22nd   "        "       2   "        "       22      "
   " 23rd   "        "       1   "        "       23      "
   " 24th of pure silver.

The other method of making needles is as follows:--

                        Copper.                  Silver.
                 _Semunciae_ _Sicilici._     _Semunciae_ _Sicilici._

  The 1st is of      15                           1
   "  2nd "   "      14           1               1           1
   "  3rd "   "      14                           2

   "  4th "   "      13           1               2           1
   "  5th "   "      13                           3
   "  6th "   "      12           1               3           1

   "  7th "   "      12                           4
   "  8th "   "      11           1               4           1
   "  9th "   "      11                           5

   " 10th "   "      10           1               5           1
   " 11th "   "      10                           6
   " 12th "   "       9           1               6           1

   " 13th "   "       9                           7
   " 14th "   "       8           1               7           1
   " 15th "   "       8                           8

   " 16th "   "       7           1               8           1
   " 17th "   "       7                           9
   " 18th "   "       6           1               9           1

   " 19th "   "       6                          10
   " 20th "   "       5           1              10           1
   " 21st "   "       5                          11

   " 22nd "   "       4           1              11           1
   " 23rd "   "       4                          12
   " 24th "   "       3           1              12           1

   " 25th "   "       3                          13
   " 26th "   "       2           1              13           1
   " 27th "   "       2                          14

   " 28th "   "       1           1              14           1
   " 29th "   "       1                          15
   " 30th "   "                   1              15           1
   " 31st of pure silver.

So much for this. Perhaps I have used more words than those most highly
skilled in the art may require, but it is necessary for the
understanding of these matters.

I will now speak of the weights, of which I have frequently made
mention. Among mining people these are of two kinds, that is, the
greater weights and the lesser weights. The _centumpondium_ is the first
and largest weight, and of course consists of one hundred _librae_, and
for that reason is called a hundred weight.

The various weights are:--

  1st = 100 _librae_ = _centumpondium_.
  2nd =  50     "
  3rd =  25     "
  4th =  16     "
  5th =   8     "
  6th =   4     "
  7th =   2     "
  8th =   1 _libra_.

This _libra_ consists of sixteen _unciae_, and the half part of the
_libra_ is the _selibra_, which our people call a _mark_, and consists
of eight _unciae_, or, as they divide it, of sixteen _semunciae_:--

   9th = 8 _unciae_.
  10th = 8 _semunciae_.
  11th = 4     "
  12th = 2     "
  13th = 1 _semuncia_.
  14th = 1 _sicilicus_.
  15th = 1 _drachma_.
  16th = 1 _dimidi-drachma_.

[Illustration 262 (Weights for Assay Balances)]

The above is how the "greater" weights are divided. The "lesser" weights
are made of silver or brass or copper. Of these, the first and largest
generally weighs one _drachma_, for it is necessary for us to weigh, not
only ore, but also metals to be assayed, and smaller quantities of lead.
The first of these weights is called a _centumpondium_ and the number of
_librae_ in it corresponds to the larger scale, being likewise one
hundred[42].

  The  1st is called  1 _centumpondium_.
   "   2nd    "      50 _librae_.
   "   3rd    "      25     "
   "   4th    "      16     "
   "   5th    "       8     "
   "   6th    "       4     "
   "   7th    "       2     "
   "   8th    "       1     "
   "   9th    "       1 _selibra_.
   "  10th    "       8 _semunciae_.
   "  11th    "       4     "
   "  12th    "       2     "
   "  13th    "       1     "
   "  14th    "       1 _sicilicus_.

The fourteenth is the last, for the proportionate weights which
correspond with a _drachma_ and half a _drachma_ are not used. On all
these weights of the lesser scale, are written the numbers of _librae_
and of _semunciae_. Some copper assayers divide both the lesser and
greater scale weights into divisions of a different scale. Their largest
weight of the greater scale weighs one hundred and twelve _librae_,
which is the first unit of measurement.

   1st  = 112 _librae_.
   2nd  =  64     "
   3rd  =  32     "
   4th  =  16     "
   5th  =   8     "
   6th  =   4     "
   7th  =   2     "
   8th  =   1     "
   9th  =   1 _selibra_ or sixteen _semunciae_.
  10th  =   8 _semunciae_.
  11th  =   4     "
  12th  =   2     "
  13th  =   1     "

As for the _selibra_ of the lesser weights, which our people, as I have
often said, call a _mark_, and the Romans call a _bes_, coiners who coin
gold, divide it just like the greater weights scale, into twenty-four
units of two _sextulae_ each, and each unit of two _sextulae_ is divided
into four _semi-sextulae_ and each _semi-sextula_ into three units of
four _siliquae_ each. Some also divide the separate units of four
_siliquae_ into four individual _siliquae_, but most, omitting the
_semi-sextulae_, then divide the double _sextula_ into twelve units of
four _siliquae_ each, and do not divide these into four individual
_siliquae_. Thus the first and greatest unit of measurement, which is
the _bes_, weighs twenty-four double _sextulae_.

  The 2nd = 12 double _sextulae_.
   "  3rd =  6   "          "
   "  4th =  3   "          "
   "  5th =  2   "          "
   "  6th =  1   "          "
   "  7th =  2 _semi-sextulae_ or four _semi-sextulae_.
   "  8th =  1 _semi-sextula_ or 3 units of 4 _siliquae_ each.
   "  9th =  2 units of four _siliquae_ each.
   " 10th =  1   "       "     "

Coiners who mint silver also divide the _bes_ of the lesser weights in
the same way as the greater weights; our people, indeed, divide it into
sixteen _semunciae_, and the _semuncia_ into eighteen units of four
_siliquae_ each.

There are ten weights which are placed in the other pan of the balance,
when they weigh the silver which remains from the copper that has been
consumed, when they assay the alloy with fire.

  The 1st = 16 _semunciae_ = 1 _bes_.
   "  2nd =  8       "
   "  3rd =  4       "
   "  4th =  2       "
   "  5th =  1       "   or 18 units of 4 _siliquae_ each.
   "  6th =  9 units of 4 _siliquae_ each.
   "  7th =  6       "       "
   "  8th =  3       "       "
   "  9th =  2       "       "
   " 10th =  1       "       "

The coiners of Nuremberg who mint silver, divide the _bes_ into sixteen
_semunciae_, but divide the _semuncia_ into four _drachmae_, and the
_drachma_ into four _pfennige_. They employ nine weights.

  The 1st = 16 _semunciae_.
   "  2nd =  8       "
   "  3rd =  4       "
   "  4th =  2       "
   "  5th =  1       "

For they divide the _bes_ in the same way as our own people, but since
they divide the _semuncia_ into four _drachmae_,

  the 6th weight = 2 _drachmae_.
   "  7th   "    = 1 _drachma_ or 4 _pfennige_.
   "  8th   "    = 2 _pfennige_.
   "  9th   "    = 1 _pfennig_.

The men of Cologne and Antwerp[43] divide the _bes_ into twelve units of
five _drachmae_ and one _scripulum_, which weights they call _nummi_.
Each of these they again divide into twenty-four units of four
_siliquae_ each, which they call _grenlins_. They have ten weights, of
which

  the 1st = 12 _nummi_ = 1 _bes_.
   "  2nd =  6   "
   "  3rd =  3   "
   "  4th =  2   "
   "  5th =  1   "     = 24 units of 4 _siliquae_ each.
   "  6th = 12 units of 4 _siliquae_ each.
   "  7th =  6   "           "
   "  8th =  3   "           "
   "  9th =  2   "           "
   " 10th =  1   "           "

And so with them, just as with our own people, the _mark_ is divided
into two hundred and eighty-eight _grenlins_, and by the people of
Nuremberg it is divided into two hundred and fifty-six _pfennige_.
Lastly, the Venetians divide the _bes_ into eight _unciae_. The _uncia_
into four _sicilici_, the _sicilicus_ into thirty-six _siliquae_. They
make twelve weights, which they use whenever they wish to assay alloys
of silver and copper. Of these

  the 1st =  8 _unciae_ = 1 _bes_.
   "  2nd =  4    "
   "  3rd =  2    "
   "  4th =  1    "  or 4 _sicilici_.
   "  5th =  2 _sicilici_.
   "  6th =  1 _sicilicus_.
   "  7th = 18 _siliquae_.
   "  8th =  9    "
   "  9th =  6    "
   " 10th =  3    "
   " 11th =  2    "
   " 12th =  1    "

Since the Venetians divide the _bes_ into eleven hundred and fifty-two
_siliquae_, or two hundred and eighty-eight units of 4 _siliquae_ each,
into which number our people also divide the _bes_, they thus make the
same number of _siliquae_, and both agree, even though the Venetians
divide the _bes_ into smaller divisions.

This, then, is the system of weights, both of the greater and the lesser
kinds, which metallurgists employ, and likewise the system of the lesser
weights which coiners and merchants employ, when they are assaying
metals and coined money. The _bes_ of the larger weight with which they
provide themselves when they weigh large masses of these things, I have
explained in my work _De Mensuris et Ponderibus_, and in another book,
_De Precio Metallorum et Monetis_.

[Illustration 265 (Balances): A--First small balance. B--Second.
C--Third, placed in a case.]

There are three small balances by which we weigh ore, metals, and
fluxes. The first, by which we weigh lead and fluxes, is the largest
among these smaller balances, and when eight _unciae_ (of the greater
weights) are placed in one of its pans, and the same number in the
other, it sustains no damage. The second is more delicate, and by this
we weigh the ore or the metal, which is to be assayed; this is well able
to carry one _centumpondium_ of the lesser weights in one pan, and in
the other, ore or metal as heavy as that weight. The third is the most
delicate, and by this we weigh the beads of gold or silver, which, when
the assay is completed, settle in the bottom of the cupel. But if anyone
weighs lead in the second balance, or an ore in the third, he will do
them much injury.

Whatsoever small amount of metal is obtained from a _centumpondium_ of
the lesser weights of ore or metal alloy, the same greater weight of
metal is smelted from a _centumpondium_ of the greater weight of ore or
metal alloy.

     END OF BOOK VII.


FOOTNOTES:

[1] We have but little record of anything which could be called
"assaying" among the Greeks and Romans. The fact, however, that they
made constant use of the touchstone (see note 37, p. 252) is sufficient
proof that they were able to test the purity of gold and silver. The
description of the touchstone by Theophrastus contains several
references to "trial" by fire (see note 37, p. 252). They were adepts at
metal working, and were therefore familiar with melting metals on a
small scale, with the smelting of silver, lead, copper, and tin ores
(see note 1, p. 353) and with the parting of silver and lead by
cupellation. Consequently, it would not require much of an imaginative
flight to conclude that there existed some system of tests of ore and
metal values by fire. Apart from the statement of Theophrastus referred
to, the first references made to anything which might fill the _role_ of
assaying are from the Alchemists, particularly Geber (prior to 1300),
for they describe methods of solution, precipitation, distillation,
fusing in crucibles, cupellation, and of the parting of gold and silver
by acid and by sulphur, antimony, or cementation. However, they were not
bent on determining quantitative values, which is the fundamental object
of the assayer's art, and all their discussion is shrouded in an obscure
cloak of gibberish and attempted mysticism. Nevertheless, therein lies
the foundation of many cardinal assay methods, and even of chemistry
itself.

The first explicit records of assaying are the anonymous booklets
published in German early in the 16th Century under the title
_Probierbuechlein_. Therein the art is disclosed well advanced toward
maturity, so far as concerns gold and silver, with some notes on lead
and copper. We refer the reader to Appendix B for fuller discussion of
these books, but we may repeat here that they are a collection of
disconnected recipes lacking in arrangement, the items often repeated,
and all apparently the inheritance of wisdom passed from father to son
over many generations. It is obviously intended as a sort of reminder to
those already skilled in the art, and would be hopeless to a novice.
Apart from some notes in Biringuccio (Book III, Chaps. 1 and 2) on
assaying gold and silver, there is nothing else prior to _De Re
Metallica_. Agricola was familiar with these works and includes their
material in this chapter. The very great advance which his account
represents can only be appreciated by comparison, but the exhaustive
publication of other works is foreign to the purpose of these notes.
Agricola introduces system into the arrangement of his materials,
describes implements, and gives a hundred details which are wholly
omitted from the previous works, all in a manner which would enable a
beginner to learn the art. Furthermore, the assaying of lead, copper,
tin, quicksilver, iron, and bismuth, is almost wholly new, together with
the whole of the argument and explanations. We would call the attention
of students of the history of chemistry to the general oversight of
these early 16th Century attempts at analytical chemistry, for in them
lie the foundations of that science. The statement sometimes made that
Agricola was the first assayer, is false if for no other reason than
that science does not develop with such strides at any one human hand.
He can, however, fairly be accounted as the author of the first proper
text-book upon assaying. Those familiar with the art will be astonished
at the small progress made since his time, for in his pages appear most
of the reagents and most of the critical operations in the dry analyses
of gold, silver, lead, copper, tin, bismuth, quicksilver, and iron of
to-day. Further, there will be recognised many of the "kinks" of the art
used even yet, such as the method of granulation, duplicate assays, the
"assay ton" method of weights, the use of test lead, the introduction of
charges in leaf lead, and even the use of beer instead of water to damp
bone-ash.

The following table is given of the substances mentioned requiring some
comment, and the terms adopted in this book, with notes for convenience
in reference. The German terms are either from Agricola's Glossary of
_De Re Metallica_, his _Interpretatio_, or the German Translation. We
have retained the original German spelling. The fifth column refers to
the page where more ample notes are given:--

  Terms             Latin.           German.          Remarks.          Further
   adopted.                                                              Notes.

  Alum              _Alumen_         _Alaun_          Either potassium    p. 564
                                                       or ammonia alum

  Ampulla           _Ampulla_        _Kolb_           A distillation jar

  Antimony          _Stibium_        _Spiesglas_      Practically always  p. 428
                                                       antimony sulphide

  _Aqua valens_     _Aqua valens_    _Scheidewasser_  Mostly nitric acid  p. 439
   or _aqua_

  Argol             _Feces vini      _Die             Crude tartar        p. 234
                     siccae_          weinheffen_

  Ash of lead       _Nigrum                           Artificial lead     p. 237
                     plumbum                          sulphide
                     cinereum_

  Ash of musk ivy   _Sal ex          _Salalkali_      Mostly potash       p. 560
   (Salt made        anthyllidis
   from)             cinere factus_

  Ashes which       _Cineres quo                      Mostly potash       p. 559
   wool-dyers use     infectores
                      lanarum
                      utuntur_

  Assay            _Venas experiri_  _Probiren_

  Assay furnace    _Fornacula_       _Probir ofen_    "Little" furnace

  Azure            _Caeruleum_       _Lasur_          Partly copper       p. 110
                                                       carbonate
                                                       (azurite)
                                                       partly silicate

  Bismuth           _Plumbum         _Wismut_         _Bismuth_           p. 433
                     Cinereum_

  Bitumen           _Bitumen_        _Bergwachs_                          p. 581

  Blast furnace     _Prima fornax_   _Schmeltzofen_

  Borax             _Chrysocolla ex  _Borras; Tincar_                     p. 560
                     nitro
                     confecta;
                     chrysocolla
                     quam boracem
                     nominant_

  Burned alum       _Alumen coctum_  _Gesottener      Probably            p. 565
                                      alaun_           dehydrated alum

  _Cadmia_                                            (1) Furnace         p. 112
   (see note                                           accretions (2)
    8, p. 112)                                         Calamine (3) Zinc
                                                       blende (4) Cobalt
                                                       arsenical sulphides

  Camphor           _Camphora_       _Campffer_                           p. 238

  Chrysocolla
   called borax
   (see borax)

  Chrysocolla       _Chrysocolla_    _Berggruen und    Partly              p. 110
   (copper                            Schifergruen_     chrysocolla,
   mineral)                                            partly malachite

  Copper filings    _Aeris scobs     _Kupferfeilich_  Apparently finely   p. 233
                     elimata_                          divided copper
                                                       metal

  Copper flowers    _Aeris flos_     _Kupferbraun_    Cupric oxide        p. 538

  Copper scales     _Aeris squamae_  _Kupfer          Probably cupric
                                      hammerschlag     oxide
                                      oder kessel
                                      braun_

  Copper
   minerals (see
   note 8,
   p. 109)

  Crucible          _Catillus        _Dreieckicht-    See illustration    p. 229
   (triangular)      triangularis_    schirbe_

  Cupel             _Catillus        _Capelle_
                     cinereus_

  Cupellation       _Secunda         _Treibherd_
   furnace           fornax_

  Flux              _Additamentum_   _Zusetze_                            p. 232

  Furnace           _Cadmia          _Mitlere und
   accretions        fornacum_        obere
                                      offenbrueche_

  Galena            _Lapis           _Glantz_         Lead sulphide       p. 110
                     plumbarius_

  Glass-gall        _Recrementum     _Glassgallen_    Skimmings from      p. 235
                     vitri_                            glass melting

  Grey antimony or  _Stibi_ or       _Spiesglas_      Antimony sulphide,  p. 428
   stibium            _stibium_                        stibnite

  Hearth-lead       _Molybdaena_     _Herdplei_       The saturated       p. 476
                                                       furnace bottoms
                                                       from cupellation

  Hoop (iron)       _Circulus        _Ring_           A forge for         p. 226
                     ferreus_                          crucibles

  Iron filings     _Ferri scobs      _Eisen feilich_  Metallic iron
                    elimata_

  Iron scales       _Squamae ferri_  _Eisen           Partly iron oxide
                                      hammerschlag_

  Iron slag         _Recrementum     _Sinder_
                     ferri_

  Lead ash          _Cinis plumbi    _Pleiasche_      Artificial lead     p. 237
                     nigri_                            sulphide

  Lead granules     _Globuli         _Gekornt plei_   Granulated lead
                     plumbei_

  Lead ochre        _Ochra           _Pleigeel_       Modern massicot     p. 232
                     plumbaria_                        (PbO)

  Lees of _aqua_    _Feces aquarum   _Scheidewasser   Uncertain           p. 234
   which separates   quae aurum ab    heffe_
   gold from         argento
   silver            secernunt_

  Dried lees of     _Siccae feces    _Heffe des       Argol               p. 234
   vinegar           aceti_           essigs_

  Dried lees of     _Feces vini       _Wein heffen_   Argol               p. 234
   wine              siccae_

  Limestone         _Saxum calcis_   _Kalchstein_

  Litharge          _Spuma argenti_  _Glette_

  Lye               _Lixivium_       _Lauge durch     Mostly potash       p. 233
                                      asschen
                                      gemacht_

  Muffle            _Tegula_         _Muffel_         Latin, literally
                                                       "Roof-tile"

  Operculum         _Operculum_      _Helm oder       Helmet or cover
                                      alembick_        for a distillation
                                                       jar

  Orpiment          _Auripigmentum_  _Operment_       Yellow sulphide     p. 111
                                                       of arsenic
                                                       (As_{2}S_{3})

  Pyrites           _Pyrites_        _Kis_            Rather a genus      p. 112
                                                       of sulphides,
                                                       than iron
                                                       pyrite in
                                                       particular

  Pyrites (Cakes    _Panes ex        _Stein_          Iron or Copper      p. 350
    from)            pyrite                            matte
                     conflati_

  Realgar           _Sandaraca_      _Rosgeel_        Red sulphide of     p. 111
                                                       arsenic (AsS)

  Red lead          _Minium_         _Menning_        Pb_{3}O_{4}         p. 232

  Roasted copper    _Aes ustum_      _Gebrandt        Artificial          p. 233
                                      kupffer_         copper
                                                       sulphide (?)

  Salt              _Sal_            _Saltz_          NaCl                p. 233

  Salt (Rock)       _Sal fossilis_   _Berg saltz_     NaCl                p. 233

  _Sal              _Sal                              A stock flux?       p. 236
   artificiosus_     artificiosus_

  Sal ammoniac      _Sal             _Salarmoniac_    NH_{4}Cl            p. 560
                     ammoniacus_

  Saltpetre         _Halinitrum_     _Salpeter_       KNO_{3}             p. 561

  Salt (refined)    _Sal facticius                    NaCl
                     purgatus_

  _Sal tostus_      _Sal tostus_     _Geroest saltz_   Apparently          p. 233
                                                       simply heated or
                                                       melted common
                                                       salt

  _Sal              _Sal             _Geroest saltz_                       p. 233
   torrefactus_      torrefactus_

  Salt (melted)     _Sal             _Geflossen       Melted salt or      p. 233
                     liquefactus_     saltz_           salt glass

  Scorifier         _Catillus        _Scherbe_
                     fictilis_

  Schist            _Saxum fissile_  _Schifer_

  Silver minerals
   (see note 8,
   p. 108)

  Slag              _Recrementum_    _Schlacken_

  Soda              _Nitrum_                          Mostly soda from    p. 558
                                                       Egypt,
                                                       Na_{2}CO_{3}

  Stones which      _Lapides qui     _Flues_           Quartz and          p. 380
   easily melt       facile igni                       fluorspar
                     liquescunt_

  Sulphur           _Sulfur_         _Schwefel_                           p. 579

  _Tophus_          _Tophus_         _Topstein_       Marl(?)             p. 233

  Touchstone        _Coticula_       _Goldstein_

  Venetian glass    _Venetianum
                     vitrum_

  Verdigris         _Aerugo          _Gruenspan_       Copper              p. 440
                     oder                              sub-acetate
                     Spanschgruen_

  Vitriol           _Atramentum      _Kupferwasser_   Mostly FeSO_{4}     p. 572
                     sutorium_

  White schist      _Saxum fissile   _Weisser                             p. 234
                     album_           schifer_

  Weights (see
    Appendix).


[2] _Crudorum_,--unbaked?

[3] This reference is not very clear. Apparently the names refer to the
German terms _probier ofen_ and _windt ofen_.

[4] _Circulus_. This term does not offer a very satisfactory equivalent,
as such a furnace has no distinctive name in English. It is obviously a
sort of forge for fusing in crucibles.

[5] _Spissa_,--"Dry." This term is used in contra-distinction to
_pingue_, unctuous or "fatty."

[6] _Additamenta_,--"Additions." Hence the play on words.

We have adopted "flux" because the old English equivalent for all these
materials was "flux," although in modern nomenclature the term is
generally restricted to those substances which, by chemical combination
in the furnace, lower the melting point of some of the charge. The
"additions" of Agricola, therefore, include reducing, oxidizing,
sulphurizing, desulphurizing, and collecting agents as well as fluxes. A
critical examination of the fluxes mentioned in the next four pages
gives point to the Author's assertion that "some are of a very
complicated nature." However, anyone of experience with home-taught
assayers has come in contact with equally extraordinary combinations.
The four orders of "additions" enumerated are quite impossible to
reconcile from a modern metallurgical point of view.

[7] _Minium secundarium_. (_Interpretatio_,--_menning_. Pb_{3}O_{4}).
Agricola derived his Latin term from Pliny. There is great confusion in
the ancient writers on the use of the word _minium_, for prior to the
Middle Ages it was usually applied to vermilion derived from cinnabar.
Vermilion was much adulterated with red-lead, even in Roman times, and
finally in later centuries the name came to be appropriated to the lead
product. Theophrastus (103) mentions a substitute for vermilion, but, in
spite of commentators, there is no evidence that it was red-lead. The
first to describe the manufacture of real red-lead was apparently
Vitruvius (VII, 12), who calls it _sandaraca_ (this name was usually
applied to red arsenical sulphide), and says: "White-lead is heated in a
furnace and by the force of the fire becomes red lead. This invention
was the result of observation in the case of an accidental fire, and by
the process a much better material is obtained than from the mines." He
describes _minium_ as the product from cinnabar. Dioscorides (V, 63),
after discussing white-lead, says it may be burned until it becomes the
colour of _sandaracha_, and is called _sandyx_. He also states (V, 69)
that those are deceived who consider cinnabar to be the same as
_minium_, for _minium_ is made in Spain out of stone mixed with silver
sands. Therefore he is not in agreement with Vitruvius and Pliny on the
use of the term. Pliny (XXXIII, 40) says: "These barren stones
(apparently lead ores barren of silver) may be recognised by their
colour; it is only in the furnace that they turn red. After being
roasted it is pulverized and is _minium secundarium_. It is known to few
and is very inferior to the natural kind made from those sands we have
mentioned (_cinnabar_). It is with this that the genuine _minium_ is
adulterated in the works of the Company." This proprietary company who
held a monopoly of the Spanish quicksilver mines, "had many methods of
adulterating it (_minium_)--a source of great plunder to the Company."
Pliny also describes the making of red lead from white.

[8] _Ochra plumbaria_. (_Interpretatio_,--_pleigeel_; modern
German,--_Bleigelb_). The German term indicates that this "Lead Ochre,"
a form of PbO, is what in the English trade is known as _massicot_, or
_masticot_. This material can be a partial product from almost any
cupellation where oxidation takes place below the melting point of the
oxide. It may have been known to the Ancients among the various species
into which they divided litharge, but there is no valid reason for
assigning to it any special one of their terms, so far as we can see.

[9] There are four forms of copper named as re-agents by Agricola:

  Copper filings    _Aeris scobs elimata._
  Copper scales     _Aeris squamae._
  Copper flowers    _Aeris flos._
  Roasted copper    _Aes ustum._

The first of these was no doubt finely divided copper metal; the second,
third, and fourth were probably all cupric oxide. According to Agricola
(_De Nat. Fos._, p. 352), the scales were the result of hammering the
metal; the flowers came off the metal when hot bars were quenched in
water, and a third kind were obtained from calcining the metal. "Both
flowers (_flos_) and hammer-scales (_squama_) have the same properties
as _crematum_ copper.... The particles of flower copper are finer than
scales or _crematum_ copper." If we assume that the verb _uro_ used in
_De Re Metallica_ is of the same import as _cremo_ in the _De Natura
Fossilium_, we can accept this material as being merely cupric oxide,
but the _aes ustum_ of Pliny--Agricola's usual source of technical
nomenclature--is probably an artificial sulphide. Dioscorides (V, 47),
who is apparently the source of Pliny's information, says:--"Of _chalcos
cecaumenos_, the best is red, and pulverized resembles the colour of
cinnabar; if it turns black, it is over-burnt. It is made from broken
ship nails put into a rough earthen pot, with alternate layers of equal
parts of sulphur and salt. The opening should be smeared with potter's
clay and the pot put in the furnace until it is thoroughly heated," etc.
Pliny (XXXIV, 23) states: "Moreover Cyprian copper is roasted in crude
earthen pots with an equal amount of sulphur; the apertures of the pots
are well luted, and they are kept in the furnace until the pot is
thoroughly heated. Some add salt, others use _alumen_ instead of
sulphur, others add nothing, but only sprinkle it with vinegar."

[10] The reader is referred to note 6, p. 558, for more ample discussion
of the alkalis. Agricola gives in this chapter four substances of that
character:

     Soda (_nitrum_). Lye. "Ashes which wool-dyers use." "Salt made
     from the ashes of musk ivy."

The last three are certainly potash, probably impure. While the first
might be either potash or soda, the fact that the last three are
mentioned separately, together with other evidence, convinces us that by
the first is intended the _nitrum_ so generally imported into Europe
from Egypt during the Middle Ages. This imported salt was certainly the
natural bicarbonate, and we have, therefore, used the term "soda."

[11] In this chapter are mentioned seven kinds of common salt:

  Salt            _Sal._
  Rock salt       _Sal fossilis._
  "Made" salt     _Sal facticius._
  Refined salt    _Sal purgatius._
  Melted salt     _Sal liquefactus._

And in addition _sal tostus_ and _sal torrefactus_. _Sal facticius_ is
used in distinction from rock-salt. The melted salt would apparently be
salt-glass. What form the _sal tostus_ and _sal torrefactus_ could have
we cannot say, however, but they were possibly some form of heated salt;
they may have been combinations after the order of _sal artificiosus_
(see p. 236).

[12] "Stones which easily melt in hot furnaces and sand which is made
from them" (_lapides qui in ardentibus fornacibus facile liquescunt
arenae ab eis resolutae_). These were probably quartz in this instance,
although fluorspar is also included in this same genus. For fuller
discussion see note on p. 380.

[13] _Tophus_. (_Interpretatio_, _Toffstein oder topstein_). According
to Dana (Syst. of Min., p. 678), the German _topfstein_ was English
potstone or soapstone, a magnesian silicate. It is scarcely possible,
however, that this is what Agricola meant by this term, for such a
substance would be highly infusible. Agricola has a good deal to say
about this mineral in _De Natura Fossilium_ (p. 189 and 313), and from
these descriptions it would seem to be a tufaceous limestone of various
sorts, embracing some marls, stalagmites, calcareous sinter, etc. He
states: "Generally fire does not melt it, but makes it harder and breaks
it into powder. Tophus is said to be a stone found in caverns, made from
the dripping of stone juice solidified by cold ... sometimes it is found
containing many shells, and likewise the impressions of alder leaves;
our people make lime by burning it." Pliny, upon whom Agricola depends
largely for his nomenclature, mentions such a substance (XXXVI, 48):
"Among the multitude of stones there is _tophus_. It is unsuitable for
buildings, because it is perishable and soft. Still, however, there are
some places which have no other, as Carthage, in Africa. It is eaten
away by the emanations from the sea, crumbled to dust by the wind, and
washed away by the rain." In fact, _tophus_ was a wide genus among the
older mineralogists, Wallerius (_Meditationes Physico-Chemicae De
Origine Mundi_, Stockholm, 1776, p. 186), for instance, gives 22
varieties. For the purposes for which it is used we believe it was
always limestone of some form.

[14] _Saxum fissile album._ (_The Interpretatio_ gives the German as
_schifer_). Agricola mentions it in _Bermannus_ (459), in _De Natura
Fossilium_ (p. 319), but nothing definite can be derived from these
references. It appears to us from its use to have been either a
quartzite or a fissile limestone.

[15] Argol (_Feces vini siccae_,--"Dried lees of wine." Germ. trans.
gives _die wein heffen_, although the usual German term of the period
was _weinstein_). The lees of wine were the crude tartar or argols of
commerce and modern assayers. The argols of white wine are white, while
they are red from red wine. The white argol which Agricola so often
specifies would have no special excellence, unless it may be that it is
less easily adulterated. Agricola (_De Nat. Fos._, p. 344) uses the
expression "_Fex vini sicca_ called _tartarum_"--one of the earliest
appearances of the latter term in this connection. The use of argol is
very old, for Dioscorides (1st Century A.D.) not only describes argol,
but also its reduction to impure potash. He says (V, 90): "The lees
(_tryx_) are to be selected from old Italian wine; if not, from other
similar wine. Lees of vinegar are much stronger. They are carefully
dried and then burnt. There are some who burn them in a new earthen pot
on a large fire until they are thoroughly incinerated. Others place a
quantity of the lees on live coals and pursue the same method. The test
as to whether it is completely burned, is that it becomes white or blue,
and seems to burn the tongue when touched. The method of burning lees of
vinegar is the same.... It should be used fresh, as it quickly grows
stale; it should be placed in a vessel in a secluded place." Pliny
(XXIII, 31) says: "Following these, come the lees of these various
liquids. The lees of wine (_vini faecibus_) are so powerful as to be
fatal to persons on descending into the vats. The test for this is to
let down a lamp, which, if extinguished, indicates the peril.... Their
virtues are greatly increased by the action of fire." Matthioli,
commenting on this passage from Dioscorides in 1565, makes the following
remark (p. 1375): "The precipitate of the wine which settles in the
casks of the winery forms stone-like crusts, and is called by the
works-people by the name _tartarum_." It will be seen above that these
lees were rendered stronger by the action of fire, in which case the
tartar was reduced to potassium carbonate. The _weinstein_ of the old
German metallurgists was often the material lixiviated from the
incinerated tartar.

Dried lees of vinegar (_siccae feces aceti_; _Interpretatio_, _die heffe
des essigs_). This would also be crude tartar. Pliny (XXIII, 32) says:
"The lees of vinegar (_faex aceti_); owing to the more acrid material
are more aggravating in their effects.... When combined with
_melanthium_ it heals the bites of dogs and crocodiles."

[16] Dried lees of _aqua_ which separates gold and silver. (_Siccae
feces aquarum quae aurum ab argento secernunt_. German translation, _Der
scheidwasser heffe_). There is no pointed description in Agricola's
works, or in any other that we can find, as to what this material was.
The "separating _aqua_" was undoubtedly nitric acid (see p. 439, Book
X). There are two precipitates possible, both referred to as
_feces_,--the first, a precipitate of silver chloride from clarifying
the _aqua valens_, and the second, the residues left in making the acid
by distillation. It is difficult to believe that silver chloride was the
_feces_ referred to in the text, because such a precipitate would be
obviously misleading when used as a flux through the addition of silver
to the assays, too expensive, and of no merit for this purpose.
Therefore one is driven to the conclusion that the _feces_ must have
been the residues left in the retorts when nitric acid was prepared. It
would have been more in keeping with his usual mode of expression,
however, to have referred to this material as a _residuus_. The
materials used for making acid varied greatly, so there is no telling
what such a _feces_ contained. A list of possibilities is given in note
8, p. 443. In the main, the residue would be undigested vitriol, alum,
saltpetre, salt, etc., together with potassium, iron, and alum
sulphates. The _Probierbuechlin_ (p. 27) also gives this re-agent under
the term _Toden kopff das ist schlam oder feces auss dem scheydwasser_.

[17] _Recrementum vitri_. (_Interpretatio_, _Glassgallen_). Formerly,
when more impure materials were employed than nowadays, the surface of
the mass in the first melting of glass materials was covered with salts,
mostly potassium and sodium sulphates and chlorides which escaped
perfect vitrification. This "slag" or "_glassgallen_" of Agricola was
also termed _sandiver_.

[18] The whole of this expression is "_candidus, candido_." It is by no
means certain that this is tin, for usually tin is given as _plumbum
candidum_.

[19] _Sal artificiosus_. These are a sort of stock fluxes. Such mixtures
are common in all old assay books, from the _Probierbuechlin_ to later
than John Cramer in 1737 (whose Latin lectures on Assaying were
published in English under the title of "Elements of the Art of Assaying
Metals," London, 1741). Cramer observes (p. 51) that: "Artificers
compose a great many fluxes with the above-mentioned salts and with the
reductive ones; nay, some use as many different fluxes as there are
different ores and metals; all which, however, we think needless to
describe. It is better to have explained a few of the simpler ones,
which serve for all the others, and are very easily prepared, than to
tire the reader with confused compositions: and this chiefly because
unskilled artificers sometimes attempt to obtain with many ingredients
of the same nature heaped up beyond measure, and with much labour,
though not more properly and more securely, what might have been easily
effected, with one only and the same ingredient, thus increasing the
number, not at all the virtue of the things employed. Nevertheless, if
anyone loves variety, he may, according to the proportions and cautions
above prescribed, at his will chuse among the simpler kinds such as will
best suit his purpose, and compose a variety of fluxes with them."

[20] This operation apparently results in a coating to prevent the
deflagration of the saltpetre--in fact, it might be permitted to
translate _inflammatur_ "deflagrate," instead of kindle.

[21] The results which would follow from the use of these "fluxes" would
obviously depend upon the ore treated. They can all conceivably be
successful. Of these, the first is the lead-glass of the German
assayers--a flux much emphasized by all old authorities, including
Lohneys, Ercker and Cramner, and used even yet. The "powerful flux"
would be a reducing, desulphurizing, and an acid flux. The "more
powerful" would be a basic flux in which the reducing action of the
argols would be largely neutralised by the nitre. The "still more
powerful" would be a strongly sulphurizing basic flux, while the "most
powerful" would be a still more sulphurizing flux, but it is badly mixed
as to its oxidation and basic properties. (See also note 19 on _sal
artificiosus_).

[22] Lead ash (_Cinis Plumbi_. Glossary, _Pleyasch_).--This was
obviously, from the method of making, an artificial lead sulphide.

[23] Ashes of lead (_Nigri plumbi cinis_). This, as well as lead ash,
was also an artificial lead sulphide. Such substances were highly valued
by the Ancients for medicinal purposes. Dioscorides (V, 56) says:
"Burned lead (_Molybdos cecaumenos_) is made in this way: Sprinkle
sulphur over some very thinnest lead plates and put them into a new
earthen pot, add other layers, putting sulphur between each layer until
the pot is full; set it alight and stir the melted lead with an iron rod
until it is entirely reduced to ashes and until none of the lead remains
unburned. Then take it off, first stopping up your nose, because the
fumes of burnt lead are very injurious. Or burn the lead filings in a
pot with sulphur as aforesaid." Pliny (XXXIV., 50) gives much the same
directions.

[24] Camphor (_camphora_). This was no doubt the well-known gum.
Agricola, however, believed that camphor (_De Nat. Fossilium_, p. 224)
was a species of bitumen, and he devotes considerable trouble to the
refutation of the statements by the Arabic authors that it was a gum. In
any event, it would be a useful reducing agent.

[25] Inasmuch as orpiment and realgar are both arsenical sulphides, the
use of iron "slag," if it contains enough iron, would certainly matte
the sulphur and arsenic. Sulphur and arsenic are the "juices" referred
to (see note 4, p. 1). It is difficult to see the object of preserving
the antimony with such a sulphurizing "addition," unless it was desired
to secure a regulus of antimony alone from a given antimonial ore.

[26] The lead free from silver, called _villacense_, was probably from
Bleyberg, not far from Villach in Upper Austria, this locality having
been for centuries celebrated for its pure lead. These mines were worked
prior to, and long after, Agricola's time.

[27] This method of proportionate weights for assay charges is simpler
than the modern English "assay ton," both because of the use of 100
units in the standard of weight (the _centumpondium_), and because of
the lack of complication between the Avoirdupois and Troy scales. For
instance, an ore containing a _libra_ of silver to the _centumpondium_
would contain 1/100th part, and the same ratio would obtain, no matter
what the actual weight of a _centumpondium_ of the "lesser weight" might
be. To follow the matter still further, an _uncia_ being 1/1,200 of a
_centumpondium_, if the ore ran one "_uncia_ of the lesser weight" to
the "_centumpondium_ of the lesser weight," it would also run one actual
_uncia_ to the actual _centumpondium_; it being a matter of indifference
what might be the actual weight of the _centumpondium_ upon which the
scale of lesser weights is based. In fact Agricola's statement (p. 261)
indicates that it weighed an actual _drachma_. We have, in some places,
interpolated the expressions "lesser" and "greater" weights for clarity.

This is not the first mention of this scheme of lesser weights, as it
appears in the _Probierbuechlein_ (1500? see Appendix B) and Biringuccio
(1540). For a more complete discussion of weights and measures see
Appendix C. For convenience, we repeat here the Roman scale, although,
as will be seen in the Appendix, Agricola used the Latin terms in many
places merely as nomenclature equivalents of the old German scale.

                                                                   Ozs.
                                                                       dwts.
                                         Troy                             gr.
                                        Grains.                per short ton.
    1 _Siliqua_                            2.87 Per _Centumpondium_  0   3  9
    6 _Siliquae_  =  1 _Scripulum_         17.2  "       "           1   0  6
    4 _Scripula_  =  1 _Sextula_           68.7  "       "           4   1  0
    6 _Sextulae_  =  1 _Uncia_            412.2  "       "          24   6  2
   12 _Unciae_    =  1 _Libra_           4946.4  "       "         291  13  8
  100 _Librae_    =  1 _Centumpondium_ 494640.0

However Agricola may occasionally use

   16 _Unciae_    =  1 _Libra_           6592.0 (?)
  100 _Librae_    =  1 _Centumpondium_ 659200.0 (?)

Also

                                                                    Oz.
                                                                       dwts.
                                                                           gr.
                                                                per short ton.
  1 _Scripulum_                            17.2 Per _Centumpondium_  1   0   6
  3 _Scripula_    =  1 _Drachma_           51.5  "        "          3   0  19
  2 _Drachmae_    =  1 _Sicilicus_        103.0  "        "          6   1  15
  4 _Sicilici_    =  1 _Uncia_            412.2  "        "         24   6  12
  8 _Unciae_      =  1 _Bes_             3297.6  "        "        194  12   0

[28] The amalgamation of gold ores is fully discussed in note 12, p.
297.

[29] For discussion of the silver ores, see note 8, p. 108. _Rudis_
silver was a fairly pure silver mineral, the various coloured silvers
were partly horn-silver and partly alteration products.

[30] It is difficult to see why copper scales (_squamae aeris_--copper
oxide?) are added, unless it be to collect a small ratio of copper in
the ore. This additional copper is not mentioned again, however. The
whole of this statement is very confused.

[31] This old story runs that Hiero, King of Syracuse, asked Archimedes
to tell him whether a crown made for him was pure gold or whether it
contained some proportion of silver. Archimedes is said to have puzzled
over it until he noticed the increase in water-level upon entering his
bath. Whereupon he determined the matter by immersing bars of pure gold
and pure silver, and thus determining the relative specific weights. The
best ancient account of this affair is to be found in Vitruvius, IX,
Preface. The story does not seem very probable, seeing that
Theophrastus, who died the year Archimedes was born, described the
touchstone in detail, and that it was of common knowledge among the
Greeks before (see note 37). In any event, there is not sufficient
evidence in this story on which to build the conclusion of Meyer (Hist.
of Chemistry, p. 14) and others, that, inasmuch as Archimedes was unable
to solve the problem until his discovery of specific weights, therefore
the Ancients could not part gold and silver. The probability that he did
not want to injure the King's jewellery would show sufficient reason for
his not parting these metals. It seems probable that the Ancients did
part gold and silver by cementation. (See note on p. 458).

[32] The Alchemists (with whose works Agricola was familiar--_vide_
preface) were the inventors of nitric acid separation. (See note on p.
460).

[33] Parting gold and silver by nitric acid is more exhaustively
discussed in Book X. and note 10, p. 443.

[34] The lesser weights, probably.

[35] Lead and Tin seem badly mixed in this paragraph.

[36] It is not clear what is added.

[37] HISTORICAL NOTE ON TOUCHSTONE. (_Coticula_.
_Interpretatio_,--_Goldstein_). Theophrastus is, we believe, the first
to describe the touchstone, although it was generally known to the
Greeks, as is evidenced by the metaphors of many of the poets,--Pindar,
Theognis, Euripides, etc. The general knowledge of the constituents of
alloys which is implied, raises the question as to whether the Greeks
did not know a great deal more about parting metals, than has been
attributed to them. Theophrastus says (78-80): "The nature of the stone
which tries gold is also very wonderful, as it seems to have the same
power with fire; which is also a test of that metal. Some people have
for this reason questioned the truth of this power in the stone, but
their doubts are ill-founded, for this trial is not of the same nature
or made in the same manner as the other. The trial by fire is by the
colour and by the quantity lost by it; but that by the stone is made
only by rubbing the metal on it; the stone seeming to have the power to
receive separately the distinct particles of different metals. It is
said also that there is a much better kind of this stone now found out,
than that which was formerly used; insomuch that it now serves not only
for the trial of refined gold, but also of copper or silver coloured
with gold; and shows how much of the adulterating matter by weight is
mixed with gold; this has signs which it yields from the smallest weight
of the adulterating matter, which is a grain, from thence a colybus, and
thence a quadrans or semi-obolus, by which it is easy to distinguish if,
and in what degree, that metal is adulterated. All these stones are
found in the River Tmolus; their texture is smooth and like that of
pebbles; their figure broad, not round; and their bigness twice that of
the common larger sort of pebbles. In their use in the trial of metals
there is a difference in power between their upper surface, which has
lain toward the sun, and their under, which has been to the earth; the
upper performing its office the more nicely; and this is consonant to
reason, as the upper part is dryer; for the humidity of the other
surface hinders its receiving so well the particles of metals; for the
same reason also it does not perform its office as well in hot weather
as in colder, for in the hot it emits a kind of humidity out of its
substance, which runs all over it. This hinders the metalline particles
from adhering perfectly, and makes mistakes in the trials. This
exudation of a humid matter is also common to many other stones, among
others, to those of which statues are made; and this has been looked on
as peculiar to the statue." (Based on Hill's trans.) This humid
"exudation of fine-grained stones in summer" would not sound abnormal if
it were called condensation. Pliny (XXXIII, 43) says: "The mention of
gold and silver should be accompanied by that of the stone called
_coticula_. Formerly, according to Theophrastus, it was only to be found
in the river Tmolus but now found in many parts, it was found in small
pieces never over four inches long by two broad. That side which lay
toward the sun is better than that toward the ground. Those experienced
with the _coticula_ when they rub ore (_vena_) with it, can at once say
how much gold it contains, how much silver or copper. This method is so
accurate that they do not mistake it to a scruple." This purported use
for determining values of _ore_ is of about Pliny's average accuracy.
The first detailed account of touch-needles and their manner of making,
which we have been able to find, is that of the _Probierbuechlein_ (1527?
see Appendix) where many of the tables given by Agricola may be found.

[38] _De Natura Fossilium_ (p. 267) and _De Ortu et Causis
Subterraneorum_ (p. 59). The author does not add any material
mineralogical information to the quotations from Theophrastus and Pliny
given above.

[39] In these tables Agricola has simply adopted Roman names as
equivalents of the old German weights, but as they did not always
approximate in proportions, he coined terms such as "units of 4
_siliquae_," etc. It might seem more desirable to have introduced the
German terms into this text, but while it would apply in this instance,
as we have discussed on p. 259, the actual values of the Roman weights
are very different from the German, and as elsewhere in the book actual
Roman weights are applied, we have considered it better to use the Latin
terms consistently throughout. Further, the obsolete German would be to
most readers but little improvement upon the Latin. For convenience of
readers we set out the various scales as used by Agricola, together with
the German:--

            ROMAN SCALE.                   OLD GERMAN SCALE.
   6 _Siliquae_  = 1 _Scripulum_       3 _Grenlin_ = 1 _Gran_
   4 _Scripula_  = 1 _Sextula_         4 _Gran_    = 1 _Krat_
   2 _Sextulae_  = 1 _Duella_         24 _Kratt_   = 1 _Mark_
  24 _Duellae_   = 1 _Bes_                       or
                                      24 _Grenlin_ = 1  "_Nummus_"
                                      12 "_Nummi_" = 1 _Mark_

Also the following scales are applied to fineness by Agricola:--

   3 _Scripula_  = 1 _Drachma_       4 _Pfennige_  = 1 _Quintlein_
   2 _Drachmae_  = 1 _Sicilicus_     4 _Quintlein_ = 1 _Loth_
   2 _Sicilici_  = 1 _Semuncia_     16 _Loth_      = 1 _Mark_
  16 _Semunciae_ = 1 _Bes_

The term "_nummus_," a coin, given above and in the text, appears in the
German translation as _pfennig_ as applied to both German scales, but as
they are of different values, we have left Agricola's adaptation in one
scale to avoid confusion. The Latin terms adopted by Agricola are given
below, together with the German:--

                                                 Number in one  Value in
  Roman Term.               German Term.         Mark or Bes.   _Siliquae_.

  _Siliqua_                                          1152             1

  "Unit of 4 _Siliquae_"    _Grenlin_                 288             4

                            _Pfennig_                 256            --

  _Scripulum_               _Scruple_ (?)             192             6

  _Semi-sextula_            _Gran_                     96            12

  _Drachma_                 _Quintlein_                64            18

  _Sextula_                 _Halb Krat_                48            24

  _Sicilicus_               _Halb Loth_                32            36

  _Duella_                  _Krat_                     24            48

  _Semuncia_                _Loth_                     16            72

  "_Unit of 5 Drachmae      "_Nummus_"                 12            96
    & 1 Scripulum_"

  _Uncia_                   _Untzen_                    8           144

  _Bes_                     _Mark_                      1          1152

While the proportions in a _bes_ or _mark_ are the same in both scales,
the actual weight values are vastly different--for instance, the _mark_
contained about 3609.6, and the _bes_ 3297 Troy Grains. Agricola also
uses:

  _Selibra_          _Halb-pfundt_
  _Libra_            _Pfundt_
  _Centumpondium_    _Centner_.

As the Roman _libra_ contains 12 _unciae_ and the German _pfundt_ 16
_untzen_, the actual weights of these latter quantities are still
further apart--the former 4946 and the latter 7219 Troy grains.

[40] There are no tables in the Latin text, the whole having been
written out _in extenso_, but they have now been arranged as above, as
being in a much more convenient and expressive form.

[41] See note 39 above.

[42] See note 27, p. 242, for discussion of this "Assay ton"
arrangement.

[43] _Agrippinenses_ and _Antuerpiani_.




BOOK VIII.


Questions of assaying were explained in the last Book, and I have now
come to a greater task, that is, to the description of how we extract
the metals. First of all I will explain the method of preparing the
ore[1]; for since Nature usually creates metals in an impure state,
mixed with earth, stones, and solidified juices, it is necessary to
separate most of these impurities from the ores as far as can be, before
they are smelted, and therefore I will now describe the methods by which
the ores are sorted, broken with hammers, burnt, crushed with stamps,
ground into powder, sifted, washed, roasted, and calcined[2].

I will start at the beginning with the first sort of work. Experienced
miners, when they dig the ore, sort the metalliferous material from
earth, stones, and solidified juices before it is taken from the shafts
and tunnels, and they put the valuable metal in trays and the waste into
buckets. But if some miner who is inexperienced in mining matters has
omitted to do this, or even if some experienced miner, compelled by some
unavoidable necessity, has been unable to do so, as soon as the material
which has been dug out has been removed from the mine, all of it should
be examined, and that part of the ore which is rich in metal sorted from
that part of it which is devoid of metal, whether such part be earth, or
solidified juices, or stones. To smelt waste together with an ore
involves a loss, for some expenditure is thrown away, seeing that out of
earth and stones only empty and useless slags are melted out, and
further, the solidified juices also impede the smelting of the metals
and cause loss. The rock which lies contiguous to rich ore should also
be broken into small pieces, crushed, and washed, lest any of the
mineral should be lost. When, either through ignorance or carelessness,
the miners while excavating have mixed the ore with earth or broken
rock, the work of sorting the crude metal or the best ore is done not
only by men, but also by boys and women. They throw the mixed material
upon a long table, beside which they sit for almost the whole day, and
they sort out the ore; when it has been sorted out, they collect it in
trays, and when collected they throw it into tubs, which are carried to
the works in which the ores are smelted.

[Illustration 268 (Sorting Ore): A--Long table. B--Tray. C--Tub.]

[Illustration 269 (Cutting Metal): A--Masses of metal. B--Hammer.
C--Chisel. D--Tree stumps. E--Iron tool similar to a pair of shears.]

The metal which is dug out in a pure or crude state, to which class
belong native silver, silver glance, and gray silver, is placed on a
stone by the mine foreman and flattened out by pounding with heavy
square hammers. These masses, when they have been thus flattened out
like plates, are placed either on the stump of a tree, and cut into
pieces by pounding an iron chisel into them with a hammer, or else they
are cut with an iron tool similar to a pair of shears. One blade of
these shears is three feet long, and is firmly fixed in a stump, and the
other blade which cuts the metal is six feet long. These pieces of
metal are afterward heated in iron basins and smelted in the cupellation
furnace by the smelters.

[Illustration 270 (Spalling Ore): A--Tables. B--Upright planks.
C--Hammer. D--Quadrangular hammer. E--Deeper vessel. F--Shallower
vessel. G--Iron rod.]

Although the miners, in the shafts or tunnels, have sorted over the
material which they mine, still the ore which has been broken down and
carried out must be broken into pieces by a hammer or minutely crushed,
so that the more valuable and better parts can be distinguished from the
inferior and worthless portions. This is of the greatest importance in
smelting ore, for if the ore is smelted without this separation, the
valuable part frequently receives great damage before the worthless part
melts in the fire, or else the one consumes the other; this latter
difficulty can, however, be partly avoided by the exercise of care and
partly by the use of fluxes. Now, if a vein is of poor quality, the
better portions which have been broken down and carried out should be
thrown together in one place, and the inferior portion and the rock
thrown away. The sorters place a hard broad stone on a table; the tables
are generally four feet square and made of joined planks, and to the
edge of the sides and back are fixed upright planks, which rise about a
foot from the table; the front, where the sorter sits, is left open. The
lumps of ore, rich in gold or silver, are put by the sorters on the
stone and broken up with a broad, but not thick, hammer; they either
break them into pieces and throw them into one vessel, or they break and
sort--whence they get their name--the more precious from the worthless,
throwing and collecting them separately into different vessels. Other
men crush the lumps of ore less rich in gold or silver, which have
likewise been put on the stone, with a broad thick hammer, and when it
has been well crushed, they collect it and throw it into one vessel.
There are two kinds of vessels; one is deeper, and a little wider in the
centre than at the top or bottom; the other is not so deep though it is
broader at the bottom, and becomes gradually a little narrower toward
the top. The latter vessel is covered with a lid, while the former is
not covered; an iron rod through the handles, bent over on either end,
is grasped in the hand when the vessel is carried. But, above all, it
behooves the sorters to be assiduous in their labours.

[Illustration 271 (Spalling Ore): A--Pyrites. B--Leggings. C--Gloves.
D--Hammer.]

By another method of breaking ore with hammers, large hard fragments of
ore are broken before they are burned. The legs of the workmen--at all
events of those who crush pyrites in this manner with large hammers in
Goslar--are protected with coverings resembling leggings, and their
hands are protected with long gloves, to prevent them from being
injured by the chips which fly away from the fragments.

[Illustration 272 (Spalling Ore): A--Area paved with stones. B--Broken
ore. C--Area covered with broken ore. D--Iron tool. E--Its handle.
F--Broom. G--Short strake. H--Wooden hoe.]

In that district of Greater Germany which is called Westphalia and in
that district of Lower Germany which is named Eifel, the broken ore
which has been burned, is thrown by the workmen into a round area paved
with the hardest stones, and the fragments are pounded up with iron
tools, which are very much like hammers in shape and are used like
threshing sledges. This tool is a foot long, a palm wide, and a digit
thick, and has an opening in the middle just as hammers have, in which
is fixed a wooden handle of no great thickness, but up to three and a
half feet long, in order that the workmen can pound the ore with greater
force by reason of its weight falling from a greater height. They strike
and pound with the broad side of the tool, in the same way as corn is
pounded out on a threshing floor with the threshing sledges, although
the latter are made of wood and are smooth and fixed to poles. When the
ore has been broken into small pieces, they sweep it together with
brooms and remove it to the works, where it is washed in a short
strake, at the head of which stands the washer, who draws the water
upward with a wooden hoe. The water running down again, carries all the
light particles into a trough placed underneath. I shall deal more fully
with this method of washing a little later.

Ore is burned for two reasons; either that from being hard, it may
become soft and more easily broken and more readily crushed with a
hammer or stamps, and then can be smelted; or that the fatty things,
that is to say, sulphur, bitumen, orpiment, or realgar[3] may be
consumed. Sulphur is frequently found in metallic ores, and, generally
speaking, is more harmful to the metals, except gold, than are the other
things. It is most harmful of all to iron, and less to tin than to
bismuth, lead, silver, or copper. Since very rarely gold is found in
which there is not some silver, even gold ores containing sulphur ought
to be roasted before they are smelted, because, in a very vigorous
furnace fire, sulphur resolves metal into ashes and makes slag of it.
Bitumen acts in the same way, in fact sometimes it consumes silver,
which we may see in bituminous _cadmia_[4].

[Illustration 274 (Stall Roasting Ore): A--Area. B--Wood. C--Ore.
D--Cone-shaped piles. E--Canal.]

I now come to the methods of roasting, and first of all to that one
which is common to all ores. The earth is dug out to the required
extent, and thus is made a quadrangular area of fair size, open at the
front, and above this, firewood is laid close together, and on it other
wood is laid transversely, likewise close together, for which reason our
countrymen call this pile of wood a crate; this is repeated until the
pile attains a height of one or two cubits. Then there is placed upon it
a quantity of ore that has been broken into small pieces with a hammer;
first the largest of these pieces, next those of medium size, and lastly
the smallest, and thus is built up a gently sloping cone. To prevent it
from becoming scattered, fine sand of the same ore is soaked with water
and smeared over it and beaten on with shovels; some workers, if they
cannot obtain such fine sand, cover the pile with charcoal-dust, just as
do charcoal-burners. But at Goslar, the pile, when it has been built up
in the form of a cone, is smeared with _atramentum sutorium rubrum_[5],
which is made by the leaching of roasted pyrites soaked with water. In
some districts the ore is roasted once, in others twice, in others three
times, as its hardness may require. At Goslar, when pyrites is roasted
for the third time, that which is placed on the top of the pyre exudes a
certain greenish, dry, rough, thin substance, as I have elsewhere
written[6]; this is no more easily burned by the fire than is asbestos.
Very often also, water is put on to the ore which has been roasted,
while it is still hot, in order to make it softer and more easily
broken; for after fire has dried up the moisture in the ore, it breaks
up more easily while it is still hot, of which fact burnt limestone
affords the best example.

[Illustration 275 (Heap Roasting Ore): A--Lighted pyre. B--Pyre which is
being constructed. C--Ore. D--Wood. E--Pile of the same wood.]

By digging out the earth they make the areas much larger, and square;
walls should be built along the sides and back to hold the heat of the
fire more effectively, and the front should be left open. In these
compartments tin ore is roasted in the following manner. First of all
wood about twelve feet long should be laid in the area in four layers,
alternately straight and transverse. Then the larger pieces of ore
should be laid upon them, and on these again the smaller ones, which
should also be placed around the sides; the fine sand of the same ore
should also be spread over the pile and pounded with shovels, to prevent
the pile from falling before it has been roasted; the wood should then
be fired.

[Illustration 276 (Stall Roasting Ore): A--Burning pyre which is
composed of lead ore with wood placed above it. B--Workman throwing ore
into another area. C--Oven-shaped furnace. D--Openings through which the
smoke escapes.]

Lead ore, if roasting is necessary, should be piled in an area just like
the last, but sloping, and the wood should be placed over it. A tree
trunk should be laid right across the front of the ore to prevent it
from falling out. The ore, being roasted in this way, becomes partly
melted and resembles slag. Thuringian pyrites, in which there is gold,
sulphur, and vitriol, after the last particle of vitriol has been
obtained by heating it in water, is thrown into a furnace, in which logs
are placed. This furnace is very similar to an oven in shape, in order
that when the ore is roasted the valuable contents may not fly away with
the smoke, but may adhere to the roof of the furnace. In this way
sulphur very often hangs like icicles from the two openings of the roof
through which the smoke escapes.

[Illustration 277 (Hearths for roasting): A--Iron plates full of holes.
B--Walls. C--Plate on which ore is placed. D--Burning charcoal placed on
the ore. E--Pots. F--Furnace. G--Middle part of upper chamber. H--The
other two compartments. I--Divisions of the lower chamber. K--Middle
wall. L--Pots which are filled with ore. M--Lids of same pots.
N--Grating.]

If pyrites or _cadmia_, or any other ore containing metal, possesses a
good deal of sulphur or bitumen, it should be so roasted that neither is
lost. For this purpose it is thrown on an iron plate full of holes, and
roasted with charcoal placed on top; three walls support this plate, two
on the sides and the third at the back. Beneath the plate are placed
pots containing water, into which the sulphurous or bituminous vapour
descends, and in the water the fat accumulates and floats on the top. If
it is sulphur, it is generally of a yellow colour; if bitumen, it is
black like pitch. If these were not drawn out they would do much harm to
the metal, when the ore is being smelted. When they have thus been
separated they prove of some service to man, especially the sulphurous
kind. From the vapour which is carried down, not into the water, but
into the ground, there is created a sulphurous or a bituminous substance
resembling _pompholyx_[7], and so light that it can be blown away with a
breath. Some employ a vaulted furnace, open at the front and divided
into two chambers. A wall built in the middle of the furnace divides the
lower chamber into two equal parts, in which are set pots containing
water, as above described. The upper chamber is again divided into three
parts, the middle one of which is always open, for in it the wood is
placed, and it is not broader than the middle wall, of which it forms
the topmost portion. The other two compartments have iron doors which
are closed, and which, together with the roof, keep in the heat when the
wood is lighted. In these upper compartments are iron bars which take
the place of a floor, and on these are arranged pots without bottoms,
having in place of a bottom, a grating made of iron wire, fixed to each,
through the openings of which the sulphurous or bituminous vapours
roasted from the ore run into the lower pots. Each of the upper pots
holds a hundred pounds of ore; when they are filled they are covered
with lids and smeared with lute.

[Illustration 278 (Heap Roasting): A--Heap of cupriferous stones.
B--Kindled heap. C--Stones being taken to the beds of faggots.]

In Eisleben and the neighbourhood, when they roast the schistose stone
from which copper is smelted, and which is not free from bitumen, they
do not use piles of logs, but bundles of faggots. At one time, they used
to pile this kind of stone, when extracted from the pit, on bundles of
faggots and roast it by firing the faggots; nowadays, they first of all
carry these same stones to a heap, where they are left to lie for some
time in such a way as to allow the air and rain to soften them. Then
they make a bed of faggot bundles near the heap, and carry the nearest
stones to this bed; afterward they again place bundles of faggots in the
empty place from which the first stones have been removed, and pile over
this extended bed, the stones which lay nearest to the first lot; and
they do this right up to the end, until all the stones have been piled
mound-shape on a bed of faggots. Finally they fire the faggots, not,
however, on the side where the wind is blowing, but on the opposite
side, lest the fire blown up by the force of the wind should consume the
faggots before the stones are roasted and made soft; by this method the
stones which are adjacent to the faggots take fire and communicate it to
the next ones, and these again to the adjoining ones, and in this way
the heap very often burns continuously for thirty days or more. This
schist rock when rich in copper, as I have said elsewhere, exudes a
substance of a nature similar to asbestos.

[Illustration 284 (Stamp-mill): A--Mortar. B--Upright posts.
C--Cross-beams. D--Stamps. E--Their heads. F--Axle (cam-shaft). G--Tooth
of the stamp (tappet). H--Teeth of axle (cams).]

Ore is crushed with iron-shod stamps, in order that the metal may be
separated from the stone and the hangingwall rock.[8] The machines which
miners use for this purpose are of four kinds, and are made by the
following method. A block of oak timber six feet long, two feet and a
palm square, is laid on the ground. In the middle of this is fixed a
mortar-box, two feet and six digits long, one foot and six digits deep;
the front, which might be called a mouth, lies open; the bottom is
covered with a plate of iron, a palm thick and two palms and as many
digits wide, each end of which is wedged into the timber with broad
wedges, and the front and back part of it are fixed to the timber with
iron nails. To the sides of the mortar above the block are fixed two
upright posts, whose upper ends are somewhat cut back and are mortised
to the timbers of the building. Two and a half feet above the mortar
are placed two cross-beams joined together, one in front and one in the
back, the ends of which are mortised into the upright posts already
mentioned. Through each mortise is bored a hole, into which is driven an
iron clavis; one end of the clavis has two horns, and the other end is
perforated in order that a wedge driven through, binds the beams more
firmly; one horn of the clavis turns up and the other down. Three and a
half feet above the cross-beams, two other cross-beams of the same kind
are again joined in a similar manner; these cross-beams have square
openings, in which the iron-shod stamps are inserted. The stamps are not
far distant from each other, and fit closely in the cross-beams. Each
stamp has a tappet at the back, which requires to be daubed with grease
on the lower side that it can be raised more easily. For each stamp
there are on a cam-shaft, two cams, rounded on the outer end, which
alternately raise the stamp, in order that, by its dropping into the
mortar, it may with its iron head pound and crush the rock which has
been thrown under it. To the cam-shaft is fixed a water-wheel whose
buckets are turned by water-power. Instead of doors, the mouth of the
mortar has a board, which is fitted into notches cut out of the front of
the block. This board can be raised, in order that when the mouth is
open, the workmen can remove with a shovel the fine sand, and likewise
the coarse sand and broken rock, into which the rocks have been crushed;
this board can be lowered, so that the mouth thus being closed, the
fresh rock thrown in may be crushed with the iron-shod stamps. If an oak
block is not available, two timbers are placed on the ground and joined
together with iron clamps, each of the timbers being six feet long, a
foot wide, and a foot and a half thick. Such depth as should be allowed
to the mortar, is obtained by cutting out the first beam to a width of
three-quarters of a foot and to a length of two and a third and one
twenty-fourth of a foot. In the bottom of the part thus dug out, there
should be laid a very hard rock, a foot thick and three-quarters of a
foot wide; about it, if any space remains, earth or sand should be
filled in and pounded. On the front, this bed rock is covered with a
plank; this rock when it has been broken, should be taken away and
replaced by another. A smaller mortar having room for only three stamps
may also be made in the same manner.

[Illustration 285 (Stamps): A--Stamp. B--Stem cut out in lower part.
C--Shoe. D--The other shoe, barbed and grooved. E--Quadrangular iron
band. F--Wedge. G--Tappet. H--Angular cam-shaft. I--Cams. K--Pair of
compasses.]

The stamp-stems are made of small square timbers nine feet long and half
a foot wide each way. The iron head of each is made in the following
way; the lower part of the head is three palms long and the upper part
the same length. The lower part is a palm square in the middle for two
palms, then below this, for a length of two digits it gradually spreads
until it becomes five digits square; above the middle part, for a length
of two digits, it again gradually swells out until it becomes a palm and
a half square. Higher up, where the head of the shoe is enclosed in the
stem, it is bored through and similarly the stem itself is pierced, and
through the opening of each, there passes a broad iron wedge, which
prevents the head falling off the stem. To prevent the stamp head from
becoming broken by the constant striking of fragments of ore or rocks,
there is placed around it a quadrangular iron band a digit thick, seven
digits wide, and six digits deep. Those who use three stamps, as is
common, make them much larger, and they are made square and three palms
broad each way; then the iron shoe of each has a total length of two
feet and a palm; at the lower end, it is hexagonal, and at that point it
is seven digits wide and thick. The lower part of it which projects
beyond the stem is one foot and two palms long; the upper part, which is
enclosed in the stem, is three palms long; the lower part is a palm
wide and thick; then gradually the upper part becomes narrower and
thinner, so that at the top it is three digits and a half wide and two
thick. It is bored through at the place where the angles have been
somewhat cut away; the hole is three digits long and one wide, and is
one digit's distance from the top. There are some who make that part of
the head which is enclosed in the stem, barbed and grooved, in order
that when the hooks have been fixed into the stem and wedges fitted to
the grooves, it may remain tightly fixed, especially when it is also
held with two quadrangular iron bands. Some divide the cam-shaft with a
compass into six sides, others into nine; it is better for it to be
divided into twelve sides, in order that successively one side may
contain a cam and the next be without one.

[Illustration 286 (Stamp-mill): A--Box. Although the upper part is not
open, it is shown open here, that the wheel may be seen. B--Wheel.
C--Cam-shaft. D--Stamps.]

The water-wheel is entirely enclosed under a quadrangular box, in case
either the deep snows or ice in winter, or storms, may impede its
running and its turning around. The joints in the planks are stopped all
around with moss. The cover, however, has one opening, through which
there passes a race bringing down water which, dropping on the buckets
of the wheel, turns it round, and flows out again in the lower race
under the box. The spokes of the water-wheel are not infrequently
mortised into the middle of the cam-shaft; in this case the cams on
both sides raise the stamps, which either both crush dry or wet ore, or
else the one set crushes dry ore and the other set wet ore, just as
circumstances require the one or the other; further, when the one set is
raised and the iron clavises in them are fixed into openings in the
first cross-beam, the other set alone crushes the ore.

[Illustration 287 (Handling stamped material): A--Box laid flat on the
ground. B--Its bottom which is made of iron wire. C--Box inverted.
D--Iron rods. E--Box suspended from a beam, the inside being visible.
F--Box suspended from a beam, the outside being visible.]

Broken rock or stones, or the coarse or fine sand, are removed from the
mortar of this machine and heaped up, as is also done with the same
materials when raked out of the dump near the mine. They are thrown by a
workman into a box, which is open on the top and the front, and is three
feet long and nearly a foot and a half wide. Its sides are sloping and
made of planks, but its bottom is made of iron wire netting, and
fastened with wire to two iron rods, which are fixed to the two side
planks. This bottom has openings, through which broken rock of the size
of a hazel nut cannot pass; the pieces which are too large to pass
through are removed by the workman, who again places them under stamps,
while those which have passed through, together with the coarse and fine
sand, he collects in a large vessel and keeps for the washing. When he
is performing his laborious task he suspends the box from a beam by two
ropes. This box may rightly be called a quadrangular sieve, as may also
that kind which follows.

[Illustration 288 (Sifting Ore): A--Sieve. B--Small planks. C--Post.
D--Bottom of sieve. E--Open box. F--Small cross-beam. G--Upright posts.]

Some employ a sieve shaped like a wooden bucket, bound with two iron
hoops; its bottom, like that of the box, is made of iron wire netting.
They place this on two small cross-planks fixed upon a post set in the
ground. Some do not fix the post in the ground, but stand it on the
ground until there arises a heap of the material which has passed
through the sieve, and in this the post is fixed. With an iron shovel
the workman throws into this sieve broken rock, small stones, coarse and
fine sand raked out of the dump; holding the handles of the sieve in his
hands, he agitates it up and down in order that by this movement the
dust, fine and coarse sand, small stones, and fine broken rock may fall
through the bottom. Others do not use a sieve, but an open box, whose
bottom is likewise covered with wire netting; this they fix on a small
cross-beam fastened to two upright beams and tilt it backward and
forward.

[Illustration 289 (Sifting Ore): A--Box. B--Bale. C--Rope. D--Beam.
E--Handles. F--Five-toothed rake. G--Sieve. H--Its handles. I--Pole.
K--Rope. L--Timber.]

Some use a sieve made of copper, having square copper handles on both
sides, and through these handles runs a pole, of which one end projects
three-quarters of a foot beyond one handle; the workman then places that
end in a rope which is suspended from a beam, and rapidly shakes the
pole alternately backward and forward. By this movement the small
particles fall through the bottom of the sieve. In order that the end of
the pole may be easily placed in the rope, a stick, two palms long,
holds open the lower part of the rope as it hangs double, each end of
the rope being tied to the beam; part of the rope, however, hangs beyond
the stick to a length of half a foot. A large box is also used for this
purpose, of which the bottom is either made of a plank full of holes or
of iron netting, as are the other boxes. An iron bale is fastened from
the middle of the planks which form its sides; to this bale is fastened
a rope which is suspended from a wooden beam, in order that the box may
be moved or tilted in any direction. There are two handles on each end,
not unlike the handles of a wheelbarrow; these are held by two workmen,
who shake the box to and fro. This box is the one principally used by
the Germans who dwell in the Carpathian mountains. The smaller particles
are separated from the larger ones by means of three boxes and two
sieves, in order that those which pass through each, being of equal
size, may be washed together; for the bottoms of both the boxes and
sieves have openings which do not let through broken rock of the size of
a hazel nut. As for the dry remnants in the bottoms of the sieves, if
they contain any metal the miners put them under the stamps. The larger
pieces of broken rock are not separated from the smaller by this method
until the men and boys, with five-toothed rakes, have separated them
from the rock fragments, the little stones, the coarse and the fine sand
and earth, which have been thrown on to the dumps.

[Illustration 291 (Sifting Ore): A--Workman carrying broken rock in a
barrow. B--First chute. C--First box. D--Its handles. E--Its bales.
F--Rope. G--Beam. H--Post. I--Second chute. K--Second box. L--Third
chute. M--Third box. N--First table. O--First sieve. P--First tub.
Q--Second table. R--Second sieve. S--Second tub. T--Third table.
V--Third sieve. X--Third tub. Y--Plugs.]

At Neusohl, in the Carpathians, there are mines where the veins of
copper lie in the ridges and peaks of the mountains, and in order to
save expense being incurred by a long and difficult transport, along a
rough and sometimes very precipitous road, one workman sorts over the
dumps which have been thrown out from the mines, and another carries in
a wheelbarrow the earth, fine and coarse sand, little stones, broken
rock, and even the poorer ore, and overturns the barrow into a long open
chute fixed to a steep rock. This chute is held apart by small cleats,
and the material slides down a distance of about one hundred and fifty
feet into a short box, whose bottom is made of a thick copper plate,
full of holes. This box has two handles by which it is shaken to and
fro, and at the top there are two bales made of hazel sticks, in which
is fixed the iron hook of a rope hung from the branch of a tree or from
a wooden beam which projects from an upright post. From time to time a
sifter pulls this box and thrusts it violently against the tree or post,
by which means the small particles passing through its holes descend
down another chute into another short box, in whose bottom there are
smaller holes. A second sifter, in like manner, thrusts this box
violently against a tree or post, and a second time the smaller
particles are received into a third chute, and slide down into a third
box, whose bottom has still smaller holes. A third sifter, in like
manner, thrusts this box violently against a tree or post, and for the
third time the tiny particles fall through the holes upon a table. While
the workman is bringing in the barrow, another load which has been
sorted from the dump, each sifter withdraws the hooks from his bale and
carries away his own box and overturns it, heaping up the broken rock or
sand which remains in the bottom of it. As for the tiny particles which
have slid down upon the table, the first washer--for there are as many
washers as sifters--sweeps them off and in a tub nearly full of water,
washes them through a sieve whose holes are smaller than the holes of
the third box. When this tub has been filled with the material which has
passed through the sieve, he draws out the plug to let the water run
away; then he removes with a shovel that which has settled in the tub
and throws it upon the table of a second washer, who washes it in a
sieve with smaller holes. The sediment which has this time settled in
his tub, he takes out and throws on the table of a third washer, who
washes it in a sieve with the smallest holes. The copper concentrates
which have settled in the last tub are taken out and smelted; the
sediment which each washer has removed with a limp is washed on a canvas
strake. The sifters at Altenberg, in the tin mines of the mountains
bordering on Bohemia, use such boxes as I have described, hung from
wooden beams. These, however, are a little larger and open in the front,
through which opening the broken rock which has not gone through the
sieve can be shaken out immediately by thrusting the sieve against its
post.

[Illustration 292 (Sifting Ore): A--Sieve. B--Its handles. C--Tub.
D--Bottom of sieve made of iron wires. E--Hoop. F--Rods. G--Hoops.
H--Woman shaking the sieve. I--Boy supplying it with material which
requires washing. K--Man with shovel removing from the tub the material
which has passed through the sieve.]

If the ore is rich in metal, the earth, the fine and coarse sand, and
the pieces of rock which have been broken from the hangingwall, are dug
out of the dump with a spade or rake and, with a shovel, are thrown into
a large sieve or basket, and washed in a tub nearly full of water. The
sieve is generally a cubit broad and half a foot deep; its bottom has
holes of such size that the larger pieces of broken rock cannot pass
through them, for this material rests upon the straight and cross iron
wires, which at their points of contact are bound by small iron clips.
The sieve is held together by an iron band and by two cross-rods
likewise of iron; the rest of the sieve is made of staves in the shape
of a little tub, and is bound with two iron hoops; some, however, bind
it with hoops of hazel or oak, but in that case they use three of them.
On each side it has handles, which are held in the hands by whoever
washes the metalliferous material. Into this sieve a boy throws the
material to be washed, and a woman shakes it up and down, turning it
alternately to the right and to the left, and in this way passes
through it the smaller pieces of earth, sand, and broken rock. The
larger pieces remain in the sieve, and these are taken out, placed in a
heap and put under the stamps. The mud, together with fine sand, coarse
sand, and broken rock, which remain after the water has been drawn out
of the tub, is removed by an iron shovel and washed in the sluice, about
which I will speak a little later.

[Illustration 293 (Sifting Ore): A--Basket. B--Its handles. C--Dish.
D--Its back part. E--Its front part. F--Handles of same.]

The Bohemians use a basket a foot and a half broad and half a foot deep,
bound together by osiers. It has two handles by which it is grasped,
when they move it about and shake it in the tub or in a small pool
nearly full of water. All that passes through it into the tub or pool
they take out and wash in a bowl, which is higher in the back part and
lower and flat in the front; it is grasped by the two handles and shaken
in the water, the lighter particles flowing away, and the heavier and
mineral portion sinking to the bottom.

[Illustration 294 (Mills for Grinding Ore): A--Axle. B--Water-wheel.
C--Toothed drum. D--Drum made of rundles. E--Iron axle. F--Millstone.
G--Hopper. H--Round wooden plate. I--Trough.]

Gold ore, after being broken with hammers or crushed by the stamps, and
even tin ore, is further milled to powder. The upper millstone, which
is turned by water-power, is made in the following way. An axle is
rounded to compass measure, or is made angular, and its iron pinions
turn in iron sockets which are held in beams. The axle is turned by a
water-wheel, the buckets of which are fixed to the rim and are struck by
the force of a stream. Into the axle is mortised a toothed drum, whose
teeth are fixed in the side of the rim. These teeth turn a second drum
of rundles, which are made of very hard material. This drum surrounds an
iron axle which has a pinion at the bottom and revolves in an iron cup
in a timber. At the top of the iron axle is an iron tongue, dove-tailed
into the millstone, and so when the teeth of the one drum turn the
rundles of the other, the millstone is made to turn round. An
overhanging machine supplies it with ore through a hopper, and the ore,
being ground to powder, is discharged from a round wooden plate into a
trough and flowing away through it accumulates on the floor; from there
the ore is carried away and reserved for washing. Since this method of
grinding requires the millstone to be now raised and now lowered, the
timber in whose socket the iron of the pinion axle revolves, rests upon
two beams, which can be raised and lowered.

[Illustration 296 (Mills for Grinding Ore): A--First mill. B--Wheel
turned by goats. C--Second mill. D--Disc of upright axle. E--Its toothed
drum. F--Third mill. G--Shape of lower millstone. H--Small upright axle
of the same. I--Its opening. K--Lever of the upper millstone. L--Its
opening.]

There are three mills in use in milling gold ores, especially for
quartz[11] which is not lacking in metal. They are not all turned by
water-power, but some by the strength of men, and two of them even by
the power of beasts of burden. The first revolving one differs from the
next only in its driving wheel, which is closed in and turned by men
treading it, or by horses, which are placed inside, or by asses, or even
by strong goats; the eyes of these beasts are covered by linen bands.
The second mill, both when pushed and turned round, differs from the two
above by having an upright axle in the place of the horizontal one; this
axle has at its lower end a disc, which two workmen turn by treading
back its cleats with their feet, though frequently one man sustains all
the labour; or sometimes there projects from the axle a pole which is
turned by a horse or an ass, for which reason it is called an
_asinaria_. The toothed drum which is at the upper end of the axle turns
the drum which is made of rundles, and together with it the millstone.

The third mill is turned round and round, and not pushed by hand; but
between this and the others there is a great distinction, for the lower
millstone is so shaped at the top that it can hold within it the upper
millstone, which revolves around an iron axle; this axle is fastened in
the centre of the lower stone and passes through the upper stone. A
workman, by grasping in his hand an upright iron bar placed in the upper
millstone, moves it round. The middle of the upper millstone is bored
through, and the ore, being thrown into this opening, falls down upon
the lower millstone and is there ground to powder, which gradually runs
out through its opening; it is washed by various methods before it is
mixed with quicksilver, which I will explain presently.

[Illustration 299 (Stamp-mill): A--Water-wheel. B--Axle. C--Stamp.
D--Hopper in the upper millstone. E--Opening passing through the centre.
F--Lower millstone. G--Its round depression. H--Its outlet. I--Iron
axle. K--Its crosspiece. L--Beam. M--Drum of rundles on the iron axle.
N--Toothed drum of main axle. O--Tubs. P--The small planks. Q--Small
upright axles. R--Enlarged part of one. S--Their paddles. T--Their drums
which are made of rundles. V--Small horizontal axle set into the end of
the main axle. X--Its toothed drums. Y--Three sluices. Z--Their small
axles. AA--Spokes. BB--Paddles.]

Some people build a machine which at one and the same time can crush,
grind, cleanse, and wash the gold ore, and mix the gold with
quicksilver. This machine has one water-wheel, which is turned by a
stream striking its buckets; the main axle on one side of the
water-wheel has long cams, which raise the stamps that crush the dry
ore. Then the crushed ore is thrown into the hopper of the upper
millstone, and gradually falling through the opening, is ground to
powder. The lower millstone is square, but has a round depression in
which the round, upper millstone turns, and it has an outlet from which
the powder falls into the first tub. A vertical iron axle is dove-tailed
into a cross-piece, which is in turn fixed into the upper millstone; the
upper pinion of this axle is held in a bearing fixed in a beam; the drum
of the vertical axle is made of rundles, and is turned by the toothed
drum on the main axle, and thus turns the millstone. The powder falls
continually into the first tub, together with water, and from there runs
into a second tub which is set lower down, and out of the second into a
third, which is the lowest; from the third, it generally flows into a
small trough hewn out of a tree trunk. Quicksilver[12] is placed in
each tub, across which is fixed a small plank, and through a hole in the
middle of each plank there passes a small upright axle, which is
enlarged above the plank to prevent it from dropping into the tub lower
than it should. At the lower end of the axle three sets of paddles
intersect, each made from two little boards fixed to the axle opposite
each other. The upper end of this axle has a pinion held by a bearing
set in a beam, and around each of these axles is a small drum made of
rundles, each of which is turned by a small toothed drum on a horizontal
axle, one end of which is mortised into the large horizontal axle, and
the other end is held in a hollow covered with thick iron plates in a
beam. Thus the paddles, of which there are three sets in each tub, turn
round, and agitating the powder, thoroughly mix it with water and
separate the minute particles of gold from it, and these are attracted
by the quicksilver and purified. The water carries away the waste. The
quicksilver is poured into a bag made of leather or cloth woven from
cotton, and when this bag is squeezed, as I have described elsewhere,
the quicksilver drips through it into a jar placed underneath. The pure
gold[13] remains in the bag. Some people substitute three broad sluices
for the tubs, each of which has an angular axle on which are set six
narrow spokes, and to them are fixed the same number of broad paddles;
the water that is poured in strikes these paddles and turns them round,
and they agitate the powder which is mixed with the water and separate
the metal from it. If the powder which is being treated contains gold
particles, the first method of washing is far superior, because the
quicksilver in the tubs immediately attracts the gold; if it is powder
in which are the small black stones from which tin is smelted, this
latter method is not to be despised. It is very advantageous to place
interlaced fir boughs in the sluices in which such tin-stuff is washed,
after it has run through the launders from the mills, because the fine
tin-stone is either held back by the twigs, or if the current carries
them along they fall away from the water and settle down.

Seven methods of washing are in common use for the ores of many metals;
for they are washed either in a simple buddle, or in a divided buddle,
or in an ordinary strake, or in a large tank, or in a short strake, or
in a canvas strake, or in a jigging sieve. Other methods of washing are
either peculiar to some particular metal, or are combined with the
method of crushing wet ore by stamps.

[Illustration 301 (Buddles): A--Head of buddle. B--Pipe. C--Buddle.
D--Board. E--Transverse buddle. F--Shovel. G--Scrubber.]

A simple buddle is made in the following way. In the first place, the
head is higher than the rest of the buddle, and is three feet long and a
foot and a half broad; this head is made of planks laid upon a timber
and fastened, and on both sides, side-boards are set up so as to hold
the water, which flows in through a pipe or trough, so that it shall
fall straight down. The middle of the head is somewhat depressed in
order that the broken rock and the larger metallic particles may settle
into it. The buddle is sunk into the earth to a depth of three-quarters
of a foot below the head, and is twelve feet long and a foot and a half
wide and deep; the bottom and each side are lined with planks to prevent
the earth, when it is softened by the water, from falling in or from
absorbing the metallic particles. The lower end of the buddle is
obstructed by a board, which is not as high as the sides. To this
straight buddle there is joined a second transverse buddle, six feet
long and a foot and a half wide and deep, similarly lined with planks;
at the lower end it is closed up with a board, also lower than the
sides of the buddle so that the water can flow away; this water falls
into a launder and is carried outside the building. In this simple
buddle is washed the metallic material which has passed on to the floor
of the works through the five large sieves. When this has been gathered
into a heap, the washer throws it into the head of the buddle, and water
is poured upon it through the pipe or small trough, and the portion
which sinks and settles in the middle of the head compartment he stirs
with a wooden scrubber,--this is what we will henceforth call the
implement made of a stick to which is fixed a piece of wood a foot long
and a palm broad. The water is made turbid by this stirring, and carries
the mud and sand and small particles of metal into the buddle below.
Together with the broken rock, the larger metallic particles remain in
the head compartment, and when these have been removed, boys throw them
upon the platform of a washing tank or the short strake, and separate
them from the broken rock. When the buddle is full of mud and sand, the
washer closes the pipe through which the water flows into the head; very
soon the water which remains in the buddle flows away, and when this has
taken place, he removes with a shovel the mud and sand which are mixed
with minute particles of metal, and washes them on a canvas strake.
Sometimes before the buddles have been filled full, the boys throw the
material into a bowl and carry it to the strakes and wash it.

Pulverized ore is washed in the head of this kind of a buddle; but
usually when tin-stone is washed in it, interlacing fir boughs are put
into the buddle, in the same manner as in the sluice when wet ore is
crushed with stamps. The larger tin-stone particles, which sink in the
upper part of the buddle, are washed separately in a strake; those
particles which are of medium size, and settle in the middle part, are
washed separately in the same way; and the mud mixed with minute
particles of tin-stone, which has settled in the lowest part of the
buddle below the fir boughs, is washed separately on the canvas strakes.

[Illustration 302 (Buddles): A--Pipe. B--Cross launder. C--Small
troughs. D--Head of the buddle. E--Wooden scrubber. F--Dividing boards.
G--Short strake.]

The divided buddle differs from the last one by having several
cross-boards, which, being placed inside it, divide it off like steps;
if the buddle is twelve feet long, four of them are placed within; if
nine feet long, three. The nearer each one is to the head, the greater
is its height; the further from the head, the lower it is; and so when
the highest is a foot and a palm high, the second is usually a foot and
three digits high, the third a foot and two digits, and the lowest a
foot and one digit. In this buddle is generally washed that
metalliferous material which has been sifted through the large sieve
into the tub containing water. This material is continuously thrown with
an iron shovel into the head of the buddle, and the water which has been
let in is stirred up by a wooden scrubber, until the buddle is full,
then the cross-boards are taken out by the washer, and the water is
drained off; next the metalliferous material which has settled in the
compartments is again washed, either on a short strake or on the canvas
strakes or in the jigging sieves. Since a short strake is often united
with the upper part of this buddle, a pipe in the first place carries
the water into a cross launder, from which it flows down through one
little launder into the buddle, and through another into the short
strake.

[Illustration 303 (Washing material): A--Head. B--Strake. C--Trowel.
D--Scrubber. E--Canvas. F--Rod by which the canvas is made smooth.]

An ordinary strake, so far as the planks are concerned, is not unlike
the last two. The head of this, as of the others, is first made of earth
stamped down, then covered with planks; and where it is necessary, earth
is thrown in and beaten down a second time, so that no crevice may
remain through which water carrying the particles of metal can escape.
The water ought to fall straight down into the strake, which has a
length of eight feet and a breadth of a foot and a half; it is
connected with a transverse launder, which then extends to a settling
pit outside the building. A boy with a shovel or a ladle takes the
impure concentrates or impure tin-stone from a heap, and throws them
into the head of the strake or spreads them over it. A washer with a
wooden scrubber then agitates them in the strake, whereby the mud mixed
with water flows away into the transverse launder, and the concentrates
or the tin-stone settle on the strake. Since sometimes the concentrates
or fine tin-stone flow down together with the mud into the transverse
launder, a second washer closes it, after a distance of about six feet,
with a cross-board and frequently stirs the mud with a shovel, in order
that when mixed with water it may flow out into the settling-pit; and
there remains in the launder only the concentrates or tin-stone. The
tin-stuff of Schlackenwald and Erbisdorff is washed in this kind of a
strake once or twice; those of Altenberg three or four times; those of
Geyer often seven times; for in the ore at Schlackenwald and Erbisdorff
the tin-stone particles are of a fair size, and are crushed with stamps;
at Altenberg they are of much smaller size, and in the broken ore at
Geyer only a few particles of tin-stone can be seen occasionally.

This method of washing was first devised by the miners who treated tin
ore, whence it passed on from the works of the tin workers to those of
the silver workers and others; this system is even more reliable than
washing in jigging-sieves. Near this ordinary strake there is generally
a canvas strake.

[Illustration 305 (Washing material): A--Upper cross launder. B--Small
launders. C--Heads of strakes. D--Strakes. E--Lower transverse launder.
F--Settling pit. G--Socket in the sill. H--Halved iron rings fixed to
beam. I--Pole. K--Its little scrubber. L--Second small scrubber.]

In modern times two ordinary strakes, similarly made, are generally
joined together; the head of one is three feet distant from that of the
other, while the bodies are four feet distant from each other, and there
is only one cross launder under the two strakes. One boy shovels, from
the heap into the head of each, the concentrates or tin-stone mixed with
mud. There are two washers, one of whom sits at the right side of one
strake, and the other at the left of the other strake, and each pursues
his task, using the following sort of implement. Under each strake is a
sill, from a socket in which a round pole rises, and is held by half an
iron ring in a beam of the building, so that it may revolve; this pole
is nine feet long and a palm thick. Penetrating the pole is a small
round piece of wood, three palms long and as many digits thick, to which
is affixed a small board two feet long and five digits wide, in an
opening of which one end of a small axle revolves, and to this axle is
fixed the handle of a little scrubber. The other end of this axle turns
in an opening of a second board, which is likewise fixed to a small
round piece of wood; this round piece, like the first one, is three
palms long and as many digits thick, and is used by the washer as a
handle. The little scrubber is made of a stick three feet long, to the
end of which is fixed a small tablet of wood a foot long, six digits
broad, and a digit and a half thick. The washer constantly moves the
handle of this implement with one hand; in this way the little scrubber
stirs the concentrates or the fine tin-stone mixed with mud in the head
of the strake, and the mud, on being stirred, flows on to the strake. In
the other hand he holds a second little scrubber, which has a handle
of half the length, and with this he ceaselessly stirs the concentrates
or tin-stone which have settled in the upper part of the strake; in this
way the mud and water flow down into the transverse launder, and from it
into the settling-pit which is outside the building.

[Illustration 306 (Washing material): A--Trough. B--Platform. C--Wooden
scrubber.]

Before the short strake and the jigging-sieve had been invented,
metalliferous ores, especially tin, were crushed dry with stamps and
washed in a large trough hollowed out of one or two tree trunks; and at
the head of this trough was a platform, on which the ore was thrown
after being completely crushed. The washer pulled it down into the
trough with a wooden scrubber which had a long handle, and when the
water had been let into the trough, he stirred the ore with the same
scrubber.

[Illustration 307 (Washing material): A--Short strake. B--Small launder.
C--Transverse launder. D--Wooden scrubber.]

The short strake is narrow in the upper part where the water flows down
into it through the little launder; in fact it is only two feet wide; at
the lower end it is wider, being three feet and as many palms. At the
sides, which are six feet long, are fixed boards two palms high. In
other respects the head resembles the head of the simple buddle, except
that it is not depressed in the middle. Beneath is a cross launder
closed by a low board. In this short strake not only is ore agitated and
washed with a wooden scrubber, but boys also separate the concentrates
from the broken rock in them and collect them in tubs. The short strake
is now rarely employed by miners, owing to the carelessness of the boys,
which has been frequently detected; for this reason, the jigging-sieve
has taken its place. The mud which settles in the launder, if the ore is
rich, is taken up and washed in a jigging-sieve or on a canvas strake.

[Illustration 308 (Washing material): A--Beams. B--Canvas. C--Head of
strake. D--Small launder. E--Settling pit or tank. F--Wooden scrubber.
G--Tubs.]

A canvas strake is made in the following way. Two beams, eighteen feet
long and half a foot broad and three palms thick, are placed on a slope;
one half of each of these beams is partially cut away lengthwise, to
allow the ends of planks to be fastened in them, for the bottom is
covered by planks three feet long, set crosswise and laid close
together. One half of each supporting beam is left intact and rises a
palm above the planks, in order that the water that is running down may
not escape at the sides, but shall flow straight down. The head of the
strake is higher than the rest of the body, and slopes so as to enable
the water to flow away. The whole strake is covered by six stretched
pieces of canvas, smoothed with a stick. The first of them occupies the
lowest division, and the second is so laid as to slightly overlap it; on
the second division, the third is similarly laid, and so on, one on the
other. If they are laid in the opposite way, the water flowing down
carries the concentrates or particles of tin-stone under the canvas, and
a useless task is attempted. Boys or men throw the concentrates or
tin-stuff mixed with mud into the head of the strake, after the canvas
has been thus stretched, and having opened the small launder they let
the water flow in; then they stir the concentrates or tin-stone with a
wooden scrubber till the water carries them all on to the canvas; next
they gently sweep the linen with the wooden scrubber until the mud flows
into the settling-pit or into the transverse launder. As soon as there
is little or no mud on the canvas, but only concentrates or tin-stone,
they carry the canvas away and wash it in a tub placed close by. The
tin-stone settles in the tub, and the men return immediately to the same
task. Finally, they pour the water out of the tub, and collect the
concentrates or tin-stone. However, if either concentrates or tin-stone
have washed down from the canvas and settled in the settling-pit or in
the transverse launder, they wash the mud again.

[Illustration 309 (Collecting concentrates): A--Canvas strake. B--Man
dashing water on the canvas. C--Bucket. D--Bucket of another kind.
E--Man removing concentrates or tin-stone from the trough.]

Some neither remove the canvas nor wash it in the tubs, but place over
it on each edge narrow strips, of no great thickness, and fix them to
the beams with nails. They agitate the metalliferous material with
wooden scrubbers and wash it in a similar way. As soon as little or no
mud remains on the canvas, but only concentrates or fine tin-stone, they
lift one beam so that the whole strake rests on the other, and dash it
with water, which has been drawn with buckets out of the small tank, and
in this way all the sediment which clings to the canvas falls into the
trough placed underneath. This trough is hewn out of a tree and placed
in a ditch dug in the ground; the interior of the trough is a foot wide
at the top, but narrower in the bottom, because it is rounded out. In
the middle of this trough they put a cross-board, in order that the
fairly large particles of concentrates or fairly large-sized tin-stone
may remain in the forepart into which they have fallen, and the fine
concentrates or fine tin-stone in the lower part, for the water flows
from one into the other, and at last flows down through an opening into
the pit. As for the fairly large-sized concentrates or tin-stone which
have been removed from the trough, they are washed again on the ordinary
strake. The fine concentrates and fine tin-stone are washed again on
this canvas strake. By this method, the canvas lasts longer because it
remains fixed, and nearly double the work is done by one washer as
quickly as can be done by two washers by the other method.

[Illustration 311 (Jigging Sieve): A--Fine sieves. B--Limp. C--Finer
sieve. D--Finest sieve.]

The jigging sieve has recently come into use by miners. The
metalliferous material is thrown into it and sifted in a tub nearly full
of water. The sieve is shaken up and down, and by this movement all the
material below the size of a pea passes through into the tub, and the
rest remains on the bottom of the sieve. This residue is of two kinds,
the metallic particles, which occupy the lower place, and the particles
of rock and earth, which take the higher place, because the heavy
substance always settles, and the light is borne upward by the force of
the water. This light material is taken away with a limp, which is a
thin tablet of wood almost semicircular in shape, three-quarters of a
foot long, and half a foot wide. Before the lighter portion is taken
away the contents of the sieve are generally divided crosswise with a
limp, to enable the water to penetrate into it more quickly. Afterward
fresh material is again thrown into the sieve and shaken up and down,
and when a great quantity of metallic particles have settled in the
sieve, they are taken out and put into a tray close by. But since there
fall into the tub with the mud, not only particles of gold or silver,
but also of sand, pyrites, _cadmia_, galena, quartz, and other
substances, and since the water cannot separate these from the metallic
particles because they are all heavy, this muddy mixture is washed a
second time, and the part which is useless is thrown away. To prevent
the sieve passing this sand again too quickly, the washer lays small
stones or gravel in the bottom of the sieve. However, if the sieve is
not shaken straight up and down, but is tilted to one side, the small
stones or broken ore move from one part to another, and the metallic
material again falls into the tub, and the operation is frustrated. The
miners of our country have made an even finer sieve, which does not fail
even with unskilled washers; in washing with this sieve they have no
need for the bottom to be strewn with small stones. By this method the
mud settles in the tub with the very fine metallic particles, and the
larger sizes of metal remain in the sieve and are covered with the
valueless sand, and this is taken away with a limp. The concentrates
which have been collected are smelted together with other things. The
mud mixed with the very fine metallic particles is washed for a third
time and in the finest sieve, whose bottom is woven of hair. If the ore
is rich in metal, all the material which has been removed by the limp is
washed on the canvas strakes, or if the ore is poor it is thrown away.

I have explained the methods of washing which are used in common for the
ores of many metals. I now come to another method of crushing ore, for I
ought to speak of this before describing those methods of washing which
are peculiar to ores of particular metals.

[Illustration 313 (Stamp-mill): A--Mortar. B--Open end of mortar.
C--Slab of rock. D--Iron sole plates. E--Screen. F--Launder. G--Wooden
shovel. H--Settling pit. I--Iron shovel. K--Heap of material which has
settled. L--Ore which requires crushing. M--Small launder.]

In the year 1512, George, the illustrious Duke of Saxony[14], gave the
overlordship of all the dumps ejected from the mines in Meissen to the
noble and wise Sigismund Maltitz, father of John, Bishop of Meissen.
Rejecting the dry stamps, the large sieve, and the stone mills of
Dippoldswalde and Altenberg, in which places are dug the small black
stones from which tin is smelted, he invented a machine which could
crush the ore wet under iron-shod stamps. That is called "wet ore" which
is softened by water which flows into the mortar box, and they are
sometimes called "wet stamps" because they are drenched by the same
water; and on the other hand, the other kinds are called "dry stamps" or
"dry ore," because no water is used to soften the ore when the stamps
are crushing. But to return to our subject. This machine is not
dissimilar to the one which crushes the ore with dry iron-shod stamps,
but the heads of the wet stamps are larger by half than the heads of the
others. The mortar-box, which is made of oak or beech timber, is set up
in the space between the upright posts; it does not open in front, but
at one end, and it is three feet long, three-quarters of a foot wide,
and one foot and six digits deep. If it has no bottom, it is set up in
the same way over a slab of hard, smooth rock placed in the ground,
which has been dug down a little. The joints are stopped up all round
with moss or cloth rags. If the mortar has a bottom, then an iron
sole-plate, three feet long, three-quarters of a foot wide, and a palm
thick, is placed in it. In the opening in the end of the mortar there is
fixed an iron plate full of holes, in such a way that there is a space
of two digits between it and the shoe of the nearest stamp, and the same
distance between this screen and the upright post, in an opening through
which runs a small but fairly long launder. The crushed particles of
silver ore flow through this launder with the water into a settling-pit,
while the material which settles in the launder is removed with an iron
shovel to the nearest planked floor; that material which has settled in
the pit is removed with an iron shovel on to another floor. Most people
make two launders, in order that while the workman empties one of them
of the accumulation which has settled in it, a fresh deposit may be
settling in the other. The water flows in through a small launder at the
other end of the mortar that is near the water-wheel which turns the
machine. The workman throws the ore to be crushed into the mortar in
such a way that the pieces, when they are thrown in among the stamps, do
not impede the work. By this method a silver or gold ore is crushed very
fine by the stamps.

[Illustration 314 (Buddle): A--Launder reaching to the screen.
B--Transverse trough. C--Spouts. D--Large buddles. E--Shovel.
F--Interwoven twigs. G--Boards closing the buddles. H--Cross trough.]

When tin ore is crushed by this kind of iron-shod stamps, as soon as
crushing begins, the launder which extends from the screen discharges
the water carrying the fine tin-stone and fine sand into a transverse
trough, from which the water flows down through the spouts, which pierce
the side of the trough, into the one or other of the large buddles set
underneath. The reason why there are two is that, while the washer
empties the one which is filled with fine tin-stone and sand, the
material may flow into the other. Each buddle is twelve feet long, one
cubit deep, and a foot and a half broad. The tin-stone which settles in
the upper part of the buddles is called the large size; these are
frequently stirred with a shovel, in order that the medium sized
particles of tin-stone, and the mud mixed with the very fine particles
of the stones may flow away. The particles of medium size generally
settle in the middle part of the buddle, where they are arrested by
interwoven fir twigs. The mud which flows down with the water settles
between the twigs and the board which closes the lower end of the
buddle. The tin-stone of large size is removed separately from the
buddle with a shovel; those of medium size are also removed separately,
and likewise the mud is removed separately, for they are separately
washed on the canvas strakes and on the ordinary strake, and separately
roasted and smelted. The tin-stone which has settled in the middle part
of the buddle, is also always washed separately on the canvas strakes;
but if the particles are nearly equal in size to those which have
settled in the upper part of the buddle, they are washed with them in
the ordinary strake and are roasted and smelted with them. However, the
mud is never washed with the others, either on the canvas strakes or on
the ordinary strake, but separately, and the fine tin-stone which is
obtained from it is roasted and smelted separately. The two large
buddles discharge into a cross trough, and it again empties through a
launder into a settling-pit which is outside the building.

This method of washing has lately undergone a considerable change; for
the launder which carries the water, mixed with the crushed tin-stone
and fine sand which flow from the openings of the screen, does not reach
to a transverse trough which is inside the same room, but runs straight
through a partition into a small settling-pit. A boy draws a
three-toothed rake through the material which has settled in the portion
of the launder outside the room, by which means the larger sized
particles of tin-stone settle at the bottom, and these the washer takes
out with the wooden shovel and carries into the room; this material is
thrown into an ordinary strake and swept with a wooden scrubber and
washed. As for those tin-stone particles which the water carries off
from the strake, after they have been brought back on to the strake, he
washes them again until they are clean.

[Illustration 315 (Buddle): A--First launder. B--Three-toothed rake.
C--Small settling pit. D--Large buddle. E--Buddle resembling the simple
buddle. F--Small roller. G--Boards. H--Their holes. I--Shovel.
K--Building. L--Stove. (This picture does not entirely agree with the
text).]

The remaining tin-stone, mixed with sand, flows into the small
settling-pit which is within the building, and this discharges into two
large buddles. The tin-stone of moderate size, mixed with those of
fairly large size, settle in the upper part, and the small size in the
lower part; but both are impure, and for this reason they are taken out
separately and the former is washed twice, first in a buddle like the
simple buddle, and afterward on an ordinary strake. Likewise the latter
is washed twice, first on a canvas strake and afterward on an ordinary
strake. This buddle, which is like the simple buddle, differs from it in
the head, the whole of which in this case is sloping, while in the case
of the other it is depressed in the centre. In order that the boy may be
able to rest the shovel with which he cleanses the tin-stone, this
sluice has a small wooden roller which turns in holes in two thick
boards fixed to the sides of the buddle; if he did not do this, he would
become over-exhausted by his task, for he spends whole days standing
over these labours. The large buddle, the one like the simple buddle,
the ordinary strake, and the canvas strakes, are erected within a
special building. In this building there is a stove that gives out heat
through the earthen tiles or iron plates of which it is composed, in
order that the washers can pursue their labours even in winter, if the
rivers are not completely frozen over.

[Illustration 317 (Workroom with settling-pit): A--Launder from the
screen of the mortar-box. B--Three-toothed rake. C--Small settling-pit.
D--Canvas. E--Strakes. F--Brooms.]

On the canvas strakes are washed the very fine tin-stone mixed with mud
which has settled in the lower end of the large buddle, as well as in
the lower end of the simple buddle and of the ordinary strake. The
canvas is cleaned in a trough hewn out of one tree trunk and partitioned
off with two boards, so that three compartments are made. The first and
second pieces of canvas are washed in the first compartment, the third
and fourth in the second compartment, the fifth and sixth in the third
compartment. Since among the very fine tin-stone there are usually some
grains of stone, rock, or marble, the master cleanses them on the
ordinary strake, lightly brushing the top of the material with a broom,
the twigs of which do not all run the same way, but some straight and
some crosswise. In this way the water carries off these impurities from
the strake into the settling-pit because they are lighter, and leaves
the tin-stone on the table because it is heavier.

Below all buddles or strakes, both inside and outside the building,
there are placed either settling-pits or cross-troughs into which they
discharge, in order that the water may carry on down into the stream but
very few of the most minute particles of tin-stone. The large
settling-pit which is outside the building is generally made of joined
flooring, and is eight feet in length, breadth and depth. When a large
quantity of mud, mixed with very fine tin-stone, has settled in it,
first of all the water is let out by withdrawing a plug, then the mud
which is taken out is washed outside the house on the canvas strakes,
and afterward the concentrates are washed on the strake which is inside
the building. By these methods the very finest tin-stone is made clean.

[Illustration 318 (Streaming for Tin): A--River. B--Weir. C--Gate.
D--Area. E--Meadow. F--Fence. G--Ditch.]

The mud mixed with the very fine tin-stone, which has neither settled in
the large settling-pit nor in the transverse launder which is outside
the room and below the canvas strakes, flows away and settles in the bed
of the stream or river. In order to recover even a portion of the fine
tin-stone, many miners erect weirs in the bed of the stream or river,
very much like those that are made above the mills, to deflect the
current into the races through which it flows to the water-wheels. At
one side of each weir there is an area dug out to a depth of five or six
or seven feet, and if the nature of the place will permit, extending
in every direction more than sixty feet. Thus, when the water of the
river or stream in autumn and winter inundates the land, the gates of
the weir are closed, by which means the current carries the mud mixed
with fine tin-stone into the area. In spring and summer this mud is
washed on the canvas strakes or on the ordinary strake, and even the
finest black-tin is collected. Within a distance of four thousand
fathoms along the bed of the stream or river below the buildings in
which the tin-stuff is washed, the miners do not make such weirs, but
put inclined fences in the meadows, and in front of each fence they dig
a ditch of the same length, so that the mud mixed with the fine
tin-stone, carried along by the stream or river when in flood, may
settle in the ditch and cling to the fence. When this mud is collected,
it is likewise washed on canvas strakes and on the ordinary strake, in
order that the fine tin-stone may be separated from it. Indeed we may
see many such areas and fences collecting mud of this kind in Meissen
below Altenberg in the river Moglitz,--which is always of a reddish
colour when the rock containing the black tin is being crushed under the
stamps.

[Illustration 320 (Stamp-mill): A--First machine. B--Its stamps. C--Its
mortar-box. D--Second machine. E--Its stamps. F--Its mortar-box.
G--Third machine. H--Its stamps. I--Its mortar-box. K--Fourth machine.
L--Its stamps. M--Its mortar-box.]

But to return to the stamping machines. Some usually set up four
machines of this kind in one place, that is to say, two above and the
same number below. By this plan it is necessary that the current which
has been diverted should fall down from a greater height upon the upper
water-wheels, because these turn axles whose cams raise heavier stamps.
The stamp-stems of the upper machines should be nearly twice as long as
the stems of the lower ones, because all the mortar-boxes are placed on
the same level. These stamps have their tappets near their upper ends,
not as in the case of the lower stamps, which are placed just above the
bottom. The water flowing down from the two upper water-wheels is caught
in two broad races, from which it falls on to the two lower
water-wheels. Since all these machines have the stamps very close
together, the stems should be somewhat cut away, to prevent the iron
shoes from rubbing each other at the point where they are set into the
stems. Where so many machines cannot be constructed, by reason of the
narrowness of the valley, the mountain is excavated and levelled in two
places, one of which is higher than the other, and in this case two
machines are constructed and generally placed in one building. A broad
race receives in the same way the water which flows down from the upper
water-wheel, and similarly lets it fall on the lower water-wheel. The
mortar-boxes are not then placed on one level, but each on the level
which is appropriate to its own machine, and for this reason, two
workmen are then required to throw ore into the mortar-boxes. When no
stream can be diverted which will fall from a higher place upon the top
of the water-wheel, one is diverted which will turn the foot of the
wheel; a great quantity of water from the stream is collected in one
pool capable of holding it, and from this place, when the gates are
raised, the water is discharged against the wheel which turns in the
race. The buckets of a water-wheel of this kind are deeper and bent
back, projecting upward; those of the former are shallower and bent
forward, inclining downward.

[Illustration 321 (Stamp-mill): A--Stamps. B--Mortar. C--Plates full of
holes. D--Transverse launder. E--Planks full of cup-like depressions.
F--Spout. G--Bowl into which the concentrates fall. H--Canvas strake.
I--Bowls shaped like a small boat. K--Settling-pit under the canvas
strake.]

Further, in the Julian and Rhaetian Alps[15] and in the Carpathian
Mountains, gold or even silver ore is now put under stamps, which are
sometimes placed more than twenty in a row, and crushed wet in a long
mortar-box. The mortar has two plates full of holes through which the
ore, after being crushed, flows out with the water into the transverse
launder placed underneath, and from there it is carried down by two
spouts into the heads of the canvas strakes. Each head is made of a
thick broad plank, which can be raised and set upright, and to which on
each side are fixed pieces projecting upward. In this plank there are
many cup-like depressions equal in size and similar in shape, in each of
which an egg could be placed. Right down in these depressions are small
crevices which can retain the concentrates of gold or silver, and when
the hollows are nearly filled with these materials, the plank is raised
on one side so that the concentrates will fall into a large bowl. The
cup-like depressions are washed out by dashing them with water. These
concentrates are washed separately in different bowls from those which
have settled on the canvas. This bowl is smooth and two digits wide and
deep, being in shape very similar to a small boat; it is broad in the
fore part, narrow in the back, and in the middle of it there is a cross
groove, in which the particles of pure gold or silver settle, while the
grains of sand, since they are lighter, flow out of it.

In some parts of Moravia, gold ore, which consists of quartz mixed with
gold, is placed under the stamps and crushed wet. When crushed fine it
flows out through a launder into a trough, is there stirred by a wooden
scrubber, and the minute particles of gold which settle in the upper end
of the trough are washed in a black bowl.

So far I have spoken of machines which crush wet ore with iron-shod
stamps. I will now explain the methods of washing which are in a measure
peculiar to the ore of certain metals, beginning with gold. The ore
which contains particles of this metal, and the sand of streams and
rivers which contains grains of it, are washed in frames or bowls; the
sands especially are also washed in troughs. More than one method is
employed for washing on frames, for these frames either pass or retain
the particles or concentrates of gold; they pass them if they have
holes, and retain them if they have no holes. But either the frame
itself has holes, or a box is substituted for it; if the frame itself is
perforated it passes the particles or concentrates of gold into a
trough; if the box has them, it passes the gold material into the long
sluice. I will first speak of these two methods of washing. The frame is
made of two planks joined together, and is twelve feet long and three
feet wide, and is full of holes large enough for a pea to pass. To
prevent the ore or sand with which the gold is mixed from falling out at
the sides, small projecting edge-boards are fixed to it. This frame is
set upon two stools, the first of which is higher than the second, in
order that the gravel and small stones can roll down it. The washer
throws the ore or sand into the head of the frame, which is higher, and
opening the small launder, lets the water into it, and then agitates it
with a wooden scrubber. In this way, the gravel and small stones roll
down the frame on to the ground, while the particles or concentrates of
gold, together with the sand, pass through the holes into the trough
which is placed under the frame, and after being collected are washed in
the bowl.

[Illustration 322 (Frames for Washing Ore or Alluvial): A--Head of
frame. B--Frame. C--Holes. D--Edge-boards. E--Stools. F--Scrubber.
G--Trough. H--Launder. I--Bowl.]

[Illustration 323 (Frames for Washing Ore or Alluvial): A--Sluice.
B--Box. C--Bottom of inverted box. D--Open part of it. E--Iron hoe.
F--Riffles. G--Small launder. H--Bowl with which settlings are taken
away. I--Black bowl in which they are washed.]

A box which has a bottom made of a plate full of holes, is placed over
the upper end of a sluice, which is fairly long but of moderate width.
The gold material to be washed is thrown into this box, and a great
quantity of water is let in. The lumps, if ore is being washed, are
mashed with an iron shovel. The fine portions fall through the bottom of
the box into the sluice, but the coarse pieces remain in the box, and
these are removed with a scraper through an opening which is nearly in
the middle of one side. Since a large amount of water is necessarily let
into the box, in order to prevent it from sweeping away any particles of
gold which have fallen into the sluice, the sluice is divided off by
ten, or if it is as long again, by fifteen riffles. These riffles are
placed equidistant from one another, and each is higher than the one
next toward the lower end of the sluice. The little compartments which
are thus made are filled with the material and the water which flows
through the box; as soon as these compartments are full and the water
has begun to flow over clear, the little launder through which this
water enters into the box is closed, and the water is turned in another
direction. Then the lowest riffle is removed from the sluice, and the
sediment which has accumulated flows out with the water and is caught in
a bowl. The riffles are removed one by one and the sediment from each is
taken into a separate bowl, and each is separately washed and cleansed
in a bowl. The larger particles of gold concentrates settle in the
higher compartments, the smaller size, in the lower compartments. This
bowl is shallow and smooth, and smeared with oil or some other slippery
substance, so that the tiny particles of gold may not cling to it, and
it is painted black, that the gold may be more easily discernible; on
the exterior, on both sides and in the middle, it is slightly hollowed
out in order that it may be grasped and held firmly in the hands when
shaken. By this method the particles or concentrates of gold settle in
the back part of the bowl; for if the back part of the bowl is tapped or
shaken with one hand, as is usual, the contents move toward the fore
part. In this way the Moravians, especially, wash gold ore.

The gold particles are also caught on frames which are either bare or
covered. If bare, the particles are caught in pockets; if covered, they
cling to the coverings. Pockets are made in various ways, either with
iron wire or small cross-boards fixed to the frame, or by holes which
are sunk into the sluice itself or into its head, but which do not quite
go through. These holes are round or square, or are grooves running
crosswise. The frames are either covered with skins, pieces of cloth, or
turf, which I will deal with one by one in turn.

[Illustration 324 (Frames for Washing Ore or Alluvial): A--Plank.
B--Side-boards. C--Iron wire. D--Handles.]

In order to prevent the sand which contains the particles of gold from
spilling out, the washer fixes side-boards to the edges of a plank which
is six feet long and one and a quarter wide. He then lays crosswise many
iron wires a digit apart, and where they join he fixes them to the
bottom plank with iron nails. Then he makes the head of the frame
higher, and into this he throws the sand which needs washing, and taking
in his hands the handles which are at the head of the frame, he draws it
backward and forward several times in the river or stream. In this way
the small stones and gravel flow down along the frame, and the sand
mixed with particles of gold remains in the pockets between the strips.
When the contents of the pockets have been shaken out and collected in
one place, he washes them in a bowl and thus cleans the gold dust.

[Illustration 326 (Frames for Washing Ore or Alluvial): A--Head of the
sluice. B--Riffles. C--Wooden scrubber. D--Pointed stick. E--Dish.
F--Its cup-like depression. G--Grooved dish.]

Other people, among whom are the Lusitanians[16], fix to the sides of a
sluice, which is about six feet long and a foot and a half broad, many
cross-strips or riffles, which project backward and are a digit apart.
The washer or his wife lets the water into the head of the sluice, where
he throws the sand which contains the particles of gold. As it flows
down he agitates it with a wooden scrubber, which he moves transversely
to the riffles. He constantly removes with a pointed wooden stick the
sediment which settles in the pockets between the riffles, and in this
way the particles of gold settle in them, while the sand and other
valueless materials are carried by the water into a tub placed below the
sluice. He removes the particles of metal with a small wooden shovel
into a wooden bowl. This bowl does not exceed a foot and a quarter in
breadth, and by moving it up and down in the stream he cleanses the gold
dust, for the remaining sand flows out of the dish, and the gold dust
settles in the middle of it, where there is a cup-like depression. Some
make use of a bowl which is grooved inside like a shell, but with a
smooth lip where the water flows out. This smooth place, however, is
narrower where the grooves run into it, and broader where the water
flows out.

[Illustration 327 (Frames for Washing Ore or Alluvial): A--Head of the
sluice. B--Side-boards. C--Lower end of the sluice. D--Pockets.
E--Grooves. F--Stools. G--Shovel. H--Tub set below. I--Launder.]

The cup-like pockets and grooves are cut or burned at the same time into
the bottom of the sluice; the bottom is composed of three planks ten
feet long, and is about four feet wide; but the lower end, through which
the water is discharged, is narrower. This sluice, which likewise has
side-boards fixed to its edges, is full of rounded pockets and of
grooves which lead to them, there being two grooves to one pocket, in
order that the water mixed with sand may flow into each pocket through
the upper groove, and that after the sand has partly settled, the water
may again flow out through the lower groove. The sluice is set in the
river or stream or on the bank, and placed on two stools, of which the
first is higher than the second in order that the gravel and small
stones may roll down the sluice. The washer throws sand into the head
with a shovel, and opening the launder, lets in the water, which carries
the particles of metal with a little sand down into the pockets, while
the gravel and small stones with the rest of the sand falls into a tub
placed below the sluice. As soon as the pockets are filled, he brushes
out the concentrates and washes them in a bowl. He washes again and
again through this sluice.

[Illustration 328 (Frames for Washing Ore or Alluvial): A--Cross
grooves. B--Tub set under the sluice. C--Another tub.]

Some people cut a number of cross-grooves, one palm distant from each
other, in a sluice similarly composed of three planks eight feet long.
The upper edge of these grooves is sloping, that the particles of gold
may slip into them when the washer stirs the sand with a wooden shovel;
but their lower edge is vertical so that the gold particles may thus be
unable to slide out of them. As soon as these grooves are full of gold
particles mixed with fine sand, the sluice is removed from the stools
and raised up on its head. The head in this case is nothing but the
upper end of the planks of which the sluice is composed. In this way the
metallic particles, being turned over backward, fall into another tub,
for the small stones and gravel have rolled down the sluice. Some people
place large bowls under the sluice instead of tubs, and as in the other
cases, the unclean concentrates are washed in the small bowl.

[Illustration 329 (Frames for Washing Ore or Alluvial): A--Sluice
covered with canvas. B--Its head full of pockets and grooves. C--Head
removed and washed in a tub. D--Sluice which has square pockets.
E--Sluice to whose planks small shavings cling. F--Broom. G--Skins of
oxen. H--Wooden scrubber.]

The Thuringians cut rounded pockets, a digit in diameter and depth, in
the head of the sluice, and at the same time they cut grooves reaching
from one to another. The sluice itself they cover with canvas. The sand
which is to be washed, is thrown into the head and stirred with a
wooden scrubber; in this way the water carries the light particles of
gold on to the canvas, and the heavy ones sink in the pockets, and when
these hollows are full, the head is removed and turned over a tub, and
the concentrates are collected and washed in a bowl. Some people make
use of a sluice which has square pockets with short vertical recesses
which hold the particles of gold. Other workers use a sluice made of
planks, which are rough by reason of the very small shavings which still
cling to them; these sluices are used instead of those with coverings,
of which this sluice is bare, and when the sand is washed, the particles
of gold cling no less to these shavings than to canvas, or skins, or
cloths, or turf. The washer sweeps the sluice upward with a broom, and
when he has washed as much of the sand as he wishes, he lets a more
abundant supply of water into the sluice again to wash out the
concentrates, which he collects in a tub set below the sluice, and then
washes again in a bowl. Just as Thuringians cover the sluice with
canvas, so some people cover it with the skins of oxen or horses. They
push the auriferous sand upward with a wooden scrubber, and by this
system the light material flows away with the water, while the particles
of gold settle among the hairs; the skins are afterward washed in a tub;
and the concentrates are collected in a bowl.

[Illustration 330 (Washing material in spring): A--Spring. B--Skin.
C--Argonauts.]

The Colchians[17] placed the skins of animals in the pools of springs;
and since many particles of gold had clung to them when they were
removed, poets invented the "golden fleece" of the Colchians. In like
manner, it can be contrived by the methods of miners that skins should
take up, not only particles of gold, but also of silver and gems.

[Illustration 331 (Frames for Washing Ore or Alluvial): A--Head of
frame. B--Frame. C--Cloth. D--small launder. E--Tub set below the frame.
F--Tub in which cloth is washed.]

Many people cover the frame with a green cloth as long and wide as the
frame itself, and fasten it with iron nails in such a way that they can
easily draw them out and remove the cloth. When the cloth appears to be
golden because of the particles which adhere to it, it is washed in a
special tub and the particles are collected in a bowl. The remainder
which has run down into the tub is again washed on the frame.

[Illustration 332 (Frames for Washing Ore or Alluvial): A--Cloth full
of small knots, spread out. B--Small knots more conspicuously shown.
C--Tub in which cloth is washed.]

Some people, in place of a green cloth, use a cloth of tightly woven
horsehair, which has a rough knotty surface. Since these knots stand out
and the cloth is rough, even the very small particles of gold adhere to
it; these cloths are likewise washed in a tub with water.

[Illustration 333 (Frames for Washing Ore or Alluvial): A--Head of
frame. B--Small launder through which water flows into head of frame.
C--Pieces of turf. D--Trough placed under frame. E--Tub in which pieces
of turf are washed.]

Some people construct a frame not unlike the one covered with canvas,
but shorter. In place of the canvas they set pieces of turf in rows.
They wash the sand, which has been thrown into the head of the frame, by
letting in water. In this way the particles of gold settle in the turf,
the mud and sand, together with the water, are carried down into the
settling-pit or trough below, which is opened when the work is finished.
After all the water has passed out of the settling-pit, the sand and mud
are carried away and washed over again in the same manner. The particles
which have clung to the turf are afterward washed down into the
settling-pit or trough by a stronger current of the water, which is let
into the frame through a small launder. The concentrates are finally
collected and washed in a bowl. Pliny was not ignorant of this method of
washing gold. "The ulex," he says, "after being dried, is burnt, and its
ashes are washed over a grassy turf, that the gold may settle on it."

[Illustration 334 (Trays for Washing Alluvial): A--Tray. B--Bowl-like
depression. C--Handles.]

Sand mixed with particles of gold is also washed in a tray, or in a
trough or bowl. The tray is open at the further end, is either hewn out
of a squared trunk of a tree or made out of a thick plank to which
side-boards are fixed, and is three feet long, a foot and a half wide,
and three digits deep. The bottom is hollowed out into the shape of an
elongated bowl whose narrow end is turned toward the head, and it has
two long handles, by which it is drawn backward and forward in the
river. In this way the fine sand is washed, whether it contains
particles of gold or the little black stones from which tin is made.

[Illustration 335 (Trough for washing alluvial): A--Trough. B--Its open
end. C--End that may be closed. D--Stream. E--Hoe. F--End-board.
G--Bag.]

The Italians who come to the German mountains seeking gold, in order to
wash the river sand which contains gold-dust and garnets,[19] use a
fairly long shallow trough hewn out of a tree, rounded within and
without, open at one end and closed at the other, which they turn in the
bed of the stream in such a way that the water does not dash into it,
but flows in gently. They stir the sand, which they throw into it, with
a wooden hoe, also rounded. To prevent the particles of gold or garnets
from running out with the light sand, they close the end with a board
similarly rounded, but lower than the sides of the trough. The
concentrates of gold or garnets which, with a small quantity of heavy
sand, have settled in the trough, they wash in a bowl and collect in
bags and carry away with them.

[Illustration 336 (Bowls for Alluvial Washing): A--Large bowl. B--Ropes.
C--Beam. D--Other large bowl which coiners use. E--Small bowl.]

Some people wash this kind of sand in a large bowl which can easily be
shaken, the bowl being suspended by two ropes from a beam in a building.
The sand is thrown into it, water is poured in, then the bowl is shaken,
and the muddy water is poured out and clear water is again poured in,
this being done again and again. In this way, the gold particles settle
in the back part of the bowl because they are heavy, and the sand in the
front part because it is light; the latter is thrown away, the former
kept for smelting. The one who does the washing then returns immediately
to his task. This method of washing is rarely used by miners, but
frequently by coiners and goldsmiths when they wash gold, silver, or
copper. The bowl they employ has only three handles, one of which they
grasp in their hands when they shake the bowl, and in the other two is
fastened a rope by which the bowl is hung from a beam, or from a
cross-piece which is upheld by the forks of two upright posts fixed in
the ground. Miners frequently wash ore in a small bowl to test it. This
bowl, when shaken, is held in one hand and thumped with the other hand.
In other respects this method of washing does not differ from the last.

[Illustration 337 (Ground Sluicing): A--Stream. B--Ditch. C--Mattock.
D--Pieces of turf. E--Seven-pronged fork. F--Iron shovel. G--Trough.
H--Another trough below it. I--Small wooden trowel.]

I have spoken of the various methods of washing sand which contains
grains of gold; I will now speak of the methods of washing the material
in which are mixed the small black stones from which tin is made[20].
Eight such methods are in use, and of these two have been invented
lately. Such metalliferous material is usually found torn away from
veins and stringers and scattered far and wide by the impetus of water,
although sometimes _venae dilatatae_ are composed of it. The miners dig
out the latter material with a broad mattock, while they dig the former
with a pick. But they dig out the little stones, which are not rare in
this kind of ore, with an instrument like the bill of a duck. In
districts which contain this material, if there is an abundant supply of
water, and if there are valleys or gentle slopes and hollows, so that
rivers can be diverted into them, the washers in summer-time first of
all dig a long ditch sloping so that the water will run through it
rapidly. Into the ditch is thrown the metallic material, together with
the surface material, which is six feet thick, more or less, and often
contains moss, roots of plants, shrubs, trees, and earth; they are all
thrown in with a broad mattock, and the water flows through the ditch.
The sand and tin-stone, as they are heavy, sink to the bottom of the
ditch, while the moss and roots, as they are light, are carried away by
the water which flows through the ditch. The bottom of the ditch is
obstructed with turf and stones in order to prevent the water from
carrying away the tin-stone at the same time. The washers, whose feet
are covered with high boots made of hide, though not of rawhide,
themselves stand in the ditch and throw out of it the roots of the
trees, shrubs, and grass with seven-pronged wooden forks, and push back
the tin-stone toward the head of the ditch. After four weeks, in which
they have devoted much work and labour, they raise the tin-stone in the
following way; the sand with which it is mixed is repeatedly lifted from
the ditch with an iron shovel and agitated hither and thither in the
water, until the sand flows away and only the tin-stone remains on the
shovel. The tin-stone is all collected together and washed again in a
trough by pushing it up and turning it over with a wooden trowel, in
order that the remaining sand may separate from it. Afterward they
return to their task, which they continue until the metalliferous
material is exhausted, or until the water can no longer be diverted into
the ditches.

[Illustration 338 (Sluicing Tin): A--Trough. B--Wooden shovel. C--Tub.
D--Launder. E--Wooden trowel. F--Transverse trough. G--Plug. H--Falling
water. I--Ditch. K--Barrow conveying material to be washed. L--Pick like
the beak of a duck with which the miner digs out the material from which
the small stones are obtained.]

The trough which I mentioned is hewn out of the trunk of a tree and the
interior is five feet long, three-quarters of a foot deep, and six
digits wide. It is placed on an incline and under it is put a tub which
contains interwoven fir twigs, or else another trough is put under it,
the interior of which is three feet long and one foot wide and deep; the
fine tin-stone, which has run out with the water, settles in the bottom.
Some people, in place of a trough, put a square launder underneath, and
in like manner they wash the tin-stone in this by agitating it up and
down and turning it over with a small wooden trowel. A transverse trough
is put under the launder, which is either open on one end and drains off
into a tub or settling-pit, or else is closed and perforated through the
bottom; in this case, it drains into a ditch beneath, where the water
falls when the plug has been partly removed. The nature of this ditch I
will now describe.

[Illustration 340 (Sluicing Tin): A--Launder. B--Interlacing fir twigs.
C--Logs; three on one side, for the fourth cannot be seen because the
ditch is so full with material now being washed. D--Logs at the head of
the ditch. E--Barrow. F--Seven-pronged fork. G--Hoe.]

If the locality does not supply an abundance of water, the washers dig a
ditch thirty or thirty-six feet long, and cover the bottom, the full
length, with logs joined together and hewn on the side which lies flat
on the ground. On each side of the ditch, and at its head also, they
place four logs, one above the other, all hewn smooth on the inside. But
since the logs are laid obliquely along the sides, the upper end of the
ditch is made four feet wide and the tail end, two feet. The water has a
high drop from a launder and first of all it falls into interlaced fir
twigs, in order that it shall fall straight down for the most part in an
unbroken stream and thus break up the lumps by its weight. Some do not
place these twigs under the end of the launder, but put a plug in its
mouth, which, since it does not entirely close the launder, nor
altogether prevent the discharge from it, nor yet allow the water to
spout far afield, makes it drop straight down. The workman brings in a
wheelbarrow the material to be washed, and throws it into the ditch. The
washer standing in the upper end of the ditch breaks the lumps with a
seven-pronged fork, and throws out the roots of trees, shrubs, and grass
with the same instrument, and thereby the small black stones settle
down. When a large quantity of the tin-stone has accumulated, which
generally happens when the washer has spent a day at this work, to
prevent it from being washed away he places it upon the bank, and other
material having been again thrown into the upper end of the ditch, he
continues the task of washing. A boy stands at the lower end of the
ditch, and with a thin pointed hoe stirs up the sediment which has
settled at the lower end, to prevent the washed tin-stone from being
carried further, which occurs when the sediment has accumulated to such
an extent that the fir branches at the outlet of the ditch are covered.

[Illustration 341 (Sifting Ore): A--Strakes. B--Tank. C--Launder.
D--Plug. E--Wooden shovel. F--Wooden mallet. G--Wooden shovel with short
handle. H--The plug in the strake. I--Tank placed under the plug.]

The third method of washing materials of this kind follows. Two strakes
are made, each of which is twelve feet long and a foot and a half wide
and deep. A tank is set at their head, into which the water flows
through a little launder. A boy throws the ore into one strake; if it is
of poor quality he puts in a large amount of it, if it is rich he puts
in less. The water is let in by removing the plug, the ore is stirred
with a wooden shovel, and in this way the tin-stone, mixed with the
heavier material, settles in the bottom of the strake, and the water
carries the light material into the launder, through which it flows on
to a canvas strake. The very fine tin-stone, carried by the water,
settles on to the canvas and is cleansed. A low cross-board is placed in
the strake near the head, in order that the largest sized tin-stone may
settle there. As soon as the strake is filled with the material which
has been washed, he closes the mouth of the tank and continues washing
in the other strake, and then the plug is withdrawn and the water and
tin-stone flow down into a tank below. Then he pounds the sides of the
loaded strake with a wooden mallet, in order that the tin-stone clinging
to the sides may fall off; all that has settled in it, he throws out
with a wooden shovel which has a short handle. Silver slags which have
been crushed under the stamps, also fragments of silver-lead alloy and
of cakes melted from pyrites, are washed in a strake of this kind.

[Illustration 342 (Sifting Ore): A--Sieve. B--Tub. C--Water flowing out
of the bottom of it. D--Strake. E--Three-toothed rake. F--Wooden
scrubber.]

Material of this kind is also washed while wet, in a sieve whose bottom
is made of woven iron wire, and this is the fourth method of washing.
The sieve is immersed in the water which is contained in a tub, and is
violently shaken. The bottom of this tub has an opening of such size
that as much water, together with tailings from the sieve, can flow
continuously out of it as water flows into it. The material which
settles in the strake, a boy either digs over with a three-toothed iron
rake or sweeps with a wooden scrubber; in this way the water carries off
a great part of both sand and mud. The tin-stone or metalliferous
concentrates settle in the strake and are afterward washed in another
strake.

[Illustration 343 (Sluicing Tin): A--Box. B--Perforated plate.
C--Trough. D--Cross-boards. E--Pool. F--Launder. G--Shovel. H--Rake.]

These are ancient methods of washing material which contains tin-stone;
there follow two modern methods. If the tin-stone mixed with earth or
sand is found on the slopes of mountains or hills, or in the level
fields which are either devoid of streams or into which a stream cannot
be diverted, miners have lately begun to employ the following method of
washing, even in the winter months. An open box is constructed of
planks, about six feet long, three feet wide, and two feet and one palm
deep. At the upper end on the inside, an iron plate three feet long and
wide is fixed, at a depth of one foot and a half from the top; this
plate is very full of holes, through which tin-stone about the size of a
pea can fall. A trough hewn from a tree is placed under the box, and
this trough is about twenty-four feet long and three-quarters of a foot
wide and deep; very often three cross-boards are placed in it, dividing
it off into compartments, each one of which is lower than the next. The
turbid waters discharge into a settling-pit.

The metalliferous material is sometimes found not very deep beneath the
surface of the earth, but sometimes so deep that it is necessary to
drive tunnels and sink shafts. It is transported to the washing-box in
wheelbarrows, and when the washers are about to begin they lay a small
launder, through which there flows on to the iron plate so much water
as is necessary for this washing. Next, a boy throws the metalliferous
material on to the iron plate with an iron shovel and breaks the small
lumps, stirring them this way and that with the same implement. Then the
water and sand penetrating the holes of the plate, fall into the box,
while all the coarse gravel remains on the plate, and this he throws
into a wheelbarrow with the same shovel. Meantime, a younger boy
continually stirs the sand under the plate with a wooden scrubber nearly
as wide as the box, and drives it to the upper end of the box; the
lighter material, as well as a small amount of tin-stone, is carried by
the water down into the underlying trough. The boys carry on this labour
without intermission until they have filled four wheelbarrows with the
coarse and worthless residues, which they carry off and throw away, or
three wheelbarrows if the material is rich in black tin. Then the
foreman has the plank removed which was in front of the iron plate, and
on which the boy stood. The sand, mixed with the tin-stone, is
frequently pushed backward and forward with a scrubber, and the same
sand, because it is lighter, takes the upper place, and is removed as
soon as it appears; that which takes the lower place is turned over with
a spade, in order that any that is light can flow away; when all the
tin-stone is heaped together, he shovels it out of the box and carries
it away. While the foreman does this, one boy with an iron hoe stirs the
sand mixed with fine tin-stone, which has run out of the box and has
settled in the trough and pushes it back to the uppermost part of the
trough, and this material, since it contains a very great amount of
tin-stone, is thrown on to the plate and washed again. The material
which has settled in the lowest part of the trough is taken out
separately and piled in a heap, and is washed on the ordinary strake;
that which has settled in the pool is washed on the canvas strake. In
the summer-time this fruitful labour is repeated more often, in fact ten
or eleven times. The tin-stone which the foreman removes from the box,
is afterward washed in a jigging sieve, and lastly in a tub, where at
length all the sand is separated out. Finally, any material in which are
mixed particles of other metals, can be washed by all these methods,
whether it has been disintegrated from veins or stringers, or whether it
originated from _venae dilatatae_, or from streams and rivers.

[Illustration 345 (Ground Sluicing): A--Launder. B--Cross trough. C--Two
spouts. D--Boxes. E--Plate. F--Grating. G--Shovels. H--Second cross
trough. I--Strake. K--Wooden scrubber. L--Third cross trough.
M--Launder. N--Three-toothed rake.]

The sixth method of washing material of this kind is even more modern
and more useful than the last. Two boxes are constructed, into each of
which water flows through spouts from a cross trough into which it has
been discharged through a pipe or launder. When the material has been
agitated and broken up with iron shovels by two boys, part of it runs
down and falls through the iron plates full of holes, or through the
iron grating, and flows out of the box over a sloping surface into
another cross trough, and from this into a strake seven feet long and
two and a half feet wide. Then the foreman again stirs it with a wooden
scrubber that it may become clean. As for the material which has flowed
down with the water and settled in the third cross trough, or in the
launder which leads from it, a third boy rakes it with a two-toothed
rake; in this way the fine tin-stone settles down and the water carries
off the valueless sand into the creek. This method of washing is most
advantageous, for four men can do the work of washing in two boxes,
while the last method, if doubled, requires six men, for it requires two
boys to throw the material to be washed on to the plate and to stir it
with iron shovels; two more are required with wooden scrubbers to keep
stirring the sand, mixed with the tin-stone, under the plate, and to
push it toward the upper end of the box; further, two foremen are
required to clean the tin-stone in the way I have described. In the
place of a plate full of holes, they now fix in the boxes a grating made
of iron wire as thick as the stalks of rye; that these may not be
depressed by the weight and become bent, three iron bars support them,
being laid crosswise underneath. To prevent the grating from being
broken by the iron shovels with which the material is stirred in
washing, five or six iron rods are placed on top in cross lines, and are
fixed to the box so that the shovels may rub them instead of the
grating; for this reason the grating lasts longer than the plates,
because it remains intact, while the rods, when worn by rubbing, can
easily be replaced by others.

[Illustration 346 (Ground Sluicing): A--Pits. B--Torrent.
C--Seven-pronged fork. D--Shovel.]

Miners use the seventh method of washing when there is no stream of
water in the part of the mountain which contains the black tin, or
particles of gold, or of other metals. In this case they frequently dig
more than fifty ditches on the slope below, or make the same number of
pits, six feet long, three feet wide, and three-quarters of a foot deep,
not any great distance from each other. At the season when a torrent
rises from storms of great violence or long duration, and rushes down
the mountain, some of the miners dig the metalliferous material in the
woods with broad hoes and drag it to the torrent. Other miners divert
the torrent into the ditches or pits, and others throw the roots of
trees, shrubs, and grass out of the ditches or pits with seven-pronged
wooden forks. When the torrent has run down, they remove with shovels
the uncleansed tin-stone or particles of metal which have settled in the
ditches or pits, and cleanse it.

[Illustration 347 (Ground Sluicing): A--Gully. B--Ditch. C--Torrent.
D--Sluice box employed by the Lusitanians.]

The eighth method is also employed in the regions which the Lusitanians
hold in their power and sway, and is not dissimilar to the last. They
drive a great number of deep ditches in rows in the gullies, slopes,
and hollows of the mountains. Into these ditches the water, whether
flowing down from snow melted by the heat of the sun or from rain,
collects and carries together with earth and sand, sometimes tin-stone,
or, in the case of the Lusitanians, the particles of gold loosened from
veins and stringers. As soon as the waters of the torrent have all run
away, the miners throw the material out of the ditches with iron
shovels, and wash it in a common sluice box.

[Illustration 348 (Trough for washing alluvial): A--Trough. B--Launder.
C--Hoe. D--Sieve.]

The Poles wash the impure lead from _venae dilatatae_ in a trough ten
feet long, three feet wide, and one and one-quarter feet deep. It is
mixed with moist earth and is covered by a wet and sandy clay, and so
first of all the clay, and afterward the ore, is dug out. The ore is
carried to a stream or river, and thrown into a trough into which water
is admitted by a little launder, and the washer standing at the lower
end of the trough drags the ore out with a narrow and nearly pointed
hoe, whose wooden handle is nearly ten feet long. It is washed over
again once or twice in the same way and thus made pure. Afterward when
it has been dried in the sun they throw it into a copper sieve, and
separate the very small pieces which pass through the sieve from the
larger ones; of these the former are smelted in a faggot pile and the
latter in the furnace. Of such a number then are the methods of washing.

[Illustration 349 (Tin burning Furnace): A--Furnace. B--Its mouth.
C--Poker. D--Rake with two teeth. E--Hoe.]

One method of burning is principally employed, and two of roasting. The
black tin is burned by a hot fire in a furnace similar to an oven[21];
it is burned if it is a dark-blue colour, or if pyrites and the stone
from which iron is made are mixed with it, for the dark blue colour if
not burnt, consumes the tin. If pyrites and the other stone are not
volatilised into fumes in a furnace of this kind, the tin which is made
from the tin-stone is impure. The tin-stone is thrown either into the
back part of the furnace, or into one side of it; but in the former case
the wood is placed in front, in the latter case alongside, in such a
manner, however, that neither firebrands nor coals may fall upon the
tin-stone itself or touch it. The fuel is manipulated by a poker made of
wood. The tin-stone is now stirred with a rake with two teeth, and now
again levelled down with a hoe, both of which are made of iron. The very
fine tin-stone requires to be burned less than that of moderate size,
and this again less than that of the largest size. While the tin-stone
is being thus burned, it frequently happens that some of the material
runs together.

The burned tin-stone should then be washed again on the strake, for in
this way the material which has been run together is carried away by the
water into the cross-trough, where it is gathered up and worked over,
and again washed on the strake. By this method the metal is separated
from that which is devoid of metal.

[Illustration 350 (Stall Roasting Matte): A--Pits. B--Wood. C--Cakes.
D--Launder.]

Cakes from pyrites, or _cadmia_, or cupriferous stones, are roasted in
quadrangular pits, of which the front and top are open, and these pits
are generally twelve feet long, eight feet wide, and three feet deep.
The cakes of melted pyrites are usually roasted twice over, and those of
_cadmia_ once. These latter are first rolled in mud moistened with
vinegar, to prevent the fire from consuming too much of the copper with
the bitumen, or sulphur, or orpiment, or realgar. The cakes of pyrites
are first roasted in a slow fire and afterward in a fierce one, and in
both cases, during the whole following night, water is let in, in order
that, if there is in the cakes any alum or vitriol or saltpetre capable
of injuring the metals, although it rarely does injure them, the water
may remove it and make the cakes soft. The solidified juices are nearly
all harmful to the metal, when cakes or ore of this kind are smelted.
The cakes which are to be roasted are placed on wood piled up in the
form of a crate, and this pile is fired[22].

[Illustration 351 (Matte Roasting): A--Cakes. B--Bundles of faggots.
C--Furnaces.]

The cakes which are made of copper smelted from schist are first thrown
upon the ground and broken, and then placed in the furnace on bundles of
faggots, and these are lighted. These cakes are generally roasted seven
times and occasionally nine times. While this is being done, if they are
bituminous, then the bitumen burns and can be smelled. These furnaces
have a structure like the structure of the furnaces in which ore is
smelted, except that they are open in front; they are six feet high and
four feet wide. As for this kind of furnace, three of them are required
for one of those in which the cakes are melted. First of all they are
roasted in the first furnace, then when they are cooled, they are
transferred into the second furnace and again roasted; later they are
carried to the third, and afterward back to the first, and this order is
preserved until they have been roasted seven or nine times.

     END OF BOOK VIII.


FOOTNOTES:

[1] As would be expected, practically all the technical terms used by
Agricola in this chapter are adaptations. The Latin terms, _canalis_,
_area_, _lacus_, _vasa_, _cribrum_, and _fossa_, have had to be pressed
into service for many different devices, largely by extemporised
combinations. Where the devices described have become obsolete, we have
adopted the nomenclature of the old works on Cornish methods. The
following examples may be of interest:--

  Simple buddle   = _Canalis simplex_
  Divided buddle  = _Canalis tabellis distinctus_
  Ordinary strake = _Canalis devexus_
  Short strake    = _Area curta_
  Canvas strake   = _Area linteis extensis contecta_
  Limp            = _Radius_.

The strake (or streke) when applied to alluvial tin, would have been
termed a "tye" in some parts of Cornwall, and the "short strake" a
"gounce." In the case of the stamp mill, inasmuch as almost every
mechanical part has its counterpart in a modern mill, we have considered
the reader will have less difficulty if the modern designations are used
instead of the old Cornish. The following are the essential terms in
modern, old Cornish, and Latin:--

  Stamp          Stamper      _Pilum_
  Stamp-stem     Lifter       _Pilum_
  Shoes          Stamp-heads  _Capita_
  Mortar-box     Box          _Capsa_
  Cam-shaft      Barrell      _Axis_
  Cams           Caps         _Dentes_
  Tappets        Tongues      _Pili dentes_
  Screen         Crate        _Laminae foraminum plenae_
  Settling pit   Catchers     _Lacus_
  Jigging sieve  Dilleugher   _Cribrum angustum_


[2] Agricola uses four Latin verbs in connection with heat operations at
temperatures under the melting point: _Calefacio_, _uro_, _torreo_, and
_cremo_. The first he always uses in the sense of "to warm" or "to
heat," but the last three he uses indiscriminately in much the same way
as the English verbs burn, roast, and calcine are used; but in general
he uses the Latin verbs in the order given to indicate degrees of heat.
We have used the English verbs in their technical sense as indicated by
the context.

It is very difficult to say when roasting began as a distinct and
separate metallurgical step in sulphide ore treatment. The Greeks and
Romans worked both lead and copper sulphides (see note on p. 391, and
note on p. 403), but neither in the remains of old works nor in their
literature is there anything from which satisfactory details of such a
step can be obtained. The Ancients, of course, understood lime-burning,
and calcined several salts to purify them or to render them more
caustic. Practically the only specific mention is by Pliny regarding
lead ores (see p. 391). Even the statement of Theophilus (1050-1100,
A.D.), may refer simply to rendering ore more fragile, for he says (p.
305) in regard to copper ore: "This stone dug up in abundance is placed
upon a pile and burned (_comburitur_) after the manner of lime. Nor does
it change colour, but loses its hardness and can be broken up, and
afterward it is smelted." The _Probierbuechlein_ casually mentions
roasting prior to assaying, and Biringuccio (III, 2) mentions
incidentally that "dry and ill-disposed ores before everything must be
roasted in an open oven so that the air can get in." He gives no further
information; and therefore this account of Agricola's becomes
practically the first. Apparently roasting, as a preliminary to the
treatment of copper sulphides, did not come into use in England until
some time later than Agricola, for in Col. Grant Francis' "Smelting of
Copper in the Swansea District" (London, 1881, p. 29), a report is set
of the "Doeinges of Jochim Ganse"--an imported German--at the "Mynes by
Keswicke in Cumberland, A.D., 1581," wherein the delinquencies of the
then current practice are described: "Thei never coulde, nether yet can
make (copper) under XXII. tymes passinge thro the fire, and XXII. weekes
doeing thereof ane sometyme more. But now the nature of these IX.
hurtfull humors abovesaid being discovered and opened by Jochim's way of
doeing, we can, by his order of workeinge, so correct theim, that parte
of theim beinge by nature hurtfull to the copper in wasteinge of it, ar
by arte maide freindes, and be not onely an encrease to the copper, but
further it in smeltinge; and the rest of the other evill humors shalbe
so corrected, and their humors so taken from them, that by once
rosteinge and once smeltinge the ure (which shalbe done in the space of
three dayes), the same copper ure shall yeeld us black copper." Jochim
proposed by 'rostynge' to be rid of "sulphur, arsineque, and antimony."

[3] _Orpiment_ and _realgar_ are the red and yellow arsenical sulphides.
(See note on p. 111).

[4] _Cadmia bituminosa_. The description of this substance by Agricola,
given below, indicates that it was his term for the complex
copper-zinc-arsenic-cobalt minerals found in the well-known, highly
bituminous, copper schists at Mannsfeld. The later Mineralogists,
Wallerius (_Mineralogia_, Stockholm, 1747), Valmont De Bomare
(_Mineralogie_, Paris, 1762), and others assume Agricola's _cadmia
bituminosa_ to be "black arsenic" or "arsenic noir," but we see no
reason for this assumption. Agricola's statement (_De Nat. Foss._, p.
369) is "... the schistose stone dug up at the foot of the Melibocus
Mountains, or as they are now called the Harz (_Hercynium_), near
Eisleben, Mannsfeld, and near Hettstedt, is similar to _spinos_ (a
bituminous substance described by Theophrastus), if not identical with
it. This is black, bituminous, and cupriferous, and when first extracted
from the mine it is thrown out into an open space and heaped up in a
mound. Then the lower part of the mound is surrounded by faggots, on to
which are likewise thrown stones of the same kind. Then the faggots are
kindled and the fire soon spreads to the stones placed upon them; by
these the fire is communicated to the next, which thus spreads to the
whole heap. This easy reception of fire is a characteristic which
bitumen possesses in common with sulphur. Yet the small, pure and black
bituminous ore is distinguished from the stones as follows: when they
burn they emit the kind of odour which is usually given off by burning
bituminous coal, and besides, if while they are burning a small shower
of rain should fall, they burn more brightly and soften more quickly.
Indeed, when the wind carries the fumes so that they descend into nearby
standing waters, there can be seen floating in it something like a
bituminous liquid, either black, or brown, or purple, which is
sufficient to indicate that those stones were bituminous. And that genus
of stones has been recently found in the Harz in layers, having
occasionally gold-coloured specks of pyrites adhering to them,
representing various flat sea-fish or pike or perch or birds, and
poultry cocks, and sometimes salamanders."

[5] _Atramentum sutorium rubrum_. Literally, this would be red vitriol.
The German translation gives _rot kupferwasser_, also red vitriol. We
must confess that we cannot make this substance out, nor can we find it
mentioned in the other works of Agricola. It may be the residue from
leaching roasted pyrites for vitriol, which would be reddish oxide of
iron.

[6] The statement "elsewhere" does not convey very much more
information. It is (_De Nat. Fos._, p. 253): "When Goslar pyrites and
Eisleben (copper) schists are placed on the pyre and roasted for the
third time, they both exude a certain substance which is of a greenish
colour, dry, rough, and fibrous (_tenue_). This substance, like
asbestos, is not consumed by the fire. The schists exude it more
plentifully than the pyrites." The _Interpretatio_ gives _federwis_, as
the German equivalent of _amiantus_ (asbestos). This term was used for
the feathery alum efflorescence on aluminous slates.

[7] Bearing in mind that bituminous cadmia contained arsenical-cobalt
minerals, this substance "resembling _pompholyx_" would probably be
arsenic oxide. In _De Natura Fossilium_ (p. 368). Agricola discusses the
_pompholyx_ from _cadmia_ at length and pronounces it to be of
remarkably "corrosive" quality. (See also note on p. 112.)

[8] HISTORICAL NOTE ON CRUSHING AND CONCENTRATION OF ORES. There can be
no question that the first step in the metallurgy of ores was direct
smelting, and that this antedates human records. The obvious advantages
of reducing the bulk of the material to be smelted by the elimination of
barren portions of the ore, must have appealed to metallurgists at a
very early date. Logically, therefore, we should find the second step in
metallurgy to be concentration in some form. The question of crushing is
so much involved with concentration that we have not endeavoured to keep
them separate. The earliest indication of these processes appears to be
certain inscriptions on monuments of the IV Dynasty (4,000 B.C.?)
depicting gold washing (Wilkinson, The Ancient Egyptians, London, 1874,
II, p. 137). Certain stelae of the XII Dynasty (2,400 B.C.) in the
British Museum (144 Bay 1 and 145 Bay 6) refer to gold washing in the
Sudan, and one of them appears to indicate the working of gold ore as
distinguished from alluvial. The first written description of the
Egyptian methods--and probably that reflecting the most ancient
technology of crushing and concentration--is that of Agatharchides, a
Greek geographer of the second Century B.C. This work is lost, but the
passage in question is quoted by Diodorus Siculus (1st Century B.C.) and
by Photius (died 891 A.D.). We give Booth's translation of Diodorus
(London, 1700, p. 89), slightly amended: "In the confines of Egypt and
the neighbouring countries of Arabia and Ethiopia there is a place full
of rich gold mines, out of which with much cost and pains of many
labourers gold is dug. The soil here is naturally black, but in the body
of the earth run many white veins, shining like white marble, surpassing
in lustre all other bright things. Out of these laborious mines, those
appointed overseers cause the gold to be dug up by the labour of a vast
multitude of people. For the Kings of Egypt condemn to these mines
notorious criminals, captives taken in war, persons sometimes falsely
accused, or against whom the King is incens'd; and not only they
themselves, but sometimes all their kindred and relations together with
them, are sent to work here, both to punish them, and by their labour to
advance the profit and gain of the Kings. There are infinite numbers
upon these accounts thrust down into these mines, all bound in fetters,
where they work continually, without being admitted any rest night or
day, and so strictly guarded that there is no possibility or way left to
make an escape. For they set over them barbarians, soldiers of various
and strange languages, so that it is not possible to corrupt any of the
guard by discoursing one with another, or by the gaining insinuations of
familiar converse. The earth which is hardest and full of gold they
soften by putting fire under it, and then work it out with their hands.
The rocks thus soften'd and made more pliant and yielding, several
thousands of profligate wretches break in pieces with hammers and
pickaxes. There is one artist that is the overseer of the whole work,
who marks out the stone, and shows the labourers the way and manner how
he would have it done. Those that are the strongest amongst them that
are appointed to this slavery, provided with sharp iron pickaxes, cleave
the marble-shining rock by mere force and strength, and not by arts or
sleight-of-hand. They undermine not the rock in a direct line, but
follow the bright shining vein of the mine. They carry lamps fastened to
their foreheads to give them light, being otherwise in perfect darkness
in the various windings and turnings wrought in the mine; and having
their bodies appearing sometimes of one colour and sometimes of another
(according to the nature of the mine where they work) they throw the
lumps and pieces of the stone cut out of the rock upon the floor. And
thus they are employed continually without intermission, at the very nod
of the overseer, who lashes them severely besides. And there are little
boys who penetrate through the galleries into the cavities and with
great labour and toil gather up the lumps and pieces hewed out of the
rock as they are cast upon the ground, and carry them forth and lay them
upon the bank. Those that are over thirty years of age take a piece of
the rock of such a certain quantity, and pound it in a stone mortar with
iron pestles till it be as small as a vetch; then those little stones so
pounded are taken from them by women and older men, who cast them into
mills that stand together there near at hand in a long row, and two or
three of them being employed at one mill they grind a certain measure
given to them at a time, until it is as small as fine meal. No care at
all is taken of the bodies of these poor creatures, so that they have
not a rag so much as to cover their nakedness, and no man that sees them
can choose but commiserate their sad and deplorable condition. For
though they are sick, maimed, or lame, no rest nor intermission in the
least is allowed them; neither the weakness of old age, nor women's
infirmities are any plea to excuse them; but all are driven to their
work with blows and cudgelling, till at length, overborne with the
intolerable weight of their misery, they drop down dead in the midst of
their insufferable labours; so that these miserable creatures always
expect the future to be more terrible than even the present, and
therefore long for death as far more desirable than life.

"At length the masters of the work take the stone thus ground to powder,
and carry it away in order to perfect it. They spread the mineral so
ground upon a broad board, somewhat sloping, and pouring water upon it,
rub it and cleanse it; and so all the earthy and drossy part being
separated from the rest by the water, it runs off the board, and the
gold by reason of its weight remains behind. Then washing it several
times again, they first rub it lightly with their hands; afterward they
draw off any earthy and drossy matter with slender sponges gently
applied to the powdered dust, till it be clean, pure gold. At last other
workmen take it away by weight and measure, and these put it into
earthen pots, and according to the quantity of the gold in every pot
they mix with it some lead, grains of salt, a little tin and barley
bran. Then, covering every pot close, and carefully daubing them over
with clay, they put them in a furnace, where they abide five days and
nights together; then after a convenient time that they have stood to
cool, nothing of the other matter is to be found in the pots but only
pure, refined gold, some little thing diminished in the weight. And thus
gold is prepared in the borders of Egypt, and perfected and completed
with so many and so great toils and vexations. And, therefore, I cannot
but conclude that nature itself teaches us, that as gold is got with
labour and toil, so it is kept with difficulty; it creates everywhere
the greatest cares; and the use of it is mixed both with pleasure and
sorrow."

The remains at Mt. Laurion show many of the ancient mills and
concentration works of the Greeks, but we cannot be absolutely certain
at what period in the history of these mines crushing and concentration
were introduced. While the mines were worked with great activity prior
to 500 B.C. (see note 6, p. 27), it was quite feasible for the ancient
miner to have smelted these argentiferous lead ores direct. However, at
some period prior to the decadence of the mines in the 3rd Century B.C.,
there was in use an extensive system of milling and concentration. For
the following details we are indebted mostly to Edouard Ardaillon (_Les
Mines Du Laurion dans l'Antiquite_, Chap. IV.). The ore was first
hand-picked (in 1869 one portion of these rejects was estimated at
7,000,000 tons) and afterward it was apparently crushed in stone mortars
some 16 to 24 inches in diameter, and thence passed to the mills. These
mills, which crushed dry, were of the upper and lower millstone order,
like the old-fashioned flour mills, and were turned by hand. The stones
were capable of adjustment in such a way as to yield different sizes.
The sand was sifted and the oversize returned to the mills. From the
mills it was taken to washing plants, which consisted essentially of an
inclined area, below which a canal, sometimes with riffles, led through
a series of basins, ultimately returning the water again to near the
head of the area. These washing areas, constructed with great care, were
made of stone cemented over smoothly, and were so efficiently done as to
remain still intact. In washing, a workman brushed upward the pulp
placed on the inclined upper portion of the area, thus concentrating
there a considerable proportion of the galena; what escaped had an
opportunity to settle in the sequence of basins, somewhat on the order
of the buddle. A quotation by Strabo (III, 2, 10) from the lost work of
Polybius (200-125 B.C.) also indicates concentration of lead-silver ores
in Spain previous to the Christian era: "Polybius speaking of the silver
mines of New Carthage, tells us that they are extremely large, distant
from the city about 20 stadia, and occupy a circuit of 400 stadia, that
there are 40,000 men regularly engaged in them, and that they yield
daily to the Roman people (a revenue of) 25,000 drachmae. The rest of
the process I pass over, as it is too long, but as for the silver ore
collected, he tells us that it is broken up, and sifted through sieves
over water; that what remains is to be again broken, and the water
having been strained off, it is to be sifted and broken a third time.
The dregs which remain after the fifth time are to be melted, and the
lead being poured off, the silver is obtained pure. These silver mines
still exist; however, they are no longer the property of the state,
neither these nor those elsewhere, but are possessed by private
individuals. The gold mines, on the contrary, nearly all belong to the
state. Both at Castlon and other places there are singular lead mines
worked. They contain a small proportion of silver, but not sufficient to
pay for the expense of refining." (Hamilton's Translation, Vol. I., p.
222). While Pliny gives considerable information on vein mining and on
alluvial washing, the following obscure passage (XXXIII, 21) appears to
be the only reference to concentration of ores: "That which is dug out
is crushed, washed, roasted, and ground to powder. This powder is called
_apitascudes_, while the silver (lead?) which becomes disengaged in the
furnace is called _sudor_ (sweat). That which is ejected from the
chimney is called _scoria_ as with other metals. In the case of gold
this _scoria_ is crushed and melted again." It is evident enough from
these quotations that the Ancients by "washing" and "sifting," grasped
the practical effect of differences in specific gravity of the various
components of an ore. Such processes are barely mentioned by other
mediaeval authors, such as Theophilus, Biringuccio, etc., and thus the
account in this chapter is the first tangible technical description.
Lead mining has been in active progress in Derbyshire since the 13th
century, and concentration was done on an inclined board until the 16th
century, when William Humphrey (see below) introduced the jigging sieve.
Some further notes on this industry will be found in note 1, p. 77.
However, the buddle and strake which appear at that time, are but modest
improvements over the board described by Agatharchides in the quotation
above.

The ancient crushing appliances, as indicated by the ancient authors and
by the Greek and Roman remains scattered over Europe, were hand-mortars
and mill-stones of the same order as those with which they ground flour.
The stamp-mill, the next advance over grinding in mill-stones, seems to
have been invented some time late in the 15th or early in the 16th
centuries, but who invented it is unknown. Beckmann (Hist. of
Inventions, II, p. 335) says: "In the year 1519 the process of sifting
and wet-stamping was established at Joachimsthal by Paul Grommestetter,
a native of Schwarz, named on that account the Schwarzer, whom Melzer
praises as an ingenious and active washer; and we are told that he had
before introduced the same improvements at Schneeberg. Soon after, that
is in 1521, a large stamping-work was erected at Joachimsthal, and the
process of washing was begun. A considerable saving was thus made, as a
great many metallic particles were before left in the washed sand, which
was either thrown away or used as mortar for building. In the year 1525,
Hans Poertner employed at Schlackenwalde the wet method of stamping,
whereas before that period the ore there was ground. In the Harz this
invention was introduced at Wildenmann by Peter Philip, who was
assay-master there soon after the works at the Upper Harz were resumed
by Duke Henry the Younger, about the year 1524. This we learn from the
papers of Herdan Hacke or Haecke, who was preacher at Wildenmann in
1572."

In view of the great amount of direct and indirect reference to tin
mining in Cornwall, covering four centuries prior to Agricola, it would
be natural to expect some statement bearing upon the treatment of ore.
Curiously enough, while alluvial washing and smelting of the black-tin
are often referred to, there is nothing that we have been able to find,
prior to Richard Carew's "Survey of Cornwall" (London, 1602, p. 12)
which gives any tangible evidence on the technical phases of
ore-dressing. In any event, an inspection of charters, tax-rolls,
Stannary Court proceedings, etc., prior to that date gives the
impression that vein mining was a very minor portion of the source of
production. Although Carew's work dates 45 years after Agricola, his
description is of interest: "As much almost dooth it exceede credite,
that the Tynne, for and in so small quantitie digged up with so great
toyle, and passing afterwards thorow the managing of so many hands, ere
it comes to sale, should be any way able to acquite the cost: for being
once brought above ground in the stone, it is first broken in peeces
with hammers; and then carryed, either in waynes, or on horses' backs,
to a stamping mill, where three, and in some places sixe great logges of
timber, bounde at the ends with yron, and lifted up and downe by a
wheele, driven with the water, doe break it smaller. If the stones be
over-moyst, they are dried by the fire in an yron cradle or grate. From
the stamping mill, it passeth to the crazing mill, which betweene two
grinding stones, turned also with a water-wheel, bruseth the same to a
find sand; howbeit, of late times they mostly use wet stampers, and so
have no need of the crazing mills for their best stuffe, but only for
the crust of their tayles. The streame, after it hath forsaken the mill,
is made to fall by certayne degrees, one somewhat distant from another;
upon each of which, at every discent, lyeth a greene turfe, three or
foure foote square, and one foote thick. On this the Tinner layeth a
certayne portion of the sandie Tinne, and with his shovel softly tosseth
the same to and fro, that, through this stirring, the water which
runneth over it may wash away the light earth from the Tinne, which of a
heavier substance lyeth fast on the turfe. Having so clensed one
portion, he setteth the same aside, and beginneth with another, until
his labour take end with his taske. The best of those turfes (for all
sorts serve not) are fetched about two miles to the eastwards of S.
Michael's Mount, where at low water they cast aside the sand, and dig
them up; they are full of rootes of trees, and on some of them nuts have
been found, which confirmeth my former assertion of the sea's intrusion.
After it is thus washed, they put the remnant into a wooden dish, broad,
flat, and round, being about two foote over, and having two handles
fastened at the sides, by which they softly shogge the same to and fro
in the water betweene their legges, as they sit over it, untill
whatsoever of the earthie substance that was yet left be flitted away.
Some of later time, with a sleighter invention, and lighter labour, doe
cause certayne boyes to stir it up and down with their feete, which
worketh the same effect; the residue, after this often clensing, they
call Blacke Tynne."

It will be noticed that the "wet stampers" and the buddle--worked with
"boyes feete"--are "innovations of late times." And the interesting
question arises as to whether Cornwall did not derive the stamp-mill,
buddle, and strake, from the Germans. The first adequate detailed
description of Cornish appliances is that of Pryce (_Mineralogia
Cornubiensis_, London, 1778) where the apparatus is identical with that
described by Agricola 130 years before. The word "stamper" of Cornwall
is of German origin, from _stampfer_, or, as it is often written in old
German works, _stamper_. However, the pursuit of the subject through
etymology ends here, for no derivatives in German can be found for
buddle, tye, strake, or other collateral terms. The first tangible
evidence of German influence is to be found in Carew who, continuing
after the above quotation, states: "But sithence I gathered stickes to
the building of this poore nest, Sir Francis Godolphin (whose kind helpe
hath much advanced this my playing labour) entertained a Dutch Mynerall
man, and taking light from his experience, but building thereon farre
more profitable conclusions of his owne invention, hath practised a more
saving way in these matters, and besides, made Tynne with good profit of
that refuse which Tynners rejected as nothing worth." Beyond this
quotation we can find no direct evidence of the influence of "Dutch
Mynerall men" in Cornish tin mining at this time. There can be no doubt,
however, that in copper mining in Cornwall and elsewhere in England, the
"Dutch Mynerall men" did play a large part in the latter part of the
16th Century. Pettus (_Fodinae Regales_, London, 1670, p. 20) states that
"about the third year of Queen Elizabeth (1561) she by the advice of her
Council sent over for some Germans experienced in mines, and being
supplied, she, on the tenth of October, in the sixth of her reign,
granted the mines of eight counties ... to Houghsetter, a German whose
name and family still continue in Cardiganshire." Elizabeth granted
large mining rights to various Germans, and the opening paragraphs of
two out of several Charters may be quoted in point. This grant is dated
1565, and in part reads: "ELIZABETH, by the Grace of God, Queen of
England, France, and Ireland, Defender of the Faith, &c. To all Men to
whom these Letters Patents shall come, Greeting. Where heretofore we
have granted Privileges to Cornelius de Voz, for the Mining and Digging
in our Realm of England, for Allom and Copperas, and for divers Ewers of
Metals that were to be found in digging for the said Allom and Copperas,
incidently and consequently without fraud or guile, as by the same our
Privilege may appear. And where we also moved, by credible Report to us
made, of one Daniel Houghsetter, a German born, and of his Skill and
Knowledge of and in all manner of Mines, of Metals and Minerals, have
given and granted Privilege to Thomas Thurland, Clerk, one of our
Chaplains, and Master of the Hospital of Savoy, and to the same Daniel,
for digging and mining for all manner of Ewers of Gold, Silver, Copper,
and Quicksilver, within our Counties of York, Lancaster, Cumberland,
Westmorland, Cornwall, Devon, Gloucester, and Worcester, and within our
Principality of Wales; and with the same further to deal, as by our said
Privilege thereof granted and made to the said Thomas Thurland and
Daniel Houghsetter may appear. _And_ we now being minded that the said
Commodities, and all other Treasures of the Earth, in all other Places
of our Realm of England...." On the same date another grant reads:
"ELIZABETH, by the Grace of God, Queen of England, France, and Ireland,
Defender of the Faith, &c. To all Men to whom these our Letters Patents
shall come, Greeting. Where we have received credible Information that
our faithful and well-beloved Subject William Humfrey, Saymaster of our
Mint within our Tower of London, by his great Endeavour, Labour, and
Charge, hath brought into this our Realm of England one Christopher
Shutz, an Almain, born at _St. Annen Berg_, under the Obedience of the
Electer of Saxony; a Workman as it is reported, of great Cunning,
Knowledge, and Experience, as well in the finding of the Calamin Stone,
call'd in Latin, _lapis calaminaris_, and in the right and proper use
and commodity thereof, for the Composition of the mix'd Metal commonly
call'd _latten_, etc." Col. Grant-Francis, in his most valuable
collection (Smelting of Copper in the Swansea District, London, 1881)
has published a collection of correspondence relating to early mining
and smelting operations in Great Britain. And among them (p. 1., etc.)
are letters in the years 1583-6 from William Carnsewe and others to
Thomas Smyth, with regard to the first smelter erected at Neath, which
was based upon copper mines in Cornwall. He mentions "Mr. Weston's (a
partner) provydence in bringynge hys Dutch myners hether to aplye such
businys in this countrye ys more to be commendyd than his ignorance of
our countrymen's actyvytyes in suche matters." The principal "Dutche
Mineral Master" referred to was one Ulrick Frosse, who had charge of the
mine at Perin Sands in Cornwall, and subsequently of the smelter at
Neath. Further on is given (p. 25) a Report by Jochim Gaunse upon the
Smelting of copper ores at Keswick in Cumberland in 1581, referred to in
note 2, p. 267. The Daniel Hochstetter mentioned in the Charter above,
together with other German and English gentlemen, formed the "Company of
Mines Royal" and among the properties worked were those with which
Gaunse's report is concerned. There is in the Record Office, London
(Exchequer K.R. Com. Derby 611. Eliz.) the record of an interesting
inquisition into Derbyshire methods in which a then recent great
improvement was the jigging sieve, the introduction of which was due to
William Humphrey (mentioned above). It is possible that he learned of it
from the German with whom he was associated. Much more evidence of the
activity of the Germans in English mining at this period can be adduced.

On the other hand, Cornwall has laid claims to having taught the art of
tin mining and metallurgy to the Germans. Matthew Paris, a Benedictine
monk, by birth an Englishman, who died in 1259, relates (_Historia Major
Angliae_, London, 1571) that a Cornishman who fled to Germany on account
of a murder, first discovered tin there in 1241, and that in consequence
the price of tin fell greatly. This statement is recalled with great
persistence by many writers on Cornwall. (Camden, _Britannia_, London,
1586; Borlase, Natural History of Cornwall, Oxford, 1758; Pryce,
_Mineralogia Cornubiensis_, London, 1778, p. 70, and others).

[11] _Lapidibus liquescentibus_. (See note 15, p. 380).

[12] HISTORICAL NOTE ON AMALGAMATION. The recovery of gold by the use of
mercury possibly dates from Roman times, but the application of the
process to silver does not seem to go back prior to the 16th Century.
Quicksilver was well-known to the Greeks, and is described by
Theophrastus (105) and others (see note 58, p. 432, on quicksilver).
However, the Greeks made no mention of its use for amalgamation, and, in
fact, Dioscorides (V, 70) says "it is kept in vessels of glass, lead,
tin or silver; if kept in vessels of any other kind it consumes them and
flows away." It was used by them for medicinal purposes. The Romans
amalgamated gold with mercury, but whether they took advantage of the
principle to recover gold from ores we do not know. Vitruvius (VII, 8)
makes the following statement:--"If quicksilver be placed in a vessel
and a stone of a hundred pounds' weight be placed on it, it will swim at
the top, and will, notwithstanding its weight, be incapable of pressing
the liquid so as to break or separate it. If this be taken out, and only
a single scruple of gold be put in, that will not swim, but immediately
descend to the bottom. This is a proof that the gravity of a body does
not depend on its weight, but on its nature. Quicksilver is used for
many purposes; without it, neither silver nor brass can be properly
gilt. When gold is embroidered on a garment which is worn out and no
longer fit for use, the cloth is burnt over the fire in earthen pots;
the ashes are thrown into water and quicksilver added to them; this
collects all the particles of gold and unites with them. The water is
then poured off and the residuum placed in a cloth, which, when squeezed
with the hands, suffers the liquid quicksilver to pass through the pores
of the cloth, but retains the gold in a mass within it." (Gwilt's
Trans., p. 217). Pliny is rather more explicit (XXXIII, 32): "All floats
on it (quicksilver) except gold. This it draws into itself, and on that
account is the best means of purifying; for, on being repeatedly
agitated in earthen pots it casts out the other things and the
impurities. These things being rejected, in order that it may give up
the gold, it is squeezed in prepared skins, through which, exuding like
perspiration, it leaves the gold pure." It may be noted particularly
that both these authors state that gold is the only substance that does
not float, and, moreover, nowhere do we find any reference to silver
combining with mercury, although Beckmann (Hist. of Inventions, Vol. I,
p. 14) not only states that the above passage from Pliny refers to
silver, but in further error, attributes the origin of silver
amalgamation of ores to the Spaniards in the Indies.

The Alchemists of the Middle Ages were well aware that silver would
amalgamate with mercury. There is, however, difficulty in any conclusion
that it was applied by them to separating silver or gold from ore. The
involved gibberish in which most of their utterances was couched,
obscures most of their reactions in any event. The School of Geber
(Appendix B) held that all metals were a compound of "spiritual" mercury
and sulphur, and they clearly amalgamated silver with mercury, and
separated them by distillation. The _Probierbuechlein_ (1520?) describes
a method of recovering silver from the cement used in parting gold and
silver, by mixing the cement (silver chlorides) with quicksilver.
Agricola nowhere in this work mentions the treatment of silver ores by
amalgamation, although he was familiar with Biringuccio (_De La
Pirotechnia_), as he himself mentions in the Preface. This work,
published at least ten years before _De Re Metallica_, contains the
first comprehensive account of silver amalgamation. There is more than
usual interest in the description, because, not only did it precede _De
Re Metallica_, but it is also a specific explanation of the fundamental
essentials of the Patio Process long before the date when the Spaniards
could possibly have invented that process in Mexico. We quote Mr. A.
Dick's translation from Percy (Metallurgy of Silver and Gold, p. 560):

"He was certainly endowed with much useful and ingenious thought who
invented the short method of extracting metal from the sweepings
produced by those arts which have to do with gold and silver, every
substance left in the refuse by smelters, and also the substance from
certain ores themselves, without the labour of fusing, but by the sole
means and virtue of mercury. To effect this, a large basin is first
constructed of stone or timber and walled, into which is fitted a
millstone made to turn like that of a mill. Into the hollow of this
basin is placed matter containing gold (_della materia vra che tiene
oro_), well ground in a mortar and afterward washed and dried; and, with
the above-mentioned millstone, it is ground while being moistened with
vinegar, or water, in which has been dissolved corrosive sublimate
(_solimato_), verdigris (_verde rame_), and common salt. Over these
materials is then put as much mercury as will cover them; they are then
stirred for an hour or two, by turning the millstone, either by hand, or
horse-power, according to the plan adopted, bearing in mind that the
more the mercury and the materials are bruised together by the
millstone, the more the mercury may be trusted to have taken up the
substance which the materials contain. The mercury, in this condition,
can then be separated from the earthy matter by a sieve, or by washing,
and thus you will recover the auriferous mercury (_el vro mercurio_).
After this, by driving off the mercury by means of a flask (_i.e._, by
heating in a retort or an alembic), or by passing it through a bag,
there will remain, at the bottom, the gold, silver, or copper, or
whatever metal was placed in the basin under the millstone to be ground.
Having been desirous of knowing this secret, I gave to him who taught it
to me a ring with a diamond worth 25 ducats; he also required me to give
him the eighth part of any profit I might make by using it. This I
wished to tell you, not that you should return the ducats to me for
teaching you the secret, but in order that you should esteem it all the
more and hold it dear."

In another part of the treatise Biringuccio states that washed
(concentrated) ores may be ultimately reduced either by lead or mercury.
Concerning these silver concentrates he writes: "Afterward drenching
them with vinegar in which has been put green copper (_i.e._,
verdigris); or drenching them with water in which has been dissolved
vitriol and green copper...." He next describes how this material should
be ground with mercury. The question as to who was the inventor of
silver amalgamation will probably never be cleared up. According to
Ulloa (_Relacion Historica Del Viage a la America Meridional_, Madrid,
1748) Dom Pedro Fernandes De Velasco discovered the process in Mexico in
1566. The earliest technical account is that of Father Joseph De Acosta
(_Historia Natural y Moral de las Indias_, Seville, 1590, English trans.
Edward Grimston, London, 1604, re-published by the Hakluyt Society,
1880). Acosta was born in 1540, and spent the years 1570 to 1585 in
Peru, and 1586 in Mexico. It may be noted that Potosi was discovered in
1545. He states that refining silver with mercury was introduced at
Potosi by Pedro Fernandes de Velasco from Mexico in 1571, and states
(Grimston's Trans., Vol. I, p. 219): "... They put the powder of the
metall into the vessels upon furnaces, whereas they anoint it and
mortifie it with brine, putting to every fiftie quintalles of powder
five quintalles of salt. And this they do for that the salt separates
the earth and filth, to the end the quicksilver may the more easily draw
the silver unto it. After, they put quicksilver into a piece of holland
and presse it out upon the metall, which goes forth like a dewe, alwaies
turning and stirring the metall, to the end it may be well incorporate.
Before the invention of these furnaces of fire, they did often mingle
their metall with quicksilver in great troughes, letting it settle some
daies, and did then mix it and stirre it againe, until they thought all
the quicksilver were well incorporate with the silver, the which
continued twentie daies and more, and at least nine daies." Frequent
mention of the different methods of silver amalgamation is made by the
Spanish writers subsequent to this time, the best account being that of
Alonso Barba, a priest. Barba was a native of Lepe, in Andalusia, and
followed his calling at various places in Peru from about 1600 to about
1630, and at one time held the Curacy of St. Bernard at Potosi. In 1640
he published at Madrid his _Arte de los Metales_, etc., in five books.
The first two books of this work were translated into English by the
Earl of Sandwich, and published in London in 1674, under the title "The
First Book of the Art of Metals." This translation is equally wretched
with those in French and German, as might be expected from the
translators' total lack of technical understanding. Among the methods of
silver amalgamation described by Barba is one which, upon later
"discovery" at Virginia City, is now known as the "Washoe Process." None
of the Spanish writers, so far as we know, make reference to
Biringuccio's account, and the question arises whether the Patio Process
was an importation from Europe or whether it was re-invented in Mexico.
While there is no direct evidence on the point, the presumption is in
favour of the former.

The general introduction of the amalgamation of silver ores into Central
Europe seems to have been very slow, and over 200 years elapsed after
its adoption in Peru and Mexico before it received serious attention by
the German Metallurgists. Ignaz Elder v. Born was the first to establish
the process effectually in Europe, he having in 1784 erected a
"quick-mill" at Glasshutte, near Shemnitz. He published an elaborate
account of a process which he claimed as his own, under the title _Ueber
das Anquicken der Gold und Silberhaeltigen Erze_, Vienna, 1786. The only
thing new in his process seems to have been mechanical agitation.
According to Born, a Spaniard named Don Juan de Corduba, in the year
1588, applied to the Court at Vienna offering to extract silver from
ores with mercury. Various tests were carried out under the celebrated
Lazarus Erckern, and although it appears that some vitriol and salt were
used, the trials apparently failed, for Erckern concluded his report
with the advice: "That their Lordships should not suffer any more
expense to be thrown away upon this experiment." Born's work was
translated into English by R. E. Raspe, under the title--"Baron Inigo
Born's New Process of Amalgamation, etc.," London, 1791. Some interest
attaches to Raspe, in that he was not only the author of "Baron
Munchausen," but was also the villain in Scott's "Antiquary." Raspe was
a German Professor at Cassel, who fled to England to avoid arrest for
theft. He worked at various mines in Cornwall, and in 1791 involved Sir
John Sinclair in a fruitless mine, but disappeared before that was
known. The incident was finally used by Sir Walter Scott in this novel.

[13] _Aurum in ea remanet purum_. This same error of assuming squeezed
amalgam to be pure gold occurs in Pliny; see previous footnote.

[14] George, Duke of Saxony, surnamed "The Bearded," was born 1471, and
died 1539. He was chiefly known for his bitter opposition to the
Reformation.

[15] The Julian Alps are a section east of the Carnic Alps and lie north
of Trieste. The term Rhaetian Alps is applied to that section along the
Swiss Italian Boundary, about north of Lake Como.

[16] Ancient Lusitania comprised Portugal and some neighbouring portions
of Spain.

[17] Colchis, the traditional land of the Golden Fleece, lay between the
Caucasus on the north, Armenia on the south, and the Black Sea on the
west. If Agricola's account of the metallurgical purpose of the fleece
is correct, then Jason must have had real cause for complaint as to the
tangible results of his expedition. The fact that we hear nothing of the
fleece after the day it was taken from the dragon would thus support
Agricola's theory. Tons of ink have been expended during the past thirty
centuries in explanations of what the fleece really was. These
explanations range through the supernatural and metallurgical, but more
recent writers have endeavoured to construct the journey of the
Argonauts into an epic of the development of the Greek trade in gold
with the Euxine. We will not attempt to traverse them from a
metallurgical point of view further than to maintain that Agricola's
explanation is as probable and equally as ingenious as any other,
although Strabo (XI, 2, 19.) gives much the same view long before.

Alluvial mining--gold washing--being as old as the first glimmer of
civilization, it is referred to, directly or indirectly, by a great
majority of ancient writers, poets, historians, geographers, and
naturalists. Early Egyptian inscriptions often refer to this industry,
but from the point of view of technical methods the description by Pliny
is practically the only one of interest, and in Pliny's chapter on the
subject, alluvial is badly confused with vein mining. This passage
(XXXIII, 21) is as follows: "Gold is found in the world in three ways,
to say nothing of that found in India by the ants, and in Scythia by the
Griffins. The first is as gold dust found in streams, as, for instance,
in the Tagus in Spain, in the Padus in Italy, in the Hebrus in Thracia,
in the Pactolus in Asia, and in the Ganges in India; indeed, there is no
gold found more perfect than this, as the current polishes it thoroughly
by attrition.... Others by equal labour and greater expense bring rivers
from the mountain heights, often a hundred miles, for the purpose of
washing this debris. The ditches thus made are called _corrugi_, from
our word _corrivatio_, I suppose; and these entail a thousand fresh
labours. The fall must be steep, that the water may rush down from very
high places, rather than flow gently. The ditches across the valleys are
joined by aqueducts, and in other places, impassable rocks have to be
cut away and forced to make room for troughs of hollowed-out logs. Those
who cut the rocks are suspended by ropes, so that to those who watch
them from a distance, the workmen seem not so much beasts as birds.
Hanging thus, they take the levels and trace the lines which the ditch
is to take; and thus, where there is no place for man's footstep,
streams are dragged by men. The water is vitiated for washing if the
current of the stream carries mud with it. This kind of earth is called
_urium_, hence these ditches are laid out to carry the water over beds
of pebbles to avoid this _urium_. When they have reached the head of the
fall, at the top of the mountain, reservoirs are excavated a couple of
hundred feet long and wide, and about ten feet deep. In these reservoirs
there are generally five gates left, about three feet square, so that
when the reservoir is full, the gates are opened, and the torrent bursts
forth with such violence that the rocks are hurled along. When they have
reached the plain there is yet more labour. Trenches called _agogae_ are
dug for the flow of the water. The bottoms of these are spread at
regular intervals with _ulex_ to catch the gold. This _ulex_ is similar
to rosemary, rough and prickly. The sides, too, are closed in with
planks and are suspended when crossing precipitous spots. The earth is
carried to the sea and thus the shattered mountain is washed away and
scattered; and this deposition of the earth in the sea has extended the
shore of Spain.... The gold procured from _arrugiae_ does not require to
be melted, but is already pure gold. It is found in lumps, in shafts as
well, sometimes even exceeding ten _librae_ in weight. These lumps are
called _palagae_ and _palacurnae_, while the small grains are called
_baluce_. The Ulex is dried and burnt and the ashes are washed on a bed
of grassy turf in order that the gold may settle thereon."

[19] _Carbunculus Carchedonius_--Carthaginian carbuncle. The German is
given by Agricola in the _Interpretatio_ as _granat_, _i.e._, garnet.

[20] As the concentration of crushed tin ore has been exhaustively
treated of already, the descriptions from here on probably refer
entirely to alluvial tin.

[21] From a metallurgical point of view all of these operations are
roasting. Even to-day, however, the expression "burning" tin is in use
in some parts of Cornwall, and in former times it was general.

[22] There can be no doubt that these are mattes, as will develop in
Book IX. The German term in the Glossary for _panes ex pyrite_ is
_stein_, the same as the modern German for matte. Orpiment and realgar
are the yellow and red arsenical sulphides. The _cadmia_ was no doubt
the cobalt-arsenic minerals (see note on p. 112). The "solidified
juices" were generally anything that could be expelled short of
smelting, _i.e._, roasted off or leached out, as shown in note 4, p. 1;
they embrace the sulphates, salts, sulphur, bitumen, and arsenical
sulphides, etc. For further information on leaching out the sulphates,
alum, etc., see note 10, p. 564.




BOOK IX.[1]


Since I have written of the varied work of preparing the ores, I will
now write of the various methods of smelting them. Although those who
burn, roast and calcine[2] the ore, take from it something which is
mixed or combined with the metals; and those who crush it with stamps
take away much; and those who wash, screen and sort it, take away still
more; yet they cannot remove all which conceals the metal from the eye
and renders it crude and unformed. Wherefore smelting is necessary, for
by this means earths, solidified juices, and stones are separated from
the metals so that they obtain their proper colour and become pure, and
may be of great use to mankind in many ways. When the ore is smelted,
those things which were mixed with the metal before it was melted are
driven forth, because the metal is perfected by fire in this manner.
Since metalliferous ores differ greatly amongst themselves, first as to
the metals which they contain, then as to the quantity of the metal
which is in them, and then by the fact that some are rapidly melted by
fire and others slowly, there are, therefore, many methods of smelting.
Constant practice has taught the smelters by which of these methods
they can obtain the most metal from any one ore. Moreover, while
sometimes there are many methods of smelting the same ore, by which an
equal weight of metal is melted out, yet one is done at a greater cost
and labour than the others. Ore is either melted with a furnace or
without one; if smelted with a furnace the tap-hole is either
temporarily closed or always open, and if smelted without a furnace, it
is done either in pots or in trenches. But in order to make this matter
clearer, I will describe each in detail, beginning with the buildings
and the furnaces.

A wall which will be called the "second wall" is constructed of brick
or stone, two feet and as many palms thick, in order that it may be
strong enough to bear the weight. It is built fifteen feet high, and its
length depends on the number of furnaces which are put in the works;
there are usually six furnaces, rarely more, and often less. There are
three furnace walls, a back one which is against the "second" wall, and
two side ones, of which I will speak later. These should be made of
natural stone, as this is more serviceable than burnt bricks, because
bricks soon become defective and crumble away, when the smelter or his
deputy chips off the accretions which adhere to the walls when the ore
is smelted. Natural stone resists injury by the fire and lasts a long
time, especially that which is soft and devoid of cracks; but, on the
contrary, that which is hard and has many cracks is burst asunder by the
fire and destroyed. For this reason, furnaces which are made of the
latter are easily weakened by the fire, and when the accretions are
chipped off they crumble to pieces. The front furnace wall should be
made of brick, and there should be in the lower part a mouth three palms
wide and one and a half feet high, when the hearth is completed. A hole
slanting upward, three palms long, is made through the back furnace
wall, at the height of a cubit, before the hearth has been prepared;
through this hole and a hole one foot long in the "second" wall--as the
back of this wall has an arch--is inserted a pipe of iron or bronze, in
which are fixed the nozzles of the bellows. The whole of the front
furnace wall is not more than five feet high, so that the ore may be
conveniently put into the furnace, together with those things which the
master needs for his work of smelting. Both the side walls of the
furnace are six feet high, and the back one seven feet, and they are
three palms thick. The interior of the furnace is five palms wide, six
palms and a digit long, the width being measured by the space which lies
between the two side walls, and the length by the space between the
front and the back walls; however, the upper part of the furnace widens
out somewhat.

[Illustration 357 (Blast Furnaces): A--Furnaces. B--Forehearths.]

There are two doors in the second wall if there are six furnaces, one of
the doors being between the second and third furnaces and the other
between the fourth and fifth furnaces. They are a cubit wide and six
feet high, in order that the smelters may not have mishaps in coming and
going. It is necessary to have a door to the right of the first furnace,
and similarly one to the left of the last, whether the wall is longer or
not. The second wall is carried further when the rooms for the
cupellation furnaces, or any other building, adjoin the rooms for the
blast furnaces, these buildings being only divided by a partition. The
smelter, and the ones who attend to the first and the last furnaces, if
they wish to look at the bellows or to do anything else, go out through
the doors at the end of the wall, and the other people go through the
other doors, which are the common ones. The furnaces are placed at a
distance of six feet from one another, in order that the smelters and
their assistants may more easily sustain the fierceness of the heat.
Inasmuch as the interior of each furnace is five palms wide and each is
six feet distant from the other, and inasmuch as there is a space of
four feet three palms at the right side of the first furnace and as much
at the left side of the last furnace, and there are to be six furnaces
in one building, then it is necessary to make the second wall fifty-two
feet long; because the total of the widths of all of the furnaces is
seven and a half feet, the total of the spaces between the furnaces is
thirty feet, the space on the outer sides of the first and last furnaces
is nine feet and two palms, and the thickness of the two transverse
walls is five feet, which make a total measurement of fifty-two feet.[3]

Outside each furnace hearth there is a small pit full of powder which is
compressed by ramming, and in this manner is made the forehearth which
receives the metal flowing from the furnaces. Of this I will speak
later.

[Illustration 358 (Blast Furnaces): A--Furnaces. B--Forehearth. C--Door.
D--Water tank. E--Stone which covers it. F--Material of the vent walls.
G--Stone which covers it. H--Pipe exhaling the vapour.]

Buried about a cubit under the forehearth and the hearth of the furnace
is a transverse water-tank, three feet long, three palms wide and a
cubit deep. It is made of stone or brick, with a stone cover, for if it
were not covered, the heat would draw the moisture from below and the
vapour might be blown into the hearth of the furnace as well as into the
forehearth, and would dampen the blast. The moisture would vitiate the
blast, and part of the metal would be absorbed and part would be mixed
with the slags, and in this manner the melting would be greatly damaged.
From each water-tank is built a walled vent, to the same depth as the
tank, but six digits wide; this vent slopes upward, and sooner or
later penetrates through to the other side of the wall, against which
the furnace is built. At the end of this vent there is an opening where
the steam, into which the water has been converted, is exhausted through
a copper or iron tube or pipe. This method of making the tank and the
vent is much the best. Another kind has a similar vent but a different
tank, for it does not lie transversely under the forehearth, but
lengthwise; it is two feet and a palm long, and a foot and three palms
wide, and a foot and a palm deep. This method of making tanks is not
condemned by us, as is the construction of those tanks without a vent;
the latter, which have no opening into the air through which the vapour
may discharge freely, are indeed to be condemned.

[Illustration 359 (Bellows for blast furnaces)]

Fifteen feet behind the second wall is constructed the first wall,
thirteen feet high. In both of these are fixed roof beams[4], which are
a foot wide and thick, and nineteen feet and a palm long; these are
placed three feet distant from one another. As the second wall is two
feet higher than the first wall, recesses are cut in the back of it two
feet high, one foot wide, and a palm deep, and in these recesses, as it
were in mortises, are placed one end of each of the beams. Into these
ends are mortised the bottoms of just as many posts; these posts are
twenty-four feet high, three palms wide and thick, and from the tops of
the posts the same number of rafters stretch downward to the ends of the
beams superimposed on the first wall; the upper ends of the rafters are
mortised into the posts and the lower ends are mortised into the ends of
the beams laid on the first wall; the rafters support the roof, which
consists of burnt tiles. Each separate rafter is propped up by a
separate timber, which is a cross-beam, and is joined to its post.
Planks close together are affixed to the posts above the furnaces; these
planks are about two digits thick and a palm wide, and they, together
with the wicker work interposed between the timbers, are covered with
lute so that there may be no risk of fire to the timbers and
wicker-work. In this practical manner is constructed the back part of
the works, which contains the bellows, their frames, the mechanism for
compressing the bellows, and the instrument for distending them, of all
of which I will speak hereafter.

[Illustration 361 (Plan of Smelter Building): The four long walls:
A--First. B--Second. C--Third. D--Fourth. The seven transverse walls:
E--First. F--Second. G--Third. H--Fourth. I--Fifth. K--Sixth.
L--Seventh, or middle.]

In front of the furnaces is constructed the third long wall and likewise
the fourth. Both are nine feet high, but of the same length and
thickness as the other two, the fourth being nine feet distant from the
third; the third is twenty-one and a half feet from the second. At a
distance of twelve feet from the second wall, four posts seven and a
half feet high, a cubit wide and thick, are set upon rock laid
underneath. Into the tops of the posts the roof beam is mortised; this
roof beam is two feet and as many palms longer than the distance between
the second and the fifth transverse walls, in order that its ends may
rest on the transverse walls. If there should not be so long a beam at
hand, two are substituted for it. As the length of the long beam is as
above, and as the posts are equidistant, it is necessary that the posts
should be a distance of nine feet, one palm, two and two-fifths digits
from each other, and the end ones this distance from the transverse
walls. On this longitudinal beam and to the third and fourth walls are
fixed twelve secondary beams twenty-four feet long, one foot wide, three
palms thick, and distant from each other three feet, one palm, and two
digits. In these secondary beams, where they rest on the longitudinal
beams, are mortised the ends of the same number of rafters as there are
posts which stand on the second wall. The ends of the rafters do not
reach to the tops of the posts, but are two feet away from them, that
through this opening, which is like the open part of a forge, the
furnaces can emit their fumes. In order that the rafters should not fall
down, they are supported partly by iron rods, which extend from each
rafter to the opposite post, and partly supported by a few tie-beams,
which in the same manner extend from some rafters to the posts opposite,
and give them stability. To these tie-beams, as well as to the rafters
which face the posts, a number of boards, about two digits thick and a
palm wide, are fixed at a distance of a palm from each other, and are
covered with lute so that they do not catch fire. In the secondary
beams, where they are laid on the fourth wall, are mortised the lower
ends of the same number of rafters as those in a set of rafters[5]
opposite them. From the third long wall these rafters are joined and
tied to the ends of the opposite rafters, so that they may not slip, and
besides they are strengthened with substructures which are made of cross
and oblique timbers. The rafters support the roof.

In this manner the front part of the building is made, and is divided
into three parts; the first part is twelve feet wide and is under the
hood, which consists of two walls, one vertical and one inclined. The
second part is the same number of feet wide and is for the reception of
the ore to be smelted, the fluxes, the charcoal, and other things which
are needed by the smelter. The third part is nine feet wide and contains
two separate rooms of equal size, in one of which is the assay furnace,
while the other contains the metal to be melted in the cupellation
furnaces. It is thus necessary that in the building there should be,
besides the four long walls, seven transverse walls, of which the first
is constructed from the upper end of the first long wall to the upper
end of the second long wall; the second proceeds from the end of this to
the end of the third long wall; the third likewise from this end of the
last extends to the end of the fourth long wall; the fourth leads from
the lower end of the first long wall to the lower end of the second long
wall; the fifth extends from the end of this to the end of the third
long wall; the sixth extends from this last end to the end of the fourth
long wall; the seventh divides into two parts the space between the
third and fourth long walls.

To return to the back part of the building, in which, as I said, are the
bellows[6], their frames, the machinery for compressing them, and the
instrument for distending them. Each bellows consists of a body and a
head. The body is composed of two "boards," two bows, and two hides. The
upper board is a palm thick, five feet and three palms long, and two and
a half feet wide at the back part, where each of the sides is a little
curved, and it is a cubit wide at the front part near the head. The
whole of the body of the bellows tapers toward the head. That which we
now call the "board" consists of two pieces of pine, joined and glued
together, and of two strips of linden wood which bind the edges of the
board, these being seven digits wide at the back, and in front near the
head of the bellows one and a half digits wide. These strips are glued
to the boards, so that there shall be less damage from the iron nails
driven through the hide. There are some people who do not surround the
boards with strips, but use boards only, which are very thick. The upper
board has an aperture and a handle; the aperture is in the middle of the
board and is one foot three palms distant from where the board joins the
head of the bellows, and is six digits long and four wide. The lid for
this aperture is two palms and a digit long and wide, and three digits
thick; toward the back of the lid is a little notch cut into the surface
so that it may be caught by the hand; a groove is cut out of the top of
the front and sides, so that it may engage in mouldings a palm wide and
three digits thick, which are also cut out in a similar manner under the
edges. Now, when the lid is drawn forward the hole is closed, and when
drawn back it is opened; the smelter opens the aperture a little so that
the air may escape from the bellows through it, if he fears the hides
might be burst when the bellows are too vigorously and quickly inflated;
he, however, closes the aperture if the hides are ruptured and the air
escapes. Others perforate the upper board with two or three round holes
in the same place as the rectangular one, and they insert plugs in them
which they draw out when it is necessary. The wooden handle is seven
palms long, or even longer, in order that it may extend outside;
one-half of this handle, two palms wide and one thick, is glued to the
end of the board and fastened with pegs covered with glue; the other
half projects beyond the board, and is rounded and seven digits thick.
Besides this, to the handle and to the board is fixed a cleat two feet
long, as many palms wide and one palm thick, and to the under side of
the same board, at a distance of three palms from the end, is fixed
another cleat two feet long, in order that the board may sustain the
force of distension and compression; these two cleats are glued to the
board, and are fastened to it with pegs covered with glue.

The lower bellows-board, like the upper, is made of two pieces of pine
and of two strips of linden wood, all glued together; it is of the same
width and thickness as the upper board, but is a cubit longer, this
extension being part of the head of which I have more to say a little
later. This lower bellows-board has an air-hole and an iron ring. The
air-hole is about a cubit distant from the posterior end, and it is
midway between the sides of the bellows-board, and is a foot long and
three palms wide; it is divided into equal parts by a small rib which
forms part of the board, and is not cut from it; this rib is a palm long
and one-third of a digit wide. The flap of the air-hole is a foot and
three digits long, three palms and as many digits wide; it is a thin
board covered with goat skin, the hairy part of which is turned toward
the ground. There is fixed to one end of the flap, with small iron
nails, one-half of a doubled piece of leather a palm wide and as long as
the flap is wide; the other half of the leather, which is behind the
flap, is twice perforated, as is also the bellows-board, and these
perforations are seven digits apart. Passing through these a string is
tied on the under side of the board; and thus the flap when tied to the
board does not fall away. In this manner are made the flap and the
air-hole, so when the bellows are distended the flap opens, when
compressed it closes. At a distance of about a foot beyond the air-hole
a slightly elliptical iron ring, two palms long and one wide, is
fastened by means of an iron staple to the under part of the
bellows-board; it is at a distance of three palms from the back of the
bellows. In order that the lower bellows-board may remain stationary, a
wooden bolt is driven into the ring, after it penetrates through the
hole in the transverse supporting plank which forms part of the frame
for the bellows. There are some who dispense with the ring and fasten
the bellows-board to the frame with two iron screws something like
nails.

The bows are placed between the two boards and are of the same length as
the upper board. They are both made of four pieces of linden wood three
digits thick, of which the two long ones are seven digits wide at the
back and two and a half at the front; the third piece, which is at the
back, is two palms wide. The ends of the bows are a little more than a
digit thick, and are mortised to the long pieces, and both having been
bored through, wooden pegs covered with glue are fixed in the holes;
they are thus joined and glued to the long pieces. Each of the ends is
bowed (_arcuatur_) to meet the end of the long part of the bow, whence
its name "bow" originated. The fourth piece keeps the ends of the bow
distended, and is placed a cubit distant from the head of the bellows;
the ends of this piece are mortised into the ends of the bow and are
joined and glued to them; its length without the tenons is a foot, and
its width a palm and two digits. There are, besides, two other very
small pieces glued to the head of the bellows and to the lower board,
and fastened to them by wooden pegs covered with glue, and they are
three palms and two digits long, one palm high, and a digit thick, one
half being slightly cut away. These pieces keep the ends of the bow away
from the hole in the bellows-head, for if they were not there, the ends,
forced inward by the great and frequent movement, would be broken.

The leather is of ox-hide or horse-hide, but that of the ox is far
preferable to that of the horse. Each of these hides, for there are two,
is three and a half feet wide where they are joined at the back part of
the bellows. A long leathern thong is laid along each of the
bellows-boards and each of the bows, and fastened by T-shaped iron nails
five digits long; each of the horns of the nails is two and a half
digits long and half a digit wide. The hide is attached to the
bellows-boards by means of these nails, so that a horn of one nail
almost touches the horn of the next; but it is different with the bows,
for the hide is fastened to the back piece of the bow by only two nails,
and to the two long pieces by four nails. In this practical manner they
put ten nails in one bow and the same number in the other. Sometimes
when the smelter is afraid that the vigorous motion of the bellows may
pull or tear the hide from the bows, he also fastens it with little
strips of pine by means of another kind of nail, but these strips cannot
be fastened to the back pieces of the bow, because these are somewhat
bent. Some people do not fix the hide to the bellows-boards and bows by
iron nails, but by iron screws, screwed at the same time through strips
laid over the hide. This method of fastening the hide is less used than
the other, although there is no doubt that it surpasses it in
excellence.

Lastly, the head of the bellows, like the rest of the body, consists of
two boards, and of a nozzle besides. The upper board is one cubit long,
one and a half palms thick. The lower board is part of the whole of the
lower bellows-board; it is of the same length as the upper piece, but a
palm and a digit thick. From these two glued together is made the head,
into which, when it has been perforated, the nozzle is fixed. The back
part of the head, where it is attached to the rest of the bellows-body,
is a cubit wide, but three palms forward it becomes two digits narrower.
Afterward it is somewhat cut away so that the front end may be rounded,
until it is two palms and as many digits in diameter, at which point it
is bound with an iron ring three digits wide.

The nozzle is a pipe made of a thin plate of iron; the diameter in front
is three digits, while at the back, where it is encased in the head of
the bellows, it is a palm high and two palms wide. It thus gradually
widens out, especially at the back, in order that a copious wind can
penetrate into it; the whole nozzle is three feet long.

[Illustration 365 (Bellows for blast furnaces): A--Upper bellows-board.
B--Lower bellows-board. C--The two pieces of wood of which each
consists. D--Posterior arched part of each. E--Tapered front part of
each. F--Pieces of linden wood. G--Aperture in the upper board. H--Lid.
I--Little mouldings of wood. K--Handle. L--Cleat on the outside. The
cleat inside I am not able to depict. M--Interior of the lower
bellows-board. N--Part of the head. O--Air-hole. P--Supporting bar.
Q--Flap. R--Hide. S--Thong. T--Exterior of the lower board. V--Staple.
X--Ring. Y--Bow. Z--Its long pieces. AA--Back piece of the bow. BB--The
bowed ends. CC--Crossbar distending the bow. DD--The two little pieces.
EE--Hide. FF--Nail. GG--Horn of the nail. HH--A screw. II--Long thong.
KK--Head. LL--Its lower board. MM--Its upper board. NN--Nozzle. OO--The
whole of the lower bellows-board. PP--The two exterior plates of the
head hinges. QQ--Their curved piece. RR--Middle plate of the head.
SS--The two outer plates of the upper bellows-board. TT--Its middle
plate. VV--Little axle. XX--Whole bellows.]

The upper bellows-board is joined to the head of the bellows in the
following way. An iron plate[7], a palm wide and one and a half palms
long, is first fastened to the head at a distance of three digits from
the end; from this plate there projects a piece three digits long and
two wide, curved in a small circle. The other side has a similar plate.
Then in the same part of the upper board are fixed two other iron
plates, distant two digits from the edge, each of which are six digits
wide and seven long; in each of these plates the middle part is cut away
for a little more than three digits in length and for two in depth, so
that the curved part of the plates on the head corresponding to them may
fit into this cut out part. From both sides of each plate there project
pieces, three digits long and two digits wide, similarly curved into
small circles. A little iron pin is passed through these curved pieces
of the plates, like a little axle, so that the upper board of the
bellows may turn upon it. The little axle is six digits long and a
little more than a digit thick, and a small groove is cut out of the
upper board, where the plates are fastened to it, in such a manner that
the little axle when fixed to the plates may not fall out. Both plates
fastened to the bellows-board are affixed by four iron nails, of which
the heads are on the inner part of the board, whereas the points,
clinched at the top, are transformed into heads, so to speak. Each of
the other plates is fastened to the head of the bellows by means of a
nail with a wide head, and by two other nails of which the heads are on
the edge of the bellows-head. Midway between the two plates on the
bellows-board there remains a space two palms wide, which is covered by
an iron plate fastened to the board by little nails; and another plate
corresponding to this is fastened to the head between the other two
plates; they are two palms and the same number of digits wide.

The hide is common to the head as to all the other parts of the body;
the plates are covered with it, as well as the front part of the upper
bellows-board, and both the bows and the back of the head of the
bellows, so that the wind may not escape from that part of the bellows.
It is three palms and as many digits wide, and long enough to extend
from one of the sides of the lower board over the back of the upper; it
is fastened by many T-headed nails on one side to the upper board, and
on the other side to the head of the bellows, and both ends are fastened
to the lower bellows-board.

In the above manner the bellows is made. As two are required for each
furnace, it is necessary to have twelve bellows, if there are to be six
furnaces in one works.

[Illustration 368 (Bellows for blast furnaces): A--Front sill. B--Back
sill. C--Front posts. D--Their slots. E--Beam imposed upon them.
F--Higher posts. G--Their slots. H--Beam imposed upon them. I--Timber
joined in the mortises of the posts. K--Planks. L--Transverse supporting
planks. M--The holes in them. N--Pipe. O--Its front end. P--Its rear
end.]

Now it is time to describe their framework. First, two sills a little
shorter than the furnace wall are placed on the ground. The front one of
these is three palms wide and thick, and the back one three palms and
two digits. The front one is two feet distant from the back wall of the
furnace, and the back one is six feet three palms distant from the front
one. They are set into the earth, that they may remain firm; there are
some who accomplish this by means of pegs which, through several holes,
penetrate deeply into the ground.

Then twelve short posts are erected, whose lower ends are mortised into
the sill that is near the back of the furnace wall; these posts are two
feet high, exclusive of the tenons, and are three palms and the same
number of digits wide, and two palms thick. A slot one and a half palms
wide is cut through them, beginning two palms from the bottom and
extending for a height of three palms. All the posts are not placed at
the same intervals, the first being at a distance of three feet five
digits from the second, and likewise the third from the fourth, but the
second is two feet one palm and three digits from the third; the
intervals between the other posts are arranged in the same manner, equal
and unequal, of which each four pertain to two furnaces. The upper ends
of these posts are mortised into a transverse beam which is twelve feet,
two palms, and three digits long, and projects five digits beyond the
first post and to the same distance beyond the fourth; it is two palms
and the same number of digits wide, and two palms thick. Since each
separate transverse beam supports four bellows, it is necessary to have
three of them.

Behind the twelve short posts the same number of higher posts are
erected, of which each has the middle part of the lower end cut out, so
that its two resulting lower ends are mortised into the back sill; these
posts, exclusive of the tenons, are twelve feet and two palms high, and
are five palms wide and two palms thick. They are cut out from the
bottom upward, the slot being four feet and five digits high and six
digits wide. The upper ends of these posts are mortised into a long beam
imposed upon them; this long beam is placed close under the timbers
which extend from the wall at the back of the furnace to the first long
wall; the beam is three palms wide and two palms thick, and forty-three
feet long. If such a long one is not at hand, two or three may be
substituted for it, which when joined together make up that length.
These higher posts are not placed at equal distances, but the first is
at a distance of two feet three palms one digit from the second, and the
third is at the same distance from the fourth; while the second is at a
distance of one foot three palms and the same number of digits from the
third, and in the same manner the rest of the posts are arranged at
equal and unequal intervals. Moreover, there is in every post, where it
faces the shorter post, a mortise at a foot and a digit above the slot;
in these mortises of the four posts is tenoned a timber which itself has
four mortises. Tenons are enclosed in mortises in order that they may be
better joined, and they are transfixed with wooden pins. This timber is
thirteen feet three palms one digit long, and it projects beyond the
first post a distance of two palms and two digits, and to the same
number of palms and digits beyond the fourth post. It is two palms and
as many digits wide, and also two palms thick. As there are twelve posts
it is necessary to have three timbers of this kind.

On each of these timbers, and on each of the cross-beams which are laid
upon the shorter posts, are placed four planks, each nine feet long, two
palms three digits wide, and two palms one digit thick. The first plank
is five feet one palm one digit distant from the second, at the front as
well as at the back, for each separate plank is placed outside of the
posts. The third is at the same distance from the fourth, but the second
is one foot and three digits distant from the third. In the same manner
the rest of the eight planks are arranged at intervals, the fifth from
the sixth and the seventh from the eighth are at the same distances as
the first from the second and the third from the fourth; the sixth is at
the same distance from the seventh as the second from the third.

Two planks support one transverse plank six feet long, one foot wide,
one palm thick, placed at a distance of three feet and two palms from
the back posts. When there are six of these supporting planks, on each
separate one are placed two bellows; the lower bellows-boards project a
palm beyond them. From each of the bellows-boards an iron ring descends
through a hole in its supporting plank, and a wooden peg is driven into
the ring, so that the bellows-board may remain stationary, as I stated
above.

The two bellows communicate, each by its own plank, to the back of a
copper pipe in which are set both of the nozzles, and their ends are
tightly fastened in it. The pipe is made of a rolled copper or iron
plate, a foot and two palms and the same number of digits long; the
plate is half a digit thick, but a digit thick at the back. The interior
of the pipe is three digits wide, and two and a half digits high in the
front, for it is not absolutely round; and at the back it is a foot and
two palms and three digits in diameter. The plate from which the pipe is
made is not entirely joined up, but at the front there is left a crack
half a digit wide, increasing at the back to three digits. This pipe is
placed in the hole in the furnace, which, as I said, was in the middle
of the wall and the arch. The nozzles of the bellows, placed in this
pipe, are a distance of five digits from its front end.

[Illustration 370 (Bellows for blast furnaces): A--Lever which when
depressed by means of a cam compresses the bellows. B--Slots through the
posts. C--Bar. D--Iron implement with a rectangular link. E--Iron
instrument with round ring. F--Handle of bellows. G--Upper post.
H--Upper lever. I--Box with equal sides. K--Box narrow at the bottom.
L--Pegs driven into the upper lever.]

The levers are of the same number as the bellows, and when depressed by
the cams of the long axle they compress the bellows. These levers are
eight feet three palms long, one palm wide and thick, and the ends are
inserted in the slots of the posts; they project beyond the front posts
to a distance of two palms, and the same distance beyond the back posts
in order that each may have its end depressed by its two cams on the
axle. The cams not only penetrate into the slots of the back posts, but
project three digits beyond them. An iron pin is set in round holes made
through both sides of the slot of each front post, at three palms and as
many digits from the bottom; the pin penetrates the lever, which turns
about it when depressed or raised. The back of the lever for the length
of a cubit is a palm and a digit wider than the rest, and is perforated;
in this hole is engaged a bar six feet and two palms long, three digits
wide, and about one and one-half digits thick; it is somewhat hooked at
the upper end, and approaches the handle of the bellows. Under the lever
there is a nail, which penetrates through a hole in the bar, so that the
lever and bar may move together. The bar is perforated in the upper end
at a distance of six digits from the top; this hole is two palms long
and a digit wide, and in it is engaged the hook of an iron implement
which is a digit thick. At the upper part this implement has either a
round or square opening, like a link, and at the lower end is hooked;
the link is two digits high and wide and the hook is three digits long;
the middle part between the link and the hook is three palms and two
digits long. The link of this implement engages either the handle of the
bellows, or else a large ring which does engage it. This iron ring is a
digit thick, two palms wide on the inside of the upper part, and two
digits in the lower part, and this iron ring, not unlike the first one,
engages the handle of the bellows. The iron ring either has its narrower
part turned upward, and in it is engaged the ring of another iron
implement, similar to the first, whose hook, extending upward, grips the
rope fastened to the iron ring holding the end of the second lever, of
which I will speak presently; or else the iron ring grips this lever,
and then in its hook is engaged the ring of the other implement whose
ring engages the handle of the bellows, and in this case the rope is
dispensed with.

Resting on beams fixed in the two walls is a longitudinal beam, at a
distance of four and a half feet from the back posts; it is two palms
wide, one and a half palms thick. There are mortised into this
longitudinal beam the lower ends of upper posts three palms wide and two
thick, which are six feet two palms high, exclusive of their tenons. The
upper ends of these posts are mortised into an upper longitudinal beam,
which lies close under the rafters of the building; this upper
longitudinal beam is two palms wide and one thick. The upper posts have
a slot cut out upward from a point two feet from the bottom, and the
slot is two feet high and six digits wide. Through these upper posts a
round hole is bored from one side to the other at a point three feet one
palm from the bottom, and a small iron axle penetrates through the hole
and is fastened there. Around this small iron axle turns the second
lever when it is depressed and raised. This lever is eight feet long,
and its other end is three digits wider than the rest of the lever; at
this widest point is a hole two digits wide and three high, in which is
fixed an iron ring, to which is tied the rope I have mentioned; it is
five palms long, its upper loop is two palms and as many digits wide,
and the lower one is one palm one digit wide. This half of the second
lever, the end of which I have just mentioned, is three palms high and
one wide; it projects three feet beyond the slot of the post on which it
turns; the other end, which faces the back wall of the furnaces, is one
foot and a palm high and a foot wide.

On this part of the lever stands and is fixed a box three and a half
feet long, one foot and one palm wide, and half a foot deep; but these
measurements vary; sometimes the bottom of this box is narrower,
sometimes equal in width to the top. In either case, it is filled with
stones and earth to make it heavy, but the smelters have to be on their
guard and make provision against the stones falling out, owing to the
constant motion; this is prevented by means of an iron band which is
placed over the top, both ends being wedge-shaped and driven into the
lever so that the stones can be held in. Some people, in place of the
box, drive four or more pegs into the lever and put mud between them,
the required amount being added to the weight or taken away from it.

There remains to be considered the method of using this machine. The
lower lever, being depressed by the cams, compresses the bellows, and
the compression drives the air through the nozzle. Then the weight of
the box on the other end of the upper lever raises the upper
bellows-board, and the air is drawn in, entering through the air-hole.

[Illustration 372 (Bellows for blast furnaces): A--Axle. B--Water-wheel.
C--Drum composed of rundles. D--Other axle. E--Toothed wheel. F--Its
spokes. G--Its segments. H--Its teeth. I--Cams of the axle.]

The machine whose cams depress the lower lever is made as follows. First
there is an axle, on whose end outside the building is a water-wheel; at
the other end, which is inside the building, is a drum made of rundles.
This drum is composed of two double hubs, a foot apart, which are five
digits thick, the radius all round being a foot and two digits; but they
are double, because each hub is composed of two discs, equally thick,
fastened together with wooden pegs glued in. These hubs are sometimes
covered above and around by iron plates. The rundles are thirty in
number, a foot and two palms and the same number of digits long, with
each end fastened into a hub; they are rounded, three digits in
diameter, and the same number of digits apart. In this practical manner
is made the drum composed of rundles.

There is a toothed wheel, two palms and a digit thick, on the end of
another axle; this wheel is composed of a double disc[8]. The inner disc
is composed of four segments a palm thick, everywhere two palms and a
digit wide. The outer disc, like the inner, is made of four segments,
and is a palm and a digit thick; it is not equally wide, but where the
head of the spokes are inserted it is a foot and a palm and digit wide,
while on each side of the spokes it becomes a little narrower, until the
narrowest part is only two palms and the same number of digits wide. The
outer segments are joined to the inner ones in such a manner that, on
the one hand, an outer segment ends in the middle of an inner one, and,
on the other hand, the ends of the inner segments are joined in the
middle of the outer ones; there is no doubt that by this kind of joining
the wheel is made stronger. The outer segments are fastened to the inner
by means of a large number of wooden pegs. Each segment, measured over
its round back, is four feet and three palms long. There are four
spokes, each two palms wide and a palm and a digit thick; their length,
excluding the tenons, being two feet and three digits. One end of the
spoke is mortised into the axle, where it is firmly fastened with pegs;
the wide part of the other end, in the shape of a triangle, is mortised
into the outer segment opposite it, keeping the shape of the same as far
as the segment ascends. They also are joined together with wooden pegs
glued in, and these pegs are driven into the spokes under the inner
disc. The parts of the spokes in the shape of the triangle are on the
inside; the outer part is simple. This triangle has two sides equal, the
erect ones as is evident, which are a palm long; the lower side is not
of the same length, but is five digits long, and a mortise of the same
shape is cut out of the segments. The wheel has sixty teeth, since it is
necessary that the rundle drum should revolve twice while the toothed
wheel revolves once. The teeth are a foot long, and project one palm
from the inner disc of the wheel, and three digits from the outer disc;
they are a palm wide and two and a half digits thick, and it is
necessary that they should be three digits apart, as were the rundles.

The axle should have a thickness in proportion to the spokes and the
segments. As it has two cams to depress each of the levers, it is
necessary that it should have twenty-four cams, which project beyond it
a foot and a palm and a digit. The cams are of almost semicircular
shape, of which the widest part is three palms and a digit wide, and
they are a palm thick; they are distributed according to the four sides
of the axle, on the upper, the lower and the two lateral sides. The axle
has twelve holes, of which the first penetrates through from the upper
side to the lower, the second from one lateral side to the other; the
first hole is four feet two palms distant from the second; each
alternate one of these holes is made in the same direction, and they are
arranged at equal intervals. Each single cam must be opposite another;
the first is inserted into the upper part of the first hole, the second
into the lower part of the same hole, and so fixed by pegs that they do
not fall out; the third cam is inserted into that part of the second
hole which is on the right side, and the fourth into that part on the
left. In like manner all the cams are inserted into the consecutive
holes, for which reason it happens that the cams depress the levers of
the bellows in rotation. Finally we must not omit to state that this is
only one of many such axles having cams and a water-wheel.

I have arrived thus far with many words, and yet it is not unreasonable
that I have in this place pursued the subject minutely, since the
smelting of all the metals, to which I am about to proceed, could not be
undertaken without it.

The ores of gold, silver, copper, and lead, are smelted in a furnace by
four different methods. The first method is for the rich ores of gold or
silver, the second for the mediocre ores, the third for the poor ores,
and the fourth method is for those ores which contain copper or lead,
whether they contain precious metals or are wanting in them. The
smelting of the first ores is performed in the furnace of which the
tap-hole is intermittently closed; the other three ores are melted in
furnaces of which the tap-holes are always open.

[Illustration 373 (Stamp-mill): A--Charcoal. B--Mortar-box. C--Stamps.]

First, I will speak of the manner in which the furnaces are prepared for
the smelting of the ores, and of the first method of smelting. The
powder from which the hearth and forehearth should be made is composed
of charcoal and earth (clay?). The charcoal is crushed by the stamps in
a mortar-box, the front of which is closed by a board at the top, while
the charcoal, crushed to powder, is removed through the open part
below; the stamps are not shod with iron, but are made entirely of wood,
although at the lower part they are bound round at the wide part by an
iron band.

[Illustration 374 (Clay Washing): A--Tub. B--Sieve. C--Rods.
D--Bench-frame.]

The powder into which the charcoal is crushed is thrown on to a sieve
whose bottom consists of interwoven withes of wood. The sieve is drawn
backward and forward over two wooden or iron rods placed in a triangular
position on a tub, or over a bench-frame set on the floor of the
building; the powder which falls into the tub or on to the floor is of
suitable size, but the pieces of small charcoal which remain in the
sieve are emptied out and thrown back under the stamps.

[Illustration 375 (Clay Washing): A--Screen. B--Poles. C--Shovel.
D--Two-wheeled cart. E--Hand-sieve. F--Narrow boards. G--Box. H--Covered
pit.]

When the earth is dug up it is first exposed to the sun that it may dry.
Later on it is thrown with a shovel on to a screen--set up obliquely and
supported by poles,--made of thick, loosely woven hazel withes, and in
this way the fine earth and its small lumps pass through the holes of
the screen, but the clods and stones do not pass through, but run down
to the ground. The earth which passes through the screen is conveyed in
a two-wheeled cart to the works and there sifted. This sieve, which is
not dissimilar to the one described above, is drawn backward and
forward upon narrow boards of equal length placed over a long box; the
powder which falls through the sieve into the box is suitable for the
mixture; the lumps that remain in the sieve are thrown away by some
people, but by others they are placed under the stamps. This powdered
earth is mixed with powdered charcoal, moistened, and thrown into a pit,
and in order that it may remain good for a long time, the pit is covered
up with boards so that the mixture may not become contaminated.

[Illustration 377 (Implements for Furnace Work): A--Furnace. B--Ladder.
C--Board fixed to it. D--Hoe. E--Five-toothed rake. F--Wooden spatula.
G--Broom. H--Rammer. I--Rammer, same diameter. K--Two wooden spatulas.
L--Curved blade. M--Bronze rammer. N--Another bronze rammer. O--Wide
spatula. P--Rod. Q--Wicker basket. R--Two buckets of leather in which
water is carried for putting out a conflagration, should the _officina_
catch fire. S--Brass pump with which the water is squirted out. T--Two
hooks. V--Rake. X--Workman beating the clay with an iron implement.]

They take two parts of pulverised charcoal and one part of powdered
earth, and mix them well together with a rake; the mixture is moistened
by pouring water over it so that it may easily be made into shapes
resembling snowballs; if the powder be light it is moistened with more
water, if heavy with less. The interior of the new furnace is lined with
lute, so that the cracks in the walls, if there are any, may be filled
up, but especially in order to preserve the rock from injury by fire. In
old furnaces in which ore has been melted, as soon as the rocks have
cooled the assistant chips away, with a spatula, the accretions which
adhere to the walls, and then breaks them up with an iron hoe or a rake
with five teeth. The cracks of the furnace are first filled in with
fragments of rock or brick, which he does by passing his hand into the
furnace through its mouth, or else, having placed a ladder against it,
he mounts by the rungs to the upper open part of the furnace. To the
upper part of the ladder a board is fastened that he may lean and
recline against it. Then standing on the same ladder, with a wooden
spatula, he smears the furnace walls over with lute; this spatula is
four feet long, a digit thick, and for a foot upward from the bottom it
is a palm wide, or even wider, generally two and a half digits. He
spreads the lute equally over the inner walls of the furnace. The mouth
of the copper pipe[9] should not protrude from the lute, lest sows[10]
form round about it and thus impede the melting, for the furnace bellows
could not force a blast through them. Then the same assistant throws a
little powdered charcoal into the pit of the forehearth and sprinkles it
with pulverised earth. Afterward, with a bucket he pours water into it
and sweeps this all over the forehearth pit, and with the broom drives
the turbid water into the furnace hearth and likewise sweeps it out.
Next he throws the mixed and moistened powder into the furnace, and then
a second time mounting the steps of the ladder, he introduces the rammer
into the furnace and pounds the powder so that the hearth is made solid.
The rammer is rounded and three palms long; at the bottom it is five
digits in diameter, at the top three and a half, therefore it is made in
the form of a truncated cone; the handle of the rammer is round and five
feet long and two and a half digits thick; the upper part of the
rammer, where the handle is inserted, is bound with an iron band two
digits wide. There are some who, instead, use two rounded rammers three
and a half digits in diameter, the same at the bottom as at the top.
Some people prefer two wooden spatulas, or a rammer spatula.

In a similar manner, mixed and moistened powder is thrown and pounded
with a rammer in the forehearth pit, which is outside the furnace. When
this is nearly completed, powder is again put in, and pushed with the
rammer up toward the protruding copper pipe, so that from a point a
digit under the mouth of the copper pipe the hearth slopes down into the
crucible of the forehearth,[11] and the metal can run down. The same is
repeated until the forehearth pit is full, then afterward this is
hollowed out with a curved blade; this blade is of iron, two palms and
as many digits long, three digits wide, blunt at the top and sharp at
the bottom. The crucible of the forehearth must be round, a foot in
diameter and two palms deep if it has to contain a _centumpondium_ of
lead, or if only seventy _librae_, then three palms in diameter and two
palms deep like the other. When the forehearth has been hollowed out it
is pounded with a round bronze rammer. This is five digits high and the
same in diameter, having a curved round handle one and a half digits
thick; or else another bronze rammer is used, which is fashioned in the
shape of a cone, truncated at the top, on which is imposed another cut
away at the bottom, so that the middle part of the rammer may be grasped
by the hand; this is six digits high, and five digits in diameter at the
lower end and four at the top. Some use in its place a wooden spatula
two and a half palms wide at the lower end and one palm thick.

The assistant, having prepared the forehearth, returns to the furnace
and besmears both sides as well as the top of the mouth with simple
lute. In the lower part of the mouth he places lute that has been dipped
in charcoal dust, to guard against the risk of the lute attracting to
itself the powder of the hearth and vitiating it. Next he lays in the
mouth of the furnace a straight round rod three quarters of a foot long
and three digits in diameter. Afterward he places a piece of charcoal on
the lute, of the same length and width as the mouth, so that it is
entirely closed up; if there be not at hand one piece of charcoal so
large, he takes two instead. When the mouth is thus closed up, he throws
into the furnace a wicker basket full of charcoal, and in order that the
piece of charcoal with which the mouth of the furnace is closed should
not then fall out, the master holds it in with his hand. The pieces of
charcoal which are thrown into the furnace should be of medium size, for
if they are large they impede the blast of the bellows and prevent it
from blowing through the tap-hole of the furnace into the forehearth to
heat it. Then the master covers over the charcoal, placed at the mouth
of the furnace, with lute and extracts the wooden rod, and thus the
furnace is prepared. Afterward the assistant throws four or five larger
baskets full of charcoal into the furnace, filling it right up; he also
throws a little charcoal into the forehearth, and places glowing coals
upon it in order that it may be kindled, but in order that the flames of
this fire should not enter through the tap-hole of the furnace and fire
the charcoal inside, he covers the tap-hole with lute or closes it with
fragments of pottery. Some do not warm the forehearth the same evening,
but place large charcoals round the edge of it, one leaning on the
other; those who follow the first method sweep out the forehearth in the
morning, and clean out the little pieces of charcoal and cinders, while
those who follow the latter method take, early in the morning, burning
firebrands, which have been prepared by the watchman of the works, and
place them on the charcoal.

At the fourth hour the master begins his work. He first inserts a small
piece of glowing coal into the furnace, through the bronze nozzle-pipe
of the bellows, and blows up the fire with the bellows; thus within the
space of half an hour the forehearth, as well as the hearth, becomes
warmed, and of course more quickly if on the preceding day ores have
been smelted in the same furnace, but if not then it warms more slowly.
If the hearth and forehearth are not warmed before the ore to be smelted
is thrown in, the furnace is injured and the metals lost; or if the
powder from which both are made is damp in summer or frozen in winter,
they will be cracked, and, giving out a sound like thunder, they will
blow out the metals and other substances with great peril to the
workmen. After the furnace has been warmed, the master throws in slags,
and these, when melted, flow out through the tap-hole into the
forehearth. Then he closes up the tap-hole at once with mixed lute and
charcoal dust; this plug he fastens with his hand to a round wooden
rammer that is five digits thick, two palms high, with a handle three
feet long. The smelter extracts the slags from the forehearth with a
hooked bar; if the ore to be smelted is rich in gold or silver he puts
into the forehearth a _centumpondium_ of lead, or half as much if the
ore is poor, because the former requires much lead, the latter little;
he immediately throws burning firebrands on to the lead so that it
melts. Afterward he performs everything according to the usual manner
and order, whereby he first throws into the furnace as many cakes melted
from pyrites[12], as he requires to smelt the ore; then he puts in two
wicker baskets full of ore with litharge and hearth-lead[13], and stones
which fuse easily by fire of the second order, all mixed together; then
one wicker basket full of charcoal, and lastly the slags. The furnace
now being filled with all the things I have mentioned, the ore is slowly
smelted; he does not put too much of it against the back wall of the
furnace, lest sows should form around the nozzles of the bellows and the
blast be impeded and the fire burn less fiercely.

This, indeed, is the custom of many most excellent smelters, who know
how to govern the four elements[14]. They combine in right proportion
the ores, which are part earth, placing no more than is suitable in the
furnaces; they pour in the needful quantity of water; they moderate with
skill the air from the bellows; they throw the ore into that part of the
fire which burns fiercely. The master sprinkles water into each part of
the furnace to dampen the charcoal slightly, so that the minute parts of
ore may adhere to it, which otherwise the blast of the bellows and the
force of the fire would agitate and blow away with the fumes. But as the
nature of the ores to be smelted varies, the smelters have to arrange
the hearth now high, now low, and to place the pipe in which the nozzles
of the bellows are inserted sometimes on a great and sometimes at a
slight angle, so that the blast of the bellows may blow into the
furnace in either a mild or a vigorous manner. For those ores which heat
and fuse easily, a low hearth is necessary for the work of the smelters,
and the pipe must be placed at a gentle angle to produce a mild blast
from the bellows. On the contrary, those ores that heat and fuse slowly
must have a high hearth, and the pipe must be placed at a steep incline
in order to blow a strong blast of the bellows, and it is necessary, for
this kind of ore, to have a very hot furnace in which slags, or cakes
melted from pyrites, or stones which melt easily in the fire[15], are
first melted, so that the ore should not settle in the hearth of the
furnace and obstruct and choke up the tap-hole, as the minute metallic
particles that have been washed from the ores are wont to do. Large
bellows have wide nozzles, for if they were narrow the copious and
strong blast would be too much compressed and too acutely blown into the
furnace, and then the melted material would be chilled, and would form
sows around the nozzle, and thus obstruct the opening into the furnace,
which would cause great damage to the proprietors' property. If the ores
agglomerate and do not fuse, the smelter, mounting on the ladder placed
against the side of the furnace, divides the charge with a pointed or
hooked bar, which he also pushes down into the pipe in which the nozzle
of the bellows is placed, and by a downward movement dislodges the ore
and the sows from around it.

After a quarter of an hour, when the lead which the assistant has placed
in the forehearth is melted, the master opens the tap-hole of the
furnace with a tapping-bar. This bar is made of iron, is three and a
half feet long, the forward end pointed and a little curved, and the
back end hollow so that into it may be inserted a wooden handle, which
is three feet long and thick enough to be well grasped by the hand. The
slag first flows from the furnace into the forehearth, and in it are
stones mixed with metal or with the metal adhering to them partly
altered, the slag also containing earth and solidified juices. After
this the material from the melted pyrites flows out, and then the molten
lead contained in the forehearth absorbs the gold and silver. When that
which has run out has stood for some time in the forehearth, in order to
be able to separate one from the other, the master first either skims
off the slags with the hooked bar or else lifts them off with an iron
fork; the slags, as they are very light, float on the top. He next draws
off the cakes of melted pyrites, which as they are of medium weight hold
the middle place; he leaves in the forehearth the alloy of gold or
silver with the lead, for these being the heaviest, sink to the bottom.
As, however, there is a difference in slags, the uppermost containing
little metal, the middle more, and the lowest much, he puts these away
separately, each in its own place, in order that to each heap, when it
is re-smelted, he may add the proper fluxes, and can put in as much lead
as is demanded for the metal in the slag; when the slag is re-melted, if
it emits much odour, there is some metal in it; if it emits no odour,
then it contains none. He puts the cakes of melted pyrites away
separately, as they were nearest in the forehearth to the metal, and
contain a little more of it than the slags; from all these cakes a
conical mound is built up, by always placing the widest of them at the
bottom. The hooked bar has a hook on the end, hence its name; otherwise
it is similar to other bars.

[Illustration 383 (Blast Furnaces): A, B, C--Three furnaces. At the
first stands the smelter, who with a ladle pours the alloy out of the
forehearth into the moulds. D--Forehearth. E--Ladle. F--Moulds. G--Round
wooden rammer. H--Tapping-bar. At the second furnace stands the smelter,
who opens the tap-hole with his tapping-bar. The assistant, standing on
steps placed against the third furnace which has been broken open, chips
off the accretions. I--Steps. K--Spatula. L--The other hooked bar.
M--Mine captain carrying a cake, in which he has stuck the pick, to the
scales to be weighed. N--Another mine captain opens a chest in which his
things are kept.]

Afterward the master closes up the tap-hole and fills the furnace with
the same materials I described above, and again, the ores having been
melted, he opens the tap-hole, and with a hooked bar extracts the slags
and the cakes melted from pyrites, which have run down into the
forehearth. He repeats the same operation until a certain and definite
part of the ore has been smelted, and the day's work is at an end; if
the ore was rich the work is finished in eight hours; if poor, it takes
a longer time. But if the ore was so rich as to be smelted in less than
eight hours, another operation is in the meanwhile combined with the
first, and both are performed in the space of ten hours. When all the
ore has been smelted, he throws into the furnace a basket full of
litharge or hearth-lead, so that the metal which has remained in the
accretions may run out with these when melted. When he has finally drawn
out of the forehearth the slags and the cakes melted from pyrites, he
takes out, with a ladle, the lead alloyed with gold or silver and pours
it into little iron or copper pans, three palms wide and as many digits
deep, but first lined on the inside with lute and dried by warming, lest
the glowing molten substances should break through. The iron ladle is
two palms wide, and in other respects it is similar to the others, all
of which have a sufficiently long iron shaft, so that the fire should
not burn the wooden part of the handle. When the alloy has been poured
out of the forehearth, the smelter foreman and the mine captain weigh
the cakes.

Then the master breaks out the whole of the mouth of the furnace with a
crowbar, and with that other hooked bar, the rabble and the five-toothed
rake, he extracts the accretions and the charcoal. This crowbar is not
unlike the other hooked one, but larger and wider; the handle of the
rabble is six feet long and is half of iron and half of wood. The
furnace having cooled, the master chips off the accretions clinging to
the walls with a rectangular spatula six digits long, a palm broad, and
sharp on the front edge; it has a round handle four feet long, half of
it being of iron and half of wood. This is the first method of smelting
ores.

Because they generally consist of unequal constituents, some of which
melt rapidly and others slowly, the ores rich in gold and silver cannot
be smelted as rapidly or as easily by the other methods as they can by
the first method, for three important reasons. The first reason is that,
as often as the closed tap-hole of the furnace is opened with a
tapping-bar, so often can the smelter observe whether the ore is
melting too quickly or too slowly, or whether it is flaming in scattered
bits, and not uniting in one mass; in the first case the ore is smelting
too slowly and not without great expense; in the second case the metal
mixes with the slag which flows out of the furnace into the forehearth,
wherefore there is the expense of melting it again; in the third case,
the metal is consumed by the violence of the fire. Each of these evils
has its remedy; if the ore melts slowly or does not come together, it is
necessary to add some amount of fluxes which melt the ore; or if they
melt too readily, to decrease the amount.

The second reason is that each time that the furnace is opened with a
tapping-bar, it flows out into the forehearth, and the smelter is able
to test the alloy of gold and lead or of silver with lead, which is
called _stannum_.[16] When the tap-hole is opened the second or third
time, this test shows us whether the alloy of gold or silver has become
richer, or whether the lead is too debilitated and wanting in strength
to absorb any more gold or silver. If it has become richer, some portion
of lead added to it should renew its strength; if it has not become
richer, it is poured out of the forehearth that it may be replaced with
fresh lead.

The third reason is that if the tap-hole of the furnace is always open
when the ore and other things are being smelted, the fluxes, which are
easily melted, run out of the furnace before the rich gold and silver
ores, for these are sometimes of a kind that oppose and resist melting
by the fire for a longer period. It follows in this case, that some part
of the ore is either consumed or is mixed with the accretions, and as a
result little lumps of ore not yet melted are now and then found in the
accretions. Therefore when these ores are being smelted, the tap-hole of
the furnace should be closed for a time, as it is necessary to heat and
mix the ore and the fluxes at the same time; since the fluxes fuse more
rapidly than the ore, when the molten fluxes are held in the furnace,
they thus melt the ore which does not readily fuse or mix with the lead.
The lead absorbs the gold or silver, just as tin or lead when melted in
the forehearth absorbs the other unmelted metal which has been thrown
into it. But if the molten matter is poured upon that which is not
molten, it runs off on all sides and consequently does not melt it. It
follows from all this that ores rich in gold or silver, when put into a
furnace with its tap-hole always open, cannot for that reason be smelted
so successfully as in one where the tap-hole is closed for a time, so
that during this time the ore may be melted by the molten fluxes.
Afterward, when the tap-hole has been opened, they flow into the
forehearth and mix there with the molten lead. This method of smelting
the ores is used by us and by the Bohemians.

[Illustration 385 (Blast Furnaces): A, B--Two furnaces. C--Forehearths.
D--Dipping-pot. The smelter standing by the first furnace draws off the
slags with a hooked bar. E--Hooked bar. F--Slags. G--The assistant
drawing a bucket of water which he pours over the glowing slags to
quench them. H--Basket made of twigs of wood intertwined. I--Rabble.
K--Ore to be smelted. L--The master stands at the other furnace and
prepares the forehearth by ramming it with two rammers. M--Crowbar.]

The three remaining methods of smelting ores are similar to each other
in that the tap-holes of the furnaces always remain open, so that the
molten metals may continually run out. They differ greatly from each
other, however, for the tap-hole of the first of this kind is deeper
in the furnace and narrower than that of the third, and besides it is
invisible and concealed. It easily discharges into the forehearth, which
is one and a half feet higher than the floor of the building, in order
that below it to the left a dipping-pot can be made. When the forehearth
is nearly full of the slags, which well up from the invisible tap-hole
of the furnace, they are skimmed off from the top with a hooked bar;
then the alloy of gold or silver with lead and the melted pyrites, being
uncovered, flow into the dipping-pot, and the latter are made into
cakes; these cakes are broken and thrown back into the furnace so that
all their metal may be smelted out. The alloy is poured into little iron
moulds.

The smelter, besides lead and cognate things, uses fluxes which combine
with the ore, of which I gave a sufficient account in Book VII. The
metals which are melted from ores that fuse readily in the fire, are
profitable because they are smelted in a short time, while those which
are difficult to fuse are not as profitable, because they take a long
time. When fluxes remain in the furnace and do not melt, they are not
suitable; for this reason, accretions and slags are the most convenient
for smelting, because they melt quickly. It is necessary to have an
industrious and experienced smelter, who in the first place takes care
not to put into the furnace more ores mixed with fluxes than it can
accommodate.

The powder out of which this furnace hearth and the adjoining forehearth
and the dipping-pot are usually made, consists mostly of equal
proportions of charcoal dust and of earth, or of equal parts of the same
and of ashes. When the hearth of the furnace is prepared, a rod that
will reach to the forehearth is put into it, higher up if the ore to be
smelted readily fuses, and lower down if it fuses with difficulty. When
the dipping-pot and forehearth are finished, the rod is drawn out of the
furnace so that the tap-hole is open, and through it the molten material
flows continuously into the forehearth, which should be very near the
furnace in order that it may keep very hot and the alloy thus be made
purer. If the ore to be smelted does not melt easily, the hearth of the
furnace must not be made too sloping, lest the molten fluxes should run
down into the forehearth before the ore is smelted, and the metal thus
remain in the accretions on the sides of the furnace. The smelter must
not ram the hearth so much that it becomes too hard, nor make the
mistake of ramming the lower part of the mouth to make it hard, for it
could not breathe[17], nor could the molten matter flow freely out of
the furnace. The ore which does not readily melt is thrown as much as
possible to the back of the furnace, and toward that part where the fire
burns very fiercely, so that it may be smelted longer. In this way the
smelter may direct it whither he wills. Only when it glows at the part
near the bellows' nozzle does it signify that all the ore is smelted
which has been thrown to the side of the furnace in which the nozzles
are placed. If the ore is easily melted, one or two wicker baskets full
are thrown into the front part of the furnace so that the fire, being
driven back by it, may also smelt the ore and the sows that form round
about the nozzles of the bellows. This process of smelting is very
ancient among the Tyrolese[18], but not so old among the Bohemians.

[Illustration 387 (Blast Furnaces): A, B--Two furnaces. C--Forehearth.
D--Dipping-pots. The master stands at the one furnace and draws away the
slags with an iron fork. E--Iron fork. F--Wooden hoe with which the
cakes of melted pyrites are drawn out. G--The forehearth crucible:
one-half inside is to be seen open in the other furnace. H--The half
outside the furnace. I--The assistant prepares the forehearth, which is
separated from the furnace that it may be seen. K--Bar. L--Wooden
rammer. M--Ladder. N--Ladle.]

The second method of smelting ores stands in a measure midway between
that one performed in a furnace of which the tap-hole is closed
intermittently, and the first of the methods performed in a furnace
where the tap-hole is always open. In this manner are smelted the ores
of gold and silver that are neither very rich nor very poor, but
mediocre, which fuse easily and are readily absorbed by the lead. It was
found that in this way a large quantity of ore could be smelted at one
operation without much labour or great expense, and could thus be
alloyed with lead. This furnace has two crucibles, one of which is half
inside the furnace and half outside, so that the lead being put into
this crucible, the part of the lead which is in the furnace absorbs the
metals of the ores which easily fuse; the other crucible is lower, and
the alloy and the molten pyrites run into it. Those who make use of this
method of smelting, tap the alloy of gold or silver with lead from the
upper crucible once or twice if need be, and throw in other lead or
litharge, and each absorbs that flux which is nearest. This method of
smelting is in use in Styria[19].

[Illustration 389 (Furnaces): A, B--Two furnaces. C--Tap-holes of
furnaces. D--Forehearths. E--Their tap-holes. F--Dipping-pots. G--At the
one furnace stands the smelter carrying a wicker basket full of
charcoal. At the other furnace stands a smelter who with the third
hooked bar breaks away the material which has frozen the tap-hole of the
furnace. H--Hooked bar. I--Heap of charcoal. K--Barrow on which is a box
made of wicker work in which the coals are measured. L--Iron spade.]

The furnace in the third method of smelting ores has the tap-hole
likewise open, but the furnace is higher and wider than the others, and
its bellows are larger; for these reasons a larger charge of the ore can
be thrown into it. When the mines yield a great abundance of ore for the
smelter, they smelt in the same furnace continuously for three days and
three nights, providing there be no defect either in the hearth or in
the forehearth. In this kind of a furnace almost every kind of accretion
will be found. The forehearth of the furnace is not unlike the
forehearth of the first furnace of all, except that it has a tap-hole.
However, because large charges of ore are smelted uninterruptedly, and
the melted material runs out and the slags are skimmed off, there is
need for a second forehearth crucible, into which the molten material
runs through an opened tap-hole when the first is full. When a smelter
has spent twelve hours' labour on this work, another always takes his
place. The ores of copper and lead and the poorest ores of gold and
silver are smelted by this method, because they cannot be smelted by the
other three methods on account of the greater expense occasioned. Yet by
this method a _centumpondium_ of ore containing only one or two
_drachmae_ of gold, or only a half to one _uncia_, of silver,[20] can be
smelted; because there is a large amount of ore in each charge, smelting
is continuous, and without expensive fluxes such as lead, litharge, and
hearth-lead. In this method of smelting we must use only cupriferous
pyrites which easily melt in the fire, in truth the cakes melted out
from this, if they no longer absorb much gold or silver, are
replenished again from crude pyrites alone. If from this poor ore, with
melted pyrites alone, material for cakes cannot be made, there are added
other fluxes which have not previously been melted. These fluxes are,
namely, lead ore, stones easily fused by fire of the second order and
sand made from them, limestone, _tophus_, white schist, and iron
stone[21].

Although this method of smelting ores is rough and might not seem to be
of great use, yet it is clever and useful; for a great weight of ores,
in which the gold, silver, or copper are in small quantities, may be
reduced into a few cakes containing all the metal. If on being first
melted they are too crude to be suitable for the second melting, in
which the lead absorbs the precious metals that are in the cakes, or in
which the copper is melted out of them, yet they can be made suitable if
they are repeatedly roasted, sometimes as often as seven or eight times,
as I have explained in the last book. Smelters of this kind are so
clever and expert, that in smelting they take out all the gold and
silver which the assayer in assaying the ores has stated to be contained
in them, because if during the first operation, when he makes the cakes,
there is a _drachma_ of gold or half an _uncia_ of silver lost from the
ores, the smelter obtains it from the slags by the second smelting. This
method of smelting ores is old and very common to most of those who use
other methods.

[Illustration 393 (Lead smelting Furnaces): A--Furnace of the Carni.
B--Low wall. C--Wood. D--Ore dripping lead. E--Large crucible.
F--Moulds. G--Ladle. H--Slabs of lead. I--Rectangular hole at the back
of the furnace. K--Saxon furnace. L--Opening in the back of the furnace.
M--Wood. N--Upper crucible. O--Dipping-pot. P--Westphalian method of
melting. Q--Heaps of charcoal. R--Straw. S--Wide slabs. T--Crucibles.
V--Polish hearth.]

Although lead ores are usually smelted in the third furnace--whose
tap-hole is always open,--yet not a few people melt them in special
furnaces by a method which I will briefly explain. The _Carni_[22] first
burn such lead ores, and afterward break and crush them with large round
mallets. Between the two low walls of a hearth, which is inside a
furnace made of and vaulted with a rock that resists injury by the fire
and does not burn into chalk, they place green wood with a layer of dry
wood on the top of it; then they throw the ore on to this, and when the
wood is kindled the lead drips down and runs on to the underlying
sloping hearth[23]. This hearth is made of pulverised charcoal and
earth, as is also a large crucible, one-half of which lies under the
furnace and the other half outside it, into which runs the lead. The
smelter, having first skimmed off the slags and other things with a hoe,
pours the lead with a ladle into moulds, taking out the cakes after they
have cooled. At the back of the furnace is a rectangular hole, so that
the fire may be allowed more draught, and so that the smelter can crawl
through it into the furnace if necessity demands.

The Saxons who inhabit Gittelde, when smelting lead ore in a furnace not
unlike a baking oven, put the wood in through a hole at the back of the
furnace, and when it begins to burn vigorously the lead trickles out of
the ore into a forehearth. When this is full, the smelting being
accomplished, the tap-hole is opened with a bar, and in this way the
lead, together with the slags, runs into the dipping-pots below.
Afterward the cakes of lead, when they are cold, are taken from the
moulds.

In Westphalia they heap up ten wagon-loads of charcoal on some hillside
which adjoins a level place, and the top of the heap being made flat,
straw is thrown upon it to the thickness of three or four digits. On the
top of this is laid as much pure lead ore as the heap can bear; then
the charcoal is kindled, and when the wind blows, it fans the fire so
that the ore is smelted. In this wise the lead, trickling down from the
heap, flows on to the level and forms broad thin slabs. A few hundred
pounds of lead ore are kept at hand, which, if things go well, are
scattered over the heap. These broad slabs are impure and are laid upon
dry wood which in turn is placed on green wood laid over a large
crucible, and the former having been kindled, the lead is re-melted.

The Poles use a hearth of bricks four feet high, sloping on both sides
and plastered with lute. On the upper level part of the hearth large
pieces of wood are piled, and on these is placed small wood with lute
put in between; over the top are laid wood shavings, and upon these
again pure lead ore covered with large pieces of wood. When these are
kindled, the ore melts and runs down on to the lower layer of wood;
and when this is consumed by the fire, the metal is collected. If
necessity demand, it is melted over and over again in the same manner,
but it is finally melted by means of wood laid over the large crucible,
the slabs of lead being placed upon it.

The concentrates from washing are smelted together with slags (fluxes?)
in a third furnace, of which the tap-hole is always open.

[Illustration 395 (Blast Furnaces): A--Furnaces. B--Vaulted roof.
C--Columns. D--Dust-chamber. E--Opening. F--Chimney. G--Window. H--Door.
I--Chute.]

It is worth while to build vaulted dust-chambers over the furnaces,
especially over those in which the precious ores are to be smelted, in
order that the thicker part of the fumes, in which metals are not
wanting, may be caught and saved. In this way two or more furnaces are
combined under the same vaulted ceiling, which is supported by the wall,
against which the furnaces are built, and by four columns. Under this
the smelters of the ore perform their work. There are two openings
through which the fumes rise from the furnaces into the wide vaulted
chamber, and the wider this is the more fumes it collects; in the middle
of this chamber over the arch is an opening three palms high and two
wide. This catches the fumes of both furnaces, which have risen up from
both sides of the vaulted chamber to its arch, and have fallen again
because they could not force their way out; and they thus pass out
through the opening mentioned, into the chimney which the Greeks call
[Greek: kapnodoche], the name being taken from the object. The chimney
has thin iron plates fastened into the walls, to which the thinner
metallic substances adhere when ascending with the fumes. The thicker
metallic substances, or _cadmia_,[25] adhere to the vaulted chamber, and
often harden into stalactites. On one side of the chamber is a window in
which are set panes of glass, so that the light may be transmitted, but
the fumes kept in; on the other side is a door, which is kept entirely
closed while the ores are being smelted in the furnaces, so that none of
the fumes may escape. It is opened in order that the workman, passing
through it, may be enabled to enter the chamber and remove the soot and
_pompholyx_[26] and chip off the _cadmia_; this sweeping is done twice
a year. The soot mixed with _pompholyx_ and the _cadmia_, being chipped
off, is thrown down through a long chute made of four boards joined in
the shape of a rectangle, that they should not fly away. They fall on to
the floor, and are sprinkled with salt water, and are again smelted with
ore and litharge, and become an emolument to the proprietors. Such
chambers, which catch the metallic substances that rise with the fumes,
are profitable for all metalliferous ores; but especially for the minute
metallic particles collected by washing crushed ores and rock, because
these usually fly out with the fire of the furnaces.

I have explained the four general methods of smelting ores; now I will
state how the ores of each metal are smelted, or how the metal is
obtained from the ore. I will begin with gold. Its sand, the
concentrates from washing, or the gold dust collected in any other
manner, should very often not be smelted, but should be mixed with
quicksilver and washed with tepid water, so that all the impurities may
be eliminated. This method I explained in Book VII. Or they are placed
in the _aqua_ which separates gold from silver, for this also separates
its impurities. In this method we see the gold sink in the glass
ampulla, and after all the _aqua_ has been drained from the particles,
it frequently remains as a gold-coloured residue at the bottom; this
powder, when it has been moistened with oil made from argol[27], is then
dried and placed in a crucible, where it is melted with borax or with
saltpetre and salt; or the same very fine dust is thrown into molten
silver, which absorbs it, and from this it is again parted by _aqua
valens_[28].

It is necessary to smelt gold ore either outside the blast furnace in a
crucible, or inside the blast furnace; in the former case a small charge
of ore is used, in the latter a large charge of it. _Rudis_ gold, of
whatever colour it is, is crushed with a _libra_ each of sulphur and
salt, a third of a _libra_ of copper, and a quarter of a _libra_ of
argol; they should be melted in a crucible on a slow fire for three
hours, then the alloy is put into molten silver that it may melt more
rapidly. Or a _libra_ of the same crude gold, crushed up, is mixed
together with half a _libra_ of _stibium_ likewise crushed, and put into
a crucible with half an _uncia_ of copper filings, and heated until they
melt, then a sixth part of granulated lead is thrown into the same
crucible. As soon as the mixture emits an odour, iron-filings are added
to it, or if these are not at hand, iron hammer-scales, for both of
these break the strength of the _stibium_. When the fire consumes it,
not alone with it is some strength of the _stibium_ consumed, but some
particles of gold and also of silver, if it be mixed with the gold[29].
When the button has been taken out of the crucible and cooled, it is
melted in a cupel, first until the antimony is exhaled, and thereafter
until the lead is separated from it.

Crushed pyrites which contains gold is smelted in the same way; it and
the _stibium_ should be of equal weight and in truth the gold may be
made from them in a number of different ways[30]. One part of crushed
material is mixed with six parts of copper, one part of sulphur, half a
part of salt, and they are all placed in a pot and over them is poured
wine distilled by heating liquid argol in an ampulla. The pot is covered
and smeared over with lute and is put in a hot place, so that the
mixture moistened with wine may dry for the space of six days, then it
is heated for three hours over a gentle fire that it may combine more
rapidly with the lead. Finally it is put into a cupel and the gold is
separated from the lead[31].

Or else one _libra_ of the concentrates from washing pyrites, or other
stones to which gold adheres, is mixed with half a _libra_ of salt, half
a _libra_ of argol, a third of a _libra_ of glass-galls, a sixth of a
_libra_ of gold or silver slags, and a _sicilicus_ of copper. The
crucible into which these are put, after it has been covered with a lid,
is sealed with lute and placed in a small furnace that is provided with
small holes through which the air is drawn in, and then it is heated
until it turns red and the substances put in have alloyed; this should
take place within four or five hours. The alloy having cooled, it is
again crushed to powder and a pound of litharge is added to it; then it
is heated again in another crucible until it melts. The button is taken
out, purged of slag, and placed in a cupel, where the gold is separated
from the lead.

Or to a _libra_ of the powder prepared from such metalliferous
concentrates, is added a _libra_ each of salt, of saltpetre, of argol,
and of glass-galls, and it is heated until it melts. When cooled and
crushed, it is washed, then to it is added a _libra_ of silver, a third
of copper filings, a sixth of litharge, and it is likewise heated again
until it melts. After the button has been purged of slag, it is put into
the cupel, and the gold and silver are separated from the lead; the gold
is parted from the silver with _aqua valens_. Or else a _libra_ of the
powder prepared from such metalliferous concentrates, a quarter of a
_libra_ of copper filings, and two _librae_ of that second powder[32]
which fuses ores, are heated until they melt. The mixture when cooled is
again reduced to powder, roasted and washed, and in this manner a blue
powder is obtained. Of this, and silver, and that second powder which
fuses ores, a _libra_ each are taken, together with three _librae_ of
lead, and a quarter of a _libra_ of copper, and they are heated together
until they melt; then the button is treated as before. Or else a _libra_
of the powder prepared from such metalliferous concentrates, half a
_libra_ of saltpetre, and a quarter of a _libra_ of salt are heated
until they melt. The alloy when cooled is again crushed to powder, one
_libra_ of which is absorbed by four pounds of molten silver. Or else a
_libra_ of the powder made from that kind of concentrates, together with
a _libra_ of sulphur, a _libra_ and a half of salt, a third of a _libra_
of salt made from argol, and a third of a _libra_ of copper resolved
into powder with sulphur, are heated until they melt. Afterward the lead
is re-melted, and the gold is separated from the other metals. Or else a
_libra_ of the powder of this kind of concentrates, together with two
_librae_ of salt, half a _libra_ of sulphur, and one _libra_ of
litharge, are heated, and from these the gold is melted out. By these
and similar methods concentrates containing gold, if there be a small
quantity of them or if they are very rich, can be smelted outside the
blast furnace.

If there be much of them and they are poor, then they are smelted in the
blast furnace, especially the ore which is not crushed to powder, and
particularly when the gold mines yield an abundance of it[33]. The gold
concentrates mixed with litharge and hearth-lead, to which are added
iron-scales, are smelted in the blast furnace whose tap-hole is
intermittently closed, or else in the first or the second furnaces in
which the tap-hole is always open. In this manner an alloy of gold and
lead is obtained which is put into the cupellation furnace. Two parts of
roasted pyrites or _cadmia_ which contain gold, are put with one part of
unroasted, and are smelted together in the third furnace whose tap-hole
is always open, and are made into cakes. When these cakes have been
repeatedly roasted, they are re-smelted in the furnace whose tap-hole is
temporarily closed, or in one of the two others whose tap-holes are
always open. In this manner the lead absorbs the gold, whether pure or
argentiferous or cupriferous, and the alloy is taken to the cupellation
furnace. Pyrites, or other gold ore which is mixed with much material
that is consumed by fire and flies out of the furnace, is melted with
stone from which iron is melted, if this is at hand. Six parts of such
pyrites, or of gold ore reduced to powder and sifted, four of stone from
which iron is made, likewise crushed, and three of slaked lime, are
mixed together and moistened with water; to these are added two and a
half parts of the cakes which contain some copper, together with one and
a half parts of slag. A basketful of fragments of the cakes is thrown
into the furnace, then the mixture of other things, and then the slag.
Now when the middle part of the forehearth is filled with the molten
material which runs down from the furnace, the slags are first skimmed
off, and then the cakes made of pyrites; afterward the alloy of copper,
gold and silver, which settles at the bottom, is taken out. The cakes
are gently roasted and re-smelted with lead, and made into cakes, which
are carried to other works. The alloy of copper, gold, and silver is not
roasted, but is re-melted again in a crucible with an equal portion of
lead. Cakes are also made much richer in copper and gold than those I
spoke of. In order that the alloy of gold and silver may be made
richer, to eighteen _librae_ of it are added forty-eight _librae_ of
crude ore, three _librae_ of the stone from which iron is made, and
three-quarters of a _libra_ of the cakes made from pyrites, and mixed
with lead, all are heated together in the crucible until they melt. When
the slag and the cakes melted from pyrites have been skimmed off, the
alloy is carried to other furnaces.

There now follows silver, of which the native silver or the lumps of
_rudis_ silver[34] obtained from the mines are not smelted in the blast
furnaces, but in small iron pans, of which I will speak at the proper
place; these lumps are heated and thrown into molten silver-lead alloy
in the cupellation furnace when the silver is being separated from the
lead, and refined. The tiny flakes or tiny lumps of silver adhering to
stones or marble or rocks, or again the same little lumps mixed with
earth, or silver not pure enough, should be smelted in the furnace of
which the tap-hole is only closed for a short time, together with cakes
melted from pyrites, with silver slags, and with stones which easily
fuse in fire of the second order.

In order that particles of silver should not fly away[35] from the lumps
of ore consisting of minute threads of pure silver and twigs of native
silver, they are enclosed in a pot, and are placed in the same furnace
where the rest of the silver ores are being smelted. Some people smelt
lumps of native silver not sufficiently pure, in pots or triangular
crucibles, whose lids are sealed with lute. They do not place these pots
in the blast furnace, but arrange them in the assay furnace into which
the draught of the air blows through small holes. To one part of the
native silver they add three parts of powdered litharge, as many parts
of hearth-lead, half a part of galena[36], and a small quantity of salt
and iron-scales. The alloy which settles at the bottom of the other
substances in the pot is carried to the cupellation furnace, and the
slags are re-melted with the other silver slags. They crush under the
stamps and wash the pots or crucibles to which silver-lead alloy or
slags adhere, and having collected the concentrates they smelt them
together with the slags. This method of smelting _rudis_ silver, if
there is a small quantity of it, is the best, because the smallest
portion of silver does not fly out of the pot or the crucible, and get
lost.

If bismuth ore or antimony ore or lead ore[37] contains silver, it is
smelted with the other ores of silver; likewise galena or pyrites, if
there is a small amount of it. If there be much galena, whether it
contain a large or a small amount of silver, it is smelted separately
from the others; which process I will explain a little further on.

Because lead and copper ores and their metals have much in common with
silver ores, it is fitting that I should say a great deal concerning
them, both now and later on. Also in the same manner, pyrites are
smelted separately if there be much of them. To three parts of roasted
lead or copper ore and one part of crude ore, are added concentrates if
they were made by washing the same ore, together with slags, and all are
put in the third furnace whose tap-hole is always open. Cakes are made
from this charge, which, when they have been quenched with water, are
roasted. Of these roasted cakes generally four parts are again mixed
with one part of crude pyrites and re-melted in the same furnace. Cakes
are again made from this charge, and if there is a large amount of
copper in these cakes, copper is made immediately after they have been
roasted and re-melted; if there is little copper in the cakes they are
also roasted, but they are re-smelted with a little soft slag. In this
method the molten lead in the forehearth absorbs the silver. From the
pyritic material which floats on the top of the forehearth are made
cakes for the third time, and from them when they have been roasted and
re-smelted is made copper. Similarly, three parts of roasted
_cadmia_[38] in which there is silver, are mixed with one part of crude
pyrites, together with slag, and this charge is smelted and cakes are
made from it; these cakes having been roasted are re-smelted in the same
furnace. By this method the lead contained in the forehearth absorbs the
silver, and the silver-lead is taken to the cupellation furnace. Crude
quartz and stones which easily fuse in fire of the third order, together
with other ores in which there is a small amount of silver, ought to be
mixed with crude roasted pyrites or _cadmia_, because the roasted cakes
of pyrites or _cadmia_ cannot be profitably smelted separately. In a
similar manner earths which contain little silver are mixed with the
same; but if pyrites and _cadmia_ are not available to the smelter, he
smelts such silver ores and earths with litharge, hearth-lead, slags,
and stones which easily melt in the fire. The concentrates[39]
originating from the washing of _rudis_ silver, after first being
roasted[40] until they melt, are smelted with mixed litharge and
hearth-lead, or else, after being moistened with water, they are smelted
with cakes made from pyrites and _cadmia_. By neither of these methods
do (the concentrates) fall back in the furnace, or fly out of it, driven
by the blast of the bellows and the agitation of the fire. If the
concentrates originated from galena they are smelted with it after
having been roasted; and if from pyrites, then with pyrites.

Pure copper ore, whether it is its own colour or is tinged with
chrysocolla or azure, and copper glance, or grey or black _rudis_
copper, is smelted in a furnace of which the tap-hole is closed for a
very short time, or else is always open[41]. If there is a large amount
of silver in the ore it is run into the forehearth, and the greater part
of the silver is absorbed by the molten lead, and the remainder is sold
with the copper to the proprietor of the works in which silver is parted
from copper[42]. If there is a small amount of silver in the ore, no
lead is put into the forehearth to absorb the silver, and the
above-mentioned proprietors buy it in with the copper; if there be no
silver, copper is made direct. If such copper ore contains some minerals
which do not easily melt, as pyrites or _cadmia metallica fossilis_[43],
or stone from which iron is melted, then crude pyrites which easily fuse
are added to it, together with slag. From this charge, when smelted,
they make cakes; and from these, when they have been roasted as much as
is necessary and re-smelted, the copper is made. But if there be some
silver in the cakes, for which an outlay of lead has to be made, then it
is first run into the forehearth, and the molten lead absorbs the
silver.

Indeed, _rudis_ copper ore of inferior quality, whether ash-coloured or
purple, blackish and occasionally in parts blue, is smelted in the first
furnace whose tap-hole is always open. This is the method of the
Tyrolese. To as much _rudis_ copper ore as will fill eighteen vessels,
each of which holds almost as much as seven Roman _moduli_[44], the
first smelter--for there are three--adds three cartloads of lead slags,
one cartload of schist, one fifth of a _centumpondium_ of stones which
easily fuse in the fire, besides a small quantity of concentrates
collected from copper slag and accretions, all of which he smelts for
the space of twelve hours, and from which he makes six _centumpondia_ of
primary cakes and one-half of a _centumpondium_ of alloy. One half of
the latter consists of copper and silver, and it settles to the bottom
of the forehearth. In every _centumpondium_ of the cakes there is half a
_libra_ of silver and sometimes half an _uncia_ besides; in the half of
a _centumpondium_ of the alloy there is a _bes_ or three-quarters of
silver. In this way every week, if the work is for six days, thirty-six
_centumpondia_ of cakes are made and three _centumpondia_ of alloy, in
all of which there is often almost twenty-four _librae_ of silver. The
second smelter separates from the primary cakes the greater part of the
silver by absorbing it in lead. To eighteen _centumpondia_ of cakes made
from crude copper ore, he adds twelve _centumpondia_ of hearth-lead and
litharge, three _centumpondia_ of stones from which lead is smelted,
five _centumpondia_ of hard cakes rich in silver, and two _centumpondia_
of exhausted liquation cakes[45]; he adds besides, some of the slags
resulting from smelting crude copper, together with a small quantity of
concentrates made from accretions, all of which he melts for the space
of twelve hours, and makes eighteen _centumpondia_ of secondary cakes,
and twelve _centumpondia_ of copper-lead-silver alloy; in each
_centumpondium_ of the latter there is half a _libra_ of silver. After
he has taken off the cakes with a hooked bar, he pours the alloy out
into copper or iron moulds; by this method they make four cakes of
alloy, which are carried to the works in which silver is parted from
copper. On the following day, the same smelter, taking eighteen
_centumpondia_ of the secondary cakes, again adds twelve _centumpondia_
of hearth-lead and litharge, three _centumpondia_ of stones from which
lead is smelted, five _centumpondia_ of hard cakes rich in silver,
together with slags from the smelting of the primary cakes, and with
concentrates washed from the accretions which are usually made at that
time. This charge is likewise smelted for the space of twelve hours, and
he makes as many as thirteen _centumpondia_ of tertiary cakes and eleven
_centumpondia_ of copper-lead-silver alloy, each _centumpondium_ of
which contains one-third of a _libra_ and half an _uncia_ of silver.
When he has skimmed off the tertiary cakes with a hooked bar, the alloy
is poured into copper moulds, and by this method four cakes of alloy are
made, which, like the preceding four cakes of alloy, are carried to the
works in which silver is parted from copper. By this method the second
smelter makes primary cakes on alternate days and secondary cakes on the
intermediate days. The third smelter takes eleven cartloads of the
tertiary cakes and adds to them three cartloads of hard cakes poor in
silver, together with the slag from smelting the secondary cakes, and
the concentrates from the accretions which are usually made at that
time. From this charge when smelted, he makes twenty _centumpondia_ of
quaternary cakes, which are called "hard cakes," and also fifteen
_centumpondia_ of those "hard cakes rich in silver," each
_centumpondium_ of which contains a third of a _libra_ of silver. These
latter cakes the second smelter, as I said before, adds to the primary
and secondary cakes when he re-melts them. In the same way, from eleven
cartloads of quaternary cakes thrice roasted, he makes the "final"
cakes, of which one _centumpondium_ contains only half an _uncia_ of
silver. In this operation he also makes fifteen _centumpondia_ of "hard
cakes poor in silver," in each _centumpondium_ of which is a sixth of a
_libra_ of silver. These hard cakes the third smelter, as I have said,
adds to the tertiary cakes when he re-smelts them, while from the
"final" cakes, thrice roasted and re-smelted, is made black copper[46].

The _rudis_ copper from which pure copper is made, if it contains little
silver or if it does not easily melt, is first smelted in the third
furnace of which the tap-hole is always open; and from this are made
cakes, which after being seven times roasted are re-smelted, and from
these copper is melted out; the cakes of copper are carried to a furnace
of another kind, in which they are melted for the third time, in order
that in the copper "bottoms" there may be more silver, while in the
"tops" there may be less, which process is explained in Book XI.

Pyrites, when they contain not only copper, but also silver, are
smelted in the manner I described when I treated of ores of silver. But
if they are poor in silver, and if the copper which is melted out of
them cannot easily be treated, they are smelted according to the method
which I last explained.

Finally, the copper schists containing bitumen or sulphur are roasted,
and then smelted with stones which easily fuse in a fire of the second
order, and are made into cakes, on the top of which the slags float.
From these cakes, usually roasted seven times and re-melted, are melted
out slags and two kinds of cakes; one kind is of copper and occupies the
bottom of the crucible, and these are sold to the proprietors of the
works in which silver is parted from copper; the other kind of cakes are
usually re-melted with primary cakes. If the schist contains but a small
amount of copper, it is burned, crushed under the stamps, washed and
sieved, and the concentrates obtained from it are melted down; from this
are made cakes from which, when roasted, copper is made. If either
chrysocolla or azure, or yellow or black earth containing copper and
silver, adheres to the schist, it is not washed, but is crushed and
smelted with stones which easily fuse in fire of the second order.

Lead ore, whether it be _molybdaena_[47], pyrites, (galena?) or stone
from which it is melted, is often smelted in a special furnace, of which
I have spoken above, but no less often in the third furnace of which the
tap-hole is always open. The hearth and forehearth are made from powder
containing a small portion of iron hammer-scales; iron slag forms the
principal flux for such ores; both of these the expert smelters consider
useful and to the owner's advantage, because it is the nature of iron to
attract lead. If it is _molybdaena_ or the stone from which lead is
smelted, then the lead runs down from the furnace into the forehearth,
and when the slags have been skimmed off, the lead is poured out with a
ladle. If pyrites are smelted, the first to flow from the furnace into
the forehearth, as may be seen at Goslar, is a white molten substance,
injurious and noxious to silver, for it consumes it. For this reason the
slags which float on the top having been skimmed off, this substance is
poured out; or if it hardens, then it is taken out with a hooked bar;
and the walls of the furnace exude the same substance[48]. Then the
_stannum_ runs out of the furnace into the forehearth; this is an alloy
of lead and silver. From the silver-lead alloy they first skim off the
slags, not rarely white, as some pyrites[49] are, and afterward they
skim off the cakes of pyrites, if there are any. In these cakes there is
usually some copper; but since there is usually but a very small
quantity, and as the forest charcoal is not abundant, no copper is made
from them. From the silver-lead poured into iron moulds they likewise
make cakes; when these cakes have been melted in the cupellation
furnace, the silver is parted from the lead, because part of the lead is
transformed into litharge and part into hearth-lead, from which in the
blast furnace on re-melting they make de-silverized lead, for in this
lead each _centumpondium_ contains only a _drachma_ of silver, when
before the silver was parted from it each _centumpondium_ contained more
or less than three _unciae_ of silver[50].

The little black stones[51] and others from which tin is made, are
smelted in their own kind of furnace, which should be narrower than the
other furnaces, that there may be only the small fire which is necessary
for this ore. These furnaces are higher, that the height may compensate
for the narrowness and make them of almost the same capacity as the
other furnaces. At the top, in front, they are closed and on the other
side they are open, where there are steps, because they cannot have the
steps in front on account of the forehearth; the smelters ascend by
these steps to put the tin-stone into the furnace. The hearth of the
furnace is not made of powdered earth and charcoal, but on the floor of
the works are placed sandstones which are not too hard; these are set on
a slight slope, and are two and three-quarters feet long, the same
number of feet wide, and two feet thick, for the thicker they are the
longer they last in the fire. Around them is constructed a rectangular
furnace eight or nine feet high, of broad sandstones, or of those common
substances which by nature are composed of diverse materials[52]. On the
inside the furnace is everywhere evenly covered with lute. The upper
part of the interior is two feet long and one foot wide, but below it is
not so long and wide. Above it are two hood-walls, between which the
fumes ascend from the furnace into the dust chamber, and through this
they escape by a narrow opening in the roof. The sandstones are sloped
at the bed of the furnace, so that the tin melted from the tin-stone may
flow through the tap-hole of the furnace into the forehearth.[53]

As there is no need for the smelters to have a fierce fire, it is not
necessary to place the nozzles of the bellows in bronze or iron pipes,
but only through a hole in the furnace wall. They place the bellows
higher at the back so that the blast from the nozzles may blow straight
toward the tap-hole of the furnace. That it may not be too fierce, the
nozzles are wide, for if the fire were fiercer, tin could not be melted
out from the tin-stone, as it would be consumed and turned into ashes.
Near the steps is a hollowed stone, in which is placed the tin-stone to
be smelted; as often as the smelter throws into the furnace an iron
shovel-ful of this tin-stone, he puts on charcoal that was first put
into a vat and washed with water to be cleansed from the grit and small
stones which adhere to it, lest they melt at the same time as the
tin-stone and obstruct the tap-hole and impede the flow of tin from the
furnace. The tap-hole of the furnace is always open; in front of it is a
forehearth a little more than half a foot deep, three-quarters of two
feet long and one foot wide; this is lined with lute, and the tin from
the tap-hole flows into it. On one side of the forehearth is a low wall,
three-quarters of a foot wider and one foot longer than the forehearth,
on which lies charcoal powder. On the other side the floor of the
building slopes, so that the slags may conveniently run down and be
carried away. As soon as the tin begins to run from the tap-hole of the
furnace into the forehearth, the smelter scrapes down some of the
powdered charcoal into it from the wall, so that the slags may be
separated from the hot metal, and so that it may be covered, lest any
part of it, being very hot, should fly away with the fumes. If after the
slag has been skimmed off, the powder does not cover up the whole of the
tin, the smelter draws a little more charcoal off the wall with a
scraper. After he has opened the tap-hole of the forehearth with a
tapping-bar, in order that the tin can flow into the tapping-pot,
likewise smeared with lute, he again closes the tap-hole with pure lute
or lute mixed with powdered charcoal. The smelter, if he be diligent and
experienced, has brooms at hand with which he sweeps down the walls
above the furnace; to these walls and to the dust chamber minute
tin-stones sometimes adhere with part of the fumes. If he be not
sufficiently experienced in these matters and has melted at the same
time all of the tin-stone,--which is commonly of three sizes, large,
medium, and very small,--not a little waste of the proprietor's tin
results; because, before the large or the medium sizes have melted, the
small have either been burnt up in the furnace, or else, flying up from
it, they not only adhere to the walls but also fall in the dust chamber.
The owner of the works has the sweepings by right from the owner of the
ore. For the above reasons the most experienced smelter melts them down
separately; indeed, he melts the very small size in a wider furnace, the
medium in a medium-sized furnace, and the largest size in the narrowest
furnace. When he melts down the small size he uses a gentle blast from
the bellows, with the medium-sized a moderate one, with the large size a
violent blast; and when he smelts the first size he needs a slow fire,
for the second a medium one, and for the third a fierce one; yet he uses
a much less fierce fire than when he smelts the ores of gold, silver, or
copper. When the workmen have spent three consecutive days and nights in
this work, as is usual, they have finished their labours; in this time
they are able to melt out a large weight of small sized tin-stone which
melts quickly, but less of the large ones which melt slowly, and a
moderate quantity of the medium-sized which holds the middle course.
Those who do not smelt the tin-stone in furnaces made sometimes wide,
sometimes medium, or sometimes narrow, in order that great loss should
not be occasioned, throw in first the smallest size, then the medium,
then the large size, and finally those which are not quite pure; and the
blast of the bellows is altered as required. In order that the tin-stone
thrown into the furnace should not roll off from the large charcoal into
the forehearth before the tin is melted out of it, the smelter uses
small charcoal; first some of this moistened with water is placed in the
furnace, and then he frequently repeats this succession of charcoal and
tin-stone.

The tin-stone, collected from material which during the summer was
washed in a ditch through which a stream was diverted, and during the
winter was screened on a perforated iron plate, is smelted in a furnace
a palm wider than that in which the fine tin-stone dug out of the earth
is smelted. For the smelting of these, a more vigorous blast of the
bellows and a fiercer fire is needed than for the smelting of the large
tin-stone. Whichever kind of tin-stone is being smelted, if the tin
first flows from the furnace, much of it is made, and if slags first
flow from the furnace, then only a little. It happens that the tin-stone
is mixed with the slags when it is either less pure or ferruginous--that
is, not enough roasted--and is imperfect when put into the furnace, or
when it has been put in in a larger quantity than was necessary; then,
although it may be pure and melt easily, the ore either runs out of the
furnace at the same time, mixed with the slags, or else it settles so
firmly at the bottom of the furnace that the operation of smelting being
necessarily interrupted, the furnace freezes up.

[Illustration 415 (Tin smelting Furnaces): A--Furnace. B--Its tap-hole.
C--Forehearth. D--Its tap-hole. E--Slags. F--Scraper. G--Dipping-pot.
H--Walls of the chimney. I--Broom. K--Copper plate. L--Latticework bars.
M--Iron seal or die. N--Hammer.]

The tap-hole of the forehearth is opened and the tin is diverted into
the dipping-pot, and as often as the slags flow down the sloping floor
of the building they are skimmed off with a rabble; as soon as the tin
has run out of the forehearth, the tap-hole is again closed up with lute
mixed with powdered charcoal. Glowing coals are put in the dipping-pot
so that the tin, after it has run out, should not get chilled. If the
metal is so impure that nothing can be made from it, the material which
has run out is made into cakes to be re-smelted in the hearth, of which
I shall have something to say later; if the metal is pure, it is poured
immediately upon thick copper plates, at first in straight lines and
then transversely over these to make a lattice. Each of these lattice
bars is impressed with an iron die; if the tin was melted out of ore
excavated from mines, then one stamp only, namely, that of the
Magistrate, is usually imprinted, but if it is made from tin-stone
collected on the ground after washing, then it is impressed with two
seals, one the Magistrate's and the other a fork which the washers use.
Generally, three of this kind of lattice bars are beaten and amalgamated
into one mass with a wooden mallet.

The slags that are skimmed off are afterward thrown with an iron shovel
into a small trough hollowed from a tree, and are cleansed from
charcoal by agitation; when taken out they are broken up with a square
iron mallet, and then they are re-melted with the fine tin-stone next
smelted. There are some who crush the slags three times under wet stamps
and re-melt them three times; if a large quantity of this be smelted
while still wet, little tin is melted from it, because the slag, soon
melted again, flows from the furnace into the forehearth. Under the wet
stamps are also crushed the lute and broken rock with which such
furnaces are lined, and also the accretions, which often contain fine
tin-stone, either not melted or half-melted, and also prills of tin. The
tin-stone not yet melted runs out through the screen into a trough, and
is washed in the same way as tin-stone, while the partly melted and the
prills of tin are taken from the mortar-box and washed in the sieve on
which not very minute particles remain, and thence to the canvas strake.
The soot which adheres to that part of the chimney which emits the
smoke, also often contains very fine tin-stone which flies from the
furnace with the fumes, and this is washed in the strake which I have
just mentioned, and in other sluices. The prills of tin and the partly
melted tin-stone that are contained in the lute and broken rock with
which the furnace is lined, and in the remnants of the tin from the
forehearth and the dipping-pot, are smelted together with the tin-stone.

When tin-stone has been smelted for three days and as many nights in a
furnace prepared as I have said above, some little particles of the rock
from which the furnace is constructed become loosened by the fire and
fall down; and then the bellows being taken away, the furnace is broken
through at the back, and the accretions are first chipped off with
hammers, and afterward the whole of the interior of the furnace is
re-fitted with the prepared sandstone, and again evenly lined with lute.
The sandstone placed on the bed of the furnace, if it has become faulty,
is taken out, and another is laid down in its place; those rocks which
are too large the smelter chips off and fits with a sharp pick.

[Illustration 417 (Tin smelting Furnaces): A--Furnaces. B--Forehearths.
C--Their tap-holes. D--Dipping-pots. E--Pillars. F--Dust-chamber.
G--Window. H--Chimneys. I--Tub in which the coals are washed.]

Some build two furnaces against the wall just like those I have
described, and above them build a vaulted ceiling supported by the wall
and by four pillars. Through holes in the vaulted ceiling the fumes from
the furnaces ascend into a dust chamber, similar to the one described
before, except that there is a window on each side and there is no door.
The smelters, when they have to clear away the flue-dust, mount by the
steps at the side of the furnaces, and climb by ladders into the dust
chamber through the apertures in the vaulted ceilings over the furnaces.
They then remove the flue-dust from everywhere and collect it in
baskets, which are passed from one to the other and emptied. This dust
chamber differs from the other described, in the fact that the chimneys,
of which it has two, are not dissimilar to those of a house; they
receive the fumes which, being unable to escape through the upper part
of the chamber, are turned back and re-ascend and release the tin; thus
the tin set free by the fire and turned to ash, and the little
tin-stones which fly up with the fumes, remain in the dust chamber or
else adhere to copper plates in the chimney.

[Illustration 418 (Refining Tin): A--Hearths. B--Dipping-pots. C--Wood.
D--Cakes. E--Ladle. F--Copper plate. G--Lattice-shaped bars. H--Iron
dies. I--Wooden mallet. K--Mass of tin bars. L--Shovel.]

If the tin is so impure that it cracks when struck with the hammer, it
is not immediately made into lattice-like bars, but into the cakes which
I have spoken of before, and these are refined by melting again on a
hearth. This hearth consists of sandstones, which slope toward the
centre and a little toward a dipping-pot; at their joints they are
covered with lute. Dry logs are arranged on each side, alternately
upright and lengthwise, and more closely in the middle; on this wood are
placed five or six cakes of tin which all together weigh about six
_centumpondia_; the wood having been kindled, the tin drips down and
flows continuously into the dipping-pot which is on the floor. The
impure tin sinks to the bottom of this dipping-pot and the pure tin
floats on the top; then both are ladled out by the master, who first
takes out the pure tin, and by pouring it over thick plates of copper
makes lattice-like bars. Afterward he takes out the impure tin from
which he makes cakes; he discriminates between them, when he ladles and
pours, by the ease or difficulty of the flow. One _centumpondium_ of the
lattice-like bars sells for more than a _centumpondium_ of cakes, for
the price of the former exceeds the price of the latter by a gold
coin[54]. These lattice-like bars are lighter than the others, and when
five of them are pounded and amalgamated with a wooden mallet, a mass is
made which is stamped with an iron die. There are some who do not make a
dipping-pot on the floor for the tin to run into, but in the hearth
itself; out of this the master, having removed the charcoal, ladles the
tin and pours it over the copper-plate. The dross which adheres to the
wood and the charcoal, having been collected, is re-smelted in the
furnace.

[Illustration 419 (Blast Furnaces): A--Furnace. B--Bellows. C--Iron
Disc. D--Nozzle. E--Wooden Disc. F--Blow-hole. G--Handle. H--Haft.
I--Hoops. K--Masses of tin.]

Some of the Lusitanians melt tin from tin-stone in small furnaces. They
use round bellows made of leather, of which the fore end is a round iron
disc and the rear end a disc of wood; in a hole in the former is fixed
the nozzle, in the middle of the latter the blow-hole. Above this is the
handle or haft, which draws open the round bellows and lets in the air,
or compresses it and drives the air out. Between the discs are several
iron hoops to which the leather is fastened, making such folds as are to
be seen in paper lanterns that are folded together. Since this kind of
bellows does not give a vigorous blast, because they are drawn apart and
compressed slowly, the smelter is not able during a whole day to smelt
much more than half a _centumpondium_ of tin.

[Illustration 422 (Iron smelting Furnaces): A--Hearth. B--Heap.
C--Slag-vent. D--Iron mass. E--Wooden mallets. F--Hammer. G--Anvil.]

Very good iron ore is smelted[55] in a furnace almost like the
cupellation furnace. The hearth is three and a half feet high, and five
feet long and wide; in the centre of it is a crucible a foot deep and
one and a half feet wide, but it may be deeper or shallower, wider or
narrower, according to whether more or less ore is to be made into iron.
A certain quantity of iron ore is given to the master, out of which he
may smelt either much or little iron. He being about to expend his skill
and labour on this matter, first throws charcoal into the crucible, and
sprinkles over it an iron shovel-ful of crushed iron ore mixed with
unslaked lime. Then he repeatedly throws on charcoal and sprinkles it
with ore, and continues this until he has slowly built up a heap; it
melts when the charcoal has been kindled and the fire violently
stimulated by the blast of the bellows, which are skilfully fixed in a
pipe. He is able to complete this work sometimes in eight hours,
sometimes in ten; and again sometimes in twelve. In order that the heat
of the fire should not burn his face, he covers it entirely with a cap,
in which, however, there are holes through which he may see and breathe.
At the side of the hearth is a bar which he raises as often as is
necessary, when the bellows blow too violent a blast, or when he adds
more ore and charcoal. He also uses the bar to draw off the slags, or to
open or close the gates of the sluice, through which the waters flow
down on to the wheel which turns the axle that compresses the bellows.
In this sensible way, iron is melted out and a mass weighing two or
three _centumpondia_ may be made, providing the iron ore was rich. When
this is done the master opens the slag-vent with the tapping-bar, and
when all has run out he allows the iron mass to cool. Afterward he and
his assistant stir the iron with the bar, and then in order to chip off
the slags which had until then adhered to it, and to condense and
flatten it, they take it down from the furnace to the floor, and beat it
with large wooden mallets having slender handles five feet long.
Thereupon it is immediately placed on the anvil, and repeatedly beaten
by the large iron hammer that is raised by the cams of an axle turned by
a water-wheel. Not long afterward it is taken up with tongs and placed
under the same hammer, and cut up with a sharp iron into four, five, or
six pieces, according to whether it is large or small. These pieces,
after they have been re-heated in the blacksmith's forge and again
placed on the anvil, are shaped by the smith into square bars or into
ploughshares or tyres, but mainly into bars. Four, six, or eight of
these bars weigh one-fifth of a _centumpondium_, and from these they
make various implements. During the blows from the hammer by which it is
shaped by the smith, a youth pours water with a ladle on to the glowing
iron, and this is why the blows make such a loud sound that they may be
heard a long distance from the works. The masses, if they remain and
settle in the crucible of the furnace in which the iron is smelted,
become hard iron which can only be hammered with difficulty, and from
these they make the iron-shod heads for the stamps, and such-like very
hard articles.

[Illustration 424 (Iron smelting Furnaces): A--Furnace. B--Stairs.
C--Ore. D--Charcoal.]

But to iron ore which is cupriferous, or which when heated[56] melts
with difficulty, it is necessary for us to give a fiercer fire and more
labour; because not only must we separate the parts of it in which there
is metal from those in which there is no metal, and break it up by dry
stamps, but we must also roast it, so that the other metals and noxious
juices may be exhaled; and we must wash it, so that the lighter parts
may be separated from it. Such ores are smelted in a furnace similar to
the blast furnace, but much wider and higher, so that it may hold a
great quantity of ore and much charcoal; mounting the stairs at the side
of the furnace, the smelters fill it partly with fragments of ore not
larger than nuts, and partly with charcoal; and from this kind of ore
once or twice smelted they make iron which is suitable for re-heating in
the blacksmith's forge, after it is flattened out with the large iron
hammer and cut into pieces with the sharp iron.

[Illustration 425 (Steel making Furnaces): A--Forge. B--Bellows.
C--Tongs. D--Hammer. E--Cold stream.]

By skill with fire and fluxes is made that kind of iron from which steel
is made, which the Greeks call [Greek: stomoma]. Iron should be selected
which is easy to melt, is hard and malleable. Now although iron may be
smelted from ore which contains other metals, yet it is then either soft
or brittle; such (iron) must be broken up into small pieces when it is
hot, and then mixed with crushed stone which melts. Then a crucible is
made in the hearth of the smith's furnace, from the same moistened
powder from which are made the forehearths in front of the furnaces in
which ores of gold or silver are smelted; the width of this crucible is
about one and a half feet and the depth one foot. The bellows are so
placed that the blast may be blown through the nozzle into the middle of
the crucible. Then the whole of the crucible is filled with the best
charcoal, and it is surrounded by fragments of rock to hold in place the
pieces of iron and the superimposed charcoal. As soon as all the
charcoal is kindled and the crucible is glowing, a blast is blown from
the bellows and the master pours in gradually as much of the mixture of
iron and flux as he wishes. Into the middle of this, when it is melted,
he puts four iron masses each weighing thirty pounds, and heats them for
five or six hours in a fierce fire; he frequently stirs the melted iron
with a bar, so that the small pores in each mass absorb the minute
particles, and these particles by their own strength consume and expand
the thick particles of the masses, which they render soft and similar to
dough. Afterward the master, aided by his assistant, takes out a mass
with the tongs and places it on the anvil, where it is pounded by the
hammer which is alternately raised and dropped by means of the
water-wheel; then, without delay, while it is still hot, he throws it
into water and tempers it; when it is tempered, he places it again on
the anvil, and breaks it with a blow from the same hammer. Then at once
examining the fragments, he decides whether the iron in some part or
other, or as a whole, appears to be dense and changed into steel; if so,
he seizes one mass after another with the tongs, and taking them out he
breaks them into pieces. Afterward he heats the mixture up again, and
adds a portion afresh to take the place of that which has been absorbed
by the masses. This restores the energy of that which is left, and the
pieces of the masses are again put back into the crucible and made
purer. Each of these, after having been heated, is seized with the
tongs, put under the hammer and shaped into a bar. While they are still
glowing, he at once throws them into the very coldest nearby running
water, and in this manner, being suddenly condensed, they are changed
into pure steel, which is much harder and whiter than iron.

The ores of the other metals are not smelted in furnaces. Quicksilver
ores and also antimony are melted in pots, and bismuth in troughs.

[Illustration 427 (Quicksilver distillation Furnaces): A--Hearth.
B--Poles. C--Hearth without fire in which the pots are placed. D--Rocks.
E--Rows of pots. F--Upper pots. G--Lower pots.]

I will first speak of quicksilver. This is collected when found in pools
formed from the outpourings of the veins and stringers; it is cleansed
with vinegar and salt, and then it is poured into canvas or soft
leather, through which, when squeezed and compressed, the quicksilver
runs out into a pot or pan. The ore of quicksilver is reduced in double
or single pots. If in double pots, then the upper one is of a shape not
very dissimilar to the glass ampullas used by doctors, but they taper
downward toward the bottom, and the lower ones are little pots similar
to those in which men and women make cheese, but both are larger than
these; it is necessary to sink the lower pots up to the rims in earth,
sand, or ashes. The ore, broken up into small pieces is put into the
upper pots; these having been entirely closed up with moss, are placed
upside down in the openings of the lower pots, where they are joined
with lute, lest the quicksilver which takes refuge in them should be
exhaled. There are some who, after the pots have been buried, do not
fear to leave them uncemented, and who boast that they are able to
produce no less weight of quicksilver than those who do cement them, but
nevertheless cementing with lute is the greatest protection against
exhalation. In this manner seven hundred pairs of pots are set together
in the ground or on a hearth. They must be surrounded on all sides with
a mixture consisting of crushed earth and charcoal, in such a way that
the upper pots protrude to a height of a palm above it. On both sides of
the hearth rocks are first laid, and upon them poles, across which the
workmen place other poles transversely; these poles do not touch the
pots, nevertheless the fire heats the quicksilver, which fleeing from
the heat is forced to run down through the moss into the lower pots. If
the ore is being reduced in the upper pots, it flees from them, wherever
there is an exit, into the lower pots, but if the ore on the contrary is
put in the lower pots the quicksilver rises into the upper pot or into
the operculum, which, together with the gourd-shaped vessels, are
cemented to the upper pots.

The pots, lest they should become defective, are moulded from the best
potters' clay, for if there are defects the quicksilver flies out in the
fumes. If the fumes give out a very sweet odour it indicates that the
quicksilver is being lost, and since this loosens the teeth, the
smelters and others standing by, warned of the evil, turn their backs to
the wind, which drives the fumes in the opposite direction; for this
reason, the building should be open around the front and the sides, and
exposed to the wind. If these pots are made of cast copper they last a
long time in the fire. This process for reducing the ores of quicksilver
is used by most people.

In a similar manner the antimony ore,[57] if free from other metals, is
reduced in upper pots which are twice as large as the lower ones. Their
size, however, depends on the cakes, which have not the same weight
everywhere; for in some places they are made to weigh six _librae_, in
other places ten, and elsewhere twenty. When the smelter has concluded
his operation, he extinguishes the fire with water, removes the lids
from the pots, throws earth mixed with ash around and over them, and
when they have cooled, takes out the cakes from the pots.

[Illustration 429 (Quicksilver distillation Furnaces): A--Pots.
B--Opercula. C--Nozzles. D--Gourd-shaped earthenware vessels.]

Other methods for reducing quicksilver are given below. Big-bellied
pots, having been placed in the upper rectangular open part of a
furnace, are filled with the crushed ore. Each of these pots is covered
with a lid with a long nozzle--commonly called a _campana_--in the shape
of a bell, and they are cemented. Each of the small earthenware vessels
shaped like a gourd receives two of these nozzles, and these are
likewise cemented. Dried wood having been placed in the lower part of
the furnace and kindled, the ore is heated until all the quicksilver has
risen into the operculum which is over the pot; it then flows from the
nozzle and is caught in the earthenware gourd-shaped vessel.

[Illustration 430 (Quicksilver distillation Furnaces): A--Enclosed
chamber. B--Door. C--Little windows. D--Mouths through the walls.
E--Furnace in the enclosed chamber. F--Pots.]

Others build a hollow vaulted chamber, of which the paved floor is made
concave toward the centre. Inside the thick walls of the chamber are the
furnaces. The doors through which the wood is put are in the outer part
of the same wall. They place the pots in the furnaces and fill them with
crushed ore, then they cement the pots and the furnaces on all sides
with lute, so that none of the vapour may escape from them, and there is
no entrance to the furnaces except through their mouths. Between the
dome and the paved floor they arrange green trees, then they close the
door and the little windows, and cover them on all sides with moss and
lute, so that none of the quicksilver can exhale from the chamber. After
the wood has been kindled the ore is heated, and exudes the
quicksilver; whereupon, impatient with the heat, and liking the cold, it
escapes to the leaves of the trees, which have a cooling power. When the
operation is completed the smelter extinguishes the fire, and when all
gets cool he opens the door and the windows, and collects the
quicksilver, most of which, being heavy, falls of its own accord from
the trees, and flows into the concave part of the floor; if all should
not have fallen from the trees, they are shaken to make it fall.

[Illustration 431 (Quicksilver distillation Furnaces): A--Larger pot.
B--Smaller. C--Tripod. D--Tub in which the sand is washed.]

The following is the fourth method of reducing ores of quicksilver. A
larger pot standing on a tripod is filled with crushed ore, and over the
ore is put sand or ashes to a thickness of two digits, and tamped; then
in the mouth of this pot is inserted the mouth of another smaller pot
and cemented with lute, lest the vapours are emitted. The ore heated by
the fire exhales the quicksilver, which, penetrating through the sand or
the ashes, takes refuge in the upper pot, where condensing into drops it
falls back into the sand or the ashes, from which the quicksilver is
washed and collected.

[Illustration 432 (Quicksilver distillation Furnaces): A--Pots. B--Lids.
C--Stones. D--Furnace.]

The fifth method is not very unlike the fourth. In the place of these
pots are set other pots, likewise of earthenware, having a narrow bottom
and a wide mouth. These are nearly filled with crushed ore, which is
likewise covered with ashes to a depth of two digits and tamped in. The
pots are covered with lids a digit thick, and they are smeared over on
the inside with liquid litharge, and on the lid are placed heavy stones.
The pots are set on the furnace, and the ore is heated and similarly
exhales quicksilver, which fleeing from the heat takes refuge in the
lid; on congealing there, it falls back into the ashes, from which, when
washed, the quicksilver is collected.

By these five methods quicksilver may be made, and of these not one is
to be despised or repudiated; nevertheless, if the mine supplies a great
abundance of ore, the first is the most expeditious and practical,
because a large quantity of ore can be reduced at the same time without
great expense.[58]

[Illustration 434 (Bismuth Smelting): A--Pit across which wood is
placed. B--Forehearth. C--Ladle. D--Iron mould. E--Cakes. F--Empty pot
lined with stones in layers. G--Troughs. H--Pits dug at the foot of the
troughs. I--Small wood laid over the troughs. K--Wind.]

Bismuth[59] ore, free from every kind of silver, is smelted by various
methods. First a small pit is dug in the dry ground; into this
pulverised charcoal is thrown and tamped in, and then it is dried with
burning charcoal. Afterward, thick dry pieces of beech wood are placed
over the pit, and the bismuth ore is thrown on it. As soon as the
kindled wood burns, the heated ore drips with bismuth, which runs down
into the pit, from which when cooled the cakes are removed. Because
pieces of burnt wood, or often charcoal and occasionally slag, drop into
the bismuth which collects in the pit, and make it impure, it is put
back into another kind of crucible to be melted, so that pure cakes may
be made. There are some who, bearing these things in mind, dig a pit on
a sloping place and below it put a forehearth, into which the bismuth
continually flows, and thus remains clean; then they take it out with
ladles and pour it into iron pans lined inside with lute, and make cakes
of it. They cover such pits with flat stones, whose joints are besmeared
with a lute of mixed dust and crushed charcoal, lest the joints should
absorb the molten bismuth. Another method is to put the ore in troughs
made of fir-wood and placed on sloping ground; they place small firewood
over it, kindling it when a gentle wind blows, and thus the ore is
heated. In this manner the bismuth melts and runs down from the troughs
into a pit below, while there remains slag, or stones, which are of a
yellow colour, as is also the wood laid across the pit. These are also
sold.

[Illustration 435 (Bismuth Smelting): A--Wood. B--Bricks. C--Pans.
D--Furnace. E--Crucible. F--Pipe. G--Dipping-pot.]

Others reduce the ore in iron pans as next described. They lay small
pieces of dry wood alternately straight and transversely upon bricks,
one and a half feet apart, and set fire to it. Near it they put small
iron pans lined on the inside with lute, and full of broken ore; then
when the wind blows the flame of the fierce fire over the pans, the
bismuth drips out of the ore; wherefore, in order that it may run, the
ore is stirred with the tongs; but when they decide that all the bismuth
is exuded, they seize the pans with the tongs and remove them, and pour
out the bismuth into empty pans, and by turning many into one they make
cakes. Others reduce the ore, when it is not mixed with _cadmia_,[60] in
a furnace similar to the iron furnace. In this case they make a pit and
a crucible of crushed earth mixed with pulverised charcoal, and into it
they put the broken ore, or the concentrates from washing, from which
they make more bismuth. If they put in ore, they reduce it with charcoal
and small dried wood mixed, and if concentrates, they use charcoal only;
they blow both materials with a gentle blast from a bellows. From the
crucible is a small pipe through which the molten bismuth runs down into
a dipping-pot, and from this cakes are made.

[Illustration 436 (Bismuth Smelting): A--Hearth in which ore is melted.
B--Hearth on which lie drops of bismuth. C--Tongs. D--Basket. E--Wind.]

On a dump thrown up from the mines, other people construct a hearth
exposed to the wind, a foot high, three feet wide, and four and a half
feet long. It is held together by four boards, and the whole is thickly
coated at the top with lute. On this hearth they first put small dried
sticks of fir wood, then over them they throw broken ore; then they lay
more wood over it, and when the wind blows they kindle it. In this
manner the bismuth drips out of the ore, and afterward the ashes of the
wood consumed by the fire and the charcoals are swept away. The drops of
bismuth which fall down into the hearth are congealed by the cold, and
they are taken away with the tongs and thrown into a basket. From the
melted bismuth they make cakes in iron pans.

[Illustration 437 (Bismuth Smelting): A--Box. B--Pivot. C--Transverse
wood beams. D--Grate. E--Its feet. F--Burning wood. G--Stick. H--Pans in
which the bismuth is melted. I--Pans for moulds. K--Cakes. L--Fork.
M--Brush.]

Others again make a box eight feet long, four feet wide, and two feet
high, which they fill almost full of sand and cover with bricks, thus
making the hearth. The box has in the centre a wooden pivot, which turns
in a hole in two beams laid transversely one upon the other; these beams
are hard and thick, are sunk into the ground, both ends are perforated,
and through these holes wedge-shaped pegs are driven, in order that the
beams may remain fixed, and that the box may turn round, and may be
turned toward the wind from whichever quarter of the sky in may blow. In
such a hearth they put an iron grate, as long and wide as the box and
three-quarters of a foot high; it has six feet, and there are so many
transverse bars that they almost touch one another. On the grate they
lay pine-wood and over it broken ore, and over this they again lay
pine-wood. When it has been kindled the ore melts, out of which the
bismuth drips down; since very little wood is burned, this is the most
profitable method of smelting the bismuth. The bismuth drips through the
grate on to the hearth, while the other things remain upon the grate
with the charcoal. When the work is finished, the workman takes a stick
from the hearth and overturns the grate, and the things which have been
accumulated on it; with the brush he sweeps up the bismuth and collects
it in a basket, and then he melts it in an iron pan and makes cakes. As
soon as possible after it is cool, he turns the pans over, so that the
cakes may fall out, using for this purpose a two-pronged fork of which
one prong is again forked. And immediately afterward he returns to his
labours.

     END OF BOOK IX.


FOOTNOTES:

[1] The history of the fusion of ores and of metals is the history of
individual processes, and such information as we have been able to
discover upon the individual methods previous to Agricola we give on the
pages where such processes are discussed. In general the records of the
beginnings of metallurgy are so nebular that, if one wishes to shirk the
task, he can adopt the explanation of William Pryce one hundred and
fifty years ago: "It is very probable that the nature and use of Metals
were not revealed to Adam in his state of innocence: the toil and labour
necessary to procure and use those implements of the iron age could not
be known, till they made part of the curse incurred by his fall: 'In the
sweat of thy face shalt thou eat bread, till thou return unto the
ground; in sorrow shalt thou eat of it all the days of thy life'
(Genesis). That they were very early discovered, however, is manifest
from the Mosaick account of Tubal Cain, who was the first instructor of
every artificer in Brass [_sic_] and Iron" (_Mineralogia Cornubiensis_,
p. 2).

It is conceivable that gold could be found in large enough pieces to
have had general use in pre-historic times, without fusion; but copper,
which was also in use, must have been smelted, and therefore we must
assume a considerable development of human knowledge on the subject
prior to any human record. Such incidental mention as exists after
record begins does not, of course, extend to the beginning of any
particular branch of the art--in fact, special arts obviously existed
long before such mention, and down to the complete survey of the state
of the art by Agricola our dates are necessarily "prior to" some first
mention in literature, or "prior to" the known period of existing
remains of metallurgical operations. The scant Egyptian records, the
Scriptures, and the Shoo King give a little insight prior to 1000 B.C.
The more extensive Greek literature of about the 5th to the 3rd
centuries B.C., together with the remains of Greek mines, furnish
another datum point of view, and the Roman and Greek writers at the
beginning of the Christian era give a still larger view. After them our
next step is to the Monk Theophilus and the Alchemists, from the 12th to
the 14th centuries. Finally, the awakening of learning at the end of the
15th and the beginning of the 16th centuries, enables us for the first
time to see practically all that was known. The wealth of literature
which exists subsequent to this latter time makes history thereafter a
matter of some precision, but it is not included in this undertaking.
Considering the great part that the metals have played in civilization,
it is astonishing what a minute amount of information is available on
metallurgy. Either the ancient metallurgists were secretive as to their
art, or the ancient authors despised such common things, or, as is
equally probable, the very partial preservation of ancient literature,
by painful transcription over a score of centuries, served only for
those works of more general interest. In any event, if all the direct or
indirect material on metallurgy prior to the 15th century were compiled,
it would not fill 40 pages such as these.

It may be of service to give a tabular summary indicating approximately
the time when evidence of particular operations appear on the historical
horizon:

  Gold washed from alluvial                            Prior to recorded
                                                         civilization

  Copper reduced from ores by smelting                 Prior to recorded
                                                         civilization

  Bitumen mined and used                               Prior to recorded
                                                         civilization

  Tin reduced from ores by smelting                    Prior to 3500 B.C.

  Bronze made                                          Prior to 3500 B.C.

  Iron reduced from ores by smelting                   Prior to 3500 B.C.

  Soda mined and used                                  Prior to 3500 B.C.

  Gold reduced from ores by concentration              Prior to 2500 B.C.

  Silver reduced from ores by smelting                 Prior to 2000 B.C.

  Lead reduced from ores by smelting                   Prior to 2000 B.C.
                                                         (perhaps prior
                                                          to 3500 B.C.)

  Silver parted from lead by cupellation               Prior to 2000 B.C.

  Bellows used in furnaces                             Prior to 1500 B.C.

  Steel produced                                       Prior to 1000 B.C.

  Base metals separated from ores by water             Prior to 500 B.C.
      concentration

  Gold refined by cupellation                          Prior to 500 B.C.

  Sulphide ores smelted for lead                       Prior to 500 B.C.

  Mercury reduced from ores by (?)                     Prior to 400 B.C.

  White-lead made with vinegar                         Prior to 300 B.C.

  Touchstone known for determining gold and silver     Prior to 300 B.C.
      fineness

  Quicksilver reduced from ore by distillation         Prior to Christian Era

  Silver parted from gold by cementation with salt     Prior to   "        "

  Brass made by cementation of copper and calamine     Prior to   "        "

  Zinc oxides obtained from furnace fumes by           Prior to   "        "
      construction of dust chambers

  Antimony reduced from ores by smelting (accidental)  Prior to   "        "

  Gold recovered by amalgamation                       Prior to   "        "

  Refining of copper by repeated fusion                Prior to   "        "

  Sulphide ores smelted for copper                     Prior to   "        "

  Vitriol (blue and green) made                        Prior to   "        "

  Alum made                                            Prior to   "        "

  Copper refined by oxidation and poling               Prior to 1200 A.D.

  Gold parted from copper by cupelling with lead       Prior to 1200 A.D.

  Gold parted from silver by fusion with sulphur       Prior to 1200 A.D.

  Manufacture of nitric acid and _aqua regia_          Prior to 1400 A.D.

  Gold parted from silver by nitric acid               Prior to 1400 A.D.

  Gold parted from silver with antimony sulphide       Prior to 1500 A.D.

  Gold parted from copper with sulphur                 Prior to 1500 A.D.

  Silver parted from iron with antimony sulphide       Prior to 1500 A.D.

  First text book on assaying                          Prior to 1500 A.D.

  Silver recovered from ores by amalgamation           Prior to 1500 A.D.

  Separation of silver from copper by liquation        Prior to 1540 A.D.

  Cobalt and manganese used for pigments               Prior to 1540 A.D.

  Roasting copper ores prior to smelting               Prior to 1550 A.D.

  Stamp-mill used                                      Prior to 1550 A.D.

  Bismuth reduced from ore                             Prior to 1550 A.D.

  Zinc reduced from ore (accidental)                   Prior to 1550 A.D.

Further, we believe it desirable to sketch at the outset the development
of metallurgical appliances as a whole, leaving the details to special
footnotes; otherwise a comprehensive view of the development of such
devices is difficult to grasp.

We can outline the character of metallurgical appliances at various
periods in a few words. It is possible to set up a description of the
imaginary beginning of the "bronze age" prior to recorded civilization,
starting with the savage who accidentally built a fire on top of some
easily reducible ore, and discovered metal in the ashes, etc.; but as
this method has been pursued times out of number to no particular
purpose, we will confine ourselves to a summary of such facts as we can
assemble. "Founders' hoards" of the bronze age are scattered over
Western Europe, and indicate that smelting was done in shallow pits with
charcoal. With the Egyptians we find occasional inscriptions showing
small furnaces with forced draught, in early cases with a blow-pipe, but
later--about 1500 B.C.--with bellows also. The crucible was apparently
used by the Egyptians in secondary melting, such remains at Mt. Sinai
probably dating before 2000 B.C. With the advent of the Prophets, and
the first Greek literature--9th to 7th century B.C.--we find frequent
references to bellows. The remains of smelting appliances at Mt. Laurion
(500-300 B.C.) do not indicate much advance over the primitive hearth;
however, at this locality we do find evidence of the ability to separate
minerals by specific gravity, by washing crushed ore over inclined
surfaces with a sort of buddle attachment. Stone grinding-mills were
used to crush ore from the earliest times of Mt. Laurion down to the
Middle Ages. About the beginning of the Christian era the writings of
Diodorus, Strabo, Dioscorides, and Pliny indicate considerable advance
in appliances. Strabo describes high stacks to carry off lead fumes;
Dioscorides explains a furnace with a dust-chamber to catch _pompholyx_
(zinc oxide); Pliny refers to the upper and lower crucibles (a
forehearth) and to the pillars and arches of the furnaces. From all of
their descriptions we may conclude that the furnaces had then reached
some size, and were, of course, equipped with bellows. At this time
sulphide copper and lead ores were smelted; but as to fluxes, except
lead for silver, and lead and soda for gold, we have practically no
mention. Charcoal was the universal fuel for smelting down to the 18th
century. Both Dioscorides and Pliny describe a distillation apparatus
used to recover quicksilver. A formidable list of mineral products and
metal alloys in use, indicate in themselves considerable apparatus, of
the details of which we have no indication; in the main these products
were lead sulphide, sulphate, and oxide (red-lead and litharge); zinc
oxide; iron sulphide, oxide and sulphate; arsenic and antimony
sulphides; mercury sulphide, sulphur, bitumen, soda, alum and potash;
and of the alloys, bronze, brass, pewter, electrum and steel.

From this period to the period of the awakening of learning our only
light is an occasional gleam from Theophilus and the Alchemists. The
former gave a more detailed description of metallurgical appliances than
had been done before, but there is little vital change apparent from the
apparatus of Roman times. The Alchemists gave a great stimulus to
industrial chemistry in the discovery of the mineral acids, and
described distillation apparatus of approximately modern form.

The next period--the Renaissance--is one in which our descriptions are
for the first time satisfactory, and a discussion would be but a review
of _De Re Metallica_.

[2] See footnote 2, p. 267, on verbs used for roasting.

[3] Agricola has here either forgotten to take into account his
three-palm-thick furnace walls, which will make the length of this long
wall sixty-one feet, or else he has included this foot and a half in
each case in the six-foot distance between the furnaces, so that the
actual clear space is only four and a half feet between the furnace with
four feet on the ends.

[4] The paucity of terms in Latin for describing structural members, and
the consequent repetition of "beam" (_trabs_), "timber" (_tignum_),
"billet" (_tigillum_), "pole" (_asser_), with such modifications as
small, large, and transverse, and with long explanatory clauses showing
their location, renders the original very difficult to follow. We have,
therefore, introduced such terms as "posts," "tie-beams," "sweeps,"
"levers," "rafters," "sills," "moulding," "braces," "cleats,"
"supports," etc., as the context demands.

[5] This set of rafters appears to start from the longitudinal beam.

[6] Devices for creating an air current must be of very old invention,
for it is impossible to conceive of anything but the crudest melting of
a few simple ores without some forced draft. Wilkinson (The Ancient
Egyptians, II, p. 316) gives a copy of an illustration of a foot-bellows
from a tomb of the time of Thotmes III. (1500 B.C.). The rest of the
world therefore, probably obtained them from the Egyptians. They are
mentioned frequently in the Bible, the most pointed reference to
metallurgical purposes being Jeremiah (VI, 29): "The bellows are burned,
the lead is consumed in the fire; the founder melteth in vain; for the
wicked are not plucked away." Strabo (VII, 3) states that Ephorus
ascribed the invention of bellows to Anacharsis--a Thracian prince of
about 600 B.C.

[7] This whole arrangement could be summarized by the word "hinge."

[8] The rim of this wheel is obviously made of segments fixed in two
layers; the "disc" meaning the aggregate of segments on either side of
the wheel.

[9] It has not been considered necessary to introduce the modern term
_twyer_ in these descriptions, as the literal rendering is sufficiently
clear.

[10] _Ferruminata_. These accretions are practically always near the
hearth, and would correspond to English "sows," and therefore that term
has been adopted. It will be noted that, like most modern metallurgists,
Agricola offers no method for treating them. Pliny (XXXIV, 37) describes
a "sow," and uses the verb _ferruminare_ (to weld or solder): "Some say
that in the furnace there are certain masses of stone which become
soldered together, and that the copper fuses around it, the mass not
becoming liquid unless it is transferred to another furnace; it thus
forms a sort of knot, as it were, of the metal."

[11] What are known in English as "crucible," "furnace well,"
"forehearth," "dipping-pot," "tapping-pot," "receiving-pot," etc., are
in the text all _catinus_, _i.e._, crucible. For easier reading,
however, we have assigned the names indicated in the context.

[12] _Panes ex pyrite conflati_. While the term _matte_ would cover most
cases where this expression appears, and in many cases would be more
expressive to the modern reader, yet there are instances where the
expression as it stands indicates its particular origin, and it has
been, therefore, considered advisable to adhere to the literal
rendering.

[13] _Molybdaena_. See note 37, p. 476. It was the saturated furnace
bottoms from cupellation.

[14] The four elements were earth, air, fire, and water.

[15] "Stones which easily melt in the fire." Nowhere in _De Re
Metallica_ does the author explain these substances. However in the
_Interpretatio_ (p. 465) he gives three genera or orders with their
German equivalents, as follows:--"_Lapides qui igni liquescunt primi
generis,--Schoene fluesse; secundi,--fluesse zum schmeltzen flock quertze;
tertii,--quertze oder kiselstein."_ We confess our inability to make
certain of most of the substances comprised in the first and second
orders. We consider they were in part fluor-spar, and in any event the
third order embraced varieties of quartz, flint, and silicious material
generally. As the matter is of importance from a metallurgical point of
view, we reproduce at some length Agricola's own statements on the
subject from _Bermannus_ and _De Natura Fossilium_. In the latter (p.
268) he states: "Finally there now remain those stones which I call
'stones which easily melt in the fire,' because when thrown into hot
furnaces they flow (_fluunt_). There are three orders (_genera_) of
these. The first resembles the transparent gems; the second is not
similar, and is generally not translucent; it is translucent in some
part, and in rare instances altogether translucent. The first is
sparingly found in silver and other mines; the second abounds in veins
of its own. The third genus is the material from which glass is made,
although it can also be made out of the other two. The stones of the
first order are not only transparent, but are also resplendent, and have
the colours of gems, for some resemble crystal, others emerald,
heliotrope, lapis lazuli, amethyst, sapphire, ruby, _chrysolithus_,
_morion_ (cairngorm?), and other gems, but they differ from them in
hardness.... To the first genus belongs the _lapis alabandicus_ (modern
albandite?), if indeed it was different from the alabandic carbuncle. It
can be melted, according to Pliny, in the fire, and fused for the
preparation of glass. It is black, but verging upon purple. It comes
from Caria, near Alabanda, and from Miletus in the same province. The
second order of stones does not show a great variety of colours, and
seldom beautiful ones, for it is generally white, whitish, greyish, or
yellowish. Because these (stones) very readily melt in the fire, they
are added to the ores from which the metals are smelted. The small
stones found in veins, veinlets, and the spaces between the veins, of
the highest peaks of the Sudetic range (_Suditorum montium_), belong
partly to this genus and partly to the first. They differ in size, being
large and small; and in shape, some being round or angular or pointed;
in colour they are black or ash-grey, or yellow, or purple, or violet,
or iron colour. All of these are lacking in metals. Neither do the
little stones contain any metals which are usually found in the streams
where gold dust is collected by washing.... In the rivers where are
collected the small stones from which tin is smelted, there are three
genera of small stones to be found, all somewhat rounded and of very
light weight, and devoid of all metals. The largest are black, both on
the outside and inside, smooth and brilliant like a mirror; the
medium-sized are either bluish black or ash-grey; the smallest are of a
yellowish colour, somewhat like a silkworm. But because both the former
and the latter stones are devoid of metals, and fly to pieces under the
blows of the hammer, we classify them as sand or gravel. Glass is made
from the stones of the third order, and particularly from sand. For when
this is thrown into the heated furnace it is melted by the fire.... This
kind of stone is either found in its own veins, which are occasionally
very wide, or else scattered through the mines. It is less hard than
flint, on account of which no fire can be struck from it. It is not
transparent, but it is of many colours--that is to say, white,
yellowish, ash-grey, brown, black, green, blue, reddish or red. This
genus of stones occurs here and there in mountainous regions, on banks
of rivers, and in the fields. Those which are black right through to the
interior, and not merely on the surface, are more rare; and very
frequently one coloured vein is intersected by another of a different
colour--for instance, a white one by a red one; the green is often
spotted with white, the ash-grey with black, the white with crimson.
Fragments of these stones are frequently found on the surface of the
earth, and in the running water they become polished by rubbing against
stones of their own or of another genus. In this way, likewise,
fragments of rocks are not infrequently shaped into spherical forms....
This stone is put to many uses; the streets are paved with it, whatever
its colour; the blue variety is added to the ash of pines for making
those other ashes which are used by wool-dyers. The white variety is
burned, ground, and sifted, and from this they make the sand out of
which glass is made. The whiter the sand is, the more useful it is."

Perusal of the following from _Bermannus_ (p. 458) can leave little
doubt as to the first or second order being in part fluor-spar. Agricola
derived the name _fluores_ from _fluo_ "to flow," and we in turn obtain
"fluorite," or "fluorspar," from Agricola. "_Bermannus_.--These stones
are similar to gems, but less hard. Allow me to explain word for word.
Our miners call them _fluores_, not inappropriately to my mind, for by
the heat of fire, like ice in the sun, they liquefy and flow away. They
are of varied and bright colours. _Naevius_.--Theophrastus says of them
that they are made by a conflux in the earth. These red _fluores_, to
employ the words just used by you, are the ruby silver which you showed
us before. _Bermannus_.--At the first glance it appears so, although it
is not infrequently translucent. _Naevius_.--Then they are rubies?
_Bermannus_.--Not that either. _Naevius_.--In what way, then, can they
be distinguished from rubies? _Bermannus_.--Chiefly by this sign, that
they glitter more feebly when translucent. Those which are not
translucent may be distinguished from rubies. Moreover, _fluores_ of all
kinds melt when they are subject to the first fire; rubies do not melt
in fire. _Naevius_.--You distinguish well. _Bermannus_.--You see the
other kind, of a paler purple colour? _Naevius_.--They appear to be an
inferior kind of amethyst, such as are found in many places in Bohemia.
_Bermannus_.--Indeed, they are not very dissimilar, therefore the common
people who do not know amethysts well, set them in rings for gems, and
they are easily sold. The third kind, as you see here, is white.
_Naevius_.--I should have thought it a crystal. _Bermannus_.--A fourth
is a yellow colour, a fifth ash colour, a sixth blackish. Some are
violet, some green, others gold-coloured. _Anton_.--What is the use of
_fluores_? _Bermannus_.--They are wont to be made use of when metals are
smelted, as they cause the material in the fire to be much more fluid,
exactly like a kind of stone which we said is made from pyrites (matte);
it is, indeed, made not far from here, at Breitenbrunn, which is near
Schwarzenberg. Moreover, from _fluores_ they can make colours which
artists use."

[16] _Stannum_. (_Interpretatio_,--_werck_, modern _werk_). This term
has been rendered throughout as "silver-lead" or "silver-lead alloy." It
was the argentiferous lead suitable for cupellation. Agricola, in using
it in this sense, was no doubt following his interpretation of its use
by Pliny. Further remarks upon this subject will be found in note 33, p.
473.

[17] _Expirare_,--to exhale or blow out.

[18] _Rhetos_. The ancient Rhaetia comprised not only the greater part
of Tyrol, but also parts of Switzerland and Lombardy. The mining section
was, however, in Tyrol.

[19] _Noricum_ was a region south of the Danube, embracing not only
modern Styria, but also parts of Austria, Salzberg, and Carinthia.

[20] One _drachma_ of gold to a _centumpondium_ would be (if we assume
these were Roman weights) 3 ozs. 1 dwt. Troy per short ton. One-half
_uncia_ of silver would be 12 ozs. 3 dwts. per short ton.

[21] For discussion of these fluxes see note page 232.

[22] _Carni_. Probably the people of modern Austrian Carniola, which
lies south of Styria and west of Croatia.

[23] HISTORICAL NOTE ON SMELTING LEAD AND SILVER.--The history of lead
and silver smelting is by no means a sequent array of exact facts. With
one possible exception, lead does not appear upon the historical horizon
until long after silver, and yet their metallurgy is so inextricably
mixed that neither can be considered wholly by itself. As silver does
not occur native in any such quantities as would have supplied the
amounts possessed by the Ancients, we must, therefore, assume its
reduction by either (1) intricate chemical processes, (2) amalgamation,
(3) reduction with copper, (4) reduction with lead. It is impossible to
conceive of the first with the ancient knowledge of chemistry; the
second (see note 12, p. 297) does not appear to have been known until
after Roman times; in any event, quicksilver appears only at about 400
B.C. The third was impossible, as the parting of silver from copper
without lead involves metallurgy only possible during the last century.
Therefore, one is driven to the conclusion that the fourth case
obtained, and that the lead must have been known practically
contemporaneously with silver. There is a leaden figure exhibited in the
British Museum among the articles recovered from the Temple of Osiris at
Abydos, and considered to be of the Archaic period--prior to 3800 B.C.
The earliest known Egyptian silver appears to be a necklace of beads,
supposed to be of the XII. Dynasty (2400 B.C.), which is described in
the 17th Memoir, Egyptian Exploration Fund (London, 1898, p. 22). With
this exception of the above-mentioned lead specimen, silver articles
antedate positive evidence of lead by nearly a millennium, and if we
assume lead as a necessary factor in silver production, we must conclude
it was known long prior to any direct (except the above solitary
possibility) evidence of lead itself. Further, if we are to conclude its
necessary association with silver, we must assume a knowledge of
cupellation for the parting of the two metals. Lead is mentioned in 1500
B.C. among the spoil captured by Thotmes III. Leaden objects have
frequently been found in Egyptian tombs as early as Rameses III. (1200
B.C.). The statement is made by Pulsifer (Notes for a History of Lead,
New York 1888, p. 146) that Egyptian pottery was glazed with lead. We
have been unable to find any confirmation of this. It may be noted,
incidentally, that lead is not included in the metals of the "Tribute of
Yue" in the Shoo King (The Chinese Classics, 2500 B.C.?), although silver
is so included.

After 1200 or 1300 B.C. evidences of the use of lead become frequent.
Moses (Numbers XXXI, 22-23) directs the Israelites with regard to their
plunder from the Midianites (1300 B.C.): "Only the gold and the silver,
the brass [_sic_], the iron, the tin, and the lead. Everything that may
abide the fire, ye shall make it go through the fire, and it shall be
clean; nevertheless, it shall be purified with the water of separation,
and all that abideth not the fire ye shall make go through the water."
Numerous other references occur in the Scriptures (Psalms XII, 6;
Proverbs XVII, 3; XXV, 4; etc.), one of the most pointed from a
metallurgical point of view being that of Jeremiah (600 B.C.), who says
(VI, 29-30): "The bellows are burned, the lead is consumed of the fire;
the founder melteth in vain; for the wicked are not plucked away.
Reprobate silver shall men call them because the Lord hath rejected
them." From the number of his metaphors in metallurgical terms we may
well conclude that Jeremiah was of considerable metallurgical
experience, which may account for his critical tenor of mind. These
Biblical references all point to a knowledge of separating silver and
lead. Homer mentions lead (Iliad XXIV, 109), and it has been found in
the remains of ancient Troy and Mycenae (H. Schliemann, "Troy and its
Remains," London, 1875, and "Mycenae," New York, 1877). Both Herodotus
(I, 186) and Diodorus (II, 1) speak of the lead used to fix iron clamps
in the stone bridge of Nitocris (600 B.C.) at Babylon.

Our best evidence of ancient lead-silver metallurgy is the result of the
studies at Mt. Laurion by Edouard Ardaillon (_Mines du Laurion dans
l'Antiquite_, Paris, 1897). Here the very extensive old workings and the
slag heaps testify to the greatest activity. The re-opening of the mines
in recent years by a French Company has well demonstrated their
technical character, and the frequent mention in Greek History easily
determines their date. These deposits of argentiferous galena were
extensively worked before 500 B.C. and while the evidence of
concentration methods is ample, there is but little remaining of the
ancient smelters. Enough, however, remains to demonstrate that the
galena was smelted in small furnaces at low heat, with forced draught,
and that it was subsequently cupelled. In order to reduce the sulphides
the ancient smelters apparently depended upon partial roasting in the
furnace at a preliminary period in reduction, or else upon the
ferruginous character of the ore, or upon both. See notes p. 27 and p.
265. Theognis (6th century B.C.) and Hippocrates (5th century B.C.) are
frequently referred to as mentioning the refining of gold with lead; an
inspection of the passages fails to corroborate the importance which has
been laid upon them. Among literary evidences upon lead metallurgy of
later date, Theophrastus (300 B.C.) describes the making of white-lead
with lead plates and vinegar. Diodorus Siculus (1st century B.C.), in
his well-known quotation from Agatharchides (2nd century B.C.) with
regard to gold mining and treatment in Egypt, describes the refining of
gold with lead. (See note 8, p. 279.) Strabo (63 B.C.-24 A.D.) says
(III, 2, 8): "The furnaces for silver are constructed lofty in order
that the vapour, which is dense and pestilent, may be raised and carried
off." And again (III, 2, 10), in quoting from Polybius (204-125 B.C.):
"Polybius, speaking of the silver mines of New Carthage, tells us that
they are extremely large, distant from the city about 20 stadia, and
occupy a circuit of 400 stadia; that there are 40,000 men regularly
engaged in them, and that they yield daily to the Roman people (a
revenue of) 25,000 drachmae. The rest of the process I pass over, as it
is too long; but as for the silver ore collected, he tells us that it is
broken up and sifted through sieves over water; that what remains is to
be again broken, and the water having been strained off it is to be
sifted and broken a third time. The dregs which remain after the fifth
time are to be melted, and the lead being poured off, the silver is
obtained pure. These silver mines still exist; however, they are no
longer the property of the State, neither these nor those elsewhere, but
are possessed by private individuals. The gold mines, on the contrary,
nearly all belong to the State. Both at Castlon and other places there
are singular lead mines worked. They contain a small proportion of
silver, but not sufficient to pay for the expense of refining"
(Hamilton's Trans.). Dioscorides (1st century A.D.), among his
medicines, describes several varieties of litharge, their origin, and
the manner of making white-lead (see on pp. 465, 440), but he gives no
very tangible information on lead smelting. Pliny, at the same period in
speaking of silver, (XXXIII, 31), says: "After this we speak of silver,
the next folly. Silver is only found in shafts, there being no
indications like shining particles as in the case of gold. This earth is
sometimes red, sometimes of an ashy colour. It is impossible to melt it
except with lead ore (_vena plumbi_), called _galena_, which is
generally found next to silver veins. And this the same agency of fire
separates part into lead, which floats on the silver like oil on water."
(We have transferred lead and silver in this last sentence, otherwise it
means nothing.) Also (XXXIV, 47) he says: "There are two different
sources of lead, it being smelted from its own ore, whence it comes
without the admixture of any other substance, or else from an ore which
contains it in common with silver. The metal, which flows liquid at the
first melting in the furnace, is called _stannum_ that at the second
melting is silver; that which remains in the furnace is _galena_, which
is added to a third part of the ore. This being again melted, produces
lead with a deduction of two-ninths." We have, despite some grammatical
objections, rendered this passage quite differently from other
translators, none of whom have apparently had any knowledge of
metallurgy; and we will not, therefore, take the several pages of space
necessary to refute their extraordinary and unnecessary hypotheses. From
a metallurgical point of view, two facts must be kept in mind,--first,
that _galena_ in this instance was the same substance as _molybdaena_,
and they were both either a variety of litharge or of lead carbonates;
second, that the _stannum_ of the Ancients was silver-lead alloy.
Therefore, the metallurgy of this paragraph becomes a simple melting of
an argentiferous lead ore, its subsequent cupellation, with a return of
the litharge to the furnace. Pliny goes into considerable detail as to
varieties of litharge, for further notes upon which see p. 466. The
Romans were most active lead-silver miners, not only in Spain, but also
in Britain. There are scores of lead pigs of the Roman era in various
English museums, many marked "_ex argent_." Bruce (The Roman Wall,
London, 1852, p. 432) describes some Roman lead furnaces in Cumberland
where the draught was secured by driving a tapering tunnel into the
hills. The Roman lead slag ran high in metal, and formed a basis for
quite an industry in England in the early 18th century (Hunt, British
Mining, London, 1887, p. 26, etc.). There is nothing in mediaeval
literature which carries us further with lead metallurgy than the
knowledge displayed by Pliny, until we arrive at Agricola's period. The
history of cupellation is specially dealt with in note on p. 465.

[25] _Cadmia_. In the German Translation this is given as _kobelt_. It
would be of uncertain character, but no doubt partially furnace
calamine. (See note on p. 112.)

[26] _Pompholyx_. (_Interpretatio_ gives the German as _Weisser huetten
rauch als ober dem garherde und ober dem kupfer ofen_). This was the
impure protoxide of zinc deposited in the furnace outlets, and is modern
"tutty." The ancient products, no doubt, contained arsenical oxides as
well. It was well known to the Ancients, and used extensively for
medicinal purposes, they dividing it into two species--_pompholyx_ and
_spodos_. The first adequate description is by Dioscorides (V, 46):
"_Pompholyx_ differs from _spodos_ in species, not in genus. For
_spodos_ is blacker, and is often heavier, full of straws and hairs,
like the refuse that is swept from the floors of copper smelters. But
_pompholyx_ is fatty, unctuous, white and light enough to fly in the
air. Of this there are two kinds--the one inclines to sky blue and is
unctuous; the other is exceedingly white, and is extremely light. White
_pompholyx_ is made every time that the artificer, in the preparation
and perfecting of copper (brass?) sprinkles powdered _cadmia_ upon it to
make it more perfect, for the soot which rises being very fine becomes
_pompholyx_. Other _pompholyx_ is made, not only in working copper
(brass?), but is also made from _cadmia_ by continually blowing with
bellows. The manner of doing it is as follows:--The furnace is
constructed in a two-storied building, and there is a medium-sized
aperture opening to the upper chamber; the building wall nearest the
furnace is pierced with a small opening to admit the nozzle of the
bellows. The building must have a fair-sized door for the artificer to
pass in and out. Another small building must adjoin this, in which are
the bellows and the man who works them. Then the charcoal in the furnace
is lighted, and the artificer continually throws broken bits of _cadmia_
from the place above the furnace, whilst his assistant, who is below,
throws in charcoals, until all of the _cadmia_ inside is consumed. By
this means the finest and lightest part of the stuff flies up with the
smoke to the upper chamber, and adheres to the walls of the roof. The
substance which is thus formed has at first the appearance of bubbles on
water, afterward increasing in size, it looks like skeins of wool. The
heaviest parts settle in the bottom, while some fall over and around the
furnaces, and some lie on the floor of the building. This latter part is
considered inferior, as it contains a lot of earth and becomes full of
dirt."

Pliny (XXXIV, 33) appears somewhat confused as to the difference between
the two species: "That which is called _pompholyx_ and _spodos_ is found
in the copper-smelting furnaces, the difference between them being that
_pompholyx_ is separated by washing, while _spodos_ is not washed. Some
have called that which is white and very light _pompholyx_, and it is
the soot of copper and _cadmia_; whereas _spodos_ is darker and heavier.
It is scraped from the walls of the furnace, and is mixed with particles
of metal, and sometimes with charcoal." (XXXIV, 34.) "The Cyprian
_spodos_ is the best. It is formed by fusing _cadmia_ with copper ore.
This being the lightest part of the metal, it flies up in the fumes from
the furnace, and adheres to the roof, being distinguished from the soot
by its whiteness. That which is less white is immature from the furnace,
and it is this which some call '_pompholyx_.'" Agricola (_De Natura
Fossilium_, p. 350) traverses much the same ground as the authors
previously quoted, and especially recommends the _pompholyx_ produced
when making brass by melting alternate layers of copper and calamine
(_cadmia fossilis_).

[27] _Oleo, ex fece vini sicca confecto_. This oil, made from argol, is
probably the same substance mentioned a few lines further on as "wine,"
distilled by heating argol in a retort. Still further on, salt made from
argol is mentioned. It must be borne in mind that this argol was crude
tartrates from wine vats, and probably contained a good deal of organic
matter. Heating argol sufficiently would form potash, but that the
distillation product could be anything effective it is difficult to see.

[28] _Aqua valens_. No doubt mainly nitric acid, the preparation of
which is explained at length in Book X, p. 439.

[29] _Quod cum ignis consumit non modo una cum eo, quae ipsius stibii
vis est, aliqua auri particula, sed etiam argenti, si cum auro fuerit
permistum, consumitur._ The meaning is by no means clear. On p. 451 is
set out the old method of parting silver from gold with antimony
sulphide, of which this may be a variation. The silver combines with
sulphur, and the reduced antimony forms an alloy with the gold. The
added iron and copper would also combine with the sulphur from the
antimony sulphide, and no doubt assist by increasing the amount of free
collecting agent and by increasing the volume of the matte. (See note
17, p. 451.)

[30] There follow eight different methods of treating crude bullion or
rich concentrates. In a general way three methods are involved,--1st,
reduction with lead or antimony, and cupellation; 2nd, reduction with
silver, and separation with nitric acid; 3rd, reduction with lead and
silver, followed by cupellation and parting with nitric acid. The use of
sulphur or antimony sulphide would tend to part out a certain amount of
silver, and thus obtain fairly pure bullion upon cupellation. But the
introduction of copper could only result deleteriously, except that it
is usually accompanied by sulphur in some form, and would thus probably
pass off harmlessly as a matte carrying silver. (See note 33 below.)

[31] It is not very clear where this lead comes from. Should it be
antimony? The German translation gives this as "silver."

[32] These powders are described in Book VII., p. 236. It is difficult
to say which the second really is. There are numbers of such recipes in
the _Probierbuechlein_ (see Appendix B), with which a portion of these
are identical.

[33] A variety of methods are involved in this paragraph: 1st, crude
gold ore is smelted direct; 2nd, gold concentrates are smelted in a lead
bath with some addition of iron--which would simply matte off--the lead
bullion being cupelled; 3rd, roasted and unroasted pyrites and _cadmia_
(probably blende, cobalt, arsenic, etc.) are melted into a matte; this
matte is repeatedly roasted, and then re-melted in a lead bath; 4th, if
the material "flies out of the furnace" it is briquetted with iron ore
and lime, and the briquettes smelted with copper matte. Three products
result: (_a_) slag; (_b_) matte; (_c_) copper-gold-silver alloy. The
matte is roasted, re-smelted with lead, and no doubt a button obtained,
and further matte. The process from this point is not clear. It appears
that the copper bullion is melted with lead, and normally this product
would be taken to the liquation furnace, but from the text it would
appear that the lead-copper bullion was melted again with iron ore and
pyrites, in which case some of the copper would be turned into the
matte, and the lead alloy would be richer in gold and silver.

HISTORICAL NOTE ON GOLD.--There is ample evidence of gold being used for
ornamental purposes prior to any human record. The occurrence of large
quantities of gold in native form, and the possibility of working it
cold, did not necessitate any particular metallurgical ingenuity. The
earliest indications of metallurgical work are, of course, among the
Egyptians, the method of washing being figured as early as the monuments
of the IV Dynasty (prior to 3800 B.C.). There are in the British Museum
two stelae of the XII Dynasty (2400 B.C.) (144 Bay 1 and 145 Bay 6)
relating to officers who had to do with gold mining in Nubia, and upon
one there are references to working what appears to be ore. If this be
true, it is the earliest reference to this subject. The Papyrus map
(1500 B.C.) of a gold mine, in the Turin Museum (see note 16, p. 129),
probably refers to a quartz mine. Of literary evidences there is
frequent mention of refining gold and passing it through the fire in the
Books of Moses, arts no doubt learned from the Egyptians. As to working
gold, ore as distinguished from alluvial, we have nothing very tangible,
unless it be the stelae above, until the description of Egyptian gold
mining by Agatharchides (see note 8, p. 279). This geographer, of about
the 2nd century B.C., describes very clearly indeed the mining,
crushing, and concentration of ore and the refining of the concentrates
in crucibles with lead, salt, and barley bran. We may mention in passing
that Theognis (6th Century B.C.) is often quoted as mentioning the
refining of gold with lead, but we do not believe that the passage in
question (1101): "But having been put to the test and being rubbed
beside (or against) lead as being refined gold, you will be fair," etc.;
or much the same statement again (418) will stand much metallurgical
interpretation. In any event, the myriads of metaphorical references to
fining and purity of gold in the earliest shreds of literature do not
carry us much further than do those of Shakespeare or Milton. Vitruvius
and Pliny mention the recovery or refining of gold with mercury (see
note 12, p. 297 on Amalgamation); and it appears to us that gold was
parted from silver by cementation with salt prior to the Christian era.
We first find mention of parting with sulphur in the 12th century, with
nitric acid prior to the 14th century, by antimony sulphide prior to the
15th century, and by cementation with nitre by Agricola. (See historical
note on parting gold and silver, p. 458.) The first mention of parting
gold from copper occurs in the early 16th century (see note 24, p. 462).
The first comprehensive description of gold metallurgy in all its
branches is in _De Re Metallica_.

[34] _Rudis_ silver comprised all fairly pure silver ores, such as
silver sulphides, chlorides, arsenides, etc. This is more fully
discussed in note 6, p. 108.

[35] _Evolent_,--volatilize?

[36] _Lapidis plumbarii facile liquescentis_. The German Translation
gives _glantz_, _i.e._, Galena, and the _Interpretatio_ also gives
_glantz_ for _lapis plumbarius_. We are, however, uncertain whether this
"easily melting" material is galena or some other lead ore.

[37] _Molybdaena_ is usually hearth-lead in _De Re Metallica_, but the
German translation in this instance uses _pleyertz_, lead ore. From the
context it would not appear to mean hearth-lead--saturated bottoms of
cupellation furnaces--for such material would not contain appreciable
silver. Agricola does confuse what are obviously lead carbonates with
his other _molybdaena_ (see note 37, p. 476).

[38] The term _cadmia_ is used in this paragraph without the usual
definition. Whether it was _cadmia fornacis_ (furnace accretions) or
_cadmia metallica_ (cobalt-arsenic-blende mixture) is uncertain. We
believe it to be the former.

[39] _Ramentum si lotura ex argento rudi_. This expression is generally
used by the author to indicate concentrates, but it is possible that in
this sentence it means the tailings after washing rich silver minerals,
because the treatment of the _rudis_ silver has been already discussed
above.

[40] _Ustum_. This might be rendered "burnt." In any event, it seems
that the material is sintered.

[41] _Aes purum sive proprius ei color insederit, sive chrysocolla vel
caeruleo fuerit tinctum, et rude plumbei coloris, aut fusci, aut nigri._
There are six copper minerals mentioned in this sentence, and from our
study of Agricola's _De Natura Fossilium_ we hazard the
following:--_Proprius ei color insederit_,--"its own colour,"--probably
cuprite or "ruby copper." _Tinctum chrysocolla_--partly the modern
mineral of that name and partly malachite. _Tinctum caeruleo_, partly
azurite and partly other blue copper minerals. _Rude plumbei
coloris_,--"lead coloured,"--was certainly chalcocite (copper glance).
We are uncertain of _fusci aut nigri_, but they were probably alteration
products. For further discussion see note on p. 109.

[42] HISTORICAL NOTE ON COPPER SMELTING.--The discoverer of the
reduction of copper by fusion, and his method, like the discoverer of
tin and iron, will never be known, because he lived long before humanity
began to make records of its discoveries and doings. Moreover, as
different races passed independently and at different times through the
so-called "Bronze Age," there may have been several independent
discoverers. Upon the metallurgy of pre-historic man we have some
evidence in the many "founders' hoards" or "smelters' hoards" of the
Bronze Age which have been found, and they indicate a simple shallow pit
in the ground into which the ore was placed, underlaid with charcoal.
Rude round copper cakes eight to ten inches in diameter resulted from
the cooling of the metal in the bottom of the pit. Analyses of such
Bronze Age copper by Professor Gowland and others show a small
percentage of sulphur, and this is possible only by smelting oxidized
ores. Copper objects appear in the pre-historic remains in Egypt, are
common throughout the first three dynasties, and bronze articles have
been found as early as the IV Dynasty (from 3800 to 4700 B.C., according
to the authority adopted). The question of the origin of this bronze,
whether from ores containing copper and tin or by alloying the two
metals, is one of wide difference of opinion, and we further discuss the
question in note 53, p. 411, under Tin. It is also interesting to note
that the crucible is the emblem of copper in the hieroglyphics. The
earliest source of Egyptian copper was probably the Sinai Peninsula,
where there are reliefs as early as Seneferu (about 3700 B.C.),
indicating that he worked the copper mines. Various other evidences
exist of active copper mining prior to 2500 B.C. (Petrie, Researches in
Sinai, London, 1906, p. 51, etc.). The finding of crucibles here would
indicate some form of refining. Our knowledge of Egyptian copper
metallurgy is limited to deductions from their products, to a few
pictures of crude furnaces and bellows, and to the minor remains on the
Sinai Peninsula; none of the pictures were, so far as we are aware,
prior to 2300 B.C., but they indicate a considerable advance over the
crude hearth, for they depict small furnaces with forced draught--first
a blow-pipe, and in the XVIII Dynasty (about 1500 B.C.) the bellows
appear. Many copper articles have been found scattered over the Eastern
Mediterranean and Asia Minor of pre-Mycenaean Age, some probably as
early as 3000 B.C. This metal is mentioned in the "Tribute of Yue" in the
Shoo King (2500 B.C.?); but even less is known of early Chinese
metallurgy than of the Egyptian. The remains of Mycenaean, Phoenician,
Babylonian, and Assyrian civilizations, stretching over the period from
1800 to 500 B.C., have yielded endless copper and bronze objects, the
former of considerable purity, and the latter a fairly constant
proportion of from 10% to 14% tin. The copper supply of the pre-Roman
world seems to have come largely, first from Sinai, and later from
Cyprus, and from the latter comes our word copper, by way of the Romans
shortening _aes cyprium_ (Cyprian copper) to _cuprum_. Research in this
island shows that it produced copper from 3000 B.C., and largely because
of its copper it passed successively under the domination of the
Egyptians, Assyrians, Phoenicians, Greeks, Persians, and Romans. The
bronze objects found in Cyprus show 2% to 10% of tin, although tin does
not, so far as modern research goes, occur on that island. There can be
no doubt that the Greeks obtained their metallurgy from the Egyptians,
either direct or second-hand--possibly through Mycenae or Phoenicia.
Their metallurgical gods and the tradition of Cadmus indicate this much.

By way of literary evidences, the following lines from Homer (Iliad,
XVIII.) have interest as being the first preserved description in any
language of a metallurgical work. Hephaestus was much interrupted by
Thetis, who came to secure a shield for Achilles, and whose general
conversation we therefore largely omit. We adopt Pope's translation:--

    There the lame architect the goddess found
    Obscure in smoke, his forges flaming round,
    While bathed in sweat from fire to fire he flew;
    And puffing loud the roaring bellows blew.
    * * *
    In moulds prepared, the glowing ore (metal?) he pours.
    * * *
    "Vouchsafe, oh Thetis! at our board to share
    The genial rites and hospitable fare;
    While I the labours of the forge forego,
    And bid the roaring bellows cease to blow."
    Then from his anvil the lame artist rose;
    Wide with distorted legs oblique he goes,
    And stills the bellows, and (in order laid)
    Locks in their chests his instruments of trade;
    Then with a sponge, the sooty workman dress'd
    His brawny arms embrown'd and hairy breast.
    * * *
    Thus having said, the father of the fires
    To the black labours of his forge retires.
    Soon as he bade them blow the bellows turn'd
    Their iron mouths; and where the furnace burn'd
    Resounding breathed: at once the blast expires,
    And twenty forges catch at once the fires;
    Just as the God directs, now loud, now low,
    They raise a tempest, or they gently blow;
    In hissing flames huge silver bars are roll'd,
    And stubborn brass (copper?) and tin, and solid gold;
    Before, deep fixed, the eternal anvils stand.
    The ponderous hammer loads his better hand;
    His left with tongs turns the vex'd metal round.
    And thick, strong strokes, the doubling vaults rebound
    Then first he formed the immense and solid shield;

Even if we place the siege of Troy at any of the various dates from 1350
to 1100 B.C., it does not follow that the epic received its final form
for many centuries later, probably 900-800 B.C.; and the experience of
the race in metallurgy at a much later period than Troy may have been
drawn upon to fill in details. It is possible to fill a volume with
indirect allusion to metallurgical facts and to the origins of the art,
from Greek mythology, from Greek poetry, from the works of the
grammarians, and from the Bible. But they are of no more technical value
than the metaphors from our own tongue. Greek literature in general is
singularly lacking in metallurgical description of technical value, and
it is not until Dioscorides (1st Century A.D.) that anything of much
importance can be adduced. Aristotle, however, does make an interesting
reference to what may be brass (see note on p. 410), and there can be no
doubt that if we had the lost work of Aristotle's successor,
Theophrastus (372-288 B.C.), on metals we should be in possession of the
first adequate work on metallurgy. As it is, we find the green and blue
copper minerals from Cyprus mentioned in his "Stones." And this is the
first mention of any particular copper ore. He also mentions (XIX.)
pyrites "which melt," but whether it was a copper variety cannot be
determined. Theophrastus further describes the making of verdigris (see
note 4, p. 440). From Dioscorides we get a good deal of light on copper
treatment, but as his objective was to describe medicinal preparations,
the information is very indirect. He states (V, 100) that "pyrites is a
stone from which copper is made." He mentions _chalcitis_ (copper
sulphide, see note on, p. 573); while his _misy_, _sory_, _melanteria_,
_caeruleum_, and _chrysocolla_ were all oxidation copper or iron
minerals. (See notes on p. 573.) In giving a method of securing
_pompholyx_ (zinc oxide), "the soot flies up when the copper refiners
sprinkle powdered _cadmia_ over the molten metal" (see note 26, p. 394);
he indirectly gives us the first definite indication of making brass,
and further gives some details as to the furnaces there employed, which
embraced bellows and dust chambers. In describing the making of flowers
of copper (see note 26, p. 538) he states that in refining copper, when
the "molten metal flows through its tube into a receptacle, the workmen
pour cold water on it, the copper spits and throws off the flowers." He
gives the first description of vitriol (see note 11, p. 572), and
describes the pieces as "shaped like dice which stick together in
bunches like grapes." Altogether, from Dioscorides we learn for the
first time of copper made from sulphide ores, and of the recovery of
zinc oxides from furnace fumes; and he gives us the first certain
description of making brass, and finally the first notice of blue
vitriol.

The next author we have who gives any technical detail of copper work is
Pliny (23-79 A.D.), and while his statements carry us a little further
than Dioscorides, they are not as complete as the same number of words
could have afforded had he ever had practical contact with the subject,
and one is driven to the conclusion that he was not himself much of a
metallurgist. Pliny indicates that copper ores were obtained from veins
by underground mining. He gives the same minerals as Dioscorides, but is
a good deal confused over _chrysocolla_ and _chalcitis_. He gives no
description of the shapes of furnaces, but frequently mentions the
bellows, and speaks of the _cadmia_ and _pompholyx_ which adhered to the
walls and arches of the furnaces. He has nothing to say as to whether
fluxes are used or not. As to fuel, he says (XXXIII, 30) that "for
smelting copper and iron pine wood is the best." The following (XXXIV,
20) is of the greatest interest on the subject:--"Cyprian copper is
known as _coronarium_ and _regulare_; both are ductile.... In other
mines are made that known as _regulare_ and _caldarium_. These differ,
because the _caldarium_ is only melted, and is brittle to the hammer;
whereas the _regulare_ is malleable or ductile. All Cyprian copper is
this latter kind. But in other mines with care the difference can be
eliminated from _caldarium_, the impurities being carefully purged away
by smelting with fire, it is made into _regulare_. Among the remaining
kinds of copper the best is that of Campania, which is most esteemed for
vessels and utensils. This kind is made in several ways. At Capua it is
melted with wood, not with charcoal, after which it is sprinkled with
water and washed through an oak sieve. After it is melted a number of
times Spanish _plumbum argentum_ (probably pewter) is added to it in
proportion of ten pounds of the lead to one hundred pounds of copper,
and thereby it is made pliable and assumes that pleasing colour which in
other kinds of copper is effected by oil and the sun. In many parts of
the Italian provinces they make a similar kind of metal; but there they
add eight pounds of lead, and it is re-melted over charcoal because of
the scarcity of wood. Very different is the method carried on in Gaul,
particularly where the ore is smelted between red hot stones, for this
burns the metal and renders it black and brittle. Moreover, it is
re-melted only a single time, whereas the oftener this operation is
repeated the better the quality becomes. It is well to remark that all
copper fuses best when the weather is intensely cold." The red hot
stones in Gaul were probably as much figments of imagination as was the
assumption of one commentator that they were a reverberatory furnace.
Apart from the above, Pliny says nothing very direct on refining copper.
It is obvious that more than one melting was practised, but that
anything was known of the nature of oxidation by a blast and reduction
by poling is uncertain. We produce the three following statements in
connection with some bye-products used for medicinal purposes, which at
least indicate operations subsequent to the original melting. As to
whether they represent this species of refining or not, we leave it to
the metallurgical profession (XXXIV, 24):--"The flowers of copper are
used in medicine; they are made by fusing copper and moving it to
another furnace, where the rapid blast separates it into a thousand
particles, which are called flowers. These scales are also made when the
copper cakes are cooled in water (XXXIV, 35). _Smega_ is prepared in the
copper works; when the metal is melted and thoroughly smelted charcoal
is added to it and gradually kindled; after this, being blown upon by a
powerful bellows, it spits out, as it were, copper chaff (XXXIV, 37).
There is another product of these works easily distinguished from
_smega_, which the Greeks call _diphrygum_. This substance has three
different origins.... A third way of making it is from the residues
which fall to the bottom in copper furnaces. The difference between the
different substances (in the furnace) is that the copper itself flows
into a receiver; the slag makes its escape from the furnace; the flowers
float on the top (of the copper?), and the _diphrygum_ remains behind.
Some say that in the furnace there are certain masses of stone which,
being smelted, become soldered together, and that the copper fuses
around it, the mass not becoming liquid unless it is transferred to
another furnace. It thus forms a sort of knot, as it were, in the
metal."

Pliny is a good deal confused over the copper alloys, failing to
recognise _aurichalcum_ as the same product as that made by mixing
_cadmia_ and molten copper. Further, there is always the difficulty in
translation arising from the fact that the Latin _aes_ was
indiscriminately copper, brass, and bronze. He does not, except in one
instance (XXXIV., 2), directly describe the mixture of _cadmia_ and
copper. "Next to Livian (copper) this kind (_corduban_, from Spain) most
readily absorbs _cadmia_, and becomes almost as excellent as
_aurichalcum_ for making _sesterces_." As to bronze, there is no very
definite statement; but the _argentatium_ given in the quotation above
from XXXIV, 20, is stated in XXXIV, 48, to be a mixture of tin and lead.
The Romans carried on most extensive copper mining in various parts of
their empire; these activities extended from Egypt through Cyprus,
Central Europe, the Spanish Peninsula, and Britain. The activity of such
works is abundantly evidenced in the mines, but very little remains upon
the surface to indicate the equipment; thus, while mining methods are
clear enough, the metallurgy receives little help from these sources. At
Rio Tinto there still remain enormous slag heaps from the Romans, and
the Phoenician miners before them. Professor W. A. Carlyle informs us
that the ore worked must have been almost exclusively sulphides, as only
negligible quantities of carbonates exist in the deposits; they probably
mixed basic and siliceous ores. There is some evidence of roasting, and
the slags run from .2 to .6%. They must have run down mattes, but as to
how they ultimately arrived at metallic copper there is no evidence to
show.

The special processes for separating other metals from copper by
liquation and matting, or of refining by poling, etc., are none of them
clearly indicated in records or remains until we reach the 12th century.
Here we find very adequate descriptions of copper smelting and refining
by the Monk Theophilus (see Appendix B). We reproduce two paragraphs of
interest from Hendrie's excellent translation (p. 305 and 313): "Copper
is engendered in the earth. When a vein of which is found, it is
acquired with the greatest labour by digging and breaking. It is a stone
of a green colour and most hard, and naturally mixed with lead. This
stone, dug up in abundance, is placed upon a pile and burned after the
manner of chalk, nor does it change colour, but yet loses its hardness,
so that it can be broken up. Then, being bruised small, it is placed in
the furnace; coals and the bellows being applied, it is incessantly
forged by day and night. This should be done carefully and with caution;
that is, at first coals are placed in, then small pieces of stone are
distributed over them, and again coals, and then stone anew, and it is
thus arranged until it is sufficient for the size of the furnace. And
when the stone has commenced to liquefy, the lead flows out through some
small cavities, and the copper remains within. (313) Of the purification
of copper. Take an iron dish of the size you wish, and line it inside
and out with clay strongly beaten and mixed, and it is carefully dried.
Then place it before a forge upon the coals, so that when the bellows
act upon it the wind may issue partly within and partly above it, and
not below it. And very small coals being placed round it, place copper
in it equally, and add over it a heap of coals. When, by blowing a long
time, this has become melted, uncover it and cast immediately fine ashes
of coals over it, and stir it with a thin and dry piece of wood as if
mixing it, and you will directly see the burnt lead adhere to these
ashes like a glue. Which being cast out again superpose coals, and
blowing for a long time, as at first, again uncover it, and then do as
you did before. You do this until at length, by cooking it, you can
withdraw the lead entirely. Then pour it over the mould which you have
prepared for this, and you will thus prove if it be pure. Hold it with
pincers, glowing as it is, before it has become cold, and strike it with
a large hammer strongly over the anvil, and if it be broken or split you
must liquefy it anew as before."

The next writer of importance was Biringuccio, who was contemporaneous
with Agricola, but whose book precedes _De Re Metallica_ by 15 years.
That author (III, 2) is the first to describe particularly the furnace
used in Saxony and the roasting prior to smelting, and the first to
mention fluxes in detail. He, however, describes nothing of matte
smelting; in copper refining he gives the whole process of poling, but
omits the pole. It is not until we reach _De Re Metallica_ that we find
adequate descriptions of the copper minerals, roasting, matte smelting,
liquation, and refining, with a wealth of detail which eliminates the
necessity for a large amount of conjecture regarding technical methods
of the time.

[43] _Cadmia metallica fossilis_ (see note on p. 112). This was
undoubtedly the complex cobalt-arsenic-zinc minerals found in Saxony. In
the German translation, however, this is given as _Kalmey_, calamine,
which is unlikely from the association with pyrites.

[44] The Roman _modius_ (_modulus_?) held about 550 cubic inches, the
English peck holding 535 cubic inches. Then, perhaps, his seven _moduli_
would be roughly, 1 bushel 3 pecks, and 18 vessels full would be about
31 bushels--say, roughly, 5,400 lbs. of ore.

[45] Exhausted liquation cakes (_panes aerei fathiscentes_). This is the
copper sponge resulting from the first liquation of lead, and still
contains a considerable amount of lead. The liquation process is
discussed in great detail in Book XI.

[46] The method of this paragraph involves two main objectives--first,
the gradual enrichment of matte to blister copper; and, second, the
creation of large cakes of copper-lead-silver alloy of suitable size and
ratio of metals for liquation. This latter process is described in
detail in Book XI. The following groupings show the circuit of the
various products, the "lbs." being Roman _librae_:--

              CHARGE.                                     PRODUCTS.

      { Crude ore               5,400 lbs.    } Primary matte (1)       600 lbs.
      { Lead slags              3 cartloads   }
  1st { Schist                  1 cartload    } Silver-copper alloy (A)  50  "
      { Flux                    20 lbs.       }
      { Concentrates from                     } Slags (B)
      {   slags & accretions   Small quantity }

      { Primary matte (1)       1,800 lbs.    } Secondary matte (2)   1,800 lbs.
      { Hearth-lead & litharge  1,200  "      }
      { Lead ore                  300  "      } Silver-copper-lead
  2nd { Rich hard cakes (A_{4})   500  "      }   alloy (liquation
      { Liquated cakes            200  "      }   cakes) (A_{2})      1,200  "
      { Slags (B)                             }
      { Concentrates from                     } Slags (B_{2})
      {   accretions                          }

      { Secondary matte (2)     1,800 lbs.    } Tertiary matte (3)    1,300 lbs.
      { Hearth-lead & litharge  1,200  "      } Silver-copper-lead
      { Lead ore                300  "        }   alloy (liquation
  3rd { Rich hard cakes (A_{4}) 500  "        }   cakes) (A_{3})      1,100  "
      { Slags (B_{2})                         } Slags (B_{3})
      { Concentrates from                     }
      {   accretions                          }

      { Tertiary matte (3)     11 cartloads   } Quaternary hard cakes
      { Poor hard cakes (A_{5}) 3    "        }    matte (4)          2,000 lbs.
  4th { Slags (B_{3})                         }    Rich hard cakes of
      { Concentrates from                     }    matte (A_{4})      1,500  "
      {   accretions                          }

      { Roasted quartz                        } Poor hard cakes of
  5th { Matte (4) (three                      }   matte (A_{5})       1,500 lbs.
      {   times roasted)       11 cartloads   } Final cakes of matte (5)

6th Final matte three times roasted is smelted to blister copper.

The following would be a rough approximation of the value of the various
products:--

  (1.)   Primary matte             =  158 ounces troy per short ton.
  (2.)   Secondary matte           =   85   "     "        "
  (3.)   Tertiary matte            =   60   "     "        "
  (4.)   Quaternary matte          =  Indeterminate.
   A.    Copper-silver alloy       =  388 ounces Troy per short ton.
   A_{2} Copper-silver-lead alloy  =  145   "      "          "
   A_{3}    "     "        "       =  109   "      "          "
   A_{4} Rich hard cakes           =   97   "      "          "
   A_{5} Poor hard cakes           =  Indeterminate.
         Final blister copper      =   12 ozs. Troy per short ton.

[47] This expression is usually used for hearth-lead, but in this case
the author is apparently confining himself to lead ore, and apparently
refers to lead carbonates. The German Translation gives _pleyschweiss_.
The pyrites mentioned in this paragraph may mean galena, as pyrites was
to Agricola a sort of genera.

[48] (_Excoquitur_) ... "_si vero pyrites, primo e fornace, ut
Goselariae videre licet, in catinum defluit liquor quidam candidus,
argento inimicus et nocivus; id enim comburit: quo circa recrementis,
quae supernatant, detractis effunditur: vel induratus conto uncinato
extrahitur: eundem liquorem parietes fornacis exudant._" In the Glossary
the following statement appears: "_Liquor candidus primo e fornace
defluens cum Goselariae excoquitur pyrites,--kobelt; quem parietes
fornacis exudant,--conterfei._" In this latter statement Agricola
apparently recognised that there were two different substances, _i.e._,
that the substance found in the furnace walls--_conterfei_--was not the
same substance as that which first flowed from the furnace--_kobelt_. We
are at no difficulty in recognizing _conterfei_ as metallic zinc; it was
long known by that term, and this accidental occurrence is repeatedly
mentioned by other authors after Agricola. The substance which first
flowed into the forehearth presents greater difficulties; it certainly
was not zinc. In _De Natura Fossilium_ (p. 347), Agricola says that at
Goslar the lead has a certain white slag floating upon it, the "colour
derived from the pyrites (_pyriten argenteum_) from which it was
produced." _Pyriten argenteum_ was either marcasite or mispickel,
neither of which offers much suggestion; nor are we able to hazard an
explanation of value.

HISTORICAL NOTE ON ZINC. The history of zinc metallurgy falls into two
distinct lines--first, that of the metal, and second, that of zinc ore,
for the latter was known and used to make brass by cementation with
copper and to yield oxides by sublimation for medicinal purposes, nearly
2,000 years before the metal became generally known and used in Europe.

There is some reason to believe that metallic zinc was known to the
Ancients, for bracelets made of it, found in the ruins of Cameros (prior
to 500 B.C.), may have been of that age (Raoul Jagnaux, _Traite de
Chimie Generale_, 1887, II, 385); and further, a passage in Strabo (63
B.C.-24 A.D.) is of much interest. He states: (XIII, 1, 56) "There is
found at Andeira a stone which when burnt becomes iron. It is then put
into a furnace, together with some kind of earth, when it distils a mock
silver (_pseudargyrum_), or with the addition of copper it becomes the
compound called _orichalcum_. There is found a mock silver near Tismolu
also." (Hamilton's Trans., II, p. 381). About the Christian era the
terms _orichalcum_ or _aurichalcum_ undoubtedly refer to brass, but
whether these terms as used by earlier Greek writers do not refer to
bronze only, is a matter of considerable doubt. Beyond these slight
references we are without information until the 16th Century. If the
metal was known to the Ancients it must have been locally, for by its
greater adaptability to brass-making it would probably have supplanted
the crude melting of copper with zinc minerals.

It appears that the metal may have been known in the Far East prior to
such knowledge in Europe; metallic zinc was imported in considerable
quantities from the East as early as the 16th and 17th centuries under
such terms as _tuteneque_, _tuttanego_, _calaem_, and _spiauter_--the
latter, of course, being the progenitor of our term spelter. The
localities of Eastern production have never been adequately
investigated. W. Hommel (Engineering and Mining Journal, June 15, 1912)
gives a very satisfactory review of the Eastern literature upon the
subject, and considers that the origin of manufacture was in India,
although the most of the 16th and 17th Century product came from China.
The earliest certain description seems to be some recipes for
manufacture quoted by Praphulla Chandra Ray (A History of Hindu
Chemistry, London, 1902, p. 39) dating from the 11th to the 14th
Centuries. There does not appear to be any satisfactory description of
the Chinese method until that of Sir George Staunton (Journal Asiatique
Paris, 1835, p. 141.) We may add that spelter was produced in India by
crude distillation of calamine in clay pots in the early part of the
19th Century (Brooke, Jour. Asiatic Soc. of Bengal, vol. XIX, 1850, p.
212), and the remains of such smelting in Rajputana are supposed to be
very ancient.

The discovery of zinc in Europe seems to have been quite independent of
the East, but precisely where and when is clouded with much uncertainty.
The _marchasita aurea_ of Albertus Magnus has been called upon to serve
as metallic zinc, but such belief requires a hypothesis based upon a
great deal of assumption. Further, the statement is frequently made that
zinc is mentioned in Basil Valentine's Triumphant Chariot of Antimony
(the only one of the works attributed to this author which may date
prior to the 17th Century), but we have been unable to find any such
reference. The first certain mention of metallic zinc is generally
accredited to Paracelsus (1493-1541), who states (_Liber Mineralium_
II.): "Moreover there is another metal generally unknown called
_zinken_. It is of peculiar nature and origin; many other metals
adulterate it. It can be melted, for it is generated from three fluid
principles; it is not malleable. Its colour is different from other
metals and does not resemble others in its growth. Its ultimate matter
(_ultima materia_) is not to me yet fully known. It admits of no mixture
and does not permit of the _fabricationes_ of other metals. It stands
alone entirely to itself." We do not believe that this book was
published until after Agricola's works. Agricola introduced the
following statements into his revised edition of _Bermannus_ (p. 431),
published in 1558: "It (a variety of pyrites) is almost the colour of
galena, but of entirely different components. From it there is made gold
and silver, and a great quantity is dug in Reichenstein, which is in
Silesia, as was recently reported to me. Much more is found at Raurici,
which they call _zincum_, which species differs from pyrites, for the
latter contains more silver than gold, the former only gold or hardly
any silver." In _De Natura Fossilium_ (p. 368): "For this _cadmia_ is
put, in the same way as quicksilver, in a suitable vessel so that the
heat of the fire will cause it to sublime, and from it is made a black
or brown or grey body which the Alchemists call _cadmia sublimata_. This
possesses corrosive properties to the highest degree. Cognate with this
_cadmia_ and pyrites is a compound which the Noricans and Rhetians call
_zincum_." We leave it to readers to decide how near this comes to
metallic zinc; in any event, he apparently did not recognise his
_conterfei_ from the furnaces as the same substance as the _zincum_ from
Silesia. The first correlation of these substances was apparently by
Lohneys, in 1617, who says (_Vom Bergwerk_, p. 83-4): "When the people
in the smelting works are smelting, there is made under the furnace and
in the cracks in the walls among the badly plastered stones, a metal
which is called _zinc_ or _counterfeht_, and when the wall is scraped it
falls into a vessel placed to receive it. This metal greatly resembles
tin, but it is harder and less malleable.... The Alchemists have a great
desire for this _zinc_ or bismuth." That this metal originated from
blende or calamine was not recognised until long after, and Libavis
(_Alchymia_, Frankfort, 1606), in describing specimens which came from
the East, did not so identify it, this office being performed by
Glauber, who says (_De Prosperitate Germanias_, Amsterdam, 1656): "Zink
is a volatile mineral or half-ripe metal when it is extracted from its
ore. It is more brilliant than tin and not so fusible or malleable ...
it turns (copper) into brass, as does _lapis calaminaris_, for indeed
this stone is nothing but infusible zinc, and this zinc might be called
a fusible _lapis calaminaris_, inasmuch as both of them partake of the
same nature.... It sublimates itself up into the cracks of the furnace,
whereupon the smelters frequently break it out." The systematic
distillation of zinc from calamine was not discovered in Europe until
the 18th Century. Henkel is generally accredited with the first
statement to that effect. In a contribution published as an Appendix to
his other works, of which we have had access only to a French
translation (_Pyritologie_, Paris, 1760, p. 494), he concludes that zinc
is a half-metal of which the best ore is calamine, but believes it is
always associated with lead, and mentions that an Englishman lately
arrived from Bristol had seen it being obtained from calamine in his own
country. He further mentions that it can be obtained by heating calamine
and lead ore mixed with coal in a thick earthen vessel. The Bristol
works were apparently those of John Champion, established about 1740.
The art of distillation was probably learned in the East.

Definite information as to the zinc minerals goes back to but a little
before the Christian Era, unless we accept nebular references to
_aurichalcum_ by the poets, or what is possibly zinc ore in the "earth"
mentioned by Aristotle (_De Mirabilibus_, 62): "Men say that the copper
of the Mossynoeci is very brilliant and white, no tin being mixed with
it; but there is a kind of earth there which is melted with it." This
might quite well be an arsenical mineral. But whether we can accept the
poets or Aristotle or the remark of Strabo given above, as sufficient
evidence or not, there is no difficulty with the description of _cadmia_
and _pompholyx_ and _spodos_ of Dioscorides (1st Century), parts of
which we reproduce in note 26, p. 394. His _cadmia_ is described as
rising from the copper furnaces and clinging to the iron bars, but he
continues: "_Cadmia_ is also prepared by burning the stone called
pyrites, which is found near Mt. Soloi in Cyprus.... Some say that
_cadmia_ may also be found in stone quarries, but they are deceived by
stones having a resemblance to _cadmia_." _Pompholyx_ and _spodos_ are
evidently furnace calamine. From reading the quotation given on p. 394,
there can be no doubt that these materials, natural or artificial, were
used to make brass, for he states (V, 46): "White _pompholyx_ is made
every time that the artificer in the working and perfecting of the
copper sprinkles powdered _cadmia_ upon it to make it more perfect, the
soot arising from this ... is _pompholyx_." Pliny is confused between
the mineral _cadmia_ and furnace _calamine_, and none of his statements
are very direct on the subject of brass making. His most pointed
statement is (XXXIV, 2): "... Next to Livian (copper) this kind best
absorbs _cadmia_, and is almost as good as _aurichalcum_ for making
sesterces and double asses." As stated above, there can be little doubt
that the _aurichalcum_ of the Christian Era was brass, and further, we
do know of brass sesterces of this period. Other Roman writers of this
and later periods refer to earth used with copper for making brass.
Apart from these evidences, however, there is the evidence of analyses
of coins and objects, the earliest of which appears to be a large brass
of the Cassia family of 20 B.C., analyzed by Phillips, who found 17.3%
zinc (Records of Mining and Metallurgy, London, 1857, p. 13). Numerous
analyses of coins and other objects dating during the following century
corroborate the general use of brass. Professor Gowland (Presidential
Address, Inst. of Metals, 1912) rightly considers the Romans were the
first to make brass, and at about the above period, for there appears to
be no certainty of any earlier production. The first adequate technical
description of brass making is in about 1200 A.D. being that of
Theophilus, who describes (Hendrie's Trans., p. 307) calcining
_calamina_ and mixing it with finely divided copper in glowing
crucibles. The process was repeated by adding more calamine and copper
until the pots were full of molten metal. This method is repeatedly
described with minor variations by Biringuccio, Agricola (_De Nat.
Fos._), and others, down to the 18th Century. For discussion of the zinc
minerals see note on p. 112.

[49] "_... non raro, ut nonnulli pyritae sunt, candida...._" This is
apparently the unknown substance mentioned above.

[50] One _drachma_ is about 3 ounces Troy per short ton. Three _unciae_
are about 72 ounces 6 dwts. Troy per short ton.

[51] In this section, which treats of the metallurgy of _plumbum
candidum_, "tin," the word _candidum_ is very often omitted in the
Latin, leaving only _plumbum_, which is confusing at times with lead.
The black tin-stone, _lapilli nigri_ has been treated in a similar
manner, _lapilli_ (small stones) constantly occurring alone in the
Latin. This has been rendered as "tin-stone" throughout, and the
material prior to extraction of the _lapilli nigri_ has been rendered
"tin-stuff," after the Cornish.

[52] "_... ex saxis vilibus, quae natura de diversa materia composuit._"
The Glossary gives _grindstein_. Granite (?).

[53] HISTORICAL NOTES ON TIN METALLURGY. The first appearance of tin
lies in the ancient bronzes. And while much is written upon the "Bronze
Age" by archaeologists, we seriously doubt whether or not a large part of
so-called bronze is not copper. In any event, this period varied with
each race, and for instance, in Britain may have been much later than
Egyptian historic times. The bronze articles of the IV Dynasty (from
3800 to 4700 B.C. depending on the authority) place us on certain ground
of antiquity. Professor Gowland (Presidential Address, Inst. of Metals,
London, 1912) maintains that the early bronzes were the result of direct
smelting of stanniferous copper ores, and while this may be partially
true for Western Europe, the distribution and nature of the copper
deposits do not warrant this assumption for the earlier scenes of human
activity--Asia Minor, Egypt, and India. Further, the lumps of rough tin
and also of copper found by Borlase (Tin Mining in Spain, Past and
Present, London, 1897, p. 25) in Cornwall, mixed with bronze celts under
conditions certainly indicating the Bronze Age, is in itself of
considerable evidence of independent melting. To our mind the vast
majority of ancient bronzes must have been made from copper and tin
mined and smelted independently. As to the source of supply of ancient
tin, we are on clear ground only with the advent of the Phoenicians,
1500-1000 B.C., who, as is well known, distributed to the ancient world
a supply from Spain and Britain. What the source may have been prior to
this time has been subject to much discussion, and while some slender
threads indicate the East, we believe that a more local supply to Egypt,
etc., is not impossible. The discovery of large tin fields in Central
Africa and the native-made tin ornaments in circulation among the
negroes, made possible the entrance of the metal into Egypt along the
trade routes. Further, we see no reason why alluvial tin may not have
existed within easy reach and have become exhausted. How quickly such a
source of metal supply can be forgotten and no evidence remain, is
indicated by the seldom remembered alluvial gold supply from Ireland.
However, be these conjectures as they may, the East has long been the
scene of tin production and of transportation activity. Among the
slender evidences that point in this direction is that the Sanskrit term
for tin is _kastira_, a term also employed by the Chaldeans, and
represented in Arabic by _kasdir_, and it may have been the progenitor
of the Greek _cassiteros_. There can be no doubt that the Phoenicians
also traded with Malacca, etc., but beyond these threads there is little
to prove the pre-western source. The strained argument of Beckmann
(Hist. of Inventions, vol. II., p. 207) that the _cassiteros_ of Homer
and the _bedil_ of the Hebrews was possibly not tin, and that tin was
unknown at this time, falls to the ground in the face of the vast amount
of tin which must have been in circulation to account for the bronze
used over a period 2,000 years prior to those peoples. Tin is early
mentioned in the Scriptures (Numbers XXXI, 22), being enumerated among
the spoil of the Midianites (1200 B.C.?), also Ezekiel (600 B.C., XXVII,
12) speaks of tin from Tarshish (the Phoenician settlement on the
coast of Spain). According to Homer tin played considerable part in
Vulcan's metallurgical stores. Even approximately at what period the
Phoenicians began their distribution from Spain and Britain cannot be
determined. They apparently established their settlements at Gades
(Cadiz) in Tarshish, beyond Gibraltar, about 1100 B.C. The remains of
tin mining in the Spanish peninsula prior to the Christian Era indicate
most extensive production by the Phoenicians, but there is little
evidence as to either mining or smelting methods. Generally as to the
technical methods of mining and smelting tin, we are practically without
any satisfactory statement down to Agricola. However, such scraps of
information as are available are those in Homer (see note on p. 402),
Diodorus, and Pliny.

Diodorus says (V, 2) regarding tin in Spain: "They dig it up, and melt
it down in the same way as they do gold and silver;" and again, speaking
of the tin in Britain, he says: "These people make tin, which they dig
up with a great deal of care and labour; being rocky, the metal is mixed
with earth, out of which they melt the metal, and then refine it." Pliny
(XXXIV, 47), in the well-known and much-disputed passage: "Next to be
considered are the characteristics of lead, which is of two kinds, black
and white. The most valuable is the white; the Greeks called it
_cassiteros_, and there is a fabulous story of its being searched for
and carried from the islands of Atlantis in barks covered with hides.
Certainly it is obtained in Lusitania and Gallaecia on the surface of
the earth from black-coloured sand. It is discovered by its great
weight, and it is mixed with small pebbles in the dried beds of
torrents. The miners wash these sands, and that which settles they heat
in the furnace. It is also found in gold mines, which are called
_alutiae_. A stream of water passing through detaches small black
pebbles variegated with white spots, the weight of which is the same as
gold. Hence it is that they remain in the baskets of the gold collectors
with the gold; afterward, they are separated in a _camillum_ and when
melted become white lead."

There is practically no reference to the methods of Cornish tin-working
over the whole period of 2,000 years that mining operations were carried
on there prior to the Norman occupation. From then until Agricola's
time, a period of some four centuries, there are occasional references
in Stannary Court proceedings, Charters, and such-like official
documents which give little metallurgical insight. From a letter of
William de Wrotham, Lord Warden of the Stannaries, in 1198, setting out
the regulations for the impost on tin, it is evident that the black tin
was smelted once at the mines and that a second smelting or refining was
carried out in specified towns under the observation of the Crown
Officials. In many other official documents there are repeated
references to the right to dig turfs and cut wood for smelting the tin.
Under note 8, p. 282, we give some further information on tin
concentration, and the relation of Cornish and German tin miners.
Biringuccio (1540) gives very little information on tin metallurgy, and
we are brought to _De Re Metallica_ for the first clear exposition.

As to the description on these pages it must be remembered that the
tin-stone has been already roasted, thus removing some volatile
impurities and oxidizing others, as described on page 348. The furnaces
and the methods of working the tin, here described, are almost identical
with those in use in Saxony to-day. In general, since Agricola's time
tin has not seen the mechanical and metallurgical development of the
other metals. The comparatively small quantities to be dealt with; the
necessity of maintaining a strong reducing atmosphere, and consequently
a mild cold blast; and the comparatively low temperature demanded, gave
little impetus to other than crude appliances until very modern times.

[54] _Aureo nummo_. German Translation gives _reinschen guelden_, which
was the equivalent of about $1.66, or 6.9 shillings. The purchasing
power of money was, however, several times as great as at present.

[55] In the following descriptions of iron-smelting, we have three
processes described; the first being the direct reduction of malleable
iron from ore, the second the transition stage then in progress from the
direct to indirect method by way of cast-iron; and the third a method of
making steel by cementation. The first method is that of primitive
iron-workers of all times and all races, and requires little comment. A
pasty mass was produced, which was subsequently hammered to make it
exude the slag, the hammered mass being the ancient "bloom." The second
process is of considerable interest, for it marks one of the earliest
descriptions of working iron in "a furnace similar to a blast furnace,
but much wider and higher." This original German _Stueckofen_ or high
bloomery furnace was used for making "masses" of wrought-iron under
essentially the same conditions as its progenitor the forge--only upon a
larger scale. With high temperatures, however, such a furnace would, if
desired, yield molten metal, and thus the step to cast-iron as a
preliminary to wrought-iron became very easy and natural, in fact
Agricola mentions above that if the iron is left to settle in the
furnace it becomes hard. The making of malleable iron by subsequent
treatment of the cast-iron--the indirect method--originated in about
Agricola's time, and marks the beginning of one of those subtle economic
currents destined to have the widest bearing upon civilization. It is to
us uncertain whether he really understood the double treatment or not.
In the above paragraph he says from ore "once or twice smelted they make
iron," etc., and in _De Natura Fossilium_ (p. 339) some reference is
made to pouring melted iron, all of which would appear to be cast-iron.
He does not, however, describe the 16th Century method of converting
cast into wrought iron by way of in effect roasting the pig iron to
eliminate carbon by oxidation, with subsequent melting into a "ball" or
"mass." It must be borne in mind that puddling for this purpose did not
come into use until the end of the 18th Century. A great deal of
discussion has arisen as to where and at what time cast-iron was made
systematically, but without satisfactory answer; in any event, it seems
to have been in about the end of the 14th Century, as cast cannon began
to appear about that time. It is our impression that the whole of this
discussion on iron in _De Re Metallica_ is an abstract from Biringuccio,
who wrote 15 years earlier, as it is in so nearly identical terms. Those
interested will find a translation of Biringuccio's statement with
regard to steel in Percy's Metallurgy of Iron and Steel, London, 1864,
p. 807.

HISTORICAL NOTE ON IRON SMELTING. The archaeologists' division of the
history of racial development into the Stone, Bronze, and Iron Ages,
based upon objects found in tumuli, burial places, etc., would on the
face of it indicate the prior discovery of copper metallurgy over iron,
and it is generally so maintained by those scientists. The metallurgists
have not hesitated to protest that while this distinction of "Ages" may
serve the archaeologists, and no doubt represents the sequence in which
the metal objects are found, yet it by no means follows that this was
the order of their discovery or use, but that iron by its rapidity of
oxidation has simply not been preserved. The arguments which may be
advanced from our side are in the main these. Iron ore is of more
frequent occurrence than copper ores, and the necessary reduction of
copper oxides (as most surface ores must have been) to fluid metal
requires a temperature very much higher than does the reduction of iron
oxides to wrought-iron blooms, which do not necessitate fusion. The
comparatively greater simplicity of iron metallurgy under primitive
conditions is well exemplified by the hill tribes of Northern Nigeria,
where in village forges the negroes reduce iron sufficient for their
needs, from hematite. Copper alone would not be a very serviceable metal
to primitive man, and he early made the advance to bronze; this latter
metal requires three metallurgical operations, and presents immeasurably
greater difficulties than iron. It is, as Professor Gowland has
demonstrated (Presidential Address, Inst. of Metals, London, 1912) quite
possible to make bronze from melting stanniferous copper ores, yet such
combined occurrence at the surface is rare, and, so far as known, the
copper sources from which Asia Minor and Egypt obtained their supply do
not contain tin. It seems to us, therefore, that in most cases the
separate fusions of different ores and their subsequent re-melting were
required to make bronze. The arguments advanced by the archaeologists
bear mostly upon the fact that, had iron been known, its superiority
would have caused the primitive races to adopt it, and we should not
find such an abundance of bronze tools. As to this, it may be said that
bronze weapons and tools are plentiful enough in Egyptian, Mycenaean, and
early Greek remains, long after iron was demonstrably well known. There
has been a good deal pronounced by etymologists on the history of iron
and copper, for instance, by Max Mueller, (Lectures on the Science of
Language, Vol. II, p. 255, London, 1864), and many others, but the
amazing lack of metallurgical knowledge nullifies practically all their
conclusions. The oldest Egyptian texts extant, dating 3500 B.C., refer
to iron, and there is in the British Museum a piece of iron found in the
Pyramid of Kephron (3700 B.C.) under conditions indicating its
co-incident origin. There is exhibited also a fragment of oxidized iron
lately found by Professor Petrie and placed as of the VI Dynasty (B.C.
3200). Despite this evidence of an early knowledge of iron, there is
almost a total absence of Egyptian iron objects for a long period
subsequent to that time, which in a measure confirms the view of its
disappearance rather than that of ignorance of it. Many writers have
assumed that the Ancients must have had some superior art of hardening
copper or bronze, because the cutting of the gigantic stonework of the
time could not have been done with that alloy as we know it; no such
hardening appears among the bronze tools found, and it seems to us that
the argument is stronger that the oldest Egyptian stoneworkers employed
mostly iron tools, and that these have oxidized out of existence. The
reasons for preferring copper alloys to iron for decorative objects were
equally strong in ancient times as in the present day, and accounts
sufficiently for these articles, and, therefore, iron would be devoted
to more humble objects less likely to be preserved. Further, the
Egyptians at a later date had some prejudices against iron for sacred
purposes, and the media of preservation of most metal objects were not
open to iron. We know practically nothing of very early Egyptian
metallurgy, but in the time of Thotmes III. (1500 B.C.) bellows were
used upon the forge.

Of literary evidences the earliest is in the Shoo King among the Tribute
of Yue (2500 B.C.?). Iron is frequently mentioned in the Bible, but it is
doubtful if any of the early references apply to steel. There is
scarcely a Greek or Latin author who does not mention iron in some
connection, and of the earliest, none are so suggestive from a
metallurgical point of view as Homer, by whom "laboured" mass
(wrought-iron?) is often referred to. As, for instance, in the Odyssey
(I., 234) Pallas in the guise of Mentes, says according to Pope:

    "Freighted with iron from my native land
    I steer my voyage to the Brutian strand,
    To gain by commerce for the laboured mass
    A just proportion of refulgent brass."

(Brass is modern poetic licence for copper or bronze). Also, in the
Odyssey (IX, 465) when Homer describes how Ulysses plunged the stake
into Cyclop's eye, we have the first positive evidence of steel,
although hard iron mentioned in the Tribute of Yue, above referred to, is
sometimes given as steel:

    "And as when armourers temper in the ford
    The keen-edg'd pole-axe, or the shining sword,
    The red-hot metal hisses in the lake."

No doubt early wrought-iron was made in the same manner as Agricola
describes. We are, however, not so clear as to the methods of making
steel. Under primitive methods of making wrought-iron it is quite
possible to carburize the iron sufficiently to make steel direct from
ore. The primitive method of India and Japan was to enclose lumps of
wrought-iron in sealed crucibles with charcoal and sawdust, and heat
them over a long period. Neither Pliny nor any of the other authors of
the period previous to the Christian Era give us much help on steel
metallurgy, although certain obscure expressions of Aristotle have been
called upon (for instance, St. John V. Day, Prehistoric Use of Iron and
Steel, London, 1877, p. 134) to prove its manufacture by immersing
wrought-iron in molten cast-iron.

[56] _Quae vel aerosa est, vel cocta_. It is by no means certain that
_cocta_, "cooked" is rightly translated, for the author has not hitherto
used this expression for heated. This may be residues from roasting and
leaching pyrites for vitriol, etc.

[57] Agricola draws no sharp line of distinction between antimony the
metal, and its sulphide. He uses the Roman term _stibi_ or _stibium_
(_Interpretatio_,--_Spiesglas_) throughout this book, and evidently in
most cases means the sulphide, but in others, particularly in parting
gold and silver, metallic antimony would be reduced out. We have been in
much doubt as to the term to introduce into the text, as the English
"stibnite" carries too much precision of meaning. Originally the
"antimony" of trade was the sulphide. Later, with the application of
that term to the metal, the sulphide was termed "grey antimony," and we
have either used _stibium_ for lack of better alternative, or adopted
"grey antimony." The method described by Agricola for treating antimony
sulphide is still used in the Harz, in Bohemia, and elsewhere. The
stibnite is liquated out at a low heat and drips from the upper to the
lower pot. The resulting purified antimony sulphide is the modern
commercial "crude antimony" or "grey antimony."

HISTORICAL NOTE ON THE METALLURGY OF ANTIMONY. The Egyptologists have
adopted the term "antimony" for certain cosmetics found in Egyptian
tombs from a very early period. We have, however, failed to find any
reliable analyses which warrant this assumption, and we believe that it
is based on the knowledge that antimony was used as a base for eye
ointments in Greek and Roman times, and not upon proper chemical
investigation. It may be that the ideograph which is interpreted as
antimony may really mean that substance, but we only protest that the
chemist should have been called in long since. In St. Jerome's
translation of the Bible, the cosmetic used by Jezebel (II. Kings IX,
30) and by the lady mentioned by Ezekiel (XXIII, 40), "who didst wash
thyself and paintedst thine eyes" is specifically given as _stibio_. Our
modern translation carries no hint of the composition of the cosmetic,
and whether some of the Greek or Hebrew MSS. do furnish a basis for such
translation we cannot say. The Hebrew term for this mineral was _kohl_,
which subsequently passed into "alcool" and "alkohol" in other
languages, and appears in the Spanish Bible in the above passage in
Ezekiel as _alcoholaste_. The term _antimonium_ seems to have been first
used in Latin editions of Geber published in the latter part of the 15th
Century. In any event, the metal is clearly mentioned by Dioscorides
(1st Century), who calls it _stimmi_, and Pliny, who termed it
_stibium_, and they leave no doubt that it was used as a cosmetic for
painting the eyebrows and dilating the eyes. Dioscorides (V, 59) says:
"The best _stimmi_ is very brilliant and radiant. When broken it divides
into layers with no part earthy or dirty; it is brittle. Some call it
_stimmi_, others _platyophthalmon_ (wide eyed); others _larbason_,
others _gynaekeion_ (feminine).... It is roasted in a ball of dough with
charcoal until it becomes a cinder.... It is also roasted by putting it
on live charcoal and blowing it. If it is roasted too much it becomes
lead." Pliny states (XXXIII, 33 and 34): "In the same mines in which
silver is found, properly speaking there is a stone froth. It is white
and shining, not transparent; is called _stimmi_, or _stibi_, or
_alabastrum_, and _larbasis_. There are two kinds of it, the male and
the female. The most approved is the female, the male being more uneven,
rougher, less heavy, not so radiant, and more gritty. The female kind is
bright and friable, laminar and not globular. It is astringent and
refrigerative, and its principal use is for the eyes.... It is burned in
manure in a furnace, is quenched with milk, ground with rain water in a
mortar, and while thus turbid it is poured into a copper vessel and
purified with nitrum ... above all in roasting it care should be taken
that it does not turn to lead." There can be little doubt from
Dioscorides' statement of its turning to lead that he had seen the metal
antimony, although he thought it a species of lead. Of further interest
in connection with the ancient knowledge of the metal is the Chaldean
vase made of antimony described by Berthelot (_Comptes Rendus_, 1887,
CIV, 265). It is possible that Agricola knew the metal, although he
gives no details as to de-sulphurizing it or for recovering the metal
itself. In _De Natura Fossilium_ (p. 181) he makes a statement which
would indicate the metal, "_Stibium_ when melted in the crucible and
refined has as much right to be regarded as a metal as is accorded to
lead by most writers. If when smelted a certain portion be added to tin,
a printer's alloy is made from which type is cast that is used by those
who print books." Basil Valentine, in his "Triumphal Chariot of
Antimony," gives a great deal that is new with regard to this metal,
even if we can accredit the work with no earlier origin than its
publication--about 1600; it seems possible however, that it was written
late in the 15th Century (see Appendix B). He describes the preparation
of the metal from the crude ore, both by roasting and reduction from the
oxide with argol and saltpetre, and also by fusing with metallic iron.
While the first description of these methods is usually attributed to
Valentine, it may be pointed out that in the _Probierbuechlein_ (1500) as
well as in Agricola the separation of silver from iron by antimony
sulphide implies the same reaction, and the separation of silver and
gold with antimony sulphide, often attributed to Valentine, is
repeatedly set out in the _Probierbuechlein_ and in _De Re Metallica_.
Biringuccio (1540) has nothing of importance to say as to the treatment
of antimonial ores, but mentions it as an alloy for bell-metal, which
would imply the metal.

[58] HISTORICAL NOTE ON THE METALLURGY OF QUICKSILVER. The earliest
mention of quicksilver appears to have been by Aristotle
(_Meteorologica_ IV, 8, 11), who speaks of it as fluid silver (_argyros
chytos_). Theophrastus (105) states: "Such is the production of
quicksilver, which has its uses. This is obtained from cinnabar rubbed
with vinegar in a brass mortar with a brass pestle." (Hill's Trans., p.
139). Theophrastus also (103) mentions cinnabar from Spain and
elsewhere. Dioscorides (V, 70) appears to be the first to describe the
recovery of quicksilver by distillation: "Quicksilver (_hydrargyros_,
_i.e._, liquid silver) is made from _ammion_, which is called
_cinnabari_. An iron bowl containing _cinnabari_ is put into an earthen
vessel and covered over with a cup-shaped lid smeared with clay. Then it
is set on a fire of coals and the soot which sticks to the cover when
wiped off and cooled is quicksilver. Quicksilver is also found in drops
falling from the walls of the silver mines. Some say there are
quicksilver mines. It can be kept only in vessels of glass, lead, tin
(?), or silver, for if put in vessels of any other substances it
consumes them and flows through." Pliny (XXXIII, 41): "There has been
discovered a way of extracting _hydrargyros_ from the inferior _minium_
as a substitute for quicksilver, as mentioned. There are two methods:
either by pounding _minium_ and vinegar in a brass mortar with a brass
pestle, or else by putting _minium_ into a flat earthen dish covered
with a lid, well luted with potter's clay. This is set in an iron pan
and a fire is then lighted under the pan, and continually blown by a
bellows. The perspiration collects on the lid and is wiped off and is
like silver in colour and as liquid as water." Pliny is somewhat
confused over the _minium_--or the text is corrupt, for this should be
the genuine _minium_ of Roman times. The methods of condensation on the
leaves of branches placed in a chamber, of condensing in ashes placed
over the mouth of the lower pot, and of distilling in a retort, are
referred to by Biringuccio (A.D. 1540), but with no detail.

[59] Most of these methods depend upon simple liquation of native
bismuth. The sulphides, oxides, etc., could not be obtained without
fusing in a furnace with appropriate de-sulphurizing or reducing agents,
to which Agricola dimly refers. In _Bermannus_ (p. 439), he says:
"_Bermannus_.--I will show you another kind of mineral which is numbered
amongst metals, but appears to me to have been unknown to the Ancients;
we call it _bisemutum_. _Naevius_.--Then in your opinion there are more
kinds of metals than the seven commonly believed? _Bermannus_.--More, I
consider; for this which just now I said we called _bisemutum_, cannot
correctly be called _plumbum candidum_ (tin) nor _nigrum_ (lead), but is
different from both, and is a third one. _Plumbum candidum_ is whiter
and _plumbum nigrum_ is darker, as you see. _Naevius_.--We see that this
is of the colour of _galena_. _Ancon_.--How then can _bisemutum_, as you
call it, be distinguished from _galena_? _Bermannus_.--Easily; when you
take it in your hands it stains them with black unless it is quite hard.
The hard kind is not friable like _galena_, but can be cut. It is
blacker than the kind of crude silver which we say is almost the colour
of lead, and thus is different from both. Indeed, it not rarely contains
some silver. It generally shows that there is silver beneath the place
where it is found, and because of this our miners are accustomed to call
it the 'roof of silver.' They are wont to roast this mineral, and from
the better part they make metal; from the poorer part they make a
pigment of a kind not to be despised." This pigment was cobalt blue (see
note on p. 112), indicating a considerable confusion of these minerals.
This quotation is the first description of bismuth, and the above text
the first description of bismuth treatment. There is, however, bare
mention of the mineral earlier, in the following single line from the
_Probierbuechlein_ (p. 1): "Jupiter (controls) the ores of tin and
_wismundt_." And it is noted in the _Nuetzliche Bergbuechlein_ in
association with silver (see Appendix B).

[60] This _cadmia_ is given in the German translation as _kobelt_. It is
probably the cobalt-arsenic-bismuth minerals common in Saxony. A large
portion of the world's supply of bismuth to-day comes from the cobalt
treatment works near Schneeberg. For further discussion of _cadmia_ see
note on p. 112.




BOOK X.


Questions as to the methods of smelting ores and of obtaining metals I
discussed in Book IX. Following this, I should explain in what manner
the precious metals are parted from the base metals, or on the other
hand the base metals from the precious[1]. Frequently two metals,
occasionally more than two, are melted out of one ore, because in nature
generally there is some amount of gold in silver and in copper, and some
silver in gold, copper, lead, and iron; likewise some copper in gold,
silver, lead, and iron, and some lead in silver; and lastly, some iron
in copper[2]. But I will begin with gold.

Gold is parted from silver, or likewise the latter from the former,
whether it be mixed by nature or by art, by means of _aqua valens_[3],
and by powders which consist of almost the same things as this _aqua_.
In order to preserve the sequence, I will first speak of the ingredients
of which this _aqua_ is made, then of the method of making it, then of
the manner in which gold is parted from silver or silver from gold.
Almost all these ingredients contain vitriol or alum, which, by
themselves, but much more when joined with saltpetre, are powerful to
part silver from gold. As to the other things that are added to them,
they cannot individually by their own strength and nature separate those
metals, but joined they are very powerful. Since there are many
combinations, I will set out a few. In the first, the use of which is
common and general, there is one _libra_ of vitriol and as much salt,
added to a third of a _libra_ of spring water. The second contains two
_librae_ of vitriol, one of saltpetre, and as much spring or river water
by weight as will pass away whilst the vitriol is being reduced to
powder by the fire. The third consists of four _librae_ of vitriol, two
and a half _librae_ of saltpetre, half a _libra_ of alum, and one and a
half _librae_ of spring water. The fourth consists of two _librae_ of
vitriol, as many _librae_ of saltpetre, one quarter of a _libra_ of
alum, and three-quarters of a _libra_ of spring water. The fifth is
composed of one _libra_ of saltpetre, three _librae_ of alum, half a
_libra_ of brick dust, and three-quarters of a _libra_ of spring water.
The sixth consists of four _librae_ of vitriol, three _librae_ of
saltpetre, one of alum, one _libra_ likewise of stones which when thrown
into a fierce furnace are easily liquefied by fire of the third order,
and one and a half _librae_ of spring water. The seventh is made of two
_librae_ of vitriol, one and a half _librae_ of saltpetre, half a
_libra_ of alum, and one _libra_ of stones which when thrown into a
glowing furnace are easily liquefied by fire of the third order, and
five-sixths of a _libra_ of spring water. The eighth is made of two
_librae_ of vitriol, the same number of _librae_ of saltpetre, one and a
half _librae_ of alum, one _libra_ of the lees of the _aqua_ which parts
gold from silver; and to each separate _libra_ a sixth of urine is
poured over it. The ninth contains two _librae_ of powder of baked
bricks, one _libra_ of vitriol, likewise one _libra_ of saltpetre, a
handful of salt, and three-quarters of a _libra_ of spring water. Only
the tenth lacks vitriol and alum, but it contains three _librae_ of
saltpetre, two _librae_ of stones which when thrown into a hot furnace
are easily liquefied by fire of the third order, half a _libra_ each of
verdigris[4], of _stibium_, of iron scales and filings, and of
asbestos[5], and one and one-sixth _librae_ of spring water.

All the vitriol from which the _aqua_ is usually made is first reduced
to powder in the following way. It is thrown into an earthen crucible
lined on the inside with litharge, and heated until it melts; then it is
stirred with a copper wire, and after it has cooled it is pounded to
powder. In the same manner saltpetre melted by the fire is pounded to
powder when it has cooled. Some indeed place alum upon an iron plate,
roast it, and make it into powder.

Although all these _aquae_ cleanse gold concentrates or dust from
impurities, yet there are certain compositions which possess singular
power. The first of these consists of one _libra_ of verdigris and
three-quarters of a _libra_ of vitriol. For each _libra_ there is poured
over it one-sixth of a _libra_ of spring or river water, as to which,
since this pertains to all these compounds, it is sufficient to have
mentioned once for all. The second composition is made from one _libra_
of each of the following, artificial orpiment, vitriol, lime, alum, ash
which the dyers of wool use, one quarter of a _libra_ of verdigris, and
one and a half _unciae_ of _stibium_. The third consists of three
_librae_ of vitriol, one of saltpetre, half a _libra_ of asbestos, and
half a _libra_ of baked bricks. The fourth consists of one _libra_ of
saltpetre, one _libra_ of alum, and half a _libra_ of sal-ammoniac.[6]

[Illustration 442 (Nitric Acid Making): A--Furnace. B--Its round hole.
C--Air-holes. D--Mouth of the furnace. E--Draught opening under it.
F--Earthenware crucible. G--Ampulla. H--Operculum. I--Its spout.
K--Other ampulla. L--Basket in which this is usually placed lest it be
broken.]

The furnace in which _aqua valens_ is made[7] is built of bricks,
rectangular, two feet long and wide, and as many feet high and a half
besides. It is covered with iron plates supported with iron rods; these
plates are smeared on the top with lute, and they have in the centre a
round hole, large enough to hold the earthen vessel in which the glass
ampulla is placed, and on each side of the centre hole are two small
round air-holes. The lower part of the furnace, in order to hold the
burning charcoal, has iron plates at the height of a palm, likewise
supported by iron rods. In the middle of the front there is the mouth,
made for the purpose of putting the fire into the furnace; this mouth is
half a foot high and wide, and rounded at the top, and under it is the
draught opening. Into the earthen vessel set over the hole is placed
clean sand a digit deep, and in it the glass ampulla is set as deeply as
it is smeared with lute. The lower quarter is smeared eight or ten times
with nearly liquid lute, each time to the thickness of a blade, and each
time it is dried again, until it has become as thick as the thumb; this
kind of lute is well beaten with an iron rod, and is thoroughly mixed
with hair or cotton thread, or with wool and salt, that it should not
crackle. The many things of which the compounds are made must not fill
the ampulla completely, lest when boiling they rise into the operculum.
The operculum is likewise made of glass, and is closely joined to the
ampulla with linen, cemented with wheat flour and white of egg moistened
with water, and then lute free from salt is spread over that part of it.
In a similar way the spout of the operculum is joined by linen covered
with lute to another glass ampulla which receives the distilled _aqua_.
A kind of thin iron nail or small wooden peg, a little thicker than a
needle, is fixed in this joint, in order that when air seems necessary
to the artificer distilling by this process he can pull it out; this is
necessary when too much of the vapour has been driven into the upper
part. The four air-holes which, as I have said, are on the top of the
furnace beside the large hole on which the ampulla is placed, are
likewise covered with lute.

All this preparation having been accomplished in order, and the
ingredients placed in the ampulla, they are gradually heated over
burning charcoal until they begin to exhale vapour and the ampulla is
seen to trickle with moisture. But when this, on account of the rising
of the vapour, turns red, and the _aqua_ distils through the spout of
the operculum, then one must work with the utmost care, lest the drops
should fall at a quicker rate than one for every five movements of the
clock or the striking of its bell, and not slower than one for every
ten; for if it falls faster the glasses will be broken, and if it drops
more slowly the work begun cannot be completed within the definite time,
that is within the space of twenty-four hours. To prevent the first
accident, part of the coals are extracted by means of an iron implement
similar to pincers; and in order to prevent the second happening, small
dry pieces of oak are placed upon the coals, and the substances in the
ampulla are heated with a sharper fire, and the air-holes on the furnace
are re-opened if need arise. As soon as the drops are being distilled,
the glass ampulla which receives them is covered with a piece of linen
moistened with water, in order that the powerful vapour which arises
may be repelled. When the ingredients have been heated and the ampulla
in which they were placed is whitened with moisture, it is heated by a
fiercer fire until all the drops have been distilled[8]. After the
furnace has cooled, the _aqua_ is filtered and poured into a small glass
ampulla, and into the same is put half a _drachma_ of silver[9], which
when dissolved makes the turbid _aqua_ clear. This is poured into the
ampulla containing all the rest of the _aqua_, and as soon as the lees
have sunk to the bottom the _aqua_ is poured off, removed, and reserved
for use.

Gold is parted from silver by the following method[10]. The alloy, with
lead added to it, is first heated in a cupel until all the lead is
exhaled, and eight ounces of the alloy contain only five _drachmae_ of
copper or at most six, for if there is more copper in it, the silver
separated from the gold soon unites with it again. Such molten silver
containing gold is formed into granules, being stirred by means of a rod
split at the lower end, or else is poured into an iron mould, and when
cooled is made into thin leaves. As the process of making granules from
argentiferous gold demands greater care and diligence than making them
from any other metals, I will now explain the method briefly. The alloy
is first placed in a crucible, which is then covered with a lid and
placed in another earthen crucible containing a few ashes. Then they are
placed in the furnace, and after they are surrounded by charcoal, the
fire is blown by the blast of a bellows, and lest the charcoal fall away
it is surrounded by stones or bricks. Soon afterward charcoal is thrown
over the upper crucible and covered with live coals; these again are
covered with charcoal, so that the crucible is surrounded and covered on
all sides with it. It is necessary to heat the crucibles with charcoal
for the space of half an hour or a little longer, and to provide that
there is no deficiency of charcoal, lest the alloy become chilled; after
this the air is blown in through the nozzle of the bellows, that the
gold may begin to melt. Soon afterward it is turned round, and a test is
quickly taken to see whether it be melted, and if it is melted, fluxes
are thrown into it; it is advisable to cover up the crucible again
closely that the contents may not be exhaled. The contents are heated
together for as long as it would take to walk fifteen paces, and then
the crucible is seized with tongs and the gold is emptied into an oblong
vessel containing very cold water, by pouring it slowly from a height so
that the granules will not be too big; in proportion as they are
lighter, more fine and more irregular, the better they are, therefore
the water is frequently stirred with a rod split into four parts from
the lower end to the middle.

The leaves are cut into small pieces, and they or the silver granules
are put into a glass ampulla, and the _aqua_ is poured over them to a
height of a digit above the silver. The ampulla is covered with a
bladder or with waxed linen, lest the contents exhale. Then it is heated
until the silver is dissolved, the indication of which is the bubbling
of the _aqua_. The gold remains in the bottom, of a blackish colour, and
the silver mixed with the _aqua_ floats above. Some pour the latter into
a copper bowl and pour into it cold water, which immediately congeals
the silver; this they take out and dry, having poured off the
_aqua_[11]. They heat the dried silver in an earthenware crucible until
it melts, and when it is melted they pour it into an iron mould.

The gold which remains in the ampulla they wash with warm water, filter,
dry, and heat in a crucible with a little _chrysocolla_ which is called
borax, and when it is melted they likewise pour it into an iron mould.

Some workers, into an ampulla which contains gold and silver and the
_aqua_ which separates them, pour two or three times as much of this
_aqua valens_ warmed, and into the same ampulla or into a dish into
which all is poured, throw fine leaves of black lead and copper; by this
means the gold adheres to the lead and the silver to the copper, and
separately the lead from the gold, and separately the copper from the
silver, are parted in a cupel. But no method is approved by us which
loses the _aqua_ used to part gold from silver, for it might be used
again[12].

[Illustration 446 (Parting precious metals with nitric acid):
A--Ampullae arranged in the vessels. B--An ampulla standing upright
between iron rods. C--Ampullae placed in the sand which is contained in
a box, the spouts of which reach from the opercula into ampullae placed
under them. D--Ampullae likewise placed in sand which is contained in a
box, of which the spouts from the opercula extend crosswise into
ampullae placed under them. E--Other ampullae receiving the distilled
_aqua_ and likewise arranged in sand contained in the lower boxes.
F--Iron tripod, in which the ampulla is usually placed when there are
not many particles of gold to be parted from the silver. G--Vessel.]

A glass ampulla, which bulges up inside at the bottom like a cone, is
covered on the lower part of the outside with lute in the way explained
above, and into it is put silver bullion weighing three and a half Roman
_librae_. The _aqua_ which parts the one from the other is poured into
it, and the ampulla is placed in sand contained in an earthen vessel, or
in a box, that it may be warmed with a gentle fire. Lest the _aqua_
should be exhaled, the top of the ampulla is plastered on all sides with
lute, and it is covered with a glass operculum, under whose spout is
placed another ampulla which receives the distilled drops; this receiver
is likewise arranged in a box containing sand. When the contents are
heated it reddens, but when the redness no longer appears to increase,
it is taken out of the vessel or box and shaken; by this motion the
_aqua_ becomes heated again and grows red; if this is done two or three
times before other _aqua_ is added to it, the operation is sooner
concluded, and much less _aqua_ is consumed. When the first charge has
all been distilled, as much silver as at first is again put into the
ampulla, for if too much were put in at once, the gold would be parted
from it with difficulty. Then the second _aqua_ is poured in, but it is
warmed in order that it and the ampulla may be of equal temperature, so
that the latter may not be cracked by the cold; also if a cold wind
blows on it, it is apt to crack. Then the third _aqua_ is poured in, and
also if circumstances require it, the fourth, that is to say more _aqua_
and again more is poured in until the gold assumes the colour of burned
brick. The artificer keeps in hand two _aquae_, one of which is stronger
than the other; the stronger is used at first, then the less strong,
then at the last again the stronger. When the gold becomes of a reddish
yellow colour, spring water is poured in and heated until it boils. The
gold is washed four times and then heated in the crucible until it
melts. The water with which it was washed is put back, for there is a
little silver in it; for this reason it is poured into an ampulla and
heated, and the drops first distilled are received by one ampulla, while
those which come later, that is to say when the operculum begins to get
red, fall into another. This latter _aqua_ is useful for testing the
gold, the former for washing it; the former may also be poured over the
ingredients from which the _aqua valens_ is made.

The _aqua_ that was first distilled, which contains the silver, is
poured into an ampulla wide at the base, the top of which is also
smeared with lute and covered by an operculum, and is then boiled as
before in order that it may be separated from the silver. If there be so
much _aqua_ that (when boiled) it rises into the operculum, there is
put into the ampulla one lozenge or two; these are made of soap, cut
into small pieces and mixed together with powdered argol, and then
heated in a pot over a gentle fire; or else the contents are stirred
with a hazel twig split at the bottom, and in both cases the _aqua_
effervesces, and soon after again settles. When the powerful vapour
appears, the _aqua_ gives off a kind of oil, and the operculum becomes
red. But, lest the vapours should escape from the ampulla and the
operculum in that part where their mouths communicate, they are entirely
sealed all round. The _aqua_ is boiled continually over a fiercer fire,
and enough charcoal must be put into the furnace so that the live coals
touch the vessel. The ampulla is taken out as soon as all the _aqua_ has
been distilled, and the silver, which is dried by the heat of the fire,
alone remains in it; the silver is shaken out and put in an earthenware
crucible, and heated until it melts. The molten glass is extracted with
an iron rod curved at the lower end, and the silver is made into cakes.
The glass extracted from the crucible is ground to powder, and to this
are added litharge, argol, glass-galls, and saltpetre, and they are
melted in an earthen crucible. The button that settles is transferred to
the cupel and re-melted.

If the silver was not sufficiently dried by the heat of the fire, that
which is contained in the upper part of the ampulla will appear black;
this when melted will be consumed. When the lute, which was smeared
round the lower part of the ampulla, has been removed, it is placed in
the crucible and is re-melted, until at last there is no more appearance
of black[13].

If to the first _aqua_ the other which contains silver is to be added,
it must be poured in before the powerful vapours appear, and the _aqua_
gives off the oily substance, and the operculum becomes red; for he who
pours in the _aqua_ after the vapour appears causes a loss, because the
_aqua_ generally spurts out and the glass breaks. If the ampulla breaks
when the gold is being parted from the silver or the silver from the
_aqua_, the _aqua_ will be absorbed by the sand or the lute or the
bricks, whereupon, without any delay, the red hot coals should be taken
out of the furnace and the fire extinguished. The sand and bricks after
being crushed should be thrown into a copper vessel, warm water should
be poured over them, and they should be put aside for the space of
twelve hours; afterward the water should be strained through a canvas,
and the canvas, since it contains silver, should be dried by the heat of
the sun or the fire, and then placed in an earthen crucible and heated
until the silver melts, this being poured out into an iron mould. The
strained water should be poured into an ampulla and separated from the
silver, of which it contains a minute portion; the sand should be mixed
with litharge, glass-galls, argol, saltpetre, and salt, and heated in an
earthen crucible. The button which settles at the bottom should be
transferred to a cupel, and should be re-melted, in order that the lead
may be separated from the silver. The lute, with lead added, should be
heated in an earthen crucible, then re-melted in a cupel.

We also separate silver from gold by the same method when we assay them.
For this purpose the alloy is first rubbed against a touchstone, in
order to learn what proportion of silver there is in it; then as much
silver as is necessary is added to the argentiferous gold, in a _bes_ of
which there must be less than a _semi-uncia_ or a _semi-uncia_ and a
_sicilicus_[14] of copper. After lead has been added, it is melted in a
cupel until the lead and the copper have exhaled, then the alloy of gold
with silver is flattened out, and little tubes are made of the leaves;
these are put into a glass ampulla, and strong _aqua_ is poured over
them two or three times. The tubes after this are absolutely pure, with
the exception of only a quarter of a _siliqua_, which is silver; for
only this much silver remains in eight _unciae_ of gold[15].

As great expense is incurred in parting the metals by the methods that
I have explained, as night vigils are necessary when _aqua valens_ is
made, and as generally much labour and great pains have to be expended
on this matter, other methods for parting have been invented by clever
men, which are less costly, less laborious, and in which there is less
loss if through carelessness an error is made. There are three methods,
the first performed with sulphur, the second with antimony, the third by
means of some compound which consists of these or other ingredients.

[Illustration 449 (Parting precious metals with sulphur): A--Pot.
B--Circular fire. C--Crucibles. D--Their lids. E--Lid of the pot.
F--Furnace. G--Iron rod.]

In the first method,[16] the silver containing some gold is melted in a
crucible and made into granules. For every _libra_ of granules, there is
taken a sixth of a _libra_ and a _sicilicus_ of sulphur (not exposed to
the fire); this, when crushed, is sprinkled over the moistened granules,
and then they are put into a new earthen pot of the capacity of four
_sextarii_, or into several of them if there is an abundance of
granules. The pot, having been filled, is covered with an earthen lid
and smeared over, and placed within a circle of fire set one and a half
feet distant from the pot on all sides, in order that the sulphur added
to the silver should not be distilled when melted. The pot is opened,
the black-coloured granules are taken out, and afterward thirty-three
_librae_ of these granules are placed in an earthen crucible, if it has
such capacity. For every _libra_ of silver granules, weighed before they
were sprinkled with sulphur, there is weighed out also a sixth of a
_libra_ and a _sicilicus_ of copper, if each _libra_ consists either of
three-quarters of a _libra_ of silver and a quarter of a _libra_ of
copper, or of three-quarters of a _libra_ and a _semi-uncia_ of silver
and a sixth of a _libra_ and a _semi-uncia_ of copper. If, however, the
silver contains five-sixths of a _libra_ of silver and a sixth of a
_libra_ of copper, or five-sixths of a _libra_ and a _semi-uncia_ of
silver and an _uncia_ and a half of copper, then there are weighed out a
quarter of a _libra_ of copper granules. If a _libra_ contains
eleven-twelfths of a _libra_ of silver and one _uncia_ of copper, or
eleven-twelfths and a _semi-uncia_ of silver and a _semi-uncia_ of
copper, then are weighed out a quarter of a _libra_ and a _semi-uncia_
and a _sicilicus_ of copper granules. Lastly, if there is only pure
silver, then as much as a third of a _libra_ and a _semi-uncia_ of
copper granules are added. Half of these copper granules are added soon
afterward to the black-coloured silver granules. The crucible should be
tightly covered and smeared over with lute, and placed in a furnace,
into which the air is drawn through the draught-holes. As soon as the
silver is melted, the crucible is opened, and there is placed in it a
heaped ladleful more of granulated copper, and also a heaped ladleful of
a powder which consists of equal parts of litharge, of granulated lead,
of salt, and of glass-galls; then the crucible is again covered with the
lid. When the copper granules are melted, more are put in, together with
the powder, until all have been put in.

A little of the regulus is taken from the crucible, but not from the
gold lump which has settled at the bottom, and a _drachma_ of it is put
into each of the cupels, which contain an _uncia_ of molten lead; there
should be many of these cupels. In this way half a _drachma_ of silver
is made. As soon as the lead and copper have been separated from the
silver, a third of it is thrown into a glass ampulla, and _aqua valens_
is poured over it. By this method is shown whether the sulphur has
parted all the gold from the silver, or not. If one wishes to know the
size of the gold lump which has settled at the bottom of the crucible,
an iron rod moistened with water is covered with chalk, and when the rod
is dry it is pushed down straight into the crucible, and the rod remains
bright to the height of the gold lump; the remaining part of the rod is
coloured black by the regulus, which adheres to the rod if it is not
quickly removed.

If when the rod has been extracted the gold is observed to be
satisfactorily parted from the silver, the regulus is poured out, the
gold button is taken out of the crucible, and in some clean place the
regulus is chipped off from it, although it usually flies apart. The
lump itself is reduced to granules, and for every _libra_ of this gold
they weigh out a quarter of a _libra_ each of crushed sulphur and of
granular copper, and all are placed together in an earthen crucible, not
into a pot. When they are melted, in order that the gold may more
quickly settle at the bottom, the powder which I have mentioned is
added.

Although minute particles of gold appear to scintillate in the regulus
of copper and silver, yet if all that are in a _libra_ do not weigh as
much as a single sesterce, then the sulphur has satisfactorily parted
the gold from the silver; but if it should weigh a sesterce or more,
then the regulus is thrown back again into the earthen crucible, and it
is not advantageous to add sulphur, but only a little copper and powder,
by which method a gold lump is again made to settle at the bottom; and
this one is added to the other button which is not rich in gold.

When gold is parted from sixty-six _librae_ of silver, the silver,
copper, and sulphur regulus weighs one hundred and thirty-two _librae_.
To separate the copper from the silver we require five hundred _librae_
of lead, more or less, with which the regulus is melted in the second
furnace. In this manner litharge and hearth-lead are made, which are
re-smelted in the first furnace. The cakes that are made from these are
placed in the third furnace, so that the lead may be separated from the
copper and used again, for it contains very little silver. The crucibles
and their covers are crushed, washed, and the sediment is melted
together with litharge and hearth-lead.

Those who wish to separate all the silver from the gold by this method
leave one part of gold to three of silver, and then reduce the alloy to
granules. Then they place it in an ampulla, and by pouring _aqua valens_
over it, part the gold from the silver, which process I explained in
Book VII.

If sulphur from the lye with which _sal artificiosus_ is made, is strong
enough to float an egg thrown into it, and is boiled until it no longer
emits fumes, and melts when placed upon glowing coals, then, if such
sulphur is thrown into the melted silver, it parts the gold from it.

[Illustration 453 (Parting precious metals with antimony): A--Furnace in
which the air is drawn in through holes. B--Goldsmith's forge.
C--Earthen crucibles. D--Iron pots. E--Block.]

Silver is also parted from gold by means of _stibium_[17]. If in a _bes
of_ gold there are seven, or six, or five double _sextulae_ of silver,
then three parts of _stibium_ are added to one part of gold; but in
order that the _stibium_ should not consume the gold, it is melted with
copper in a red hot earthen crucible. If the gold contains some portion
of copper, then to eight _unciae_ of _stibium_ a _sicilicus_ of copper
is added; and if it contains no copper, then half an _uncia_, because
copper must be added to _stibium_ in order to part gold from silver. The
gold is first placed in a red hot earthen crucible, and when melted it
swells, and a little _stibium_ is added to it lest it run over; in a
short space of time, when this has melted, it likewise again swells, and
when this occurs it is advisable to put in all the remainder of the
_stibium_, and to cover the crucible with a lid, and then to heat the
mixture for the time required to walk thirty-five paces. Then it is at
once poured out into an iron pot, wide at the top and narrow at the
bottom, which was first heated and smeared over with tallow or wax, and
set on an iron or wooden block. It is shaken violently, and by this
agitation the gold lump settles to the bottom, and when the pot has
cooled it is tapped loose, and is again melted four times in the same
way. But each time a less weight of _stibium_ is added to the gold,
until finally only twice as much _stibium_ is added as there is gold, or
a little more; then the gold lump is melted in a cupel. The _stibium_ is
melted again three or four times in an earthen crucible, and each time a
gold lump settles, so that there are three or four gold lumps, and these
are all melted together in a cupel.

To two _librae_ and a half of such _stibium_ are added two _librae_ of
argol and one _libra_ of glass-galls, and they are melted in an earthen
crucible, where a lump likewise settles at the bottom; this lump is
melted in the cupel. Finally, the _stibium_ with a little lead added, is
melted in the cupel, in which, after all the rest has been consumed by
the fire, the silver alone remains. If the _stibium_ is not first melted
in an earthen crucible with argol and glass-galls, before it is melted
in the cupel, part of the silver is consumed, and is absorbed by the ash
and powder of which the cupel is made.

The crucible in which the gold and silver alloy are melted with
_stibium_, and also the cupel, are placed in a furnace, which is usually
of the kind in which the air is drawn in through holes; or else they
are placed in a goldsmith's forge.

Just as _aqua valens_ poured over silver, from which the sulphur has
parted the gold, shows us whether all has been separated or whether
particles of gold remain in the silver; so do certain ingredients, if
placed in the pot or crucible "alternately" with the gold, from which
the silver has been parted by _stibium_, and heated, show us whether all
have been separated or not.

We use cements[18] when, without _stibium_, we part silver or copper or
both so ingeniously and admirably from gold. There are various cements.
Some consist of half a _libra_ of brick dust, a quarter of a _libra_ of
salt, an _uncia_ of saltpetre, half an _uncia_ of sal-ammoniac, and half
an _uncia_ of rock salt. The bricks or tiles from which the dust is made
must be composed of fatty clays, free from sand, grit, and small stones,
and must be moderately burnt and very old.

Another cement is made of a _bes_ of brick dust, a third of rock salt,
an _uncia_ of saltpetre, and half an _uncia_ of refined salt. Another
cement is made of a _bes_ of brick dust, a quarter of refined salt, one
and a half _unciae_ of saltpetre, an _uncia_ of sal-ammoniac, and half
an _uncia_ of rock salt. Another has one _libra_ of brick dust, and half
a _libra_ of rock salt, to which some add a sixth of a _libra_ and a
_sicilicus_ of vitriol. Another is made of half a _libra_ of brick dust,
a third of a _libra_ of rock salt, an _uncia_ and a half of vitriol, and
one _uncia_ of saltpetre. Another consists of a _bes_ of brick dust, a
third of refined salt, a sixth of white vitriol[19], half an _uncia_ of
verdigris, and likewise half an _uncia_ of saltpetre. Another is made of
one and a third _librae_ of brick dust, a _bes_ of rock salt, a sixth of
a _libra_ and half an _uncia_ of sal-ammoniac, a sixth and half an
_uncia_ of vitriol, and a sixth of saltpetre. Another contains a _libra_
of brick dust, a third of refined salt, and one and a half _unciae_ of
vitriol.

Those ingredients above are peculiar to each cement, but what follows
is common to all. Each of the ingredients is first separately crushed to
powder; the bricks are placed on a hard rock or marble, and crushed with
an iron implement; the other things are crushed in a mortar with a
pestle; each is separately passed through a sieve. Then they are all
mixed together, and are moistened with vinegar in which a little
sal-ammoniac has been dissolved, if the cement does not contain any. But
some workers, however, prefer to moisten the gold granules or gold-leaf
instead.

The cement should be placed, alternately with the gold, in new and clean
pots in which no water has ever been poured. In the bottom the cement is
levelled with an iron implement, and afterward the gold granules or
leaves are placed one against the other, so that they may touch it on
all sides; then, again, a handful of the cement, or more if the pots are
large, is thrown in and levelled with an iron implement; the granules
and leaves are laid over this in the same manner, and this is repeated
until the pot is filled. Then it is covered with a lid, and the place
where they join is smeared over with artificial lute, and when this is
dry the pots are placed in the furnace.

[Illustration 455 (Parting precious metals by cementation): A--Furnace.
B--Pot. C--Lid. D--Air-holes.]

The furnace has three chambers, the lowest of which is a foot high; into
this lowest chamber the air penetrates through an opening, and into it
the ashes fall from the burnt wood, which is supported by iron rods,
arranged to form a grating. The middle chamber is two feet high, and the
wood is pushed in through its mouth. The wood ought to be oak, holmoak,
or turkey-oak, for from these the slow and lasting fire is made which is
necessary for this operation. The upper chamber is open at the top so
that the pots, for which it has the depth, may be put into it; the floor
of this chamber consists of iron rods, so strong that they may bear the
weight of the pots and the heat of the fire; they are sufficiently far
apart that the fire may penetrate well and may heat the pots. The pots
are narrow at the bottom, so that the fire entering into the space
between them may heat them; at the top the pots are wide, so that they
may touch and hold back the heat of the fire. The upper part of the
furnace is closed in with bricks not very thick, or with tiles and lute,
and two or three air-holes are left, through which the fumes and flames
may escape.

The gold granules or leaves and the cement, alternately placed in the
pots, are heated by a gentle fire, gradually increasing for twenty-four
hours, if the furnace was heated for two hours before the full pots were
stood in it, and if this was not done, then for twenty-six hours. The
fire should be increased in such a manner that the pieces of gold and
the cement, in which is the potency to separate the silver and copper
from the gold, may not melt, for in this case the labour and cost will
be spent in vain; therefore, it is ample to have the fire hot enough
that the pots always remain red. After so many hours all the burning
wood should be drawn out of the furnace. Then the refractory bricks or
tiles are removed from the top of the furnace, and the glowing pots are
taken out with the tongs. The lids are removed, and if there is time it
is well to allow the gold to cool by itself, for then there is less
loss; but if time cannot be spared for that operation, the pieces of
gold are immediately placed separately into a wooden or bronze vessel of
water and gradually quenched, lest the cement which absorbs the silver
should exhale it. The pieces of gold, and the cement adhering to them,
when cooled or quenched, are rolled with a little mallet so as to crush
the lumps and free the gold from the cement. Then they are sifted by a
fine sieve, which is placed over a bronze vessel; in this manner the
cement containing the silver or the copper or both, falls from the sieve
into the bronze vessel, and the gold granules or leaves remain on it.
The gold is placed in a vessel and again rolled with the little mallet,
so that it may be cleansed from the cement which absorbs silver and
copper.

The particles of cement, which have dropped through the holes of the
sieve into the bronze vessel, are washed in a bowl, over a wooden tub,
being shaken about with the hands, so that the minute particles of gold
which have fallen through the sieve may be separated. These are again
washed in a little vessel, with warm water, and scrubbed with a piece of
wood or a twig broom, that the moistened cement may be detached.
Afterward all the gold is again washed with warm water, and collected
with a bristle brush, and should be washed in a copper full of holes,
under which is placed a little vessel. Then it is necessary to put the
gold on an iron plate, under which is a vessel, and to wash it with
warm water. Finally, it is placed in a bowl, and, when dry, the granules
or leaves are rubbed against a touchstone at the same time as a
touch-needle, and considered carefully as to whether they be pure or
alloyed. If they are not pure enough, the granules or the leaves,
together with the cement which attracts silver and copper, are arranged
alternately in layers in the same manner, and again heated; this is done
as often as is necessary, but the last time it is heated as many hours
as are required to cleanse the gold.

Some people add another cement to the granules or leaves. This cement
lacks the ingredients of metalliferous origin, such as verdigris and
vitriol, for if these are in the cement, the gold usually takes up a
little of the base metal; or if it does not do this, it is stained by
them. For this reason some very rightly never make use of cements
containing these things, because brick dust and salt alone, especially
rock salt, are able to extract all the silver and copper from the gold
and to attract it to themselves.

It is not necessary for coiners to make absolutely pure gold, but to
heat it only until such a fineness is obtained as is needed for the gold
money which they are coining.

The gold is heated, and when it shows the necessary golden yellow colour
and is wholly pure, it is melted and made into bars, in which case they
are either prepared by the coiners with _chrysocolla_, which is called
by the Moors borax, or are prepared with salt of lye made from the ashes
of ivy or of other salty herbs.

The cement which has absorbed silver or copper, after water has been
poured over it, is dried and crushed, and when mixed with hearth-lead
and de-silverized lead, is smelted in the blast furnace. The alloy of
silver and lead, or of silver and copper and lead, which flows out, is
again melted in the cupellation furnace, in order that the lead and
copper may be separated from the silver. The silver is finally
thoroughly purified in the refining furnace, and in this practical
manner there is no silver lost, or only a minute quantity.

There are besides this, certain other cements[20] which part gold from
silver, composed of sulphur, _stibium_ and other ingredients. One of
these compounds consists of half an _uncia_ of vitriol dried by the heat
of the fire and reduced to powder, a sixth of refined salt, a third of
_stibium_, half a _libra_ of prepared sulphur (not exposed to the
fire), one _sicilicus_ of glass, likewise one _sicilicus_ of saltpetre,
and a _drachma_ of sal-ammoniac.[21] The sulphur is prepared as follows:
it is first crushed to powder, then it is heated for six hours in sharp
vinegar, and finally poured into a vessel and washed with warm water;
then that which settles at the bottom of the vessel is dried. To refine
the salt it is placed in river water and boiled, and again evaporated.
The second compound contains one _libra_ of sulphur (not exposed to
fire) and two _librae_ of refined salt. The third compound is made from
one _libra_ of sulphur (not exposed to the fire), half a _libra_ of
refined salt, a quarter of a _libra_ of sal-ammoniac, and one _uncia_ of
red-lead. The fourth compound consists of one _libra_ each of refined
salt, sulphur (not exposed to the fire) and argol, and half a _libra_ of
_chrysocolla_ which the Moors call borax. The fifth compound has equal
proportions of sulphur (not exposed to the fire), sal-ammoniac,
saltpetre, and verdigris.

The silver which contains some portion of gold is first melted with lead
in an earthen crucible, and they are heated together until the silver
exhales the lead. If there was a _libra_ of silver, there must be six
_drachmae_ of lead. Then the silver is sprinkled with two _unciae_ of
that powdered compound and is stirred; afterward it is poured into
another crucible, first warmed and lined with tallow, and then violently
shaken. The rest is performed according to the process I have already
explained.

Gold may be parted without injury from silver goblets and from other
gilt vessels and articles[22], by means of a powder, which consists of
one part of sal-ammoniac and half a part of sulphur. The gilt goblet or
other article is smeared with oil, and the powder is dusted on; the
article is seized in the hand, or with tongs, and is carried to the fire
and sharply tapped, and by this means the gold falls into water in
vessels placed underneath, while the goblet remains uninjured.

Gold is also parted from silver on gilt articles by means of
quicksilver. This is poured into an earthen crucible, and so warmed by
the fire that the finger can bear the heat when dipped into it; the
silver-gilt objects are placed in it, and when the quicksilver adheres
to them they are taken out and placed on a dish, into which, when
cooled, the gold falls, together with the quicksilver. Again and
frequently the same silver-gilt object is placed in heated quicksilver,
and the same process is continued until at last no more gold is visible
on the object; then the object is placed in the fire, and the
quicksilver which adheres to it is exhaled. Then the artificer takes a
hare's foot, and brushes up into a dish the quicksilver and the gold
which have fallen together from the silver article, and puts them into
a cloth made of woven cotton or into a soft leather; the quicksilver is
squeezed through one or the other into another dish.[23] The gold
remains in the cloth or the leather, and when collected is placed in a
piece of charcoal hollowed out, and is heated until it melts, and a
little button is made from it. This button is heated with a little
_stibium_ in an earthen crucible and poured out into another little
vessel, by which method the gold settles at the bottom, and the
_stibium_ is seen to be on the top; then the work is completed. Finally,
the gold button is put in a hollowed-out brick and placed in the fire,
and by this method the gold is made pure. By means of the above methods
gold is parted from silver and also silver from gold.

Now I will explain the methods used to separate copper from gold[24].
The salt which we call _sal-artificiosus_,[25] is made from a _libra_
each of vitriol, alum, saltpetre, and sulphur not exposed to the fire,
and half a _libra_ of sal-ammoniac; these ingredients when crushed are
heated with one part of lye made from the ashes used by wool dyers, one
part of unslaked lime, and four parts of beech ashes. The ingredients
are boiled in the lye until the whole has been dissolved. Then it is
immediately dried and kept in a hot place, lest it turn into oil; and
afterward when crushed, a _libra_ of lead-ash is mixed with it. With
each _libra_ of this powdered compound one and a half _unciae_ of the
copper is gradually sprinkled into a hot crucible, and it is stirred
rapidly and frequently with an iron rod. When the crucible has cooled
and been broken up, the button of gold is found.

The second method for parting is the following. Two _librae_ of sulphur
not exposed to the fire, and four _librae_ of refined salt are crushed
and mixed; a sixth of a _libra_ and half an _uncia_ of this powder is
added to a _bes_ of granules made of lead, and twice as much copper
containing gold; they are heated together in an earthen crucible until
they melt. When cooled, the button is taken out and purged of slag. From
this button they again make granules, to a third of a _libra_ of which
is added half a _libra_ of that powder of which I have spoken, and they
are placed in alternate layers in the crucible; it is well to cover the
crucible and to seal it up, and afterward it is heated over a gentle
fire until the granules melt. Soon afterward, the crucible is taken off
the fire, and when it is cool the button is extracted. From this, when
purified and again melted down, the third granules are made, to which,
if they weigh a sixth of a _libra_, is added one half an _uncia_ and a
_sicilicus_ of the powder, and they are heated in the same manner, and
the button of gold settles at the bottom of the crucible.

The third method is as follows. From time to time small pieces of
sulphur, enveloped in or mixed with wax, are dropped into six _librae_
of the molten copper, and consumed; the sulphur weighs half an _uncia_
and a _sicilicus_. Then one and a half _sicilici_ of powdered saltpetre
are dropped into the same copper and likewise consumed; then again half
an _uncia_ and a _sicilicus_ of sulphur enveloped in wax; afterward one
and a half _sicilici_ of lead-ash enveloped in wax, or of minium made
from red-lead. Then immediately the copper is taken out, and to the gold
button, which is now mixed with only a little copper, they add _stibium_
to double the amount of the button; these are heated together until the
_stibium_ is driven off; then the button, together with lead of half the
weight of the button, are heated in a cupel. Finally, the gold is taken
out of this and quenched, and if there is a blackish colour settled in
it, it is melted with a little of the _chrysocolla_ which the Moors call
borax; if too pale, it is melted with _stibium_, and acquires its own
golden-yellow colour. There are some who take out the molten copper with
an iron ladle and pour it into another crucible, whose aperture is
sealed up with lute, and they place it over glowing charcoal, and when
they have thrown in the powders of which I have spoken, they stir the
whole mass rapidly with an iron rod, and thus separate the gold from the
copper; the former settles at the bottom of the crucible, the latter
floats on the top. Then the aperture of the crucible is opened with the
red-hot tongs, and the copper runs out. The gold which remains is
re-heated with _stibium_, and when this is exhaled the gold is heated
for the third time in a cupel with a fourth part of lead, and then
quenched.

The fourth method is to melt one and a third _librae_ of the copper with
a sixth of a _libra_ of lead, and to pour it into another crucible
smeared on the inside with tallow or gypsum; and to this is added a
powder consisting of half an _uncia_ each of prepared sulphur,
verdigris, and saltpetre, and an _uncia_ and a half of _sal coctus_. The
fifth method consists of placing in a crucible one _libra_ of the copper
and two _librae_ of granulated lead, with one and a half _unciae_ of
_sal-artificiosus_; they are at first heated over a gentle fire and then
over a fiercer one. The sixth method consists in heating together a
_bes_ of the copper and one-sixth of a _libra_ each of sulphur, salt,
and _stibium_. The seventh method consists of heating together a _bes_
of the copper and one-sixth each of iron scales and filings, salt,
_stibium_, and glass-galls. The eighth method consists of heating
together one _libra_ of the copper, one and a half _librae_ of sulphur,
half a _libra_ of verdigris, and a _libra_ of refined salt. The ninth
method consists of placing in one _libra_ of the molten copper as much
pounded sulphur, not exposed to the fire, and of stirring it rapidly
with an iron rod; the lump is ground to powder, into which quicksilver
is poured, and this attracts to itself the gold.

Gilded copper articles are moistened with water and placed on the fire,
and when they are glowing they are quenched with cold water, and the
gold is scraped off with a brass rod. By these practical methods gold is
separated from copper.

Either copper or lead is separated from silver by the methods which I
will now explain.[26] This is carried on in a building near by the
works, or in the works in which the gold or silver ores or alloys are
smelted. The middle wall of such a building is twenty-one feet long and
fifteen feet high, and from this a front wall is distant fifteen feet
toward the river; the rear wall is nineteen feet distant, and both
these walls are thirty-six feet long and fourteen feet high; a
transverse wall extends from the end of the front wall to the end of the
rear wall; then fifteen feet back a second transverse wall is built out
from the front wall to the end of the middle wall. In that space which
is between those two transverse walls are set up the stamps, by means of
which the ores and the necessary ingredients for smelting are broken up.
From the further end of the front wall, a third transverse wall leads to
the other end of the middle wall, and from the same to the end of the
rear wall. The space between the second and third transverse walls, and
between the rear and middle long walls, contains the cupellation
furnace, in which lead is separated from gold or silver. The vertical
wall of its chimney is erected upon the middle wall, and the sloping
chimney-wall rests on the beams which extend from the second transverse
wall to the third; these are so located that they are at a distance of
thirteen feet from the middle long wall and four from the rear wall, and
they are two feet wide and thick. From the ground up to the roof-beams
is twelve feet, and lest the sloping chimney-wall should fall down, it
is partly supported by means of many iron rods, and partly by means of a
few tie-beams covered with lute, which extend from the small beams of
the sloping chimney-wall to the beams of the vertical chimney-wall. The
rear roof is arranged in the same way as the roof of the works in which
ore is smelted. In the space between the middle and the front long walls
and between the second[27] and the third transverse walls are the
bellows, the machinery for depressing and the instrument for raising
them. A drum on the axle of a water-wheel has rundles which turn the
toothed drum of an axle, whose long cams depress the levers of the
bellows, and also another toothed drum on an axle, whose cams raise the
tappets of the stamps, but in the opposite direction. So that if the
cams which depress the levers of the bellows turn from north to south,
the cams of the stamps turn from south to north.

[Illustration 468 (Cupellation Furnace): A--Rectangular stones.
B--Sole-stone. C--Air-holes. D--Internal walls. E--Dome. F--Crucible.
G--Bands. H--Bars. I--Apertures in the dome. K--Lid of the dome.
L--Rings. M--Pipes. N--Valves. O--Chains.]

Lead is separated from gold or silver in a cupellation furnace, of which
the structure consists of rectangular stones, of two interior walls of
which the one intersects the other transversely, of a round sole, and of
a dome. Its crucible is made from powder of earth and ash; but I will
first speak of the structure and also of the rectangular stones. A
circular wall is built four feet and three palms high, and one foot
thick; from the height of two feet and three palms from the bottom, the
upper part of the interior is cut away to the width of one palm, so that
the stone sole may rest upon it. There are usually as many as fourteen
stones; on the outside they are a foot and a palm wide, and on the
inside narrower, because the inner circle is much smaller than the
outer; if the stones are wider, fewer are required, if narrower more;
they are sunk into the earth to a depth of a foot and a palm. At the top
each one is joined to the next by an iron staple, the points of which
are embedded in holes, and into each hole is poured molten lead. This
stone structure has six air-holes near the ground, at a height of a foot
above the ground; they are two feet and a palm from the bottom of the
stones; each of these air-holes is in two stones, and is two palms high,
and a palm and three digits wide. One of them is on the right side,
between the wall which protects the main wall from the fire, and the
channel through which the litharge flows out of the furnace crucible;
the other five air-holes are distributed all round at equal distances
apart; through these escapes the moisture which the earth exhales when
heated, and if it were not for these openings the crucible would absorb
the moisture and be damaged. In such a case a lump would be raised, like
that which a mole throws up from the earth, and the ash would float on
the top, and the crucible would absorb the silver-lead alloy; there are
some who, because of this, make the rear part of the structure entirely
open. The two inner walls, of which one intersects the other, are built
of bricks, and are a brick in thickness. There are four air-holes in
these, one in each part, which are about one digit's breadth higher and
wider than the others. Into the four compartments is thrown a
wheelbarrowful of slag, and over this is placed a large wicker basket
full of charcoal dust. These walls extend a cubit above the ground, and
on these, and on the ledge cut in the rectangular stones, is placed the
stone sole; this sole is a palm and three digits thick, and on all sides
touches the rectangular stones; if there are any cracks in it they are
filled up with fragments of stone or brick. The front part of the sole
is sloped so that a channel can be made, through which the litharge
flows out. Copper plates are placed on this part of the sole-stone so
that the silver-lead or other alloy may be more rapidly heated.

A dome which has the shape of half a sphere covers the crucible. It
consists of iron bands and of bars and of a lid. There are three bands,
each about a palm wide and a digit thick; the lowest is at a distance of
one foot from the middle one, and the middle one a distance of two feet
from the upper one. Under them are eighteen iron bars fixed by iron
rivets; these bars are of the same width and thickness as the bands, and
they are of such a length, that curving, they reach from the lower band
to the upper, that is two feet and three palms long, while the dome is
only one foot and three palms high. All the bars and bands of the dome
have iron plates fastened on the underside with iron wire. In addition,
the dome has four apertures; the rear one, which is situated opposite
the channel through which the litharge flows out, is two feet wide at
the bottom; toward the top, since it slopes gently, it is narrower,
being a foot, three palms, and a digit wide; there is no bar at this
place, for the aperture extends from the upper band to the middle one,
but not to the lower one. The second aperture is situated above the
channel, is two and a half feet wide at the bottom, and two feet and a
palm at the top; and there is likewise no bar at this point; indeed, not
only does the bar not extend to the lower band, but the lower band
itself does not extend over this part, in order that the master can draw
the litharge out of the crucible. There are besides, in the wall which
protects the principal wall against the heat, near where the nozzles of
the bellows are situated, two apertures, three palms wide and about a
foot high, in the middle of which two rods descend, fastened on the
inside with plates. Near these apertures are placed the nozzles of the
bellows, and through the apertures extend the pipes in which the nozzles
of the bellows are set. These pipes are made of iron plates rolled up;
they are two palms three digits long, and their inside diameter is three
and a half digits; into these two pipes the nozzles of the bellows
penetrate a distance of three digits from their valves. The lid of the
dome consists of an iron band at the bottom, two digits wide, and of
three curved iron bars, which extend from one point on the band to the
point opposite; they cross each other at the top, where they are fixed
by means of iron rivets. On the under side of the bars there are
likewise plates fastened by rivets; each of the plates has small holes
the size of a finger, so that the lute will adhere when the interior is
lined. The dome has three iron rings engaged in wide holes in the heads
of iron claves, which fasten the bars to the middle band at these
points. Into these rings are fastened the hooks of the chains with which
the dome is raised, when the master is preparing the crucible.

On the sole and the copper plates and the rock of the furnace, lute
mixed with straw is placed to a depth of three digits, and it is pounded
with a wooden rammer until it is compressed to a depth of one digit
only. The rammer-head is round and three palms high, two palms wide at
the bottom, and tapering upward; its handle is three feet long, and
where it is set into the rammer-head it is bound around with an iron
band. The top of the stonework in which the dome rests is also covered
with lute, likewise mixed with straw, to the thickness of a palm. All
this, as soon as it becomes loosened, must be repaired.

[Illustration 470 (Cupellation Furnace): A--An artificer tamping the
crucible with a rammer. B--Large rammer. C--Broom. D--Two smaller
rammers. E--Curved iron plates. F--Part of a wooden strip. G--Sieve.
H--Ashes. I--Iron shovel. K--Iron plate. L--block of wood. M--Rock.
N--Basket made of woven twigs. O--Hooked bar. P--Second hooked bar.
Q--Old linen rag. R--bucket. S--Doeskin. T--Bundles of straw. V--Wood.
X--Cakes of lead alloy. Y--Fork. Z--Another workman covers the outside
of the furnace with lute where the dome fits on it. AA--Basket full of
ashes. BB--Lid of the dome. CC--The assistant standing on the steps
pours charcoal into the crucible through the hole at the top of the
dome. DD--Iron implement with which the lute is beaten. EE--Lute.
FF--Ladle with which the workman or master takes a sample. GG--Rabble
with which the scum of impure lead is drawn off. HH--Iron wedge with
which the silver mass is raised.]

The artificer who undertakes the work of parting the metals, distributes
the operation into two shifts of two days. On the one morning he
sprinkles a little ash into the lute, and when he has poured some water
over it he brushes it over with a broom. Then he throws in sifted ashes
and dampens them with water, so that they could be moulded into balls
like snow. The ashes are those from which lye has been made by letting
water percolate through them, for other ashes which are fatty would have
to be burnt again in order to make them less fat. When he has made the
ashes smooth by pressing them with his hands, he makes the crucible
slope down toward the middle; then he tamps it, as I have described,
with a rammer. He afterward, with two small wooden rammers, one held in
each hand, forms the channel through which the litharge flows out. The
heads of these small rammers are each a palm wide, two digits thick, and
one foot high; the handle of each is somewhat rounded, is a digit and a
half less in diameter than the rammer-head, and is three feet in
length; the rammer-head as well as the handle is made of one piece of
wood. Then with shoes on, he descends into the crucible and stamps it in
every direction with his feet, in which manner it is packed and made
sloping. Then he again tamps it with a large rammer, and removing his
shoe from his right foot he draws a circle around the crucible with it,
and cuts out the circle thus drawn with an iron plate. This plate is
curved at both ends, is three palms long, as many digits wide, and has
wooden handles a palm and two digits long, and two digits thick; the
iron plate is curved back at the top and ends, which penetrate into
handles. There are some who use in the place of the plate a strip of
wood, like the rim of a sieve; this is three digits wide, and is cut out
at both ends that it may be held in the hands. Afterward he tamps the
channel through which the litharge discharges. Lest the ashes should
fall out, he blocks up the aperture with a stone shaped to fit it,
against which he places a board, and lest this fall, he props it with a
stick. Then he pours in a basketful of ashes and tamps them with the
large rammer; then again and again he pours in ashes and tamps them with
the rammer. When the channel has been made, he throws dry ashes all over
the crucible with a sieve, and smooths and rubs it with his hands. Then
he throws three basketsful of damp ashes on the margin all round the
edge of the crucible, and lets down the dome. Soon after, climbing upon
the crucible, he builds up ashes all around it, lest the molten alloy
should flow out. Then, having raised the lid of the dome, he throws a
basketful of charcoal into the crucible, together with an iron shovelful
of glowing coals, and he also throws some of the latter through the
apertures in the sides of the dome, and he spreads them with the same
shovel. This work and labour is finished in the space of two hours.

An iron plate is set in the ground under the channel, and upon this is
placed a wooden block, three feet and a palm long, a foot and two palms
and as many digits wide at the back, and two palms and as many digits
wide in front; on the block of wood is placed a stone, and over it an
iron plate similar to the bottom one, and upon this he puts a basketful
of charcoal, and also an iron shovelful of burning charcoals. The
crucible is heated in an hour, and then, with the hooked bar with which
the litharge is drawn off, he stirs the remainder of the charcoal about.
This hook is a palm long and three digits wide, has the form of a double
triangle, and has an iron handle four feet long, into which is set a
wooden one six feet long. There are some who use instead a simple hooked
bar. After about an hour's time, he stirs the charcoal again with the
bar, and with the shovel throws into the crucible the burning charcoals
lying in the channel; then again, after the space of an hour, he stirs
the burning charcoals with the same bar. If he did not thus stir them
about, some blackness would remain in the crucible and that part would
be damaged, because it would not be sufficiently dried. Therefore the
assistant stirs and turns the burning charcoal that it may be entirely
burnt up, and so that the crucible may be well heated, which takes three
hours; then the crucible is left quiet for the remaining two hours.

When the hour of eleven has struck, he sweeps up the charcoal ashes
with a broom and throws them out of the crucible. Then he climbs on to
the dome, and passing his hand in through its opening, and dipping an
old linen rag in a bucket of water mixed with ashes, he moistens the
whole of the crucible and sweeps it. In this way he uses two bucketsful
of the mixture, each holding five Roman _sextarii_,[28] and he does this
lest the crucible, when the metals are being parted, should break open;
after this he rubs the crucible with a doe skin, and fills in the
cracks. Then he places at the left side of the channel, two fragments of
hearth-lead, laid one on the top of the other, so that when partly
melted they remain fixed and form an obstacle, that the litharge will
not be blown about by the wind from the bellows, but remain in its
place. It is expedient, however, to use a brick in the place of the
hearth-lead, for as this gets much hotter, therefore it causes the
litharge to form more rapidly. The crucible in its middle part is made
two palms and as many digits deeper.[29]

There are some who having thus prepared the crucible, smear it over with
incense[30], ground to powder and dissolved in white of egg, soaking it
up in a sponge and then squeezing it out again; there are others who
smear over it a liquid consisting of white of egg and double the amount
of bullock's blood or marrow. Some throw lime into the crucible through
a sieve.

Afterward the master of the works weighs the lead with which the gold or
silver or both are mixed, and he sometimes puts a hundred
_centumpondia_[31] into the crucible, but frequently only sixty, or
fifty, or much less. After it has been weighed, he strews about in the
crucible three small bundles of straw, lest the lead by its weight
should break the surface. Then he places in the channel several cakes of
lead alloy, and through the aperture at the rear of the dome he places
some along the sides; then, ascending to the opening at the top of the
dome, he arranges in the crucible round about the dome the cakes which
his assistant hands to him, and after ascending again and passing his
hands through the same aperture, he likewise places other cakes inside
the crucible. On the second day those which remain he, with an iron
fork, places on the wood through the rear aperture of the dome.

When the cakes have been thus arranged through the hole at the top of
the dome, he throws in charcoal with a basket woven of wooden twigs.
Then he places the lid over the dome, and the assistant covers over the
joints with lute. The master himself throws half a basketful of charcoal
into the crucible through the aperture next to the nozzle pipe, and
prepares the bellows, in order to be able to begin the second operation
on the morning of the following day. It takes the space of one hour to
carry out such a piece of work, and at twelve all is prepared. These
hours all reckoned up make a sum of eight hours.

Now it is time that we should come to the second operation. In the
morning the workman takes up two shovelsful of live charcoals and throws
them into the crucible through the aperture next to the pipes of the
nozzles; then through the same hole he lays upon them small pieces of
fir-wood or of pitch pine, such as are generally used to cook fish.
After this the water-gates are opened, in order that the machine may be
turned which depresses the levers of the bellows. In the space of one
hour the lead alloy is melted; and when this has been done, he places
four sticks of wood, twelve feet long, through the hole in the back of
the dome, and as many through the channel; these sticks, lest they
should damage the crucible, are both weighted on the ends and supported
by trestles; these trestles are made of a beam, three feet long, two
palms and as many digits wide, two palms thick, and have two spreading
legs at each end. Against the trestle, in front of the channel, there is
placed an iron plate, lest the litharge, when it is extracted from the
furnace, should splash the smelter's shoes and injure his feet and legs.
With an iron shovel or a fork he places the remainder of the cakes
through the aperture at the back of the dome on to the sticks of wood
already mentioned.

The native silver, or silver glance, or grey silver, or ruby silver, or
any other sort, when it has been flattened out[32], and cut up, and
heated in an iron crucible, is poured into the molten lead mixed with
silver, in order that impurities may be separated. As I have often said,
this molten lead mixed with silver is called _stannum_[33].

[Illustration 474 (Cupellation Furnace): A--Furnace. B--Sticks of wood.
C--Litharge. D--Plate. E--The foreman when hungry eats butter, that the
poison which the crucible exhales may not harm him, for this is a
special remedy against that poison.]

When the long sticks of wood are burned up at the fore end, the master,
with a hammer, drives into them pointed iron bars, four feet long and
two digits wide at the front end, and beyond that one and a half digits
wide and thick; with these he pushes the sticks of wood forward and the
bars then rest on the trestles. There are others who, when they separate
metals, put two such sticks of wood into the crucible through the
aperture which is between the bellows, as many through the holes at the
back, and one through the channel; but in this case a larger number of
long sticks of wood is necessary, that is, sixty; in the former case,
forty long sticks of wood suffice to carry out the operation. When the
lead has been heated for two hours, it is stirred with a hooked bar,
that the heat may be increased.

If it be difficult to separate the lead from the silver, he throws
copper and charcoal dust into the molten silver-lead alloy. If the alloy
of argentiferous gold and lead, or the silver-lead alloy, contains
impurities from the ore, then he throws in either equal portions of
argol and Venetian glass or of sal-ammoniac, or of Venetian glass and of
Venetian soap; or else unequal portions, that is, two of argol and one
of iron rust; there are some who mix a little saltpetre with each
compound. To one _centumpondium_ of the alloy is added a _bes_ or a
_libra_ and a third of the powder, according to whether it is more or
less impure. The powder certainly separates the impurities from the
alloy. Then, with a kind of rabble he draws out through the channel,
mixed with charcoal, the scum, as one might say, of the lead; the lead
makes this scum when it becomes hot, but that less of it may be made it
must be stirred frequently with the bar.

Within the space of a quarter of an hour the crucible absorbs the lead;
at the time when it penetrates into the crucible it leaps and bubbles.
Then the master takes out a little lead with an iron ladle, which he
assays, in order to find what proportion of silver there is in the whole
of the alloy; the ladle is five digits wide, the iron part of its handle
is three feet long and the wooden part the same. Afterward, when they
are heated, he extracts with a bar the litharge which comes from the
lead and the copper, if there be any of it in the alloy. Wherefore, it
might more rightly be called _spuma_ of lead than of silver[34]. There
is no injury to the silver, when the lead and copper are separated from
it. In truth the lead becomes much purer in the crucible of the other
furnace, in which silver is refined. In ancient times, as the author
Pliny[35] relates, there was under the channel of the crucible another
crucible, and the litharge flowed down from the upper one into the lower
one, out of which it was lifted up and rolled round with a stick in
order that it might be of moderate weight. For which reason, they
formerly made it into small tubes or pipes, but now, since it is not
rolled round a stick, they make it into bars.

If there be any danger that the alloy might flow out with the litharge,
the foreman keeps on hand a piece of lute, shaped like a cylinder and
pointed at both ends; fastening this to a hooked bar he opposes it to
the alloy so that it will not flow out.

[Illustration 476 (Cleansing of Silver Cakes): A--Cake. B--Stone.
C--Hammer. D--Brass wire. E--Bucket containing water. F--Furnace from
which the cake has been taken, which is still smoking. G--Labourer
carrying a cake out of the works.]

Now when the colour begins to show in the silver, bright spots appear,
some of them being almost white, and a moment afterward it becomes
absolutely white. Then the assistant lets down the water-gates, so that,
the race being closed, the water-wheel ceases to turn and the bellows
are still. Then the master pours several buckets of water on to the
silver to cool it; others pour beer over it to make it whiter, but this
is of no importance since the silver has yet to be refined. Afterward,
the cake of silver is raised with the pointed iron bar, which is three
feet long and two digits wide, and has a wooden handle four feet long
fixed in its socket. When the cake of silver has been taken from the
crucible, it is laid upon a stone, and from part of it the hearth-lead,
and from the other part the litharge, is chipped away with a hammer;
then it is cleansed with a bundle of brass wire dipped in water. When
the lead is separated from the silver, more silver is frequently found
than when it was assayed; for instance, if before there were three
_unciae_ and as many _drachmae_ in a _centumpondium_, they now sometimes
find three _unciae_ and a half[36]. Often the hearth-lead remaining in
the crucible is a palm deep; it is taken out with the rest of the ashes
and is sifted, and that which remains in the sieve, since it is
hearth-lead, is added to the hearth-lead[37].

The ashes which pass through the sieve are of the same use as they were
at first, for, indeed, from these and pulverised bones they make the
cupels. Finally, when much of it has accumulated, the yellow _pompholyx_
adhering to the walls of the furnace, and likewise to those rings of the
dome near the apertures, is cleared away.

[Illustration 479 (Crane for cupellation furnace): A--Crane-post.
B--Socket. C--Oak cross-sills. D--Band. E--Roof-beam. F--Frame. G--Lower
small cross-beam. H--Upright timber. I--Bars which come from the sides
of the crane-post. K--Bars which come from the sides of the upright
timber. L--Rundle drums. M--Toothed wheels. N--Chain. O--Pulley.
P--Beams of the crane-arm. Q--Oblique beams supporting the beams of the
crane-arm. R--Rectangular iron plates. S--Trolley. T--Dome of the
furnace. V--Ring. X--Three chains. Y--Crank. Z--The crane-post of the
other contrivance. AA--Crane-arm. BB--Oblique beam. CC--Ring of the
crane-arm. DD--The second ring. EE--Lever-bar. FF--Third ring. GG--Hook.
HH--Chain of the dome. II--Chain of the lever-bar.]

I must also describe the crane with which the dome is raised. When it is
made, there is first set up a rectangular upright post twelve feet long,
each side of which measures a foot in width. Its lower pinion turns in a
bronze socket set in an oak sill; there are two sills placed crosswise
so that the one fits in a mortise in the middle of the other, and the
other likewise fits in the mortise of the first, thus making a kind of a
cross; these sills are three feet long and one foot wide and thick. The
crane-post is round at its upper end and is cut down to a depth of three
palms, and turns in a band fastened at each end to a roof-beam, from
which springs the inclined chimney wall. To the crane-post is affixed a
frame, which is made in this way: first, at a height of a cubit from the
bottom, is mortised into the crane-post a small cross-beam, a cubit and
three digits long, except its tenons, and two palms in width and
thickness. Then again, at a height of five feet above it, is another
small cross-beam of equal length, width, and thickness, mortised into
the crane-post. The other ends of these two small cross-beams are
mortised into an upright timber, six feet three palms long, and
three-quarters wide and thick; the mortise is transfixed by wooden pegs.
Above, at a height of three palms from the lower small cross-beam, are
two bars, one foot one palm long, not including the tenons, a palm three
digits wide, and a palm thick, which are mortised in the other sides of
the crane-post. In the same manner, under the upper small cross-beam are
two bars of the same size. Also in the upright timber there are mortised
the same number of bars, of the same length as the preceding, but three
digits thick, a palm two digits wide, the two lower ones being above the
lower small cross-beam. From the upright timber near the upper small
cross-beam, which at its other end is mortised into the crane-post, are
two mortised bars. On the outside of this frame, boards are fixed to the
small cross-beams, but the front and back parts of the frame have doors,
whose hinges are fastened to the boards which are fixed to the bars that
are mortised to the sides of the crane-post.

Then boards are laid upon the lower small cross-beam, and at a height of
two palms above these there is a small square iron axle, the sides of
which are two digits wide; both ends of it are round and turn in bronze
or iron bearings, one of these bearings being fastened in the
crane-post, the other in the upright timber. About each end of the small
axle is a wooden disc, of three palms and a digit radius and one palm
thick, covered on the rim with an iron band; these two discs are distant
two palms and as many digits from each other, and are joined with five
rundles; these rundles are two and a half digits thick and are placed
three digits apart. Thus a drum is made, which is a palm and a digit
distant from the upright timber, but further from the crane-post,
namely, a palm and three digits. At a height of a foot and a palm above
this little axle is a second small square iron axle, the thickness of
which is three digits; this one, like the first one, turns in bronze or
iron bearings. Around it is a toothed wheel, composed of two discs a
foot three palms in diameter, a palm and two digits thick; on the rim of
this there are twenty-three teeth, a palm wide and two digits thick;
they protrude a palm from the wheel and are three digits apart. And
around this same axle, at a distance of two palms and as many digits
toward the upright timber, is another disc of the same diameter as the
wheel and a palm thick; this turns in a hollowed-out place in the
upright timber. Between this disc and the disc of the toothed wheel
another drum is made, having likewise five rundles. There is, in
addition to this second axle, at a height of a cubit above it, a small
wooden axle, the journals of which are of iron; the ends are bound round
with iron rings so that the journals may remain firmly fixed, and the
journals, like the little iron axles, turn in bronze or iron bearings.
This third axle is at a distance of about a cubit from the upper small
cross-beam; it has, near the upright timber, a toothed wheel two and a
half feet in diameter, on the rim of which are twenty-seven teeth; the
other part of this axle, near the crane-post, is covered with iron
plates, lest it should be worn away by the chain which winds around it.
The end link of the chain is fixed in an iron pin driven into the little
axle; this chain passes out of the frame and turns over a little pulley
set between the beams of the crane-arm.

Above the frame, at a height of a foot and a palm, is the crane-arm.
This consists of two beams fifteen feet long, three palms wide, and two
thick, mortised into the crane-post, and they protrude a cubit from the
back of the crane-post and are fastened together. Moreover, they are
fastened by means of a wooden pin which penetrates through them and the
crane-post; this pin has at the one end a broad head, and at the other a
hole, through which is driven an iron bolt, so that the beams may be
tightly bound into the crane-post. The beams of the crane-arm are
supported and stayed by means of two oblique beams, six feet and two
palms long, and likewise two palms wide and thick; these are mortised
into the crane-post at their lower ends, and their upper ends are
mortised into the beams of the crane-arm at a point about four feet from
the crane-post, and they are fastened with iron nails. At the back of
the upper end of these oblique beams, toward the crane-post, is an iron
staple, fastened into the lower sides of the beams of the crane-arm, in
order that it may hold them fast and bind them. The outer end of each
beam of the crane-arm is set in a rectangular iron plate, and between
these are three rectangular iron plates, fixed in such a manner that the
beams of the crane-arm can neither move away from, nor toward, each
other. The upper sides of these crane-arm beams are covered with iron
plates for a length of six feet, so that a trolley can move on it.

The body of the trolley is made of wood from the Ostrya or any other
hard tree, and is a cubit long, a foot wide, and three palms thick; on
both edges of it the lower side is cut out to a height and width of a
palm, so that the remainder may move backward and forward between the
two beams of the crane-arm; at the front, in the middle part, it is cut
out to a width of two palms and as many digits, that a bronze pulley,
around a small iron axle, may turn in it. Near the corners of the
trolley are four holes, in which as many small wheels travel on the
beams of the crane-arm. Since this trolley, when it travels backward and
forward, gives out a sound somewhat similar to the barking of a dog, we
have given it this name[38]. It is propelled forward by means of a
crank, and is drawn back by means of a chain. There is an iron hook
whose ring turns round an iron pin fastened to the right side of the
trolley, which hook is held by a sort of clavis, which is fixed in the
right beam of the crane-arm.

At the end of the crane-post is a bronze pulley, the iron axle of which
is fastened in the beams of the crane-arm, and over which the chain
passes as it comes from the frame, and then, penetrating through the
hollow in the top of the trolley, it reaches to the little bronze pulley
of the trolley, and passing over this it hangs down. A hook on its end
engages a ring, in which are fixed the top links of three chains, each
six feet long, which pass through the three iron rings fastened in the
holes of the claves which are fixed into the middle iron band of the
dome, of which I have spoken.

Therefore when the master wishes to lift the dome by means of the crane,
the assistant fits over the lower small iron axle an iron crank, which
projects from the upright beam a palm and two digits; the end of the
little axle is rectangular, and one and a half digits wide and one digit
thick; it is set into a similar rectangular hole in the crank, which is
two digits long and a little more than a digit wide. The crank is
semi-circular, and one foot three palms and two digits long, as many
digits wide, and one digit thick. Its handle is straight and round, and
three palms long, and one and a half digits thick. There is a hole in
the end of the little axle, through which an iron pin is driven so that
the crank may not come off. The crane having four drums, two of which
are rundle-drums and two toothed-wheels, is more easily moved than
another having two drums, one of which has rundles and the other teeth.

Many, however, use only a simple contrivance, the pivots of whose
crane-post turn in the same manner, the one in an iron socket, the other
in a ring. There is a crane-arm on the crane-post, which is supported by
an oblique beam; to the head of the crane-arm a strong iron ring is
fixed, which engages a second iron ring. In this iron ring a strong
wooden lever-bar is fastened firmly, the head of which is bound by a
third iron ring, from which hangs an iron hook, which engages the rings
at the ends of the chains from the dome. At the other end of the
lever-bar is another chain, which, when it is pulled down, raises the
opposite end of the bar and thus the dome; and when it is relaxed the
dome is lowered.

[Illustration 481 (Cupellation Furnace at Freiberg): A--Chamber of the
furnace. B--Its bed. C--Passages. D--Rammer. E--Mallet. F--Artificer
making tubes from litharge according to the Roman method. G--Channel.
H--Litharge. I--Lower crucible or hearth. K--Stick. L--Tubes.]

In certain places, as at Freiberg in Meissen, the upper part of the
cupellation furnace is vaulted almost like an oven. This chamber is four
feet high and has either two or three apertures, of which the first, in
front, is one and a half feet high and a foot wide, and out of this
flows the litharge; the second aperture and likewise the third, if there
be three, are at the sides, and are a foot and a half high and two and a
half feet wide, in order that he who prepares the crucible may be able
to creep into the furnace. Its circular bed is made of cement, it has
two passages two feet high and one foot wide, for letting out the
vapour, and these lead directly through from one side to the other, so
that the one passage crosses the other at right angles, and thus four
openings are to be seen; these are covered at the top by rocks, wide,
but only a palm thick. On these and on the other parts of the interior
of the bed made of cement, is placed lute mixed with straw, to a depth
of three digits, as it was placed over the sole and the plates of copper
and the rocks of that other furnace. This, together with the ashes which
are thrown in, the master or the assistant, who, upon his knees,
prepares the crucible, tamps down with short wooden rammers and with
mallets likewise made of wood.

[Illustration 482 (Cupellation Furnace in Poland): A--Furnace similar to
an oven. B--Passage. C--Iron bars. D--Hole through which the litharge is
drawn out. E--Crucible which lacks a dome. F--Thick sticks. G--Bellows.]

The cupellation furnace in Poland and Hungary is likewise vaulted at
the top, and is almost similar to an oven, but in the lower part the bed
is solid, and there is no opening for the vapours, while on one side of
the crucible is a wall, between which and the bed of the crucible is a
passage in place of the opening for vapours; this passage is covered by
iron bars or rods extending from the wall to the crucible, and placed a
distance of two digits from each other. In the crucible, when it is
prepared, they first scatter straw, and then they lay in it cakes of
silver-lead alloy, and on the iron bars they lay wood, which when
kindled heats the crucible. They melt cakes to the weight of sometimes
eighty _centumpondia_ and sometimes a hundred _centumpondia_[39]. They
stimulate a mild fire by means of a blast from the bellows, and throw on
to the bars as much wood as is required to make a flame which will reach
into the crucible, and separate the lead from the silver. The litharge
is drawn out on the other side through an aperture that is just wide
enough for the master to creep through into the crucible. The Moravians
and Carni, who very rarely make more than a _bes_ or five-sixths of a
_libra_ of silver, separate the lead from it, neither in a furnace
resembling an oven, nor in the crucible covered by a dome, but on a
crucible which is without a cover and exposed to the wind; on this
crucible they lay cakes of silver-lead alloy, and over them they place
dry wood, and over these again thick green wood. The wood having been
kindled, they stimulate the fire by means of a bellows.

[Illustration 484 (Refining Silver): A--Pestle with teeth. B--Pestle
without teeth. C--Dish or tray full of ashes. D--Prepared tests placed
on boards or shelves. E--Empty tests. F--Wood. G--Saw.]

[Illustration 485 (Refining Silver): A--Straight knife having wooden
handles. B--Curved knife likewise having wooden handles. C--Curved knife
without wooden handles. D--Sieve. E--Balls. F--Iron door which the
master lets down when he refines silver, lest the heat of the fire
should injure his eyes. G--Iron implement on which the wood is placed
when the liquid silver is to be refined. H--Its other part passing
through the ring of another iron implement enclosed in the wall of the
furnace. I--Tests in which burning charcoal has been thrown.]

I have explained the method of separating lead from gold or silver. Now
I will speak of the method of refining silver, for I have already
explained the process for refining gold. Silver is refined in a refining
furnace, over whose hearth is an arched chamber built of bricks; this
chamber in the front part is three feet high. The hearth itself is five
feet long and four wide. The walls are unbroken along the sides and
back, but in front one chamber is placed over the other, and above these
and the wall is the upright chimney. The hearth has a round pit, a cubit
wide and two palms deep, into which are thrown sifted ashes, and in this
is placed a prepared earthenware "test," in such a manner that it is
surrounded on all sides by ashes to a height equal to its own. The
earthenware test is filled with a powder consisting of equal portions of
bones ground to powder, and of ashes taken from the crucible in which
lead is separated from gold or silver; others mix crushed brick with the
ashes, for by this method the powder attracts no silver to itself. When
the powder has been made up and moistened with water, a little is thrown
into the earthenware test and tamped with a wooden pestle. This pestle
is round, a foot long, and a palm and a digit wide, out of which extend
six teeth, each a digit thick, and a digit and a third long and wide,
and almost a digit apart; these six teeth form a circle, and in the
centre of them is the seventh tooth, which is round and of the same
length as the others, but a digit and a half thick; this pestle tapers a
little from the bottom up, that the upper part of the handle may be
round and three digits thick. Some use a round pestle without teeth.
Then a little powder is again moistened, and thrown into the test, and
tamped; this work is repeated until the test is entirely full of the
powder, which the master then cuts out with a knife, sharp on both
sides, and turned upward at both ends so that the central part is a palm
and a digit long; therefore it is partly straight and partly curved. The
blade is one and a half digits wide, and at each end it turns upward two
palms, which ends to the depth of a palm are either not sharpened or
they are enclosed in wooden handles. The master holds the knife with one
hand and cuts out the powder from the test, so that it is left three
digits thick all round; then he sifts the powder of dried bones over it
through a sieve, the bottom of which is made of closely-woven bristles.
Afterward a ball made of very hard wood, six digits in diameter, is
placed in the test and rolled about with both hands, in order to make
the inside even and smooth; for that matter he may move the ball about
with only one hand. The tests[40] are of various capacities, for some of
them when prepared hold much less than fifteen _librae_ of silver,
others twenty, some thirty, others forty, and others fifty. All these
tests thus prepared are dried in the sun, or set in a warm and covered
place; the more dry and old they are the better. All of them, when used
for refining silver, are heated by means of burning charcoal placed in
them. Others use instead of these tests an iron ring; but the test is
more useful, for if the powder deteriorates the silver remains in it,
while there being no bottom to the ring, it falls out; besides, it is
easier to place in the hearth the test than the iron ring, and
furthermore it requires much less powder. In order that the test should
not break and damage the silver, some bind it round with an iron band.

[Illustration 486 (Refining Silver): A--Grate. B--Brass block. C--Block
of wood. D--Cakes of silver. E--Hammer. F--Block of wood channelled in
the middle. G--Bowl full of holes. H--Block of wood fastened to an iron
implement. I--Fir-wood. K--Iron bar. L--Implement with a hollow end. The
implement which has a circular end is shown in the next picture.
M--Implement, the extremity of which is bent upwards. N--Implement in
the shape of tongs.]

In order that they may be more easily broken, the silver cakes are
placed upon an iron grate by the refiner, and are heated by burning
charcoal placed under them. He has a brass block two palms and two
digits long and wide, with a channel in the middle, which he places upon
a block of hard wood. Then with a double-headed hammer, he beats the hot
cakes of silver placed on the brass block, and breaks them in pieces.
The head of this hammer is a foot and two digits long, and a palm wide.
Others use for this purpose merely a block of wood channelled in the
top. While the fragments of the cake are still hot, he seizes them with
the tongs and throws them into a bowl with holes in the bottom, and
pours water over them. When the fragments are cooled, he puts them
nicely into the test by placing them so that they stand upright and
project from the test to a height of two palms, and lest one should fall
against the other, he places little pieces of charcoal between them;
then he places live charcoal in the test, and soon two twig basketsful
of charcoal. Then he blows in air with the bellows. This bellows is
double, and four feet two palms long, and two feet and as many palms
wide at the back; the other parts are similar to those described in Book
VII. The nozzle of the bellows is placed in a bronze pipe a foot long,
the aperture in this pipe being a digit in diameter in front and quite
round, and at the back two palms wide. The master, because he needs for
the operation of refining silver a fierce fire, and requires on that
account a vigorous blast, places the bellows very much inclined, in
order that, when the silver has melted, it may blow into the centre of
the test. When the silver bubbles, he presses the nozzle down by means
of a small block of wood moistened with water and fastened to an iron
rod, the outer end of which bends upward. The silver melts when it has
been heated in the test for about an hour; when it is melted, he removes
the live coals from the test and places over it two billets of fir-wood,
a foot and three palms long, a palm two digits wide, one palm thick at
the upper part, and three digits at the lower. He joins them together at
the lower edges, and into the billets he again throws the coals, for a
fierce fire is always necessary in refining silver. It is refined in two
or three hours, according to whether it was pure or impure, and if it is
impure it is made purer by dropping granulated copper or lead into the
test at the same time. In order that the refiner may sustain the great
heat from the fire while the silver is being refined, he lets down an
iron door, which is three feet long and a foot and three palms high;
this door is held on both ends in iron plates, and when the operation is
concluded, he raises it again with an iron shovel, so that its edge
holds against the iron hook in the arch, and thus the door is held open.
When the silver is nearly refined, which may be judged by the space of
time, he dips into it an iron bar, three and a half feet long and a
digit thick, having a round steel point. The small drops of silver that
adhere to the bar he places on the brass block and flattens with a
hammer, and from their colour he decides whether the silver is
sufficiently refined or not. If it is thoroughly purified it is very
white, and in a _bes_ there is only a _drachma_ of impurities. Some
ladle up the silver with a hollow iron implement. Of each _bes_ of
silver one _sicilicus_ is consumed, or occasionally when very impure,
three _drachmae_ or half an _uncia_[41].

[Illustration 488 (Cleansing of Silver Cakes): A--Implement with a ring.
B--Ladle. C--Its hole. D--Pointed bar. E--Forks. F--Cake of silver laid
upon the implement shaped like tongs. G--Tub of water. H--Block of wood,
with a cake laid upon it. I--Hammer. K--Silver again placed upon the
implement resembling tongs. L--Another tub full of water. M--Brass
wires. N--Tripod. O--Another block. P--Chisel. Q--Crucible of the
furnace. R--Test still smoking.]

The refiner governs the fire and stirs the molten silver with an iron
implement, nine feet long, a digit thick, and at the end first curved
toward the right, then curved back in order to form a circle, the
interior of which is a palm in diameter; others use an iron implement,
the end of which is bent directly upward. Another iron implement has the
shape of tongs, with which, by compressing it with his hands, he seizes
the coals and puts them on or takes them off; this is two feet long, one
and a half digits wide, and the third of a digit thick.

When the silver is seen to be thoroughly refined, the artificer removes
the coals from the test with a shovel. Soon afterward he draws water in
a copper ladle, which has a wooden handle four feet long; it has a small
hole at a point half-way between the middle of the bowl and the edge,
through which a hemp seed just passes. He fills this ladle three times
with water, and three times it all flows out through the hole on to the
silver, and slowly quenches it; if he suddenly poured much water on it,
it would burst asunder and injure those standing near. The artificer has
a pointed iron bar, three feet long, which has a wooden handle as many
feet long, and he puts the end of this bar into the test in order to
stir it. He also stirs it with a hooked iron bar, of which the hook is
two digits wide and a palm deep, and the iron part of its handle is
three feet long and the wooden part the same. Then he removes the test
from the hearth with a shovel or a fork, and turns it over, and by this
means the silver falls to the ground in the shape of half a sphere; then
lifting the cake with a shovel he throws it into a tub of water, where
it gives out a great sound. Or else, having lifted the cake of silver
with a fork, he lays it upon the iron implement similar to tongs, which
are placed across a tub full of water; afterward, when cooled, he takes
it from the tub again and lays it on the block made of hard wood and
beats it with a hammer, in order to break off any of the powder from the
test which adheres to it. The cake is then placed on the implement
similar to tongs, laid over the tub full of water, and cleaned with a
bundle of brass wire dipped into the water; this operation of beating
and cleansing is repeated until it is all clean. Afterward he places it
on an iron grate or tripod; the tripod is a palm and two digits high,
one and a half digits wide, and its span is two palms wide; then he puts
burning charcoal under the tripod or grate, in order again to dry the
silver that was moistened by the water. Finally, the Royal Inspector[42]
in the employment of the King or Prince, or the owner, lays the silver
on a block of wood, and with an engraver's chisel he cuts out two small
pieces, one from the under and the other from the upper side. These are
tested by fire, in order to ascertain whether the silver is thoroughly
refined or not, and at what price it should be sold to the merchants.
Finally he impresses upon it the seal of the King or the Prince or the
owner, and, near the same, the amount of the weight.

[Illustration 489 (Refining Silver): A--Muffle. B--Its little windows.
C--Its little bridge. D--Bricks. E--Iron door. F--Its little window.
G--Bellows. H--Hammer-chisel. I--Iron ring which some use instead of the
test. K--Pestle with which the ashes placed in the ring are pounded.]

There are some who refine silver in tests placed under iron or
earthenware muffles. They use a furnace, on the hearth of which they
place the test containing the fragments of silver, and they place the
muffle over it; the muffle has small windows at the sides, and in front
a little bridge. In order to melt the silver, at the sides of the muffle
are laid bricks, upon which the charcoal is placed, and burning
firebrands are put on the bridge. The furnace has an iron door, which is
covered on the side next to the fire with lute in order that it may not
be injured. When the door is closed it retains the heat of the fire, but
it has a small window, so that the artificers may look into the test and
may at times stimulate the fire with the bellows. Although by this
method silver is refined more slowly than by the other, nevertheless it
is more useful, because less loss is caused, for a gentle fire consumes
fewer particles than a fierce fire continually excited by the blast of
the bellows. If, on account of its great size, the cake of silver can be
carried only with difficulty when it is taken out of the muffle, they
cut it up into two or three pieces while it is still hot, with a wedge
or a hammer-chisel; for if they cut it up after it has cooled, little
pieces of it frequently fly off and are lost.

     END OF BOOK X.


FOOTNOTES:

[1] _Vile a precioso_.

[2] The reagents mentioned in this Book are much the same as those of
Book VII, where (p. 220) a table is given showing the Latin and Old
German terms. Footnotes in explanation of our views as to these
substances may be most easily consulted through the index.

[3] _Aqua valens_, literally strong, potent, or powerful water. It will
appear later, from the method of manufacture, that hydrochloric, nitric,
and sulphuric acids and _aqua regia_ were more or less all produced and
all included in this term. We have, therefore, used either the term
_aqua valens_ or simply _aqua_ as it occurs in the text. The terms _aqua
fortis_ and _aqua regia_ had come into use prior to Agricola, but he
does not use them; the Alchemists used various terms, often _aqua
dissolvia_. It is apparent from the uses to which this reagent was put
in separating gold and silver, from the method of clarifying it with
silver and from the red fumes, that Agricola could have had practical
contact only with nitric acid. It is probable that he has copied part of
the recipes for the compounds to be distilled from the Alchemists and
from such works as the _Probierbuechlein_. In any event he could not have
had experience with them all, for in some cases the necessary
ingredients for making nitric acid are not all present, and therefore
could be of no use for gold and silver separation. The essential
ingredients for the production of this acid by distillation, were
saltpetre, water, and either vitriol or alum. The other substances
mentioned were unnecessary, and any speculation as to the combinations
which would result, forms a useful exercise in chemistry, but of little
purpose here. The first recipe would no doubt produce hydrochloric acid.

[4] Agricola, in the _Interpretatio_, gives the German equivalent for
the Latin _aerugo_ as _Spanschgruen_--"because it was first brought to
Germany from Spain; foreigners call it _viride aeris_ (copper green)."
The English "verdigris" is a corruption of _vert de grice_. Both
verdigris and white lead were very ancient products, and they naturally
find mention together among the ancient authors. The earliest
description of the method of making is from the 3rd Century B.C., by
Theophrastus, who says (101-2): "But these are works of art, as is also
Ceruse (_psimythion_) to make which, lead is placed in earthen vessels
over sharp vinegar, and after it has acquired some thickness of a kind
of rust, which it commonly does in about ten days, they open the vessels
and scrape off, as it were, a kind of foulness; they then place the lead
over the vinegar again, repeating over and over again the same method of
scraping it till it is wholly dissolved; what has been scraped off they
then beat to powder and boil for a long time; and what at last subsides
to the bottom of the vessel is the white lead.... Also in a manner
somewhat resembling this, verdigris (_ios_) is made, for copper is
placed over lees of wine (grape refuse?), and the rust which it acquires
by this means is taken off for use. And it is by this means that the
rust which appears is produced." (Based on Hill's translation.)
Vitruvius (VII, 12), Dioscorides (V, 51), and Pliny (XXXIV, 26 and 54),
all describe the method of making somewhat more elaborately.

[5] _Amiantus_ (_Interpretatio_ gives _federwis_, _pliant_,
_salamanderhar_). From Agricola's elaborate description in _De Natura
Fossilium_ (p. 252) there can be no doubt that he means asbestos. This
mineral was well-known to the Ancients, and is probably earliest
referred to (3rd Century B.C.) by Theophrastus in the following passage
(29): "There is also found in the mines of Scaptesylae a stone, in its
external appearance somewhat resembling wood, on which, if oil be
poured, it burns; but when the oil is burnt away, the burning of the
stone ceases, as if it were in itself not liable to such accidents."
There can be no doubt that Strabo (X, 1) describes the mineral: "At
Carystus there is found in the earth a stone, which is combed like wool,
and woven, so that napkins are made of this substance, which, when
soiled, are thrown into the fire and cleaned, as in the washing of
linen." It is also described by Dioscorides (V, 113) and Pliny (XIX, 4).
Asbestos cloth has been found in Pre-Augustinian Roman tombs.

[6] This list of four recipes is even more obscure than the previous
list. If they were distilled, the first and second mixtures would not
produce nitric acid, although possibly some sulphuric would result. The
third might yield nitric, and the fourth _aqua regia_. In view of the
water, they were certainly not used as cements, and the first and second
are deficient in the vital ingredients.

[7] _Distillation_, at least in crude form, is very old. Aristotle
(_Meteorologica_, IV.) states that sweet water can be made by
evaporating salt-water and condensing the steam. Dioscorides and Pliny
both describe the production of mercury by distillation (note 58, p.
432). The Alchemists of the Alexandrian School, from the 1st to the 6th
Centuries, mention forms of imperfect apparatus--an ample discussion of
which may be found in Kopp, _Beitraege zur Geschichte der Chemie_,
Braunschweig, 1869, p. 217.

[8] It is desirable to note the contents of the residues in the retort,
for it is our belief that these are the materials to which the author
refers as "lees of the water which separates gold from silver," in many
places in Book VII. They would be strange mixtures of sodium, potassium,
aluminium sulphates, with silica, brickdust, asbestos, and various
proportions of undigested vitriol, salt, saltpetre, alum, iron oxides,
etc. Their effect must have been uncertain. Many old German metallurgies
also refer to the _Todenkopf der Scheidwasser_, among them the
_Probierbuechlein_ before Agricola, and after him Lazarus Ercker
(_Beschreibung Allerfuernemsten_, etc., Prague, 1574). See also note 16,
p. 234.

[9] This use of silver could apply to one purpose only, that is, the
elimination of minor amounts of hydrochloric from the nitric acid, the
former originating no doubt from the use of salt among the ingredients.
The silver was thus converted into a chloride and precipitated. This use
of a small amount of silver to purify the nitric acid was made by
metallurgists down to fairly recent times. Biringuccio (IV, 2) and
Lazarus Ercker (p. 71) both recommend that the silver be dissolved first
in a small amount of acid, and the solution poured into the
newly-manufactured supply. They both recommend preserving this
precipitate and its cupellation after melting with lead--which Agricola
apparently overlooked.

[10] In this description of parting by nitric acid, the author digresses
from his main theme on pages 444 and 445, to explain a method apparently
for small quantities where the silver was precipitated by copper, and to
describe another cryptic method of precipitation. These subjects are
referred to in notes 11 and 12 below. The method of parting set out here
falls into six stages: _a_--cupellation, _b_--granulation, _c_--solution
in acid, _d_--treatment of the gold residues, _e_--evaporation of the
solution, _f_--reduction of the silver nitrate. For nitric acid parting,
bullion must be free from impurities, which cupellation would ensure; if
copper were left in, it would have the effect he mentions if we
understand "the silver separated from the gold soon unites with it
again," to mean that the silver unites with the copper, for the copper
would go into solution and come down with the silver on evaporation.
Agricola does not specifically mention the necessity of an excess of
silver in this description, although he does so elsewhere, and states
that the ratio must be at least three parts silver to one part gold. The
first description of the solution of the silver is clear enough, but
that on p. 445 is somewhat difficult to follow, for the author states
that the bullion is placed in a retort with the acid, and that
distillation is carried on between each additional charge of acid. So
far as the arrangement of a receiver might relate to the saving of any
acid that came over accidentally in the boiling, it can be understood,
but to distill off much acid would soon result in the crystallization of
the silver nitrate, which would greatly impede the action of subsequent
acid additions, and finally the gold could not be separated from such
nitrate in the way described. The explanation may be (apart from
incidental evaporation when heating) that the acids used were very weak,
and that by the evaporation of a certain amount of water, not only was
the acid concentrated, but room was provided for the further charges.
The acid in the gold wash-water, mentioned in the following paragraph,
was apparently thus concentrated. The "glass" mentioned as being melted
with litharge, argols, nitre, etc., was no doubt the silver nitrate. The
precipitation of the silver from the solution as a chloride, by the use
of salt, so generally used during the 18th and 19th Centuries, was known
in Agricola's time, although he does not mention it. It is mentioned in
Geber and the _Probierbuechlein_. The clarity of the latter on the
subject is of some interest (p. 34a): "How to pulverise silver and again
make it into silver. Take the silver and dissolve it in water with the
_starckenwasser_, _aqua fort_, and when that is done, take the silver
water and pour it into warm salty water, and immediately the silver
settles to the bottom and becomes powder. Let it stand awhile until it
has well settled, then pour away the water from it and dry the
settlings, which will become a powder like ashes. Afterward one can
again make it into silver. Take the powder and put it on a _test_, and
add thereto the powder from the settlings from which the _aqua forte_
has been made, and add lead. Then if there is a great deal, blow on it
until the lead has incorporated itself ... blow it until it _plickt_
(_blickens_). Then you will have as much silver as before."

[11] The silver is apparently precipitated by the copper of the bowl. It
would seem that this method was in considerable use for small amounts of
silver nitrate in the 16th Century. Lazarus Ercker gives elaborate
directions for this method (_Beschreibung Allerfuernemsten_, etc.,
Prague, 1574, p. 77).

[12] We confess to a lack of understanding of this operation with leaves
of lead and copper.

[13] We do not understand this "appearance of black." If the nitrate
came into contact with organic matter it would, of course, turn black by
reduction of the silver, and sunlight would have the same effect.

[14] This would be equal to from 62 to 94 parts of copper in 1,000.

[15] As 144 _siliquae_ are 1 _uncia_, then 1/4 _siliqua_ in 8 _unciae_
would equal one part silver in 4,608 parts gold, or about 999.8 fine.

[16] The object of this treatment with sulphur and copper is to separate
a considerable portion of silver from low-grade bullion (_i.e._, silver
containing some gold), in preparation for final treatment of the richer
gold-silver alloy with nitric acid. Silver sulphide is created by adding
sulphur, and is drawn off in a silver-copper regulus. After the first
sentence, the author uses silver alone where he obviously means silver
"containing some gold," and further he speaks of the "gold lump"
(_massula_) where he likewise means a button containing a great deal of
silver. For clarity we introduced the term "regulus" for the Latin
_mistura_. The operation falls into six stages: _a_, granulation; _b_,
sulphurization of the granulated bullion; _c_, melting to form a
combination of the silver sulphide with copper into a regulus, an alloy
of gold and silver settling out; _d_, repetition of the treatment to
abstract further silver from the "lump;" _e_, refining the "lump" with
nitric acid; _f_, recovery of the silver from the regulus by addition of
lead, liquation and cupellation.

The use of a "circle of fire" secures a low temperature that would
neither volatilize the sulphur nor melt the bullion. The amount of
sulphur given is equal to a ratio of 48 parts bullion and 9 parts
sulphur. We are not certain about the translation of the paragraph in
relation to the proportion of copper added to the granulated bullion;
because in giving definite quantities of copper to be added in the
contingencies of various original copper contents in the bullion, it
would be expected that they were intended to produce some positive ratio
of copper and silver. However, the ratio as we understand the text in
various cases works out to irregular amounts, _i.e._, 48 parts of silver
to 16, 12.6, 24, 20.5, 20.8, 17.8, or 18 parts of copper. In order to
obtain complete separation there should be sufficient sulphur to have
formed a sulphide of the copper as well as of the silver, or else some
of the copper and silver would come down metallic with the "lump". The
above ratio of copper added to the sulphurized silver, in the first
instance would give about 18 parts of copper and 9 parts of sulphur to
48 parts of silver. The copper would require 4.5 parts of sulphur to
convert it into sulphide, and the silver about 7 parts, or a total of
11.5 parts required against 9 parts furnished. It is plain, therefore,
that insufficient sulphur is given. Further, the litharge would probably
take up some sulphur and throw down metallic lead into the "lump".
However, it is necessary that there should be some free metallics to
collect the gold, and, therefore, the separation could not be complete
in one operation. In any event, on the above ratios the "gold lump" from
the first operation was pretty coppery, and contained some lead and
probably a good deal of silver, because the copper would tend to
desulphurize the latter. The "powder" of glass-galls, salt, and litharge
would render the mass more liquid and assist the "gold lump" to separate
out.

The Roman silver _sesterce_, worth about 2-1/8 pence or 4.2 American
cents, was no doubt used by Agricola merely to indicate an infinitesimal
quantity. The test to be applied to the regulus by way of cupellation
and parting of a sample with nitric acid, requires no explanation. The
truth of the description as to determining whether the gold had settled
out, by using a chalked iron rod, can only be tested by actual
experiment. It is probable, however, that the sulphur in the regulus
would attack the iron and make it black. The re-melting of the regulus,
if some gold remains in it, with copper and "powder" without more
sulphur, would provide again free metallics to gather the remaining
gold, and by desulphurizing some silver this button would probably not
be very pure.

From the necessity for some free metallics besides the gold in the first
treatment, it will be seen that a repetition of the sulphur addition and
re-melting is essential gradually to enrich the "lump". Why more copper
is added is not clear. In the second melting, the ratio is 48 parts of
the "gold lump", 12 parts of sulphur and 12 parts copper. In this case
the added copper would require about 3 parts sulphur, and if we consider
the deficiency of sulphur in the first operations pertained entirely to
the copper, then about 2.5 parts would be required to make good the
shortage, or in other words the second addition of sulphur is
sufficient. In the final parting of the "lump" it will be noticed that
the author states that the silver ratio must be arranged as three of
silver to one of gold. As to the recovery of the silver from the
regulus, he states that 66 _librae_ of silver give 132 _librae_ of
_regulus_. To this, 500 _librae_ of lead are added, and it is melted in
the "second" furnace, and the litharge and hearth-lead made are
re-melted in the "first" furnace, the cakes made being again treated in
the "third" furnace to separate the copper and lead. The "first" is
usually the blast furnace, the "second" furnace is the cupellation
furnace, and the "third" the liquation furnace. It is difficult to
understand this procedure. The charge sent to the cupellation furnace
would contain between 3% and 5% copper, and between 3% and 5% sulphur.
However, possibly the sulphur and copper could be largely abstracted in
the skimmings from the cupellation furnace, these being subsequently
liquated in the "third" furnace. It may be noted that two whole lines
from this paragraph are omitted in the editions of _De Re Metallica_
after 1600. For historical note on sulphur separation see page 461.

[17] There can be no doubt that in most instances Agricola's _stibium_
is antimony sulphide, but it does not follow that it was the mineral
_stibnite_, nor have we considered it desirable to introduce the
precision of either of these modern terms, and have therefore retained
the Latin term where the sulphide is apparently intended. The use of
antimony sulphide to part silver from gold is based upon the greater
affinity of silver than antimony for sulphur. Thus the silver, as in the
last process, is converted into a sulphide, and is absorbed in the
regulus, while the metallic antimony alloys with the gold and settles to
the bottom of the pot. This process has several advantages over the
sulphurization with crude sulphur; antimony is a more convenient vehicle
of sulphur, for it saves the preliminary sulphurization with its
attendant difficulties of volatilization of the sulphur; it also saves
the granulation necessary in the former method; and the treatment of the
subsequent products is simpler. However, it is possible that the
sulphur-copper process was better adapted to bullion where the
proportion of gold was low, because the fineness of the bullion
mentioned in connection with the antimonial process was apparently much
higher than the previous process. For instance, a _bes_ of gold,
containing 5, 6, or 7 double _sextulae_ of silver would be .792, .750 or
.708 fine. The antimonial method would have an advantage over nitric
acid separation, in that high-grade bullion could be treated direct
without artificial decrease of fineness required by inquartation to
about .250 fine, with the consequent incidental losses of silver
involved.

The process in this description falls into six operations: _a_,
sulphurization of the silver by melting with antimony sulphide; _b_,
separation of the gold "lump" (_massula_) by jogging; _c_, re-melting
the regulus (_mistura_) three or four times for recovery of further
"lumps"; _d_, re-melting of the "lump" four times, with further
additions of antimony sulphide; _e_, cupellation of the regulus to
recover the silver; _f_, cupellation of the antimony from the "lump" to
recover the gold. Percy seems to think it difficult to understand the
insistence upon the addition of copper. Biringuccio (IV, 6) states,
among other things, that copper makes the ingredients more liquid. The
later metallurgists, however, such as Ercker, Lohneys, and Schlueter, do
not mention this addition; they do mention the "swelling and frothing,"
and recommend that the crucible should be only partly filled. As to the
copper, we suggest that it would desulphurize part of the antimony and
thus free some of that metal to collect the gold. If we assume bullion
of the medium fineness mentioned and containing no copper, then the
proportions in the first charge would be about 36 parts gold, 12 parts
silver, 41 parts sulphur, 103 parts antimony, and 9 parts copper. The
silver and copper would take up 4.25 parts of sulphur, and thus free
about 10.6 parts of antimony as metallics. It would thus appear that the
amount of metallics provided to assist the collection of the gold was
little enough, and that the copper in freeing 5.6 parts of the antimony
was useful. It appears to have been necessary to have a large excess of
antimony sulphide; for even with the great surplus in the first charge,
the reaction was only partial, as is indicated by the necessity for
repeated melting with further antimony.

The later metallurgists all describe the separation of the metallic
antimony from the gold as being carried out by oxidation of the
antimony, induced by a jet of air into the crucible, this being
continued until the mass appears limpid and no cloud forms in the
surface in cooling. Agricola describes the separation of the silver from
the regulus by preliminary melting with argols, glass-gall, and some
lead, and subsequent cupellation of the lead-silver alloy. The statement
that unless this preliminary melting is done, the cupel will absorb
silver, might be consonant with an attempt at cupellation of sulphides,
and it is difficult to see that much desulphurizing could take place
with the above fluxes. In fact, in the later descriptions of the
process, iron is used in this melting, and we are under the impression
that Agricola had omitted this item for a desulphurizing reagent. At the
Dresden Mint, in the methods described by Percy (Metallurgy Silver and
Gold, p. 373) the gold lumps were tested for fineness, and from this the
amount of gold retained in the regulus was computed. It is not clear
from Agricola's account whether the test with nitric acid was applied to
the regulus or to the "lumps". For historical notes see p. 461.

[18] As will be shown in the historical note, this process of separating
gold and silver is of great antiquity--in all probability the only
process known prior to the Middle Ages, and in any event, the first one
used. In general the process was performed by "cementing" the
disintegrated bullion with a paste and subjecting the mass to
long-continued heat at a temperature under the melting point of the
bullion. The cement (_compositio_) is of two different species; in the
first species saltpetre and vitriol and some aluminous or silicious
medium are the essential ingredients, and through them the silver is
converted into nitrate and absorbed by the mass; in the second species,
common salt and the same sort of medium are the essentials, and in this
case the silver is converted into a chloride. Agricola does not
distinguish between these two species, for, as shown by the text, his
ingredients are badly mixed.

The process as here described falls into five operations: _a_,
granulation of the bullion or preparation of leaves; _b_, heating
alternate layers of cement and bullion in pots; _c_, washing the gold to
free it of cement; _d_, melting the gold with borax or soda; _e_,
treatment of the cement by way of melting with lead and cupellation to
recover the silver. Investigation by Boussingault (_Ann. De Chimie_,
1833, p. 253-6), D'Elhuyar (_Bergbaukunde_, Leipzig, 1790, Vol. II, p.
200), and Percy (Metallurgy of Silver and Gold, p. 395), of the action
of common salt upon silver under cementation conditions, fairly well
demonstrated the reactions involved in the use of this species of
cement. Certain factors are essential besides salt: _a_, the admission
of air, which is possible through the porous pots used; _b_, the
presence of some moisture to furnish hydrogen; _c_, the addition of
alumina or silica. The first would be provided by Agricola in the use of
new pots, the second possibly by use of wood fuel in a closed furnace,
the third by the inclusion of brickdust. The alumina or silica at high
temperatures decomposes the salt, setting free hydrochloric acid and
probably also free chlorine. The result of the addition of vitriol in
Agricola's ingredients is not discussed by those investigators, but
inasmuch as vitriol decomposes into sulphuric acid under high
temperatures, this acid would react upon the salt to free hydrochloric
acid, and thus assist to overcome deficiencies in the other factors. It
is possible also that sulphuric acid under such conditions would react
directly upon the silver to form silver sulphates, which would be
absorbed into the cement. As nitric acid is formed by vitriol and
saltpetre at high temperatures, the use of these two substances as a
cementing compound would produce nitric acid, which would at once attack
the silver to form silver nitrate, which would be absorbed into the
melted cement. In this case the brickdust probably acted merely as a
vehicle for the absorption, and to lower the melting point of the mass
and prevent fusion of the metal. While nitric acid will only part gold
and silver when the latter is in great excess, yet when applied as fumes
under cementation conditions it appears to react upon a minor ratio of
silver. While the reactions of the two above species of compounds can be
accounted for in a general way, the problem furnished by Agricola's
statements is by no means simple, for only two of his compounds are
simply salt cements, the others being salt and nitre mixtures. An
inspection of these compounds produces at once a sense of confusion.
Salt is present in every compound, saltpetre in all but two, vitriol in
all but three. Lewis (_Traite Singulier de Metallique_, Paris, 1743, II,
pp. 48-60), in discussing these processes, states that salt and
saltpetre must never be used together, as he asserts that in this case
_aqua regia_ would be formed and the gold dissolved. Agricola, however,
apparently found no such difficulty. As to the other ingredients, apart
from nitre, salt, vitriol, and brickdust, they can have been of no use.
Agricola himself points out that ingredients of "metallic origin"
corrupt the gold and that brickdust and common salt are sufficient. In a
description of this process in the _Probierbuechlein_ (p. 58), no nitre
is mentioned. This booklet does mention the recovery of the silver from
the cement by amalgamation with mercury--the earliest mention of silver
amalgamation.

[19] While a substance which we now know to be natural zinc sulphate was
known to Agricola (see note 11, p. 572), it is hardly possible that it
is referred to here. If green vitriol be dehydrated and powdered, it is
white.

[20] The processes involved by these "other" compounds are difficult to
understand, because of the lack of information given as to the method of
operation. It might be thought that these were five additional recipes
for cementing pastes, but an inspection of their internal composition
soon dissipates any such assumption, because, apart from the lack of
brickdust or some other similar necessary ingredient, they all contain
more or less sulphur. After describing a preliminary treatment of the
bullion by cupellation, the author says: "Then the silver is sprinkled
with two _unciae_ of that powdered compound and is stirred. Afterward it
is poured into another crucible ... and violently shaken. The rest is
performed according to the process I have already explained." As he has
already explained four or five parting processes, it is not very clear
to which one this refers. In fact, the whole of this discussion reads as
if he were reporting hearsay, for it lacks in every respect the infinite
detail of his usual descriptions. In any event, if the powder was
introduced into the molten bullion, the effect would be to form some
silver sulphides in a regulus of different composition depending upon
the varied ingredients of different compounds. The enriched bullion was
settled out in a "lump" and treated "as I have explained," which is not
clear.

[21] HISTORICAL NOTE ON PARTING GOLD AND SILVER. Although the earlier
Classics contain innumerable references to refining gold and silver,
there is little that is tangible in them, upon which to hinge the
metallurgy of parting the precious metals. It appears to us, however,
that some ability to part the metals is implied in the use of the
touchstone, for we fail to see what use a knowledge of the ratio of gold
and silver in bullion could have been without the power to separate
them. The touchstone was known to the Greeks at least as early as the
5th Century B.C. (see note 37, p. 252), and a part of Theophrastus'
statement (LXXVIII.) on this subject bears repetition in this
connection: "The nature of the stone which tries gold is also very
wonderful, as it seems to have the same power as fire; which is also a
test of that metal.... The trial by fire is by the colour and the
quantity lost by it, but that of the stone is made only by rubbing,"
etc. This trial by fire certainly implies a parting of the metals. It
has been argued from the common use of _electrum_--a gold-silver
alloy--by the Ancients, that they did not know how to part the two
metals or they would not have wasted gold in such a manner, but it seems
to us that the very fact that _electrum_ was a positive alloy (20% gold,
80% silver), and that it was deliberately made (Pliny XXXIII, 23) and
held of value for its supposed superior brilliancy to silver and the
belief that goblets made of it detected poison, is sufficient answer to
this.

To arrive by a process of elimination, we may say that in the Middle
Ages, between 1100 and 1500 A.D., there were known four methods of
parting these metals: _a_, parting by solution in nitric acid; _b_,
sulphurization of the silver in finely-divided bullion by heating it
with sulphur, and the subsequent removal of the silver sulphide in a
regulus by melting with copper, iron, or lead; _c_, melting with an
excess of antimony sulphide, and the direct conversion of the silver to
sulphide and its removal in a regulus; _d_, cementation of the
finely-divided bullion with salt, and certain necessary collateral
re-agents, and the separation of the silver by absorption into the
cement as silver chloride. Inasmuch as it can be clearly established
that mineral acids were unknown to the Ancients, we can eliminate that
method. Further, we may say at once that there is not, so far as has yet
been found, even a remote statement that could be applied to the
sulphide processes. As to cementation with salt, however, we have some
data at about the beginning of the Christian Era.

Before entering into a more detailed discussion of the history of
various processes, it may be useful, in a word, to fix in the mind of
the reader our view of the first authority on various processes, and his
period.

     (1) Separation by cementation with salt, Strabo (?) 63 B.C.-24
         A.D.; Pliny 23-79 A.D.

     (2) Separation by sulphur, Theophilus, 1150-1200 A.D.

     (3) Separation by nitric acid, Geber, prior to 14th Century.

     (4) Separation by antimony sulphide, Basil Valentine, end 14th
         Century, or _Probierbuechlein_, beginning 15th Century.

     (5) Separation by antimony sulphide and copper, or sulphur and
         copper, _Probierbuechlein_, beginning 15th Century.

     (6) Separation by cementation with saltpetre, Agricola, 1556.

     (7) Separation by sulphur and iron, Schlueter, 1738.

     (8) Separation by sulphuric acid, D'Arcet, 1802.

     (9) Separation by chloride gas, Thompson, 1833.

    (10) Separation electrolytically, latter part 19th Century.

PARTING BY CEMENTATION. The following passage from Strabo is of prime
interest as the first definite statement on parting of any kind (III, 2,
8): "That when they have melted the gold and purified it by means of a
kind of aluminous earth, the residue left is _electrum_. This, which
contains a mixture of silver and gold, being again subjected to the
fire, the silver is separated and the gold left (pure); for this metal
is easily dissipated and fat, and on this account gold is most easily
molten by straw, the flame of which is soft, and bearing a similarity
(to the gold) causes it easily to dissolve, whereas coal, besides
wasting a great deal, melts it too much, by reason of its vehemence, and
carries it off (in vapour)." This statement has provoked the liveliest
discussion, not only on account of the metallurgical interest and
obscurity, but also because of differences of view as to its
translation; we have given that of Mr. H. C. Hamilton (London, 1903). A
review of this discussion will be found in Percy's Metallurgy of Gold
and Silver, p. 399. That it refers to cementation at all hangs by a
slender thread, but it seems more nearly this than anything else.

Pliny (XXXIII, 25) is a little more ample: "(The gold) is heated with
double its weight of salt and thrice its weight of _misy_, and again
with two portions of salt and one of a stone which they call _schistos_.
The _virus_ is drawn out when these things are burnt together in an
earthen crucible, itself remaining pure and incorrupt, the remaining ash
being preserved in an earthen pot and mixed with water as a lotion for
_lichen_ (ring-worm) on the face." Percy (Metallurgy Silver and Gold, p.
398) rightly considers that this undoubtedly refers to the parting of
silver and gold by cementation with common salt. Especially as Pliny
further on states that with regard to _misy_, "In purifying gold they
mix it with this substance." There can be no doubt from the explanations
of Pliny and Dioscorides that _misy_ was an oxidized pyrite, mostly iron
sulphate. Assuming the latter case, then all of the necessary elements
of cementation, _i.e._, vitriol, salt, and an aluminous or silicious
element, are present.

The first entirely satisfactory evidence on parting is to be found in
Theophilus (12th Century), and we quote the following from Hendrie's
translation (p. 245): "Of Heating the Gold. Take gold, of whatsoever
sort it may be, and beat it until thin leaves are made in breadth three
fingers, and as long as you can. Then cut out pieces that are equally
long and wide and join them together equally, and perforate through all
with a fine cutting iron. Afterwards take two earthen pots proved in the
fire, of such size that the gold can lie flat in them, and break a tile
very small, or clay of the furnace burned and red, weigh it, powdered,
into two equal parts, and add to it a third part salt for the same
weight; which things being slightly sprinkled with urine, are mixed
together so that they may not adhere together, but are scarcely wetted,
and put a little of it upon a pot about the breadth of the gold, then a
piece of the gold itself, and again the composition, and again the gold,
which in the digestion is thus always covered, that gold may not be in
contact with gold; and thus fill the pot to the top and cover it above
with another pot, which you carefully lute round with clay, mixed and
beaten, and you place it over the fire, that it may be dried. In the
meantime compose a furnace from stones and clay, two feet in height, and
a foot and a half in breadth, wide at the bottom, but narrow at the top,
where there is an opening in the middle, in which project three long and
hard stones, which may be able to sustain the flame for a long time,
upon which you place the pots with the gold, and cover them with other
tiles in abundance. Then supply fire and wood, and take care that a
copious fire is not wanting for the space of a day and night. In the
morning taking out the gold, again melt, beat and place it in the
furnace as before. Again also, after a day and night, take it away and
mixing a little copper with it, melt it as before, and replace it upon
the furnace. And when you have taken it away a third time, wash and dry
it carefully, and so weighing it, see how much is wanting, then fold it
up and keep it."

The next mention is by Geber, of whose date and authenticity there is
great doubt, but, in any event, the work bearing his name is generally
considered to be prior to the 14th, although he has been placed as early
as the 8th Century. We quote from Russell's translation, pp. 17 and 224,
which we have checked with the Latin edition of 1542: "Sol, or gold, is
beaten into thin plates and with them and common salt very well prepared
lay upon lay in a vessel of calcination which set into the furnace and
calcine well for three days until the whole is subtily calcined. Then
take it out, grind well and wash it with vinegar, and dry it in the sun.
Afterwards grind it well with half its weight of cleansed
_sal-armoniac_; then set it to be dissolved until the whole be dissolved
into most clear water." Further on: "Now we will declare the way of
cementing. Seeing it is known to us that cement is very necessary in the
examen of perfection, we say it is compounded of inflammable things. Of
this kind are, all blackening, flying, penetrating, and burned things;
as is vitriol, _sal-armoniac_, _flos aeris_ (copper oxide scales) and
the ancient _fictile_ stone (earthen pots), and a very small quantity,
or nothing, of sulphur, and urine with like acute and penetrating
things. All these are impasted with urine and spread upon thin plates of
that body which you intend shall be examined by this way of probation.
Then the said plates must be laid upon a grate of iron included in an
earthen vessel, yet so as one touch not the other that the virtue of the
fire may have free and equal access to them. Thus the whole must be kept
in fire in a strong earthen vessel for the space of three days. But here
great caution is required that the plates may be kept but not melt."

Albertus Magnus (1205-1280) _De Mineralibus et Rebus Metallicis_, Lib.
IV, describes the process as follows:--"But when gold is to be purified
an earthen vessel is made like a cucurbit or dish, and upon it is placed
a similar vessel; and they are luted together with the tenacious lute
called by alchemists the lute of wisdom. In the upper vessel there are
numerous holes by which vapour and smoke may escape; afterwards the gold
in the form of short thin leaves is arranged in the vessel, the leaves
being covered consecutively with a mixture obtained by mixing together
soot, salt, and brick dust; and the whole is strongly heated until the
gold becomes perfectly pure and the base substances with which it was
mixed are consumed." It will be noted that salt is the basis of all
these cement compounds. We may also add that those of Biringuccio and
all other writers prior to Agricola were of the same kind, our author
being the first to mention those with nitre.

PARTING WITH NITRIC ACID. The first mention of nitric acid is in
connection with this purpose, and, therefore, the early history of this
reagent becomes the history of the process. Mineral acids of any kind
were unknown to the Greeks or Romans. The works of the Alchemists and
others from the 12th to the 15th Centuries, have been well searched by
chemical historians for indications of knowledge of the mineral acids,
and many of such suspected indications are of very doubtful order. In
any event, study of the Alchemists for the roots of chemistry is fraught
with the greatest difficulty, for not only is there the large ratio of
fraud which characterised their operations, but there is even the much
larger field of fraud which characterised the authorship and dates of
writing attributed to various members of the cult. The mention of
saltpetre by Roger Bacon (1214-94), and Albertus Magnus (1205-80), have
caused some strain to read a knowledge of mineral acids into their
works, but with doubtful result. Further, the Monk Theophilus
(1150-1200) is supposed to have mentioned products which would be
mineral acids, but by the most careful scrutiny of that work we have
found nothing to justify such an assertion, and it is of importance to
note that as Theophilus was a most accomplished gold and silver worker,
his failure to mention it is at least evidence that the process was not
generally known. The transcribed manuscripts and later editions of such
authors are often altered to bring them "up-to-date." The first mention
is in the work attributed to Geber, as stated above, of date prior to
the 14th Century. The following passage from his _De Inventione
Veritatis_ (Nuremberg edition, 1545, p. 182) is of interest:--"First
take one _libra_ of vitriol of Cyprus and one-half _libra_ of saltpetre
and one-quarter of alum of Jameni, extract the _aqua_ with the redness
of the alembic--for it is very solvative--and use as in the foregoing
chapters. This can be made acute if in it you dissolve a quarter of
sal-ammoniac, which dissolves gold, sulphur, and silver." Distilling
vitriol, saltpetre and alum would produce nitric acid. The addition of
sal-ammoniac would make _aqua regia_; Geber used this solvent
water--probably without being made "more acute"--to dissolve silver, and
he crystallized out silver nitrate. It would not be surprising to find
all the Alchemists subsequent to Geber mentioning acids. It will thus be
seen that even the approximate time at which the mineral-acids were
first made cannot be determined, but it was sometime previous to the
15th Century, probably not earlier than the 12th Century. Beckmann
(Hist. of Inventions II, p. 508) states that it appears to have been an
old tradition that acid for separating the precious metals was first
used at Venice by some Germans; that they chiefly separated the gold
from Spanish silver and by this means acquired great riches. Beckmann
considers that the first specific description of the process seems to be
in the work of William Budaeus (_De Asse_, 1516, III, p. 101), who
speaks of it as new at this time. He describes the operation of one, Le
Conte, at Paris, who also acquired a fortune through the method.
Beckmann and others have, however, entirely overlooked the early
_Probierbuechlein_. If our conclusions are correct that the first of
these began to appear at about 1510, then they give the first
description of inquartation. This book (see appendix) is made up of
recipes, like a cook-book, and four or five different recipes are given
for this purpose; of these we give one, which sufficiently indicates a
knowledge of the art (p. 39): "If you would part them do it this way:
Beat the silver which you suppose to contain gold, as thin as possible;
cut it in small pieces and place it in 'strong' water (_starkwasser_).
Put it on a mild fire till it becomes warm and throws up blisters or
bubbles. Then take it and pour off the water into a copper-bowl; let it
stand and cool. Then the silver settles itself round the copper bowl;
let the silver dry in the copper bowl, then pour the water off and melt
the silver in a crucible. Then take the gold also out of the glass
_kolken_ and melt it together." Biringuccio (1540, Book VI.) describes
the method, but with much less detail than Agricola. He made his acid
from alum and saltpetre and calls it _lacque forti_.

PARTING WITH SULPHUR. This process first appears in Theophilus
(1150-1200), and in form is somewhat different from that mentioned by
Agricola. We quote from Hendrie's Translation, p. 317, "How gold is
separated from silver. When you have scraped the gold from silver, place
this scraping in a small cup in which gold or silver is accustomed to be
melted, and press a small linen cloth upon it, that nothing may by
chance be abstracted from it by the wind of the bellows, and placing it
before the furnace, melt it; and directly lay fragments of sulphur in
it, according to the quantity of the scraping, and carefully stir it
with a thin piece of charcoal until its fumes cease; and immediately
pour it into an iron mould. Then gently beat it upon the anvil lest by
chance some of that black may fly from it which the sulphur has burnt,
because it is itself silver. For the sulphur consumes nothing of the
gold, but the silver only, which it thus separates from the gold, and
which you will carefully keep. Again melt this gold in the same small
cup as before, and add sulphur. This being stirred and poured out, break
what has become black and keep it, and do thus until the gold appear
pure. Then gather together all that black, which you have carefully
kept, upon the cup made from the bone and ash, and add lead, and so burn
it that you may recover the silver. But if you wish to keep it for the
service of niello, before you burn it add to it copper and lead,
according to the measure mentioned above, and mix with sulphur." This
process appears in the _Probierbuechlein_ in many forms, different
recipes containing other ingredients besides sulphur, such as salt,
saltpetre, sal-ammoniac, and other things more or less effective. In
fact, a series of hybrid methods between absolute melting with sulphur
and cementation with salt, were in use, much like those mentioned by
Agricola on p. 458.

PARTING WITH ANTIMONY SULPHIDE. The first mention of this process lies
either in Basil Valentine's "Triumphant Chariot of Antimony" or in the
first _Probierbuechlein_. The date to be assigned to the former is a
matter of great doubt. It was probably written about the end of the 15th
Century, but apparently published considerably later. The date of the
_Probierbuechlein_ we have referred to above. The statement in the
"Triumphal Chariot" is as follows (Waite's Translation, p. 117-118):
"The elixir prepared in this way has the same power of penetrating and
pervading the body with its purifying properties that antimony has of
penetrating and purifying gold.... This much, however, I have proved
beyond a possibility of doubt, that antimony not only purifies gold and
frees it from foreign matter, but it also ameliorates all other metals,
but it does the same for animal bodies." There are most specific
descriptions of this process in the other works attributed to Valentine,
but their authenticity is so very doubtful that we do not quote. The
_Probierbuechlein_ gives several recipes for this process, all to the
same metallurgical effect, of which we quote two: "How to separate
silver from gold. Take 1 part of golden silver, 1 part of _spiesglass_,
1 part copper, 1 part lead; melt them together in a crucible. When
melted pour into the crucible pounded sulphur and directly you have
poured it in cover it up with soft lime so that the fumes cannot escape,
and let it get cold and you will find your gold in a button. Put that
same in a pot and blow on it." "How to part gold and silver by melting
or fire. Take as much gold-silver as you please and granulate it; take 1
_mark_ of these grains, 1 _mark_ of powder; put them together in a
crucible. Cover it with a small cover, put it in the fire, and let it
slowly heat; blow on it gently until it melts; stir it all well together
with a stick, pour it out into a mould, strike the mould gently with a
knife so that the button may settle better, let it cool, then turn the
mould over, strike off the button and twice as much _spiesglas_ as the
button weighs, put them in a crucible, blow on it till it melts, then
pour it again into a mould and break away the button as at first. If you
want the gold to be good always add to the button twice as much
_spiesglass_. It is usually good gold in three meltings. Afterward take
the button, place it on a cupel, blow on it till it melts. And if it
should happen that the gold is covered with a membrane, then add a very
little lead, then it shines (_plickt_) and becomes clearer." Biringuccio
(1540) also gives a fairly clear exposition of this method. All the old
refiners varied the process by using mixtures of salt, antimony
sulphide, and sulphur, in different proportions, with and without lead
or copper; the net effect was the same. Later than Agricola these
methods of parting bullion by converting the silver into a sulphide and
carrying it off in a regulus took other forms. For instance, Schlueter
(_Huette-Werken_, Braunschweig, 1738) describes a method by which, after
the granulated bullion had been sulphurized by cementation with sulphur
in pots, it was melted with metallic iron. Lampadius (_Grundriss Einer
Allgemeinen Huettenkunde_, Goettingen, 1827) describes a treatment of the
bullion, sulphurized as above, with litharge, thus creating a
lead-silver regulus and a lead-silver-gold bullion which had to be
repeatedly put through the same cycle. The principal object of these
processes was to reduce silver bullion running low in gold to a ratio
acceptable for nitric acid treatment.

Before closing the note on the separation of gold and silver, we may add
that with regard to the three processes largely used to-day, the
separation by solution of the silver from the bullion by concentrated
sulphuric acid where silver sulphate is formed, was first described by
D'Arcet, Paris, in 1802; the separation by introducing chlorine gas into
the molten bullion and thus forming silver chlorides was first described
by Lewis Thompson in a communication to the Society of Arts, 1833, and
was first applied on a large scale by F. B. Miller at the Sydney Mint in
1867-70; we do not propose to enter into the discussion as to who is the
inventor of electrolytic separation.

[22] There were three methods of gilding practised in the Middle
Ages--the first by hammering on gold leaf; the second by laying a thin
plate of gold on a thicker plate of silver, expanding both together, and
fabricating the articles out of the sheets thus prepared; and the third
by coating over the article with gold amalgam, and subsequently driving
off the mercury by heat. Copper and iron objects were silver-plated by
immersing them in molten silver after coating with sal-ammoniac or
borax. Tinning was done in the same way.

[23] See note 12, p. 297, for complete discussion of amalgamation.

[24] These nine methods of separating gold from copper are based
fundamentally upon the sulphur introduced in each case, whereby the
copper is converted into sulphides and separated off as a matte. The
various methods are much befogged by the introduction of extraneous
ingredients, some of which serve as fluxes, while others would provide
metallics in the shape of lead or antimony for collection of the gold,
but others would be of no effect, except to increase the matte or slag.
Inspection will show that the amount of sulphur introduced in many
instances is in so large ratio that unless a good deal of volatilization
took place there would be insufficient metallics to collect the gold, if
it happened to be in small quantities. In a general way the auriferous
button is gradually impoverished in copper until it is fit for
cupellation with lead, except in one case where the final stage is
accomplished by amalgamation. The lore of the old refiners was much
after the order of that of modern cooks--they treasured and handed down
various efficacious recipes, and of those given here most can be found
in identical terms in the _Probierbuechlein_, some editions of which, as
mentioned before, were possibly fifty years before _De Re Metallica_.
This knowledge, no doubt, accumulated over long experience; but, so far
as we are aware, there is no description of sulphurizing copper for this
purpose prior to the publication mentioned.

[25] _Sal artificiosus_. The compound given under this name is of quite
different ingredients from the stock fluxes given in Book VII under the
same term. The method of preparation, no doubt, dehydrated this one; it
would, however, be quite effective for its purpose of sulphurizing the
copper. There is a compound given in the _Probierbuechlein_ identical
with this, and it was probably Agricola's source of information.

[26] Throughout the book the cupellation furnace is styled the _secunda
fornax_ (Glossary, _Treibeherd_). Except in one or two cases, where
there is some doubt as to whether the author may not refer to the second
variety of blast furnace, we have used "cupellation furnace." Agricola's
description of the actual operation of the old German cupellation is
less detailed than that of such authors as Schlueter (_Huette-Werken_,
Braunschweig, 1738) or Winkler (_Beschreibung der Freyberger Schmelz
Huttenprozesse_, Freyberg, 1837). The operation falls into four periods.
In the first period, or a short time after melting, the first scum--the
_abzug_--arises. This material contains most of the copper, iron, zinc,
or sulphur impurities in the lead. In the second period, at a higher
temperature, and with the blast turned on, a second scum arises--the
_abstrich_. This material contains most of the antimony and arsenical
impurities. In the third stage the litharge comes over. At the end of
this stage the silver brightens--"_blicken_"--due to insufficient
litharge to cover the entire surface. Winkler gives the following
average proportion of the various products from a charge of 100
_centners_:--

  _Abzug_               2      _centners_, containing 64% lead
  _Abstrich_            5-1/2     "           "       73%  "
  _Herdtplei_          21-1/2     "           "       60%  "
  Impure litharge      18         "           "       85%  "
  Litharge             66         "           "       89%  "
                      ---
            Total     113 _centners_

He estimates the lead loss at from 8% to 15%, and gives the average
silver contents of _blicksilber_ as about 90%. Many analyses of the
various products may be found in Percy (Metallurgy of Lead, pp.
198-201), Schnabel and Lewis (Metallurgy, Vol. I, p. 581); but as they
must vary with every charge, a repetition of them here is of little
purpose.

HISTORICAL NOTE ON CUPELLATION. The cupellation process is of great
antiquity, and the separation of silver from lead in this manner very
probably antedates the separation of gold and silver. We can be certain
that the process has been used continuously for at least 2,300 years,
and was only supplanted in part by Pattinson's crystallization process
in 1833, and further invaded by Parks' zinc method in 1850, and during
the last fifteen years further supplanted in some works by electrolytic
methods. However, it yet survives as an important process. It seems to
us that there is no explanation possible of the recovery of the large
amounts of silver possessed from the earliest times, without assuming
reduction of that metal with lead, and this necessitates cupellation. If
this be the case, then cupellation was practised in 2500 B.C. The
subject has been further discussed on p. 389. The first direct evidence
of the process, however, is from the remains at Mt. Laurion (note 6, p.
27), where the period of greatest activity was at 500 B.C., and it was
probably in use long before that time. Of literary evidences, there are
the many metaphorical references to "fining silver" and "separating
dross" in the Bible, such as Job (XXVIII, 1), Psalms (XII, 6, LXVI, 10),
Proverbs (XVII, 3). The most certain, however, is Jeremiah (VI, 28-30):
"They are all brass [_sic_] and iron; they are corrupters. The bellows
are burned, the lead is consumed in the fire, the founder melteth in
vain; for the wicked are not plucked away. Reprobate silver shall men
call them." Jeremiah lived about 600 B.C. His contemporary Ezekiel
(XXII, 18) also makes remark: "All they are brass and tin and iron and
lead in the midst of the furnace; they are even the dross of the
silver." Among Greek authors Theognis (6th century B.C.) and Hippocrates
(5th century B.C.) are often cited as mentioning the refining of gold
with lead, but we do not believe their statements will stand this
construction without strain. Aristotle (Problems XXIV, 9) makes the
following remark, which has been construed not only as cupellation, but
also as the refining of silver in "tests." "What is the reason that
boiling water does not leap out of the vessel ... silver also does this
when it is purified. Hence those whose office it is in the silversmiths'
shops to purify silver, derive gain by appropriation to themselves of
the sweepings of silver which leap out of the melting-pot."

The quotation of Diodorus Siculus from Agatharchides (2nd century B.C.)
on gold refining with lead and salt in Egypt we give in note 8, p. 279.
The methods quoted by Strabo (63 B.C.-24 A.D.) from Polybius (204-125
B.C.) for treating silver, which appear to involve cupellation, are
given in note 8, p. 281. It is not, however, until the beginning of the
Christian era that we get definite literary information, especially with
regard to litharge, in Dioscorides and Pliny. The former describes many
substances under the terms _scoria_, _molybdaena_, _scoria argyros_ and
_lithargyros_, which are all varieties of litharge. Under the latter
term he says (V, 62): "One kind is produced from a lead sand
(concentrates?), which has been heated in the furnaces until completely
fused; another (is made) out of silver; another from lead. The best is
from Attica, the second (best) from Spain; after that the kinds made in
Puteoli, in Campania, and at Baia in Sicily, for in these places it is
mostly produced by burning lead plates. The best of all is that which is
a bright golden colour, called _chrysitis_, that from Sicily (is called)
_argyritis_, that made from silver is called _lauritis_." Pliny refers
in several passages to litharge (_spuma argenti_) and to what is
evidently cupellation, (XXXIII, 31): "And this the same agency of fire
separates part into lead, which floats on the silver like oil on water"
(XXXIV, 47). "The metal which flows liquid at the first melting is
called _stannum_, the second melting is silver; that which remains in
the furnace is _galena_, which is added to a third part of the ore. This
being again melted, produced lead with a deduction of two-ninths."
Assuming _stannum_ to be silver-lead alloy, and _galena_ to be
_molybdaena_, and therefore litharge, this becomes a fairly clear
statement of cupellation (see note 23, p. 392). He further states
(XXXIII, 35): "There is made in the same mines what is called _spuma
argenti_ (litharge). There are three varieties of it; the best, known as
_chrysitis_; the second best, which is called _argyritis_; and a third
kind, which is called _molybditis_. And generally all these colours are
to be found in the same tubes (see p. 480). The most approved kind is
that of Attica; the next, that which comes from Spain. _Chrysitis_ is
the product from the ore itself; _argyritis_ is made from the silver,
and _molybditis_ is the result of smelting of lead, which is done at
Puteoli, and from this has its name. All three are made as the material
when smelted flows from an upper crucible into a lower one. From this
last it is raised with an iron bar, and is then twirled round in the
flames in order to make it less heavy (made in tubes). Thus, as may be
easily perceived from the name, it is in reality the _spuma_ of a
boiling substance--of the future metal, in fact. It differs from slag in
the same way that the scum of a liquid differs from the lees, the one
being purged from the material while purifying itself, the other an
excretion of the metal when purified."

The works of either Theophilus (1150-1200 A.D.) or Geber (prior to the
14th century) are the first where adequate description of the cupel
itself can be found. The uncertainty of dates renders it difficult to
say which is earliest. Theophilus (Hendrie's Trans., p. 317) says: "How
gold is separated from copper: But if at any time you have broken copper
or silver-gilt vessels, or any other work, you can in this manner
separate the gold. Take the bones of whatever animal you please, which
(bones) you may have found in the street, and burn them, being cold,
grind them finely, and mix with them a third part of beechwood ashes,
and make cups as we have mentioned above in the purification of silver;
you will dry these at the fire or in the sun. Then you carefully scrape
the gold from the copper, and you will fold this scraping in lead beaten
thin, and one of these cups being placed in the embers before the
furnace, and now become warm, you place in this fold of lead with the
scraping, and coals being heaped upon it you will blow it. And when it
has become melted, in the same manner as silver is accustomed to be
purified, sometimes by removing the embers and by adding lead, sometimes
by re-cooking and warily blowing, you burn it until, the copper being
entirely absorbed, the gold may appear pure."

We quote Geber from the Nuremberg edition of 1545, p. 152: "Now we
describe the method of this. Take sifted ashes or _calx_, or the powder
of the burned bones of animals, or all of them mixed, or some of them;
moisten with water, and press it with your hand to make the mixture firm
and solid, and in the middle of this bed make a round solid crucible and
sprinkle a quantity of crushed glass. Then permit it to dry. When it is
dry, place into the crucible that which we have mentioned which you
intend to test. On it kindle a strong fire, and blow upon the surface of
the body that is being tested until it melts, which, when melted, piece
after piece of lead is thrown upon it, and blow over it a strong flame.
When you see it agitated and moved with strong shaking motion it is not
pure. Then wait until all of the lead is exhaled. If it vanishes and
does not cease its motion it is not purified. Then again throw lead and
blow again until the lead separates. If it does not become quiet again,
throw in lead and blow on it until it is quiet and you see it bright and
clear on the surface."

Cupellation is mentioned by most of the alchemists, but as a
metallurgical operation on a large scale the first description is by
Biringuccio in 1540.

[27] In Agricola's text this is "first,"--obviously an error.

[28] The Roman _sextarius_ was about a pint.

[29] This sentence continues, _Ipsa vero media pars praeterea digito_,
to which we are unable to attribute any meaning.

[30] _Thus_, or _tus_--"incense."

[31] One _centumpondium_, Roman, equals about 70.6 lbs. avoirdupois; one
_centner_, old German, equals about 114.2 lbs. avoirdupois. Therefore,
if German weights are meant, the maximum charge would be about 5.7 short
tons; if Roman weights, about 3.5 short tons.

[32] See description, p. 269.

[33] _Stannum_, as a term for lead-silver alloys, is a term which
Agricola (_De Natura Fossilium_, pp. 341-3) adopted from his views of
Pliny. In the _Interpretatio_ and the Glossary he gives the German
equivalent as _werk_, which would sufficiently identify his meaning were
it not obvious from the context. There can be little doubt that Pliny
uses the term for lead alloys, but it had come into general use for tin
before Agricola's time. The Roman term was _plumbum candidum_, and as a
result of Agricola's insistence on using it and _stannum_ in what he
conceived was their original sense, he managed to give considerable
confusion to mineralogic literature for a century or two. The passages
from Pliny, upon which he bases his use, are (XXXIV, 47): "The metal
which flows liquid at the first melting in the furnace is called
_stannum_, the second melting is silver," etc. (XXXIV, 48): "When copper
vessels are coated with _stannum_ they produce a less disagreeable
flavour, and it prevents verdigris. It is also remarkable that the
weight is not increased.... At the present day a counterfeit _stannum_
is made by adding one-third of white copper to tin. It is also made in
another way, by mixing together equal parts of tin and lead; this last
is called by some _argentarium_.... There is also a composition called
_tertiarium_, a mixture of two parts of lead and one of tin. Its price
is twenty _denarii_ per pound, and it is used for soldering pipes.
Persons still more dishonest mix together equal parts of _tertiarium_
and tin, and calling the compound _argentarium_, when it is melted coat
articles with it." Although this last passage probably indicates that
_stannum_ was a tin compound, yet it is not inconsistent with the view
that the genuine _stannum_ was silver-lead, and that the counterfeits
were made as stated by Pliny. At what period the term _stannum_ was
adopted for tin is uncertain. As shown by Beckmann (Hist. of Inventions
II, p. 225), it is used as early as the 6th century in occasions where
tin was undoubtedly meant. We may point out that this term appears
continuously in the official documents relating to Cornish tin mining,
beginning with the report of William de Wrotham in 1198.

[34] The Latin term for litharge is _spuma argenti_, spume of silver.

[35] Pliny, XXXIII, 35. This quotation is given in full in the footnote
p. 466. Agricola illustrates these "tubes" of litharge on p. 481.

[36] Assuming Roman weights, three _unciae_ and three _drachmae_ per
_centumpondium_ would be about 82 ozs., and the second case would equal
about 85 ozs. per short ton.

[37] Agricola uses throughout _De Re Metallica_ the term _molybdaena_
for this substance. It is obvious from the context that he means
saturated furnace bottoms--the _herdpley_ of the old German
metallurgists--and, in fact, he himself gives this equivalent in the
_Interpretatio_, and describes it in great detail in _De Natura
Fossilium_ (p. 353). The derivatives coined one time and another from
the Greek _molybdos_ for lead, and their applications, have resulted in
a stream of wasted ink, to which we also must contribute. Agricola chose
the word _molybdaena_ in the sense here used from his interpretation of
Pliny. The statements in Pliny are a hopeless confusion of _molybdaena_
and _galena_. He says (XXXIII, 35): "There are three varieties of it
(litharge)--the best-known is _chrysitis_; the second best is called
_argyritis_; and a third kind is called _molybditis_.... _Molybditis_ is
the result of the smelting of lead.... Some people make two kinds of
litharge, which they call _scirerytis_ and _peumene_; and a third
variety being _molybdaena_, will be mentioned with lead." (XXXIV, 53):
"_Molybdaena_, which in another place I have called _galena_, is an ore
of mixed silver and lead. It is considered better in quality the nearer
it approaches to a golden colour and the less lead there is in it; it is
also friable and moderately heavy. When it is boiled with oil it becomes
liver-coloured, adheres to the gold and silver furnaces, and in this
state it is called _metallica_." From these two passages it would seem
that _molybdaena_, a variety of litharge, might quite well be
hearth-lead. Further (in XXXIV, 47), he says: "The metal which flows
liquid at the first melting in the furnace is called _stannum_, at the
second melting is silver, that which remains in the furnace is
_galena_." If we still maintain that _molybdaena_ is hearth-lead, and
_galena_ is its equivalent, then this passage becomes clear enough, the
second melting being cupellation. The difficulty with Pliny, however,
arises from the passage (XXXIII, 31), where, speaking of silver ore, he
says: "It is impossible to melt it except with lead ore, called
_galena_, which is generally found next to silver veins." Agricola
(_Bermannus_, p. 427, &c.), devotes a great deal of inconclusive
discussion to an attempt to reconcile this conflict of Pliny, and also
that of Dioscorides. The probable explanation of this conflict arises in
the resemblance of cupellation furnace bottoms to lead carbonates, and
the native _molybdaena_ of Dioscorides; and some of those referred to by
Pliny may be this sort of lead ores. In fact, in one or two places in
Book IX, Agricola appears to use the term in this sense himself. After
Agricola's time the term _molybdaenum_ was applied to substances
resembling lead, such as graphite, and what we now know as _molybdenite_
(_MoS_{2}_). Some time in the latter part of the 18th century, an
element being separated from the latter, it was dubbed _molybdenum_, and
confusion was five times confounded.

[38] Agricola here refers to the German word used in this connection,
_i.e._, _hundt_, a dog.

[39] If Agricola means the German _centner_, this charge would be from
about 4.6 to 5.7 short tons. If he is using Roman weights, it would be
from about 3 to 3.7 short tons.

[40] The refining of silver in "tests" (Latin _testa_) is merely a
second cupellation, with greater care and under stronger blast. Stirring
the mass with an iron rod serves to raise the impurities which either
volatilize as litharge or, floating to the edges, are absorbed into the
"test." The capacity of the tests, from 15 _librae_ to 50 _librae_,
would be from about 155 to 515 ozs. Troy.

[41] A _drachma_ of impurities in a _bes_, would be one part in 64, or
984.4 fine. A loss of a _sicilicus_ of silver to the _bes_, would be one
part in 32, or about 3.1%; three _drachmae_ would equal 4.7%, and half
an _uncia_ 6.2%, or would indicate that the original bullion had a
fineness in the various cases of about 950, 933, and 912.

[42] _Praefectus Regis_.




BOOK XI.


Different methods of parting gold from silver, and, on the other hand,
silver from gold, were discussed in the last book; also the separation
of copper from the latter, and further, of lead from gold as well as
from silver; and, lastly, the methods for refining the two precious
metals. Now I will speak of the methods by which silver must be
separated from copper, and likewise from iron.[1]

[Illustration 493 (Building Plan for Refinery): Six long walls: A--The
first. B--The first part of the second. C--The further part of the
second. D--The third. E--The fourth. F--The fifth. G--The sixth.
Fourteen transverse walls: H--The first. I--The second. K--The third.
L--The fourth. M--The fifth. N--The sixth. O--The seventh. P--The
eighth. Q--The ninth. R--The tenth. S--The eleventh. T--The twelfth.
V--The thirteenth. X--The fourteenth.]

The _officina_, or the building necessary for the purposes and use of
those who separate silver from copper, is constructed in this manner.
First, four long walls are built, of which the first, which is parallel
with the bank of a stream, and the second, are both two hundred and
sixty-four feet long. The second, however, stops at one hundred and
fifty-one feet, and after, as it were, a break for a length of
twenty-four feet, it continues again until it is of a length equal to
the first wall. The third wall is one hundred and twenty feet long,
starting at a point opposite the sixty-seventh foot of the other walls,
and reaching to their one hundred and eighty-sixth foot. The fourth
wall is one hundred and fifty-one feet long. The height of each of these
walls, and likewise of the other two and of the transverse walls, of
which I will speak later on, is ten feet, and the thickness two feet and
as many palms. The second long wall only is built fifteen feet high,
because of the furnaces which must be built against it. The first long
wall is distant fifteen feet from the second, and the third is distant
the same number of feet from the fourth, but the second is distant
thirty-nine feet from the third. Then transverse walls are built, the
first of which leads from the beginning of the first long wall to the
beginning of the second long wall; and the second transverse wall from
the beginning of the second long wall to the beginning of the fourth
long wall, for the third long wall does not reach so far. Then from the
beginning of the third long wall are built two walls--the one to the
sixty-seventh foot of the second long wall, the other to the same point
in the fourth long wall. The fifth transverse wall is built at a
distance of ten feet from the fourth transverse wall toward the second
transverse wall; it is twenty feet long, and starts from the fourth
long wall. The sixth transverse wall is built also from the fourth long
wall, at a point distant thirty feet from the fourth transverse wall,
and it extends as far as the back of the third long wall. The seventh
transverse wall is constructed from the second long wall, where this
first leaves off, to the third long wall; and from the back of the third
long wall the eighth transverse wall is built, extending to the end of
the fourth long wall. Then the fifth long wall is built from the seventh
transverse wall, starting at a point nineteen feet from the second long
wall; it is one hundred and nine feet in length; and at a point
twenty-four feet along it, the ninth transverse wall is carried to the
third end of the second long wall, where that begins again. The tenth
transverse wall is built from the end of the fifth long wall, and leads
to the further end of the second long wall; and from there the eleventh
transverse wall leads to the further end of the first long wall. Behind
the fifth long wall, and five feet toward the third long wall, the sixth
long wall is built, leading from the seventh transverse wall; its length
is thirty-five feet, and from its further end the twelfth transverse
wall is built to the third long wall, and from it the thirteenth
transverse wall is built to the fifth long wall. The fourteenth
transverse wall divides into equal parts the space which lies between
the seventh transverse wall and the twelfth.

The length, height, breadth, and position of the walls are as above.
Their archways, doors, and openings are made at the same time that the
walls are built. The size of these and the way they are made will be
much better understood hereafter. I will now speak of the furnace hoods
and of the roofs. The first side[2] of the hood stands on the second
long wall, and is similar in every respect to those whose structure I
explained in Book IX, when I described the works in whose furnaces are
smelted the ores of gold, silver, and copper. From this side of the hood
a roof, which consists of burnt tiles, extends to the first long wall;
and this part of the building contains the bellows, the machinery for
compressing them, and the instruments for inflating them. In the middle
space, which is situated between the second and third transverse walls,
an upright post eight feet high and two feet thick and wide, is erected
on a rock foundation, and is distant thirteen feet from the second long
wall. On that upright post, and in the second transverse wall, which has
at that point a square hole two feet high and wide, is placed a beam
thirty-four feet and a palm long. Another beam, of the same length,
width, and thickness, is fixed on the same upright post and in the third
transverse wall. The heads of those two beams, where they meet, are
joined together with iron staples. In a similar manner another post is
erected, at a distance of ten feet from the first upright post in the
direction of the fourth wall, and two beams are laid upon it and into
the same walls in a similar way to those I have just now described. On
these two beams and on the fourth long wall are fixed seventeen
cross-beams, forty-three feet and three palms long, a foot wide, and
three palms thick; the first of these is laid upon the second transverse
wall, the last lies along the third and fourth transverse walls; the
rest are set in the space between them. These cross-beams are three feet
apart one from the other.

In the ends of these cross-beams, facing the second long wall, are
mortised the ends of the same number of rafters reaching to those
timbers which stand upright on the second long wall, and in this manner
is made the inclined side of the hood in a similar way to the one
described in Book IX. To prevent this from falling toward the vertical
wall of the hood, there are iron rods securing it, but only a few,
because the four brick chimneys which have to be built in that space
partly support it. Twelve feet back are likewise mortised into the
cross-beams, which lie upon the two longitudinal beams and the fourth
long wall, the lower ends of as many rafters, whose upper ends are
mortised into the upper ends of an equal number of similar rafters,
whose lower ends are mortised to the ends of the beams at the fourth
long wall. From the first set of rafters[4] to the second set of rafters
is a distance of twelve feet, in order that a gutter may be well placed
in the middle space. Between these two are again erected two sets of
rafters, the lower ends of which are likewise mortised into the beams,
which lie on the two longitudinal beams and the fourth long wall, and
are interdistant a cubit. The upper ends of the ones fifteen feet long
rest on the backs of the rafters of the first set; the ends of the
others, which are eighteen feet long, rest on the backs of the rafters
of the second set, which are longer; in this manner, in the middle of
the rafters, is a sub-structure. Upon each alternate cross-beam which is
placed upon the two longitudinal beams and the fourth long wall is
erected an upright post, and that it may be sufficiently firm it is
strengthened by means of a slanting timber. Upon these posts is laid a
long beam, upon which rests one set of middle rafters. In a similar
manner the other set of middle rafters rests on a long beam which is
placed upon other posts. Besides this, two feet above every cross-beam,
which is placed on the two longitudinal beams and the fourth long wall,
is placed a tie-beam which reaches from the first set of middle rafters
to the second set of middle rafters; upon the tie-beams is placed a
gutter hollowed out from a tree. Then from the back of each of the first
set of middle rafters a beam six feet long reaches almost to the gutter;
to the lower end of this beam is attached a piece of wood two feet long;
this is repeated with each rafter of the first set of middle rafters.
Similarly from the back of each rafter of the second set of middle
rafters a little beam, seven feet long, reaches almost to the gutter; to
the lower end of it is likewise attached a short piece of wood; this is
repeated on each rafter of the second set of middle rafters. Then in the
upper part, to the first and second sets of principal rafters are
fastened long boards, upon which are fixed the burnt tiles; and in the
same manner, in the middle part, they are fastened to the first and
second sets of middle rafters, and at the lower part to the little beams
which reach from each rafter of the first and second set of middle
rafters almost to the gutter; and, finally, to the little boards
fastened to the short pieces of wood are fixed shingles of pine-wood
extending into the gutter, so that the violent rain or melted snow may
not penetrate into the building. The substructures in the interior which
support the second set of rafters, and those on the opposite side which
support the third, being not unusual, I need not explain.

In that part of the building against the second long wall are the
furnaces, in which exhausted liquation cakes which have already been
"dried" are smelted, that they may recover once again the appearance and
colour of copper, inasmuch as they really are copper. The remainder of
the room is occupied by the passage which leads from the door to the
furnaces, together with two other furnaces, in one of which the whole
cakes of copper are heated, and in the other the exhausted liquation
cakes are "dried" by the heat of the fire.

Likewise, in the room between the third and seventh[5] transverse walls,
two posts are erected on rock foundation; both of them are eight feet
high and two feet wide and thick. The one is at a distance of thirteen
feet from the second long wall; the other at the same distance from the
third long wall; there is a distance of thirteen feet between them. Upon
these two posts and upon the third transverse wall are laid two
longitudinal beams, forty-one feet and one palm long, and two feet wide
and thick. Two other beams of the same length, width, and thickness are
laid upon the upright posts and upon the seventh transverse wall, and
the heads of the two long beams, where they meet, are joined with iron
staples. On these longitudinal beams are again placed twenty-one
transverse beams, thirteen feet long, a foot wide, and three palms
thick, of which the first is set on the third transverse wall, and the
last on the seventh transverse wall; the rest are laid in the space
between these two, and they are distant from one another three feet.
Into the ends of the transverse beams which face the second long wall,
are mortised the ends of the same number of rafters erected toward the
upright posts which are placed upon the second long wall, and in this
manner is made the second inclined side wall of the hood. Into the ends
of the transverse beams facing the third long wall, are mortised the
ends of the same number of rafters rising toward the rafters of the
first inclined side of the second hood, and in this manner is made the
other inclined side of the second hood. But to prevent this from falling
in upon the opposite inclined side of the hood, and that again upon the
opposite vertical one, there are many iron rods reaching from some of
the rafters to those opposite them; and this is also prevented in part
by means of a few tie-beams, extending from the back of the rafters to
the back of those which are behind them. These tie-beams are two palms
thick and wide, and have holes made through them at each end; each of
the rafters is bound round with iron bands three digits wide and half a
digit thick, which hold together the ends of the tie-beams of which I
have spoken; and so that the joints may be firm, an iron nail, passing
through the plate on both sides, is driven through the holes in the ends
of the beams. Since one weight counter-balances another, the rafters on
the opposite hoods cannot fall. The tie-beams and middle posts which
have to support the gutters and the roof, are made in every particular
as I stated above, except only that the second set of middle rafters are
not longer than the first set of middle rafters, and that the little
beams which reach from the back of each rafter of the second set of
middle rafters nearly to the gutter are not longer than the little beams
which reach from the back of each rafter of the first set of middle
rafters almost to the gutter. In this part of the building, against the
second long wall, are the furnaces in which copper is alloyed with lead,
and in which "slags" are re-smelted. Against the third long wall are the
furnaces in which silver and lead are liquated from copper. The interior
is also occupied by two cranes, of which one deposits on the ground the
cakes of copper lifted out of the moulding pans; the other lifts them
from the ground into the second furnace.

On the third and the fourth long walls are set twenty-one beams eighteen
feet and three palms long. In mortises in them, two feet behind the
third long wall, are set the ends of the same number of rafters erected
opposite to the rafters of the other inclined wall of the second furnace
hood, and in this manner is made the third inclined wall, exactly
similar to the others. The ends of as many rafters are mortised into
these beams where they are fixed in the fourth long wall; these rafters
are erected obliquely, and rest against the backs of the preceding ones
and support the roof, which consists entirely of burnt tiles and has the
usual substructures. In this part of the building there are two rooms,
in the first of which the cakes of copper, and in the other the cakes of
lead, are stored.

In the space enclosed between the ninth and tenth transverse walls and
the second and fifth long walls, a post twelve feet high and two feet
wide and thick is erected on a rock foundation; it is distant thirteen
feet from the second long wall, and six from the fifth long wall. Upon
this post and upon the ninth transverse wall is laid a beam thirty-three
feet and three palms long, and two palms wide and thick. Another beam,
also of the same length, width and thickness, is laid upon the same post
and upon the tenth transverse wall, and the ends of these two beams
where they meet are joined by means of iron staples. On these beams and
on the fifth long wall are placed ten cross-beams, eight feet and three
palms long, the first of which is placed on the ninth transverse wall,
the last on the tenth, the remainder in the space between them; they are
distant from one another three feet. Into the ends of the cross-beams
facing the second long wall, are mortised the ends of the same number of
rafters inclined toward the posts which stand vertically upon the second
long wall. This, again, is the manner in which the inclined side of the
furnace hood is made, just as with the others; at the top where the
fumes are emitted it is two feet distant from the vertical side. The
ends of the same number of rafters are mortised into the cross-beams,
where they are set in the fifth long wall; each of them is set up
obliquely and rests against the back of one of the preceding set; they
support the roof, made of burnt tiles. In this part of the building,
against the second long wall, are four furnaces in which lead is
separated from silver, together with the cranes by means of which the
domes are lifted from the crucibles.

In that part of the building which lies between the first long wall and
the break in the second long wall, is the stamp with which the copper
cakes are crushed, and the four stamps with which the accretions that
are chipped off the walls of the furnace are broken up and crushed to
powder, and likewise the bricks on which the exhausted liquation cakes
of copper are stood to be "dried." This room has the usual roof, as also
has the space between the seventh transverse wall and the twelfth and
thirteenth transverse walls.

[Illustration 499 (Hearths for melting lead cakes): A--Hearth. B--Rocks
sunk into the ground. C--Walls which protect the fourth long wall from
damage by fire. D--Dipping-pot. E--Masses of lead. F--Trolley. G--Its
wheels. H--Crane. I--Tongs. K--Wood. L--Moulds. M--Ladle. N--Pick.
O--Cakes.]

At the sides of these rooms are the fifth, the sixth, and the third long
walls. This part of the building is divided into two parts, in the first
of which stand the little furnaces in which the artificer assays metals;
and the bone ash, together with the other powders, are kept here. In the
other room is prepared the powder from which the hearths and the
crucibles of the furnaces are made. Outside the building, at the back of
the fourth long wall, near the door to the left as you enter, is a
hearth in which smaller masses of lead are melted from large ones, that
they may be the more easily weighed; because the masses of lead, just as
much as the cakes of copper, ought to be first prepared so that they can
be weighed, and a definite weight can be melted and alloyed in the
furnaces. To begin with, the hearth in which the masses of lead are
liquefied is six feet long and five wide; it is protected on both sides
by rocks partly sunk into the earth, but a palm higher than the hearth,
and it is lined in the inside with lute. It slopes toward the middle and
toward the front, in order that the molten lead may run down and flow
out into the dipping-pot. There is a wall at the back of the hearth
which protects the fourth long wall from damage by the heat; this wall,
which is made of bricks and lute, is four feet high, three palms thick,
and five feet long at the bottom, and at the top three feet and two
palms long; therefore it narrows gradually, and in the upper part are
laid seven bricks, the middle ones of which are set upright, and the end
ones inclined; they are all thickly coated with lute. In front of the
hearth is a dipping-pot, whose pit is a foot deep, and a foot and three
palms wide at the top, and gradually narrows. When the masses of lead
are to be melted, the workman first places the wood in the hearth so
that one end of each billet faces the wall, and the other end the
dipping-pot. Then, assisted by other workmen, he pushes the mass of lead
forward with crowbars on to a low trolley, and draws it to the crane.
The trolley consists of planks fastened together, is two and one-half
feet wide and five feet long, and has two small iron axles, around which
at each end revolve small iron wheels, two palms in diameter and as many
digits wide. The trolley has a tongue, and attached to this is a rope,
by which it is drawn to the crane. The crane is exactly similar to those
in the second part of the works, except that the crane-arm is not so
long. The tongs in whose jaws[6] the masses of lead are seized, are two
feet a palm and two digits long; both of the jaws, when struck with a
hammer, impinge upon the mass and are driven into it. The upper part of
both handles of the tongs are curved back, the one to the right, the
other to the left, and each handle is engaged in one of the lowest links
of two short chains, which are three links long. The upper links are
engaged in a large round ring, in which is fixed the hook of a chain let
down from the pulley of the crane-arm. When the crank of the crane is
turned, the mass is lifted and is carried by the crane-arm to the hearth
and placed on the wood. The workmen wheel up one mass after another and
place them in a similar manner on the wood of the hearth; masses which
weigh a total of about a hundred and sixty _centumpondia_[7] are usually
placed upon the wood and melted at one time. Then a workman throws
charcoal on the masses, and all are made ready in the evening. If he
fears that it may rain, he covers it up with a cover, which may be moved
here and there; at the back this cover has two legs, so that the rain
which it collects may flow down the slope on to the open ground. Early
in the morning of the following day, he throws live coals on the
charcoal with a shovel, and by this method the masses of lead melt, and
from time to time charcoal is added. The lead, as soon as it begins to
run into the dipping-pot, is ladled out with an iron ladle into copper
moulds such as the refiners generally use. If it does not cool
immediately he pours water over it, and then sticks the pointed pick
into it and pulls it out. The pointed end of the pick is three palms
long and the round end is two digits long. It is necessary to smear the
moulds with a wash of lute, in order that, when they have been turned
upside down and struck with the broad round end of the pick, the cakes
of lead may fall out easily. If the moulds are not washed over with the
lute, there is a risk that they may be melted by the lead and let it
through. Others take hold of a billet of wood with their left hand, and
with the heavy lower end of it they pound the mould, and with the right
hand they stick the point of the pick into the cake of lead, and thus
pull it out. Then immediately the workman pours other lead into the
empty moulds, and this he does until the work of melting the lead is
finished. When the lead is melted, something similar to litharge is
produced; but it is no wonder that it should be possible to make it in
this case, when it used formerly to be produced at Puteoli from lead
alone when melted by a fierce fire in the cupellation furnace.[8]
Afterward these cakes of lead are carried into the lead store-room.

[Illustration 501 (Stamp-mill for breaking copper cakes): A--Block of
wood. B--Upright posts. C--Transverse beams. D--Head of the stamp.
E--Its tooth. F--The hole in the stamp-stem. G--Iron bar. H--Masses of
lead. I--The bronze saddle. K--Axle. L--Its arms. M--Little iron axle.
N--Bronze pipe.]

The cakes of copper, put into wheelbarrows, are carried into the third
part of the building, where each is laid upon a saddle, and is broken up
by the impact of successive blows from the iron-shod stamp. This machine
is made by placing upon the ground a block of oak, five feet long and
three feet wide and thick; it is cut out in the middle for a length of
two feet and two palms, a width of two feet, and a depth of three palms
and two digits, and is open in front; the higher part of it is at the
back, and the wide part lies flat in the block. In the middle of it is
placed a bronze saddle. Its base is a palm and two digits wide, and is
planted between two masses of lead, and extends under them to a depth of
a palm on both sides. The whole saddle is three palms and two digits
wide, a foot long, and two palms thick. Upon each end of the block
stands a post, a cubit wide and thick, the upper end of which is
somewhat cut away and is mortised into the beams of the building. At a
height of four feet and two digits above the block there are joined to
the posts two transverse beams, each of which is three palms wide and
thick; their ends are mortised into the upright posts, and holes are
bored through them; in the holes are driven iron claves, horned in front
and so driven into the post that one of the horns of each points upward
and the other downward; the other end of each clavis is perforated, and
a wide iron wedge is inserted and driven into the holes, and thus holds
the transverse beams in place. These transverse beams have in the middle
a square opening three palms and half a digit wide in each direction,
through which the iron-shod stamp passes. At a height of three feet and
two palms above these transverse beams there are again two beams of the
same kind, having also a square opening and holding the same stamp. This
stamp is square, eleven feet long, three palms wide and thick; its iron
shoe is a foot and a palm long; its head is two palms long and wide, a
palm two digits thick at the top, and at the bottom the same number of
digits, for it gradually narrows. But the tail is three palms long;
where the head begins is two palms wide and thick, and the further it
departs from the same the narrower it becomes. The upper part is
enclosed in the stamp-stem, and it is perforated so that an iron bolt
may be driven into it; it is bound by three rectangular iron bands, the
lowest of which, a palm wide, is between the iron shoe and the head of
the stamp; the middle band, three digits wide, follows next and binds
round the head of the stamp, and two digits above is the upper one,
which is the same number of digits wide. At a distance of two feet and
as many digits above the lowest part of the iron shoe, is a rectangular
tooth, projecting from the stamp for a distance of a foot and a palm; it
is two palms thick, and when it has extended to a distance of six digits
from the stamp it is made two digits narrower. At a height of three
palms upward from the tooth there is a round hole in the middle of the
stamp-stem, into which can be thrust a round iron bar two feet long and
a digit and a half in diameter; in its hollow end is fixed a wooden
handle two palms and the same number of digits long. The bar rests on
the lower transverse beam, and holds up the stamp when it is not in use.
The axle which raises the stamp has on each side two arms, which are two
palms and three digits distant from each other, and which project from
the axle a foot, a palm and two digits; penetrating through them are
bolts, driven in firmly; the arms are each a palm and two digits wide
and thick, and their round heads, for a foot downward on either side,
are covered with iron plates of the same width as the arms and fastened
by iron nails. The head of each arm has a round hole, into which is
inserted an iron pin, passing through a bronze pipe; this little axle
has at the one end a wide head, and at the other end a perforation
through which is driven an iron nail, lest this little axle should fall
out of the arms. The bronze pipe is two palms long and one in diameter;
the little iron axle penetrates through its round interior, which is two
digits in diameter. The bronze pipe not only revolves round the little
iron axle, but it also rotates with it; therefore, when the axle
revolves, the little axle and the bronze tube in their turn raise the
tooth and the stamp. When the little iron axle and the bronze pipe have
been taken out of the arms, the tooth of the stamps is not raised, and
other stamps may be raised without this one. Further on, a drum with
spindles fixed around the axle of a water-wheel moves the axle of a
toothed drum, which depresses the sweeps of the bellows in the adjacent
fourth part of the building; but it turns in the contrary direction; for
the axis of the drum which raises the stamps turns toward the north,
while that one which depresses the sweeps of the bellows turns toward
the south.

[Illustration 504 (Hearths for heating copper cakes): A--Back wall.
B--Walls at the sides. C--Upright posts. D--Chimney. E--The cakes
arranged. F--Iron plates. G--Rocks. H--Rabble with two prongs.
I--Hammers.]

Those cakes which are too thick to be rapidly broken by blows from the
iron-shod stamp, such as are generally those which have settled in the
bottom of the crucible,[9] are carried into the first part of the
building. They are there heated in a furnace, which is twenty-eight feet
distant from the second long wall and twelve feet from the second
transverse wall. The three sides of this furnace are built of
rectangular rocks, upon which bricks are laid; the back furnace wall is
three feet and a palm high, and the rear of the side walls is the same;
the side walls are sloping, and where the furnace is open in front they
are only two feet and three palms high; all the walls are a foot and a
palm thick. Upon these walls stand upright posts not less thick, in
order that they may bear the heavy weight placed upon them, and they are
covered with lute; these posts support the sloping chimney and penetrate
through the roof. Moreover, not only the ribs of the chimney, but also
the rafters, are covered thickly with lute. The hearth of the furnace is
six feet long on each side, is sloping, and is paved with bricks. The
cakes of copper are placed in the furnace and heated in the following
way. They are first of all placed in the furnace in rows, with as many
small stones the size of an egg between, so that the heat of the fire
can penetrate through the spaces between them; indeed, those cakes which
are placed at the bottom of the crucible are each raised upon half a
brick for the same reason. But lest the last row, which lies against the
mouth of the furnace, should fall out, against the mouth are placed iron
plates, or the copper cakes which are the first taken from the crucible
when copper is made, and against them are laid exhausted liquation cakes
or rocks. Then charcoal is thrown on the cakes, and then live coals; at
first the cakes are heated by a gentle fire, and afterward more charcoal
is added to them until it is at times three-quarters of a foot deep. A
fiercer fire is certainly required to heat the hard cakes of copper than
the fragile ones. When the cakes have been sufficiently heated, which
usually occurs within the space of about two hours, the exhausted
liquation cakes or the rocks and the iron plate are removed from the
mouth of the furnace. Then the hot cakes are taken out row after row
with a two-pronged rabble, such as the one which is used by those who
"dry" the exhausted liquation cakes. Then the first cake is laid upon
the exhausted liquation cakes, and beaten by two workmen with hammers
until it breaks; the hotter the cakes are, the sooner they are broken
up; the less hot, the longer it takes, for now and then they bend into
the shape of copper basins. When the first cake has been broken, the
second is put on to the other fragments and beaten until it breaks into
pieces, and the rest of the cakes are broken up in the same manner in
due order. The head of the hammer is three palms long and one wide, and
sharpened at both ends, and its handle is of wood three feet long. When
they have been broken by the stamp, if cold, or with hammers if hot, the
fragments of copper or the cakes are carried into the store-room for
copper.

The foreman of the works, according to the different proportions of
silver in each _centumpondium_ of copper, alloys it with lead, without
which he could not separate the silver from the copper.[10] If there be
a moderate amount of silver in the copper, he alloys it fourfold; for
instance, if in three-quarters of a _centumpondium_ of copper there is
less than the following proportions, _i.e._: half a _libra_ of silver,
or half a _libra_ and a _sicilicus_, or half a _libra_ and a
_semi-uncia_, or half a _libra_ and _semi-uncia_ and a _sicilicus_, then
rich lead--that is, that from which the silver has not yet been
separated--is added, to the amount of half a _centumpondium_ or a whole
_centumpondium_, or a whole and a half, in such a way that there may be
in the copper-lead alloy some one of the proportions of silver which I
have just mentioned, which is the first alloy. To this "first" alloy is
added such a weight of de-silverized lead or litharge as is required to
make out of all of these a single liquation cake that will contain
approximately two _centumpondia_ of lead; but as usually from one
hundred and thirty _librae_ of litharge only one hundred _librae_ of
lead are made, a greater proportion of litharge than of de-silverized
lead is added as a supplement. Since four cakes of this kind are placed
at the same time into the furnace in which the silver and lead is
liquated from copper, there will be in all the cakes three
_centumpondia_ of copper and eight _centumpondia_ of lead. When the lead
has been liquated from the copper, it weighs six _centumpondia_, in each
_centumpondium_ of which there is a quarter of a _libra_ and almost a
_sicilicus_ of silver. Only seven _unciae_ of the silver remain in the
exhausted liquation cakes and in that copper-lead alloy which we call
"liquation thorns"; they are not called by this name so much because
they have sharp points as because they are base. If in three-quarters of
a _centumpondium_ of copper there are less than seven _uncia_ and a
_semi-uncia_ or a _bes_ of silver, then so much rich lead must be added
as to make in the copper and lead alloy one of the proportions of silver
which I have already mentioned. This is the "second" alloy. To this is
again to be added as great a weight of de-silverized lead, or of
litharge, as will make it possible to obtain from that alloy a liquation
cake containing two and a quarter _centumpondia_ of lead, in which
manner in four of these cakes there will be three _centumpondia_ of
copper and nine _centumpondia_ of lead. The lead which liquates from
these cakes weighs seven _centumpondia_, in each _centumpondium_ of
which there is a quarter of a _libra_ of silver and a little more than a
_sicilicus_. About seven _unciae_ of silver remain in the exhausted
liquation cakes and in the liquation thorns, if we may be allowed to
make common the old name (_spinae_ = thorns) and bestow it upon a new
substance. If in three-quarters of a _centumpondium_ of copper there is
less than three-quarters of a _libra_ of silver, or three-quarters and a
_semi-uncia_, then as much rich lead must be added as will produce one
of the proportions of silver in the copper-lead alloy above mentioned;
this is the "third" alloy. To this is added such an amount of
de-silverized lead or of litharge, that a liquation cake made from it
contains in all two and three-quarters _centumpondia_ of lead. In this
manner four such cakes will contain three _centumpondia_ of copper and
eleven _centumpondia_ of lead. The lead which these cakes liquate, when
they are melted in the furnace, weighs about nine _centumpondia_, in
each _centumpondium_ of which there is a quarter of a _libra_ and more
than a _sicilicus_ of silver; and seven _unciae_ of silver remain in the
exhausted liquation cakes and in the liquation thorns. If, however, in
three-quarters of a _centumpondium_ of copper there is less than
ten-twelfths of a _libra_ or ten-twelfths of a _libra_ and a
_semi-uncia_ of silver, then such a proportion of rich lead is added as
will produce in the copper-lead alloy one of the proportions of silver
which I mentioned above; this is the "fourth" alloy. To this is added
such a weight of de-silverized lead or of litharge, that a liquation
cake made from it contains three _centumpondia_ of lead, and in four
cakes of this kind there are three _centumpondia_ of copper and twelve
_centumpondia_ of lead. The lead which is liquated therefrom weighs
about ten _centumpondia_, in each _centumpondium_ of which there is a
quarter of a _libra_ and more than a _semi-uncia_ of silver, or seven
_unciae_; a _bes_, or seven _unciae_ and a _semi-uncia_, of silver
remain in the exhausted liquation cakes and in the liquation thorns.

[Illustration 508 (Blast Furnaces): A--Furnace in which "slags" are
re-smelted. B--Furnace in which copper is alloyed with lead. C--Door.
D--Forehearths on the ground. E--Copper moulds. F--Rabble. G--Hook.
H--Cleft stick. I--Arm of the crane. K--The hook of its chain.]

Against the second long wall in the second part of the building, whose
area is eighty feet long by thirty-nine feet wide, are four furnaces in
which the copper is alloyed with lead, and six furnaces in which "slags"
are re-smelted. The interior of the first kind of furnace is a foot and
three palms wide, two feet three digits long; and of the second is a
foot and a palm wide and a foot three palms and a digit long. The side
walls of these furnaces are the same height as the furnaces in which
gold or silver ores are smelted. As the whole room is divided into two
parts by upright posts, the front part must have, first, two furnaces in
which "slags" are re-melted; second, two furnaces in which copper is
alloyed with lead; and third, one furnace in which "slags" are
re-melted. The back part of the room has first, one furnace in which
"slags" are re-melted; next, two furnaces in which copper is alloyed
with lead; and third, two furnaces in which "slags" are re-melted. Each
of these is six feet distant from the next; on the right side of the
first is a space of three feet and two palms, and on the left side of
the last one of seven feet. Each pair of furnaces has a common door, six
feet high and a cubit wide, but the first and the tenth furnace each has
one of its own. Each of the furnaces is set in an arch of its own in the
back wall, and in front has a forehearth pit; this is filled with a
powder compound rammed down and compressed in order to make a crucible.
Under each furnace is a hidden receptacle for the moisture,[11] from
which a vent is made through the back wall toward the right, which
allows the vapour to escape. Finally, to the right, in front, is the
copper mould into which the copper-lead alloy is poured from the
forehearth, in order that liquation cakes of equal weight may be made.
This copper mould is a digit thick, its interior is two feet in diameter
and six digits deep. Behind the second long wall are ten pairs of
bellows, two machines for compressing them, and twenty instruments for
inflating them. The way in which these should be made may be understood
from Book IX.

The smelter, when he alloys copper with lead, with his hand throws into
the heated furnace, first the large fragments of copper, then a
basketful of charcoal, then the smaller fragments of copper. When the
copper is melted and begins to run out of the tap-hole into the
forehearth, he throws litharge into the furnace, and, lest part of it
should fly away, he first throws charcoal over it, and lastly lead. As
soon as he has thrown into the furnace the copper and the lead, from
which alloy the first liquation cake is made, he again throws in a
basket of charcoal, and then fragments of copper are thrown over them,
from which the second cake may be made. Afterward with a rabble he skims
the "slag" from the copper and lead as they flow into the forehearth.
Such a rabble is a board into which an iron bar is fixed; the board is
made of elder-wood or willow, and is ten digits long, six wide, and one
and a half digits thick; the iron bar is three feet long, and the wooden
handle inserted into it is two and a half feet long. While he purges the
alloy and pours it out with a ladle into the copper mould, the fragments
of copper from which he is to make the second cake are melting. As soon
as this begins to run down he again throws in litharge, and when he has
put on more charcoal he adds the lead. This operation he repeats until
thirty liquation cakes have been made, on which work he expends nine
hours, or at most ten; if more than thirty cakes must be made, then he
is paid for another shift when he has made an extra thirty.

At the same time that he pours the copper-lead alloy into the copper
mould, he also pours water slowly into the top of the mould. Then, with
a cleft stick, he takes a hook and puts its straight stem into the
molten cake. The hook itself is a digit and a half thick; its straight
stem is two palms long and two digits wide and thick. Afterward he pours
more water over the cakes. When they are cold he places an iron ring in
the hook of the chain let down from the pulley of the crane arm; the
inside diameter of this ring is six digits, and it is about a digit and
a half thick; the ring is then engaged in the hook whose straight stem
is in the cake, and thus the cake is raised from the mould and put into
its place.

The copper and lead, when thus melted, yield a small amount of
"slag"[12] and much litharge. The litharge does not cohere, but falls to
pieces like the residues from malt from which beer is made. _Pompholyx_
adheres to the walls in white ashes, and to the sides of the furnace
adheres _spodos_.

In this practical manner lead is alloyed with copper in which there is
but a moderate portion of silver. If, however, there is much silver in
it, as, for instance, two _librae_, or two _librae_ and a _bes_, to the
_centumpondium_,--which weighs one hundred and thirty-three and a third
_librae_, or one hundred and forty-six _librae_ and a _bes_,[13]--then
the foreman of the works adds to a _centumpondium_ of such copper three
_centumpondia_ of lead, in each _centumpondium_ of which there is a
third of a _libra_ of silver, or a third of a _libra_ and a
_semi-uncia_. In this manner three liquation cakes are made, which
contain altogether three _centumpondia_ of copper and nine
_centumpondia_ of lead.[14] The lead, when it has been liquated from the
copper, weighs seven _centumpondia_; and in each _centumpondium_--if the
_centumpondium_ of copper contain two _librae_ of silver, and the lead
contain a third of a _libra_--there will be a _libra_ and a sixth and
more than a _semi-uncia_ of silver; while in the exhausted liquation
cakes, and in the liquation thorns, there remains a third of a _libra_.
If a _centumpondium_ of copper contains two _librae_ and a _bes_ of
silver, and the lead a third of a _libra_ and a _semi-uncia_, there will
be in each liquation cake one and a half _librae_ and a _semi-uncia_,
and a little more than a _sicilicus_ of silver. In the exhausted
liquation cakes there remain a third of a _libra_ and a _semi-uncia_ of
silver.

[Illustration 510 (Furnaces enriching copper bottoms): A--Furnace.
B--Forehearth. C--Dipping-Pot. D--Cakes.]

If there be in the copper only a minute proportion of silver, it cannot
be separated easily until it has been re-melted in other furnaces, so
that in the "bottoms" there remains more silver and in the "tops"
less.[15] This furnace, vaulted with unbaked bricks, is similar to an
oven, and also to the cupellation furnace, in which the lead is
separated from silver, which I described in the last book. The crucible
is made of ashes, in the same manner as in the latter, and in the front
of the furnace, three feet above the floor of the building, is the mouth
out of which the re-melted copper flows into a forehearth and a
dipping-pot. On the left side of the mouth is an aperture, through which
beech-wood may be put into the furnace to feed the fire. If in a
_centumpondium_ of copper there were a sixth of a _libra_ and a
_semi-uncia_ of silver, or a quarter of a _libra_, or a quarter of a
_libra_ and a _semi-uncia_--there is re-melted at the same time
thirty-eight _centumpondia_ of it in this furnace, until there remain in
each _centumpondium_ of the copper "bottoms" a third of a _libra_ and a
_semi-uncia_ of silver. For example, if in each _centumpondium_ of
copper not yet re-melted, there is a quarter of a _libra_ and a
_semi-uncia_ of silver, then the thirty-eight _centumpondia_ that are
smelted together must contain a total of eleven _librae_ and an _uncia_
of silver. Since from fifteen _centumpondia_ of re-melted copper there
was a total of four and a third _librae_ and a _semi-uncia_ of silver,
there remain only two and a third _librae_. Thus there is left in the
"bottoms," weighing twenty-three _centumpondia_, a total of eight and
three-quarter _librae_ of silver. Therefore, each _centumpondium_ of
this contains a third of a _libra_ and a _semi-uncia_, a _drachma_, and
the twenty-third part of a _drachma_ of silver; from such copper it is
profitable to separate the silver. In order that the master may be more
certain of the number of _centumpondia_ of copper in the "bottoms," he
weighs the "tops" that have been drawn off from it; the "tops" were
first drawn off into the dipping-pot, and cakes were made from them.
Fourteen hours are expended on the work of thus dividing the copper. The
"bottoms," when a certain weight of lead has been added to them, of
which alloy I shall soon speak, are melted in the blast furnace;
liquation cakes are then made, and the silver is afterward separated
from the copper. The "tops" are subsequently melted in the blast
furnace, and re-melted in the refining furnace, in order that red copper
shall be made[16]; and the "tops" from this are again smelted in the
blast furnace, and then again in the refining furnace, that therefrom
shall be made _caldarium_ copper. But when the copper, yellow or red or
_caldarium_ is re-smelted in the refining furnace, forty _centumpondia_
are placed in it, and from it they make at least twenty, and at most
thirty-five, _centumpondia_. About twenty-two _centumpondia_ of
exhausted liquation cakes and ten of yellow copper and eight of red, are
simultaneously placed in this latter furnace and smelted, in order that
they may be made into refined copper.

The copper "bottoms" are alloyed in three different ways with lead.[17]
First, five-eighths of a _centumpondium_ of copper and two and
three-quarters _centumpondia_ of lead are taken; and since one liquation
cake is made from this, therefore two and a half _centumpondia_ of
copper and eleven _centumpondia_ of lead make four liquation cakes.
Inasmuch as in each _centumpondium_ of copper there is a third of a
_libra_ of silver, there would be in the whole of the copper
ten-twelfths of a _libra_ of silver; to these are added four
_centumpondia_ of lead re-melted from "slags," each _centumpondium_ of
which contains a _sicilicus_ and a _drachma_ of silver, which weights
make up a total of an _uncia_ and a half of silver. There is also added
seven _centumpondia_ of de-silverized lead, in each _centumpondium_ of
which there is a _drachma_ of silver; therefore in the four cakes of
copper-lead alloy there is a total of a _libra_, a _sicilicus_ and a
_drachma_ of silver. In each single _centumpondium_ of lead, after it
has been liquated from the copper, there is an _uncia_ and a _drachma_
of silver, which alloy we call "poor" argentiferous lead, because it
contains but little silver. But as five cakes of that kind are placed
together in the furnace, they liquate from them usually as much as nine
and three-quarters _centumpondia_ of poor argentiferous lead, in each
_centumpondium_ of which there is an _uncia_ and a _drachma_ of silver,
or a total of ten _unciae_ less four _drachmae_. Of the liquation thorns
there remain three _centumpondia_, in each _centumpondium_ of which
there are three _sicilici_ of silver; and there remain four
_centumpondia_ of exhausted liquation cakes, each _centumpondium_ of
which contains a _semi-uncia_ or four and a half _drachmae_. Inasmuch as
in a _centumpondium_ of copper "bottoms" there is a third of a _libra_
and a _semi-uncia_ of silver, in five of those cakes there must be more
than one and a half _unciae_ and half a _drachma_ of silver.

Then, again, from another two and a half _centumpondia_ of copper
"bottoms," together with eleven _centumpondia_ of lead, four liquation
cakes are made. If in each _centumpondium_ of copper there was a third
of a _libra_ of silver, there would be in the whole of the
_centumpondia_ of base metal five-sixths of a _libra_ of the precious
metal. To this copper is added eight _centumpondia_ of poor
argentiferous lead, each _centumpondium_ of which contains an _uncia_
and a _drachma_ of silver, or a total of three-quarters of a _libra_ of
silver. There is also added three _centumpondia_ of de-silverized lead,
in each _centumpondium_ of which there is a _drachma_ of silver.
Therefore, four liquation cakes contain a total of a _libra_, seven
_unciae_, a _sicilicus_ and a _drachma_ of silver; thus each
_centumpondium_ of lead, when it has been liquated from the copper,
contains an _uncia_ and a half and a _sicilicus_ of silver, which alloy
we call "medium" silver-lead.

Then, again, from another two and a half _centumpondia_ of copper
"bottoms," together with eleven _centumpondia_ of lead, they make four
liquation cakes. If in each _centumpondium_ of copper there were
likewise a third of a _libra_ of silver, there will be in all the weight
of the base metal five-sixths of a _libra_ of the precious metal. To
this is added nine _centumpondia_ of medium silver-lead, each
_centumpondium_ of which contains an _uncia_ and a half and a
_sicilicus_ of silver; or a total of a _libra_ and a quarter and a
_semi-uncia_ and a _sicilicus_ of silver. And likewise they add two
_centumpondia_ of poor silver-lead, in each of which there is an _uncia_
and a _drachma_ of silver. Therefore the four liquation cakes contain
two and a third _librae_ of silver. Each _centumpondium_ of lead, when
it has been liquated from the copper, contains a sixth of a _libra_ and
a _semi-uncia_ and a _drachma_ of silver. This alloy we call "rich"
silver-lead; it is carried to the cupellation furnace, in which lead is
separated from silver. I have now mentioned in how many ways copper
containing various proportions of silver is alloyed with lead, and how
they are melted together in the furnace and run into the casting pan.

[Illustration 514 (Crane for liquation cakes): A--Crane. B--Drum
consisting of rundles. C--Toothed drum. D--Trolley and its wheels.
E--Triangular board. F--Cakes. G--Chain of the crane. H--Its hook.
I--Ring. K--The tongs.]

Now I will speak of the method by which lead is liquated from copper
simultaneously with the silver. The liquation cakes are raised from the
ground with the crane, and placed on the copper plates of the furnaces.
The hook of the chain let down from the arm of the crane, is inserted in
a ring of the tongs, one jaw of which has a tooth; a ring is engaged in
each of the handles of the tongs, and these two rings are engaged in a
third, in which the hook of the chain is inserted. The tooth on the one
jaw of the tongs is struck by a hammer, and driven into the hole in the
cake, at the point where the straight end of the hook was driven into
it when it was lifted out of the copper mould; the other jaw of the
tongs, which has no tooth, squeezes the cake, lest the tooth should fall
out of it; the tongs are one and a half feet long, each ring is a digit
and a half thick, and the inside is a palm and two digits in diameter.
Those cranes by which the cakes are lifted out of the copper pans and
placed on the ground, and lifted up again from there and placed in the
furnaces, are two in number--one in the middle space between the third
transverse wall and the two upright posts, and the other in the middle
space between the same posts and the seventh transverse wall. The
rectangular crane-post of both of these is two feet wide and thick, and
is eighteen feet from the third long wall, and nineteen from the second
long wall. There are two drums in the framework of each--one drum
consisting of rundles, the other being toothed. The crane-arm of each
extends seventeen feet, three palms and as many digits from the post.
The trolley of each crane is two feet and as many palms long, a foot and
two digits wide, and a palm and two digits thick; but where it runs
between the beams of the crane-arm it is three digits wide and a palm
thick; it has five notches, in which turn five brass wheels, four of
which are small, and the fifth much larger than the rest. The notches in
which the small wheels turn are two palms long and as much as a palm
wide; those wheels are a palm wide and a palm and two digits in
diameter; four of the notches are near the four corners of the trolley;
the fifth notch is between the two front ones, and it is two palms back
from the front. Its pulley is larger than the rest, and turns in its own
notch; it is three palms in diameter and one palm wide, and grooved on
the circumference, so that the iron chain may run in the groove. The
trolley has two small axles, to the one in front are fastened three, and
to the one at the back, the two wheels; two wheels run on the one beam
of the crane-arm, and two on the other; the fifth wheel, which is larger
than the others, runs between those two beams. Those people who have no
cranes place the cakes on a triangular board, to which iron cleats are
affixed, so that it will last longer; the board has three iron chains,
which are fixed in an iron ring at the top; two workmen pass a pole
through the ring and carry it on their shoulders, and thus take the cake
to the furnace in which silver is separated from copper.

From the vicinity of the furnaces in which copper is mixed with lead and
the "slags" are re-melted, to the third long wall, are likewise ten
furnaces, in which silver mixed with lead is separated from copper. If
this space is eighty feet and two palms long, and the third long wall
has in the centre a door three feet and two palms wide, then the spaces
remaining at either side of the door will be thirty-eight feet and two
palms; and if each of the furnaces occupies four feet and a palm, then
the interval between each furnace and the next one must be a foot and
three palms; thus the width of the five furnaces and four interspaces
will be twenty-eight feet and a palm. Therefore, there remain ten feet
and a palm, which measurement is so divided that there are five feet and
two digits between the first furnace and the transverse wall, and as
many feet and digits between the fifth furnace and the door; similarly
in the other part of the space from the door to the sixth furnace, there
must be five feet and two digits, and from the tenth furnace to the
seventh transverse wall, likewise, five feet and two digits. The door is
six feet and two palms high; through it the foreman of the _officina_
and the workmen enter the store-room in which the silver-lead alloy is
kept.

[Illustration 517 (Liquation Furnace): A--Sole-stones. B--Rectangular
stones. C--Copper plates. D--Front panel. E--Side panels. F--Bar.
G--Front end of the long iron rods. H--Short chain. I--Hooked rod.
K--Wall which protects the third long wall from injury by fire. L--Third
long wall. M--Feet of the panels. N--Iron blocks. O--Cakes. P--Hearth.
Q--Receiving-pit.]

Each furnace has a bed, a hearth, a rear wall, two sides and a front,
and a receiving-pit. The bed consists of two sole-stones, four
rectangular stones, and two copper plates; the sole-stones are five feet
and a palm long, a cubit wide, a foot and a palm thick, and they are
sunk into the ground, so that they emerge a palm and two digits; they
are distant from each other about three palms, yet the distance is
narrower at the back than the front. Each of the rectangular stones is
two feet and as many palms long, a cubit wide, and a cubit thick at the
outer edge, and a foot and a palm thick on the inner edge which faces
the hearth, thus they form an incline, so that there is a slope to the
copper plates which are laid upon them. Two of these rectangular stones
are placed on one sole-stone; a hole is cut in the upper edge of each,
and into the holes are placed iron clamps, and lead is poured in; they
are so placed on the sole-stones that they project a palm at the sides,
and at the front the sole-stones project to the same extent; if
rectangular stones are not available, bricks are laid in their place.
The copper plates are four feet two palms and as many digits long, a
cubit wide, and a palm thick; each edge has a protuberance, one at the
front end, the other at the back; these are a palm and three digits
long, and a palm wide and thick. The plates are so laid upon the
rectangular stones that their rear ends are three digits from the third
long wall; the stones project beyond the plate the same number of digits
in front, and a palm and three digits at the sides. When the plates have
been joined, the groove which is between the protuberances is a palm and
three digits wide, and four feet long, and through it flows the
silver-lead which liquates from the cakes. When the plates are corroded
either by the fire or by the silver-lead, which often adheres to them in
the form of stalactites, and is chipped off, they are exchanged, the
right one being placed to the left, and the left one, on the contrary,
to the right; but the left side of the plates, which, when the fusion of
the copper took place, came into contact with the copper, must lie flat;
so that when the exchange of the plates has been carried out, the
protuberances, which are thus on the underside, raise the plate from the
stones, and they have to be partially chipped off, lest they should
prove an impediment to the work; and in each of their places is laid a
piece of iron, three palms long, a digit thick at both ends, and a palm
thick in the centre for the length of a palm and three digits.

The passage under the plates between the rectangular stones is a foot
wide at the back, and a foot and a palm wide at the front, for it
gradually widens out. The hearth, which is between the sole-stones, is
covered with a bed of hearth-lead, taken from the crucible in which lead
is separated from silver. The rear end is the highest, and should be so
high that it reaches to within six digits of the plates, from which
point it slopes down evenly to the front end, so that the argentiferous
lead alloy which liquates from the cakes can flow into the
receiving-pit. The wall built against the third long wall in order to
protect it from injury by fire, is constructed of bricks joined together
with lute, and stands on the copper plates; this wall is two feet, a
palm and two digits high, two palms thick, and three feet, a palm and
three digits wide at the bottom, for it reaches across both of them; at
the top it is three feet wide, for it rises up obliquely on each side.
At each side of this wall, at a height of a palm and two digits above
the top of it, there is inserted in a hole in the third long wall a
hooked iron rod, fastened in with molten lead; the rod projects two
palms from the wall, and is two digits wide and one digit thick; it has
two hooks, the one at the side, the other at the end. Both of these
hooks open toward the wall, and both are a digit thick, and both are
inserted in the last, or the adjacent, links of a short iron chain. This
chain consists of four links, each of which is a palm and a digit long
and half a digit thick; the first link is engaged in the first hole in a
long iron rod, and one or other of the remaining three links engages the
hook of the hooked rod. The two long rods are three feet and as many
palms and digits long, two digits wide, and one digit thick; both ends
of both of these rods have holes, the back one of which is round and a
digit in diameter, and in this is engaged the first link of the chain as
I have stated; the hole at the front end is two digits and a half long
and a digit and a half wide. This end of each rod is made three digits
wide, while for the rest of its length it is only two digits, and at the
back it is two and a half digits. Into the front hole of each rod is
driven an iron bar, which is three feet and two palms long, two digits
wide and one thick; in the end of this bar are five small square holes,
two-thirds of a digit square; each hole is distant from the other half a
digit, the first being at a distance of about a digit from the end. Into
one of these holes the refiner drives an iron pin; if he should desire
to make the furnace narrower, then he drives it into the last hole; if
he should desire to widen it, then into the first hole; if he should
desire to contract it moderately, then into one of the middle holes. For
the same reason, therefore, the hook is sometimes inserted into the last
link of the chain, and sometimes into the third or the second. The
furnace is widened when many cakes are put into it, and contracted when
there are but few, but to put in more than five is neither usual nor
possible; indeed, it is because of thin cakes that the walls are
contracted. The bar has a hump, which projects a digit on each side at
the back, of the same width and thickness as itself. These humps
project, lest the bar should slip through the hole of the right-hand
rod, in which it remains fixed when it, together with the rods, is not
pressing upon the furnace walls.

[Illustration 519 (Liquation Furnaces): A--Furnace in which the
operation of liquation is being performed. B--Furnace in which it is not
being performed. C--Receiving-pit. D--Moulds. E--Cakes. F--Liquation
thorns.]

There are three panels to the furnace--two at the sides, one in front
and another at the back. Those which are at the sides are three feet and
as many palms and two digits long, and two feet high; the front one is
two feet and a palm and three digits long, and, like the side ones, two
feet high. Each consists of iron bars, of feet, and of iron plates.
Those which are at the side have seven bars, the lower and upper of
which are of the same length as the panels; the former holds up the
upright bars; the latter is placed upon them; the uprights are five in
number, and have the same height as the panels; the middle ones are
inserted into holes in the upper and lower bars; the outer ones are made
of one and the same bar as the lower and upper ones. They are two digits
wide and one thick. The front panel has five bars; the lower one holds
similar uprights, but there are three of them only; the upper bar is
placed on them. Each of these panels has two feet fixed at each end of
the lower bar, and these are two palms long, one wide, and a digit
thick. The iron plates are fastened to the inner side of the bars with
iron wire, and they are covered with lute, so that they may last longer
and may be uninjured by the fire. There are, besides, iron blocks three
palms long, one wide, and a digit and a half thick; the upper surface of
these is somewhat hollowed out, so that the cakes may stand in them;
these iron blocks are dipped into a vessel in which there is clay mixed
with water, and they are used only for placing under the cakes of copper
and lead alloy made in the furnaces. There is more silver in these than
in those which are made of liquation thorns, or furnace accretions, or
re-melted "slags." Two iron blocks are placed under each cake, in order
that, by raising it up, the fire may bring more force to bear upon it;
the one is put on the right bed-plate, the other on the left. Finally,
outside the hearth is the receiving-pit, which is a foot wide and three
palms deep; when this is worn away it is restored with lute alone, which
easily retains the lead alloy.

If four liquation cakes are placed on the plates of each furnace, then
the iron blocks are laid under them; but if the cakes are made from
copper "bottoms," or from liquation thorns, or from the accretions or
"slags," of which I have partly written above and will further describe
a little later, there are five of them, and because they are not so
large and heavy, no blocks are placed under them. Pieces of charcoal six
digits long are laid between the cakes, lest they should fall one
against the other, or lest the last one should fall against the wall
which protects the third long wall from injury by fire. In the middle
empty spaces, long and large pieces of charcoal are likewise laid. Then
when the panels have been set up, and the bar has been closed, the
furnace is filled with small charcoal, and a wicker basket full of
charcoal is thrown into the receiving-pit, and over that are thrown live
coals; soon afterward the burning coal, lifted up in a shovel, is spread
over all parts of the furnace, so that the charcoal in it may be
kindled; any charcoal which remains in the receiving-pit is thrown into
the passage, so that it may likewise be heated. If this has not been
done, the silver-lead alloy liquated from the cakes is frozen by the
coldness of the passage, and does not run down into the receiving-pit.

After a quarter of an hour the cakes begin to drip silver-lead
alloy,[18] which runs down through the openings between the copper
plates into the passage. When the long pieces of charcoal have burned
up, if the cakes lean toward the wall, they are placed upright again
with a hooked bar, but if they lean toward the front bar they are
propped up by charcoal; moreover, if some cakes shrink more than the
rest, charcoal is added to the former and not to the others. The silver
drips together with the lead, for both melt more rapidly than copper.
The liquation thorns do not flow away, but remain in the passage, and
should be turned over frequently with a hooked bar, in order that the
silver-lead may liquate away from them and flow down into the receiving
pit; that which remains is again melted in the blast furnace, while that
which flows into the receiving pit is at once carried with the remaining
products to the cupellation furnace, where the lead is separated from
the silver. The hooked bar has an iron handle two feet long, in which is
set a wooden one four feet long. The silver-lead which runs out into the
receiving-pit is poured out by the refiner with a bronze ladle into
eight copper moulds, which are two palms and three digits in diameter;
these are first smeared with a lute wash so that the cakes of
silver-lead may more easily fall out when they are turned over. If the
supply of moulds fails because the silver-lead flows down too rapidly
into the receiving-pit, then water is poured on them, in order that the
cakes may cool and be taken out of them more rapidly; thus the same
moulds may be used again immediately; if no such necessity urges the
refiner, he washes over the empty moulds with a lute wash. The ladle is
exactly similar to that which is used in pouring out the metals that are
melted in the blast furnace. When all the silver-lead has run down from
the passage into the receiving-pit, and has been poured out into copper
moulds, the thorns are drawn out of the passage into the receiving-pit
with a rabble; afterward they are raked on to the ground from the
receiving-pit, thrown with a shovel into a wheelbarrow, and, having been
conveyed away to a heap, are melted once again. The blade of the rabble
is two palms and as many digits long, two palms and a digit wide, and
joined to its back is an iron handle three feet long; into the iron
handle is inserted a wooden one as many feet in length.

The residue cakes, after the silver-lead has been liquated from the
copper, are called "exhausted liquation cakes" (_fathiscentes_), because
when thus smelted they appear to be dried up. By placing a crowbar under
the cakes they are raised up, seized with tongs, and placed in the
wheelbarrow; they are then conveyed away to the furnace in which they
are "dried." The crowbar is somewhat similar to those generally used to
chip off the accretions that adhere to the walls of the blast furnace.
The tongs are two and a half feet long. With the same crowbar the
stalactites are chipped off from the copper plates from which they hang,
and with the same instrument the iron blocks are struck off the
exhausted liquation cakes to which they adhere. The refiner has
performed his day's task when he has liquated the silver-lead from
sixteen of the large cakes and twenty of the smaller ones; if he
liquates more than this, he is paid separately for it at the price for
extraordinary work.

Silver, or lead mixed with silver, which we call _stannum_, is separated
by the above method from copper. This silver-lead is carried to the
cupellation furnace, in which lead is separated from silver; of these
methods I will mention only one, because in the previous book I have
explained them in detail. Amongst us some years ago only forty-four
_centumpondia_ of silver-lead and one of copper were melted together in
the cupellation furnaces, but now they melt forty-six _centumpondia_ of
silver-lead and one and a half _centumpondia_ of copper; in other
places, usually a hundred and twenty _centumpondia_ of silver-lead alloy
and six of copper are melted, in which manner they make about one
hundred and ten _centumpondia_ more or less of litharge and thirty of
hearth-lead. But in all these methods the silver which is in the copper
is mixed with the remainder of silver; the copper itself, equally with
the lead, will be changed partly into litharge and partly into
hearth-lead.[19] The silver-lead alloy which does not melt is taken from
the margin of the crucible with a hooked bar.

[Illustration 522 (Exhausted Liquation Cakes): A--Cakes. B--Hammer.]

The work of "drying" is distributed into four operations, which are
performed in four days. On the first--as likewise on the other three
days--the master begins at the fourth hour of the morning, and with his
assistant chips off the stalactites from the exhausted liquation cakes.
They then carry the cakes to the furnace, and put the stalactites upon
the heap of liquation thorns. The head of the chipping hammer is three
palms and as many digits long; its sharp edge is a palm wide; the round
end is three digits thick; the wooden handle is four feet long.

The master throws pulverised earth into a small vessel, sprinkles water
over it, and mixes it; this he pours over the whole hearth, and
sprinkles charcoal dust over it to the thickness of a digit. If he
should neglect this, the copper, settling in the passages, would adhere
to the copper bed-plates, from which it can be chipped off only with
difficulty; or else it would adhere to the bricks, if the hearth was
covered with them, and when the copper is chipped off these they are
easily broken. On the second day, at the same time, the master arranges
bricks in ten rows; in this manner twelve passages are made. The first
two rows of bricks are between the first and the second openings on the
right of the furnace; the next three rows are between the second and
third openings, the following three rows are between the third and the
fourth openings, and the last two rows between the fourth and fifth
openings. These bricks are a foot and a palm long, two palms and a digit
wide, and a palm and two digits thick; there are seven of these thick
bricks in a row, so there are seventy all together. Then on the first
three rows of bricks they lay exhausted liquation cakes and a layer five
digits thick of large charcoal; then in a similar way more exhausted
liquation cakes are laid upon the other bricks, and charcoal is thrown
upon them; in this manner seventy _centumpondia_ of cakes are put on the
hearth of the furnace. But if half of this weight, or a little more, is
to be "dried," then four rows of bricks will suffice. Those who dry
exhausted liquation cakes[20] made from copper "bottoms" place ninety or
a hundred _centumpondia_[21] into the furnace at the same time. A place
is left in the front part of the furnace for the topmost cakes removed
from the forehearth in which copper is made, these being more suitable
for supporting the exhausted liquation cakes than are iron plates;
indeed, if the former cakes drip copper from the heat, this can be taken
back with the liquation thorns to the first furnace, but melted iron is
of no use to us in these matters. When the cakes of this kind have been
placed in front of the exhausted liquation cakes, the workman inserts
the iron bar into the holes on the inside of the wall, which are at a
height of three palms and two digits above the hearth; the hole to the
left penetrates through into the wall, so that the bar may be pushed
back and forth. This bar is round, eight feet long and two digits in
diameter; on the right side it has a haft made of iron, which is about a
foot from the right end; the aperture in this haft is a palm wide, two
digits high, and a digit thick. The bar holds the exhausted liquation
cakes opposite, lest they should fall down. When the operation of
"drying" is completed, a workman draws out this bar with a crook which
he inserts into the haft, as I will explain hereafter.

[Illustration 525 (Drying Furnace for Liquation): A--Side walls.
B--Front arch. C--Rear arch. D--Wall in the rear arch. E--Inner wall.
F--Vent holes. G--Chimney. H--Hearth. I--Tank. K--Pipe. L--Plug. M--Iron
door. N--Transverse bars. O--Upright bars. P--Plates. Q--Rings of the
bars. R--Chains. S--Rows of bricks. T--Bar. V--Its haft. X--Copper
bed-plates.]

In order that one should understand those things of which I have spoken,
and concerning which I am about to speak, it is necessary for me to give
some information beforehand about the furnace and how it is to be made.
It stands nine feet from the fourth long wall, and as far from the wall
which is between the second and fourth transverse walls. It consists of
walls, an arch, a chimney, an interior wall, and a hearth; the two walls
are at the sides; and they are eleven feet three palms and two digits
long, and where they support the chimney they are eight feet and a palm
high. At the front of the arch they are only seven feet high; they are
two feet three palms and two digits thick, and are made either of rock
or of bricks; the distance between them is eight feet, a palm and two
digits. There are two of the arches, for the space at the rear between
the walls is also arched from the ground, in order that it may be able
to support the chimney; the foundations of these arches are the walls of
the furnace; the span of the arch has the same length as the space
between the walls; the top of the arch is five feet, a palm and two
digits high. In the rear arch there is a wall made of bricks joined with
lime; this wall at a height of a foot and three palms from the ground
has five vent-holes, which are two palms and a digit high, a palm and a
digit wide, of which the first is near the right interior wall, and the
last near the left interior wall, the remaining three in the intervening
space; these vent-holes penetrate through the interior of the wall which
is in the arch. Half-bricks can be placed over the vent-holes, lest too
much air should be drawn into the furnace, and they can be taken out at
times, in order that he who is "drying" the exhausted liquation cakes
may inspect the passages, as they are called, to see whether the cakes
are being properly "dried." The front arch is three feet two palms
distant from the rear one; this arch is the same thickness as that of
the rear arch, but the span is six feet wide; the interior of the arch
itself is of the same height as the walls. A chimney is built upon the
arches and the walls, and is made of bricks joined together with lime;
it is thirty-six feet high and penetrates through the roof. The interior
wall is built against the rear arch and both the side walls, from which
it juts out a foot; it is three feet and the same number of palms high,
three palms thick, and is made of bricks joined together with lute and
smeared thickly with lute, sloping up to the height of a foot above it.
This wall is a kind of shield, for it protects the exterior walls from
the heat of the fire, which is apt to injure them; the latter cannot be
easily re-made, while the former can be repaired with little work.

The hearth is made of lute, and is covered either with copper plates,
such as those of the furnaces in which silver is liquated from copper,
although they have no protuberances, or it may be covered with bricks,
if the owners are unwilling to incur the expense of copper plates. The
wider part of the hearth is made sloping in such a manner that the rear
end reaches as high as the five vent-holes, and the front end of the
hearth is so low that the back of the front arch is four feet, three
palms and as many digits above it, and the front five feet, three palms
and as many digits. The hearth beyond the furnaces is paved with bricks
for a distance of six feet. Near the furnace, against the fourth long
wall, is a tank thirteen feet and a palm long, four feet wide, and a
foot and three palms deep. It is lined on all sides with planks, lest
the earth should fall into it; on one side the water flows in through
pipes, and on the other, if the plug be pulled out, it soaks into the
earth; into this tank of water are thrown the cakes of copper from which
the silver and lead have been separated. The fore part of the front
furnace arch should be partly closed with an iron door; the bottom of
this door is six feet and two digits wide; the upper part is somewhat
rounded, and at the highest point, which is in the middle, it is three
feet and two palms high. It is made of iron bars, with plates fastened
to them with iron wire, there being seven bars--three transverse and
four upright--each of which is two digits wide and half a digit thick.
The lowest transverse bar is six feet and two palms long; the middle one
has the same length; the upper one is curved and higher at the centre,
and thus longer than the other two. The upright bars are two feet
distant from one another; both the outer ones are two feet and as many
palms high; but the centre ones are three feet and two palms. They
project from the upper curved transverse bar and have holes, in which
are inserted the hooks of small chains two feet long; the topmost links
of these chains are engaged in the ring of a third chain, which, when
extended, reaches to one end of a beam which is somewhat cut out. The
chain then turns around the beam, and again hanging down, the hook in
the other end is fastened in one of the links. This beam is eleven feet
long, a palm and two digits wide, a palm thick, and turns on an iron
axle fixed in a nearby timber; the rear end of the beam has an iron pin,
which is three palms and a digit long, and which penetrates through it
where it lies under a timber, and projects from it a palm and two digits
on one side, and three digits on the other side. At this point the pin
is perforated, in order that a ring may be fixed in it and hold it,
lest it should fall out of the beam; that end is hardly a digit thick,
while the other round end is thicker than a digit. When the door is to
be shut, this pin lies under the timber and holds the door so that it
cannot fall; the pin likewise prevents the rectangular iron band which
encircles the end of the beam, and into which is inserted the ring of a
long hook, from falling from the end. The lowest link of an iron chain,
which is six feet long, is inserted in the ring of a staple driven into
the right wall of the furnace, and fixed firmly by filling in with
molten lead. The hook suspended at the top from the ring should be
inserted in one of these lower links, when the door is to be raised;
when the door is to be let down, the hook is taken out of that link and
put into one of the upper links.

[Illustration 527 (Drying Furnace for Liquation): A--The door let down.
B--Bar. C--Exhausted liquation cakes. D--Bricks. E--Tongs.]

On the third day the master sets about the principal operation. First he
throws a basketful of charcoals on to the ground in front of the hearth,
and kindles them by adding live coals, and having thrown live coals on
to the cakes placed within, he spreads them equally all over with an
iron shovel. The blade of the shovel is three palms and a digit long,
and three palms wide; its iron handle is two palms long, and the wooden
one ten feet long, so that it can reach to the rear wall of the furnace.
The exhausted liquation cakes become incandescent in an hour and a half,
if the copper was good and hard, or after two hours, if it was soft and
fragile. The workman adds charcoal to them where he sees it is needed,
throwing it into the furnace through the openings on both sides between
the side walls and the closed door. This opening is a foot and a palm
wide. He lets down the door, and when the "slags" begin to flow he opens
the passages with a bar; this should take place after five hours; the
door is let down over the upper open part of the arch for two feet and
as many digits, so that the master can bear the violence of the heat.
When the cakes shrink, charcoal should not be added to them lest they
should melt. If the cakes made from poor and fragile copper are "dried"
with cakes made from good hard copper, very often the copper so settles
into the passages that a bar thrust into them cannot penetrate them.
This bar is of iron, six feet and two palms long, into which a wooden
handle five feet long is inserted. The refiner draws off the "slags"
with a rabble from the right side of the hearth. The blade of the rabble
is made of an iron plate a foot and a palm wide, gradually narrowing
toward the handle; the blade is two palms high, its iron handle is two
feet long, and the wooden handle set into it is ten feet long.

[Illustration 528 (Drying Furnace for Liquation): A--The door raised.
B--Hooked bar. C--Two-pronged rake. D--Tongs. E--Tank.]

When the exhausted liquation cakes have been "dried," the master raises
the door in the manner I have described, and with a long iron hook
inserted into the haft of the bar he draws it through the hole in the
left wall from the hole in the right wall; afterward he pushes it back
and replaces it. The master then takes out the exhausted liquation cakes
nearest to him with the iron hook; then he pulls out the cakes from the
bricks. This hook is two palms high, as many digits wide, and one thick;
its iron handle is two feet long, and the wooden handle eleven feet
long. There is also a two-pronged rake with which the "dried" cakes are
drawn over to the left side so that they may be seized with tongs; the
prongs of the rake are pointed, and are two palms long, as many digits
wide, and one digit thick; the iron part of the handle is a foot long,
the wooden part nine feet long. The "dried" cakes, taken out of the
hearth by the master and his assistants, are seized with other tongs and
thrown into the rectangular tank, which is almost filled with water.
These tongs are two feet and three palms long, both the handles are
round and more than a digit thick, and the ends are bent for a palm and
two digits; both the jaws are a digit and a half wide in front and
sharpened; at the back they are a digit thick, and then gradually taper,
and when closed, the interior is two palms and as many digits wide.

The "dried" cakes which are dripping copper are not immediately dipped
into the tank, because, if so, they burst in fragments and give out a
sound like thunder. The cakes are afterward taken out of the tank with
the tongs, and laid upon the two transverse planks on which the workmen
stand; the sooner they are taken out the easier it is to chip off the
copper that has become ash-coloured. Finally, the master, with a spade,
raises up the bricks a little from the hearth, while they are still
warm. The blade of the spade is a palm and two digits long, the lower
edge is sharp, and is a palm and a digit wide, the upper end a palm
wide; its handle is round, the iron part being two feet long, and the
wooden part seven and a half feet long.

On the fourth day the master draws out the liquation thorns which have
settled in the passages; they are much richer in silver than those that
are made when the silver-lead is liquated from copper in the liquation
furnace. The "dried" cakes drip but little copper, but nearly all their
remaining silver-lead and the thorns consist of it, for, indeed, in one
_centumpondium_ of "dried" copper there should remain only half an
_uncia_ of silver, and there sometimes remain only three _drachmae_.[22]
Some smelters chip off the metal adhering to the bricks with a hammer,
in order that it may be melted again; others, however, crush the bricks
under the stamps and wash them, and the copper and lead thus collected
is melted again. The master, when he has taken these things away and put
them in their places, has finished his day's work.

[Illustration 530 (Dried Liquation Cakes): A--Tank. B--Board. C--Tongs.
D--"Dried" cakes taken out of the tanks. E--Block. F--Rounded hammer.
G--Pointed hammer.]

The assistants take the "dried" cakes out of the tank on the next day,
place them on an oak block, and first pound them with rounded hammers in
order that the ash-coloured copper may fall away from them, and then
they dig out with pointed picks the holes in the cakes, which contain
the same kind of copper. The head of the round hammer is three palms and
a digit long; one end of the head is round and two digits long and
thick; the other end is chisel-shaped, and is two digits and a half
long. The sharp pointed hammer is the same length as the round hammer,
but one end is pointed, the other end is square, and gradually tapers to
a point.

The nature of copper is such that when it is "dried" it becomes ash
coloured, and since this copper contains silver, it is smelted again in
the blast furnaces.[23]

[Illustration 532 (Copper Refining Furnace): A--Hearth of the furnace.
B--Chimney. C--Common pillar. D--Other pillars. The partition wall is
behind the common pillar and not to be seen. E--Arches. F--Little walls
which protect the partition wall from injury by the fire. G--Crucibles.
H--Second long wall. I--Door. K--Spatula. L--The other spatula. M--The
broom in which is inserted a stick. N--Pestles. O--Wooden mallet.
P--Plate. Q--Stones. R--Iron rod.]

I have described sufficiently the method by which exhausted liquation
cakes are "dried"; now I will speak of the method by which they are made
into copper after they have been "dried." These cakes, in order that
they may recover the appearance of copper which they have to some extent
lost, are melted in four furnaces, which are placed against the second
long wall in the part of the building between the second and third
transverse walls. This space is sixty-three feet and two palms long, and
since each of these furnaces occupies thirteen feet, the space which is
on the right side of the first furnace, and on the left of the fourth,
are each three feet and three palms wide, and the distance between the
second and third furnace is six feet. In the middle of each of these
three spaces is a door, a foot and a half wide and six feet high, and
the middle one is common to the master of each of the furnaces. Each
furnace has its own chimney, which rises between the two long walls
mentioned above, and is supported by two arches and a partition wall.
The partition wall is between the two furnaces, and is five feet long,
ten feet high, and two feet thick; in front of it is a pillar belonging
in common to the front arches of the furnace on either side, which is
two feet and as many palms thick, three feet and a half wide. The front
arch reaches from this common pillar to another pillar that is common to
the side arch of the same furnace; this arch on the right spans from the
second long wall to the same pillar, which is two feet and as many palms
wide and thick at the bottom. The interior of the front arch is nine
feet and a palm wide, and eight feet high at its highest point; the
interior of the arch which is on the right side, is five feet and a palm
wide, and of equal height to the other, and both the arches are built of
the same height as the partition wall. Imposed upon these arches and the
partition wall are the walls of the chimney; these slope upward, and
thus contract, so that at the upper part, where the fumes are emitted,
the opening is eight feet in length, one foot and three palms in width.
The fourth wall of the chimney is built vertically upon the second long
wall. As the partition wall is common to the two furnaces, so its
superstructure is common to the two chimneys. In this sensible manner
the chimney is built. At the front each furnace is six feet two palms
long, and three feet two palms wide, and a cubit high; the back of each
furnace is against the second long wall, the front being open. The first
furnace is open and sloping at the right side, so that the slags may be
drawn out; the left side is against the partition wall, and has a little
wall built of bricks cemented together with lute; this little wall
protects the partition wall from injury by the fire. On the contrary,
the second furnace has the left side open and the right side is against
the partition wall, where also it has its own little wall which protects
the partition wall from the fire. The front of each furnace is built of
rectangular rocks; the interior of it is filled up with earth. Then in
each of the furnaces at the rear, against the second long wall, is an
aperture through an arch at the back, and in these are fixed the copper
pipes. Each furnace has a round pit, two feet and as many palms wide,
built three feet away from the partition wall. Finally, under the pit of
the furnace, at a depth of a cubit, is the hidden receptacle for
moisture, similar to the others, whose vent penetrates through the
second long wall and slopes upward to the right from the first furnace,
and to the left from the second. If copper is to be made the next day,
then the master cuts out the crucible with a spatula, the blade of which
is three digits wide and as many palms long, the iron handle being two
feet long and one and a half digits in diameter; the wooden handle
inserted into it is round, five feet long and two digits in diameter.
Then, with another cutting spatula, he makes the crucible smooth; the
blade of this spatula is a palm wide and two palms long; its handle,
partly of iron, partly of wood, is similar in every respect to the first
one. Afterward he throws pulverised clay and charcoal into the crucible,
pours water over it, and sweeps it over with a broom into which a stick
is fixed. Then immediately he throws into the crucible a powder, made of
two wheelbarrowsful of sifted charcoal dust, as many wheelbarrowsful of
pulverised clay likewise sifted, and six basketsful of river sand which
has passed through a very fine sieve. This powder, like that used by
smelters, is sprinkled with water and moistened before it is put into
the crucible, so that it may be fashioned by the hands into shapes
similar to snowballs. When it has been put in, the master first kneads
it and makes it smooth with his hands, and then pounds it with two
wooden pestles, each of which is a cubit long; each pestle has a round
head at each end, but one of these is a palm in diameter, the other
three digits; both are thinner in the middle, so that they may be held
in the hand. Then he again throws moistened powder into the crucible,
and again makes it smooth with his hands, and kneads it with his fists
and with the pestles; then, pushing upward and pressing with his
fingers, he makes the edge of the crucible smooth. After the crucible
has been made smooth, he sprinkles in dry charcoal dust, and again
pounds it with the same pestles, at first with the narrow heads, and
afterward with the wider ones. Then he pounds the crucible with a wooden
mallet two feet long, both heads of which are round and three digits in
diameter; its wooden handle is two palms long, and one and a half digits
in diameter. Finally, he throws into the crucible as much pure sifted
ashes as both hands can hold, and pours water into it, and, taking an
old linen rag, he smears the crucible over with the wet ashes. The
crucible is round and sloping. If copper is to be made from the best
quality of "dried" cakes, it is made two feet wide and one deep, but if
from other cakes, it is made a cubit wide and two palms deep. The master
also has an iron band curved at both ends, two palms long and as many
digits wide, and with this he cuts off the edges of the crucible if they
are higher than is necessary. The copper pipe is inclined, and projects
three digits from the wall, and has its upper end and both sides smeared
thick with lute, that it may not be burned; but the underside of the
pipe is smeared thinly with lute, for this side reaches almost to the
edge of the crucible, and when the crucible is full the molten copper
touches it. The wall above the pipe is smeared over with lute, lest that
should be damaged. He does the same to the other side of an iron plate,
which is a foot and three palms long and a foot high; this stands on
stones near the crucible at the side where the hearth slopes, in order
that the slag may run out under it. Others do not place the plates upon
stones, but cut out of the plate underneath a small piece, three digits
long and three digits wide; lest the plate should fall, it is supported
by an iron rod fixed in the wall at a height of two palms and the same
number of digits, and it projects from the wall three palms.

Then with an iron shovel, whose wooden handle is six feet long, he
throws live charcoal into the crucible; or else charcoal, kindled by
means of a few live coals, is added to them. Over the live charcoal he
lays "dried" cakes, which, if they were of copper of the first quality,
weigh all together three _centumpondia_, or three and a half
_centumpondia_; but if they were of copper of the second quality, then
two and a half _centumpondia_; if they were of the third quality, then
two _centumpondia_ only; but if they were of copper of very superior
quality, then they place upon it six _centumpondia_, and in this case
they make the crucible wider and deeper.[24] The lowest "dried" cake is
placed at a distance of two palms from the pipe, the rest at a greater
distance, and when the lower ones are melted the upper ones fall down
and get nearer to the pipe; if they do not fall down they must be pushed
with a shovel. The blade of the shovel is a foot long, three palms and
two digits wide, the iron part of the handle is two palms long, the
wooden part nine feet. Round about the "dried" cakes are placed large
long pieces of charcoal, and in the pipe are placed medium-sized pieces.
When all these things have been arranged in this manner, the fire must
be more violently excited by the blast from the bellows. When the copper
is melting and the coals blaze, the master pushes an iron bar into the
middle of them in order that they may receive the air, and that the
flame can force its way out. This pointed bar is two and a half feet
long, and its wooden handle four feet long. When the cakes are partly
melted, the master, passing out through the door, inspects the crucible
through the bronze pipe, and if he should find that too much of the
"slag" is adhering to the mouth of the pipe, and thus impeding the blast
of the bellows, he inserts the hooked iron bar into the pipe through the
nozzle of the bellows, and, turning this about the mouth of the pipe, he
removes the "slags" from it. The hook on this bar is two digits high;
the iron part of the handle is three feet long; the wooden part is the
same number of palms long. Now it is time to insert the bar under the
iron plate, in order that the "slags" may flow out. When the cakes,
being all melted, have run into the crucible, he takes out a sample of
copper with the third round bar, which is made wholly of iron, and is
three feet long, a digit thick, and has a steel point lest its pores
should absorb the copper. When he has compressed the bellows, he
introduces this bar as quickly as possible into the crucible through the
pipe between the two nozzles, and takes out samples two, three, or four
times, until he finds that the copper is perfectly refined. If the
copper is good it adheres easily to the bar, and two samples suffice; if
it is not good, then many are required. It is necessary to smelt it in
the crucible until the copper adhering to the bar is seen to be of a
brassy colour, and if the upper as well as the lower part of the thin
layer of copper may be easily broken, it signifies that the copper is
perfectly melted; he places the point of the bar on a small iron anvil,
and chips off the thin layer of copper from it with a hammer.[25]

[Illustration 534 (Copper Refining): A--Pointed bar. B--Thin copper
layer. C--Anvil. D--Hammer.]

[Illustration 537 (Copper Refining): A--Crucible. B--Board.
C--Wedge-shaped bar. D--Cakes of copper made by separating them with the
wedge-shaped bar. E--Tongs. F--Tub.]

If the copper is not good, the master draws off the "slags" twice, or
three times if necessary--the first time when some of the cakes have
been melted, the second when all have melted, the third time when the
copper has been heated for some time. If the copper was of good quality,
the "slags" are not drawn off before the operation is finished, but at
the time they are to be drawn off, he depresses the bar over both
bellows, and places over both a stick, a cubit long and a palm wide,
half cut away at the upper part, so that it may pass under the iron pin
fixed at the back in the perforated wood. This he does likewise when the
copper has been completely melted. Then the assistant removes the iron
plate with the tongs; these tongs are four feet three palms long, their
jaws are about a foot in length, and their straight part measures two
palms and three digits, and the curved a palm and a digit. The same
assistant, with the iron shovel, throws and heaps up the larger pieces
of charcoal into that part of the hearth which is against the little
wall which protects the other wall from injury by fire, and partly
extinguishes them by pouring water over them. The master, with a hazel
stick inserted into the crucible, stirs it twice. Afterward he draws
off the slags with a rabble, which consists of an iron blade, wide and
sharp, and of alder-wood; the blade is a digit and a half in width and
three feet long; the wooden handle inserted in its hollow part is the
same number of feet long, and the alder-wood in which the blade is fixed
must have the figure of a rhombus; it must be three palms and a digit
long, a palm and two digits wide, and a palm thick. Subsequently he
takes a broom and sweeps the charcoal dust and small coal over the whole
of the crucible, lest the copper should cool before it flows together;
then, with a third rabble, he cuts off the slags which may adhere to the
edge of the crucible. The blade of this rabble is two palms long and a
palm and one digit wide, the iron part of the handle is a foot and three
palms long, the wooden part six feet. Afterward he again draws off the
slags from the crucible, which the assistant does not quench by pouring
water upon them, as the other slags are usually quenched, but he
sprinkles over them a little water and allows them to cool. If the
copper should bubble, he presses down the bubbles with the rabble. Then
he pours water on the wall and the pipes, that it may flow down warm
into the crucible, for, the copper, if cold water were to be poured over
it while still hot, would spatter about. If a stone, or a piece of lute
or wood, or a damp coal should then fall into it, the crucible would
vomit out all the copper with a loud noise like thunder, and whatever it
touches it injures and sets on fire. Subsequently he lays a curved board
with a notch in it over the front part of the crucible; it is two feet
long, a palm and two digits wide, and a digit thick. Then the copper in
the crucible should be divided into cakes with an iron wedge-shaped bar;
this is three feet long, two digits wide, and steeled on the end for the
distance of two digits, and its wooden handle is three feet long. He
places this bar on the notched board, and, driving it into the copper,
moves it forward and back, and by this means the water flows into the
vacant space in the copper, and he separates the cake from the rest of
the mass. If the copper is not perfectly smelted the cakes will be too
thick, and cannot be taken out of the crucible easily. Each cake is
afterward seized by the assistant with the tongs and plunged into the
water in the tub; the first one is placed aside so that the master may
re-melt it again immediately, for, since some "slags" adhere to it, it
is not as perfect as the subsequent ones; indeed, if the copper is not
of good quality, he places the first two cakes aside. Then, again
pouring water over the wall and the pipes, he separates out the second
cake, which the assistant likewise immerses in water and places on the
ground together with the others separated out in the same way, which he
piles upon them. These, if the copper was of good quality, should be
thirteen or more in number; if it was not of good quality, then fewer.
If the copper was of good quality, this part of the operation, which
indeed is distributed into four parts, is accomplished by the master in
two hours; if of mediocre quality, in two and a half hours; if of bad
quality, in three. The "dried" cakes are re-melted, first in the first
crucible and then in the second. The assistant must, as quickly as
possible, quench all the cakes with water, after they have been cut out
of the second crucible. Afterward with the tongs he replaces in its
proper place the iron plate which was in front of the furnace, and
throws the charcoal back into the crucible with a shovel. Meanwhile the
master, continuing his work, removes the wooden stick from the bars of
the bellows, so that in re-melting the other cakes he may accomplish the
third part of his process; this must be carefully done, for if a
particle from any iron implement should by chance fall into the
crucible, or should be thrown in by any malevolent person, the copper
could not be made until the iron had been consumed, and therefore double
labour would have to be expended upon it. Finally, the assistant
extinguishes all the glowing coals, and chips off the dry lute from the
mouth of the copper pipe with a hammer; one end of this hammer is
pointed, the other round, and it has a wooden handle five feet long.
Because there is danger that the copper would be scattered if the
_pompholyx_ and _spodos_, which adhere to the walls and the hood erected
upon them, should fall into the crucible, he cleans them off in the
meantime. Every week he takes the copper flowers out of the tub, after
having poured off the water, for these fall into it from the cakes when
they are quenched.[26]

The bellows which this master uses differ in size from the others, for
the boards are seven and a half feet long; the back part is three feet
wide; the front, where the head is joined on is a foot, two palms and as
many digits. The head is a cubit and a digit long; the back part of it
is a cubit and a palm wide, and then becomes gradually narrower. The
nozzles of the bellows are bound together by means of an iron chain,
controlled by a thick bar, one end of which penetrates into the ground
against the back of the long wall, and the other end passes under the
beam which is laid upon the foremost perforated beams. These nozzles are
so placed in a copper pipe that they are at a distance of a palm from
the mouth; the mouth should be made three digits in diameter, that the
air may be violently expelled through this narrow aperture.

There now remain the liquation thorns, the ash-coloured copper, the
"slags," and the _cadmia_.[27] Liquation cakes are made from thorns in
the following manner.[28] There are taken three-quarters of a
_centumpondium_ of thorns, which have their origin from the cakes of
copper-lead alloy when lead-silver is liquated, and as many parts of a
_centumpondium_ of the thorns derived from cakes made from once
re-melted thorns by the same method, and to them are added a
_centumpondium_ of de-silverized lead and half a _centumpondium_ of
hearth-lead. If there is in the works plenty of litharge, it is
substituted for the de-silverized lead. One and a half _centumpondia_ of
litharge and hearth-lead is added to the same weight of primary thorns,
and half a _centumpondium_ of thorns which have their origin from
liquation cakes composed of thorns twice re-melted by the same method
(tertiary thorns), and a fourth part of a _centumpondium_ of thorns
which are produced when the exhausted liquation cakes are "dried." By
both methods one single liquation cake is made from three
_centumpondia_. In this manner the smelter makes every day fifteen
liquation cakes, more or less; he takes great care that the metallic
substances, from which the first liquation cake is made, flow down
properly and in due order into the forehearth, before the material of
which the subsequent cake is to be made. Five of these liquation cakes
are put simultaneously into the furnace in which silver-lead is liquated
from copper, they weigh almost fourteen _centumpondia_, and the "slags"
made therefrom usually weigh quite a _centumpondium_. In all the
liquation cakes together there is usually one _libra_ and nearly two
_unciae_ of silver, and in the silver-lead which drips from those cakes,
and weighs seven and a half _centumpondia_, there is in each an _uncia_
and a half of silver. In each of the three _centumpondia_ of liquation
thorns there is almost an _uncia_ of silver, and in the two
_centumpondia_ and a quarter of exhausted liquation cakes there is
altogether one and a half _unciae_; yet this varies greatly for each
variety of thorns, for in the thorns produced from primary liquation
cakes made of copper and lead when silver-lead is liquated from the
copper, and those produced in "drying" the exhausted liquation cakes,
there are almost two _unciae_ of silver; in the others not quite an
_uncia_. There are other thorns besides, of which I will speak a little
further on.

Those in the Carpathian Mountains who make liquation cakes from the
copper "bottoms" which remain after the upper part of the copper is
divided from the lower, in the furnace similar to an oven, produce
thorns when the poor or mediocre silver-lead is liquated from the
copper. These, together with those made of cakes of re-melted thorns, or
made with re-melted litharge, are placed in a heap by themselves; but
those that are made from cakes melted from hearth-lead are placed in a
heap separate from the first, and likewise those produced from "drying"
the exhausted liquation cakes are placed separately; from these thorns
liquation cakes are made. From the first heap they take the fourth part
of a _centumpondium_, from the second the same amount, from the third a
_centumpondium_,--to which thorns are added one and a half
_centumpondia_ of litharge and half a _centumpondium_ of hearth-lead,
and from these, melted in the blast furnace, a liquation cake is made;
each workman makes twenty such cakes every day. But of theirs enough has
been said for the present; I will return to ours.

The ash-coloured copper[29] which is chipped off, as I have stated, from
the "dried" cakes, used some years ago to be mixed with the thorns
produced from liquation of the copper-lead alloy, and contained in
themselves, equally with the first, two _unciae_ of silver; but now it
is mixed with the concentrates washed from the accretions and the other
material. The inhabitants of the Carpathian Mountains melt this kind of
copper in furnaces in which are re-melted the "slags" which flow out
when the copper is refined; but as this soon melts and flows down out of
the furnace, two workmen are required for the work of smelting, one of
whom smelts, while the other takes out the thick cakes from the
forehearth. These cakes are only "dried," and from the "dried" cakes
copper is again made.

The "slags"[30] are melted continually day and night, whether they have
been drawn off from the alloyed metals with a rabble, or whether they
adhered to the forehearth to the thickness of a digit and made it
smaller and were taken off with spatulas. In this manner two or three
liquation cakes are made, and afterward much or little of the "slag,"
skimmed from the molten alloy of copper and lead, is re-melted. Such
liquation cakes should weigh up to three _centumpondia_, in each of
which there is half an _uncia_ of silver. Five cakes are placed at the
same time in the furnace in which argentiferous lead is liquated from
copper, and from these are made lead which contains half an _uncia_ of
silver to the _centumpondium_. The exhausted liquation cakes are laid
upon the other baser exhausted liquation cakes, from both of which
yellow copper is made. The base thorns thus obtained are re-melted with
a few baser "slags," after having been sprinkled with concentrates from
furnace accretions and other material, and in this manner six or seven
liquation cakes are made, each of which weighs some two _centumpondia_.
Five of these are placed at the same time in the furnace in which
silver-lead is liquated from copper; these drip three _centumpondia_ of
lead, each of which contains half an _uncia_ of silver. The basest
thorns thus produced should be re-melted with only a little "slag." The
copper alloyed with lead, which flows down from the furnace into the
forehearth, is poured out with a ladle into oblong copper moulds; these
cakes are "dried" with base exhausted liquation cakes. The thorns they
produce are added to the base thorns, and they are made into cakes
according to the method I have described. From the "dried" cakes they
make copper, of which some add a small portion to the best "dried" cakes
when copper is made from them, in order that by mixing the base copper
with the good it may be sold without loss. The "slags," if they are
utilisable, are re-melted a second and a third time, the cakes made from
them are "dried," and from the "dried" cakes is made copper, which is
mixed with the good copper. The "slags," drawn off by the master who
makes copper out of "dried" cakes, are sifted, and those which fall
through the sieve into a vessel placed underneath are washed; those
which remain in it are emptied into a wheelbarrow and wheeled away to
the blast furnaces, and they are re-melted together with other "slags,"
over which are sprinkled the concentrates from washing the slags or
furnace accretions made at this time. The copper which flows out of the
furnace into the forehearth, is likewise dipped out with a ladle into
oblong copper moulds; in this way nine or ten cakes are made, which are
"dried," together with bad exhausted liquation cakes, and from these
"dried" cakes yellow[31] copper is made.

[Illustration 543 (Copper Refining): A--Furnace. B--Forehearth.
C--Oblong moulds.]

The _cadmia_,[32] as it is called by us, is made from the "slags" which
the master, who makes copper from "dried" cakes, draws off together with
other re-melted base "slags"; for, indeed, if the copper cakes made from
such "slags" are broken, the fragments are called _cadmia_; from this
and yellow copper is made _caldarium_ copper in two ways. For either two
parts of _cadmia_ are mixed with one of yellow copper in the blast
furnaces, and melted; or, on the contrary, two parts of yellow copper
with one of _cadmia_, so that the _cadmia_ and yellow copper may be well
mixed; and the copper which flows down from the furnace into the
forehearth is poured out with a ladle into oblong copper moulds heated
beforehand. These moulds are sprinkled over with charcoal dust before
the _caldarium_ copper is to be poured into them, and the same dust is
sprinkled over the copper when it is poured in, lest the _cadmia_ and
yellow copper should freeze before they have become well mixed. With a
piece of wood the assistant cleanses each cake from the dust, when it is
turned out of the mould. Then he throws it into the tub containing hot
water, for the _caldarium_ copper is finer if quenched in hot water. But
as I have so often made mention of the oblong copper moulds, I must now
speak of them a little; they are a foot and a palm long, the inside is
three palms and a digit wide at the top, and they are rounded at the
bottom.

The concentrates are of two kinds--precious and base.[33] The first are
obtained from the accretions of the blast furnace, when liquation cakes
are made from copper and lead, or from precious liquation thorns, or
from the better quality "slags," or from the best grade of concentrates,
or from the sweepings and bricks of the furnaces in which exhausted
liquation cakes are "dried"; all of these things are crushed and washed,
as I explained in Book VIII. The base concentrates are made from
accretions formed when cakes are cast from base thorns or from the worst
quality of slags. The smelter who makes liquation cakes from the
precious concentrates, adds to them three wheelbarrowsful of litharge
and four barrowsful of hearth-lead and one of ash-coloured copper, from
all of which nine or ten liquation cakes are melted out, of which five
at a time are placed in the furnace in which silver-lead is liquated
from copper; a _centumpondium_ of the lead which drips from these cakes
contains one _uncia_ of silver. The liquation thorns are placed apart
by themselves, of which one basketful is mixed with the precious thorns
to be re-melted. The exhausted liquation cakes are "dried" at the same
time as other good exhausted liquation cakes.

The thorns which are drawn off from the lead, when it is separated from
silver in the cupellation furnace[34], and the hearth-lead which remains
in the crucible in the middle part of the furnaces, together with the
hearth material which has become defective and has absorbed silver-lead,
are all melted together with a little slag in the blast furnaces. The
lead, or rather the silver-lead, which flows from the furnace into the
forehearth, is poured out into copper moulds such as are used by the
refiners; a _centumpondium_ of such lead contains four _unciae_ of
silver, or, if the hearth was defective, it contains more. A small
portion of this material is added to the copper and lead when liquation
cakes are made from them, if more were to be added the alloy would be
much richer than it should be, for which reason the wise foreman of the
works mixes these thorns with other precious thorns. The hearth-lead
which remains in the middle of the crucible, and the hearth material
which absorbs silver-lead, is mixed with other hearth-lead which remains
in the cupellation furnace crucible; and yet some cakes, made rich in
this manner, may be placed again in the cupellation furnaces, together
with the rest of the silver-lead cakes which the refiner has made.

The inhabitants of the Carpathian Mountains, if they have an abundance
of finely crushed copper[35] or lead either made from "slags," or
collected from the furnace in which the exhausted liquation cakes are
dried, or litharge, alloy them in various ways. The "first" alloy
consists of two _centumpondia_ of lead melted out of thorns, litharge,
and thorns made from hearth-lead, and of half a _centumpondium_ each of
lead collected in the furnace in which exhausted liquation cakes are
"dried," and of copper _minutum_, and from these are made liquation
cakes; the task of the smelter is finished when he has made forty
liquation cakes of this kind. The "second" alloy consists of two
_centumpondia_ of litharge, of one and a quarter _centumpondia_ of
de-silverized lead or lead from "slags," and of half a _centumpondium_
of lead made from thorns, and of as much copper _minutum_. The "third"
alloy consists of three _centumpondia_ of litharge and of half a
_centumpondium_ each of de-silverized lead, of lead made from thorns,
and of copper _minutum contusum_. Liquation cakes are made from all
these alloys; the task of the smelters is finished when they have made
thirty cakes.

The process by which cakes are made among the Tyrolese, from which they
separate the silver-lead, I have explained in Book IX.

Silver is separated from iron in the following manner. Equal portions of
iron scales and filings and of _stibium_ are thrown into an earthenware
crucible which, when covered with a lid and sealed, is placed in a
furnace, into which air is blown. When this has melted and again cooled,
the crucible is broken; the button that settles in the bottom of it,
when taken out, is pounded to powder, and the same weight of lead being
added, is mixed and melted in a second crucible; at last this button is
placed in a cupel and the lead is separated from the silver.[36]

There are a great variety of methods by which one metal is separated
from other metals, and the manner in which the same are alloyed I have
explained partly in the eighth book of _De Natura Fossilium_, and partly
I will explain elsewhere. Now I will proceed to the remainder of my
subject.

     END OF BOOK XI.


FOOTNOTES:

[1] The whole of this Book is devoted to the subject of the separation
of silver from copper by liquation, except pages 530-9 on copper
refining, and page 544 on the separation of silver from iron. We believe
a brief outline of the liquation process here will refresh the mind of
the reader, and enable him to peruse the Book with more satisfaction.
The fundamental principle of the process is that if a copper-lead alloy,
containing a large excess of lead, be heated in a reducing atmosphere,
above the melting point of lead but below that of copper, the lead will
liquate out and carry with it a large proportion of the silver. As the
results are imperfect, the process cannot be carried through in one
operation, and a large amount of bye-products is created which must be
worked up subsequently. The process, as here described, falls into six
stages. 1st, Melting the copper and lead in a blast furnace to form
"liquation cakes"--that is, the "leading." If the copper contain too
little silver to warrant liquation directly, then the copper is
previously enriched by melting and drawing off from a settling pot the
less argentiferous "tops" from the metal, liquation cakes being made
from the enriched "bottoms." 2nd, Liquation of the argentiferous lead
from the copper. This work was carried out in a special furnace, to
which the admission of air was prevented as much as possible in order to
prevent oxidation. 3rd, "Drying" the residual copper, which retained
some lead, in a furnace with a free admission of air. The temperature
was raised to a higher degree than in the liquation furnace, and the
expelled lead was oxidized. 4th, Cupellation of the argentiferous lead.
5th, Refining of the residual copper from the "drying" furnace by
oxidation of impurities and poling in a "refining furnace." 6th,
Re-alloy and re-liquation of the bye-products. These consist of: _a_,
"slags" from "leading"; _b_, "slags" from "drying"; _c_, "slags" from
refining of the copper. All of these "slags" were mainly lead oxides,
containing some cuprous oxides and silica from the furnace linings; _d_,
"thorns" from liquation; _e_, "thorns" from "drying"; _f_, "thorns" from
skimmings during cupellation; these were again largely lead oxides, but
contained rather more copper and less silica than the "slags"; _g_,
"ash-coloured copper," being scales from the "dried" copper, were
cuprous oxides, containing considerable lead oxides; _h_, concentrates
from furnace accretions, crushed bricks, &c.

The discussion of detailed features of the process has been reserved to
notes attached to the actual text, to which the reader is referred. As
to the general result of liquation, Karsten (see below) estimates the
losses in the liquation of the equivalent of 100 lbs. of argentiferous
copper to amount to 32-35 lbs. of lead and 5 to 6 lbs. of copper. Percy
(see below) quotes results at Lautenthal in the Upper Harz for the years
1857-60, showing losses of 25% of the silver, 9.1% of the copper, and
36.37 lbs. of lead to the 100 lbs. of copper, or say, 16% of the lead;
and a cost of L8 6s. per ton of copper. The theoretical considerations
involved in liquation have not been satisfactorily determined. Those who
may wish to pursue the subject will find repeated descriptions and much
discussion in the following works, which have been freely consulted in
the notes which follow upon particular features of the process. It may
be mentioned that Agricola's treatment of the subject is more able than
any down to the 18th century. Ercker (_Beschreibung Allerfuernemsten
Mineralischen_, etc., Prague, 1574). Lohneys (_Bericht vom Bergwercken_,
etc., Zellerfeldt, 1617). Schlueter (_Gruendlicher Unterricht von
Huette-Werken_, Braunschweig, 1738). _Karsten_ (_System der Metallurgie
V._ and _Archiv fuer Bergbau und Huettenwesen_, 1st series, 1825).
Berthier (_Annales des Mines_, 1825, II.). Percy (Metallurgy of Silver
and Gold, London, 1880).

NOMENCLATURE.--This process held a very prominent position in German
metallurgy for over four centuries, and came to have a well-defined
nomenclature of its own, which has never found complete equivalents in
English, our metallurgical writers to the present day adopting more or
less of the German terms. Agricola apparently found no little difficulty
in adapting Latin words to his purpose, but stubbornly adhered to his
practice of using no German at the expense of long explanatory clauses.
The following table, prepared for convenience in translation, is
reproduced. The German terms are spelled after the manner used in most
English metallurgies, some of them appear in Agricola's Glossary to _De
Re Metallica_.

  English.              Latin.                              German.

  Blast furnace         _Prima fornax_                      _Schmeltzofen_

  Liquation furnace     _Fornax in qua argentum et          _Saigernofen_
                          plumbum ab aere secernuntur_

  Drying furnace        _Fornax in qua aerei panes          _Darrofen_
                          fathiscentes torrentur_

  Refining hearth       _Fornax in qua panes aerei          _Gaarherd_
                          torrefacti coquuntur_

  Cupellation           _Secunda fornax_, or                _Treibherd_
    furnace               _fornax in qua plumbum
                          ab argento separatur_

  Leading               _Mistura_                           _Frischen_

  Liquating             _Stillare_, or _distillare_         _Saigern_

  "Drying"              _Torrere_                           _Darren_

  Refining              _Aes ex panibus torrefactis         _Gaarmachen_
                          conficere_
  Liquation cakes       _Panes ex aere ac plumbo misti_     _Saigerstock_

  Exhausted             _Panes fathiscentes_                _Kiehnstock_,
    liquation cakes                                           or _Kinstocke_

  "Dried" cakes         _Panes torrefacti_                  _Darrlinge_

  Slags from leading    _Recrementa_                        _Frischschlacke_
                          (with explanatory phrases)

  Slags from drying     _Recrementa_                        _Darrost_
                          (with explanatory phrases)

  Slags from refining   _Recrementa_                        _Gaarschlacke_
                          (with explanatory phrases)

  Liquation thorns      _Spinae_                            _Saigerdoerner_,
                          (with explanatory phrases)          or _Roestdoerner_

  Thorns from "drying"  _Spinae_                            _Darrsoehle_
                          (with explanatory phrases)

  Thorns from           _Spinae_                            _Abstrich_
    cupellation           (with explanatory phrases)

  Silver-lead or        _Stannum_                           _Saigerwerk_ or
    liquated                                                  _saigerblei_
    silver-lead

  Ash-coloured copper   _Aes cinereum_                      _Pickschiefer_
                                                              or _schifer_

  Furnace accretions    _Cadmiae_                           _Offenbrueche_
    or "accretions"

HISTORICAL NOTE.--So far as we are aware, this is the first complete
discussion of this process, although it is briefly mentioned by one
writer before Agricola--that is, by Biringuccio (III, 5, 8), who wrote
ten years before this work was sent to the printer. His account is very
incomplete, for he describes only the bare liquation, and states that
the copper is re-melted with lead and re-liquated until the silver is
sufficiently abstracted. He neither mentions "drying" nor any of the
bye-products. In his directions the silver-lead alloy was cupelled and
the copper ultimately refined, obviously by oxidation and poling,
although he omits the pole. In A.D. 1150 Theophilus (p. 305, Hendrie's
Trans.) describes melting lead out of copper ore, which would be a form
of liquation so far as separation of these two metals is concerned, but
obviously not a process for separating silver from copper. This passage
is quoted in the note on copper smelting (Note on p. 405). A process of
such well-developed and complicated a character must have come from a
period long before Agricola; but further than such a surmise, there
appears little to be recorded. Liquation has been during the last fifty
years displaced by other methods, because it was not only tedious and
expensive, but the losses of metal were considerable.

[2] _Paries_,--"Partition" or "wall." The author uses this term
throughout in distinction to _murus_, usually applying the latter to the
walls of the building and the former to furnace walls, chimney walls,
etc. In order to gain clarity, we have introduced the term "hood" in
distinction to "chimney," and so far as possible refer to the _paries_
of these constructions and furnaces as "side of the furnace," "side of
the hood," etc.

[4] From this point on, the construction of the roofs, in the absence of
illustration, is hopeless of intelligent translation. The constant
repetition of "_tignum_," "_tigillum_," "_trabs_," for at least fifteen
different construction members becomes most hopelessly involved,
especially as the author attempts to distinguish between them in a sort
of "House-that-Jack-built" arrangement of explanatory clauses.

[5] In the original text this is given as the "fifth," a manifest
impossibility.

[6] _Chelae_,--"claws."

[7] If Roman weights, this would be 5.6 short tons, and 7.5 tons if
German _centner_ is meant.

[8] This is, no doubt, a reference to Pliny's statement (XXXIII, 35)
regarding litharge at Puteoli. This passage from Pliny is given in the
footnote on p. 466. Puteoli was situated on the Bay of Naples.

[9] By this expression is apparently meant the "bottoms" produced in
enriching copper, as described on p. 510.

[10] The details of the preparation of liquation cakes--"leading"--were
matters of great concern to the old metallurgists. The size of the
cakes, the proportion of silver in the original copper and in the
liquated lead, the proportion of lead and silver left in the residual
cakes, all had to be reached by a series of compromises among militant
forces. The cakes were generally two and one-half to three and one-half
inches thick and about two feet in diameter, and weighed 225 to 375 lbs.
This size was wonderfully persistent from Agricola down to modern times;
and was, no doubt, based on sound experience. If the cakes were too
small, they required proportionately more fuel and labour; whilst if too
large, the copper began to melt before the maximum lead was liquated.
The ratio of the copper and lead was regulated by the necessity of
enough copper to leave a substantial sponge mass the shape of the
original cake, and not so large a proportion as to imprison the lead.
That is, if the copper be in too small proportion the cakes break down;
and if in too large, then insufficient lead liquates out, and the
extraction of silver decreases. Ercker (p. 106-9) insists on the
equivalent of about 3 copper to 9.5 lead; Lohneys (p. 99), 3 copper to 9
or 10 lead. Schlueter (p. 479, etc.) insists on a ration of 3 copper to
about 11 lead. Kerl (_Handbuch Der Metallurgischen Huettenkunde_, 1855;
Vol. III., p. 116) gives 3 copper to 6 to 7 parts lead. Agricola gives
variable amounts of 3 parts copper to from 8 to 12 parts lead. As to the
ratio of silver in the copper, or to the cakes, there does not, except
the limit of payability, seem to have been any difficulty on the minimum
side. On the other hand, Ercker, Lohneys, Schlueter, and Karsten all
contend that if the silver ran above a certain proportion, the copper
would retain considerable silver. These authors give the outside ratio
of silver permissible for good results in one liquation at what would be
equivalent to 45 to 65 ozs. per ton of cakes, or about 190 to 250 ozs.
per ton on the original copper. It will be seen, however, that
Agricola's cakes greatly exceed these values. A difficulty did arise
when the copper ran low in silver, in that the liquated lead was too
poor to cupel, and in such case the lead was used over again, until it
became rich enough for this purpose. According to Karsten, copper
containing less than an equivalent of 80 to 90 ozs. per ton could not be
liquated profitably, although the Upper Harz copper, according to Kerl,
containing the equivalent of about 50 ozs. per ton, was liquated at a
profit. In such a case the cakes would run only 12 to 14 ozs. per ton.
It will be noticed that in the eight cases given by Agricola the copper
ran from 97 to over 580 ozs. per ton, and in the description of
enrichment of copper "bottoms" the original copper runs 85 ozs., and "it
cannot be separated easily"; as a result, it is raised to 110 ozs. per
ton before treatment. In addition to the following tabulation of the
proportions here given by Agricola, the reader should refer to footnotes
15 and 17, where four more combinations are tabulated. It will be
observed from this table that with the increasing richness of copper an
increased proportion of lead was added, so that the products were of
similar value. It has been assumed (see footnote 13 p. 509), that Roman
weights are intended. It is not to be expected that metallurgical
results of this period will "tie up" with the exactness of the modern
operator's, and it has not been considered necessary to calculate beyond
the nearest pennyweight. Where two or more values are given by the
author the average has been taken.


                        1ST CHARGE.    2ND CHARGE.    3RD CHARGE.    4TH CHARGE.

  Amount of             211.8 lbs.     211.8 lbs.     211.8 lbs.     211.8 lbs.
   argentiferous copper

  Amount of lead        564.8  "       635.4  "       776.6  "       847.2  "

  Weight of each cake   193.5  "       211.5  "       247.1  "       264.75 "

  Average value of        56 ozs.        62 ozs.        64 ozs.        66 ozs.
   charge                   3dwts.         4dwts.         4dwts.         7dwts.

  Per cent. of copper    27.2%          25%            21.4%          20%

  Average value of       207 ozs.       251 ozs.       299 ozs.       332 ozs.
   original copper          4dwts.         3dwts.        15dwts.         3dwts.
   per ton

  Weight of             423.6 lbs.     494.2 lbs.     635.4 lbs.     706 lbs.
   argentiferous lead
   liquated out

  Average value of        79 ozs.        79 ozs.        79 ozs.        85 ozs.
   liquated lead
   per ton

  Weight of residues    353 lbs.       353 lbs.       353 lbs.       353 lbs.
   (residual copper
    and thorns)

  Average value of        34 ozs.        34 ozs.        34 ozs.      34 ozs. to
   residues per ton                                                    38 ozs.

  Extraction of          76.5%          73.4%          79%            85.3%
   silver into the
   argentiferous lead

[11] See p. 356.

[12] An analysis of this "slag" by Karsten (_Archiv_. 1st Series IX, p.
24) showed 63.2% lead oxide, 5.1% cuprous oxide, 20.1% silica (from the
fuel and furnace linings), together with some iron alumina, etc. The
_pompholyx_ and _spodos_ were largely zinc oxide (see note, p. 394).

[13] This description of a _centumpondium_ which weighed either 133-1/3
_librae_, or 146-3/4 _librae_, adds confusion to an already much mixed
subject (see Appendix C.). Assuming the German _pfundt_ to weigh 7,219
troy grains, and the Roman _libra_ 4,946 grains, then a _centner_ would
weigh 145.95 _librae_, which checks up fairly well with the second case;
but under what circumstances a _centner_ can weigh 133-1/3 _librae_ we
are unable to record. At first sight it might appear from this statement
that where Agricola uses the word _centumpondium_ he means the German
_centner_. On the other hand, in the previous five or six pages the
expressions one-third, five-sixths, ten-twelfths of a _libra_ are used,
which are even divisions of the Roman 12 _unciae_ to one _libra_, and
are used where they manifestly mean divisions of 12 units. If Agricola
had in mind the German scale, and were using the _libra_ for a _pfundt_
of 16 _untzen_, these divisions would amount to fractions, and would not
total the _sicilicus_ and _drachma_ quantities given, nor would they
total any of the possibly synonymous divisions of the German _untzen_
(see also page 254).

[14] If we assume Roman weights, the charge in the first case can be
tabulated as follows, and for convenience will be called the fifth
charge:--

                                                    5TH CHARGE (3 cakes).
  Amount of copper                                  211.8 lbs.
  Amount of lead                                    635.4 lbs.
  Weight of each cake                               282.4 lbs.
  Average value of charge                           218 ozs. 18 dwts.
  Per cent. of copper                               25%
  Average value of original copper per ton          583 ozs. 6 dwts. 16 grs.
  Weight of argentiferous lead liquated out         494.2 lbs.
  Average value of liquated lead per ton            352 ozs. 8 dwts.
  Weight of residues                                353 lbs.
  Average value of residues per ton                 20 ozs. (about).
  Extraction of silver into the argentiferous lead  94%

The results given in the second case where the copper contains 2
_librae_ and a _bes_ per _centumpondium_ do not tie together at all, for
each liquation cake should contain 3 _librae_ 9-1/2 _unciae_, instead of
1-1/2 _librae_ and 1/2 _uncia_ of silver.

[15] In this enrichment of copper by the "settling" of the silver in the
molten mass the original copper ran, in the two cases given, 60 ozs. 15
dwts. and 85 ozs. 1 dwt. per ton. The whole charge weighed 2,685 lbs.,
and contained in the second case 114 ozs. Troy, omitting fractions. On
melting, 1,060 lbs. were drawn off as "tops," containing 24 ozs. of
silver, or running 45 ozs. per ton, and there remained 1,625 lbs. of
"bottoms," containing 90 ozs. of silver, or averaging 110 ozs. per ton.
It will be noticed later on in the description of making liquation cakes
from these copper bottoms, that the author alters the value from
one-third _librae_, a _semi-uncia_ and a _drachma_ per _centumpondium_
to one-third of a _libra_, _i.e._, from 110 ozs. to 97 ozs. 4 dwts. per
ton. In the Glossary this furnace is described as a _spleisofen_,
_i.e._, a refining hearth.

[16] The latter part of this paragraph presents great difficulties. The
term "refining furnace" is given in the Latin as the "second furnace,"
an expression usually applied to the cupellation furnace. The whole
question of refining is exhaustively discussed on pages 530 to 539.
Exactly what material is meant by the term red (_rubrum_), yellow
(_fulvum_) and _caldarium_ copper is somewhat uncertain. They are given
in the German text simply as _rot_, _geel_, and _lebeter kupfer_, and
apparently all were "coarse" copper of different characters destined for
the refinery. The author states in _De Natura Fossilium_ (p. 334):
"Copper has a red colour peculiar to itself; this colour in smelted
copper is considered the most excellent. It, however, varies. In some it
is red, as in the copper smelted at Neusohl.... Other copper is prepared
in the smelters where silver is separated from copper, which is called
yellow copper (_luteum_), and is _regulare_. In the same place a dark
yellow copper is made which is called _caldarium_, taking its name among
the Germans from a caldron.... _Regulare_ differs from _caldarium_ in
that the former is not only fusible, but also malleable; while the
latter is, indeed, fusible, but is not ductile, for it breaks when
struck with the hammer." Later on in _De Re Metallica_ (p. 542) he
describes yellow copper as made from "baser" liquation thorns and from
exhausted liquation cakes made from thorns. These products were
necessarily impure, as they contained, among other things, the
concentrates from furnace accretions. Therefore, there was ample source
for zinc, arsenic or other metallics which would lighten the colour.
_Caldarium_ copper is described by Pliny (see note, p. 404), and was, no
doubt, "coarse" copper, and apparently Agricola adopted this term from
that source, as we have found it used nowhere else. On page 542 the
author describes making _caldarium_ copper from a mixture of yellow
copper and a peculiar _cadmia_, which he describes as the "slags" from
refining copper. These "slags," which are the result of oxidation and
poling, would contain almost any of the metallic impurities of the
original ore, antimony, lead, arsenic, zinc, cobalt, etc. Coming from
these two sources the _caldarium_ must have been, indeed, impure.

[17] The liquation of these low-grade copper "bottoms" required that the
liquated lead should be re-used again to make up fresh liquation cakes,
in order that it might eventually become rich enough to warrant
cupellation. In the following table the "poor" silver-lead is designated
(A) the "medium" (B) and the "rich" (C). The three charges here given
are designated sixth, seventh, and eighth for purposes of reference. It
will be seen that the data is insufficient to complete the ninth and
tenth. Moreover, while the author gives directions for making four
cakes, he says the charge consists of five, and it has, therefore, been
necessary to reduce the volume of products given to this basis.

                        6TH CHARGE.        7TH CHARGE.    8TH CHARGE.

  Amount of copper      176.5 lbs.         176.5 lbs.     176.5 lbs.
   bottoms

  Amount of lead        282.4 lbs.         564.8 lbs.       635.4 lbs.
                         (slags)            of (A)           of (B)

  Amount of             494.2 lbs.         211.8 lbs.       141.2 lbs. (A)
   de-silverized lead

  Weight of each cake   238.3 lbs.         238.3 lbs.       238.3 lbs.

  Average value of       22 ozs.            35 ozs.           50 ozs.
   charge per ton          5dwts.            15dwts.           5dwts.

  Per cent. of copper    18.5%              18.5%             18.5%

  Average value per      97 ozs.            97 ozs.           97 ozs.
   ton original copper     4dwts.            4dwts.           4dwts.

  Average value per      90 ozs.            28 ozs.           28 ozs.
   ton of                  2dwts. (slags)     5dwts. (A)       5dwts. (A)

  Average value per       3 ozs.             3 ozs.           42 ozs.
   ton of                  1dwt. (lead)        1dwt. (lead)    10dwts. (B)

  Weight of liquated    550.6 lbs.
   lead

  Average value of       28 ozs.            42 ozs.           63 ozs.
   the liquated lead       5dwts. (A)        10dwts. (B)       16dwts. (C)
   per ton

  Weight of exhausted   225.9 lbs.
    liquation cakes

  Average value of       12 ozs.
   the exhausted           3dwts.
   liquation cakes
   per ton

  Weight of liquation   169.4 lbs.
    thorns

  Average value of       18 ozs.
   the liquation           4dwts.
   thorns per ton

  Extraction of          71%
   silver into the
   liquated lead


[18] For the liquation it was necessary to maintain a reducing
atmosphere, otherwise the lead would oxidize; this was secured by
keeping the cakes well covered with charcoal and by preventing the
entrance of air as much as possible. Moreover, it was necessary to
preserve a fairly even temperature. The proportions of copper and lead
in the three liquation products vary considerably, depending upon the
method of conducting the process and the original proportions. From the
authors consulted (see note p. 492) an average would be about as
follows:--The residual copper--exhausted liquation cakes--ran from 25 to
33% lead; the liquated lead from 2 to 3% copper; and the liquation
thorns, which were largely oxidized, contained about 15% copper oxides,
80% lead oxides, together with impurities, such as antimony, arsenic,
etc. The proportions of the various products would obviously depend upon
the care in conducting the operation; too high temperature and the
admission of air would increase the copper melted and oxidize more lead,
and thus increase the liquation thorns. There are insufficient data in
Agricola to adduce conclusions as to the actual ratios produced. The
results given for the 6th charge (note 17, p. 512) would indicate about
30% lead in the residual copper, and would indicate that the original
charge was divided into about 24% of residual copper, 18% of liquation
thorns, and 57% of liquated lead. This, however, was an unusually large
proportion of liquation thorns, some of the authors giving instances of
as low as 5%.

[19] The first instance given, of 44 _centumpondia_ (3,109 lbs.) lead
and one _centumpondium_ (70.6 lbs.) copper, would indicate that the
liquated lead contained 2.2% copper. The second, of 46 _centumpondia_
(3,250 lbs.) lead and 1-1/2 _centumpondia_ copper (106 lbs.), would
indicate 3% copper; and in the third, 120 _centumpondia_ (8,478 lbs.)
lead and six copper (424 lbs.) would show 4.76% copper. This charge of
120 _centumpondia_ in the cupellation furnace would normally make more
than 110 _centumpondia_ of litharge and 30 of hearth-lead, _i.e._,
saturated furnace bottoms. The copper would be largely found in the
silver-lead "which does not melt," at the margin of the crucible. These
skimmings are afterward referred to as "thorns." It is difficult to
understand what is meant by the expression that the silver which is in
the copper is mixed with the remaining (_reliquo_) silver. The coppery
skimmings from the cupellation furnace are referred to again in Note 28,
p. 539.

[20] A further amount of lead could be obtained in the first liquation,
but a higher temperature is necessary, which was more economical to
secure in the "drying" furnace. Therefore, the "drying" was really an
extension of liquation; but as air was admitted the lead and copper
melted out were oxidized. The products were the final residual copper,
called by Agricola the "dried" copper, together with lead and copper
oxides, called by him the "slags," and the scale of copper and lead
oxides termed by him the "ash-coloured copper." The German metallurgists
distinguished two kinds of slag: the first and principal one, the
_darrost_, and the second the _darrsoehle_, this latter differing only in
that it contained more impurities from the floor of the furnace, and
remained behind until the furnace cooled. Agricola possibly refers to
these as "more liquation thorns," because in describing the treatment of
the bye-products he refers to thorns from the process, whereas in the
description of "drying" he usually refers to "slags." A number of
analyses of these products, given by Karsten, show the "dried" copper to
contain from 82.7 to 90.6% copper, and from 9.4 to 17.3% lead; the
"slag" to contain 76.5 to 85.1% lead oxide, and from 4.1 to 7.8% cuprous
oxide, with 9 to 13% silica from the furnace bottoms, together with some
other impurities; the "ash-coloured copper" to contain about 60% cuprous
oxide and 30% lead oxide, with some metallic copper and minor
impurities. An average of proportions given by various authors shows,
roughly, that out of 100 _centners_ of "exhausted" liquation cakes,
containing about 70% copper and 30% lead, there were about 63 _centners_
of "dried" copper, 38 _centners_ of "slag," and 6-1/2 _centners_ of
"ash-coloured copper." According to Karsten, the process fell into
stages; first, at low temperature some metallic lead appeared; second,
during an increasing temperature for over 14 to 15 hours the slags ran
out; third, there was a period of four hours of lower temperature to
allow time for the lead to diffuse from the interior of the cakes; and
fourth, during a period of eight hours the temperature was again
increased. In fact, the latter portion of the process ended with the
economic limit between leaving some lead in the copper and driving too
much copper into the "slags." Agricola gives the silver contents of the
"dried" copper as 3 _drachmae_ to 1 _centumpondium_, or equal to about 9
ozs. per ton; and assuming that the copper finally recovered from the
bye-products ran no higher, then the first four charges (see note on p.
506) would show a reduction in the silver values of from 95 to 97%; the
7th and 8th charges (note on p. 512) of about 90%.

[21] If Roman weights, this would equal from 6,360 lbs. to 7,066 lbs.

[22] One half _uncia_, or three _drachmae_ of silver would equal either
12 ozs. or 9 ozs. per ton. If we assume the values given for residual
copper in the first four charges (note p. 506) of 34 ozs., this would
mean an extraction of, roughly, 65% of the silver from the exhausted
liquation cakes.

[23] See note 29, p. 540.

[24]

  Assuming Roman weights: 2     _centumpondia_ = 141.3 lbs.
                          2-1/2        "       = 176.6  "
                          3            "       = 211.9  "
                          3-1/2        "       = 248.2  "
                          6            "       = 423.9  "

[25] This description of refining copper in an open hearth by oxidation
with a blast and "poling"--the _gaarmachen_ of the Germans--is so
accurate, and the process is so little changed in some parts of Saxony,
that it might have been written in the 20th century instead of the 16th.
The best account of the old practice in Saxony after Agricola is to be
found in Schlueter's _Huette Werken_ (Braunschweig, 1738, Chap. CXVIII.).
The process has largely been displaced by electrolytic methods, but is
still in use in most refineries as a step in electrolytic work. It may
be unnecessary to repeat that the process is one of subjecting the
molten mass of impure metal to a strong and continuous blast, and as a
result, not only are the impurities to a considerable extent directly
oxidized and taken off as a slag, but also a considerable amount of
copper is turned into cuprous oxide. This cuprous oxide mostly melts and
diffuses through the metallic copper, and readily parting with its
oxygen to the impurities further facilitates their complete oxidation.
The blast is continued until the impurities are practically eliminated,
and at this stage the molten metal contains a great deal of dissolved
cuprous oxide, which must be reduced. This is done by introducing a
billet of green wood ("poling"), the dry distillation of which generates
large quantities of gases, which reduce the oxide. The state of the
metal is even to-day in some localities tested by dipping into it the
point of an iron rod; if it be at the proper state the adhering copper
has a net-like appearance, should be easily loosened from the rod by
dipping in water, is of a reddish-copper colour and should be quite
pliable; if the metal is not yet refined, the sample is thick, smooth,
and detachable with difficulty; if over-refined, it is thick and
brittle. By allowing water to run on to the surface of the molten metal,
thin cakes are successively formed and taken off. These cakes were the
article known to commerce over several centuries as "rosetta copper."
The first few cakes are discarded as containing impurities or slag, and
if the metal be of good quality the cakes are thin and of a red colour.
Their colour and thinness, therefore, become a criterion of purity. The
cover of charcoal or charcoal dust maintained upon the surface of the
metal tended to retard oxidation, but prevented volatilization and
helped to secure the impurities as a slag instead. Karsten (_Archiv._,
1st series, p. 46) gives several analyses of the slag from refining
"dried" copper, showing it to contain from 51.7 to 67.4% lead oxide, 6.2
to 19.2% cuprous oxide, and 21.4 to 23.9 silica (from the furnace
bottoms), with minor quantities of iron, antimony, etc. The "bubbles"
referred to by Agricola were apparently the shower of copper globules
which takes place upon the evolution of sulphur dioxide, due to the
reaction of the cuprous oxide upon any remaining sulphide of copper when
the mass begins to cool.

HISTORICAL NOTE.--It is impossible to say how the Ancients refined
copper, beyond the fact that they often re-smelted it. Such notes as we
can find are set out in the note on copper smelting (note 42, p. 402).
The first authentic reference to poling is in Theophilus (1150 to 1200
A.D., Hendrie's translation, p. 313), which shows a very good
understanding of this method of refining copper:--"Of the Purification
of Copper. Take an iron dish of the size you wish, and line it inside
and out with clay strongly beaten and mixed, and it is carefully dried.
Then place it before a forge upon the coals, so that when the bellows
act upon it the wind may issue partly within and partly above it, and
not below it. And very small coals being placed round it, place the
copper in it equally, and add over it a heap of coals. When by blowing a
long time this has become melted, uncover it and cast immediately fine
ashes of coals over it, and stir it with a thin and dry piece of wood as
if mixing it, and you will directly see the burnt lead adhere to these
ashes like a glue, which being cast out again superpose coals, and
blowing for a long time, as at first, again uncover it, and then do as
you did before. You do this until at length by cooking it you can
withdraw the lead entirely. Then pour it over the mould which you have
prepared for this, and you will thus prove if it be pure. Hold it with
the pincers, glowing as it is, before it has become cold, and strike it
with a large hammer strongly over the anvil, and if it be broken or
split you must liquefy it anew as before. If, however, it should remain
sound, you will cool it in water, and you cook other (copper) in the
same manner." Biringuccio (III, 8) in 1540 describes the process
briefly, but omits the poling, an essential in the production of
malleable copper.

[26] _Pompholyx_ and _spodos_ were impure zinc oxides (see note 26, p.
394).

The copper flowers were no doubt cupric oxide. They were used by the
Ancients for medicinal purposes. Dioscorides (V, 48) says: "Of flowers
of copper, which some call the scrapings of old nails, the best is
friable; it is gold-coloured when rubbed, is like millet in shape and
size, is moderately bright, and somewhat astringent. It should not be
mixed with copper filings, with which it is often adulterated. But this
deception is easily detected, for when bitten in the teeth the filings
are malleable. It (the flowers) is made when the copper fused in a
furnace has run into the receptacle through the spout pertaining to it,
for then the workmen engaged in this trade cleanse it from dirt and pour
clear water over it in order to cool it; from this sudden condensation
the copper spits and throws out the aforesaid flowers." Pliny (XXXIV,
24) says: "The flower, too, of copper (_aeris flos_) is used in medicine.
This is made by fusing copper, and then removing it to another furnace,
where the repeated blast makes the metal separate into small scales like
millet, known as flowers. These scales also fall off when the cakes of
metal are cooled in water; they become red, too, like the scales of
copper known as '_lepis_,' by use of which the flowers of copper are
adulterated, it being also sold for it. These are made when hammering
the nails that are made from the cakes of copper. All these methods are
carried on in the works of Cyprus; the difference between these
substances is that the _squamae_ (copper scales) are detached from
hammering the cakes, while the flower falls off spontaneously." Agricola
(_De Nat. Fos._, p. 352) notes that "flowers of copper (_flos aeris_)
have the same properties as 'roasted copper.'"

[27] It seems scarcely necessary to discuss in detail the complicated
"flow scheme" of the various minor bye-products. They are all
re-introduced into the liquation circuit, and thereby are created other
bye-products of the same kind _ad infinitum_. Further notes are given
on:--

  Liquation thorns         Note 28.
  Slags                     "   30.
  Ash-coloured copper       "   29.
  Concentrates              "   33.
  _Cadmia_                  "   32.

There are no data given, either by Agricola or the later authors, which
allow satisfactory calculation of the relative quantities of these
products. A rough estimate from the data given in previous notes would
indicate that in one liquation only about 70% of the original copper
came out as refined copper, and that about 70% of the original lead
would go to the cupellation furnace, _i.e._, about 30% of the original
metal sent to the blast furnace would go into the "thorns," "slags," and
"ash-coloured copper." The ultimate losses were very great, as given
before (p. 491), they probably amounted to 25% of the silver, 9% copper,
and 16% of the lead.

[28] There were the following classes of thorns:--

  1st.  From liquation.
  2nd.  From drying.
  3rd.  From cupellation.

In a general way, according to the later authors, they were largely lead
oxide, and contained from 5% to 20% cuprous oxide. If a calculation be
made backward from the products given as the result of the charge
described, it would appear that in this case they must have contained at
least one-fifth copper. The silver in these liquation cakes would run
about 24 ozs. per ton, in the liquated lead about 36 ozs. per ton, and
in the liquation thorns 24 ozs. per ton. The extraction into the
liquated lead would be about 80% of the silver.

[29] The "ash-coloured copper" is a cuprous oxide, containing some 3%
lead oxide; and if Agricola means they contained two _unciae_ of silver
to the _centumpondium_, then they ran about 48 ozs. per ton, and would
contain much more silver than the mass.

[30] There are three principal "slags" mentioned--

  1st. Slag from "leading."
  2nd. Slag from "drying."
  3rd. Slag from refining the copper.

From the analyses quoted by various authors these ran from 52% to 85%
lead oxide, 5% to 30% cuprous oxide, and considerable silica from the
furnace bottoms. They were reduced in the main into liquation cakes,
although Agricola mentions instances of the metal reduced from "slags"
being taken directly to the "drying" furnace. Such liquation cakes would
run very low in silver, and at the values given only averaged 12 ozs.
per ton; therefore the liquated lead running the same value as the
cakes, or less than half that of the "poor" lead mentioned in Note 17,
p. 512, could not have been cupelled directly.

[31] See Note 16, p. 511, for discussion of yellow and _caldarium_
copper.

[32] This _cadmia_ is given in the Glossary and the German translation
as _kobelt_. A discussion of this substance is given in the note on p.
112; and it is sufficient to state here that in Agricola's time the
metal cobalt was unknown, and the substances designated _cadmia_ and
_cobaltum_ were arsenical-cobalt-zinc minerals. A metal made from "slag"
from refining, together with "base" thorns, would be very impure; for
the latter, according to the paragraph on concentrates a little later
on, would contain the furnace accretions, and would thus be undoubtedly
zincky. It is just possible that the term _kobelt_ was used by the
German smelters at this time in the sense of an epithet--"black devil"
(see Note 21, p. 214).

[33] It is somewhat difficult to see exactly the meaning of base
(_vile_) and precious (_preciosum_) in this connection. While "base"
could mean impure, "precious" could hardly mean pure, and while
"precious" could mean high value in silver, the reverse does not seem
entirely _apropos_. It is possible that "bad" and "good" would be more
appropriate terms.

[34] The skimmings from the molten lead in the early stages of
cupellation have been discussed in Note 28, p. 539. They are probably
called thorns here because of the large amount of copper in them. The
lead from liquation would contain 2% to 3% of copper, and this would be
largely recovered in these skimmings, although there would be some
copper in the furnace bottoms--hearth-lead--and the litharge. These
"thorns" are apparently fairly rich, four _unciae_ to the
_centumpondium_ being equivalent to about 97 ozs. per ton, and they are
only added to low-grade liquation material.

[35] _Particulis aeris tusi_. Unless this be the fine concentrates from
crushing the material mentioned, we are unable to explain the
expression.

[36] This operation would bring down a button of antimony under an iron
matte, by de-sulphurizing the antimony. It would seem scarcely necessary
to add lead before cupellation. This process is given in an assay
method, in the _Probierbuechlein_ (folio 31) 50 years before _De Re
Metallica_: "How to separate silver from iron: Take that silver which is
in iron _plechen_ (_plachmal_), pulverize it finely, take the same iron
or _plec_ one part, _spiesglasz_ (antimony sulphide) one part, leave
them to melt in a crucible placed in a closed _windtofen_. When it is
melted, let it cool, break the crucible, chip off the button that is in
the bottom, and melt it in a crucible with as much lead. Then break the
crucible, and seek from the button in the cupel, and you will find what
silver it contains."




BOOK XII.


Previously I have dealt with the methods of separating silver from
copper. There now remains the portion which treats of solidified juices;
and whereas they might be considered as alien to things metallic,
nevertheless, the reasons why they should not be separated from it I
have explained in the second book.

Solidified juices are either prepared from waters in which nature or art
has infused them, or they are produced from the liquid juices
themselves, or from stony minerals. Sagacious people, at first observing
the waters of some lakes to be naturally full of juices which thickened
on being dried up by the heat of the sun and thus became solidified
juices, drew such waters into other places, or diverted them into
low-lying places adjoining hills, so that the heat of the sun should
likewise cause them to condense. Subsequently, because they observed
that in this wise the solidified juices could be made only in summer,
and then not in all countries, but only in hot and temperate regions in
which it seldom rains in summer, they boiled them in vessels over a fire
until they began to thicken. In this manner, at all times of the year,
in all regions, even the coldest, solidified juices could be obtained
from solutions of such juices, whether made by nature or by art.
Afterward, when they saw juices drip from some roasted stones, they
cooked these in pots in order to obtain solidified juices in this wise
also. It is worth the trouble to learn the proportions and the methods
by which these are made.

I will therefore begin with salt, which is made from water either salty
by nature, or by the labour of man, or else from a solution of salt, or
from lye, likewise salty. Water which is salty by nature, is condensed
and converted into salt in salt-pits by the heat of the sun, or else by
the heat of a fire in pans or pots or trenches. That which is made salty
by art, is also condensed by fire and changed into salt. There should be
as many salt-pits dug as the circumstance of the place permits, but
there should not be more made than can be used, although we ought to
make as much salt as we can sell. The depth of salt-pits should be
moderate, and the bottom should be level, so that all the water is
evaporated from the salt by the heat of the sun. The salt-pits should
first be encrusted with salt, so that they may not suck up the water.
The method of pouring or leading sea-water into salt-pits is very old,
and is still in use in many places. The method is not less old, but less
common, to pour well-water into salt-pits, as was done in Babylon, for
which Pliny is the authority, and in Cappadocia, where they used not
only well-water, but also spring-water. In all hot countries salt-water
and lake-water are conducted, poured or carried into salt-pits, and,
being dried by the heat of the sun, are converted into salt.[1] While
the salt-water contained in the salt-pits is being heated by the sun, if
they be flooded with great and frequent showers of rain the evaporation
is hindered. If this happens rarely, the salt acquires a disagreeable[2]
flavour, and in this case the salt-pits have to be filled with other
sweet water.

[Illustration 547 (Salt Pans): A--Sea. B--Pool. C--Gate. D--Trenches.
E--Salt basins. F--Rake. G--Shovel.]

Salt from sea-water is made in the following manner. Near that part of
the seashore where there is a quiet pool, and there are wide, level
plains which the inundations of the sea do not overflow, three, four,
five, or six trenches are dug six feet wide, twelve feet deep, and six
hundred feet long, or longer if the level place extends for a longer
distance; they are two hundred feet distant from one another; between
these are three transverse trenches. Then are dug the principal pits, so
that when the water has been raised from the pool it can flow into the
trenches, and from thence into the salt-pits, of which there are numbers
on the level ground between the trenches. The salt-pits are basins dug
to a moderate depth; these are banked round with the earth which was dug
in sinking them or in cleansing them, so that between the basins, earth
walls are made a foot high, which retain the water let into them. The
trenches have openings, through which the first basins receive the
water; these basins also have openings, through which the water flows
again from one into the other. There should be a slight fall, so that
the water may flow from one basin into the other, and can thus be
replenished. All these things having been done rightly and in order, the
gate is raised that opens the mouth of the pool which contains sea-water
mixed with rain-water or river-water; and thus all of the trenches are
filled. Then the gates of the first basins are opened, and thus the
remaining basins are filled with the water from the first; when this
salt-water condenses, all these basins are incrusted, and thus made
clean from earthy matter. Then again the first basins are filled up from
the nearest trench with the same kind of water, and left until much of
the thin liquid is converted into vapour by the heat of the sun and
dissipated, and the remainder is considerably thickened. Then their
gates being opened, the water passes into the second basins; and when it
has remained there for a certain space of time the gates are opened, so
that it flows into the third basins, where it is all condensed into
salt. After the salt has been taken out, the basins are filled again and
again with sea-water. The salt is raked up with wooden rakes and thrown
out with shovels.

[Illustration 549 (Salt Wells): A--Shed. B--Painted signs. C--First
room. D--Middle room. E--Third room. F--Two little windows in the end
wall. G--Third little window in the roof. H--Well. I--Well of another
kind. K--Cask. L--Pole. M--Forked sticks in which the porters rest the
pole when they are tired.]

Salt-water is also boiled in pans, placed in sheds near the wells from
which it is drawn. Each shed is usually named from some animal or other
thing which is pictured on a tablet nailed to it. The walls of these
sheds are made either from baked earth or from wicker work covered with
thick mud, although some may be made of stones or bricks. When of
brick they are often sixteen feet high, and if the roof rises
twenty-four feet high, then the walls which are at the ends must be made
forty feet high, as likewise the interior partition walls. The roof
consists of large shingles four feet long, one foot wide, and two digits
thick; these are fixed on long narrow planks placed on the rafters,
which are joined at the upper end and slope in opposite directions. The
whole of the under side is plastered one digit thick with straw mixed
with lute; likewise the roof on the outside is plastered one and a half
feet thick with straw mixed with lute, in order that the shed should not
run any risk of fire, and that it should be proof against rain, and be
able to retain the heat necessary for drying the lumps of salt. Each
shed is divided into three parts, in the first of which the firewood and
straw are placed; in the middle room, separated from the first room by a
partition, is the fireplace on which is placed the caldron. To the right
of the caldron is a tub, into which is emptied the brine brought into
the shed by the porters; to the left is a bench, on which there is room
to lay thirty pieces of salt. In the third room, which is in the back
part of the house, there is made a pile of clay or ashes eight feet
higher than the floor, being the same height as the bench. The master
and his assistants, when they carry away the lumps of salt from the
caldrons, go from the former to the latter. They ascend from the right
side of the caldron, not by steps, but by a slope of earth. At the top
of the end wall are two small windows, and a third is in the roof,
through which the smoke escapes. This smoke, emitted from both the back
and the front of the furnace, finds outlet through a hood through which
it makes its way up to the windows; this hood consists of boards
projecting one beyond the other, which are supported by two small beams
of the roof. Opposite the fireplace the middle partition has an open
door eight feet high and four feet wide, through which there is a gentle
draught which drives the smoke into the last room; the front wall also
has a door of the same height and width. Both of these doors are large
enough to permit the firewood or straw or the brine to be carried in,
and the lumps of salt to be carried out; these doors must be closed when
the wind blows, so that the boiling will not be hindered. Indeed, glass
panes which exclude the wind but transmit the light, should be inserted
in the windows in the walls.

They construct the greater part of the fireplace of rock-salt and of
clay mixed with salt and moistened with brine, for such walls are
greatly hardened by the fire. These fireplaces are made eight and a half
feet long, seven and three quarters feet wide, and, if wood is burned in
them, nearly four feet high; but if straw is burned in them, they are
six feet high. An iron rod, about four feet long, is engaged in a hole
in an iron foot, which stands on the base of the middle of the furnace
mouth. This mouth is three feet in width, and has a door which opens
inward; through it they throw in the straw.

[Illustration 551 (Salt Caldron): A--Fireplace. B--Mouth of fireplace.
C--Caldron. D--Posts sunk into the ground. E--Cross-beams. F--Shorter
bars. G--Iron hooks. H--Staples. I--Longer bars. K--Iron rod bent to
support the caldron.]

The caldrons are rectangular, eight feet long, seven feet wide, and half
a foot high, and are made of sheets of iron or lead, three feet long and
of the same width, all but two digits. These plates are not very thick,
so that the water is heated more quickly by the fire, and is boiled
away rapidly. The more salty the water is, the sooner it is condensed
into salt. To prevent the brine from leaking out at the points where the
metal plates are fastened with rivets, the caldrons are smeared over
with a cement made of ox-liver and ox-blood mixed with ashes. On each
side of the middle of the furnace two rectangular posts, three feet
long, and half a foot thick and wide are set into the ground, so that
they are distant from each other only one and a half feet. Each of them
rises one and a half feet above the caldron. After the caldron has been
placed on the walls of the furnace, two beams of the same width and
thickness as the posts, but four feet long, are laid on these posts, and
are mortised in so that they shall not fall. There rest transversely
upon these beams three bars, three feet long, three digits wide, and two
digits thick, distant from one another one foot. On each of these hang
three iron hooks, two beyond the beams and one in the middle; these are
a foot long, and are hooked at both ends, one hook turning to the right,
the other to the left. The bottom hook catches in the eye of a staple,
whose ends are fixed in the bottom of the caldron, and the eye projects
from it. There are besides, two longer bars six feet long, one palm
wide, and three digits thick, which pass under the front beam and rest
upon the rear beam. At the rear end of each of the bars there is an iron
hook two feet and three digits long, the lower end of which is bent so
as to support the caldron. The rear end of the caldron does not rest on
the two rear corners of the fireplace, but is distant from the fireplace
two thirds of a foot, so that the flame and smoke can escape; this rear
end of the fireplace is half a foot thick and half a foot higher than
the caldron. This is also the thickness and height of the wall between
the caldron and the third room of the shed, to which it is adjacent.
This back wall is made of clay and ashes, unlike the others which are
made of rock-salt. The caldron rests on the two front corners and sides
of the fireplace, and is cemented with ashes, so that the flames shall
not escape. If a dipperful of brine poured into the caldron should flow
into all the corners, the caldron is rightly set upon the fireplace.

The wooden dipper holds ten Roman _sextarii_, and the cask holds eight
dippers full[3]. The brine drawn up from the well is poured into such
casks and carried by porters, as I have said before, into the shed and
poured into a tub, and in those places where the brine is very strong it
is at once transferred with the dippers into the caldron. That brine
which is less strong is thrown into a small tub with a deep ladle, the
spoon and handle of which are hewn out of one piece of wood. In this tub
rock-salt is placed in order that the water should be made more salty,
and it is then run off through a launder which leads into the caldron.
From thirty-seven dippersful of brine the master or his deputy, at Halle
in Saxony,[4] makes two cone-shaped pieces of salt. Each master has a
helper, or in the place of a helper his wife assists him in his work,
and, in addition, a youth who throws wood or straw under the caldron.
He, on account of the great heat of the workshop, wears a straw cap on
his head and a breech cloth, being otherwise quite naked. As soon as the
master has poured the first dipperful of brine into the caldron the
youth sets fire to the wood and straw laid under it. If the firewood is
bundles of faggots or brushwood, the salt will be white, but if straw is
burned, then it is not infrequently blackish, for the sparks, which are
drawn up with the smoke into the hood, fall down again into the water
and colour it black.

[Illustration 553 (Salt Caldron): A--Wooden dipper. B--Cask. C--Tub.
D--Master. E--Youth. F--Wife. G--Wooden spade. H--Boards. I--Baskets.
K--Hoe. L--Rake. M--Straw. N--Bowl. O--Bucket containing the blood.
P--Tankard which contains beer.]

In order to accelerate the condensation of the brine, when the master
has poured in two casks and as many dippersful of brine, he adds about a
Roman _cyathus_ and a half of bullock's blood, or of calf's blood, or
buck's blood, or else he mixes it into the nineteenth dipperful of
brine, in order that it may be dissolved and distributed into all the
corners of the caldron; in other places the blood is dissolved in beer.
When the boiling water seems to be mixed with scum, he skims it with a
ladle; this scum, if he be working with rock-salt, he throws into the
opening in the furnace through which the smoke escapes, and it is dried
into rock-salt; if it be not from rock-salt, he pours it on to the floor
of the workshop. From the beginning to the boiling and skimming is the
work of half-an-hour; after this it boils down for another
quarter-of-an-hour, after which time it begins to condense into salt.
When it begins to thicken with the heat, he and his helper stir it
assiduously with a wooden spatula, and then he allows it to boil for an
hour. After this he pours in a _cyathus_ and a half of beer. In order
that the wind should not blow into the caldron, the helper covers the
front with a board seven and a half feet long and one foot high, and
covers each of the sides with boards three and three quarters feet long.
In order that the front board may hold more firmly, it is fitted into
the caldron itself, and the side-boards are fixed on the front board and
upon the transverse beam. Afterward, when the boards have been lifted
off, the helper places two baskets, two feet high and as many wide at
the top, and a palm wide at the bottom, on the transverse beams, and
into them the master throws the salt with a shovel, taking half-an-hour
to fill them. Then, replacing the boards on the caldron, he allows the
brine to boil for three quarters of an hour. Afterward the salt has
again to be removed with a shovel, and when the baskets are full, they
pile up the salt in heaps.

In different localities the salt is moulded into different shapes. In
the baskets the salt assumes the form of a cone; it is not moulded in
baskets alone, but also in moulds into which they throw the salt, which
are made in the likeness of many objects, as for instance tablets.
These tablets and cones are kept in the higher part of the third room of
the house, or else on the flat bench of the same height, in order that
they may dry better in the warm air. In the manner I have described, a
master and his helper continue one after the other, alternately boiling
the brine and moulding the salt, day and night, with the exception only
of the annual feast days. No caldron is able to stand the fire for more
than half a year. The master pours in water and washes it out every
week; when it is washed out he puts straw under it and pounds it; new
caldrons he washes three times in the first two weeks, and afterward
twice. In this manner the incrustations fall from the bottom; if they
are not cleared off, the salt would have to be made more slowly over a
fiercer fire, which requires more brine and burns the plates of the
caldron. If any cracks make their appearance in the caldron they are
filled up with cement. The salt made during the first two weeks is not
so good, being usually stained by the rust at the bottom where
incrustations have not yet adhered.

Although salt made in this manner is prepared only from the brine of
springs and wells, yet it is also possible to use this method in the
case of river-, lake-, and sea-water, and also of those waters which are
artificially salted. For in places where rock-salt is dug, the impure
and the broken pieces are thrown into fresh water, which, when boiled,
condenses into salt. Some, indeed, boil sea-salt in fresh water again,
and mould the salt into the little cones and other shapes.

[Illustration 554 (Salt Boiling): A--Pool. B--Pots. C--Ladle. D--Pans.
E--Tongs.]

Some people make salt by another method, from salt water which flows
from hot springs that issue boiling from the earth. They set earthenware
pots in a pool of the spring-water, and into them they pour water
scooped up with ladles from the hot spring until they are half full. The
perpetual heat of the waters of the pool evaporates the salt water just
as the heat of the fire does in the caldrons. As soon as it begins to
thicken, which happens when it has been reduced by boiling to a third or
more, they seize the pots with tongs and pour the contents into small
rectangular iron pans, which have also been placed in the pool. The
interior of these pans is usually three feet long, two feet wide, and
three digits deep, and they stand on four heavy legs, so that the water
flows freely all round, but not into them. Since the water flows
continuously from the pool through the little canals, and the spring
always provides a new and copious supply, always boiling hot, it
condenses the thickened water poured into the pans into salt; this is at
once taken out with shovels, and then the work begins all over again. If
the salty water contains other juices, as is usually the case with hot
springs, no salt should be made from them.

[Illustration 555 (Salt Boiling): A--Pots. B--Tripod. C--Deep ladle.]

Others boil salt water, and especially sea-water, in large iron pots;
this salt is blackish, for in most cases they burn straw under them.
Some people boil in these pots the brine in which fish is pickled. The
salt which they make tastes and smells of fish.

[Illustration 556 (Salt evaporated on faggots): A--Trench. B--Vat into
which the salt water flows. C--Ladle. D--Small bucket with pole fastened
into it.]

Those who make salt by pouring brine over firewood, lay the wood in
trenches which are twelve feet long, seven feet wide, and two and one
half feet deep, so that the water poured in should not flow out. These
trenches are constructed of rock-salt wherever it is to be had, in order
that they should not soak up the water, and so that the earth should not
fall in on the front, back and sides. As the charcoal is turned into
salt at the same time as the salt liquor, the Spaniards think, as
Pliny writes[5], that the wood itself turns into salt. Oak is the best
wood, as its pure ash yields salt; elsewhere hazel-wood is lauded. But
with whatever wood it be made, this salt is not greatly appreciated,
being black and not quite pure; on that account this method of
salt-making is disdained by the Germans and Spaniards.

[Illustration 557 (Lye Making): A--Large vat. B--Plug. C--Small tub.
D--Deep ladle. E--Small vat. F--Caldron.]

The solutions from which salt is made are prepared from salty earth or
from earth rich in salt and saltpetre. Lye is made from the ashes of
reeds and rushes. The solution obtained from salty earth by boiling,
makes salt only; from the other, of which I will speak more a little
later, salt and saltpetre are made; and from ashes is derived lye, from
which its own salt is obtained. The ashes, as well as the earth, should
first be put into a large vat; then fresh water should be poured over
the ashes or earth, and it should be stirred for about twelve hours with
a stick, so that it may dissolve the salt. Then the plug is pulled out
of the large vat; the solution of salt or the lye is drained into a
small tub and emptied with ladles into small vats; finally, such a
solution is transferred into iron or lead caldrons and boiled, until the
water having evaporated, the juices are condensed into salt. The above
are the various methods for making salt. (Illustration p. 557.)

[Illustration 559 (Nitrum-pits): A--Nile. B--Nitrum-pits, such as I
conjecture them to be.[7]]

_Nitrum_[6] is usually made from _nitrous_ waters, or from solutions or
from lye. In the same manner as sea-water or salt-water is poured into
salt-pits and evaporated by the heat of the sun and changed into salt,
so the _nitrous_ Nile is led into _nitrum_ pits and evaporated by the
heat of the sun and converted into _nitrum_. Just as the sea, in
flowing of its own will over the soil of this same Egypt, is changed
into salt, so also the Nile, when it overflows in the dog days, is
converted into _nitrum_ when it flows into the _nitrum_ pits. The
solution from which _nitrum_ is produced is obtained from fresh water
percolating through _nitrous_ earth, in the same manner as lye is made
from fresh water percolating through ashes of oak or hard oak. Both
solutions are taken out of vats and poured into rectangular copper
caldrons, and are boiled until at last they condense into _nitrum_.

[Illustration 561 (Soda Making): A--Vat in which the soda is mixed.
B--Caldron. C--Tub in which _chrysocolla_ is condensed. D--Copper wires.
E--Mortar.]

Native as well as manufactured _nitrum_ is mixed in vats with urine and
boiled in the same caldrons; the decoction is poured into vats in which
are copper wires, and, adhering to them, it hardens and becomes
_chrysocolla_, which the Moors call _borax_. Formerly _nitrum_ was
compounded with Cyprian verdigris, and ground with Cyprian copper in
Cyprian mortars, as Pliny writes. Some _chrysocolla_ is made of
rock-alum and sal-ammoniac.[8]

[Illustration 563 (Saltpetre Making): A--Caldron. B--Large vat into
which sand is thrown. C--Plug. D--Tub. E--Vat containing the rods.]

Saltpetre[9] is made from a dry, slightly fatty earth, which, if it be
retained for a while in the mouth, has an acrid and salty taste. This
earth, together with a powder, are alternately put into a vat in layers
a palm deep. The powder consists of two parts of unslaked lime and three
parts of ashes of oak, or holmoak, or Italian oak, or Turkey oak, or of
some similar kind. Each vat is filled with alternate layers of these to
within three-quarters of a foot of the top, and then water is poured in
until it is full. As the water percolates through the material it
dissolves the saltpetre; then, the plug being pulled out from the vat,
the solution is drained into a tub and ladled out into small vats. If
when tested it tastes very salty, and at the same time acrid, it is
good; but, if not, then it is condemned, and it must be made to
percolate again through the same material or through a fresh lot. Even
two or three waters may be made to percolate through the same earth and
become full of saltpetre, but the solutions thus obtained must not be
mixed together unless all have the same taste, which rarely or never
happens. The first of these solutions is poured into the first vat, the
next into the second, the third into the third vat; the second and third
solutions are used instead of plain water to percolate through fresh
material; the first solution is made in this manner from both the second
and third. As soon as there is an abundance of this solution it is
poured into the rectangular copper caldron and evaporated to one half by
boiling; then it is transferred into a vat covered with a lid, in which
the earthy matter settles to the bottom. When the solution is clear it
is poured back into the same pan, or into another, and re-boiled. When
it bubbles and forms a scum, in order that it should not run over and
that it may be greatly purified, there is poured into it three or four
pounds of lye, made from three parts of oak or similar ash and one of
unslaked lime. But in the water, prior to its being poured in, is
dissolved rock-alum, in the proportion of one hundred and twenty
_librae_ of the former to five _librae_ of the latter. Shortly
afterward the solution will be found to be clear and blue. It is boiled
until the waters, which are easily volatile (_subtiles_), are
evaporated, and then the greater part of the salt, after it has settled
at the bottom of the pan, is taken out with iron ladles. Then the
concentrated solution is transferred to the vat in which rods are placed
horizontally and vertically, to which it adheres when cold, and if there
be much, it is condensed in three or four days into saltpetre. Then the
solution which has not congealed, is poured out and put on one side or
re-boiled. The saltpetre being cut out and washed with its own solution,
is thrown on to boards that it may drain and dry. The yield of saltpetre
will be much or little in proportion to whether the solution has
absorbed much or little; when the saltpetre has been obtained from lye,
which purifies itself, it is somewhat clear and pure.

The purest and most transparent, because free from salt, is made if it
is drawn off at the thickening stage, according to the following method.
There are poured into the caldron the same number of _amphorae_ of the
solution as of _congii_ of the lye of which I have already spoken, and
into the same caldron is thrown as much of the already made saltpetre as
the solution and lye will dissolve. As soon as the mixture effervesces
and forms scum, it is transferred to a vat, into which on a cloth has
been thrown washed sand obtained from a river. Soon afterward the plug
is drawn out of the hole at the bottom, and the mixture, having
percolated through the sand, escapes into a tub. It is then reduced by
boiling in one or another of the caldrons, until the greater part of the
solution has evaporated; but as soon as it is well boiled and forms
scum, a little lye is poured into it. Then it is transferred to another
vat in which there are small rods, to which it adheres and congeals in
two days if there is but little of it, or if there is much in three
days, or at the most in four days; if it does not condense, it is poured
back into the caldron and re-boiled down to half; then it is transferred
to the vat to cool. The process must be repeated as often as is
necessary.

Others refine saltpetre by another method, for with it they fill a pot
made of copper, and, covering it with a copper lid, set it over live
coals, where it is heated until it melts. They do not cement down the
lid, but it has a handle, and can be lifted for them to see whether or
not the melting has taken place. When it has melted, powdered sulphur is
sprinkled in, and if the pot set on the fire does not light it, the
sulphur kindles, whereby the thick, greasy matter floating on the
saltpetre burns up, and when it is consumed the saltpetre is pure. Soon
afterward the pot is removed from the fire, and later, when cold, the
purest saltpetre is taken out, which has the appearance of white marble,
the earthy residue then remains at the bottom. The earths from which the
solution was made, together with branches of oak or similar trees, are
exposed under the open sky and sprinkled with water containing
saltpetre. After remaining thus for five or six years, they are again
ready to be made into a solution.

Pure saltpetre which has rested many years in the earth, and that which
exudes from the stone walls of wine cellars and dark places, is mixed
with the first solution and evaporated by boiling.

Thus far I have described the methods of making _nitrum_, which are not
less varied or multifarious than those for making salt. Now I propose to
describe the methods of making alum,[10] which are likewise neither all
alike, nor simple, because it is made from boiling aluminous water until
it condenses to alum, or else from boiling a solution of alum which is
obtained from a kind of earth, or from rocks, or from pyrites, or other
minerals.

[Illustration 567 (Vitriol Making): A--Tanks. B--Stirring poles.
C--Plug. D--Trough. E--Reservoir. F--Launder. G--lead caldron. H--Wooden
tubs sunk into the earth. I--Vats in which twigs are fixed.]

This kind of earth having first been dug up in such quantity as would
make three hundred wheelbarrow loads, is thrown into two tanks; then the
water is turned into them, and if it (the earth) contains vitriol it
must be diluted with urine. The workmen must many times a day stir the
ore with long, thick sticks in order that the water and urine may be
mixed with it; then the plugs having been taken out of both tanks, the
solution is drawn off into a trough, which is carved out of one or two
trees. If the locality is supplied with an abundance of such ore, it
should not immediately be thrown into the tanks, but first conveyed into
open spaces and heaped up, for the longer it is exposed to the air and
the rain, the better it is; after some months, during which the ore has
been heaped up in open spaces into mounds, there are generated veinlets
of far better quality than the ore. Then it is conveyed into six or more
tanks, nine feet in length and breadth and five in depth, and afterward
water is drawn into them of similar solution. After this, when the water
has absorbed the alum, the plugs are pulled out, and the solution
escapes into a round reservoir forty feet wide and three feet deep. Then
the ore is thrown out of the tanks into other tanks, and water again
being run into the latter and the urine added and stirred by means of
poles, the plugs are withdrawn and the solution is run off into the same
reservoir. A few days afterward, the reservoirs containing the solution
are emptied through a small launder, and run into rectangular lead
caldrons; it is boiled in them until the greater part of the water has
evaporated. The earthy sediment deposited at the bottom of the caldron
is composed of fatty and aluminous matter, which usually consists of
small incrustations, in which there is not infrequently found a very
white and very light powder of asbestos or gypsum. The solution now
seems to be full of meal. Some people instead pour the partly evaporated
solution into a vat, so that it may become pure and clear; then pouring
it back into the caldron, they boil it again until it becomes mealy. By
whichever process it has been condensed, it is then poured into a wooden
tub sunk into the earth in order to cool it. When it becomes cold it is
poured into vats, in which are arranged horizontal and vertical twigs,
to which the alum clings when it condenses; and thus are made the small
white transparent cubes, which are laid to dry in hot rooms.

If vitriol forms part of the aluminous ore, the material is dissolved in
water without being mixed with urine, but it is necessary to pour that
into the clear and pure solution when it is to be re-boiled. This
separates the vitriol from the alum, for by this method the latter sinks
to the bottom of the caldron, while the former floats on the top; both
must be poured separately into smaller vessels, and from these into vats
to condense. If, however, when the solution was re-boiled they did not
separate, then they must be poured from the smaller vessels into larger
vessels and covered over; then the vitriol separating from the alum, it
condenses. Both are cut out and put to dry in the hot room, and are
ready to be sold; the solution which did not congeal in the vessels
and vats is again poured back into the caldron to be re-boiled. The
earth which settled at the bottom of the caldron is carried back to the
tanks, and, together with the ore, is again dissolved with water and
urine. The earth which remains in the tanks after the solution has been
drawn off is emptied in a heap, and daily becomes more and more
aluminous in the same way as the earth from which saltpetre was made,
but fuller of its juices, wherefore it is again thrown into the tanks
and percolated by water.

[Illustration 571 (Alum Making): A--Furnace. B--Enclosed space.
C--Aluminous rock. D--Deep ladle. E--Caldron. F--Launder. G--Troughs.]

Aluminous rock is first roasted in a furnace similar to a lime kiln. At
the bottom of the kiln a vaulted fireplace is made of the same kind of
rock; the remainder of the empty part of the kiln is then entirely
filled with the same aluminous rocks. Then they are heated with fire
until they are red hot and have exhaled their sulphurous fumes, which
occurs, according to their divers nature, within the space of ten,
eleven, twelve, or more hours. One thing the master must guard against
most of all is not to roast the rock either too much or too little, for
on the one hand they would not soften when sprinkled with water, and on
the other they either would be too hard or would crumble into ashes;
from neither would much alum be obtained, for the strength which they
have would be decreased. When the rocks are cooled they are drawn out
and conveyed into an open space, where they are piled one upon the other
in heaps fifty feet long, eight feet wide, and four feet high, which are
sprinkled for forty days with water carried in deep ladles. In spring
the sprinkling is done both morning and evening, and in summer at noon
besides. After being moistened for this length of time the rocks begin
to fall to pieces like slaked lime, and there originates a certain new
material of the future alum, which is soft and similar to the _liquidae
medullae_ found in the rocks. It is white if the stone was white before
it was roasted, and rose-coloured if red was mixed with the white; from
the former, white alum is obtained, and from the latter, rose-coloured.
A round furnace is made, the lower part of which, in order to be able to
endure the force of the heat, is made of rock that neither melts nor
crumbles to powder by the fire. It is constructed in the form of a
basket, the walls of which are two feet high, made of the same rock. On
these walls rests a large round caldron made of copper plates, which is
concave at the bottom, where it is eight feet in diameter. In the empty
space under the bottom they place the wood to be kindled with fire.
Around the edge of the bottom of the caldron, rock is built in
cone-shaped, and the diameter of the bottom of the rock structure is
seven feet, and of the top ten feet; it is eight feet deep. The inside,
after being rubbed over with oil, is covered with cement, so that it may
be able to hold boiling water; the cement is composed of fresh lime, of
which the lumps are slaked with wine, of iron-scales, and of sea-snails,
ground and mixed with the white of eggs and oil. The edges of the
caldron are surmounted with a circle of wood a foot thick and half a
foot high, on which the workmen rest the wooden shovels with which they
cleanse the water of earth and of the undissolved lumps of rock that
remain at the bottom of the caldron. The caldron, being thus prepared,
is entirely filled through a launder with water, and this is boiled with
a fierce fire until it bubbles. Then little by little eight wheelbarrow
loads of the material, composed of roasted rock moistened with water,
are gradually emptied into the caldron by four workmen, who, with their
shovels which reach to the bottom, keep the material stirred and mixed
with water, and by the same means they lift the lumps of undissolved
rock out of the caldron. In this manner the material is thrown in, in
three or four lots, at intervals of two or three hours more or less;
during these intervals, the water, which has been cooled by the rock and
material, again begins to boil. The water, when sufficiently purified
and ready to congeal, is ladled out and run off with launders into
thirty troughs. These troughs are made of oak, holm oak, or Turkey oak;
their interior is six feet long, five feet deep, and four feet wide. In
these the water congeals and condenses into alum, in the spring in the
space of four days, and in summer in six days. Afterward the holes at
the bottom of the oak troughs being opened, the water which has not
congealed is drawn off into buckets and poured back into the caldron; or
it may be preserved in empty troughs, so that the master of the workmen,
having seen it, may order his helpers to pour it into the caldron, for
the water which is not altogether wanting in alum, is considered better
than that which has none at all. Then the alum is hewn out with a knife
or a chisel. It is thick and excellent according to the strength of the
rock, either white or pink according to the colour of the rock. The
earthy powder, which remains three to four digits thick as the residue
of the alum at the bottom of the trough is again thrown into the caldron
and boiled with fresh aluminous material. Lastly, the alum cut out is
washed, and dried, and sold.

Alum is also made from crude pyrites and other aluminous mixtures. It is
first roasted in an enclosed area; then, after being exposed for some
months to the air in order to soften it, it is thrown into vats and
dissolved. After this the solution is poured into the leaden rectangular
pans and boiled until it condenses into alum. The pyrites and other
stones which are not mixed with alum alone, but which also contain
vitriol, as is most usually the case, are both treated in the manner
which I have already described. Finally, if metal is contained in the
pyrites and other rock, this material must be dried, and from it either
gold, silver, or copper is made in a furnace.

Vitriol[11] can be made by four different methods; by two of these
methods from water containing vitriol; by one method from a solution of
_melanteria_, _sory_ and _chalcitis_; and by another method from earth
or stones mixed with vitriol.

[Illustration 574 (Vitriol Making): A--Tunnel. B--Bucket. C--Pit.]

The vitriol water is collected into pools, and if it cannot be drained
into them, it must be drawn up and carried to them in buckets by a
workman. In hot regions or in summer, it is poured into out-of-door
pits which have been dug to a certain depth, or else it is extracted
from shafts by pumps and poured into launders, through which it flows
into the pits, where it is condensed by the heat of the sun. In cold
regions and in winter these vitriol waters are boiled down with equal
parts of fresh water in rectangular leaden caldrons; then, when cold,
the mixture is poured into vats or into tanks, which Pliny calls wooden
fish-tanks. In these tanks light cross-beams are fixed to the upper
part, so that they may be stationary, and from them hang ropes stretched
with little stones; to these the contents of the thickened solutions
congeal and adhere in transparent cubes or seeds of vitriol, like
bunches of grapes.

[Illustration 575 (Vitriol Making): A--Caldron. B--Tank. C--Cross-bars.
D--Ropes. E--Little stones.]

By the third method vitriol is made out of _melanteria_ and _sory_. If
the mines give an abundant supply of _melanteria_ and _sory_, it is
better to reject the _chalcitis_, and especially the _misy_, for from
these the vitriol is impure, particularly from the _misy_. These
materials having been dug and thrown into the tanks, they are first
dissolved with water; then, in order to recover the pyrites from which
copper is not rarely smelted and which forms a sediment at the bottom of
the tanks, the solution is transferred to other vats, which are nine
feet wide and three feet deep. Twigs and wood which float on the surface
are lifted out with a broom made of twigs, and afterward all the
sediment settles at the bottom of this vat. The solution is poured into
a rectangular leaden caldron eight feet long, three feet wide, and the
same in depth. In this caldron it is boiled until it becomes thick and
viscous, when it is poured into a launder, through which it runs into
another leaden caldron of the same size as the one described before.
When cold, the solution is drawn off through twelve little launders, out
of which it flows into as many wooden tubs four and a half feet deep and
three feet wide. Upon these tubs are placed perforated crossbars distant
from each other from four to six digits, and from the holes hang thin
laths, which reach to the bottom, with pegs or wedges driven into them.
The vitriol adheres to these laths, and within the space of a few days
congeals into cubes, which are taken away and put into a chamber having
a sloping board floor, so that the moisture which drips from the vitriol
may flow into a tub beneath. This solution is re-boiled, as is also that
solution which was left in the twelve tubs, for, by reason of its having
become too thin and liquid, it did not congeal, and was thus not
converted into vitriol.

[Illustration 576 (Vitriol Making): A--Wooden tub. B--Cross-bars.
C--Laths. D--Sloping floor of the chamber. E--Tub placed under it.]

[Illustration 577 (Vitriol Making): A--Caldron. B--Moulds. C--Cakes.]

The fourth method of making vitriol is from vitriolous earth or stones.
Such ore is at first carried and heaped up, and is then left for five or
six months exposed to the rain of spring and autumn, to the heat of
summer, and to the rime and frost of winter. It must be turned over
several times with shovels, so that the part at the bottom may be
brought to the top, and it is thus ventilated and cooled; by this means
the earth crumbles up and loosens, and the stone changes from hard to
soft. Then the ore is covered with a roof, or else it is taken away and
placed under a roof, and remains in that place six, seven, or eight
months. Afterward as large a portion as is required is thrown into a
vat, which is half-filled with water; this vat is one hundred feet
long, twenty-four feet wide, eight feet deep. It has an opening at the
bottom, so that when it is opened the dregs of the ore from which the
vitriol comes may be drawn off, and it has, at the height of one foot
from the bottom, three or four little holes, so that, when closed, the
water may be retained, and when opened the solution flows out. Thus the
ore is mixed with water, stirred with poles and left in the tank until
the earthy portions sink to the bottom and the water absorbs the juices.
Then the little holes are opened, the solution flows out of the vat, and
is caught in a vat below it; this vat is of the same length as the
other, but twelve feet wide and four feet deep. If the solution is not
sufficiently vitriolous it is mixed with fresh ore; but if it contains
enough vitriol, and yet has not exhausted all of the ore rich in
vitriol, it is well to dissolve the ore again with fresh water. As soon
as the solution becomes clear, it is poured into the rectangular leaden
caldron through launders, and is boiled until the water is evaporated.
Afterward as many thin strips of iron as the nature of the solution
requires, are thrown in, and then it is boiled again until it is thick
enough, when cold, to congeal into vitriol. Then it is poured into tanks
or vats, or any other receptacle, in which all of it that is apt to
congeal does so within two or three days. The solution which does not
congeal is either poured back into the caldron to be boiled again, or
it is put aside for dissolving the new ore, for it is far preferable to
fresh water. The solidified vitriol is hewn out, and having once more
been thrown into the caldron, is re-heated until it liquefies; when
liquid, it is poured into moulds that it may be made into cakes. If the
solution first poured out is not satisfactorily thickened, it is
condensed two or three times, and each time liquefied in the caldron and
re-poured into the moulds, in which manner pure cakes, beautiful to look
at, are made from it.

The vitriolous pyrites, which are to be numbered among the mixtures
(_mistura_), are roasted as in the case of alum, and dissolved with
water, and the solution is boiled in leaden caldrons until it condenses
into vitriol. Both alum and vitriol are often made out of these, and it
is no wonder, for these juices are cognate, and only differ in the one
point,--that the former is less, the latter more, earthy. That pyrites
which contains metal must be smelted in the furnace. In the same manner,
from other mixtures of vitriolic and metalliferous material are made
vitriol and metal. Indeed, if ores of vitriolous pyrites abound, the
miners split small logs down the centre and cut them off in lengths as
long as the drifts and tunnels are wide, in which they lay them down
transversely; but, that they may be stable, they are laid on the ground
with the wide side down and the round side up, and they touch each other
at the bottom, but not at the top. The intermediate space is filled with
pyrites, and the same crushed are scattered over the wood, so that,
coming in or going out, the road is flat and even. Since the drifts or
tunnels drip with water, these pyrites are soaked, and from them are
freed the vitriol and cognate things. If the water ceases to drip, these
dry and harden, and then they are raised from the shafts, together with
the pyrites not yet dissolved in the water, or they are carried out from
the tunnels; then they are thrown into vats or tanks, and boiling water
having been poured over them, the vitriol is freed and the pyrites are
dissolved. This green solution is transferred to other vats or tanks,
that it may be made clear and pure; it is then boiled in the lead
caldrons until it thickens; afterward it is poured into wooden tubs,
where it condenses on rods, or reeds, or twigs, into green vitriol.

Sulphur is made from sulphurous waters, from sulphurous ores, and from
sulphurous mixtures. These waters are poured into the leaden caldrons
and boiled until they condense into sulphur. From this latter, heated
together with iron-scales, and transferred into pots, which are
afterward covered with lute and refined sulphur, another sulphur is
made, which we call _caballinum_.[12]

[Illustration 579 (Sulphur Making): A--Pots having spouts. B--Pots
without spouts. C--Lids.]

The ores[13] which consist mostly of sulphur and of earth, and rarely of
other minerals, are melted in big-bellied earthenware pots. The
furnaces, which hold two of these pots, are divided into three parts;
the lowest part is a foot high, and has an opening at the front for the
draught; the top of this is covered with iron plates, which are
perforated near the edges, and these support iron rods, upon which the
firewood is placed. The middle part of the furnace is one and a half
feet high, and has a mouth in front, so that the wood may be inserted;
the top of this has rods, upon which the bottom of the pots stand. The
upper part is about two feet high, and the pots are also two feet high
and one digit thick; these have below their mouths a long, slender
spout. In order that the mouth of the pot may be covered, an earthenware
lid is made which fits into it. For every two of these pots there must
be one pot of the same size and shape, and without a spout, but having
three holes, two of which are below the mouth and receive the spouts of
the two first pots; the third hole is on the opposite side at the
bottom, and through it the sulphur flows out. In each furnace are placed
two pots with spouts, and the furnace must be covered by plates of iron
smeared over with lute two digits thick; it is thus entirely closed in,
but for two or three vent-holes through which the mouths of the pots
project. Outside of the furnace, against one side, is placed the pot
without a spout, into the two holes of which the two spouts of the other
pots penetrate, and this pot should be built in at both sides to keep it
steady. When the sulphur ore has been placed in the pots, and these
placed in the furnace, they are closely covered, and it is desirable to
smear the joint over with lute, so that the sulphur will not exhale, and
for the same reason the pot below is covered with a lid, which is also
smeared with lute. The wood having been kindled, the ores are heated
until the sulphur is exhaled, and the vapour, arising through the spout,
penetrates into the lower pot and thickens into sulphur, which falls to
the bottom like melted wax. It then flows out through the hole, which,
as I said, is at the bottom of this pot; and the workman makes it into
cakes, or thin sticks or thin pieces of wood are dipped in it. Then he
takes the burning wood and glowing charcoal from the furnace, and when
it has cooled, he opens the two pots, empties the residues, which, if
the ores were composed of sulphur and earth, resemble naturally
extinguished ashes; but if the ores consisted of sulphur and earth and
stone, or sulphur and stone only, they resemble earth completely dried
or stones well roasted. Afterward the pots are re-filled with ore, and
the whole work is repeated.

[Illustration 581 (Sulphur Making): A--Long wall. B--High walls. C--Low
walls. D--Plates. E--Upper pots. F--Lower pots.]

The sulphurous mixture, whether it consists of stone and sulphur only,
or of stone and sulphur and metal, may be heated in similar pots, but
with perforated bottoms. Before the furnace is constructed, against the
"second" wall of the works two lateral partitions are built seven feet
high, three feet long, one and a half feet thick, and these are distant
from each other twenty-seven feet. Between them are seven low brick
walls, that measure but two feet and the same number of digits in
height, and, like the other walls, are three feet long and one foot
thick; these little walls are at equal distances from one another,
consequently they will be two and one half feet apart. At the top, iron
bars are fixed into them, which sustain iron plates three feet long and
wide and one digit thick, so that they can bear not only the weight of
the pots, but also the fierceness of the fire. These plates have in the
middle a round hole one and a half digits wide; there must not be more
than eight of these, and upon them as many pots are placed. These pots
are perforated at the bottom, and the same number of whole pots are
placed underneath them; the former contain the mixture, and are covered
with lids; the latter contain water, and their mouths are under the
holes in the plates. After wood has been arranged round the upper pots
and ignited, the mixture being heated, red, yellow, or green sulphur
drips from it and flows down through the hole, and is caught by the pots
placed underneath the plates, and is at once cooled by the water. If the
mixture contains metal, it is reserved for smelting, and, if not, it is
thrown away. The sulphur from such a mixture can best be extracted if
the upper pots are placed in a vaulted furnace, like those which I
described among other metallurgical subjects in Book VIII., which has no
floor, but a grate inside; under this the lower pots are placed in the
same manner, but the plates must have larger holes.

[Illustration 582 (Bitumen Making): A--Lower pot. B--Upper pot. C--Lid.]

Others bury a pot in the ground, and place over it another pot with a
hole at the bottom, in which pyrites or _cadmia_, or other sulphurous
stones are so enclosed that the sulphur cannot exhale. A fierce fire
heats the sulphur, and it drips away and flows down into the lower pot,
which contains water. (Illustration p. 582).

[Illustration 583 (Bitumen Making): A--Bituminous spring. B--Bucket.
C--Pot. D--Lid.]

Bitumen[14] is made from bituminous waters, from liquid bitumen, and
from mixtures of bituminous substances. The water, bituminous as well as
salty, at Babylon, as Pliny writes, was taken from the wells to the
salt works and heated by the great heat of the sun, and condensed partly
into liquid bitumen and partly into salt. The bitumen being lighter,
floats on the top, while the salt being heavier, sinks to the bottom.
Liquid bitumen, if there is much floating on springs, streams and
rivers, is drawn up in buckets or other vessels; but, if there is
little, it is collected with goose wings, pieces of linen, _ralla_,
shreds of reeds, and other things to which it easily adheres, and it is
boiled in large brass or iron pots by fire and condensed. As this
bitumen is put to divers uses, some mix pitch with the liquid, others
old cart-grease, in order to temper its viscosity; these, however long
they are boiled in the pots, cannot be made hard. The mixtures
containing bitumen are also treated in the same manner as those
containing sulphur, in pots having a hole in the bottom, and it is rare
that such bitumen is not highly esteemed.

[Illustration 585 (Chrysocolla Making): A--Mouth of the tunnel.
B--Trough. C--Tanks. D--Little trough.]

Since all solidified juices and earths, if abundantly and copiously
mixed with the water, are deposited in the beds of springs, streams or
rivers, and the stones therein are coated by them, they do not require
the heat of the sun or fire to harden them. This having been pondered
over by wise men, they discovered methods by which the remainder of
these solidified juices and unusual earths can be collected. Such
waters, whether flowing from springs or tunnels, are collected in many
wooden tubs or tanks arranged in consecutive order, and deposit in them
such juices or earths; these being scraped off every year, are
collected, as _chrysocolla_[15] in the Carpathians and as ochre in the
Harz.

There remains glass, the preparation of which belongs here, for the
reason that it is obtained by the power of fire and subtle art from
certain solidified juices and from coarse or fine sand. It is
transparent, as are certain solidified juices, gems, and stones; and can
be melted like fusible stones and metals. First I must speak of the
materials from which glass is made; then of the furnaces in which it is
melted; then of the methods by which it is produced.

It is made from fusible stones and from solidified juices, or from other
juicy substances which are connected by a natural relationship. Stones
which are fusible, if they are white and translucent, are more excellent
than the others, for which reason crystals take the first place. From
these, when pounded, the most excellent transparent glass was made in
India, with which no other could be compared, as Pliny relates. The
second place is accorded to stones which, although not so hard as
crystal, are yet just as white and transparent. The third is given to
white stones, which are not transparent. It is necessary, however, first
of all to heat all these, and afterward they are subjected to the pestle
in order to break and crush them into coarse sand, and then they are
passed through a sieve. If this kind of coarse or fine sand is found by
the glass-makers near the mouth of a river, it saves them much labour in
burning and crushing. As regards the solidified juices, the first place
is given to soda; the second to white and translucent rock-salt; the
third to salts which are made from lye, from the ashes of the musk ivy,
or from other salty herbs. Yet there are some who give to this latter,
and not to the former, the second place. One part of coarse or fine sand
made from fusible stones should be mixed with two parts of soda or of
rock-salt or of herb salts, to which are added minute particles of
_magnes_.[16] It is true that in our day, as much as in ancient times,
there exists the belief in the singular power of the latter to attract
to itself the vitreous liquid just as it does iron, and by attracting it
to purify and transform green or yellow into white; and afterward fire
consumes the _magnes_. When the said juices are not to be had, two parts
of the ashes of oak or holmoak, or of hard oak or Turkey oak, or if
these be not available, of beech or pine, are mixed with one part of
coarse or fine sand, and a small quantity of salt is added, made from
salt water or sea-water, and a small particle of _magnes_; but these
make a less white and translucent glass. The ashes should be made from
old trees, of which the trunk at a height of six feet is hollowed out
and fire is put in, and thus the whole tree is consumed and converted
into ashes. This is done in winter when the snow lies long, or in summer
when it does not rain, for the showers at other times of the year, by
mixing the ashes with earth, render them impure; for this reason, at
such times, these same trees are cut up into many pieces and burned
under cover, and are thus converted into ashes.

[Illustration 587 (Glass-making Furnace): A--Lower chamber of the first
furnace. B--Upper chamber. C--Vitreous mass.]

Some glass-makers use three furnaces, others two, others only one. Those
who use three, melt the material in the first, re-melt it in the second,
and in the third they cool the glowing glass vessels and other
articles. Of these the first furnace must be vaulted and similar to an
oven. In the upper chamber, which is six feet long, four feet wide, and
two feet high, the mixed materials are heated by a fierce fire of dry
wood until they melt and are converted into a vitreous mass. And if they
are not satisfactorily purified from dross, they are taken out and
cooled and broken into pieces; and the vitreous pieces are heated in
pots in the same furnace.

[Illustration 588 (Glass-making Furnace): A--Arches of the second
furnace. B--Mouth of the lower chamber. C--Windows of the upper chamber.
D--Big-bellied pots. E--Mouth of the third furnace. F--Recesses for the
receptacles. G--Openings in the upper chamber. H--Oblong receptacles.]

The second furnace is round, ten feet in diameter and eight feet high,
and on the outside, so that it may be stronger, it is encompassed by
five arches, one and one half feet thick; it consists in like manner of
two chambers, of which the lower one is vaulted and is one and one half
feet thick. In front this chamber has a narrow mouth, through which the
wood can be put into the hearth, which is on the ground. At the top and
in the middle of its vault, there is a large round hole which opens to
the upper chamber, so that the flames can penetrate into it. Between the
arches in the walls of the upper chamber are eight windows, so large
that the big-bellied pots may be placed through them on to the floor of
the chamber, around the large hole. The thickness of these pots is about
two digits, their height the same number of feet, and the diameter of
the belly one and a half feet, and of the mouth and bottom one foot. In
the back part of the furnace is a rectangular hole, measuring in height
and width a palm, through which the heat penetrates into a third furnace
which adjoins it.

This third furnace is rectangular, eight feet long and six feet wide; it
also consists of two chambers, of which the lower has a mouth in front,
so that firewood may be placed on the hearth which is on the ground. On
each side of this opening in the wall of the lower chamber is a recess
for oblong earthenware receptacles, which are about four feet long, two
feet high, and one and a half feet wide. The upper chamber has two
holes, one on the right side, the other on the left, of such height and
width that earthenware receptacles may be conveniently placed in them.
These latter receptacles are three feet long, one and a half feet high,
the lower part one foot wide, and the upper part rounded. In these
receptacles the glass articles, which have been blown, are placed so
that they may cool in a milder temperature; if they were not cooled
slowly they would burst asunder. When the vessels are taken from the
upper chamber, they are immediately placed in the receptacles to cool.

[Illustration 589 (Glass-making Furnaces): A--Lower chamber of the
other second furnace. B--Middle one. C--Upper one. D--Its opening.
E--Round opening. F--Rectangular opening.]

Some who use two furnaces partly melt the mixture in the first, and not
only re-melt it in the second, but also replace the glass articles
there. Others partly melt and re-melt the material in different chambers
of the second furnace. Thus the former lack the third furnace, and the
latter, the first. But this kind of second furnace differs from the
other second furnace, for it is, indeed, round, but the interior is
eight feet in diameter and twelve feet high, and it consists of three
chambers, of which the lowest is not unlike the lowest of the other
second furnace. In the middle chamber wall there are six arched
openings, in which are placed the pots to be heated, and the remainder
of the small windows are blocked up with lute. In the middle top of the
middle chamber is a square opening a palm in length and width. Through
this the heat penetrates into the upper chamber, of which the rear part
has an opening to receive the oblong earthenware receptacles, in which
are placed the glass articles to be slowly cooled. On this side, the
ground of the workshop is higher, or else a bench is placed there, so
that the glass-makers may stand upon it to stow away their products more
conveniently.

Those who lack the first furnace in the evening, when they have
accomplished their day's work, place the material in the pots, so that
the heat during the night may melt it and turn it into glass. Two boys
alternately, during night and day, keep up the fire by throwing dry wood
on to the hearth. Those who have but one furnace use the second sort,
made with three chambers. Then in the evening they pour the material
into the pots, and in the morning, having extracted the fused material,
they make the glass objects, which they place in the upper chamber, as
do the others.

The second furnace consists either of two or three chambers, the first
of which is made of unburnt bricks dried in the sun. These bricks are
made of a kind of clay that cannot be easily melted by fire nor resolved
into powder; this clay is cleaned of small stones and beaten with rods.
The bricks are laid with the same kind of clay instead of lime. From the
same clay the potters also make their vessels and pots, which they dry
in the shade. These two parts having been completed, there remains the
third.

[Illustration 591 (Glass Making): A--Blow-pipe. B--Little window.
C--Marble. D--Forceps. E--Moulds by means of which the shapes are
produced.]

The vitreous mass having been made in the first furnace in the manner I
described, is broken up, and the assistant heats the second furnace, in
order that the fragments may be re-melted. In the meantime, while they
are doing this, the pots are first warmed by a slow fire in the first
furnace, so that the vapours may evaporate, and then by a fiercer fire,
so that they become red in drying. Afterward the glass-makers open the
mouth of the furnace, and, seizing the pots with tongs, if they have not
cracked and fallen to pieces, quickly place them in the second furnace,
and they fill them up with the fragments of the heated vitreous mass or
with glass. Afterward they close up all the windows with lute and
bricks, with the exception that in each there are two little windows
left free; through one of these they inspect the glass contained in the
pot, and take it up by means of a blow-pipe; in the other they rest
another blow-pipe, so that it may get warm. Whether it is made of brass,
bronze, or iron, the blow-pipe must be three feet long. In front of
the window is inserted a lip of marble, on which rests the heaped-up
clay and the iron shield. The clay holds the blow-pipe when it is put
into the furnace, whereas the shield preserves the eyes of the
glass-maker from the fire. All this having been carried out in order,
the glass-makers bring the work to completion. The broken pieces they
re-melt with dry wood, which emits no smoke, but only a flame. The
longer they re-melt it, the purer and more transparent it becomes, the
fewer spots and blisters there are, and therefore the glass-makers can
carry out their work more easily. For this reason those who only melt
the material from which glass is made for one night, and then
immediately make it up into glass articles, make them less pure and
transparent than those who first produce a vitreous mass and then
re-melt the broken pieces again for a day and a night. And, again, these
make a less pure and transparent glass than do those who melt it again
for two days and two nights, for the excellence of the glass does not
consist solely in the material from which it is made, but also in the
melting. The glass-makers often test the glass by drawing it up with the
blowpipes; as soon as they observe that the fragments have been
re-melted and purified satisfactorily, each of them with another
blow-pipe which is in the pot, slowly stirs and takes up the glass which
sticks to it in the shape of a ball like a glutinous, coagulated gum. He
takes up just as much as he needs to complete the article he wishes to
make; then he presses it against the lip of marble and kneads it round
and round until it consolidates. When he blows through the pipe he blows
as he would if inflating a bubble; he blows into the blow-pipe as often
as it is necessary, removing it from his mouth to re-fill his cheeks, so
that his breath does not draw the flames into his mouth. Then, twisting
the lifted blow-pipe round his head in a circle, he makes a long glass,
or moulds the same in a hollow copper mould, turning it round and round,
then warming it again, blowing it and pressing it, he widens it into the
shape of a cup or vessel, or of any other object he has in mind. Then he
again presses this against the marble to flatten the bottom, which he
moulds in the interior with his other blow-pipe. Afterward he cuts out
the lip with shears, and, if necessary, adds feet and handles. If it so
please him, he gilds it and paints it with various colours. Finally, he
lays it in the oblong earthenware receptacle, which is placed in the
third furnace, or in the upper chamber of the second furnace, that it
may cool. When this receptacle is full of other slowly-cooled articles,
he passes a wide iron bar under it, and, carrying it on the left arm,
places it in another recess.

The glass-makers make divers things, such as goblets, cups, ewers,
flasks, dishes, plates, panes of glass, animals, trees, and ships, all
of which excellent and wonderful works I have seen when I spent two
whole years in Venice some time ago. Especially at the time of the Feast
of the Ascension they were on sale at Morano, where are located the most
celebrated glass-works. These I saw on other occasions, and when, for a
certain reason, I visited Andrea Naugerio in his house which he had
there, and conversed with him and Francisco Asulano.

     END OF BOOK XII.


FOOTNOTES:

[1] The history of salt-making in salt-pans, from sea-water or salt
springs, goes further back than human records. From an historical point
of view the real interest attached to salt lies in the bearing which
localities rich in either natural salt or salt springs, have had upon
the movements of the human race. Many ancient trade routes have been due
to them, and innumerable battles have been fought for their possession.
Salt has at times served for currency, and during many centuries in
nearly every country has served as a basis of taxation. These subjects
do not, however, come within the scope of this text. For the quotation
from Pliny referred to, see Note 14 below, on bitumen.

[2] The first edition gives _graviorem_, the latter editions
_gratiorem_, which latter would have quite the reverse meaning from the
above.

[3] The following are approximately the English equivalents:--

                                     Pints.   Quarts.  Gallons.
   1 _Cyathus_                        .08
   3 _Cyathi_    = 1 _Quartarius_     .24
   4 _Quartarii_ = 1 _Sextarius_      .99
   6 _Sextarii_  = 1 _Congius_       5.94      2.97
  16 _Sextarii_  = 1 _Modius_       15.85      7.93      1.98
   8 _Congii_    = 1 _Amphora_      47.57     23.78      5.94

The dipper mentioned would thus hold about one and one quarter gallons,
and the cask ten gallons.

[4] The salt industry, founded upon salt springs, is still of importance
to this city. It was a salt centre of importance to the Germanic tribes
before Charles, the son of Charlemagne, erected a fortress here in 806.
Mention of the salt works is made in the charter by Otto I., conveying
the place to the Diocese of Magdeburg, in 968.

[5] Pliny XXXI., 39-40. "In the Gallic provinces in Germany they pour
salt water upon burning wood. The Spaniards in a certain place draw the
brine from wells, which they call _Muria_. They indeed think that the
wood turns to salt, and that the oak is the best, being the kind which
is itself salty. Elsewhere the hazel is praised. Thus the charcoal even
is turned into salt when it is steeped in brine. Whenever salt is made
with wood it is black."

[6] We have elsewhere in this book used the word "soda" for the Latin
term _nitrum_, because we believe as used by Agricola it was always
soda, and because some confusion of this term with its modern adaptation
for saltpetre (nitre) might arise in the mind of the reader.
Fortunately, Agricola usually carefully mentions other alkalis, such as
the product from lixiviation of ashes, separately from his _nitrum_. In
these paragraphs, however, he has soda and potash hopelessly mixed,
wherefore we have here introduced the Latin term. The actual difference
between potash and soda--the _nitrum_ of the Ancients, and the _alkali_
of Geber (and the glossary of Agricola), was not understood for two
hundred years after Agricola, when Duhamel made his well-known
determinations; and the isolation of sodium and potassium was, of
course, still later by fifty years. If the reeds and rushes described in
this paragraph grew near the sea, the salt from lixiviation would be
soda, and likewise the Egyptian product was soda, but the lixiviation of
wood-ash produces only potash; as seen above, all are termed _nitrum_
except the first.

HISTORICAL NOTES.--The word _nitrum_, _nitron_, _nitri_, _neter_,
_nether_, or similar forms, occurs in innumerable ancient writings.
Among such references are Jeremiah (II., 22) Proverbs (XXV., 20),
Herodotus (II., 86, 87), Aristotle (_Prob._ I., 39, _De Mirab._ 54),
Theophrastus (_De Igne_ 435 ed. Heinsii, Hist. Plants III., 9),
Dioscorides (V., 89), Pliny (XIV., 26, and XXXI., 46). A review of
disputations on what salts this term comprised among the Ancients would
itself fill a volume, but from the properties named it was no doubt
mostly soda, more rarely potash, and sometimes both mixed with common
salt. There is every reason to believe from the properties and uses
mentioned, that it did not generally comprise nitre (saltpetre)--into
which superficial error the nomenclature has led many translators. The
preparation by way of burning, and the use of _nitrum_ for purposes for
which we now use soap, for making glass, for medicines, cosmetics,
salves, painting, in baking powder, for preserving food, embalming,
etc., and the descriptions of its taste in "nitrous" waters,--all answer
for soda and potash, but not for saltpetre. It is possible that the
common occurrence of saltpetre as an efflorescence on walls might
naturally lead to its use, but in any event its distinguishing
characteristics are nowhere mentioned. As sal-ammoniac occurred in the
volcanoes in Italy, it also may have been included in the _nitrum_
mentioned. _Nitrum_ was in the main exported from Egypt, but
Theophrastus mentions its production from wood-ash, and Pliny very
rightly states that burned lees of wine (argol) had the nature of
_nitrum_. Many of the ancient writers understood that it was rendered
more caustic by burning, and still more so by treatment with lime.
According to Beckmann (Hist. of Inventions II., p. 488), the form of the
word _natron_ was first introduced into Europe by two travellers in
Egypt, Peter Ballon and Prosper Alpinus, about 1550. The word was
introduced into mineralogy by Linnaeus in 1736. In the first instance
_natron_ was applied to soda and potash in distinction to _nitre_ for
saltpetre, and later _natron_ was applied solely to soda.

It is desirable to mention here two other forms of soda and potash which
are frequently mentioned by Agricola. "Ashes which wool dyers use"
(_cineres quo infectores lanarum utuntur_).--There is no indication in
any of Agricola's works as to whether this was some special wood-ash or
whether it was the calcined residues from wool washing. The "yolk" or
"suint" of wool, originating from the perspiration of the animal, has
long been a source of crude potash. The water, after washing the wool,
is evaporated, and the residue calcined. It contains about 85%
K_{2}CO_{3}, the remainder being sodium and potassium sulphates. Another
reason for assuming that it was not a wood-ash product, is that these
products are separately mentioned. In either event, whether obtained
from wool residues or from lixiviation of wood-ash, it would be an
impure potash. In some methods of wool dyeing, a wash of soda was first
given, so that it is barely possible that this substance was sodium
carbonate.

"Salt made from the ashes of musk ivy" (_sal ex anthyllidis cinere
factus_,--Glossary, _salalkali_). This would be largely potash.

[7] This wondrous illustration of soda-making from Nile water is no
doubt founded upon Pliny (XXXI., 46). "It is made in almost the same
manner as salt, except that sea-water is put into salt pans, whereas in
the nitrous pans it is water of the Nile; these, with the subsidence of
the Nile during the forty days, are impregnated with _nitrum_."

[8] This paragraph displays hopeless ignorance. Borax was known to
Agricola and greatly used in his time; it certainly was not made from
these compounds, but was imported from Central Asia. Sal-ammoniac was
also known in his time, and was used like borax as a soldering agent.
The reaction given by Agricola would yield free ammonia. The following
historical notes on borax and sal-ammoniac may be of service.

BORAX.--The uncertainties of the ancient distinctions in salts involve
borax deeply. The word _Baurach_ occurs in Geber and the other early
Alchemistic writings, but there is nothing to prove that it was modern
borax. There cannot be the slightest doubt, however, that the material
referred to by Agricola as _borax_ was our borax, because of the
characteristic qualities incidentally mentioned in Book VII. That he
believed it was an artificial product from _nitrum_ is evident enough
from his usual expression "_chrysocolla_ made from _nitrum_, which the
Moors call _borax_." Agricola, in _De Natura Fossilium_ (p. 206-7),
makes the following statements, which could leave no doubt on the
subject:--"Native _nitrum_ is found in the earth or on the surface....
It is from this variety that the Venetians make _chrysocolla_, which I
call _borax_.... The second variety of artificial _nitrum_ is made at
the present day from the native _nitrum_, called by the Arabs _tincar_,
but I call it usually by the Greek name _chrysocolla_; it is really the
Arabic _borax_.... This _nitrum_ does not decrepitate nor fly out of the
fire; however, the native variety swells up from within." The
application of the word _chrysocolla_ (_chrysos_, gold; _colla_, solder)
to soldering materials, and at the same time to the copper mineral, is
of Greek origin. If any further proof were needed as to the substance
meant by Agricola, it lies in the word _tincar_. For a long time the
borax of Europe was imported from Central Asia, through Constantinople
and Venice, under the name of _tincal_ or _tincar_. When this trade
began, we do not know; evidently before Agricola's time. The statement
here of making borax from alum and sal-ammoniac is identical with the
assertion of Biringuccio (II., 9).

SAL-AMMONIAC.--The early history of this--ammonium chloride--is also
under a cloud. Pliny (XXXI., 39) speaks of a _sal-hammoniacum_, and
Dioscorides (V., 85) uses much the same word. Pliny describes it as from
near the temple of Ammon in Egypt. None of the distinctive
characteristics of sal-ammoniac are mentioned, and there is every reason
to believe it was either common salt or soda. Herodotus, Strabo, and
others mention common salt sent from about the same locality. The first
authentic mention is in Geber, who calls it _sal-ammoniacum_, and
describes a method of making, and several characteristic reactions. It
was known in the Middle Ages under various names, among them
_sal-aremonicum_. Agricola (_De Nat. Fos._, III., p. 206) notes its
characteristic quality of volatilization. "Sal-ammoniac ... in the fire
neither crackles nor flies out, but is totally consumed." He also says
(p. 208): "Borax is used by goldsmiths to solder gold, likewise silver.
The artificers who make iron needles (tacks?) similarly use sal-ammoniac
when they cover the heads with tin." The statement from Pliny mentioned
in this paragraph is from XXXIII., 29, where he describes the
_chrysocolla_ used as gold solder as made from verdigris, _nitrum_, and
urine in the way quoted. It is quite possible that this solder was
sal-ammoniac, though not made in quite this manner. Pliny refers in
several places (XXXIII., 26, 27, 28, and 29, XXXV., 28, etc.) to
_chrysocolla_, about which he is greatly confused as between
gold-solder, the copper mineral, and a green pigment, the latter being
of either mineral origin.

[9] Saltpetre was secured in the Middle Ages in two ways, but mostly
from the treatment of calcium nitrate efflorescence on cellar and
similar walls, and from so-called saltpetre plantations. In this
description of the latter, one of the most essential factors is omitted
until the last sentence, _i.e._, that the nitrous earth was the result
of the decay of organic or animal matter over a long period. Such
decomposition, in the presence of potassium and calcium carbonates--the
lye and lime--form potassium and calcium nitrates, together with some
magnesium and sodium nitrates. After lixiviation, the addition of lye
converts the calcium and magnesium nitrates into saltpetre, _i.e._,
Ca(NO_{3})_{2} + K_{2}CO_{3} = CaCO_{3} + 2KNO_{3}. The carbonates
precipitate out, leaving the saltpetre in solution, from which it was
evaporated and crystallized out. The addition of alum as mentioned would
scarcely improve the situation.

The purification by repeated re-solution and addition of lye, and
filtration, would eliminate the remaining other salts. The purification
with sulphur, however, is more difficult to understand. In this case the
saltpetre is melted and the sulphur added and set alight. Such an
addition to saltpetre would no doubt burn brilliantly. The potassium
sulphate formed would possibly settle to the bottom, and if the "greasy
matter" were simply organic impurities, they might be burned off. This
method of refining appears to have been copied from Biringuccio (X., 1),
who states it in almost identical terms.

HISTORICAL NOTE.--As mentioned in Note 6 above, it is quite possible
that the Ancients did include efflorescence of walls under _nitrum_;
but, so far as we are aware, no specific mention of such an occurrence
of _nitrum_ is given, and, as stated before, there is every reason to
believe that all the substances under that term were soda and potash.
Especially the frequent mention of the preparation of _nitrum_ by way of
burning, argues strongly against saltpetre being included, as they would
hardly have failed to notice the decrepitation. Argument has been put
forward that Greek fire contained saltpetre, but it amounts to nothing
more than argument, for in those receipts preserved, no salt of any kind
is mentioned. It is most likely that the leprosy of house-walls of the
Mosaic code (Leviticus XIV., 34 to 53) was saltpetre efflorescence. The
drastic treatment by way of destruction of such "unclean" walls and
houses, however, is sufficient evidence that this salt was not used. The
first certain mention of saltpetre (_sal petrae_) is in Geber. As stated
before, the date of this work is uncertain; in any event it was probably
as early as the 13th Century. He describes the making of "solvative
water" with alum and saltpetre, so there can be no doubt as to the
substance (see Note on p. 460, on nitric acid). There is also a work by
a nebulous Marcus Graecus, where the word _sal petrosum_ is used. And it
appears that Roger Bacon (died 1294) and Albertus Magnus (died 1280)
both had access to that work. Bacon uses the term _sal petrae_
frequently enough, and was the first to describe gunpowder (_De Mirabili
Potestate Artis et Naturae_ 1242). He gives no mention of the method of
making his _sal petrae_. Agricola uses throughout the Latin text the
term _halinitrum_, a word he appears to have coined himself. However, he
gives its German equivalent in the _Interpretatio_ as _salpeter_. The
only previous description of the method of making saltpetre, of which we
are aware, is that of Biringuccio (1540), who mentions the boiling of
the excrescences from walls, and also says a good deal about boiling
solutions from "nitrous" earth, which may or may not be of "plantation"
origin. He also gives this same method of refining with sulphur. In any
event, this statement by Agricola is the first clear and complete
description of the saltpetre "plantations." Saltpetre was in great
demand in the Middle Ages for the manufacture of gunpowder, and the
first record of that substance and of explosive weapons necessarily
involves the knowledge of saltpetre. However, authentic mention of such
weapons only begins early in the 14th Century. Among the earliest is an
authority to the Council of Twelve at Florence to appoint persons to
make cannon, etc., (1326), references to cannon in the stores of the
Tower of London, 1388, &c.

[10] There are three methods of manufacturing alum described by
Agricola, the first and third apparently from shales, and the second
from alum rock or "alunite." The reasons for assuming that the first
process was from shales, are the reference to the "aluminous earth" as
ore (_venae_) coming from "veins," and also the mixture of vitriol. In
this process the free sulphuric acid formed by the oxidation of pyrites
reacts upon the argillaceous material to form aluminium sulphate. The
decomposed ore is then placed in tanks and lixiviated. The solution
would contain aluminium sulphate, vitriol, and other impurities. By the
addition of urine, the aluminium sulphate would be converted into
ammonia alum. Agricola is, of course, mistaken as to the effect of the
addition, being under the belief that it separated the vitriol from the
alum; in fact, this belief was general until the latter part of the 18th
Century, when Lavoisier determined that alum must have an alkali base.
Nor is it clear from this description exactly how they were separated.
In a condensed solution allowed to cool, the alum would precipitate out
as "alum meal," and the vitriol would "float on top"--in solution. The
reference to "meal" may represent this phenomenon, and the re-boiling
referred to would be the normal method of purification by
crystallization. The "asbestos" and gypsum deposited in the caldrons
were no doubt feathery and mealy calcium sulphate. The alum produced
would, in any event, be mostly ammonia alum.

The second process is certainly the manufacture from "alum rock" or
"alunite" (the hydrous sulphate of aluminium and potassium), such as
that mined at La Tolfa in the Papal States, where the process has been
for centuries identical with that here described. The alum there
produced is the double basic potassium alum, and crystallizes into cubes
instead of octahedra, _i.e._, the Roman alum of commerce. The presence
of much ferric oxide gives the rose colour referred to by Agricola. This
account is almost identical with that of Biringuccio (II., 4), and it
appears from similarity of details that Agricola, as stated in his
preface, must have "refreshed his mind" from this description; it would
also appear from the preface that he had himself visited the locality.

The third process is essentially the same as the first, except that the
decomposition of the pyrites was hastened by roasting. The following
obscure statement of some interest occurs in Agricola's _De Natura
Fossilium_, p. 209:--"... alum is made from vitriol, for when oil is
made from the latter, alum is distilled out (_expirat_). This absorbs
the clay which is used in cementing glass, and when the operation is
complete the clay is macerated with pure water, and the alum is soon
afterward deposited in the shape of small cubes." Assuming the oil of
vitriol to be sulphuric acid and the clay "used in cementing glass" to
be kaolin, we have here the first suggestion of a method for producing
alum which came into use long after.

"Burnt alum" (_alumen coctum_).--Agricola frequently uses this
expression, and on p. 568, describes the operation, and the substance is
apparently the same as modern dehydrated alum, often referred to as
"burnt alum."

HISTORICAL NOTES.--Whether the Ancients knew of alum in the modern sense
is a most vexed question. The Greeks refer to a certain substance as
_stypteria_, and the Romans refer to this same substance as _alumen_.
There can be no question as to their knowledge and common use of
vitriol, nor that substances which they believed were entirely different
from vitriol were comprised under the above names. Beckmann (Hist. of
Inventions, Vol. I., p. 181) seems to have been the founder of the
doctrine that the ancient _alumen_ was vitriol, and scores of
authorities seem to have adopted his arguments without inquiry, until
that belief is now general. One of the strongest reasons put forward was
that alum does not occur native in appreciable quantities. Apart from
the fact that the weight of this argument has been lost by the discovery
that alum does occur in nature to some extent as an aftermath of
volcanic action, and as an efflorescence from argillaceous rocks, we see
no reason why the Ancients may not have prepared it artificially. One of
the earliest mentions of such a substance is by Herodotus (II., 180) of
a thousand talents of _stypteria_, sent by Amasis from Egypt as a
contribution to the rebuilding of the temple of Delphi. Diodorus (V., 1)
mentions the abundance which was secured from the Lipari Islands
(Stromboli, etc.), and a small quantity from the Isle of Melos.
Dioscorides (V., 82) mentions Egypt, Lipari Islands, Melos, Sardinia,
Armenia, etc., "and generally in any other places where one finds red
ochre (_rubrica_)." Pliny (XXXV., 52) gives these same localities, and
is more explicit as to how it originates--"from an earthy water which
exudes from the earth." Of these localities, the Lipari Islands
(Stromboli, etc.), and Melos are volcanic enough, and both Lipari and
Melos are now known to produce natural alum (Dana. Syst. Min., p. 95;
and Tournefort, "_Relation d'un voyage du Levant_." London, 1717,
_Lettre_ IV., Vol. 1.). Further, the hair-like alum of Dioscorides,
repeated by Pliny below, was quite conceivably fibrous _kalinite_,
native potash alum, which occurs commonly as an efflorescence. Be the
question of native alum as it may--and vitriol is not much more
common--our own view that the ancient _alumen_ was alum, is equally
based upon the artificial product. Before entering upon the subject, we
consider it desirable to set out the properties of the ancient
substance, a complete review of which is given by Pliny (XXXV., 52), he
obviously quoting also from Dioscorides, which, therefore, we do not
need to reproduce. Pliny says:--

"Not less important, or indeed dissimilar, are the uses made of
_alumen_; by which name is understood a sort of salty earth. Of this,
there are several kinds. In Cyprus there is a white _alumen_, and a
darker kind. There is not a great difference in their colour, though the
uses made of them are very dissimilar,--the white _alumen_ being
employed in a liquid state for dyeing wool bright colours, and the
dark-coloured _alumen_, on the other hand, for giving wool a sombre
tint. Gold is purified with black _alumen_. Every kind of _alumen_ is
from a _limus_ water which exudes from the earth. The collection of it
commences in winter, and it is dried by the summer sun. That portion of
it which first matures is the whitest. It is obtained in Spain, Egypt,
Armenia, Macedonia, Pontus, Africa, and the islands of Sardinia, Melos,
Lipari, and Strongyle; the most esteemed, however, is that of Egypt, the
next best from Melos. Of this last there are two kinds, the liquid
_alumen_, and the solid. Liquid _alumen_, to be good, should be of a
limpid and milky appearance; when rubbed, it should be without
roughness, and should give a little heat. This is called _phorimon_. The
mode of detecting whether it has been adulterated is by pomegranate
juice, for, if genuine, the mixture turns black. The other, or solid, is
pale and rough and turns dark with nut-galls; for which reason it is
called _paraphoron_. Liquid _alumen_ is naturally astringent,
indurative, and corrosive; used in combination with honey, it heals
ulcerations.... There is one kind of solid _alumen_, called by the
Greeks _schistos_, which splits into filaments of a whitish colour; for
which reason some prefer calling it _trichitis_ (hair like). _Alumen_ is
produced from the stone _chalcitis_, from which copper is also made,
being a sort of coagulated scum from that stone. This kind of _alumen_
is less astringent than the others, and is less useful as a check upon
bad humours of the body.... The mode of preparing it is to cook it in a
pan until it has ceased being a liquid. There is another variety of
_alumen_ also, of a less active nature, called _strongyle_. It is of two
kinds. The fungous, which easily dissolves, is utterly condemned. The
better kind is the pumice-like kind, full of small holes like a sponge,
and is in round pieces, more nearly white in colour, somewhat greasy,
free from grit, friable, and does not stain black. This last kind is
cooked by itself upon charcoal until it is reduced to pure ashes. The
best kind of all is that called _melinum_, from the Isle of Melos, as I
have said, none being more effectual as an astringent, for staining
black, and for indurating, and none becomes more dry.... Above all other
properties of _alumen_ is its remarkable astringency, whence its Greek
name.... It is injected for dysentry and employed as a gargle." The
lines omitted refer entirely to medical matters which have no bearing
here. The following paragraph (often overlooked) from Pliny (XXXV., 42)
also has an important bearing upon the subject:--"In Egypt they employ a
wonderful method of dyeing. The white cloth, after it is pressed, is
stained in various places, not with dye stuffs, but with substances
which absorb colours. These applications are not apparent on the cloth,
but when it is immersed in a caldron of hot dye it is removed the next
moment brightly coloured. The remarkable circumstance is that although
there be only one dye in the caldron yet different colours appear in the
cloth."

It is obvious from Pliny's description above, and also from the making
of vitriol (see Note 11, p. 572), that this substance was obtained from
liquor resulting from natural or artificial lixiviation of rocks--in the
case of vitriols undoubtedly the result of decomposition of pyritiferous
rocks (such as _chalcitis_). Such liquors are bound to contain aluminum
sulphate if there is any earth or clay about, and whether they contained
alum would be a question of an alkali being present. If no alkali were
present in this liquor, vitriol would crystallize out first, and
subsequent condensation would yield aluminum sulphate. If alkali were
present, the alum would crystallize out either before or with the
vitriol. Pliny's remark, "that portion of it which first matures is
whitest", agrees well enough with this hypothesis. No one will doubt
that some of the properties mentioned above belong peculiarly to
vitriol, but equally convincing are properties and uses that belong to
alum alone. The strongly astringent taste, white colour, and injection
for dysentry, are more peculiar to alum than to vitriol. But above all
other properties is that displayed in dyeing, for certainly if we read
this last quotation from Pliny in conjunction with the statement that
white _alumen_ produces bright colours and the dark kind, sombre
colours, we have the exact reactions of alum and vitriol when used as
mordants. Therefore, our view is that the ancient salt of this character
was a more or less impure mixture ranging from alum to vitriol--"the
whiter the better." Further, considering the ancient knowledge of soda
(_nitrum_), and the habit of mixing it into almost everything, it does
not require much flight of imagination to conceive its admixture to the
"water," and the absolute production of alum.

Whatever may have been the confusion between alum and vitriol among the
Ancients, it appears that by the time of the works attributed to Geber
(12th or 13th Century), the difference was well known. His work
(_Investigationes perfectiones_, IV.) refers to _alumen glaciale_ and
_alumen jameni_ as distinguished from vitriol, and gives characteristic
reactions which can leave no doubt as to the distinction. We may remark
here that the repeated statement apparently arising from Meyer (History
of Chemistry, p. 51) that Geber used the term _alum de rocca_ is untrue,
this term not appearing in the early Latin translations. During the 15th
Century alum did come to be known in Europe as _alum de rocca_. Various
attempts have been made to explain the origin of this term, ranging from
the Italian root, a "rock," to the town of Rocca in Syria, where alum
was supposed to have been produced. In any event, the supply for a long
period prior to the middle of the 15th Century came from Turkey, and the
origin of the methods of manufacture described by Agricola, and used
down to the present day, must have come from the Orient.

In the early part of the 15th Century, a large trade in alum was done
between Italy and Asia Minor, and eventually various Italians
established themselves near Constantinople and Smyrna for its
manufacture (Dudae, _Historia Byzantina Venetia_, 1729, p. 71). The alum
was secured by burning the rock, and lixiviation. With the capture of
Constantinople by the Turks (1453), great feeling grew up in Italy over
the necessity of buying this requisite for their dyeing establishments
from the infidel, and considerable exertion was made to find other
sources of supply. Some minor works were attempted, but nothing much
eventuated until the appearance of one John de Castro. From the
Commentaries of Pope Pius II. (1614, p. 185), it appears that this
Italian had been engaged in dyeing cloth in Constantinople, and thus
became aware of the methods of making alum. Driven out of that city
through its capture by the Turks, he returned to Italy and obtained an
office under the Apostolic Chamber. While in this occupation he
discovered a rock at Tolfa which appeared to him identical with that
used at Constantinople in alum manufacture. After experimental work, he
sought the aid of the Pope, which he obtained after much vicissitude.
Experts were sent, who after examination "shed tears of joy, they
kneeling down three times, worshipped God and praised His kindness in
conferring such a gift on their age." Castro was rewarded, and the great
papal monopoly was gradually built upon this discovery. The industry
firmly established at Tolfa exists to the present day, and is the source
of the Roman alum of commerce. The Pope maintained this monopoly
strenuously, by fair means and by excommunication, gradually advancing
the price until the consumers had greater complaint than against the
Turks. The history of the disputes arising over the papal alum monopoly
would alone fill a volume.

By the middle of the 15th Century alum was being made in Spain, Holland,
and Germany, and later in England. In her efforts to encourage home
industries and escape the tribute to the Pope, Elizabeth (see Note on p.
283) invited over "certain foreign chymistes and mineral masters" and
gave them special grants to induce them to "settle in these realmes."
Among them was Cornelius Devoz, to whom was granted the privilege of
"mining and digging in our Realm of England for allom and copperas."
What Devoz accomplished is not recorded, but the first alum manufacture
on a considerable scale seems to have been in Yorkshire, by one Thomas
Chaloner (about 1608), who was supposed to have seduced workmen from the
Pope's alum works at Tolfa, for which he was duly cursed with all the
weight of the Pope and Church. (Pennant, Tour of Scotland, 1786).

[11] The term for vitriol used by the Roman authors, followed by
Agricola, is _atramentum sutorium_, literally shoemaker's blacking, the
term no doubt arising from its ancient (and modern) use for blackening
leather. The Greek term was _chalcanthon_. The term "vitriol" seems
first to appear in Albertus Magnus (_De Mineralibus_, _Liber_ V.), who
died in 1280, where he uses the expression "_atramentum viride a
quibusdam vitreolum vocatur_." Agricola (_De Nat. Foss._, p. 213)
states, "In recent years the name _vitriolum_ has been given to it." The
first adequate description of vitriol is by Dioscorides (V., 76), as
follows:--"Vitriol (_chalcanthon_) is of one genus, and is a solidified
liquid, but it has three different species. One is formed from the
liquids which trickle down drop by drop and congeal in certain mines;
therefore those who work in the Cyprian mines call it _stalactis_.
Petesius calls this kind _pinarion_. The second kind is that which
collects in certain caverns; afterward it is poured into trenches, where
it congeals, whence it derives its name _pectos_. The third kind is
called _hephthon_ and is mostly made in Spain; it has a beautiful colour
but is weak. The manner of preparing it is as follows: dissolving it in
water, they boil it, and then they transfer it to cisterns and leave it
to settle. After a certain number of days it congeals and separates into
many small pieces, having the form of dice, which stick together like
grapes. The most valued is blue, heavy, dense, and translucent." Pliny
(XXXIV., 32) says:--"By the name which they have given to it, the Greeks
indicate the similar nature of copper and _atramentum sutorium_, for
they call it _chalcanthon_. There is no substance of an equally
miraculous nature. It is made in Spain from wells of this kind of water.
This water is boiled with an equal quantity of pure water, and is then
poured into wooden tanks (fish ponds). Across these tanks there are
fixed beams, to which hang cords stretched by little stones. Upon these
cords adheres the _limus_ (Agricola's 'juice') in drops of a vitreous
appearance, somewhat resembling a bunch of grapes. After removal, it is
dried for thirty days. It is of a blue colour, and of a brilliant
lustre, and is very like glass. Its solution is the blacking used for
colouring leather. _Chalcanthon_ is made in many other ways: its kind of
earth is sometimes dug from ditches, from the sides of which exude
drops, which solidify by the winter frosts into icicles, called
_stalagmia_, and there is none more pure. When its colour is nearly
white, with a slight tinge of violet, it is called _leukoion_. It is
also made in rock basins, the rain water collecting the _limus_ into
them, where it becomes hardened. It is also made in the same way as salt
by the intense heat of the sun. Hence it is that some distinguish two
kinds, the mineral and the artificial; the latter being paler than the
former and as much inferior to it in quality as it is in colour."

While Pliny gives prominence to blue vitriol, his solution for colouring
leather must have been the iron sulphate. There can be no doubt from the
above, however, that both iron and copper sulphates were known to the
Ancients. From the methods for making vitriol given here in _De Re
Metallica_, it is evident that only the iron sulphate would be produced,
for the introduction of iron strips into the vats would effectually
precipitate any copper. It is our belief that generally throughout this
work, the iron sulphate is meant by the term _atramentum sutorium_. In
_De Natura Fossilium_ (p. 213-15) Agricola gives three varieties of
_atramentum sutorium_,--_viride_, _caeruleum_, and _candidum_, _i.e._,
green, blue, and white. Thus the first mention of white vitriol (zinc
sulphate) appears to be due to him, and he states further (p. 213): "A
white sort is found, especially at Goslar, in the shape of icicles,
transparent like crystals." And on p. 215: "Since I have explained the
nature of vitriol and its relatives, which are obtained from cupriferous
pyrites, I will next speak of an acrid solidified juice which commonly
comes from _cadmia_. It is found at Annaberg in the tunnel driven to the
Saint Otto mine; it is hard and white, and so acrid that it kills mice,
crickets, and every kind of animal. However, that feathery substance
which oozes out from the mountain rocks and the thick substance found
hanging in tunnels and caves from which saltpetre is made, while
frequently acrid, does not come from _cadmia_." Dana (Syst. of Min., p.
939) identifies this as _Goslarite_--native zinc sulphate. It does not
appear, however, that artificial zinc vitriol was made in Agricola's
time. Schlueter (_Huette-Werken_, Braunschweig 1738, p. 597) states it to
have been made for the first time at Rammelsberg about 1570.

It is desirable here to enquire into the nature of the substances given
by all of the old mineralogists under the Latinized Greek terms
_chalcitis_, _misy_, _sory_, and _melanteria_. The first mention of
these minerals is in Dioscorides, who (V., 75-77) says: "The best
_chalcitis_ is like copper. It is friable, not stony, and is intersected
by long brilliant veins.... _Misy_ is obtained from Cyprus; it should
have the appearance of gold, be hard, and when pulverised it should have
the colour of gold and sparkle like stars. It has the same properties as
_chalcitis_.... The best is from Egypt.... One kind of _melanteria_
congeals like salt in the entries to copper mines. The other kind is
earthy and appears on the surface of the aforesaid mines. It is found in
the mines of Cilicia and other regions. The best has the colour of
sulphur, is smooth, pure, homogenous, and upon contact with water
immediately becomes black.... Those who consider _sory_ to be the same
as _melanteria_, err greatly. _Sory_ is a species of its own, though it
is not dissimilar. The smell of _sory_ is oppressive and provokes
nausea. It is found in Egypt and in other regions, as Libya, Spain, and
Cyprus. The best is from Egypt, and when broken is black, porous,
greasy, and astringent." Pliny (XXXIV., 29-31) says:--"That is called
_chalcitis_ from which, as well as itself copper (?) is extracted by
heat. It differs from _cadmia_ in that this is obtained from rocks near
the surface, while that is taken from rocks below the surface. Also
_chalcitis_ is immediately friable, being naturally so soft as to appear
like compressed wool. There is also this other distinction; _chalcitis_
contains three other substances, copper, _misy_, and _sory_. Of each of
these we shall speak in their appropriate places. It contains elongated
copper veins. The most approved kind is of the colour of honey; it is
streaked with fine sinuous veins and is friable and not stony. It is
considered most valuable when fresh.... The _sory_ of Egypt is the most
esteemed, being much superior to that of Cyprus, Spain, and Africa;
although some prefer the _sory_ from Cyprus for affections of the eyes.
But from whatever nation it comes, the best is that which has the
strongest odour, and which, when ground up, becomes greasy, black, and
spongy. It is a substance so unpleasant to the stomach that some persons
are nauseated by its smell. Some say that _misy_ is made by the burning
of stones in trenches, its fine yellow powder being mixed with the ashes
of pine-wood. The truth is, as I said above, that though obtained from
the stone, it is already made and in solid masses, which require force
to detach them. The best comes from the works of Cyprus, its
characteristics being that when broken it sparkles like gold, and when
ground it presents a sandy appearance, but on the contrary, if heated,
it is similar to _chalcitis_. _Misy_ is used in refining gold...."

Agricola's views on the subject appear in _De Natura Fossilium_. He says
(p. 212):--"The cupriferous pyrites (_pyrites aerosus_) called
_chalcitis_ is the mother and cause of _sory_--which is likewise known
as mine _vitriol_ (_atramentum metallicum_)--and _melanteria_. These in
turn yield vitriol and such related things. This may be seen especially
at Goslar, where the nodular lumps of dark grey colour are called
vitriol stone (_lapis atramenti_). In the centre of them is found
greyish pyrites, almost dissolved, the size of a walnut. It is enclosed
on all sides, sometimes by _sory_, sometimes by _melanteria_. From them
start little veinlets of greenish vitriol which spread all over it,
presenting somewhat the appearance of hairs extending in all directions
and cohering together.... There are five species of this solidified
juice, _melanteria_, _sory_, _chalcitis_, _misy_, and vitriol. Sometimes
many are found in one place, sometimes all of them, for one originates
from the other. From pyrites, which is, as one might say, the root of
all these juices, originates the above-mentioned _sory_ and
_melanteria_. From _sory_, _chalcitis_, and _melanteria_ originate the
various kinds of vitriol.... _Sory_, _melanteria_, _chalcitis_, and
_misy_ are always native; vitriol alone is either native or artificial.
From them vitriol effloresces white, and sometimes green or blue. _Misy_
effloresces not only from _sory_, _melanteria_, and _chalcitis_, but
also from all the vitriols, artificial as well as natural.... _Sory_ and
_melanteria_ differ somewhat from the others, but they are of the same
colours, grey and black; but _chalcitis_ is red and copper-coloured;
_misy_ is yellow or gold-coloured. All these native varieties have the
odour of lightning (brimstone), but _sory_ is the most powerful. The
feathery vitriol is soft and fine and hair-like, and _melanteria_ has
the appearance of wool and it has a similarity to salt; all these are
rare and light; _sory_, _chalcitis_, and _misy_ have the following
relations. _Sory_ because of its density has the hardness of stone,
although its texture is very coarse. _Misy_ has a very fine texture.
_Chalcitis_ is between the two; because of its roughness and strong
odour it differs from _melanteria_, although they do not differ in
colour. The vitriols, whether natural or artificial, are hard and dense
... as regarding shape, _sory_, _chalcitis_, _misy_, and _melanteria_
are nodular, but _sory_ is occasionally porous, which is peculiar to it.
_Misy_ when it effloresces in no great quantity from the others is like
a kind of pollen, otherwise it is nodular. _Melanteria_ sometimes
resembles wool, sometimes salt."

The sum and substance, therefore, appears to be that _misy_ is a
yellowish material, possibly ochre, and _sory_ a blackish stone, both
impregnated with vitriol. _Chalcitis_ is a partially decomposed pyrites;
and _melanteria_ is no doubt native vitriol. From this last term comes
the modern _melanterite_, native hydrous ferrous sulphate. Dana (System
of Mineralogy, p. 964) considers _misy_ to be in part _copiapite_--basic
ferric sulphate--but any such part would not come under Agricola's
objection to it as a source of vitriol. The disabilities of this and
_chalcitis_ may, however, be due to their copper content.

[12] Agricola (_De Nat. Fos._, 221) says:--"There is a species of
artificial sulphur made from sulphur and iron hammer-scales, melted
together and poured into moulds. This, because it heals scabs of horses,
is generally called _caballinum_." It is difficult to believe such a
combination was other than iron sulphide, but it is equally difficult to
understand how it was serviceable for this purpose.

[13] Inasmuch as pyrites is discussed in the next paragraph, the
material of the first distillation appears to be native sulphur. Until
the receiving pots became heated above the melting point of the sulphur,
the product would be "flowers of sulphur," and not the wax-like product.
The equipment described for pyrites in the next paragraph would be
obviously useful only for coarse material.

But little can be said on the history of sulphur; it is mentioned often
enough in the Bible and also by Homer (Od. XXII., 481). The Greeks
apparently knew how to refine it, although neither Dioscorides nor Pliny
specifically describes such an operation. Agricola says (_De Nat. Fos._,
220): "Sulphur is of two kinds; the mineral, which the Latins call
_vivum_, and the Greeks _apyron_, which means 'not exposed to the fire'
(_ignem non expertum_) as rightly interpreted by Celsius; and the
artificial, called by the Greeks _pepyromenon_, that is, 'exposed to the
fire.'" In Book X., the expression _sulfur ignem non expertum_
frequently appears, no doubt in Agricola's mind for native sulphur,
although it is quite possible that the Greek distinction was between
"flowers" of sulphur and the "wax-like" variety.

[14] The substances referred to under the names _bitumen_, _asphalt_,
_maltha_, _naphtha_, _petroleum_, _rock-oil_, etc., have been known and
used from most ancient times, and much of our modern nomenclature is of
actual Greek and Roman ancestry. These peoples distinguished three
related substances,--the Greek _asphaltos_ and Roman _bitumen_ for the
hard material,--Greek _pissasphaltos_ and Roman _maltha_ for the
viscous, pitchy variety--and occasionally the Greek _naphtha_ and Roman
_naphtha_ for petroleum proper, although it is often enough referred to
as liquid _bitumen_ or liquid _asphaltos_. The term _petroleum_
apparently first appears in Agricola's _De Natura Fossilium_ (p. 222),
where he says the "oil of bitumen ... now called _petroleum_." Bitumen
was used by the Egyptians for embalming from pre-historic times, _i.e._,
prior to 5000 B.C., the term "mummy" arising from the Persian word for
bitumen, _mumiai_. It is mentioned in the tribute from Babylonia to
Thotmes III., who lived about 1500 B.C. (Wilkinson, Ancient Egyptians
I., p. 397). The Egyptians, however, did not need to go further afield
than the Sinai Peninsula for abundant supplies. Bitumen is often cited
as the real meaning of the "slime" mentioned in Genesis (XI., 3; XIV.,
10), and used in building the Tower of Babel. There is no particular
reason for this assumption, except the general association of Babel,
Babylon, and Bitumen. However, the Hebrew word _sift_ for pitch or
bitumen does occur as the cement used for Moses's bulrush cradle (Exodus
II., 3), and Moses is generally accounted about 1300 B.C. Other attempts
to connect Biblical reference to petroleum and bitumen revolve around
Job XXIX., 6, Deut. XXXII., 13, Maccabees II., I, 18, Matthew V., 13,
but all require an unnecessary strain on the imagination.

The plentiful occurrence of bitumen throughout Asia Minor, and
particularly in the Valley of the Euphrates and in Persia, is the
subject of innumerable references by writers from Herodotus (484-424
B.C.) down to the author of the company prospectus of recent months.
Herodotus (I., 179) and Diodorus Siculus (I) state that the walls of
Babylon were mortared with bitumen--a fact partially corroborated by
modern investigation. The following statement by Herodotus (VI., 119) is
probably the source from which Pliny drew the information which Agricola
quotes above. In referring to a well at Ardericca, a place about 40
miles from ancient Susa, in Persia, Herodotus says:--"For from the well
they get bitumen, salt, and oil, procuring it in the way that I will now
describe: they draw with a swipe, and instead of a bucket they make use
of the half of a wine-skin; with this the man dips and, after drawing,
pours the liquid into a reservoir, wherefrom it passes into another, and
there takes three different shapes. The salt and bitumen forthwith
collect and harden, while the oil is drawn off into casks. It is called
by the Persians _rhadinace_, is black, and has an unpleasant smell."
(Rawlinson's Trans. III., p. 409). The statement from Pliny (XXXI., 39)
here referred to by Agricola, reads:--"It (salt) is made from water of
wells poured into salt-pans. At Babylon the first condensed is a
bituminous liquid like oil which is burned in lamps. When this is taken
off, salt is found beneath. In Cappadocia also the water from both wells
and springs is poured into salt-pans." When petroleum began to be used
as an illuminant it is impossible to say. A passage in Aristotle's _De
Mirabilibus_ (127) is often quoted, but in reality it refers only to a
burning spring, a phenomenon noted by many writers, but from which to
its practical use is not a great step. The first really definite
statement as to the use of petroleum as an illuminant is Strabo's
quotation (XVI., 1, 15) from Posidonius: "Asphaltus is found in great
abundance in Babylonia. Eratosthenes describes it as follows:--The
liquid _asphaltus_, which is called _naphtha_, is found in Susa; the dry
kind, which can be made solid, in Babylonia. There is a spring of it
near the Euphrates.... Others say that the liquid kind is also found in
Babylonia.... The liquid kind, called _naphtha_, is of a singular
nature. When it is brought near the fire, the fire catches it....
Posidonius says that there are springs of _naphtha_ in Babylonia, some
of which produce white, others black _naphtha_; the first of these, I
mean white _naphtha_, which attracts flame, is liquid sulphur; the
second or black _naphtha_ is liquid _asphaltus_, and is burnt in lamps
instead of oil." (Hamilton's Translation, Vol. III., p. 151).
Eratosthenes lived about 200 B.C., and Posidonius about 100 years later.
Dioscorides (I., 83), after discussing the usual sources of bitumen
says: "It is found in a liquid state in Agrigentum in Sicily, flowing on
streams; they use it for lights in lanterns in place of oil. Those who
call the Sicilian kind oil are under a delusion, for it is agreed that
it is a kind of liquid bitumen." Pliny adds nothing much new to the
above quotations, except in regard to these same springs (XXXV., 51)
that "The inhabitants collect it on the panicles of reeds, to which it
quickly adheres and they use it for burning in lamps instead of oil."
Agricola (_De Natura Fossilium_, Book IV.) classifies petroleum, coal,
jet, and obsidian, camphor, and amber as varieties of bitumen, and
devotes much space to the refutation of the claims that the last two are
of vegetable origin.

[15] Agricola (_De Natura Fossilium_, p. 215) in discussing substances
which originate from copper, gives among them green _chrysocolla_ (as
distinguished from borax, etc., see Note 8 above), and says: "Native
_chrysocolla_ originates in veins and veinlets, and is found mostly by
itself like sand, or adhering to metallic substances, and when scraped
off from this appears similar to its own sand. Occasionally it is so
thin that very little can be scraped off. Or else it occurs in waters
which, as I have said, wash these minerals, and afterward it settles as
a powder. At Neusohl in the Carpathians, green water flowing from an
ancient tunnel wears away this _chrysocolla_ with it. The water is
collected in thirty large reservoirs, where it deposits the
_chrysocolla_ as a sediment, which they collect every year and
sell,"--as a pigment. This description of its occurrence would apply
equally well to modern _chrysocolla_ or to malachite. The solution from
copper ores would deposit some sort of green incrustation, of carbonates
mostly.

[16] The statement in Pliny (XXXVI., 66) to which Agricola refers is as
follows: "Then as ingenuity was not content with the mixing of _nitrum_,
they began the addition of _lapis magnes_, because of the belief that it
attracts liquefied glass as well as iron. In a similar manner many kinds
of brilliant stones began to be added to the melting, and then shells
and fossil sand. Authors tell us that the glass of India is made of
broken crystal, and in consequence nothing can compare with it. Light
and dry wood is used for fusing, _cyprium_ (copper?) and _nitrum_ being
added, particularly _nitrum_ from Ophir etc."

A great deal of discussion has arisen over this passage, in connection
with what this _lapis magnes_ really was. Pliny (XXXVI., 25) describes
the lodestone under this term, but also says: "There (in Ethiopia) also
is _haematites magnes_, a stone of blood colour, which shows a red
colour if crushed, or of saffron. The _haematites_ has not the same
property of attracting iron as _magnes_." Relying upon this sentence for
an exception to the ordinary sort of _magnes_, and upon the impossible
chemical reaction involved, most commentators have endeavoured to show
that lodestone was not the substance meant by Pliny, but manganese, and
thus they find here the first knowledge of this mineral. There can be
little doubt that Pliny assumed it to be the lodestone, and Agricola
also. Whether the latter had any independent knowledge on this point in
glass-making or was merely quoting Pliny--which seems probable--we do
not know. In any event, Biringuccio, whose work preceded _De Re
Metallica_ by fifteen years, does definitely mention manganese in this
connection. He dismisses this statement of Pliny with the remark (p.
37-38): "The Ancients wrote about lodestones, as Pliny states, and they
mixed it together with _nitrum_ in their first efforts to make glass."
The following passage from this author (p. 36-37), however, is not only
of interest in this connection, but also as possibly being the first
specific mention of manganese under its own name. Moreover, it has been
generally overlooked in the many discussions of the subject. "Of a
similar nature (to _zaffir_) is also another mineral called _manganese_,
which is found, besides in Germany, at the mountain of Viterbo in
Tuscany ... it is the colour of _ferrigno scuro_ (iron slag?). In
melting it one cannot obtain any metal ... but it gives a very fine
colour to glass, so that the glass workers use it in their pigments to
secure an azure colour.... It also has such a property that when put
into melted glass it cleanses it and makes it white, even if it were
green or yellow. In a hot fire it goes off in a vapour like lead, and
turns into ashes."

To enter competently into the discussion of the early history of
glass-making would employ more space than can be given, and would lead
but to a sterile end. It is certain that the art was pre-Grecian, and
that the Egyptians were possessed of some knowledge of making and
blowing it in the XI Dynasty (according to Petrie 3,500 B.C.), the wall
painting at Beni Hassen, which represents glass-blowing, being
attributed to that period. The remains of a glass factory at Tel el
Amarna are believed to be of the XVIII Dynasty. (Petrie, 1,500 B.C.).
The art reached a very high state of development among the Greeks and
Romans. No discussion of this subject omits Pliny's well-known story
(XXXVI, 65), which we also add: "The tradition is that a merchant ship
laden with _nitrum_ being moored at this place, the merchants were
preparing their meal on the beach, and not having stones to prop up
their pots, they used lumps of _nitrum_ from the ship, which fused and
mixed with the sands of the shore, and there flowed streams of a new
translucent liquid, and thus was the origin of glass."




APPENDIX A.


AGRICOLA'S WORKS.

Georgius Agricola was not only the author of works on Mining and allied
subjects, usually associated with his name, but he also interested
himself to some extent in political and religious subjects. For
convenience in discussion we may, therefore, divide his writings on the
broad lines of (1) works on mining, geology, mineralogy, and allied
subjects; (2) works on other subjects, medical, religious, critical,
political, and historical. In respect especially to the first division,
and partially with regard to the others, we find three principal cases:
(_a_) Works which can be authenticated in European libraries to-day;
(_b_) references to editions of these in bibliographies, catalogues,
etc., which we have been unable to authenticate; and (_c_) references to
works either unpublished or lost. The following are the short titles of
all of the published works which we have been able to find on the
subjects allied to mining, arranged according to their present
importance:--_De Re Metallica_, first edition, 1556; _De Natura
Fossilium_, first edition, 1546; _De Ortu et Causis Subterraneorum_,
first edition, 1546; _Bermannus_, first edition, 1530; _Rerum
Metallicarum Interpretatio_, first edition, 1546; _De Mensuris et
Ponderibus_, first edition, 1533; _De Precio Metallorum et Monetis_,
first edition, 1550; _De Veteribus et Novis Metallis_, first edition,
1546; _De Natura eorum quae Effluunt ex Terra_, first edition, 1546; _De
Animantibus Subterraneis_, first edition, 1549.

Of the "lost" or unpublished works, on which there is some evidence, the
following are the most important:--_De Metallicis et Machinis_, _De Ortu
Metallorum Defensio ad Jacobum Scheckium_, _De Jure et Legibus
Metallicis_, _De Varia Temperie sive Constitutione Aeris_, _De Terrae
Motu_, and _Commentariorum, Libri VI_.

The known published works upon other subjects are as follows:--Latin
Grammar, first edition, 1520; Two Religious Tracts, first edition, 1522;
_Galen_ (Joint Revision of Greek Text), first edition, 1525; _De Bello
adversus Turcam_, first edition, 1528; _De Peste_, first edition, 1554.

The lost or partially completed works on subjects unrelated to mining,
of which some trace has been found, are:--_De Medicatis Fontibus_, _De
Putredine solidas partes_, etc., _Castigationes in Hippocratem_,
_Typographia Mysnae et Toringiae_, _De Traditionibus Apostolicis_,
_Oratio de rebus gestis Ernesti et Alberti_, _Ducum Saxoniae_.


REVIEW OF PRINCIPAL WORKS.

Before proceeding with the bibliographical detail, we consider it
desirable to review briefly the most important of the author's works on
subjects related to mining.

_De Natura Fossilium._ This is the most important work of Agricola,
excepting _De Re Metallica_. It has always been printed in combination
with other works, and first appeared at Basel, 1546. This edition was
considerably revised by the author, the amended edition being that of
1558, which we have used in giving references. The work comprises ten
"books" of a total of 217 folio pages. It is the first attempt at
systematic mineralogy, the minerals[1] being classified into (1)
"earths" (clay, ochre, etc.), (2) "stones properly so-called" (gems,
semi-precious and unusual stones, as distinguished from rocks), (3)
"solidified juices" (salt, vitriol, alum, etc.), (4) metals, and (5)
"compounds" (homogeneous "mixtures" of simple substances, thus forming
such minerals as galena, pyrite, etc.). In this classification Agricola
endeavoured to find some fundamental basis, and therefore adopted
solubility, fusibility, odour, taste, etc., but any true classification
without the atomic theory was, of course, impossible. However, he makes
a very creditable performance out of their properties and obvious
characteristics. All of the external characteristics which we use to-day
in discrimination, such as colour, hardness, lustre, etc., are
enumerated, the origin of these being attributed to the proportions of
the Peripatetic elements and their binary properties. Dana, in his great
work[2], among some fourscore minerals which he identifies as having
been described by Agricola and his predecessors, accredits a score to
Agricola himself. It is our belief, however, that although in a few
cases Agricola has been wrongly credited, there are still more of which
priority in description might be assigned to him. While a greater number
than fourscore of so-called species are given by Agricola and his
predecessors, many of these are, in our modern system, but varieties;
for instance, some eight or ten of the ancient species consist of one
form or another of silica.

Book I. is devoted to mineral characteristics--colour, brilliance,
taste, shape, hardness, etc., and to the classification of minerals;
Book II., "earths"--clay, Lemnian earth, chalk, ochre, etc.; Book III.,
"solidified juices"--salt, _nitrum_ (soda and potash), saltpetre, alum,
vitriol, chrysocolla, _caeruleum_ (part azurite), orpiment, realgar, and
sulphur; Book IV., camphor, bitumen, coal, bituminous shales, amber;
Book V., lodestone, bloodstone, gypsum, talc, asbestos, mica, calamine,
various fossils, geodes, emery, touchstones, pumice, fluorspar, and
quartz; Book VI., gems and precious stones; Book VII., "rocks"--marble,
serpentine, onyx, alabaster, limestone, etc.; Book VIII., metals--gold,
silver, quicksilver, copper, lead, tin, antimony, bismuth, iron, and
alloys, such as electrum, brass, etc.; Book IX., various furnace
operations, such as making brass, gilding, tinning, and products such as
slags, furnace accretions, _pompholyx_ (zinc oxide), copper flowers,
litharge, hearth-lead, verdigris, white-lead, red-lead, etc.; Book X.,
"compounds," embracing the description of a number of recognisable
silver, copper, lead, quicksilver, iron, tin, antimony, and zinc
minerals, many of which we set out more fully in Note 8, page 108.

_De Ortu et Causis Subterraneorum._ This work also has always been
published in company with others. The first edition was printed at
Basel, 1546; the second at Basel, 1558, which, being the edition
revised and added to by the author, has been used by us for reference.
There are five "books," and in the main they contain Agricola's
philosophical views on geologic phenomena. The largest portion of the
actual text is occupied with refutations of the ancient philosophers,
the alchemists, and the astrologers; and these portions, while they
exhibit his ability in observation and in dialectics, make but dull
reading. Those sections of the book which contain his own views,
however, are of the utmost importance in the history of science, and we
reproduce extensively the material relating to ore deposits in the
footnotes on pages 43 to 52. Briefly, Book I. is devoted to discussion
of the origin and distribution of ground waters and juices. The latter
part of this book and a portion of Book II. are devoted to the origin of
subterranean heat, which he assumes is in the main due to burning
bitumen--a genus which with him embraced coal--and also, in a minor
degree, to friction of internal winds and to burning sulphur. The
remainder of Book II. is mainly devoted to the discussion of
subterranean "air", "vapour", and "exhalations", and he conceives that
volcanic eruptions and earthquakes are due to their agency, and in these
hypotheses he comes fairly close to the modern theory of eruptions from
explosions of steam. "Vapour arises when the internal heat of the earth
or some hidden fire burns earth which is moistened with vapour. When
heat or subterranean fire meets with a great force of vapour which cold
has contracted and encompassed in every direction, then the vapour,
finding no outlet, tries to break through whatever is nearest to it, in
order to give place to the insistent and urgent cold. Heat and cold
cannot abide together in one place, but expel and drive each other out
of it by turns".

As he was, we believe, the first to recognise the fundamental agencies
of mountain sculpture, we consider it is of sufficient interest to
warrant a reproduction of his views on this subject: "Hills and
mountains are produced by two forces, one of which is the power of
water, and the other the strength of the wind. There are three forces
which loosen and demolish the mountains, for in this case, to the power
of the water and the strength of the wind we must add the fire in the
interior of the earth. Now we can plainly see that a great abundance of
water produces mountains, for the torrents first of all wash out the
soft earth, next carry away the harder earth, and then roll down the
rocks, and thus in a few years they excavate the plains or slopes to a
considerable depth; this may be noticed in mountainous regions even by
unskilled observers. By such excavation to a great depth through many
ages, there rises an immense eminence on each side. When an eminence has
thus arisen, the earth rolls down, loosened by constant rain and split
away by frost, and the rocks, unless they are exceedingly firm, since
their seams are similarly softened by the damp, roll down into the
excavations below. This continues until the steep eminence is changed
into a slope. Each side of the excavation is said to be a mountain, just
as the bottom is called a valley. Moreover, streams, and to a far
greater extent rivers, effect the same results by their rushing and
washing; for this reason they are frequently seen flowing either between
very high mountains which they have created, or close by the shore
which borders them.... Nor did the hollow places which now contain the
seas all formerly exist, nor yet the mountains which check and break
their advance, but in many parts there was a level plain, until the
force of winds let loose upon it a tumultuous sea and a scathing tide.
By a similar process the impact of water entirely overthrows and
flattens out hills and mountains. But these changes of local conditions,
numerous and important as they are, are not noticed by the common people
to be taking place at the very moment when they are happening, because,
through their antiquity, the time, place, and manner in which they began
is far prior to human memory. The wind produces hills and mountains in
two ways: either when set loose and free from bonds, it violently moves
and agitates the sand; or else when, after having been driven into the
hidden recesses of the earth by cold, as into a prison, it struggles
with a great effort to burst out. For hills and mountains are created in
hot countries, whether they are situated by the sea coasts or in
districts remote from the sea, by the force of winds; these no longer
held in check by the valleys, but set free, heap up the sand and dust,
which they gather from all sides, to one spot, and a mass arises and
grows together. If time and space allow, it grows together and hardens,
but if it be not allowed (and in truth this is more often the case), the
same force again scatters the sand far and wide.... Then, on the other
hand, an earthquake either rends and tears away part of a mountain, or
engulfs and devours the whole mountain in some fearful chasm. In this
way it is recorded the Cybotus was destroyed, and it is believed that
within the memory of man an island under the rule of Denmark
disappeared. Historians tell us that Taygetus suffered a loss in this
way, and that Therasia was swallowed up with the island of Thera. Thus
it is clear that water and the powerful winds produce mountains, and
also scatter and destroy them. Fire only consumes them, and does not
produce at all, for part of the mountains--usually the inner part--takes
fire."

The major portion of Book III. is devoted to the origin of ore channels,
which we reproduce at some length on page 47. In the latter part of Book
III., and in Books IV. and V., he discusses the principal divisions of
the mineral kingdom given in _De Natura Fossilium_, and the origin of
their characteristics. It involves a large amount of what now appears
fruitless tilting at the Peripatetics and the alchemists; but
nevertheless, embracing, as Agricola did, the fundamental Aristotelian
elements, he must needs find in these same elements and their
subordinate binary combinations cause for every variation in external
character.

_Bermannus._ This, Agricola's first work in relation to mining, was
apparently first published at Basel, 1530. The work is in the form of a
dialogue between "Bermannus," who is described as a miner, mineralogist,
and "a student of mathematics and poetry," and "Nicolaus Ancon" and
"Johannes Naevius," both scholars and physicians. Ancon is supposed to
be of philosophical turn of mind and a student of Moorish literature,
Naevius to be particularly learned in the writings of Dioscorides,
Pliny, Galen, etc. "Bermannus" was probably an adaptation by Agricola
of the name of his friend Lorenz Berman, a prominent miner. The book is
in the main devoted to a correlation of the minerals mentioned by the
Ancients with those found in the Saxon mines. This phase is interesting
as indicating the natural trend of Agricola's scholastic mind when he
first comes into contact with the sciences to which he devoted himself.
The book opens with a letter of commendation from Erasmus, of Rotterdam,
and with the usual dedication and preface by the author. The three
conversationalists are supposed to take walks among the mines and to
discuss, incidentally, matters which come to their attention; therefore
the book has no systematic or logical arrangement. There are occasional
statements bearing on the history, management, titles, and methods used
in the mines, and on mining lore generally. The mineralogical part,
while of importance from the point of view of giving the first
description of several minerals, is immensely improved upon in _De
Natura Fossilium_, published 15 years later. It is of interest to find
here the first appearance of the names of many minerals which we have
since adopted from the German into our own nomenclature. Of importance
is the first description of bismuth, although, as pointed out on page
433, the metal had been mentioned before. In the revised collection of
collateral works published in 1558, the author makes many important
changes and adds some new material, but some of the later editions were
made from the unrevised older texts.

_Rerum Metallicarum Interpretatio._ This list of German equivalents for
Latin mineralogical terms was prepared by Agricola himself, and first
appears in the 1546 collection of _De Ortu et Causis_, _De Natura
Fossilium_, etc., being repeated in all subsequent publications of these
works. It consists of some 500 Latin mineralogical and metallurgical
terms, many of which are of Agricola's own coinage. It is of great help
in translation and of great value in the study of mineralogic
nomenclature.

_De Mensuris et Ponderibus._ This work is devoted to a discussion of the
Greek and Roman weights and measures, with some correlation to those
used in Saxony. It is a careful work still much referred to by students
of these subjects. The first edition was published at Paris in 1533, and
in the 1550 edition at Basel appears, for the first time, _De Precio
Metallorum et Monetis_.

_De Veteribus et Novis Metallis._ This short work comprises 31 folio
pages, and first appears in the 1546 collection of collateral works. It
consists mainly of historical and geographical references to the
occurrence of metals and mines, culled from the Greek and Latin
classics, together with some information as to the history of the mines
in Central Europe. The latter is the only original material, and
unfortunately is not very extensive. We have incorporated some of this
information in the footnotes.

_De Animantibus Subterraneis._ This short work was first printed in
Basel, 1549, and consists of one chapter of 23 folio pages. Practically
the whole is devoted to the discussion of various animals who at least a
portion of their time live underground, such as hibernating,
cave-dwelling, and burrowing animals, together with cave-dwelling birds,
lizards, crocodiles, serpents, etc. There are only a few lines of remote
geological interest as to migration of animals imposed by geologic
phenomena, such as earthquakes, floods, etc. This book also discloses an
occasional vein of credulity not to be expected from the author's other
works, in that he apparently believes Aristotle's story of the flies
which were born and lived only in the smelting furnace; and further, the
last paragraph in the book is devoted to underground gnomes. This we
reproduce in the footnote on page 217.

_De Natura eorum quae Effluunt ex Terra._ This work of four books,
comprising 83 folio pages, first appears in the 1546 collection. As the
title indicates, the discussion is upon the substances which flow from
the earth, such as water, bitumen, gases, etc. Altogether it is of
microscopic value and wholly uninteresting. The major part refers to
colour, taste, temperature, medicinal uses of water, descriptions of
rivers, lakes, swamps, and aqueducts.


BIBLIOGRAPHICAL NOTES.

For the following we have mainly to thank Miss Kathleen Schlesinger, who
has been employed many months in following up every clue, and although
the results display very considerable literary activity on the part of
the author, they do not by any means indicate Miss Schlesinger's
labours. Agricola's works were many of them published at various times
in combination, and therefore to set out the title and the publication
of each work separately would involve much repetition of titles, and we
consequently give the titles of the various volumes arranged according
to dates. For instance, _De Natura Fossilium_, _De Ortu et Causis_, _De
Veteribus et Novis Metallis_, _De Natura eorum quae Effluunt ex Terra_,
and _Interpretatio_ have always been published together, and the Latin
and Italian editions of these works always include _Bermannus_ as well.
Moreover, the Latin _De Re Metallica_ of 1657 includes all of these
works.

We mark with an asterisk the titles to editions which we have been able
to authenticate by various means from actual books. Those unmarked are
editions which we are satisfied do exist, but the titles of which are
possibly incomplete, as they are taken from library catalogues, etc.
Other editions to which we find reference and of which we are not
certain are noted separately in the discussion later on.[3]

*1530 (8vo):

     _Georgii Agricolae Medici, Bermannus sive de re Metallica._

     (Froben's mark).

     _Basileae in aedibus Frobenianis Anno. MDXXX._

     Bound with this edition is (p. 131-135), at least occasionally,
     _Rerum metallicarum appellationes juxta vernaculam Germanorum
     linguam, autori Plateano_.

     _Basileae in officina Frobeniana_, Anno. MDXXX.

*1533 (8vo):

     _Georgii Agricolae Medici libri quinque de Mensuris et
     Ponderibus: in quibus plaeraque a Budaeo et Portio parum
     animadversa diligenter excutiuntur. Opus nunc primum in lucem
     aeditum._

     (Wechelus's Mark).

     _Parisiis. Excudebat Christianus Wechelus, in vico Iacobaeo,
     sub scuto Basileiensi, Anno MDXXXIII._

     261 pages and index of 5 pages.

*1533 (4to):

     _Georgii Agricolae Medici Libri quinque. De Mensuris et
     Ponderibus: In quibus pleraque a Budaeo et Portio parum
     animadversa diligenter excutiuntur._

     (Froben's Mark).

     _Basileae ex Officina Frobeniana Anno MDXXXIII. Cum gratia et
     privilegio Caesareo ad sex annos._


1534 (4to):

     _Georgii Agricolae. Epistola ad Plateanum, cui sunt adiecta
     aliquot loca castigata in libris de mensuris et ponderibus
     nuper editis._

     Froben, Basel, 1534.

*1535 (8vo):

     _Georgii Agricolae Medici libri V. de Mensuris et Ponderibus:
     in quibus pleraque a Budaeo et Portio parum animadversa
     diligenter excutiuntur._

     (Printer's Mark).

     At the end of Index: _Venitues per Juan Anto. de Nicolinis de
     Sabio, sumptu vero et requisitione Dni Melchionis Sessae. Anno.
     Dni MDXXXV. Mense Julii._ 116 folios.

     On back of title page is given: _Liber primus de mensuris
     Romanis, Secundus de mensuris Graecis, Tertius de rerum quas
     metimur pondere, Quartus de ponderibus Romanis, Quintus de
     ponderibus Graecis._

*1541 (8vo):

     _Georgii Agricolae Medici Bermannus sive de re metallica._

     _Parisiis. Apud Hieronymum Gormontiu. In Vico Jacobeo sub
     signotrium coronarum._ 1541.

*1546 (8vo):

     _Georgii Agricolae medici Bermannus, sive de metallica ab
     accurata autoris recognitione et emendatione nunc primum editus
     cum nomenclatura rerum metallicarum. Eorum Lipsiae In officina
     Valentini Papae Anno. MDXLVI._

*1546 (folio):

     _Georgii Agricolae De ortu et causis subterraneorum Lib. V. De
     natura eorum quae effluunt ex terra Lib. IIII. De natura
     fossilium Lib. X. De veteribus et novis metallis, Lib. II.
     Bermannus sive De re Metallica dialogus. Interpretatio
     Germanica vocum rei metallicae addito Indice faecundissimo._

     _Apud Hieron Frobenium et Nicolaum Episcopium Basileae, MDXLVI.
     Cum privilegio Imp. Maiestatis ad quinquennium._

*1549 (8vo):

     _Georgii Agricolae de animantibus subterraneis Liber._

     Froben, Basel, MDXLIX.

*1550 (8vo):

     _Di Georgio Agricola De la generatione de le cose, che sotto la
     terra sono, e de le cause de' loro effetti e natura, Lib. V. De
     La Natura di quelle cose, che de la terra scorrono Lib. IIII.
     De La Natura de le cose Fossili, e che sotto la terra si Cavano
     Lib. X. De Le Minere antiche e moderne Lib. II. Il Bermanno, o
     de le cose Metallice Dialogo, Recato tutto hora dal Latino in
     Buona Lingua volgare._

     (Vignette of Sybilla surrounded by the words)--_Qv Al Piv Fermo
     E Il Mio Foglio E Il Mio Presaggio._

     _Col Privilegio del Sommo Pontefice Papa Giulio III. Et del
     Illustriss. Senato Veneto per anni. XX._

     (Colophon). _In Vinegia per Michele Tramezzino, MDL._

*1550 (folio):

     _Georgii Agricolae. De Mensuris et ponderibus Rom. atque Graec.
     lib. V. De externis mensuris et ponderibus Lib. II. Ad ea quae
     Andreas Alciatus denuo disputavit De Mensuris et Ponderibus
     brevis defensio Lib. I. De Mensuris quibus intervalla metimur
     Lib. I. De restituendis ponderibus atque mensuris. Lib. I. De
     precio metallorum et monetis. Lib. III._

     _Basileae._ Froben. MDL. _Cum privilegio Imp. Maiestatis ad
     quinquennium._[4]

*1556 (folio):

     _Georgii Agricolae De Re Metallica Libri XII. quibus Officia,
     Instrumenta, Machinae, ac omnia denique ad Metallicam
     spectantia, non modo luculentissime describuntur, sed et per
     effigies, suis locis insertas, adjunctis Latinis, Germanicisque
     appellationibus ita ob oculos ponuntur, ut clarius tradi non
     possint Eiusdem De Animantibus Subterraneis Liber, ab Autore
     recognitus: cum Indicibus diversis, quicquid in opere tractatum
     est, pulchre demonstrantibus._

     (Froben's Mark).

     _Basileae MDLVI. Cum Privilegio Imperatoris in annos V. et
     Galliarum Regis ad Sexennium._

     Folio 538 pages and preface, glossary and index amounting to 86
     pages. This is the first edition of _De Re Metallica_. We
     reproduce this title-page on page XIX.

*1557 (folio):

     _Vom Bergkwerck xii Buecher darinn alle Empter, Instrument,
     Gezeuge, unnd Alles zu disem Handel gehoerig, mitt schoenen
     figuren vorbildet, und Klaerlich beschriben seindt erstlich in
     Lateinischer Sprach durch den Hochgelerten und weittberuempten
     Herrn Georgium Agricolam, Doctorn und. Buergermeistern der
     Churfuerstlichen statt Kempnitz, jezundt aber verteuescht durch
     den Achtparen. unnd Hochgelerten Herrn Philippum Bechium,
     Philosophen, Artzer und in der Loblichen Universitet zu Basel
     Professorn._

     _Gedruckt zu Basel durch Jeronymus Froben Und Niclausen
     Bischoff im 1557 Jar mitt Keiserlicher Freyheit._

*1558 (folio):

     _Georgii Agricolae De ortu et causis subterraneorum Lib. V. De
     natura eorum quae effluunt ex terra Lib. IV. De natura
     fossilium Lib. X. De veteribus et novis metallis Lib. II.
     Bermannus, sive De Re Metallica Dialogus Liber. Interpretatio
     Germanica vocum rei metallicae, addito duplici Indice, altero
     rerum, altero locorum Omnia ab ipso authore, cum haud
     poenitenda accessione, recens recognita._

     _Froben, et Episcop. Basileae MDLVIII. Cum Imp. Maiestatis
     renovato privilegio ad quinquennium._

     270 pages and index. As the title states, this is a revised
     edition by the author, and as the changes are very considerable
     it should be the one used. The Italian translation and the 1612
     Wittenberg edition, mentioned below, are taken from the 1546
     edition, and are, therefore, very imperfect.

*1561 (folio):

     Second edition of _De Re Metallica_ including _De Animantibus
     Subterraneis_, with same title as the first edition except the
     addition, after the body of the title, of the words _Atque
     omnibus nunc iterum ad archetypum diligenter restitutis et
     castigatis_ and the year MDLXI. 502 pages and 72 pages of
     glossary and index.

*1563 (folio):

     _Opera di Giorgio Agricola de L'arte de Metalli Partita in XII.
     libri, ne quali si descrivano tutte le sorti, e qualita de gli
     uffizii, de gli strumenti, delle macchine, e di tutte l'altre
     cose attenenti a cotal arte, non pure con parole chiare ma
     eziandio si mettano a luoghi loro le figure di dette cose,
     ritratte al naturale, con l'aggiunta de nomi di quelle, cotanto
     chiari, e spediti, che meglio non si puo desiderare, o havere._

     _Aggiugnesi il libro del medesimo autore, che tratta de gl'
     Animali di sottoterra da lui stesso corretto et riveduto.
     Tradotti in lingua Toscana da M. Michelangelo Florio
     Fiorentino._

     _Con l'Indice di tutte le cose piu notabili alla fine_
     (Froben's mark) _in Basilea per Hieronimo Frobenio et Nicolao
     Episcopio, MDLXIII._

     542 pages with 6 pages of index.

*1580 (folio):

     _Bergwerck Buch: Darinn nicht Allain alle Empte Instrument
     Gezeug und alles so zu diesem Handel gehoerig mit figuren
     vorgebildet und klaerlich beschriben, etc. Durch den
     Hochgelehrten ... Herrn Georgium Agricolam der Artzney Doctorn
     und Burgermeister der Churfuerstlichen Statt Kemnitz erstlich
     mit grossem fleyss muehe und arbeit in Latein beschriben und in
     zwoelff Buecher abgetheilt: Nachmals aber durch den Achtbarn und
     auch Hochgelehrten Philippum Bechium Philosophen Artzt und in
     der Loeblichen Universitet zu Basel Professorn mit sonderm
     fleyss Teutscher Nation zu gut verteutscht und an Tag geben.
     Allen Berckherrn Gewercken Berckmeistern Geschwornen
     Schichtmeistern Steigern Berckheuwern Waeschern und Schmeltzern
     nicht allein nuetzlich und dienstlich sondern auch zu wissem
     hochnotwendig._

     _Mit Roemischer Keys. May Freyheit nicht nachzutrucken._

     _Getruckt in der Keyserlichen Reichsstatt, Franckfort am Mayn,
     etc. Im Jahr MDLXXX._

*1612 (12mo):

     _Georgii Agricolae De ortu et causis subterraneorum Lib. V. De
     natura eorum quae effluunt ex terra, Lib. IV. De natura
     fossilium Lib. X. De veteribus et novis metallis Lib. II.
     Bermannus, sive de re metallica Dialogus. Interpretatio
     Germanica vocum rei metallicae._

     _Addito Indice faecundissimo, Plurimos jam annos a Germanis, et
     externarum quoque nationum doctissimis viris, valde desiderati
     et expetiti._

     _Nunc vero in rei metallicae studiosorum gratiam recensiti, in
     certa capita distributi, capitum argumentis, et nonnullis
     scholiis marginalibus illustrati a Johanne Sigfrido Philos: et
     Medicinae Doctore et in illustri Julia Professore ordinario._

     _Accesserunt De metallicis rebus et nominibus observationes
     variae et eruditae, ex schedis Georgii Fabricii, quibus ea
     potissimum explicantur, quae Georgius Agricola praeteriit_.

     _Wittebergae Sumptibus Zachariae Schuereri Bibliopolae Typis
     Andreae Ruedingeri, 1612._

     There are 970 pages in the work of Agricola proper, the notes
     of Fabricius comprising a further 44 pages, and the index 112
     pages.

*1614 (8vo):

     _Georgii Agricolae De Animantibus Subterraneis Liber Hactenus a
     multis desideratus, nunc vero in gratiam studiosorum seorsim
     editus, in certa capita divisus, capitum argumentis et
     nonnullis marginalibus exornatus a Johanne Sigfrido, Phil. &
     Med. Doctore_, etc.

     _Wittebergae. Typis Meisnerianis: Impensis Zachariae. Schureri
     Bibliop. Anno. MDCXIV._

*1621 (folio):

     _Georgii Agricolae Kempnicensis Medici ac Philosophi Clariss.
     De Re Metallica Libri XII Quibus Officia, Instrumenta,
     Machinae, ac omnia denique ad metallicam spectantia, non modo
     Luculentissime describuntur; sed et per effigies, suis locis
     insertas adjunctis Latinis, Germanicisque; appellationibus, ita
     ob oculos ponuntur, ut clarius tradi non possint._

     _Ejusdem De Animantibus Subterraneis Liber, ab Autore
     recognitus cum Indicibus diversis quicquid in Opere tractatum
     est, pulchre demonstrantibus._

     (Vignette of man at assay furnace).

     _Basileae Helvet. Sumptibus itemque typis chalcographicis
     Ludovici Regis Anno MDCXXI._

     502 pages and 58 pages glossary and indices.

*1621 (folio):

     _Bergwerck Buch Darinnen nicht allein alle Empter Instrument
     Gezeug und alles so zu disem Handel gehoerig mit Figuren
     vorgebildet und klaerlich beschrieben:.... Durch den
     Hochgelehrten und weitberuehmten Herrn Georgium Agricolam, der
     Artzney Doctorn und Burgermeister der Churfuerstlichen Statt
     Kemnitz Erstlich mit grossem fleiss muehe und arbeit in Latein
     beschrieben und in zwoelff Buecher abgetheilt: Nachmals aber
     durch den Achtbarn und auch Hochgelehrten Philippum Bechium.
     Philosophen, Artzt, und in der loblichen Universitet zu Basel
     Professorn mit sonderm fleiss Teutscher Nation zu gut
     verteutscht und an Tag geben und nun zum andern mal getruckt._

     _Allen Bergherrn Gewercken Bergmeistern Geschwornen
     Schichtmeistern Steigern Berghaewern Waeschern unnd Schmeltzern
     nicht allein nutzlich und dienstlich sondern auch zu wissen
     hochnohtwendig._

     (Vignette of man at assay furnace).

     _Getruckt zu Basel inverlegung Ludwig Koenigs Im Jahr, MDCXXI._

     491 pages 5 pages glossary--no index.

*1657 (folio):

     _Georgii Agricolae Kempnicensis Medici ac Philosophi Clariss.
     De Re Metallica Libri XII. Quibus Officia, instrumenta,
     machinae, ac omnia denique ad metallicam spectantia, non modo
     luculentissime describuntur: sed et per effigies, suis locis
     insertas, adjunctis Latinis, Germanicisque appellationibus, ita
     ob oculos ponuntur, ut clarius tradi non possint. Quibus
     accesserunt hac ultima editione, Tractatus ejusdem argumenti,
     ab eodem conscripti, sequentes._

     _De Animantibus Subterraneis Lib. I., De Ortu et Causis
     Subterraneorum Lib. V., De Natura eorum quae effluunt ex Terra
     Lib. IV., De Natura Fossilium Lib. X., De Veteribus et Novis
     Metallis Lib. II., Bermannus sive de Re Metallica, Dialogus
     Lib. I._

     _Cum Indicibus diversis, quicquid in Opere tractatum est,
     pulchre demonstrantibus._

     (Vignette of assayer and furnace).

     _Basileae Sumptibus et Typis Emanuelis Koenig. Anno MDCLVII._

     Folio, 708 pages and 90 pages of glossary and indices. This is
     a very serviceable edition of all of Agricola's important
     works, and so far as we have noticed there are but few
     typographical errors.

*1778 (8vo):

     _Gespraech vom Bergwesen, wegen seiner Fuertrefflich keit aus dem
     Lateinischen in das Deutsche uebersetzet, mit nuetzl. Anmerkungen
     erlaeutert. u. mit einem ganz neuen Zusatze von Zlueglicher
     Anstellung des Bergbaues u. von der Zugutemachung der Erze auf
     den Huettenwerken versehen von Johann Gottlieb Stoer._

     _Rotenburg a. d. Fulda, Hermstaedt 1778._ 180 pages.

*1806 (8vo):

     _Georg Agricola's Bermannus eine Einleitung in die
     metallurgischen Schriften desselben, uebersetzt und mit
     Exkursionen herausgegeben von Friedrich August Schmid.
     Haushalts- und Befahrungs-Protokollist im Churf. vereinigten
     Bergamte zu St. Annaberg._

     _Freyberg 1806. Bey Craz und Gerlach._

*1807-12 (8vo).

     _Georg Agrikola's Mineralogische Schriften uebersetzt und mit
     erlaeuternden Anmerkungen. Begleitet von Ernst Lehmann
     Bergamts-Assessor, Berg- Gegen- und Receszschreiber in Dem
     Koenigl. Saechs. Bergamte Voigtsberg der jenaischen Societaet fuer
     die gesammte Mineralogie Ehrenmitgliede._

     _Freyberg, 1807-12. Bey Craz und Gerlach._

     This German translation consists of four parts: the first being
     _De Ortu et Causis_, the second _De Natura eorum quae effluunt
     ex terra_, and the third in two volumes _De Natura Fossilium_,
     the fourth _De Veteribus et Novis Metallis_; with glossary and
     index to the four parts.

We give the following notes on other possible prints, as a great many
references to the above works occur in various quarters, of date other
than the above. Unless otherwise convinced it is our belief that most of
these refer to the prints given above, and are due to error in giving
titles or dates. It is always possible that such prints do exist and
have escaped our search.

_De Re Metallica._ Leupold, Richter, Schmid, van der Linden, Mercklinus
and Eloy give an 8vo edition of _De Re Metallica_ without illustrations,
Schweinfurt, 1607. We have found no trace of this print. Leupold, van
der Linden, Richter, Schmid and Eloy mention an 8vo edition, Wittenberg,
1614. It is our belief that this refers to the 1612 Wittenberg edition
of the selected works, which contains a somewhat similar title referring
in reality to _Bermannus_, which was and is still continually confused
with _De Re Metallica_. Ferguson mentions a German edition, Schweinfurt,
8vo, 1687. We can find no trace of this; it may refer to the 1607
Schweinfurt edition mentioned above.

_De Natura Fossilium._ Leupold and Gatter refer to a folio edition of
1550. This was probably an error for either the 1546 or the 1558
editions. Watt refers to an edition of 1561 combined with _De Medicatis
Fontibus_. We find no trace of such edition, nor even that the latter
work was ever actually printed. He also refers to an edition of 1614 and
one of 1621, this probably being an error for the 1612 edition of the
subsidiary works and the _De Re Metallica_ of 1621. Leupold also refers
to an edition of 1622, this probably being an error for 1612.

_De Ortu et Causis._ Albinus, Hofmann, Jacobi, Schmid, Richter, and
Reuss mention an edition of 1544. This we believe to be an error in
giving the date of the dedication instead of that of the publication
(1546). Albinus and Ferguson give an edition of 1555, which date is, we
believe, an error for 1558. Ferguson gives an edition of the Italian
translation as 1559; we believe this should be 1550. Draud gives an
edition of 1621; probably this should be 1612.

_Bermannus._ Albinus, Schmid, Reuss, Richter, and Weinart give the first
edition as 1528. We have been unable to learn of any actual copy of that
date, and it is our belief that the date is taken from the dedication
instead of from the publication, and should be 1530. Leupold, Schmid,
and Reuss give an edition by Froben in 1549; we have been unable to
confirm this. Leupold also gives an edition of 1550 (folio), and Joecher
gives an edition of Geneva 1561 (folio); we have also been unable to
find this, and believe the latter to be a confusion with the _De Re
Metallica_ of 1561, as it is unlikely that _Bermannus_ would be
published by itself in folio. The catalogue of the library at Siena
(Vol. III., p. 78) gives _Il Bermanno, Vinegia_, 1550, 8vo. We have
found no trace of this edition elsewhere.

_De Mensuris et Ponderibus._ Albinus and Schmid mention an edition of
1539, and one of 1550. The Biographie Universelle, Paris, gives one of
1553, and Leupold one of 1714, all of which we have been unable to find.
An epitome of this work was published at various times, sometimes in
connection with editions of Vitruvius; so far as we are aware on the
following dates, 1552, 1585, 1586, 1829. There also appear extracts in
relation to liquid measures in works entitled _Vocabula rei numariae
ponderum et mensurarum_, etc. Paul Eber and Caspar Peucer, _Lipsiae_,
1549, and in same Wittenberg, 1552.

_De Veteribus et Novis Metallis._ Watt gives an edition, Basel, 1530,
and Paris, 1541; we believe this is incorrect and refers to _Bermannus_.
Reuss mentions a folio print of Basel, 1550. We consider this very
unlikely.

_De Natura eorum quae Effluunt ex Terra._ Albinus, Hofmann, Schmid,
Jacobi, Richter, Reuss, and Weinart give an edition of 1545. We believe
this is again the dedication instead of the publication date (1546).

_De Animantibus Subterraneis._ Van der Linden gives an edition at
Schweinfurt, 8vo, 1607. Although we have been unable to find a copy,
this slightly confirms the possibility of an octavo edition of _De Re
Metallica_ of this date, as they were usually published together.
Leupold gives assurance that he handled an octavo edition of Wittenberg,
1612, _cum notis Johann Sigfridi_. We think he confused this with
_Bermannus sive de re metallica_ of that date and place. Schmid,
Richter, and Draud all refer to an edition similarly annotated, Leipzig,
1613, 8vo. We have no trace of it otherwise.


UNPUBLISHED WORKS ON SUBJECTS RELATED TO MINING.

Agricola apparently projected a complete series of works covering the
whole range of subjects relating to minerals: geology, mineralogy,
mining, metallurgy, history of metals, their uses, laws, etc. In a
letter[5] from Fabricius to Meurer (March, 1553), the former states that
Agricola intended writing about 30 books (chapters) in addition to those
already published, and to the twelve books _De Re Metallica_ which he
was about to publish. Apparently a number of these works were either
unfinished or unpublished at Agricola's death, for his friend George
Fabricius seems to have made some effort to secure their publication,
but did not succeed, through lack of sympathy on the part of Agricola's
family. Hofmann[6] states on this matter: "His intentions were
frustrated mainly through the lack of support with which he was met by
the heirs of the Mineralogist. These, as he complains to a Councillor of
the Electorate, Christopher von Carlovitz, in 1556, and to Paul Eber in
another letter, adopted a grudging and ungracious tone with regard to
his proposal to collect all Agricola's works left behind, and they only
consented to communicate to him as much as they were obliged by express
command of the Prince. At the Prince's command they showed him a little,
but he supposed that there was much more that they had suppressed or not
preserved. The attempt to purchase some of the works--the Elector had
given Fabricius money for the purpose (30 nummos unciales)--proved
unavailing, owing to the disagreeableness of Agricola's heirs. It is no
doubt due to these regrettable circumstances that all the works of the
industrious scholar did not come down to us." The "disagreeableness" was
probably due to the refusal of the Protestant townsfolk to allow the
burial of Agricola in the Cathedral at Chemnitz. So far as we know the
following are the unpublished or lost works.

_De Jure et Legibus Metallicis._ This work on mining law is mentioned at
the end of Book IV. of _De Re Metallica_, and it is referred to by
others apparently from that source. We have been unable to find any
evidence that it was ever published.

_De Varia temperie sive Constitutione Aeris._ In a letter[7] to Johann
Naevius, Agricola refers to having a work in hand of this title.

_De Metallis et Machinis._ Hofmann[8] states that a work of this title
by Agricola, dated Basel 1543, was sold to someone in America by a
Frankfort-on-Main bookseller in 1896. This is apparently the only
reference to it that we know of, and it is possibly a confusion of
titles or a "separate" of some chapters from _De Re Metallica_.

_De Ortu Metallorum Defensio ad Jacobum Scheckium._ Referred to by
Fabricius in a letter[9] to Meurer. If published was probably only a
tract.

_De Terrae Motu._ In a letter[10] from Agricola to Meurer (Jan. 1, 1544)
is some reference which might indicate that he was formulating a work on
earthquakes under this title, or perhaps may be only incidental to the
portions of _De Ortu et Causis_ dealing with this subject.

_Commentariorum in quibus utriusque linguae scriptorum locos difficiles
de rebus subterraneis explicat, Libri VI._ Agricola apparently partially
completed a work under some such title as this, which was to embrace
chapters entitled _De Methodis_ and _De Demonstratione_. The main object
seems to have been a commentary on the terms and passages in the
classics relating to mining, mineralogy, etc. It is mentioned in the
Preface of _De Veteribus et Novis Metallis_, and in a letter[11] from
one of Froben's firm to Agricola in 1548, where it is suggested that
Agricola should defer sending his new commentaries until the following
spring. The work is mentioned by Albinus[12], and in a letter from Georg
Fabricius to Meurer on the 2nd Jan. 1548,[13] in another from G.
Fabricius, to his brother Andreas on Oct. 28, 1555,[14] and in a third
from Fabricius to Melanchthon on December 8th, 1555[15], in which regret
is expressed that the work was not completed by Agricola.


WRITINGS NOT RELATED TO MINING, INCLUDING LOST OR UNPUBLISHED WORKS.

_Latin Grammar._ This was probably the first of Agricola's publications,
the full title to which is _Georgii Agricolae Glaucii Libellus de prima
ac simplici institutione grammatica. Excusum Lipsiae in Officina
Melchioris Lottheri. Anno MDXX._ (4to), 24 folios.[16] There is some
reason to believe that Agricola also published a Greek grammar, for
there is a letter[17] from Agricola dated March 18th, 1522, in which
Henicus Camitianus is requested to send a copy to Stephan Roth.

_Theological Tracts._ There are preserved in the Zwickau Rathsschul
Library[18] copies by Stephan Roth of two tracts, the one entitled,
_Deum non esse auctorem Peccati_, the other, _Religioso patri Petri
Fontano, sacre theologie Doctori eximio Georgius Agricola salutem dicit
in Christo_. The former was written from Leipzig in 1522, and the
latter, although not dated, is assigned to the same period. Both are
printed in _Zwei theologische Abhandlungen des Georg Agricola_, an
article by Otto Clemen, _Neuen Archiv fur Saechsische Geschichte_, etc.,
Dresden, 1900. There is some reason (from a letter of Fabricius to
Melanchthon, Dec. 8th, 1555) to believe that Agricola had completed a
work on the unwritten traditions concerning the Church. There is no
further trace of it.

_Galen._ Agricola appears to have been joint author with Andreas
Asulanus and J. B. Opizo of a revision of this well-known Greek work. It
was published at Venice in 1525, under the title of _Galeni Librorum_,
etc., etc. Agricola's name is mentioned in a prefatory letter to Opizo
by Asulanus.

_De Bello adversus Turcam._ This political tract, directed against the
Turks, was written in Latin and first printed by Froben, Basel, 1528. It
was translated into German apparently by Agricola's friend Laurenz
Berman, and published under the title _Oration Anrede Und Vormanunge ...
widder den Tuercken_ by Frederich Peypus, Nuremberg, in 1531 (8vo), and
either in 1530 or 1531 by Wolfgang Stoeckel, Dresden, 4to. It was again
printed in Latin by Froben, Basel, 1538, 4to; by H. Grosius, Leipzig,
1594, 8vo; it was included among other works published on the same
subject by Nicholas Reusnerus, Leipzig, 1595; by Michael Lantzenberger,
Frankfurt-am-Main, 1597, 4to. Further, there is reference by Watt to an
edition at Eisleben, 1603, of which we have no confirmation. There is
another work on the subject, or a revision by the author mentioned by
Albinus[19] as having been, after Agricola's death, sent to Froben by
George Fabricius to be printed; nothing further appears in this matter
however.

_De Peste._ This work on the Plague appears to have been first printed
by Froben, Basel, 1554, 8vo. The work was republished at Schweinfurt,
1607, and at Augsburg in 1614, under various editors. It would appear
from Albinus[20] that the work was revised by Agricola and in Froben's
hands for publication after the author's death.

_De Medicatis Fontibus._ This work is referred to by Agricola himself in
_De Natura Eorum_,[21] in the prefatory letter in _De Veteribus et Novis
Metallis_; and Albinus[22] quotes a letter of Agricola to Sebastian
Munster on the subject. Albinus states (_Bergchronik_, p. 193) that to
his knowledge it had not yet been published. Conrad Gesner, in his work
_Excerptorum et observationum de Thermis_, which is reprinted in _De
Balneis_, Venice, 1553, after Agricola's _De Natura Eorum_, states[23]
concerning Agricola _in libris quos de medicatis fontibus instituerit
copiosus se dicturum pollicetur_. Watt mentions it as having been
published in 1549, 1561, 1614, and 1621. He, however, apparently
confuses it with _De Natura Eorum_. We are unable to state whether it
was ever printed or not. A note of inquiry to the principal libraries in
Germany gave a negative result.

_De Putredine solidas partes humani corporis corrumpente._ This work,
according to Albinus was received by Fabricius a year after Agricola's
death, but whether it was published or not is uncertain.[24]

_Castigationes in Hippocratem et Galenum._ This work is referred to by
Agricola in the preface of _Bermannus_, and Albinus[25] mentions several
letters referring to the preparation of the work. There is no evidence
of publication.

_Typographia Mysnae et Toringiae._ It seems from Agricola's letter[26]
to Munster that Agricola prepared some sort of a work on the history of
Saxony and of the Royal Family thereof at the command of the Elector
and sent it to him when finished, but it was never published as written
by Agricola. Albinus, Hofmann, and Struve give some details of letters
in reference to it. Fabricius in a letter[27] dated Nov. 11, 1536 asks
Meurer to send Agricola some material for it; in a letter from Fabricius
to Meurer dated Oct. 30, 1554, it appears that the Elector had granted
Agricola 200 thalers to assist in the work. After Agricola's death the
material seems to have been handed over to Fabricius, who made use of it
(as he states in the preface) in preparing the work he was commissioned
by the Elector to write, the title of which was, _Originum
illustrissimae stirpis Saxonicae Libri_, and was published in Leipzig,
1597. It includes on page 880 a fragment of a work entitled _Oratio de
rebus Gestis Ernesti et Alberti Ducum Saxoniae_, by Agricola.


WORKS WRONGLY ATTRIBUTED TO GEORGIUS AGRICOLA.

The following works have been at one time or another wrongly attributed
to Georgius Agricola:--

_Galerazeya sive Revelator Secretorum De Lapide Philosophorum_, Cologne,
1531 and 1534, by one Daniel Agricola, which is merely a controversial
book with a catch-title, used by Catholics for converting heretics.

_Rechter Gebrauch der Alchimey_, a book of miscellaneous receipts which
treats very slightly of transmutation.[28]

_Chronik der Stadt Freiberg_ by a Georg Agricola (died 1630), a preacher
at Freiberg.

_Dominatores Saxonici_, by the same author.

_Breviarum de Asse_ by Guillaume Bude.

_De Inventione Dialectica_ by Rudolph Agricola.


FOOTNOTES:

[1] See footnote 4, page 1.

[2] System of Mineralogy.

[3] The following are the titles of the works referred to in this
discussion:--

Petrus Albinus: _Meissnische Land und Berg Chronica In welcher ein
wollnstendige description des Landes_, etc., Dresden, 1590 (contains
part I, _Commentatorium de Mysnia_). _Newe Chronica und Beschreibung des
Landes zu Meissen_, pp. 1 to 449, besides preface and index, and Part
II. _Meissnische Bergk Chronica_, Dresden, 1590, pp. 1 to 205, besides
preface and index.

Adam Daniel Richter: _Umstaendliche ... Chronica der ... Stadt Chemnitz
nebst beygefuegten Urkunden_, 2 pts. 4to, Zittau & Leipzig, 1767.

Ben. G. Weinart: _Versuch einer Litteratur d. Saechsischen Geschichte und
Staats kunde_, Leipzig, 1885.

Friedrich August Schmid: _Georg Agrikola's Bermannus: Einleitung in die
metallurgischen Schriften desselben_, Freyberg, Craz & Gerlach. 1806,
pp. VIII., 1-260.

Franz Ambros Reuss: _Mineralogische Geographie van Boehmen_. 2 vols. 4to,
Dresden, 1793-97. (Agricola Vol. I, p. 2).

Jacob Leupold: _Prodromus Bibliothecae Metallicae_, corrected,
continued, and augmented by F. E. Brueckmann. Wolfenbuettel, 1732, s.v.
Agricola.

Christian Gottlieb Goecher: _Allgemeines Gelehrten-Lexicon_, with
continuation and supplements by Adelung, Leipzig, 1750, s.v. Agricola.

John Anton Van der Linden: _De Scriptis medicis, Libri duo_, Amsterdam,
1662, s.v. Georgius Agricola.

Nicolas Francois Joseph Eloy: _Dictionnaire Historique de la Medecine_,
Liege & Francfort (chez J. F. Bassompierre), 1755, 8vo (Agricola p. 28,
vol. I).

Georg Abraham Mercklinus: _Lindenius Renovatus de scriptis medicis
continuati ... amplificati_, etc., Amsterdam, 1686, s.v. Georgius
Agricola.

John Ferguson: _Bibliotheca Chemica_: A catalogue of the Alchemical,
Chemical, and Pharmaceutical books in the collection of the late James
Young of Kelly & Durris, Esq., L.L.D., F.R.S., F.R.S.E. Glasgow, 1906,
4to, 2 vols., s.v. Agricola.

Christoph Wilhelm Gatterer: _Allgemeines Repertorium der
mineralogischen, bergwerks und Salz werkswissenschaftlichen Literatur_,
Goettingen, 1798, vol. I.

Dr. Reinhold Hofmann: _Dr. Georg Agricola, Ein Gelehrtenleben aus dem
Zeitalter der Reformation_, 8vo, Gotha, 1905.

Georg Heinrich Jacobi: _Der Mineralog Georgius Agricola und sein
Verhaeltnis zur wissenschaft seiner Zeit_, etc., 8vo. Zwickau (1889),
(_Dissertation_--Leipzig).

Georg Draud: _Bibliotheca Classica_, Frankfurt-am-Main, 1611.

B. G. Struve: _Bibliotheca Saxonica_, 8vo, Halle, 1736.

[4] Albinus states (p. 354): _Omnes simul editi Anno. 1549, iterum 1550,
Basileae_, as though two separate editions.

[5] _G. Fabricii epistolae ad W. Meurerum et alios aequales_, by
Baumgarten-Crusius, Leipzig, 1845, p. 83.

[6] _Dr. Georg Agricola_, Gotha, 1905, pp. 60-61.

[7] Albinus, _Landchronik_, pp. 354-5.

[8] _Dr. Georg Agricola_, p. 63.

[9] _Baumgarten-Crusius_, p. 115.

[10] _Virorum Clarorum Saec. XVI. et XVII._ _Epistolae Selectae_ by
Ernst Weber, Leipzig, 1894, p. 2.

[11] Nicholas Episcopius to Georg Agricola, Sept. 17, 1548, published in
Schmid's _Bermannus_ p. 38. See also Hofmann, op. cit. pp. 62 and 140.

[12] _Meissnische Landchronik_, Dresden, 1589, p. 354.

[13] Printed in Baumgarten-Crusius, pp. 48-49, letter XLVIII.

[14] Printed in Hermann Peter's _Meissner Jahresbericht der
Fuerstenschule_, 1891, p. 24.

[15] Baumgarten-Crusius. _Georgii Fabricii Chemnicensis Epistolae_,
Leipzig, 1845, p. 139.

[16] There is a copy of this work in the Rathsschul Library at Zwickau.

[17] In the Rathsschul Library at Zwickau.

[18] Contained in Vols. XXXVII. and XL. of Stephan Roth's
_Kollectanenbaende_ Volumes of Transcripts.

[19] _Landchronik_, p. 354.

[20] Op. cit., p. 354.

[21] Book IV.

[22] Op. cit., p. 355.

[23] Page 291.

[24] See Baumgarten-Crusius, p. 114, letter from Georg Fabricius.

[25] Op. cit., p. 354.

[26] Albinus, Op. cit., p. 355.

[27] Baumgarten-Crusius, p. 2.

[28] See Ferguson, _Bibliotheca Chemica_, s.v. Daniel Agricola.




APPENDIX B.

ANCIENT AUTHORS.


We give the following brief notes on early works containing some
reference to mineralogy, mining, or metallurgy, to indicate the
literature available to Agricola and for historical notes bearing upon
the subject. References to these works in the footnotes may be most
easily consulted through the personal index.

GREEK AUTHORS.--Only a very limited Greek literature upon subjects
allied to mining or natural science survives. The whole of the material
of technical interest could be reproduced on less than twenty of these
pages. Those of most importance are: Aristotle (384-322 B.C.),
Theophrastus (371-288 B.C.), Diodorus Siculus (1st Century B.C.), Strabo
(64 B.C.-25 A.D.), and Dioscorides (1st Century A.D.).

Aristotle, apart from occasional mineralogical or metallurgical
references in _De Mirabilibus_, is mostly of interest as the author of
the Peripatetic theory of the elements and the relation of these to the
origin of stones and metals. Agricola was, to a considerable measure, a
follower of this school, and their views colour much of his writings.
We, however, discuss elsewhere[1] at what point he departed from them.
Especially in _De Ortu et Causis_ does he quote largely from Aristotle's
_Meteorologica_, _Physica_, and _De Coelo_ on these subjects. There is a
spurious work on stones attributed to Aristotle of some interest to
mineralogists. It was probably the work of some Arab early in the Middle
Ages.

Theophrastus, the principal disciple of Aristotle, appears to have
written at least two works relating to our subject--one "On Stones", and
the other on metals, mining or metallurgy, but the latter is not extant.
The work "On Stones" was first printed in Venice in 1498, and the Greek
text, together with a fair English translation by Sir John Hill, was
published in London in 1746 under the title "Theophrastus on Stones";
the translation is, however, somewhat coloured with Hill's views on
mineralogy. The work comprises 120 short paragraphs, and would, if
reproduced, cover but about four of these pages. In the first paragraphs
are the Peripatetic view of the origin of stones and minerals, and upon
the foundation of Aristotle he makes some modifications. The principal
interest in Theophrastus' work is the description of minerals; the
information given is, however, such as might be possessed by any
ordinary workman, and betrays no particular abilities for natural
philosophy. He enumerates various exterior characteristics, such as
colour, tenacity, hardness, smoothness, density, fusibility, lustre, and
transparence, and their quality of reproduction, and then proceeds to
describe various substances, but usually omits his enumerated
characteristics. Apart from the then known metals and certain "earths"
(ochre, marls, clay, etc.), it is possible to identify from his
descriptions the following rocks and minerals:--marble, pumice, onyx,
gypsum, pyrites, coal, bitumen, amber, azurite, chrysocolla, realgar,
orpiment, cinnabar, quartz in various forms, lapis lazuli, emerald,
sapphire, diamond, and ruby. Altogether there are some sixteen distinct
mineral species. He also describes the touchstone and its uses, the
making of white-lead and verdigris, and of quicksilver from cinnabar.

Diodorus Siculus was a Greek native of Sicily. His "historical library"
consisted of some 40 books, of which parts of 15 are extant. The first
print was in Latin, 1472, and in Greek in 1539; the first translation
into English was by Thomas Stocker, London, 1568, and later by G. Booth,
1700. We have relied upon Booth's translation, but with some amendments
by friends, to gain more literal statement. Diodorus, so far as relates
to our subject, gives merely the occasional note of a traveller. The
most interesting paragraphs are his quotation from Agatharchides on
Egyptian mining and upon British tin.

Strabo was also a geographer. His work consists of 17 books, and
practically all survive. We have relied upon the most excellent
translation of Hamilton and Falconer, London, 1903, the only one in
English. Mines and minerals did not escape such an acute geographer, and
the matters of greatest interest are those with relation to Spanish
mines.

Dioscorides was a Greek physician who wrote entirely from the standpoint
of materia medica, most of his work being devoted to herbs; but Book V.
is devoted to minerals and rocks, and their preparation for medicinal
purposes. The work has never been translated into English, and we have
relied upon the Latin translation of Matthioli, Venice, 1565, and notes
upon the Greek text prepared for us by Mr. C. Katopodes. In addition to
most of the substances known before, he, so far as can be identified,
adds schist, _cadmia_ (blende or calamine), _chalcitis_ (copper
sulphide), _misy_, _melanteria_, _sory_ (copper or iron sulphide
oxidation minerals). He describes the making of certain artificial
products, such as copper oxides, vitriol, litharge, _pompholyx_, and
_spodos_ (zinc and/or arsenical oxides). His principal interest for us,
however, lies in the processes set out for making his medicines.

Occasional scraps of information relating to the metals or mines in some
connection are to be found in many other Greek writers, and in
quotations by them from others which are not now extant, such as
Polybius, Posidonius, etc. The poets occasionally throw a gleam of
light on ancient metallurgy, as for instance in Homer's description of
Vulcan's foundry; while the historians, philosophers, statesmen, and
physicians, among them Herodotus, Xenophon, Demosthenes, Galen, and many
others, have left some incidental references to the metals and mining,
helpful to gleaners from a field, which has been almost exhausted by
time. Even Archimedes made pumps, and Hero surveying instruments for
mines.

ROMAN AUTHORS.--Pre-eminent among all ancient writers on these subjects
is, of course, Pliny, and in fact, except some few lines by Vitruvius,
there is practically little else in extant Roman literature of technical
interest, for the metallurgical metaphors of the poets and orators were
threadbare by this time, and do not excite so much interest as upon
their first appearance among the Greeks and Hebrews.

Pliny (Caius Plinius Secundus) was born 23 A.D., and was killed by
eruption of Vesuvius 79 A.D. His Natural History should be more properly
called an encyclopaedia, the whole comprising 37 books; but only portions
of the last four books relate to our subject, and over one-half of the
material there is upon precious stones. To give some rough idea of the
small quantity of even this, the most voluminous of ancient works upon
our subject, we have made an estimate that the portions of metallurgical
character would cover, say, three pages of this text, on mining two
pages, on building and precious stones about ten pages. Pliny and
Dioscorides were contemporaries, and while Pliny nowhere refers to the
Greek, internal evidence is most convincing, either that they drew from
the same source, or that Pliny drew from Dioscorides. We have,
therefore, throughout the text given precedence in time to the Greek
author in matters of historical interest. The works of Pliny were first
printed at Venice in 1469. They have passed dozens of editions in
various languages, and have been twice translated into English. The
first translation by Philemon Holland, London, 1601, is quite
impossible. The second translation, by Bostock and Riley, London, 1855,
was a great advance, and the notes are most valuable, but in general the
work has suffered from a freedom justifiable in the translation of
poetry, but not in science. We have relied upon the Latin edition of
Janus, Leipzig, 1870. The frequent quotations in our footnotes are
sufficient indication of the character of Pliny's work. In general it
should be remembered that he was himself but a compiler of information
from others, and, so far as our subjects are concerned, of no other
experience than most travellers. When one considers the reliability of
such authors to-day on technical subjects, respect for Pliny is much
enhanced. Further, the text is no doubt much corrupted through the
generations of transcription before it was set in type. So far as can be
identified with any assurance, Pliny adds but few distinct minerals to
those enumerated by Theophrastus and Dioscorides. For his metallurgical
and mining information we refer to the footnotes, and in general it may
be said that while those skilled in metallurgy can dimly see in his
statements many metallurgical operations, there is little that does not
require much deduction to arrive at a conclusion. On geology he offers
no new philosophical deductions of consequence; the remote connection of
building stones is practically all that can be enumerated, lest one
build some assumption of a knowledge of ore-deposits on the use of the
word "vein". One point of great interest to this work is that in his
search for Latin terms for technical purposes Agricola relied almost
wholly upon Pliny, and by some devotion to the latter we have been able
to disentangle some very puzzling matters of nomenclature in _De Re
Metallica_, of which the term _molybdaena_ may be cited as a case in
point.

Vitruvius was a Roman architect of note of the 1st Century B.C. His work
of ten books contains some very minor references to pumps and machinery,
building stones, and the preparation of pigments, the latter involving
operations from which metallurgical deductions can occasionally be
safely made. His works were apparently first printed in Rome in 1496.
There are many editions in various languages, the first English
translation being from the French in 1692. We have relied upon the
translation of Joseph Gwilt, London, 1875, with such alterations as we
have considered necessary.

MEDIAEVAL AUTHORS.--For convenience we group under this heading the
writers of interest from Roman times to the awakening of learning in the
early 16th Century. Apart from Theophilus, they are mostly alchemists;
but, nevertheless, some are of great importance in the history of
metallurgy and chemistry. Omitting a horde of lesser lights upon whom we
have given some data under the author's preface, the works principally
concerned are those ascribed to Avicenna, Theophilus, Geber, Albertus
Magnus, Roger Bacon, and Basil Valentine. Judging from the Preface to
_De Re Metallica_, and from quotations in his subsidiary works, Agricola
must have been not only familiar with a wide range of alchemistic
material, but also with a good deal of the Arabic literature, which had
been translated into Latin. The Arabs were, of course, the only race
which kept the light of science burning during the Dark Ages, and their
works were in considerable vogue at Agricola's time.

Avicenna (980-1037) was an Arabian physician of great note, a translator
of the Greek classics into Arabic, and a follower of Aristotle to the
extent of attempting to reconcile the Peripatetic elements with those of
the alchemists. He is chiefly known to the world through the works which
he compiled on medicine, mostly from the Greek and Latin authors. These
works for centuries dominated the medical world, and were used in
certain European Universities until the 17th century. A great many works
are attributed to him, and he is copiously quoted by Agricola,
principally in his _De Ortu et Causis_, apparently for the purpose of
exposure.

Theophilus was a Monk and the author of a most illuminating work,
largely upon working metal and its decoration for ecclesiastical
purposes. An excellent translation, with the Latin text, was published
by Robert Hendrie, London, 1847, under the title "An Essay upon various
Arts, in three books, by Theophilus, called also Rugerus, Priest and
Monk." Hendrie, for many sufficient reasons, places the period of
Theophilus as the latter half of the 11th century. The work is mainly
devoted to preparing pigments, making glass, and working metals, and
their conversion into ecclesiastical paraphernalia, such as mural
decoration, pictures, windows, chalices, censers, bells, organs, etc.
However, he incidentally describes the making of metallurgical furnaces,
cupellation, parting gold and silver by cementation with salt, and by
melting with sulphur, the smelting of copper, liquating lead from it,
and the refining of copper under a blast with poling.

Geber was until recent years considered to be an Arab alchemist of a
period somewhere between the 7th and 12th centuries. A mere bibliography
of the very considerable literature which exists in discussion of who,
where, and at what time the author was, would fill pages. Those who are
interested may obtain a start upon such references from Hermann Kopp's
_Beitraege zur Geschichte der Chemie_, Braunschweig, 1875, and in John
Ferguson's _Bibliotheca Chemica_, Glasgow, 1906. Berthelot, in his
_Chimie au Moyen Age_, Paris, 1893, considers the works under the name
of Geber were not in the main of Arabic origin, but composed by some
Latin scholar in the 13th century. In any event, certain works were,
under this name, printed in Latin as early as 1470-80, and have passed
innumerable editions since. They were first translated into English by
Richard Russell, London, 1678, and we have relied upon this and the
Nuremberg edition in Latin of 1541. This work, even assuming Berthelot's
view, is one of the most important in the history of chemistry and
metallurgy, and is characterised by a directness of statement unique
among alchemists. The making of the mineral acids--certainly nitric and
_aqua regia_, and perhaps hydrochloric and sulphuric--are here first
described. The author was familiar with saltpetre, sal-ammoniac, and
alkali, and with the acids he prepared many salts for the first time. He
was familiar with amalgamation, cupellation, the separation of gold and
silver by cementation with salt and by nitric acid. His views on the
primary composition of bodies dominated the alchemistic world for
centuries. He contended that all metals were composed of "spiritual"
sulphur (or arsenic, which he seems to consider a special form of
sulphur) and quicksilver, varying proportions and qualities yielding
different metals. The more the quicksilver, the more "perfect" the
metal.

Albertus Magnus (Albert von Bollstadt) was a Dominican Monk, afterwards
Bishop, born about 1205, and died about 1280. He was rated the most
learned man of his time, and evidence of his literary activities lies in
the complete edition of his works issued by Pierre Jammy, Lyons, 1651,
which comprises 21 folio volumes. However, there is little doubt that a
great number of works attributed to him, especially upon alchemy, are
spurious. He covered a wide range of theology, logic, alchemy, and
natural science, and of the latter the following works which concern our
subject are considered genuine:--_De Rebus Metallicis et Mineralibus_,
_De Generatione et Corruptione_, and _De Meteoris_. They are little more
than compilations and expositions of the classics muddled with the
writings of the Arabs, and in general an attempt to conciliate the
Peripatetic and Alchemistic schools. His position in the history of
science has been greatly over-estimated. However, his mineralogy is,
except for books on gems, the only writing of any consequence at all on
the subject between Pliny and Agricola, and while there are but two or
three minerals mentioned which are not to be found in the ancient
authors, this work, nevertheless, deserves some place in the history of
science, especially as some attempt at classification is made. Agricola
devotes some thousands of words to the refutation of his "errors."

Roger Bacon (1214-1294) was a Franciscan Friar, a lecturer at Oxford,
and a man of considerable scientific attainments for his time. He was
the author of a large number of mathematical, philosophical, and
alchemistic treatises. The latter are of some importance in the history
of chemistry, but have only minute bearing upon metallurgy, and this
chiefly as being one of the earliest to mention saltpetre.

Basil Valentine is the reputed author of a number of alchemistic works,
of which none appeared in print until early in the 17th century.
Internal evidence seems to indicate that the "Triumphant Chariot of
Antimony" is the only one which may possibly be authentic, and could not
have been written prior to the end of the 15th or early 16th century,
although it has been variously placed as early as 1350. To this work has
been accredited the first mention of sulphuric and hydrochloric acid,
the separation of gold and silver by the use of antimony (sulphide), the
reduction of the antimony sulphide to the metal, the extraction of
copper by the precipitation of the sulphate with iron, and the discovery
of various antimonial salts. At the time of the publication of works
ascribed to Valentine practically all these things were well known, and
had been previously described. We are, therefore, in much doubt as to
whether this author really deserves any notice in the history of
metallurgy.

EARLY 16th CENTURY WORKS.--During the 16th century, and prior to _De Re
Metallica_, there are only three works of importance from the point of
view of mining technology--the _Nuetzlich Bergbuechlin_, the
_Probierbuechlein_, and Biringuccio's _De La Pirotechnia_. There are also
some minor works by the alchemists of some interest for isolated
statements, particularly those of Paracelsus. The three works mentioned,
however, represent such a stride of advance over anything previous,
that they merit careful consideration.

_Eyn Nuetzlich Bergbuechlin._ Under this title we frequently refer to a
little booklet on veins and ores, published at the beginning of the 16th
century. The title page of our copy is as below:--

[Illustration 610 (Title page)]

This book is small 8vo, comprises 24 folios without pagination, and has
no typographical indications upon the title page, but the last line in
the book reads: _Gedruckt zu Erffurd durch Johan Loersfelt, 1527_.
Another edition in our possession, that of "Frankfurt am Meyn", 1533, by
Christian Egenolph, is entitled _Bergwerk und Probierbuechlin_, etc., and
contains, besides the above, an extract and plates from the
_Probierbuechlein_ (referred to later on), and a few recipes for assay
tests. All of these booklets, of which we find mention, comprise
instructions from Daniel, a skilled miner, to Knappius, "his mining
boy". Although the little books of this title are all anonymous, we are
convinced, largely from the statement in the Preface of _De Re
Metallica_, that one Calbus of Freiberg was the original author of this
work. Agricola says: "Two books have been written in our tongue: the one
on the assaying of mineral substances and metals, somewhat confused,
whose author is unknown; the other 'On Veins', of which Pandulfus Anglus
is also said to have written, _although the German book was written by
Calbus of Freiberg, a well-known doctor; but neither of them
accomplished the task he had begun_." He again refers to Calbus at the
end of Book III.[2] of _De Re Metallica_, and gives an almost verbatim
quotation from the _Nuetzlich Bergbuechlin_. Jacobi[3] says: "Calbus
Fribergius, so called by Agricola himself, is certainly no other than
the Freiberg doctor, Ruehlein von C(K)albe." There are also certain
internal evidences that support Agricola's statement, for the work was
evidently written in Meissen, and the statement of Agricola that the
book was unfinished is borne out by a short dialogue at the end of the
earlier editions, designed to introduce further discussion. Calbus (or
Dr. Ulrich Ruehlein von Kalbe) was a very active citizen of Freiberg,
having been a town councillor in 1509, burgomaster in 1514, a
mathematician, mining surveyor, founder of a school of liberal arts, and
in general a physician. He died in 1523.[4] The book possesses great
literary interest, as it is, so far as we are aware, undoubtedly the
first work on mining geology, and in consequence we have spent some
effort in endeavour to find the date of its first appearance. Through
the courtesy of M. Polain, who has carefully examined for us the
_Nuetzlich Bergbuechlein_ described in Marie Pellechet's _Catalogue
General des Incunables des Bibliotheques Publiques de France_,[5] we
have ascertained that it is similar as regards text and woodcuts to the
Erfurt edition, 1527. This copy in the Bibliotheque Nationale is without
typographical indications, and M. Polain considers it very possible that
it is the original edition printed at the end of the fifteenth or
beginning of the sixteenth centuries. Mr. Bennett Brough,[6] quoting
Hans von Dechen,[7] states that the first edition was printed at
Augsburg in 1505, no copy of which seems to be extant. The Librarian at
the School of Mines at Freiberg has kindly furnished us with the
following notes as to the titles of the copies in that Institution:--(1)
_Eyn Wolgeordent und Nuetzlich Bergbuechlein_, etc., Worms, 1512[8] and
1518[9] (the place and date are written in), (2) the same as ours
(1527); (3) the same, Heinrich Steyner, Augsburg, 1534; (4) the same,
1539. On comparing these various editions (to which may be added one
probably published in Nuernberg by Friedrich Peypus in 1532[10]) we find
that they fall into two very distinct groups, characterised by their
contents and by two entirely different sets of woodcuts.

Group I.

     (_a_) _Eyn Nuetzlich Bergbuechlein_ (in _Bibl. Nat._, Paris)
     before 1500 (?).

     (_b_) Ditto, Erfurt, 1527.

Group II.

     (_c_) _Wolgeordent Nuetzlich Bergbuechlein_, Worms, Peter
     Schoefern, 1512.

     (_d_) _Wolgeordent Nuetzlich Bergbuechlein_, Worms, Peter
     Schoefern, 1518.

     (_e_) _Bergbuechlin von Erkantnus der Berckwerck_, Nuernberg,
     undated, 1532 (?).

     (_f_) _Bergwerckbuch & Probirbuch_, Christian Egenolph,
     Frankfurt-am-Meyn, 1533.

     (_g_) _Wolgeordent Nuetzlich Bergbuechlein_, Augsburg, Heinrich
     Steyner, 1534.

     (_h_) _Wolgeordent Nuetzlich Bergbuechlein_, Augsburg, Heinrich
     Steyner, 1539.

There are also others of later date toward the end of the sixteenth
century.

The _Buechlein_ of Group I. terminate after the short dialogue between
Daniel and Knappius with the words: _Mitt welchen das kleinspeissig ertz
geschmeltzt soil werden_; whereas in those of Group II. these words are
followed by a short explanation of the signs used in the woodcuts, and
by directions for colouring the woodcuts, and in some cases by several
pages containing definitions of some 92 mining terms. In the editions of
Group I. the woodcut on the title page represents a miner hewing ore in
a vein and two others working a windlass. In those of Group II. the
woodcut on the title page represents one miner hewing on the surface,
another to the right carting away ore in a handcart, and two others
carrying between them a heavy timber. In our opinion Group I. represents
the older and original work of Calbus; but as we have not seen the copy
in the _Bibliotheque Nationale_, and the Augsburg edition of 1505 has
only so far been traced to Veith's catalogue,[11] the question of the
first edition cannot be considered settled at present. In any event, it
appears that the material grafted on in the second group was later, and
by various authors.

The earliest books comprise ten chapters, in which Daniel delivers about
6,000 words of instruction. The first four chapters are devoted to the
description of veins and the origin of the metals, of the remaining six
chapters one each to silver, gold, tin, copper, iron, lead, and
quicksilver. Among the mining terms are explained the meaning of country
rock (_zechstein_), hanging and footwalls (_hangends_ and _liegends_),
the strike (_streichen_), dip (_fallen_), and outcrop (_ausgehen_). Of
the latter two varieties are given, one of the "whole vein," the other
of the _gesteins_, which may be the ore-shoot. Various veins are
illustrated, and also for the first time a mining compass. The account
of the origin of the metals is a muddle of the Peripatetics, the
alchemists, and the astrologers, for which acknowledgment to Albertus
Magnus is given. They are represented to originate from quicksilver and
sulphur through heat, cold, dampness, and dryness, and are drawn out as
exhalations through the veins, each metal owing its origin to the
special influence of some planet; the Moon for silver, Saturn for lead,
etc. Two types of veins are mentioned, "standing" (_stehendergang_) and
flat (_flachgang_). Stringers are given the same characteristics as
veins, but divided into hanging, footwall, and other varieties.
Prominence is also given to the _geschick_ (selvage seams or joints?).
The importance of the bearing of the junctions of veins and stringers
on enrichment is elaborated upon, and veins of east-west strike lying
upon a south slope are considered the best. From the following notes it
will be seen that two or three other types of deposits besides veins are
referred to.

In describing silver veins, of peculiar interest is the mention of the
association of bismuth (_wismuth_), this being, we believe, the first
mention of that metal, galena (_glantz_), quartz (_quertz_), spar
(_spar_), hornstone (_hornstein_), ironstone and pyrites (_kies_), are
mentioned as gangue materials, "according to the mingling of the various
vapours." The term _glasertz_ is used, but it is difficult to say if
silver glance is meant; if so, it is the first mention of this mineral.
So far as we know, this is the first use of any of the terms in print.
Gold alluvial is described, part of the gold being assumed as generated
in the gravel. The best alluvial is in streams running east and west.
The association of gold with pyrites is mentioned, and the pyrites is
found "in some places as a complete stratum carried through
horizontally, and is called a _schwebender gang_." This sort of
occurrence is not considered very good "because the work of the heavens
can be but little completed on account of the unsuitability of the
position." Gold pyrites that comes in veins is better. Tin is mentioned
as found in alluvial, and also in veins, the latter being better or
worse, according to the amount of pyrites, although the latter can be
burned off. Tin-stone is found in masses, copper ore in schist and in
veins sometimes with pyrites. The ore from veins is better than schist.
Iron ore is found in masses, and sometimes in veins; the latter is the
best. "The iron veins with good hanging- and foot-walls are not to be
despised, especially if their strike be from east to west, their dip to
the south, the foot-wall and outcrop to the north, then if the ironstone
is followed down, the vein usually reveals gold or other valuable ore".
Lead ore is found in _schwebenden gang_ and _stehenden gang_.
Quicksilver, like other ore, is sometimes found in brown earth, and
sometimes, again, in caves where it has run out like water. The
classification of veins is the same as in _De Re Metallica_.[12] The
book generally, however, seems to have raised Agricola's opposition, for
the quotations are given in order to be demolished.

_Probierbuechlein._ Agricola refers in the Preface of _De Re Metallica_
to a work in German on assaying and refining metals, and it is our
belief that it was to some one of the little assay books published early
in the 16th century. There are several of them, seemingly revised
editions of each other; in the early ones no author's name appears,
although among the later editions various names appear on the title
page. An examination of these little books discloses the fact that their
main contents are identical, for they are really collections of recipes
after the order of cookery books, and intended rather to refresh the
memory of those already skilled than to instruct the novice. The books
appear to have grown by accretions from many sources, for a large number
of methods are given over and over again in the same book with slight
variations. We reproduce the title page of our earliest copy.

[Illustration 612 (Title page)]

The following is a list of these booklets so far as we have been able to
discover actual copies:--

  _Date._  _Place._     _Publisher._    _Title (Short)._         _Author._

  Unknown  Unknown      Unknown         _Probierbuechlein_        Anon.
            (Undated; but catalogue of British Museum suggests Augsburg, 1510.)

  1524     Magdeburg                    _Probirbuechleyn          Anon.
                                          tzu Gotteslob_

  1531     Augsburg     Unknown         _Probierbuch aller       Anon.
                                          Sachsischer Ertze_

  1533     Frankfurt a.                 _Bergwerck und           Anon.
             Meyn                         Probierbuechlein_

  1534     Augsburg     Heinrich        _Probirbuechlein_         Anon.
                         Steyner, 8vo.

  1546     Augsburg     Ditto, ditto    _Probirbuechlein_         Anon.

  1549     Augsburg     Ditto, ditto    _Probirbuechlein_         Anon.

  1564     Augsburg     Math. Francke,  _Probirbuechlein_         Zach. Lochner
                          4to

  1573     Augsburg     8vo.            _Probirbuch_             Sam. Zimmermann

  1574     Franckfurt                   _Probierbuechlein_        Anon.
             a. Meyn

  1578     Ditto                        _Probierbuechlein Fremde  Cyriacus
                                           und subtile Kunst_     Schreittmann

  1580     Ditto                        _Probierbuechlein_        Anon.

  1595     Ditto                        _Probierbuechlein darinn  Modestin Fachs
                                          gruendlicher Bericht_

  1607     Dresden      4to             _Metallische Probier     C. C. Schindler
                                          Kunst_
                                        _Bericht vom Ursprung und
                                          Erkenntniss der
                                          Metallischen erze_

  1669     Amsterdam                    _Probierbuechlein darinn  Modestin Fachs
                                          gruendlicher Bericht_

  1678     Leipzig                      _Probierbuechlein darinn  Modestin Fachs
                                          gruendlicher Bericht_

  1689     Leipzig                      _Probierbuechlein darinn  Modestin Fachs
                                          gruendlicher Bericht_

  1695     Nuernberg     12mo.           _Deutliche Vorstellung   Anon.
                                          der Probier Kunst_

  1744     Luebeck       8vo.            _Neu-eroeffnete Probier    Anon.
                                          Buch_

  1755     Frankfurt    8vo.            _Scheid-Kuenstler ...      Anon.
            and Leipzig                   alle Ertz und Metalle
                                          ... probiren_

  1782     Rotenburg an   8vo.          _Probierbuch aus          K. A. Scheidt
             der Fulde                    Erfahrung aufgesetzt_

As mentioned under the _Nuetzlich Bergbuechlein_, our copy of that work,
printed in 1533, contains only a portion of the _Probierbuechlein_.
Ferguson[13] mentions an edition of 1608, and the Freiberg School of
Mines Catalogue gives also Frankfort, 1608, and Nuernberg, 1706. The
British Museum copy of earliest date, like the title page reproduced,
contains no date. The title page woodcut, however, in the Museum copy is
referred from that above, possibly indicating an earlier date of the
Museum copy.

The booklets enumerated above vary a great deal in contents, the
successive prints representing a sort of growth by accretion. The first
portion of our earliest edition is devoted to weights, in which the
system of "lesser weights" (the principle of the "assay ton") is
explained. Following this are exhaustive lists of touch-needles of
various composition. Directions are given with regard to assay furnaces,
cupels, muffles, scorifiers, and crucibles, granulated and leaf metals,
for washing, roasting, and the preparation of assay charges. Various
reagents, including glass-gall, litharge, salt, iron filings, lead,
"alkali", talc, argol, saltpetre, sal-ammoniac, alum, vitriol, lime,
sulphur, antimony, _aqua fortis_, or _scheidwasser_, etc., are made use
of. Various assays are described and directions given for crucible,
scorification, and cupellation tests. The latter part of the book is
devoted to the refining and parting of precious metals. Instructions are
given for the separation of silver from iron, from lead, and from
antimony; of gold from silver with antimony (sulphide) and sulphur, or
with sulphur alone, with "_scheidwasser_," and by cementation with salt;
of gold from copper with sulphur and with lead. The amalgamation of gold
and silver is mentioned.

The book is diffuse and confused, and without arrangement or system,
yet a little consideration enables one of experience to understand most
statements. There are over 120 recipes, with, as said before, much
repetition; for instance, the parting of gold and silver by use of
sulphur is given eight times in different places. The final line of the
book is: "Take this in good part, dear reader, after it, please God,
there will be a better." In truth, however, there are books on assaying
four centuries younger that are worse. This is, without doubt, the first
written word on assaying, and it displays that art already full grown,
so far as concerns gold and silver, and to some extent copper and lead;
for if we eliminate the words dependent on the atomic theory from modern
works on dry assaying, there has been but very minor progress. The art
could not, however, have reached this advanced stage but by slow
accretion, and no doubt this collection of recipes had been handed from
father to son long before the 16th century. It is of wider interest that
these booklets represent the first milestone on the road to quantitative
analysis, and in this light they have been largely ignored by the
historians of chemistry. Internal evidence in Book VII. of _De Re
Metallica_, together with the reference in the Preface, leave little
doubt that Agricola was familiar with these booklets. His work, however,
is arranged more systematically, each operation stated more clearly,
with more detail and fresh items; and further, he gives methods of
determining copper and lead which are but minutely touched upon in the
_Probierbuechlein_, while the directions as to tin, bismuth, quicksilver,
and iron are entirely new.

Biringuccio (Vanuccio). We practically know nothing about this author.
From the preface to the first edition of his work it appears he was
styled a mathematician, but in the text[14] he certainly states that he
was most of his time engaged in metallurgical operations, and that in
pursuit of such knowledge he had visited Germany. The work was in
Italian, published at Venice in 1540, the title page of the first
edition as below:--

[Illustration 614 (Title page)]

It comprises ten chapters in 168 folios demi-octavo. Other Italian
editions of which we find some record are the second at Venice, 1552;
third, Venice, 1558; fourth, Venice, 1559; fifth, Bologna, 1678. A
French translation, by Jacques Vincent, was published in Paris, 1556,
and this translation was again published at Rouen in 1627. Of the ten
chapters the last six are almost wholly devoted to metal working and
founding, and it is more largely for this description of the methods of
making artillery, munitions of war and bells that the book is
celebrated. In any event, with the exception of a quotation which we
give on page 297 on silver amalgamation, there is little of interest on
our subject in the latter chapters. The first four chapters are
undoubtedly of importance in the history of metallurgical literature,
and represent the first work on smelting. The descriptions are, however,
very diffuse, difficult to follow, and lack arrangement and detail. But
like the _Probierbuechlein_, the fact that it was written prior to _De Re
Metallica_ demands attention for it which it would not otherwise
receive. The ores of gold, silver, copper, lead, tin, and iron are
described, but much interrupted with denunciations of the alchemists.
There is little of geological or mineralogical interest, he too holding
to a muddle of the classic elements astrology and alchemy. He has
nothing of consequence to say on mining, and dismisses concentration
with a few words. Upon assaying his work is not so useful as the
_Probierbuechlein_. On ore smelting he describes the reduction of iron
and lead ores and cupriferous silver or gold ores with lead. He gives
the barest description of a blast furnace, but adds an interesting
account of a _reverbero_ furnace. He describes liquation as consisting
of one operation; the subsequent treatment of the copper by refining
with an oxidizing blast, but does not mention poling; the cupellation of
argentiferous lead and the reduction of the litharge; the manufacture of
nitric acid and that method of parting gold and silver. He also gives
the method of parting with antimony and sulphur, and by cementation with
common salt. Among the side issues, he describes the method of making
brass with calamine; of making steel; of distilling quicksilver; of
melting out sulphur; of making vitriol and alum. He states that
_arsenico_ and _orpimento_ and _etrisagallio_ (realgar) are the same
substance, and are used to colour copper white.

In general, Biringuccio should be accredited with the first description
(as far as we are aware) of silver amalgamation, of a reverberatory
furnace, and of liquation, although the description is not complete.
Also he is, so far as we are aware, the first to mention cobalt blue
(_Zaffre_) and manganese, although he classed them as "half" metals. His
descriptions are far inferior to Agricola's; they do not compass
anything like the same range of metallurgy, and betray the lack of a
logical mind.

_Other works._ There are several works devoted to mineralogy, dating
from the fifteenth and early sixteenth centuries, which were, no doubt,
available to Agricola in the compilation of his _De Natura Fossilium_.
They are, however, practically all compiled from the jeweller's point of
view rather than from that of the miner. Among them we may mention the
poem on precious stones by Marbodaeus, an author who lived from 1035 to
1123, but which was first printed at Vienna in 1511; _Speculum Lapidum_,
a work on precious stones, by Camilli Leonardi, first printed in Venice
in 1502. A work of wider interest to mineralogists is that by Christoph
Entzelt (or Enzelius, Encelio, Encelius, as it is variously given),
entitled _De Re Metallica_, and first printed in 1551. The work is five
years later than _De Natura Fossilium_, but contains much new material
and was available to Agricola prior to his revised editions.


FOOTNOTES:

[1] See pages 44 and 46.

[2] Page 75.

[3] _Der Mineralog Georgius Agricola_, Zwickau, 1889, p. 46.

[4] Andreas Moeller, _Theatrum Freibergense Chronicum_, etc., Freiberg,
1653.

[5] Paris, 1897, Vol. I. p. 501.

[6] Cantor Lectures, London, April 1892.

[7] Hans von Dechen, _Das aelteste deutsche Bergwerksbuch_, reprint from
_Zts. fuer Bergrecht Bd. XXVI._, Bonn, 1885.

[8] Panzer's _Annalen_, Nuernberg, 1782, p. 422, gives an edition Worms
_bei_ Peter Schoefern, 1512.

[9] The Royal Library at Dresden and the State Library at Munich have
each a copy, dated 1518, Worms.

[10] Hans von Decken _op. cit._, p. 48-49.

[11] _Annales typographiae augustanae ab ejus origine, MCCCLXVI. usque
ad. an. M.D.XXX. Accedit dom Franc. Ant. Veith. Diatribe de origine ...
artis typographicae in urbe augusta vindelica edidit...._ Georgius G.
Zapf., Augsburg, 1778, X. p. 23.

[12] See p. 44.

[13] _Bibliotheca Chemica_.

[14] Book I., Chap. 2.




APPENDIX C.

WEIGHTS AND MEASURES.


As stated in the preface, the nomenclature to be adopted for weights and
measures has presented great difficulty. Agricola uses, throughout, the
Roman and the Romanized Greek scales, but in many cases he uses these
terms merely as lingual equivalents for the German quantities of his
day. Moreover the classic language sometimes failed him, whereupon he
coined new Latin terms adapted from the Roman scale, and thus added
further confusion. We can, perhaps, make the matter clearer by an
illustration of a case in weights. The Roman _centumpondium_, composed
of 100 _librae_, the old German _centner_ of 100 _pfundt_, and the
English hundredweight of 112 pounds can be called lingual equivalents.
The first weighs about 494,600 Troy grains, the second 721,900, and the
third 784,000. While the divisions of the _centumpondium_ and the
_centner_ are the same, the _libra_ is divided into 12 _unciae_ and the
_pfundt_ into 16 _untzen_, and in most places a summation of the units
given proves that the author had in mind the Roman ratios. However, on
p. 509 he makes the direct statement that the _centumpondium_ weighs 146
_librae_, which would be about the correct weight if the _centumpondium_
referred to was a _centner_. If we take an example such as "each
_centumpondium_ of lead contains one _uncia_ of silver", and reduce it
according to purely lingual equivalents, we should find that it runs
24.3 Troy ounces per short ton, on the basis of Roman values, and 18.25
ounces per short ton, on the basis of old German. If we were to
translate these into English lingual equivalents of one ounce per
hundredweight, then the value would be 17.9 ounces per short ton.

Several possibilities were open in translation: first, to calculate the
values accurately in the English units; second, to adopt the nearest
English lingual equivalent; third, to introduce the German scale of the
period; or, fourth, to leave the original Latin in the text. The first
would lead to an indefinite number of decimals and to constant doubt as
to whether the values, upon which calculations were to be based, were
Roman or German. The second, that is the substitution of lingual
equivalents, is objectionable, not only because it would indicate values
not meant by the author, but also because we should have, like Agricola,
to coin new terms to accommodate the lapses in the scales, or again to
use decimals. In the third case, that is in the use of the old German
scale, while it would be easier to adapt than the English, it would be
more unfamiliar to most readers than the Latin, and not so expressive in
print, and further, in some cases would present the same difficulties of
calculation as in using the English scale. Nor does the contemporary
German translation of _De Re Metallica_ prove of help, for its
translator adopted only lingual equivalents, and in consequence the
summation of his weights often gives incorrect results. From all these
possibilities we have chosen the fourth, that is simply to reproduce the
Latin terms for both weights and measures. We have introduced into the
footnotes such reductions to the English scale as we considered would
interest readers. We have, however, digressed from the rule in two
cases, in the adoption of "foot" for the Latin _pes_, and "fathom" for
_passus_. Apart from the fact that these were not cases where accuracy
is involved, Agricola himself explains (p. 77) that he means the German
values for these particular terms, which, fortunately, fairly closely
approximate to the English. Further, we have adopted the Anglicized
words "digit", "palm", and "cubit", instead of their Latin forms.

For purposes of reference, we reproduce the principal Roman and old
German scales, in so far as they are used by Agricola in this work, with
their values in English. All students of weights and measures will
realize that these values are but approximate, and that this is not an
occasion to enter upon a discussion of the variations in different
periods or by different authorities. Agricola himself is the author of
one of the standard works on Ancient Weights and Measures (see Appendix
A), and further gives fairly complete information on contemporary scales
of weight and fineness for precious metals in Book VII. p. 262 etc., to
which we refer readers.

  ROMAN SCALES OF WEIGHTS.

                                       Troy Grains.
    1 _Siliqua_   =                          2.87
    6 _Siliquae_  = 1 _Scripulum_           17.2
    4 _Scripula_  = 1 _Sextula_             68.7
    6 _Sextulae_  = 1 _Uncia_              412.2
   12 _Unciae_    = 1 _Libra_             4946.4
  100 _Librae_    = 1 _Centumpondium_   494640.0

  Also

    1 _Scripulum_ =                         17.2
    3 _Scripula_  = 1 _Drachma_             51.5
    2 _Drachmae_  = 1 _Sicilicus_          103.0
    4 _Sicilici_  = 1 _Uncia_              412.2
    8 _Unciae_    = 1 _Bes_               3297.6

  SCALE OF FINENESS
  (AGRICOLA'S ADAPTATION).

    4 _Siliquae_          = 1 Unit of _Siliquae_
    3 _Units of Siliquae_ = 1 _Semi-sextula_
    4 _Semi-sextulae_     = 1 _Duella_
   24 _Duellae_           = 1 _Bes_

  OLD GERMAN SCALE OF WEIGHTS.
                                      Troy Grains.
    1 _Pfennig_   =                         14.1
    4 _Pfennige_  = 1 _Quintlein_           56.4
    4 _Quintlein_ = 1 _Loth_               225.6
    2 _Loth_      = 1 _Untzen_             451.2
    8 _Untzen_    = 1 _Mark_              3609.6
    2 _Mark_      = 1 _Pfundt_            7219.2
  100 _Pfundt_    = 1 _Centner_         721920.0

  SCALE OF FINENESS.

    3 _Grenlin_ = 1 _Gran_
    4 _Gran_    = 1 _Krat_
   24 _Krat_    = 1 _Mark_

  ROMAN LONG MEASURE.
                                     Inches.
    1 _Digitus_     =                    .726
    4 _Digiti_      = 1 _Palmus_        2.90
    4 _Palmi_       = 1 _Pes_          11.61
    1-1/2 _Pedes_   = 1 _Cubitus_      17.41
    5 _Pedes_       = 1 _Passus_       58.1

  Also

    1 Roman _Uncia_ =                    .97
   12 _Unciae_      = Pes              11.61

  GREEK LONG MEASURE.
                                     Inches.
    1 _Dactylos_    =                    .758
    4 _Dactyloi_    = 1 _Palaiste_      3.03
    4 _Palaistai_   = 1 _Pous_         12.135
    1-1/2 _Pous_    = 1 _Pechus_       18.20
    6 _Pous_        = 1 _Orguia_       72.81

  OLD GERMAN LONG MEASURE.
                                     Inches.
    1 _Querfinger_  =                    .703
   16 _Querfinger_  = 1 _Werckschuh_   11.247
    2 _Werckschuh_  = 1 _Elle_         22.494
    3 _Elle_        = 1 _Lachter_      67.518

  Also

    1 _Zoll_        =                    .85
   12 _Zoll_        = 1 _Werkschuh_

  ROMAN LIQUID MEASURE.
                               Cubic inches.  Pints.
   1 _Quartarius_ =                  8.6        .247
   4 _Quartarii_  = 1 _Sextarius_   31.4        .991
   6 _Sextarii_   = 1 _Congius_    206.4       5.947
  16 _Sextarii_   = 1 _Modius_     550.4      15.867
   8 _Congii_     = 1 _Amphora_   1650.0      47.577

     (Agricola nowhere uses the Saxon liquid measures, nor do they
     fall into units comparable with the Roman).




GENERAL INDEX.

NOTE.--The numbers in heavy type refer to the Text; those in plain type
to the Footnotes, Appendices, etc.


  Abandonment of Mines, =217=

  Abertham.
    Mines at, =74=; =92=; 74

  Abolite, 113

  _Abstrich_, 465; 492

  Abydos.
    Gold mines of, =26=; 27
    Lead figure from, 390

  _Abzug_, 464; 465; 475

  _Achates_ (_see_ Agate).

  Accidents To Miners, =214-218=

  Accounts (Mining), =96-98=

  Adit, 101

  _Aeris flos_ (_see_ Copper Flowers).

  _Aeris squama_ (_see_ Copper Scales).

  _Aes caldarium_, 109

  _Aes luteum_, 109

  _Aes nigrum_, 109

  _Aes purum fossile_ (_see_ Native Copper).

  _Aes rude plumbei coloris_ (_see_ Copper Glance).

  _Aes ustum_ (_see_ Roasted Copper).

  _Aetites_, 2

  Africa.
    Iron, 420
    Tin, 412

  Agate, 114

  Agriculture.
    Mining compared with, =5=

  Ailments of Miners (_see_ Maladies of Miners).

  Air Currents in Mines, =121=; =200=

  Alabaster, 114

  Alchemists, XXVII-XXX; 44; 608
    Agricola's opinion of, XII; =XXVII.=
    Amalgamation, 297
    Assaying, =248=; 219
    Discovery of acids, 439; 460
    Distillation, 441

  Aljustrel Tablet, 83-84

  Alkali, 558

  Alloys, Assaying of, =247-252=

  Alluvial Mining, =321-348=; 330-332

  Alston Moor, 84

  Altenberg, =XXXI=; VI.
    Collapse of mine, =216=
    Miners poisoned, =214=
    Tin working appliances, =290=; =304=; =318=

  Alum, =564-568=; 564-570
    A solidified juice, 1
    Elizabethan Charter, 283
    In roasted pyrites, =350=
    In _Sal artificiosus_, =463=
    Latin and German terms, 220; 221
    Papal monopoly, 570
    Use in making nitric acid, =439=; 460

  Amalgam.
    Parting the gold from, =298=; 297

  Amalgamation, 297
    Of gilt objects, =461=
    Mills, =295-299=

  Amber, =34=; 35

  Amethyst, 114

  _Amiantus_ (_see_ Asbestos).

  Ampulla, =445-447=; 220

  Annaberg, VI; =XXXI=; =42=; =75=; 75
    Profits, =92=

  Ant, venomous, =216=

  Antimony, 220; 428; 354
    Minerals, 110
    Smelting of, =400=; =428=
    Use as type-metal, 2; 429

  Antimony Sulphide, 220; 428; 451
    Parting gold and silver with, =451=; 451; 461
    Parting gold from copper, =463=
    Parting silver and iron, =544=

  Antwerp, Scale of Weights, =263=

  Apex Law, 81; 83-86

  _Aqua regia_, 439; 441; 354

  _Aqua valens_ (_see also_ Nitric Acid), =439-443=; 439; 220
    Clarification with silver, =443=; 443
    Cleansing gold-dust with, =396=
    Parting precious metals with, =443-447=

  _Arbores dissectae_ (Lagging), 101

  Archimedes, Screw of, 149

  Architecture.
    Knowledge necessary for miners, =4=

  _Area fodinarum_ (_see_ Meer).

  Argentiferous Copper Ores, Smelting of, =404-407=

  Argentite, 109

  _Argentum purum in venis_ (_see_ Native Silver).

  _Argentum rude plumbei coloris_ (_see_ Silver Glance).

  _Argentum rude rubrum translucidum_ (_see_ Ruby Silver).

  Argol, 234; 220
    As a flux, =234=; =238=; =243=
    Use in melting silver nitrate, =447=
    Use in smelting gold dust, =396-398=

  Argonauts, 330

  Arithmetical Science.
    Knowledge necessary for miners, =4=

  Armenia, Stone of, 115

  Arsenic (_see also_ Orpiment _and_ Realgar), 111; 214

  _Arsenicum_, 111

  Arsenopyrite, 111

  Asbestos, =440=; 440; 114

  Ash-coloured Copper, =539-540=; 540; 523-524; 492
    From liquation, =529-530=

  Ashes which Wool Dyers use (_see also_ Potash), 233; 559; 220
    Use in assaying, =236-238=

  Ash of Lead, =237-238=; 237; 220

  Ash of Musk Ivy (_see also_ Potash and _Nitrum_), =236-238=; 220

  Asphalt, 581

  _Asphaltites_ (_see_ Dead Sea).

  Assay Balances (_see_ Balances).

  Assay Fluxes (_see_ Fluxes).

  Assay Furnaces, =224-228=; 220
    Crucible, =226-227=
    Muffle, =224-228=; =239=

  Assaying (_see also_ _Probierbuechlein_), =219=; 219; 220; 354
    Amalgamation, =243=
    Bismuth, =247=
    Copper, =244=
    Cupellation, =240=
    Gold and silver alloys, =248=
    Gold ore, =242-244=
    Iron ore, =247=
    Lead, =245-246=
    Silver, =242-245=
    Silver and copper alloys, =249-250=
    Tin, =246=
    Tin and silver alloys, =251=

  Assay Muffles (_see_ Muffles).

  Assay Ton, =261=; 242

  Assyrian Copper, 402

  Asthma, =214=

  Astronomy.
    Knowledge necessary for miners, =4=

  Atarnea.
    Mines near, =26=; 27

  Athens.
    Mining law, 83
    Sea power and mines, 27
    Silver mines (_see_ Mt. Laurion, Mines of).

  _Atramentum Sutorium_ (_see also_ Vitriol), 572; 110

  _Atramentum Sutorium candidum_, 113

  _Atramentum Sutorium rubrum_, =274=; 274

  _Aurichalcum_, 409; 404

  _Auripigmentum_ (_see_ Orpiment).

  Azure, 1; 109; 220
    An indication of copper, =116=
    An indication of gold, =117=
    Colour of flame, =235=

  Azurite 109; 220; 402


  Babel, Tower of, 582

  Babylonia.
    Bitumen in, 582
    Use of lead, 391

  Babytace.
    Gold buried by inhabitants, =9=; =15=

  Baebelo, =42=; 42

  Balances, =224=; =264-265=

  Barite, 115

  Barmaster, of High Peak, 77

  Bars, for Furnace Work, =382=

  Baskets, for Hoisting, =153=

  Batea, =156=

  Beer, =230=; 220

  Bell, to call Workmen, =100=

  Bellows, =362-373=; =419=
    Ancient use of, 354; 355; 362
    Assay furnace, =226=; =245=
    Mine ventilation with, =207-210=

  Beni Hassen, Inscriptions at, 586

  _Berg-geel_, 111

  Bergmeister, =33=; =81=; =95=; =77=; 77; 78
    Deals with forfeited shares, =92-93=
    Jurors, =96=

  Bergmeister's Clerk, =95=; 78

  _Bergzinober_ (_see_ Quicksilver).

  Bermius (Bermium), Mt. (_see_ Mt. Bermius).

  Bismuth, =433=; 354; 220
    Assaying ores of, =247=
    Indication of silver, =116=
    Minerals, 2; 111
    Smelting of, =433-437=; =400=
    The "roof of silver," =117=; 433
    _Zaffre_, 112

  Bitumen.
    Ancient knowledge of, 220; 581-582; 354
    Colour of fumes, =235=
    Dead Sea, =33=
    Distillation, =581=
    From springs, =582=
    Harmful to metals, =273=
    Roasting from ore, =273=; =276=; =351=
    Solidified juice, =1=

  _Bituminosa cadmia_ (_see_ _Cadmia bituminosa_).

  Blast, Regulation of, =380=; =386=

  Blasting, 119

  Blende, 113

  Bleyberg, 239

  Bloodstone, 111; 2

  Bloom, 420

  _Bluetstein_ (_see_ Ironstone).

  Bohemia.
    Antimony sulphide, 428
    Pestilential vapours, =216=
    Sifting ore in, =293=
    Smelting, =384=

  Bone-ash, =230=; 466

  Borax, 560; 221; 110
    Method of manufacture, =560=
    Use in gold smelting, =444=; =457=; =464=
    Use in assaying, =245=; =246=

  Bornite, 109

  Boundary Stones, =87=; 129

  Boundaries, =77=; =147=

  Bowls for Alluvial Washing, =322=; =324=; =334=; =336=

  Brass, 410; 354; 2
    Ancient methods of making, 404-405; 112

  Breaking Ore, =117-119=

  Brick Dust.
    Used in cementation, =454=; 454
    Used in making nitric acid, =440=

  Brine (_see also_ Salt).
    Evaporation of, =547-548=

  Britain.
    Lead-silver smelting, 392
    Miners mentioned by Pliny, 83
    Tin trade, 411-413

  British Museum.
    Egyptian gold-mining, 399
    Egyptian lead, 390
    Egyptian steel, 402

  Bromyrite, 109

  Bronze.
    Historical notes, 411; 402; 354

  Bronze Age, 355; =402=; 411

  Bryle (Outcrop), 101

  Buckets, for Hoisting Ore, =153-154=; =157=

  Buddle, 281; 282; 267
    Divided, =302-303=
    Simple, =300-302=; =312-315=

  Bullion, Pouring into Bars, =382=

  Burning Ore, =231=; =273=; 267

  Burnt Alum, =233=; 565; 221


  _Cadmia_ (_see also_ Zinc, _Pompholyx_, _and_ Cobalt), =542=; 542;
    112-113
    Ancient ore of brass, 410
    From dust chambers, =394=
    From liquation, =539=; 542
    From roasting matte, =349=
    Poisonous to miners, =214=; 214
    Roasting, =276=
    Smelting for gold and silver, =410=

  _Cadmia bituminosa_, =276=; 273; 113

  _Cadmia fornacis_ (_see_ Furnace Accretions).

  _Cadmia fossilis_ (_see_ Calamine _and_ Blende).

  _Cadmia metallica_ (_see also_ Cobalt), =403=; 113

  _Caeruleum_ (_see_ Azure).

  Cakes of Melted Pyrites, 379; 222
    A flux, =234=
    Roasting of, =349-351=
    Use in smelting, =379=

  Calaem (_see also_ Zinc), =409=

  Calamine, 112; 113; 409; 410

  Calcite, 114

  Calcspar, =116=; 114

  _Caldarium_ Copper, =512=; =542=; 404; 511

  Caldrons, for Evaporating Salts, =548=

  _Calmei_ (_see_ Calamine).

  Cameros.
    Zinc found at, 409

  Camphor, =238=; 238; 221

  Cam-shaft, =282-283=; 267

  _Canales_ (Ore Channels), 43; 46; 47
    Ore shoots in, =117=

  Cannon, =11=

  Cardinal Points, =57=; =58=

  Carnelian, 114

  _Carneol_ (_see_ Carnelian).

  _Carni_, 390
    Cupellation, =483=
    Smelting of lead ores, =390=

  Carpathian Mountains.
    Liquation practice in, =540=; =544=
    Sieves, =289=
    Stamp-milling, =319=

  Carthage.
    Mines in Spain, =27=

  Castulo (Cazlona), 42

  Cementation (_see also_ Parting Gold from Silver), =453-457=; 453; 458

  _Centumpondium_, 616; 242; 509
    Scale of weights, =260-261=

  Cerargurite, 109

  _Cerussa_ (_see_ White-lead).

  Cerussite, 110

  Chain Pumps, =171-175=

  Chalcanthite, 110

  _Chalcanthum_ (_see also_ Vitriol), 109; 572

  Chalcedony, 114

  _Chalcitis_, 573; 109
    Indication of copper, =116=

  Chalcocite, 109; 402

  Chalcopyrite, 109

  Chaldean Antimony, 429

  Chemistry.
    Origin, XXVII; 220

  Chemnitz.
    Agricola appointed city physician, VII.
    Agricola elected burgomaster, VIII; IX.
    Quarrel over Agricola's burial, XI.

  China, Grand Canal of, 129

  Chinese.
    Early copper smelting, 402
    Early iron, 421
    Early silver metallurgy, 391
    Early zinc smelting, 409

  _Chrysocolla_ (_see also_ Borax), 110; 221; 584; 1
    Collection in vats, =584=
    Colour of fumes, =235=
    Indication of copper, =116=
    Indication of gold, =117=
    Mineral, 109
    Smelting of, =401=

  Church, Share in Mines, =91=

  Cimolite, 31

  Cinnabar (_see_ Quicksilver _and_ _Minium_).

  Claim, in American Title, 77

  Cloth.
    Lining sluices, =322=
    Ventilation by shaking, =210=

  Coal, 34

  Cobalt, 354; 542; 112-113
    Cobalt-blue, 112; 433
    From lead smelting, 408
    King Hiram's experience with, 214
    Poisonous to miners, 214
    Relation to _cadmia_, 112
    Relation to bismuth, 435
    Smelting ores of, 401

  Cobalt-Arsenic Minerals (_see_ Arsenic).

  Cobaltite, 113

  _Cobaltum cineraceum_ (_see_ Smallite).

  _Cobaltum ferri colore_ (_see_ Cobaltite).

  _Cobaltum nigrum_ (_see_ Abolite).

  Coiners, =95=; 78

  Coins, =251-253=; =457=

  Colchis.
    Alluvial gold washing, =330=

  Cologne.
    Scale of weights, =263=

  Companies, Mining, =89-93=; 90
    Fraudulent dealing, =22=
    Investment in, =29=

  Compass, =141-142=; 56; 129
    Divisions of the, =56=; =57=
    Swiss, =145=; 137

  Concentrates.
    From washing liquation products, =542=
    Sintering of, =401=
    Smelting of, =394=; =396-399=; =401=

  Concentration, =267-348=; 279; 354

  _Congius_, 153; 172, 617

  Constantinople, Alum Trade, 569

  Consumption.
    Miners liable to, =214=

  _Conterfei_ (_see_ Zinc).

  Contracts, Method of Setting, =96=

  Copiapite, 111

  Copper (_see also_ Liquation), 109; 402; 511
    Assay of, =244=; =249=
    Granulation of, =250=
    Indications of, =116=
    Parting from gold, =462-464=
    Parting gold from silver, =448-451=; 448
    Ratio in liquation cakes, 505; 506
    Residues from liquation, =521=
    Rosette, =538=

  Copper-filings, =233=; 233; 221

  Copper flowers, =538=; 110; 233; 538
    Pliny's description, 404

  Copper Glance, =401=; 109

  Copper Matte.
    Roasting, =350=
    Smelting, =404-407=

  Copper Ore (_see also_ Copper Smelting, _etc._), 109
    Assaying, =244-245=

  Copper Pyrites, =117=; 109

  Copper Refining, =530-538=; 354; 492; 535-536
    Breaking cakes, =501-503=
    Enrichment of silver by settling, 510
    Roman method, 404
    Rosette copper, 535

  Copper Scales, 110; 221; 233; 539
    Use in assaying, =245=

  Copper Schists (_see also_ Mannsfeld Copper Slates), 127
    Method of smelting, =408=

  Copper Smelting, =388-390=; =401=; =404=; 402
    Invention of appliances, 353-354

  Cornwall.
    Ancient tin mining, 413
    Early German miners, 282
    Early mining law, 85
    Early ore dressing, 282
    Influence on German mining, 283
    "Knockers," 217
    Mining terms, 77; 101; 267; 282
    Royal Geol. Soc. Transactions, 84

  _Coticula_ (_see_ Touchstone).

  _Counterfeht_ (_see_ Zinc).

  Crane.
    For cupellation furnaces, =476-477=
    For lead cakes, =500=
    For liquation cakes, =514=

  Cremnitz.
    Age of mines, =5=
    Width of veins, =52=

  Crinoid Stems, 115

  Croppings, =37=; 37

  Crosscuts, =106=

  Crowbars, =152=

  Crucible.
    Assay, =228=; =230=; =241=; =245=; 221
    Of blast furnaces, =376=; =377=

  _Crudaria_, 65

  Crushing Mills (_see_ Stamp-mill _and_ Mills).

  Crushing Ore, =231=; =279-287=; 279

  Crystal (_Crystallum_), 114

  Cumberland.
    Early report on ores of, 267
    Roman lead furnaces, 392

  Cup-Bearer.
    Right to a meer, =81=

  Cupellation, =464-483=; 465-466
    Buildings and furnaces, =464-472=; 492
    Brightening of the silver, =241=, =475=
    In assaying, =240=
    In "tests," =483=
    Latin and German terms, 221; 492
    Litharge, =475=

  Cupels, =228-230=; 221; 466
    Drying of, =240=
    Moulds, =231=

  Cupric Oxide, 221

  Cuprite, 109; 402

  _Cyanus_ (_see also_ Azurite), 110

  Cyprus.
    Ancient copper smelting, 402


  _Dach_, 127

  _Dactylos_, 617; 78

  Dangers to Miners, =214-218=

  _Darrlinge_, 492

  _Darrofen_, 492

  _Darrsoehle_, 492

  Dawling, of a Vein, 101

  Dead Sea.
    Bitumen in, =33=

  Decemviral College, =96=

  _Decumanus_ (_see_ Tithe Gatherer).

  _Demensum_ (_see_ Measure).

  Demons (_see also_ Gnomes), =217=; 217

  Derbyshire (_see also_ High Peak).
    Early ore washing, 281
    Introduction jigging sieve, 283
    Mining law, 77; 84-85

  Descent into Mines, =212=

  Devon.
    Mining law, 85

  Dilleugher, 267

  Dioptra, 129

  _Diphrygum_, 404

  Dip of Veins, =65-75=

  Dippas, 101

  Dippers, =157=
    Of pumps, =172=

  _Discretores_ (_see_ Sorters).

  Distillation, 441
    For making nitric acid, =441=
    Of amalgam, =244=
    Of quicksilver, =426-432=

  _Distributor_, 78

  Divining Rod, =38-40=; 38; 40

  Divisions of the Compass, =56=; =57=

  Drainage of Mines, =121=; =171-198=
    With buckets, =171=
    With chain pumps, =172=
    With rag and chain pumps, =188=
    With suction pumps, =172=
    With water bags, =198=

  Drawing.
    Knowledge necessary for miners, =4=

  Drifts, =104=; =105=; 101
    Timbering of, =125=

  Drusy Veins, =107=; 107

  "Drying" Liquation Residues (_see also_ Liquation), =527-529=; 491; 492
    Furnaces for, =521=; =526=; 492
    Silver extracted by, =529=
    Slags from, 523

  Dumps, Working of, =30=

  Dust Chambers, =394=; =416=; 354

  Dutins, (Timbers), 101

  Dynamite, 119


  "Earths."
    Agricola's view of, 1; 46; 48
    Extraordinary, =115=
    Peripatetic view of, 46; 47

  Egyptians.
    Alluvial mining, 330
    Antimony, 428
    Bronze, 402; 411
    Copper smelting, 402
    Crushing and concentration, 279
    Furnaces, 355
    Glass making, 586
    Gold mining, 399
    Iron, 421
    Maps, 129
    Mining law, 83
    Silver and lead metallurgy, 390
    Tin, 411; 412

  Egyptian Screw (_see_ Archimedes, Screw of).

  Eifel.
    Spalling ore, =272=

  _Eisenertz_ (_see_ Ironstone).

  _Eisenglantz_ (_see_ Ironstone).

  Eisleben.
    Heap roasting, =279=; 274

  _Electrum_, 458; 2; 35

  Elements, Peripatetic Theory of, 44

  Emery, 115

  Erbisdorff.
    Tin strakes, =304=

  _Excoctores_ (_see_ Smelters).

  Exhalations.
    From veins, =38=; =44=

  Exhausted Liquation Cakes (_see_ Liquation Cakes, Exhausted).


  Fans, Ventilation, =203-207=

  Fathom, 616; =77=; 78

  _Federwis_, (_see also_ Asbestos), 114; 274

  Feldspar, 114

  _Ferrugo_ (_see_ Iron-rust).

  _Ferrum purum_ (_see_ Native Iron).

  _Fibrae_ (_see_ Stringers).

  Fineness, Scales of, 253; 617

  Fire-setting, =118-120=; 118-119

  Firstum Mines (_see_ Fuerst).

  Fissure Vein (_see_ _Vena profunda_).

  Flame.
    Determination of metal by, =235=
    Determination of required flux by, =235=

  Flint, as a Flux, 380

  Float, from Veins, =37=

  Flookan, 101

  Flue-dust, =394-396=

  _Fluores_ (_see_ Fluorspar).

  Fluorspar, 115; 380; 381
    Indication of ore, =116=

  _Fluesse_ (_see_ Fluorspar).

  Fluxes (_see also_ Argol, Saltpetre, Limestone, Stones which easily
    melt, _etc._), =232-239=; 232; 237; 380; 221
    Basic, 237
    De-sulphurizing, =236=; 237
    For smelting, =379=; =380=; =386=; =390=
    Reducing, =236=; 237
    Stock fluxes for assaying, =236=
    Sulphurizing, =236=; 237

  Footwall, =68=; =117=

  Forehearth, =356=; =375-378=; =386=; 355
    For tin furnaces, =411=; =413=

  Foreman (_see_ Mining Foreman).

  Forest-Fires, =36=; 36

  Forest of Dean, 84

  Forest of Mendip, 84

  _Formae_, 101

  _Fossa latens_ (_see also_ Drifts), 101

  _Fossa latens transversa_ (_see also_ Crosscuts), 101

  _Fossores_ (_see_ Miners).

  Founders' Hoards, 355; 402

  Fractional Meers, =80=

  France.
    Mediaeval mining law, 84

  Free Mining Cities, 84

  Freiberg, =XXXI.=
    Age of the mines, =5=
    Bergmeister, =95=
    Division of shares, =81=; =90=; =91=
    First discovery of veins, =35=; 36
    Flooding of mines, =218=
    Method of cupellation, =482=

  Fullers' Earth, 115

  Fumes.
    From heated ore, =235=
    Poisonous, =215-216=

  _Fundamentum_ (_see also_ Footwall), 101

  _Fundgrube_ (_see also_ Meer), 77

  Furnaces, =374-378=; =386=; =388=; 355; 492
    Assaying (_see_ Assay Furnaces).
    Bismuth smelting, =433-437=
    Burning tin concentrates, =349=
    Cementation, =455=
    Copper smelting, =401-408=
    Cupellation, =467-468=; =482-483=
    "Drying" liquated copper, =522-526=
    Enriching copper bottoms, =510=
    Gold and silver ores, =382-384=
    Heating copper cakes, =503=
    Iron smelting, =420-421=; 420
    Latin and German terms, 220
    Lead ores, =408-410=
    Liquation of silver, =515=
    Melting lead cakes, =498=
    Nitric acid making, =441=
    Parting precious metals with antimony, =452-453=
    Quicksilver distillation, =426-432=
    Refining copper, =531-533=
    Refining silver, =483=; =489=
    Refining tin, =418=
    Roasting, =276-277=
    Smelting liquation slags, =507=
    Tin smelting, =411-413=; =419=

  Furnace Accretions, 113; 221; 492
    Removal of, =376=

  Furnace Hoods, =494=

  Fuerst.
    Mines of, =24=; 24


  _Gaarherd_ (_see_ Refining-hearth).

  _Gaarmachen_ (_see_ Copper Refining).

  Gad, 150

  Galena, 51; 109; 110; 221
    Bismuth distinguished from, 3
    Smelting of, =400-401=

  Gangue Minerals, 48

  Garlic.
    Magnet weakened by, =39=

  Garnets, =334=

  Gases (_see also_ Fumes)
    From fire-setting, =120=

  _Gedigen eisen, silber_, etc. (_see_ Native Iron, Silver, etc.).

  _Gel atrament_ (_see_ _Misy_).

  Gems, =115=; 1

  Geology.
    Agricola's views, 595

  Germans.
    English mining influenced by, 283
    Mining men imported into England, 282
    Ore-dressing methods, 281-282

  _Geschwornen_ (in Saxon mines), 77

  Geyer, =XXXI=; =42=; VI.
    Shafts, 102
    Tin-strakes, =304=

  Gilding, 460
    Removal from objects, =460=; =464=

  Gips (_see_ Gypsum).

  Gittelde.
    Smelting of lead ore, =391=

  _Glantz_ (_see_ Galena).

  _Glasertz_ (_see_ Silver Glance).

  _Glaskoepfe_ (_see_ Ironstone).

  Glass, =584-592=
    Blowing, =592=
    Furnaces, =586-590=
    From sand, 380

  Glass-galls, 235; 221
    As a flux, =235=; =238=; =243=; =246=
    Use in parting gold from copper, =464=
    Use in smelting gold concentrates, =397=; =398=

  _Glette_ (_see_ Litharge).

  _Glimmer_ (_see_ Mica).

  Gnomes.
    In mines, =217=; 112; 214; 217

  Goblins (_see_ Gnomes).

  God's Gift Mine (_see_ Gottsgaab Mine).

  Gold (_see also_ Gold Ores, Parting, Smelting, Stamp-Mill, _etc._).
    Alluvial mining, =321-336=; 330
    Alluvial streams, =75=
    Amalgamation, 297
    Gold-dust, =396=
    Historical notes, 399; 354
    Indications of, =108=; =116=
    Lust for, not the fault of the metal, =16=
    Minerals, 108
    Minerals associated with, =108-109=
    Smelting of ores, =381-382=; =386=; =388=; =390=; =396=
    Wickedness caused by, =9-10=

  Gold Concentrates, =396-399=; 398

  Golden Fleece, =330=; 330

  Gold Ores, =107-108=
    Amalgamation, =295-299=; 297
    Assay by amalgamation, =243-244=
    Assay by fire, =242-243=
    Flux used in assaying, =235=
    Flux used in smelting, =398=
    Smelting in blast furnace, =398-400=
    Smelting cupriferous ores, =404-407=
    Smelting in lead bath, =399=
    Smelting pyritiferous ore, =398-401=
    Stamp-milling, =321=

  _Goldstein_ (_see_ Touchstone).

  Goslar, =5=; =37=; 37
    Lead smelting, =408=
    Native zinc vitriol, 572
    Roasting ores, =274=; 274
    Spalling hard ore, =271=

  Goslarite, 113; 572

  Gottsgaab Mine, VI; VII; =74=; 74

  Gounce, 267

  Grand Canal of China, 129

  Granulation Methods for Bullion, =444=

  Granulation of Copper, =250=

  Greeks.
    Antimony, 428
    Brass making, 410
    Copper smelting, 403
    Iron and steel making, 421
    Metallurgy from Egypt, 402
    Mining law, 83
    Ore dressing, 281
    Quicksilver, 432
    Silver-lead smelting, 391
    Smelting appliances, 355

  Grey Antimony (_see also_ _Stibium_), 110; 221; 428

  Griffins, 331

  Groom of the Chamber.
    Right to a meer, =81=

  Groove (_see also_ Shafts), 101

  Ground Sluices, =336-337=

  Ground Waters, 46-48

  _Gruenspan_ (_see_ Verdigris).

  _Gulden_, 92; 419

  Gunpowder.
    First use for blasting in mines, 119
    Invention of, 562

  Gypsum, 114


  Hade, 101

  _Haematites_ (_see_ Ironstone).

  _Halinitrum_ (_see_ Saltpetre).

  Halle, Salt Industry, =552=

  Hammers, =151=
    With water power, =423=

  Hangingwall, =68=; =117=

  Harz Miners.
    Agricola consulted, VII.
    Antimony sulphide, 428
    First mining charter, 84
    First stamp-mill, 282
    Pumps, =194=

  Hauling Appliances (_see also_ Whims _and_ Windlasses), =160-168=; 149

  Heap Roasting, =274-276=

  Hearth-lead (_see also_ _Molybdaena_), =475=; 476; 110; 221
    As a flux, =232=
    Use in smelting, =379=; =398=; =400=

  Hearths.
    For bismuth smelting, =433-437=
    For melting lead, =390=; =498=

  Heavenly Host Mine (_see_ _Himmelisch Hoez_ Mine).

  Heavy Spar, 115

  Hebrews.
    Knowledge of antimony, 428
    Silver-lead smelting, 391
    Term for tin, 412

  Hematite, 111

  Hemicycle (_Hemicyclium_), =137-138=

  _Heraclion_ (_see_ Lodestone).

  _Herdplei_ (_see_ Hearth-Lead).

  Hiero, King, =247=; 247

  High Peak (Derbyshire).
    Mining law, 84
    Nomenclature in mines, 77
    Saxon customs, connection with, 77; 85

  _Himmelisch Hoez_ mine, =74=; =92=; 75

  Hoe, =152=

  Holidays of Miners, =99=

  Horn Silver, 109

  Horns of Deer, =230=

  Hornstone, =116=; 114

  Hungary.
    Cupellation, =483=

  _Huettenrauch_ (_see_ _Pompholyx_).


  Iglau, Charter of, 84

  Incense in Cupellation Furnaces, =472=

  Indications of Ore, =106=; =107=; =116=

  _Ingestores_ (_see_ Shovellers).

  India.
    Steel, 423
    Zinc, 409

  _Intervenium_, =51=; =50=

  Investment in Mines, =26-29=

  Iron, 420; 354; 111
    Cast, 420
    Censure of, =11=
    Indications of, =116=
    Malleable, 420
    Smelting, =420-426=
    Sulphur harmful to, =273=

  Iron Age, 420

  Iron Filings (_see also_ Iron-Scales), 221
    Use in assaying, =234=; =238=; =246=

  Iron Ore.
    Assaying of, =247=
    Smelting of, =420-426=

  Iron-rust, =116=; =474=; 1; 111

  Iron-scales, 221
    Flux, =234=
    Use in smelting gold, =398=
    Use in smelting silver, =400=
    Use in making nitric acid, =440=
    Use in parting gold from copper, =464=

  Iron-slag, 221
    As a flux, =234=; =235=

  Ironstone, =390=; 111

  Italians.
    Alluvial mining in Germany, =334=

  Italy.
    Mining formerly forbidden, =8=


  Jade, 114

  Japan.
    Steel, 423

  Jasper, 111; 2

  _Jaspis_, 114

  Jet, 34

  Jigging Sieve, =310=; 267; 283

  Joachimsthal, VI.
    First stamp-mill, 281
    Mining shares and profits, =91=; =92=

  _Juedenstein_ (_see_ _Lapis Judaicus_).

  Juices, 1; 47
    Agricola's theory, 46; 52
    From springs and streams, =33=
    Stone juice, 46; 49
    Tastes of, =34=

  Juices, Solidified.
    Agricola's view of, 1; 49
    Extraction of metals from, =350=
    Preparation of, =545=

  Julian Alps.
    Stamp-milling in, =319=

  Junctions (_see_ Veins, Intersections of).

  _Jurati_ (_see_ Jurors).

  Jurors, =22=; =92=; =96=; 78
    In English mining custom, 85
    Relations to Bergmeister, =95=; 77

  Justinian Code.
    Mines, 84


  _Kalchstein_ (_see_ Limestone).

  _Kammschale_, 127

  Kaolinite (_see_ Porcelain Clay).

  _Katzensilber_ (_see_ Mica).

  King.
    Deputy, =94=
    Right to a meer, =81=

  _Kinstock_ (_see_ Liquation Cakes, Exhausted).

  _Kis_ (_see_ Pyrites).

  Knockers (_see_ Gnomes).

  _Kobelt_ (_see_ Cobalt).

  Koelergang Vein, =42=

  Koenigsberg.
    Fire-setting, 119

  _Kupferglas ertz_ (_see_ Copper Glance).

  _Kupferschiefer_ (_see_ Copper Schists).

  Kuttenberg.
    Depths of shafts, 102


  Labour Condition in Mining Title, =92=; 83-85

  Lacedaemonians (_see_ Spartans).

  _Lachter_ (_see_ Fathom).

  Ladderways in Shafts, =124=; =212=

  Ladle for Bullion, =382=

  _Lapis aerarius_ (_see_ Copper Ore).

  _Lapis alabandicus_, 380

  _Lapis Judaicus_, =115=; 115

  _Lapis specularis_ (_see_ Gypsum).

  Laths (Lagging), 101

  La Tolfa.
    Alum manufacture, 565
    Discovery of, 570

  Laurion (Laurium), Mt. (_see_ Mt. Laurion, Mines of).

  Lautental, Liquation at, 491

  Law (_see_ Mining Law).

  Law-suits over Shares in Mines, =94=

  Lead, 354; 390; 110
    Censure of, =11=
    Cupellation, =464-483=
    Melting prior to liquation, =500=
    In liquation cakes, =505-506=; 505; 506
    Refining silver, =483-490=
    Smelting of ores, =388-392=; =400=
    Use in assaying, =232=; =239=; =242=; =244=; =249=; =251=
    Washing in sluices, =347=

  Lead-ash, =237=; 237; 221
    As a flux, =234=
    Use in parting gold from copper, =463=

  Lead Bath, =381=

  Lead-glass, 236

  Lead Granules, =239=; =463=; 221

  Leading (in liquation), =304=; =507=; =513=; 491; 492; 504
    Components of the charge, =505-509=

  Lead Ochre, 232; 110; 221

  Lead Ore.
    Assay methods, =245-246=
    Roasting, =275=
    Smelting in blast furnace, =390=; =408=

  Lease, in Australian Title, 77

  Leaves, Preparation of Bullion into, =444=

  Leberthal, 24

  Lees of _aqua_ which separates Gold from Silver, 234; 443; 221
    As a flux, =234=; =238=

  Lees of Vinegar (_see also_ Argol), 221
    As a flux, =234=; =236=; =243=; 234

  Lees of Wine (_see_ Argol).

  Lemnos, Island of, =31=

  Lemnian Earth, 31

  Leprosy of House Walls (_see_ Saltpetre).

  Level (_see also_ Drift), 101

  Level, Plummet (_see_ Plummet Level).

  Limestone, 114; 221
    As a flux, =236=; =390=

  Limonite, 111

  Limp, 267

  Linares.
    Hannibal's mines near, 42

  Lipari Islands.
    Alum from, 566

  Liquated Silver-lead (_see_ _Stannum_ _and_ Silver-lead).

  Liquation, =519-521=; 491; 519
    Ash-coloured copper from, =529=
    Buildings for, 491
    Furnace, =515-518=; 492
    Historical note on, 494
    Losses, 491; 539
    Nomenclature, 492

  Liquation Cakes, =505-509=; 492; 505; 506
    Enrichment of the lead, =512=; 512
    Extraction of silver from, 512
    From bye-products of liquation, =539-540=
    From copper bottoms, =512=; 512
    Proportion of lead in rich silver copper, =509=

  Liquation Cakes, Exhausted, =521-526=; =406=; 492; 520

  Liquation Slags, 509; 492; 541
    Furnaces for, =507=
    Treatment of, =541=

  Liquation Thorns, =522=; =539=; 492; 539; 540
    From cupellation, =543=; 543
    From "drying" copper residues, =529=

  Litharge (_see also_ Cupellation), =475=; =232-238=; 466; 476; 110; 222
    Use in reducing silver nitrate, =447=
    Use in smelting, =379=; =398=; =400=

  _Lithargyrum_ (_see_ Litharge).

  Lodestone, =115=; 111; 115; 2
    Compass, 57

  _Los Pozos de Anibal_, 42

  _Lotores_ (_see_ Washers).

  Lusitania.
    Gold alluvial, =347=
    Sluices for gold washing, =325=
    Tin smelting, =419=

  Lute, 1
    Preparation of for furnace linings, =375-376=

  Lydia.
    Mining law, 83
    The King's mines, 27

  Lye, =558=; 221; 233
    Use in making fluxes, =236=
    Use in parting, =463=


  _Magister Metallicorum_ (_see_ Bergmeister).

  _Magister Monetariorum_ (_see_ Master of the Mint).

  _Magnes_ (_see also_ Lodestone _and_ Manganese), =585=; 111; 115; 585

  Magnet, =247=
    Garlic, =39=

  _Magnetis_ (_see_ Mica).

  Magnetite, 111

  Malachite, 109; 221

  Maladies of Miners, =214-217=

  Maltha, 581

  Manager (_see_ Mine Manager).

  Manganese, 586; 354

  Mannsfeld Copper Slates, =126-127=; =279=; 127; 273

  Map-making, 129

  Marble, =115=; 2; 114

  Marcasite, 111; 112; 409

  _Marga_ (_see_ Marl).

  Marienberg, =XXXI=; VI.

  Marl, 114

  Marmelstein (_see_ Marble).

  _Marmor_ (_see_ Marble).

  _Marmor alabastrites_ (_see_ Alabaster).

  _Marmor glarea_, 114

  Massicot (_see also_ Lead Ochre), 110; 221; 232

  Master of the Horse, =81=

  Master of the Mint, =95=; 78

  Matte (_see_ Cakes of Melted Pyrites).

  Matte Smelting, =404-407=

  Measure (unit of mining area), =78=; 78

  Measures, 616-617; 78; 550

  Medicine.
    Knowledge necessary for miners, =3=

  _Medulla saxorum_ (_see_ Porcelain Clay).

  Meer, =77-89=
    Boundary stones, =87=
    On _vena cumulata_, =87=
    On _vena dilatata_, =86=

  Meissen.
    Dumps from mines, =312=

  _Melanteria_, =117=; 112; 573
    Indication of copper, =116=

  Melanterite, 111

  Melos, Island of, 566

  _Menning_ (_see_ Red-lead).

  _Mergel_ (_see_ Marl).

  Metals, 2; 44; 51
    Advantages and uses, =19=; =20=
    Necessity to man, =XXV=; =12-13=
    Not responsible for evil passions, =15=

  _Metreta_, 153

  Mexico.
    Patio process, 297

  Mica, 114

  Middle Ages, Mining Law of, 84

  Mills for Grinding Ore, =294-299=; 280

  Mimes (_see also_ Gnomes), 217

  Mine Captain, =26=; 77

  Mine Manager, =97=; =98=; 77; 78

  Mineral Kingdom, Agricola's Divisions of, 1

  Minerals, 594; 108; 48; 51
    Compound, 2; 51
    Mixed, 2; 51

  Miners, =1-4=; =25=; 78
    Duties and punishments, =100=; =22=
    Law (_see_ Mining Law).
    Litigation among, =21=
    Slaves as, =23=

  Mines.
    Abandonment of, =217=
    Conditions desirable, =30-33=
    Investments in, =26-29=
    Management of, =25=; =26=
    Names of, =42=

  Mines Royal, Company of, 283

  Mining (_see also_ Sett, Lease, Claim, Meer, _etc._).
    Criticisms of, =4-12=
    Harmless and honourable, =14=; =20=; =23=
    Methods of breaking ore, =117-118=
    Stoping, =125=

  Mining Clerk, =93=; =95=; =96=; 78

  Mining Companies (_see_ Companies, Mining).

  Mining Foreman, =98-99=; 78
    Frauds by, =21-22=

  Mining Law, 82-86
    Boundary stones, =87=
    Drainage requirements, =92-93=
    England, 84-86
    Europe, 84
    Forfeiture of title, =92-93=
    France, 84
    Greek and Roman, 83
    Middle Ages, 84-85
    Right of Overlord, Landowner, State and Miner, 82
    Tunnels, =88-89=

  Mining Prefect, =26=; =94=; 78

  Mining Rights (_see_ Mining Law _and_ Meer).

  Mining Terms, Old English, 77; 101

  Mining Tools, =149-153=
    Buckets for ore, =153-154=
    Buckets for water, =157=
    Trucks, =156=
    Wheelbarrows, =155=

  _Minium_, 111
    Quicksilver from, 433
    Red-lead, 232

  _Minium secundarium_ (_see_ Red-lead).

  Mispickel (_Mistpuckel_), 111

  _Misy_ (the mineral), 573; 111; 403
    An indication of copper, =116=
    Use in parting gold and silver, 459

  _Mitlere und obere offenbrueche_ (_see_ Furnace Accretions).

  _Modius_, 617; 405

  Moglitz.
    Tin working, =318=

  Moil, 150

  _Molybdaena_, 110; 221; 476; 400; 408
    Term for lead carbonates, 400; 408

  Molybdenite, 477

  _Monetarius_ (_see_ Coiners).

  Money, Assaying of, =251-252=

  Morano Glass Factories, =592=

  Moravia.
    Cupellation, =483=
    Stamp-milling, =321=
    Washing gold ore, =324=

  Mordants, 569

  Mortar-box, =279-280=; =312=; =319=; 267

  Mountains.
    Formation of, =595=

  Mt. Bermius.
    Gold Mines of, =26=; 27

  Mt. Laurion, Mines of, =27=; 27-29; 391
    Crushing and concentration of ores, 281
    Cupellation, 465
    Mining law, 83
    Smelting appliances, 355
    Xenophon on, =6=

  Mt. Sinai.
    Ancient copper smelting, 355; 402

  Muffle Furnaces, =224-228=; =239=

  Muffles, =227=; =239=; 222
    Refining silver, =489-490=

  Muehlberg, Battle of, X.

  _Murrhina_ (_see_ Chalcedony).

  Muskets, =11=

  Mycenae.
    Copper, 402
    Silver-lead smelting, 391


  Names of Mines, =42=

  Naphtha, 581

  Native Copper, 109

  Native Iron, 111

  Native Minerals, =107=

  Native Silver, =269=; 109

  Natron (_see_ _Nitrum_).

  Neolithic Furnaces, 355

  Neusohl, Method of Screening Ore, =290=

  Newbottle Abbey, 35

  Nitocris, Bridge of, 391

  Nitric Acid (_see also_ _Aqua valens_), =439-443=; 460; 439; 354
    Assay parting gold and silver, =248=
    Testing silver regulus with, =449=
    Use in cleaning gold dust, =396=

  _Nitrum_ (_see also_ Soda), 558; 110

  Nomenclature, I; 267
    Mining law, 77; 78
    Mining officials, 77; 78

  _Norici_, 388
    Conveyance of ore, =169=

  Normans.
    Mining Law in England, 85

  Notary, =94=;   78

  Nubia.
    Early gold-mining, 399

  Nuremberg, Scale of Weights, =263=


  _Obolus_, 25

  _Ochra nativa_, 111

  Ochre Yellow, 111

  _Offenbrueche_ (_see_ Furnace Accretions).

  Olynthus.
    Betrayal to Philip of Macedon, =9=

  Operculum, =441=; 222

  Orbis, =141=; 137

  Ore (_see various metals_, Assaying, Mining, _etc._).

  Ore Channels (_see_ Canales).

  Ore Deposits, Theory of, XIII; 43-53

  Ore Dressing, =267-351=
    Burning, =273=
    Hand spalling, =271-272=
    Sorting, =268-271=

  _Orguia_, =78=; 78; 617

  _Orichalcum_ (_see_ _Aurichalcum_).

  Orpiment, 111; 1; 222
    Colour of fumes, =235=
    Harmful to metals, =273=
    Indication of gold, etc., =116=
    Roasted from ore, =273=
    Use in assaying, =237=

  Outcrops, 68; 43

  Ox-blood in Salt Making, =552=


  Pactolus, Gold Sands of, 27

  Park's Process, 465

  Parting Gold from Copper, =462-464=

  Parting Gold from Silver, =443-460=; 458-463
    Antimony sulphide, =451-452=; 451-452; 461
    Cementation, =453-457=; =453-454=; =458=
    Chlorine gas, 458; 462
    Electrolysis, 458; 462
    Nitric acid, =443-447=; 443; 447; 460
    Nitric acid (in assaying), =247-249=
    Sulphur and copper, =448-451=; 448; 461
    Sulphuric acid, 458; 462

  Partitions, 493

  Passau, Peace of, IX.

  _Passus_, 616; 78

  Patio Process, 297-298

  Pattinson's Process, 465

  Peak, The (_see_ High Peak).

  _Pentremites_, 115

  Pergamum.
    Brazen ox of, =11=
    Mines near, =26=; 27

  Peripatetics, XII.
    Theory of ore deposits, =47=; 44
    View of wealth, =18=

  Persians.
    Ancient mining law, 83

  _Pes_, 616; 78

  Pestles, =231=; =483=

  Petroleum, 581-582

  Phalaris, Brazen Bull of, =11=

  Philosophy.
    Knowledge necessary for miners, =3=

  Phoenicians.
    Copper and bronze, 402
    In Thasos, 24
    Tin, 411-412

  Picks, =152-153=

  _Pickschiefer_ (_see_ Ash-coloured Copper).

  Placer Mining, =321-348=

  _Pleigeel_ (_see_ Lead Ochre).

  _Pleiweis_ (_see_ White-lead).

  Pleygang Vein, =42=

  _Plumbago_, 110

  _Plumbum candidum_, 110; 3; 473

  _Plumbum cinereum_, 111; 3

  _Plumbum nigrum lutei coloris_, 110; 3

  Plummet Level.
    Standing, =143=; 137
    Suspended, =145=; =146=; 137

  Pockets in Alluvial Sluices, =322-330=

  Poisonous Fumes (_see_ Fumes).

  Poland.
    Cupellation, =483=
    Lead ore washing, =347=
    Lead smelting, =392=

  _Poletae_, Tablets of the, 83

  Poling Copper, =531-538=; 535-536

  Pompeiopolis.
    Arsenic mine at, 111

  _Pompholyx_, 394; 113-114; 403
    From copper refinings, =538=
    From cupellation, =476=
    From dust-chambers, =394=
    From roasting ore, =278=
    Poisonous, =214=; 215
    Used for brass making, 410

  Porcelain Clay, 115

  Potash, =558-559=; 558; 233; 220
    In _Sal artificiosus_, =463=

  Pottery, Egyptian, 391

  Potosi, 298

  Pozos de Anibal, Los, 42

  _Pous_, 617; 78

  _Praefectus cuniculi_, 78

  _Praefectus fodinae_ (_see_ Mine Manager).

  _Praefectus metallorum_ (_see_ Mining Prefect).

  _Praeses cuniculi_, 78

  _Praeses fodinae_ (_see_ Mining Foreman).

  Precious and Base Metals, 439

  Primgap, 80

  _Procurator metallorum_, 83

  Prospecting, =35=

  Proustite, 108

  Pumps, =171-200=; 149
    Chain, =171-175=
    Rag and chain, =188-200=
    Suction, =175-188=

  _Purgator argenti_ (_see_ Silver Refiner).

  Purser, 77

  Puteoli, =501=

  Pyrargyrite, 108

  _Pyriten argentum_, 408

  Pyrites (_see also_ Cakes of Melted Pyrites), 51; 111; 112; 1
    As a flux, =234=
    Assay for gold, =243=
    In tin concentrates, =348=
    Latin and German terms, 222
    Roasting, =273-274=
    Roasting cakes of, =349-351=
    Smelting for gold and silver, =399=; =401=
    Used in making vitriol, 578

  _Pyrites aerosus_ (_see_ Copper Pyrites).

  _Pyrites aurei coloris_ (_see_ Copper Pyrites).


  Quartz (_see also_ Stones which easily melt), 114
    As a flux, 380
    An indication of ore, =116=
    Material of glass, 380
    Silver ore, =113=
    Smelting of, =401=

  _Quarzum_ (_see_ Quartz).

  Quertze, 380

  Quicksilver, 432; 2; 354; 110
    Amalgamation of gilt objects, =461=
    Amalgamation of gold dust, =396=
    Amalgamation of gold ores, =297=; 297
    Assaying methods, =247=
    Ore, 426-432
    Use in assaying gold ore, =243=


  Rag and Chain Pumps, =188-200=

  Rake Veins, 101

  Rammelsberg.
    Collapse of mines, =216=
    Discovery, 37
    Early vitriol making, 572

  _Rauchstein_, 127

  Realgar, 1; 111; 222
    Colour of fumes, =235=
    Harmful to metals, =273=
    Indication of ore, =116=
    Roasted from ore, =273=

  _Rederstein_ (_see_ _Trochitis_).

  Red-lead, 232; 110; 222
    Use in parting gold from copper, =463=
    Use in parting gold from silver, =459=

  Refined Salt, =454=; =463=; 233

  Refinery for Silver and Copper, =491-498=

  Refining Gold from Copper, =462-464=

  Refining Gold from Silver, =443-458=

  Refining-hearth, 492

  Refining Silver, =483-490=; 465; 484

  Refining Silver from Lead, =464=

  Reformation, The, V; VIII.

  Re-opening of Old Mines, =217=

  Revival of Learning.
    Agricola's position in, XIII.

  Reward Lease, in Australian Law, 77

  Rhaetia, 388

  Rhaetian Alps.
    Stamp milling in, =319=

  Ring-fire, =448=

  Rio Tinto Mines.
    Roman methods of smelting, 405
    Roman water-wheels, 149

  Risks of Mining, =28-29=

  Rither (a horse), 101

  Roasted Copper, =233=; 233; 222

  Roasting, =273-279=; 267
    Heap roasting, =274-275=
    In furnaces, =276=
    Mattes, =349-351=
    Prior to assaying, =231=

  Rocks, =119=; 2

  Rock-salt, =548=; 222
    Use in cementation, =454=

  Roman Alum, 565

  Romans.
    Amalgamation, 297
    Antimony, 428
    Brass making, 410
    Companies, 90
    Copper smelting, 404-405
    Mining law, 83
    Minium Company, 232
    Quicksilver, 433
    Roasting, 267
    Silver-lead smelting, 392
    Washing of ore, 281

  Rosette Copper, =538=; 535

  _Rosgeel_ (_see_ Realgar).

  Ruby Copper, 109; 402

  Ruby Silver, 51; 108
    Assaying of, =244=
    Cupellation, =473=

  _Rudis_ Ores, 108

  Rust (_see_ Iron-rust).


  Sabines, =9=

  _Saigerdoerner_ (_see_ Liquation Thorns).

  _Saigerwerk_ (_see_ _Stannum_).

  _Salamander har_ (_see_ Asbestos).

  Salamis, Battle of, 27

  Sal-ammoniac, =560=; 560; 222
    In cements for parting gold and silver, =454-457=
    In making _aqua valens_, =441=
    Uses in cupellation, =474=
    Uses in making _aqua regia_, 460
    Uses in parting gold from copper, =463=

  _Sal artificiosus_, =236=; =463=; 236
    In assaying, =242=
    As a flux, =234=

  Salt, =545=; =556=; 546; 233; 222
    As a flux, =234-238=
    Pans, =545=; =546=
    Solidified juice, 1
    Use in cementation, =454=; 454
    Use in parting gold from copper, =463=; =464=
    Use in smelting ores, =396=; =400=
    Wells, =546-547=

  Salt made from Ashes of Musk Ivy, 560; 233

  _Sal torrefactus_, =242=; 222; 233

  _Sal tostus_, =233=; 233; 222

  Saltpetre, =561-564=; 561; 562; 222
    As a flux, =233=; =236-238=; =245=; =247=
    In smelting gold concentrates, =398=
    Uses in cementation, =454=; 454
    Uses in making nitric acid, =439=; =440=; =447=; =454=
    Uses in melting silver nitrate, =447=

  Sampling Copper Bullion, =249=

  Sand, =117=

  _Sandaraca_ (_see_ Realgar).

  Sandiver (_see_ Glass-galls).

  _Sarda_ (_see_ Carnelian).

  Saxony.
    High Peak customs from, 77; 85
    Political state in Agricola's time, VIII; IX.
    Reformation, IX.

  _Saxum calcis_ (_see_ Limestone).

  Scales of Fineness, 253; 617

  Scapte-Hyle, Mines of, 23

  Schemnitz.
    Age of mines, =5=
    Gunpowder for blasting, 119
    Pumps, =194=

  Schist, 222

  _Schistos_ (_see_ Ironstone).

  Schlackenwald.
    Ore washing, =304=

  Schmalkalden League, IX.

  Schmalkalden War, IX; X.

  Schneeberg, =XXXI=; VI.
    Cobalt, =435=
    Depth of shafts, 102
    Ore stamping, 281
    Shares, =91=
    St. George mine, =91=; 74; 75

  _Schwartz-atrament_ (_see_ _Melanteria_ _and_ _Sory_).

  Scorification Assay, =239=

  Scorifier, =228=; =230=; 222
    Assays in, =238=; =239=

  Screening Ore (_see_ Sifting Ore).

  Screens (_see also_ Screening), 267
    In stamp-mill, =315=

  _Scriba fodinarum_ (_see_ Mining Clerk).

  _Scriba magistri metallicorum_ (_see_ Bergmeister's Clerk).

  _Scriba partium_ (_see_ Share Clerk).

  Scum of Lead from Cupellation, =475=

  Scythians.
    Wealth condemned, =9=; =15=

  Seams in the Rocks, =72=; 43; 47
    Indications of ore, =67=; =107=

  Sea-Water, Salt from, =545-546=

  _Sesterce_, 448

  Sett, 77

  Settling Pits, =316=; 267

  Shaft-houses, =102=

  Shafts, =102-107=; =122-124=
    Surveys of, =129-135=
    _Venae cumulatae_, =128=

  Shakes, 101

  Share Clerk, =97=; =93=; 78

  Share in Mines (_see_ Companies, Mining).

  Shears for Cutting Native Silver, =269=

  Shift, =99=; 92

  Shoes (stamp), =285-286=; 267

  Shovellers, =153=; =169=; 78

  _Sideritis_ (_see_ Lodestone).

  _Siegelstein_ (_see_ Lodestone).

  Sieves.
    For charcoal, =375=
    For crushed ore, =287-293=; =341=

  Sifting Ore, =287-293=

  _Signator publicus_ (_see_ Notary).

  _Silberweis_ (_see_ Mica).

  _Silex_, 114; 118

  Silver (_see also_ Assaying, Liquation, Parting, Refining,
    _etc._), 390; 354; 108
    Amalgamation, 297; 300
    Assaying, =248-251=
    Cupellation, =464-483=; =241=
    "Drying" copper residues from liquation, 529
    Enrichment in copper bottoms, =510=; 510
    Exhausted liquation cakes, 524
    Indicated by bismuth, etc., =116=
    Liquation, =505-507=; 506; 509; 512
    Parting from gold (_see_ Parting Gold and Silver).
    Parting from iron, =544=; 544
    Precipitation from solution in copper bowl, =444=
    Refining, =483-490=; 465; 484
    Smelting of ores, =381-382=; =386=; =388=; =390=; =400=; =402=
    Use in clarification of nitric acid, =443=; 443

  Silver, Ruby (_see_ Ruby Silver).

  Silver Glance, 108
    Assaying, =244=
    Cupellation, =473=
    Dressing, =269=

  Silver-Lead Alloy (_see_ _Stannum_, _etc._).

  Silver Ores, =108=; 108
    Assaying, =242-244=
    Assaying cupriferous ores, =245=
    Fluxes required in assaying, =235=
    Smelting cupriferous ores, =404-407=

  Silver-Plating, 460

  Silver Refiner, =95=; 78

  Silver Refining (_see_ Refining).

  Silver Veins, =117=

  Singing by Miners, =118=

  Sintering Concentrates, =401=

  Slags (_see also_ Liquation Slags), 222
    From blast furnace, =379=; =381=
    From liquation, 491; 492; 523

  Slaves as Miners, =23=; 83
    In Greek mines, =25=; 25; 28

  Slough (tunnel), 101

  Sluices, =319=; =322-348=

  Smallite, 113

  Smalt, 112

  _Smega_, 404

  Smelters, 78

  Smelting (_see also various metals_), =379-390=; 353-355
    Assaying compared, =220=
    Building for, =355-361=
    Objects of, =353=

  _Smirgel_ (_see_ Emery).

  _Smiris_ (_see_ Emery).

  Smyrna.
    Mines near, 27

  Snake-Bites, 31

  Soda (_see also_ _Nitrum_), =558=; =559=; 233; 222
    As a flux, =233=; =234=
    Historical notes, 558; 354
    Solidified juice, 1

  Sole, 101

  Solidified Juices (_see_ Juices, Solidified).

  _Solifuga_, =216=; 216

  Sorters, 78

  Sorting Ore, =268-271=

  _Sory_, 112; 403; 573

  Sows, =376=; =386=; 376

  Spain (_see also_ Lusitania).
    Ancient silver-lead mines, 149; 392
    Ancient silver mines of Carthage, =27=
    Ancient tin mines, 411-412

  Spalling Ore, =271-272=

  _Spangen_ (_see_ _Trochitis_).

  _Spanschgruen_ (_see_ Verdigris).

  Spartans.
    Gold and silver forbidden, =9=; =15=
    Interference with Athenian mines, 27

  Spat (_see_ Heavy Spar).

  Spelter, 409

  Sphalerite, 113

  _Spiauter_, 409

  _Spiesglas_ (_see_ _Stibium_).

  Spines of Fishes for Cupels, =230=

  _Spodos_, =538=; 394; 113; 114

  _Spuma argenti_ (_see_ Litharge).

  Staffordshire.
    First pumping engine, 149

  Stalagmites, 114

  Stall Roasting, =350-351=

  Stamp, 267
    For breaking copper cakes, =501-503=
    For crushing crucible lining, =373-375=

  Stamping Refined Silver, =489=

  Stamp-mill, =279-287=; 281-282; 267
    Wet ore, =312-314=; =319-321=

  Standing Plummet Level (_see_ Plummet Level).

  Stannaries, 85

  _Stannum_, 473; 2; 384; 492

  Steel, =423-426=; 422-423; 354

  _Steiger_, 77

  _Steinmarck_ (_see_ Porcelain Clay).

  Stemple (stull), 101

  Stephanite, 109

  Sternen Mine, =92=; 75

  Steward (of High Peak mines), 77

  St. George Mine (Schneeberg), =91=; 74; 75

  _Stibium_ (_see also_ Antimony _and_ Antimony Sulphide), 110; 428; 2; 221
    Flux to be added to, =235=
    In assaying, =237-239=
    In cementation, =458-460=
    Indication of silver, =116=
    In making nitric acid, =440=
    In parting gold and silver, =451-452=; =459=
    In parting gold from copper, =464=
    In treatment of gold concentrates, =396=; =397=

  Stibnite, 428; 451

  St. Lorentz Mine, =74=; =92=

  Stockwerke (_see_ _Vena cumulata_).

  Stoics.
    Views on wealth, =18=

  _Stomoma_, =423=

  Stone Juice, 46; 49

  Stones.
    Agricola's view of, 2; 46; 49
    Various orders of fusibility, =380=

  "Stones which Easily Melt" (_see also_ Quartz), 380; 222
    As a flux, =233=; =236=; 233
    In making nitric acid, =440=
    In smelting, =379=; =380=; =390=
    Smelting of, =401=

  Stool (of a drift), 101

  Stope, =126=

  Stoping, =125=
    _Venae cumulatae_, =128=
    _Venae dilatatae_, =126=; =127=

  Strake, =303-310=; 267; 282
    Canvas, =307-310=; =314=; =316=; 267
    Egyptians, 280
    Greeks, 281
    Short, =306-307=; 267
    Washing tin concentrates, =341-343=

  Strata, =126=

  Streaming, =316-318=

  Stringers, =70=; 43; 47; 70
    Indication of ore, =106=
    Mining method, =128=

  Styria, =388=

  Subterranean Heat, 46; 595

  Suction Pumps, =175-188=

  Sulphides, 267; 355

  Sulphur, =578-581=; 579; 222
    Colour of fumes, =235=
    Harmful to metals, =273=
    In assaying, =235-238=
    In parting gold from copper, =463=; 462
    In parting gold from silver, =448-451=; 448; 461
    In smelting gold dust, =396=
    Roasted from ores, =273=; =276=
    Solidified juice, 1

  Sulphur "not exposed to the fire," =458=; =463=; 579

  Surveyor's Field, =137=; =144=; 142

  Surveying, =128-148=; 129
    Necessary for miners, =4=
    Rod, =137-138=

  Suspended Plummet Level (_see_ Plummet Level).

  Swiss Compass, =145=; 137

  Swiss Surveyors, =145=

  _Symposium_, =91=


  Tap-hole, =378=; =386=

  Tappets, =282=; =319=; 267

  Tapping-bar, =381=

  Tarshish, Tin Trade, 412

  Tartar (Cream of), 220; 234

  _Tectum_ (Hangingwall), 101

  _Terra sigillata_ (_see_ Lemnian Earth).

  "Tests", refining silver in, =483-490=; 465; 484

  _Thaler_, 92

  Thasos, Mines of, =23=; =95=; 23

  _Theamedes_, 115

  Theodosian Code.
    Mines, 84

  Thorns (_see_ Liquation Thorns).

  Thuringia.
    Roasting pyrites, =276=
    Sluices of gold washing, =327=

  Tigna (Wall plate), 101

  Timbering.
    Of ladderways and shafts, =122=; =123=; =124=
    Of stopes, =126=
    Of tunnels and drifts, =124-125=

  Tin, 411-413; 354; 110
    Alluvial mining, =336-340=
    Assaying ore, =246=
    Assaying for silver, =251=
    Colour of fumes, =235=
    Concentrates, =340-342=; =348-349=
    Cornish treatment, 282
    Refining, =418-419=
    Smelting, =411-420=
    Stamp-milling, =312-317=
    Streaming, =316-318=
    Washing, =298=; =302=; =304=

  _Tincar_ or _Tincal_ (_see_ Borax).

  Tithe Gatherer, =81=; =95=; =98=; 78

  Tithe on Metals, =81=; 82

  _Toden Kopff_, 235

  _Tofstein_ (_see_ _Tophus_).

  Tolfa, La (_see_ La Tolfa).

  Tools, =149-153=

  _Topfstein_ (_see_ _Tophus_).

  _Tophus_, 233; 114; 222
    As a flux, =233=; =237=; =390=

  Tortures.
    With metals, =11=
    Without metals, =17=

  Touch-needles, =253-260=; 253

  Touchstone, =252-253=; 252; 354; 458; 222
    Mineral, 114
    Uses, =243=; =248=; =447=

  Trade-routes.
    Salt-deposits influence on, 546

  Transport of Ore, =168-169=

  Trent, Bishop of.
    Charter (1185), 84

  Triangles in Surveying, =129-137=

  Tripoli, 115

  _Trochitis_, =115=; 115

  Trolley, =480=; =500=; =514=

  Troy.
    Lead found in, 391

  Troy Weights, 616; 617; 242

  Trucks, =156=

  Tunnels, =102=; 101
    Law, =88-93=
    Surveys of, =130-141=
    Timbering, =124=

  Turin Papyrus, 129; 399

  Turn (winze), 101

  _Tuteneque_, 409

  _Tuttanego_, 409

  Tutty, 394

  Twitches of the Vein, 101

  Twyer, 376

  Tye, 267

  Type.
    _Stibium_ used for, 2; 429

  Tyrants.
    Inimical to miners, =32=

  Tyrolese.
    Smelting, =388=; =404=


  Ulcers, =214=; 31

  _Uncia_ (length), =78=; 616; 78

  _Uncia_ (weight), 616; 242

  Undercurrents (_see_ Sluices).

  United States.
    Apex law, 82


  _Vectiarii_ (_see_ Windlass Men).

  Veins, =43=; =64-69=; =106-107=; 47
    Barren, =72=; =107=
    Direction of, =54-58=
    Drusy, =72=; =73=; =107=
    Hardness variable, =117=
    Indications, =35-38=
    Intersections of, =65=; =66=; =67=; =106=; =107=

  _Vena_.
    Use of term, 43; 47

  _Vena cumulata_, =46=; =49=; =70=; 43; 47
    Mining method, =128=
    Mining rights, =87=

  _Vena dilatata_, =41=; =45=; =53=; =60-61=; 43; 47
    Junctions with _vena profunda_, =67=; =68=
    Mining method, =126-127=
    Mining rights, =83-86=
    Washing lead ore from, =347=

  _Vena profunda_, =44=; =51=; =60=; =62=; =63=; =68=; =69=; 43; 47
    Cross veins, =65=
    Functions, =65=; =66=; =67=; =68=
    Mining rights, =79-83=

  Venetian Glass, 222
    Factories, =592=
    In assaying, =238=; =245=; =246=
    In cupellation, =474=

  Venice.
    Glass-factories, =592=
    Parting with nitric acid, 461
    Scale of weights, =263=

  Ventilation, =200-212=; =121=
    With bellows, =207-210=
    With fans, =203-207=
    With linen cloths, =210=
    With windsails, =200-203=

  Verdigris, 440; 1; 110; 222
    In cementation, =454=; =457=
    Indication of ore, =116=
    In making nitric acid, =440=
    In parting gold from copper, =464=

  Vermilion.
    Adulteration with red-lead, 232
    Poisonous, =215=

  Villacense Lead, =239=; 239

  Vinegar.
    Use in breaking rocks, =119=; 118
    Use in cleansing quicksilver, =426=
    Use in roasting matte, =349=
    Use in softening ore, =231=

  _Virgula divina_ (_see_ Divining Rod).

  Vitriol, =571=; 572; 403; 222; 1
    In assaying, =237-238=
    In cementation, =454=; 454
    Indication of copper, =116=
    In making nitric acid, =439-440=
    In roasted ores, =350=
    In _sal artificiosus_, =463=
    Native, 111
    Native blue, 109
    Native white, 113
    Red, 274
    White, 454

  Volcanic Eruptions, 595


  Washers, 78

  Washing Ore (_see also_ Concentration, Screening Ore, _etc._), =300-310=

  Water-Bags, =157-159=; =198=

  Water-Buckets, =157-158=

  Water-Wheels, =187=; =283=; =286=; =319=

  Water-Tank, under Blast Furnaces, =356-357=

  Wealth, =7-20=

  Wedges, =150=

  Weights, =260-264=; 616-617; 242; 253

  _Weisser Kis_, 111

  _Werckschuh_, 617; 78

  Westphalia.
    Smelting lead ore, =391=
    Spalling ore, =272=

  Wheelbarrows, =154=

  Whims, =164-167=

  White-Lead, 440; 354; 110; 232

  White Schist, =234=; =390=; 234; 222

  Winding Appliances (_see_ Hauling Appliances).

  Windlasses, =160=; =171=; 149

  Windlass Men, =160=; 78

  Winds.
    Greek and Roman names, =58=
    Sailors' names, =59=; =60=

  Winds (winze), 101

  Windsails, =200-203=

  Winzes, 102

  Wittenberg, Capitulation of, IX.

  Wizards.
    Divining rods, =40=

  Workmen, =98=; =100=

  Woughs, 101


  _Zaffre_, 112

  Zeitz, XI.

  Zinc (_see also_ _Cadmia_ _and_ Cobalt).
    Historical notes, 408-410; 354
    Minerals, 112-113

  Zinck (_see_ Zinc).

  Zinc Oxides, 113; 354

  Zinc Sulphate (_see_ Vitriol).

  _Zincum_ (_see_ Zinc).

  _Zoll_, 617; 78

  Zwickau, VI.

  _Zwitter_, 110




INDEX TO PERSONS AND AUTHORITIES.

NOTE.--The numbers in heavy type refer to the Text; those in plain type
to the Footnotes, Appendices, etc.


  Acosta, Joseph De, 298

  Aeschylus.
    Amber, 35

  Aesculapius.
    Love of gold, =9=

  Africanus (alchemist), =XXVII=; XXVIII

  Agatharchides.
    Cupellation, 465
    Egyptian gold mining, 279; 391; 399
    Fire-setting, 118

  Agathocles.
    Money, =21=

  Agathodaemon (alchemist), =XXVII=; XXVIII

  Agricola, Daniel, 606

  Agricola, Georg (a preacher at Freiberg), 606

  Agricola, Georgius.
    Assaying, 220
    Biography, V-XVI
    Founder of Science, XIV
    Geologist, XII; 46; 53
    Interest in _Gottsgaab_ mine, VII; 74
    Mineralogist, XII; 108; 594
    Paracelsus compared with, XIV
    Real name, V
    Works, Appendix A
      See also:
        _Bermannus._
        _De Animantibus._
        _De Natura eorum_, etc.
        _De Natura Fossilium._
        _De Ortu et Causis._
        _De Peste._
        _De Precio Metallorum._
        _De Re Metallica._
        _De Veteribus Metallis._
        Etc.

  Agricola, Rudolph, 606

  Albert the Brave, Duke of Meissen, VIII

  Albertus Magnus (Albert von Bollstadt), XXX; 609
    Alluvial gold, =76=
    Cementation, 460
    Metallic arsenic, 111
    Metals, 44
    Saltpetre, 562
    Zinc, 409

  Albinus, Petrus, V; 599
    Cuntz von Glueck, 24

  Alpinus, Prosper, 559

  Alyattes, King of Lydia.
    Mines owned by, =26=; 27

  American Institute of Mining Engineers, 38; 53

  Anacharsis.
    Invention of bellows, 362

  Anacreon of Teos.
    Money despised by, =9=; =15=

  Anaxagoras.
    Money despised by, =15=

  Anna, Daughter of Agricola, VII

  Anna, Wife of Agricola, VII

  Antiphanes.
    On wealth, =19=

  Apollodorus, 26

  Apulejus (alchemist), =XXVII=; XXIX

  Archimedes.
    King Hiero's crown, =247=
    Machines, 149

  Ardaillon, Edouard.
    Mt. Laurion, 28; 281; 391

  Aristippus.
    Gold, =9=; =14=

  Aristodemus.
    Money, =8=

  Aristotle, XII; 607
    Amber, 35
    Athenian mines, 27; 83
    Burning springs, 583
    Coal, 34
    Cupellation, 465
    Distillation, 441
    Lodestone, 115
    Nitrum, 558
    Ores of brass, 410
    Quicksilver, 432
    Silver from forest fires, 36
    Theory of ore deposits, 44
    Wealth of, =15=

  Arnold de Villa Nova. (_see_ Villa Nova, Arnold de).

  Athenaeus.
    Silver from forest fires, 36

  Augurellus, Johannes Aurelius (alchemist), =XXVII=; XXX

  Augustinus Pantheus (alchemist), =XXVII=

  Augustus, Elector of Saxony, =IX=
    Dedication of _De Re Metallica_, =XXV=
    Letter to Agricola, =XV=

  Avicenna, XXX; 608


  Bacon, Roger, XXX; 609
    Saltpetre, 460; 562

  Badoarius, Franciscus, =XXVII=

  Balboa, V. N. de, V

  Ballon, Peter, 559

  Barba, Alonso, 300; 1

  Barbarus, Hermolaus, =XXVII=

  Barrett, W. F., 38

  Becher, J. J., 53

  Bechius, Philip, XV

  Beckmann, Johann.
    _Alumen_, 565
    Amalgamation, 297
    _Nitrum_, 559
    Parting with nitric acid, 461
    Stamp-mills, 281
    _Stannum_, 473
    Tin, 412

  _Bergbuechlein_ (_see_ _Nuetzlich Bergbuechlin_).

  _Bergwerks lexicon_, 37; 80; 81

  Berman, Lorenz, VI; 597

  _Bermannus_, 596; 599; VI
    Arsenical minerals, 111
    Bismuth, 3; 433
    _Cadmia_, 113
    Cobalt, 112
    Fluorspar, 381
    _Molybdaena_, 477
    Schist, 234
    Shafts, 102
    Zinc, 409

  Berthelot, M. P. E., 429; 609

  Berthier, 492

  Bias of Priene.
    Wealth, =8=; =14=

  Biringuccio, Vannuccio, 614
    Agricola indebted to, =XXVII=
    Amalgamation of silver ores, 297
    Assaying, 220
    Assay ton, 242
    Brass making, 410
    Clarifying nitric acid, 443
    Copper refining, 536
    Copper smelting, 405
    Cupellation, 466
    Liquation, 494
    Manganese, 586
    Parting precious metals, 451; 461; 462
    Roasting, 267
    Steel making, 420
    _Zaffre_, 112

  Boeckh, August, 28

  Boerhaave, Hermann, XXIX

  Borlase, W. C.
    Bronze celts, 411

  Borlase, William.
    Cornish miners in Germany, 283

  Born, Ignaz Edler von, 300

  Boussingault, J. B., 454

  Boyle, Robert.
    Divining rod, 38

  Brough, Bennett, 129

  Bruce, J. C., 392

  Brunswick, Duke Henry of (_see_ Henry, Duke of Brunswick).

  Budaeus, William (Guillaume Bude), 461; 606


  Cadmus, 27

  Calbus (_see also_ _Nuetzlich Bergbuechlin_), 610; =XXVI=; XXVII
    Alluvial gold, =75=

  Caligula.
    Gold from _auripigmentum_, 111

  Callides (alchemist), =XXVII=; XXVIII

  Callimachus.
    On wealth, =19=

  Camerarius, =VIII=

  Canides (alchemist), =XXVII=; XXVIII

  Carew, Richard.
    Cornish mining law, 85
    Cornish ore-dressing, 282

  Carlyle, W. A.
    Ancient Rio Tinto smelting, 405

  Carne, Joseph.
    Cornish cardinal points, 57

  Casibrotius, Leonardus, VI

  _Castigationes in Hippocratem et Galenum_, 605

  Castro, John de, 570

  Chabas, F. J., 129

  Chaloner, Thomas, 570

  Chanes (alchemist), =XXVII=; XXVIII

  Charles V. of Spain, =IX=
    Agricola sent on mission to, =X=

  Chevreul, M. E., 38

  _Chronik der Stadt Freiberg_, 606

  Cicero.
    Divining rod, 38
    Wealth of, =15=

  Cincinnatus L. Quintius, =23=

  Circe.
    Magic rod, =40=

  Cleopatra.
    As an alchemist, =XXVII=; XXIX

  Collins, A. L. 119

  Columbus, Christopher, V

  Columella, Moderatus, =XXV=; =XXVI=

  Comerius, =XXVII=; XXIX

  _Commentariorum ... Libri VI._, 604

  Conrad (Graf Cuntz von Glueck), =23=; 24

  Corduba, Don Juan De, 300

  Cortes, Hernando, =V=

  Cramer, John, 236

  Crassus, Marcus.
    Love of gold, =9=

  Crates, the Theban.
    Money despised by, =15=

  Croesus, King of Lydia.
    Mines owned by, =26=; 27

  Ctesias.
    Divining rod, 38

  Ctesibius.
    Machines, 149

  Curio, Claudius.
    Love of gold, =9=

  Curius, Marcus.
    Gold of Samnites, =9=; =15=


  Dana, J. D., 108
    Alum, 566
    Copiapite, 574
    Emery, 115
    Lemnian earth, 31
    Minerals of Agricola, 594
    Zinc vitriol, 572

  Danae.
    Jove and, =10=

  D'Arcet, J.
    Parting with sulphuric acid, 462

  Day, St. John V.
    Ancient steel making, 423

  _De Animantibus Subterraneis_, 597; =VII=
    Editions, 600
    Gnomes, =217=; 217

  _De Bello adversus Turcam_, 605

  _De Inventione Dialectica_, 606

  _De Jure et Legibus Metallicis_, =100=; 604

  _De Medicatis Fontibus_, 605

  _De Mensuris et Ponderibus_, 597
    Editions, 599
    Weights and measures, =263=; 78

  _De Metallis et Machinis_, 604

  Democritus (alchemist), =XXVII=; XXVIII

  Demosthenes.
    Mt. Laurion mines, 27; 83

  _De Natura eorum quae Effluunt ex Terra_, 598; =32=
    Dedication, VII
    Editions, 600

  _De Natura Fossilium_, 594; 600; III; XII
    Alum, 565
    Amber, 35
    Antimony, 429
    Argol, 234
    Arsenical minerals, 111
    Asbestos, 440
    Bismuth, 110
    Bitumen, 581
    Borax, 560
    Brass making, 410
    _Cadmia_, 113
    _Caldarium_ copper, 511
    Camphor, 238
    _Chrysocolla_, 584
    Coal, 35
    Cobalt, 112
    Copper flowers, 539; 233
    Copper scales, 233
    Crinoid stems, 115
    Emery, 115
    Fluorspar, 380
    Goslar ores, 273
    Goslar smelting, 408
    Iron ores, 111
    Iron smelting, 420
    Jet, 34
    _Lapis judaicus_, 115
    Lead minerals, 110
    Mannsfeld ores, 273
    _Melanteria_, 573
    Mineral Kingdom, 1
    _Misy_, 573
    _Molybdaena_, 476
    Native metals, 108
    Petroleum, 581
    _Pompholyx_, 114; 278
    Pyrites, 112
    Quicksilver, 110
    _Rudis_ minerals, 108
    Sal-ammoniac, 560
    Silver glance, 109
    _Sory_, 573
    _Spodos_, 114
    _Stannum_, 473
    Stones which easily melt, 380
    Sulphur, 578
    _Tophus_, 233
    Touchstone, 253
    White schist, 234
    Zinc, 409

  _De Ortu et Causis Subterraneorum_, 594; 600; III; VII; XII; XIII
    Earths, 48
    Gangue minerals, 48
    Gold in alluvial, =76=
    Ground waters, 48
    Juices, 52
    Metals, 51
    Solidified juices, 49
    Stones, 49
    Touchstone, 253
    Veins, 47

  _De Ortu Metallorum Defensio ad J. Scheckium_, 604

  _De Peste_, 605; VIII

  _De Precio Metallorum et Monetis_, 597; 600
    Mention by Agricola, =252=; =263=

  _De Putredine solidas partes_, etc., 605

  _De Re Metallica_, I; XIII; XIV-XVI
    Editions, 600; XIV
    Title page, =XIX=

  De Soto, Fernandes, V

  _De Terrae Motu_, 604

  _De Varia temperie sive Constitutione Aeris_, 604

  _De Veteribus et Novis Metallis_, 597; 600; VII; =XXVI=; 5
    Agricola's training, VI
    Conrad, 24
    Discovery of mines, =36=; 5; 37
    _Gottsgaab_ mine, 74

  Devoz (de Voz), Cornelius, 570; 283

  Diodorus Siculus, 607
    Alum, 566
    Bitumen, 582
    Cupellation, 465
    Drainage of Spanish mines, 149
    Egyptian gold mining, 279
    Fire-setting, 118
    Lead, 391
    Silver from forest fires, =36=
    Tin, 412

  Diogenes Laertius, 7; 9; 10

  Dioscorides, 607; 608
    Alum, 566
    Antimony, 428
    Argol, 234
    Arsenic minerals, 111
    Asbestos, 440
    Bitumen, 584
    Brass making, 410
    Burned lead, 237
    _Cadmia_, 112
    _Chalcitis_, 573
    Copper flowers, 233; 538
    Copper smelting, 403
    Cupellation, 465
    Distillation apparatus, 355
    Dust-chambers, 355; 394
    Emery, 115
    Lead, 392
    Lead minerals, 477
    Lemnian earth, 31
    Litharge, 465
    Lodestone, 115
    _Melanteria_, 573
    _Misy_, 573
    Naphtha, 584
    _Pompholyx_, 394; 410
    Quicksilver, 297; 432
    Red-lead, 232
    Sal-ammoniac, 560
    _Sory_, 573
    _Spodos_, 394
    Verdigris, 440
    Vitriol, 572
    White-lead, 440

  Diphilos, 27; 83

  Diphilus (poet).
    Gold, =10=

  _Dominatores Saxonici_, 606

  Draud, G., 599

  Dudae.
    Alum trade, 569


  Elizabeth, Queen of England.
    Charters to alum makers, 283; 570
    Dedication of Italian _De Re Metallica_ to, XV
    Importation of German miners, 283; 570

  Eloy, N. F. J., 599

  Entzelt (Enzelius, Encelio), 615

  Erasmus, VI; VIII; XIV

  Ercker, Lazarus.
    Amalgamation, 300
    Liquation, 491; 505
    Nitric acid preparation, 443
    Parting gold and silver, 444; 451

  Eriphyle.
    Love of gold, =9=

  Ernest, Elector of Saxony, VIII

  Euripides.
    Amber mentioned by, 35
    Plutus, =8=; =7=

  Ezekiel, Prophet.
    Antimony, 428
    Cupellation, 465
    Tin, 412


  Fabricius, George.
    Agricola's death, X
    Friendship with Agricola, VIII
    Laudatory poem on Agricola, =XXI=
    Letters, IX; X; XIV; XV
    Posthumous editor of Agricola, 603; 606

  Fairclough, H. R., III

  Farinator, Mathias, XXVI

  Ferdinand, King of Austria.
    Agricola sent on mission to, X
    Badoarius sent on mission to, =XXVII=

  Ferguson, John.
    Editions of _De Re Metallica_, XVI; 599

  Feyrabendt, Sigmundi, XV

  Figuier, L., 38

  Flach, Jacques.
    Aljustrel tablet, 83

  Florio, Michelangelo, XV

  Foerster, Johannes, VI

  Francis, Col. Grant, 267; 283

  Francis I., King of France, IX

  Frederick, Elector of Saxony, VIII; IX

  Froben, Publisher of _De Re Metallica_, XIV; XV

  Frontinus, Sextus Julius, 87


  Galen.
    Agricola's revision of, 605; VI
    Lemnian earth, 31
    Mention by Agricola, 2

  _Galerazeya sive Revelator Secretorum_, etc., 606

  Gama, Vasco da, V

  Ganse (Gaunse), Joachim, 267; 283

  Gatterer, C. W., 599

  Geber, =XXVII=; XXX; 609
    Alum, =569=
    Assaying, 219
    Cementation, 459
    Cupels, 466
    Nitric acid, 460
    Origin of metals, 44
    Precipitation of silver nitrate, 443

  _Genesis, Book of_, XII; 43

  George, Duke of Saxony, IX; =310=; 310

  Gesner, Conrad, 52

  Gibbon, Edward, 119

  Glauber, J. R., 410

  Glueck, Cuntz von (_see_ Conrad).

  Gmelin, J. F., 84

  Goecher, C. G., 599

  Godolphin, Sir Francis, 282

  Gowland, William.
    Ancient bronze, 410; 411; 421
    Early smelting, 402

  Graecus, Marcus.
    Saltpetre, 562

  Grommestetter, Paul, 281

  Grymaldo, Leodigaris, XVI

  Gyges, King of Lydia.
    Mines owned by, =26=; 27


  Hannibal.
    Alps broken by vinegar, 119
    Spanish mines, =42=; 42

  Hardy, William, 85

  Heath, Thomas.
    On Hero, 129

  Heliodorus (alchemist), =XXVII=; XXIX

  Henckel, J. F., 53; 112; 410

  Hendrie, R., 609

  Hennebert, E., 119

  Henry, Duke of Brunswick, VII

  Henry, Duke of Meissen, IX

  Hermes (alchemist), =XXVI=; XXVIII

  Hermes (Mercury).
    Magic rod, 40

  Hero.
    Underground surveying, 129

  Herodotus.
    Alum, 566
    Bitumen, 582
    Lead, 391
    Mines of Thrace, 23
    _Nitrum_, 558

  Hertel, Valentine, XIV

  Hiero, King of Syracuse.
    Crown, 247

  Hill, John, 607
    _Auripigmentum_, 111

  Himilce, wife of Hannibal, 42

  Hippocrates.
    Cupellation, 391; 465
    Lodestone, 115

  Hiram, King of Tyre.
    Mines, 214

  Hofmann, Dr. R.
    Biography of Agricola, V; XI; 599; 603

  Homer.
    Amber, 35
    Divining rod, =40=; 40
    Lead, 391
    Smelting, 402
    Steel, 421
    Sulphur, 579
    Tin, 412

  Hommel, W.
    Early zinc smelting, 409

  Horace.
    Metals, =11=
    Wealth, =15=; =17=

  Hordeborch, Johannes, VII

  Houghstetter, Daniel, 283

  Houghton, Thomas, 85

  Humphrey, William.
    Jigging sieve, 283

  Hunt, Robert.
    Roman lead smelting, 392


  Inama-Sternegg, K. T. von, 84

  _Interpretatio Rerum Metallicarum_ (_see_ _Rerum Metall. Interpretatio_).

  Irene, Daughter of Agricola, VII


  Jacobi, G. H.
    Biography of Agricola, V; 599
    Calbus, XXVII; 610

  Jagnaux, Raoul.
    Ancient zinc, 409

  Jason.
    Golden fleece, 330

  Jeremiah.
    Bellows, 362
    Cupellation, 465
    Lead smelting, 391
    _Nitrum_, 558

  Jezebel.
    Use of antimony, 428

  Job.
    Refining silver, 465

  Johannes (alchemist), =XXVII=; XXVIII

  John, Elector of Saxony, IX

  John, King of England.
    Mining claims, 85

  John Frederick, Elector of Saxony, IX

  Josephus.
    Dead Sea bitumen, 33

  Jove.
    Danae legend, =10=

  Justin, =36=

  Juvenal.
    Money, =10=


  Karsten, K. J. B.
    Liquation, 491; 492; 505; 509; 523; 535

  Kerl, Bruno.
    Liquation, 505

  Koenig, Emanuel, XV

  Koenig, Ludwig, XV

  Kopp, Dr. Hermann, 609; 441


  Lampadius, G. A., 462

  Lasthenes.
    Love of gold, =9=

  _Latin Grammar_ (Agricola), 605

  Leonardi, Camilli, 615

  Leupold, Jacob, XV; 599

  _Leviticus_.
    Leprosy of walls, 562

  Lewis, G. R, 84

  Lewis, 454

  Libavis, Andrew, 410

  Lieblein, J. D. C., 129

  Linnaeus, Charles, 559

  Livy.
    Hannibal's march over the Alps, 119

  Lohneys, G. E.
    Liquation, 491; 505
    Parting with antimony, 451
    Zinc, 409; 410

  Lucretia, daughter of Agricola, VII

  Lucretius.
    Forest fires melting veins, =36=

  Lully, Raymond, =XXVII=; XXX

  Luscinus, Fabricius.
    Gold, =9=; =15=

  Luther, Martin, V; VI; VIII; IX

  Lycurgus (Athenian orator).
    Prosecution of Diphilos, 27; 83

  Lycurgus (Spartan legislator).
    Wealth prohibited by, =9=; =15=


  Magellan, F. de, V

  Maltitz, Sigismund, 312

  Manlove, Edward, 70; 85

  Marbodaeus, 615

  Marcellinus, Ammianus.
    On Thucydides, 23

  Marcellus, Nonius, XXXI

  Maria the Jewess, =XXVII=; XXVIII

  Mathesius, Johann.
    Cobalt, 214
    Conrad mentioned by, 24
    _De Re Metallica_, XIV
    King Hiram's mines, 214

  Matthew Paris.
    Cornish miners in Germany, 283

  Maurice, Elector of Saxony, =XXV=; VIII; IX; X

  Mawe, J., 70

  Maximilian, Emperor, =23=; 24

  Meissen, Dukes of (_see under personal names_: Albert, Henry, _etc._).

  Melanchthon.
    Relations with Agricola, VIII; X

  Menander.
    Riches, =8=

  Mercklinus, G. A., 599

  Mercury (_see_ Hermes).

  Merlin (magician), =XXVII=; XXX

  Meurer, Wolfgang.
    Letters, IX; X

  Meyer, Ernst von, 248; 569

  Meyner, Matthias, VII

  Midas, King of Lydia.
    Mines owned by, =26=; 27

  Miller, F. B., 462

  Minerva.
    Magic rod, =40=

  Morris, W. O'C., 119

  Mosellanus, Petrus, VI

  Moses.
    Bitumen, 582
    Lead, 391
    Refining gold, 399
    Rod of Horeb, 38; =40=

  Mueller, Max.
    Ancient iron, 421


  Naevius.
    Money, =20=

  Nash, W. G.
    Rio Tinto mine, 149

  Naumachius.
    Gold and silver, =8=

  Neckam, Alexander.
    Compass, 57

  Newcomen, Thomas, 149

  Nicander.
    On coal, 34

  Nicias.
    Sosias and slaves of, =25=; 25

  _Nuetzlich Bergbuechlin_, 610; =XXVI=; XXVII
    Alluvial gold, 75
    Bismuth, 110; 433
    Compass, 57; 129
    Ore-deposits, 44
    Ore-shoots, 43
    Veins, 43; 46; 73


  Olympiodorus (alchemist), =XXVII=; XXX

  Oppel, van (_see_ Van Oppel).

  Orus Chrysorichites (alchemist), =XXVII=; XXVIII

  Osthanes (alchemist), =XXVII=; XXIX

  Otho the Great, 6

  Otho, Prince, 6

  Ovid.
    Mining censured by, =7=


  Pandulfus Anglus, =XXVI=

  Pantaenetus.
    Demosthenes' oration against, 27; 83

  Pantheus, Augustinus (alchemist), =XXVII=

  Paracelsus, XIV; XXX
    Divining rod, 38
    Zinc, 112; 409

  Paris, Matthew (_see_ Matthew Paris).

  Pebichius (alchemist), =XXVII=; XXVIII

  Pelagius (alchemist), =XXVII=

  Pennent, Thomas, 570

  Percy, John.
    Cementation, 454; 459
    Cupellation, 465
    Liquation, 491
    Parting with antimony, 451; 452

  Peregrinus, Petrus.
    Compass, 57

  Petasius (alchemist), =XXVII=; XXVIII

  Petrie, W. M. F.
    Egyptian iron, 421
    Mt. Sinai copper, 402

  Pettus, Sir John, XVI; 283

  Phaenippus.
    Demosthenes' oration against, 27; 83

  Phaeton's sisters, 35

  Pherecrates, =XXVI=

  Philemon.
    Riches, 7

  Philip of Macedonia, 27

  Philip, Peter, 282

  Phillips, J. A., 410

  Philo.
    Lost work on mining, =XXVI=

  Phocion.
    Bribe of Alexander, =9=; =15=

  Phocylides.
    Gold, =7=

  Photius, 279
    Fire-setting, 118

  Pindar.
    Wealth, =19=; 252

  Pius II, Pope.
    Alum maker, 570

  Pizarro, F., =V=

  Plateanus, Petrus, XIV

  Plautus.
    Gold, =10=

  Pliny (Caius Plinius Secundus), =XXVI=; 608
    Alluvial mining, 331; 333
    Alum, 566
    Amalgamation, 297
    Amber, 35
    Antimony, 428
    Argol, 234
    _Arrhenicum_, 111
    Asbestos, 440
    Bitumen, =33=; 583
    Brass, 410
    British miners, 83
    Cadmia, 112
    Cementation, 459
    Chrysocolla, 560
    Copper flowers and scales, 233; 538
    Copper smelting, 404
    Cupellation, 466
    Drainage of Spanish mines, 149
    _Electrum_, 458
    Fire-setting, 118
    Galena, 476
    Glass, 585; 586
    Hannibal's silver mine, =42=; 42
    Hoisting ore, =157=; 157
    Iron, 11
    Jew-stone, 115
    Lead, 392
    Lemnian earth, 31
    Litharge, =475=; 466; 501
    Lodestone, 115
    Manganese (?), 586
    Metallurgical appliances, 355
    _Misy_, 573
    _Molybdaena_, 466; 476
    Naphtha, 583
    _Nitrum_, 560
    Ore-dressing, 281
    Outcrops, 65
    _Pompholyx_, 396
    Protection from poison, 215
    Quicksilver, 433
    Red-lead, 232
    Roasting, 267
    Sal-ammoniac, 560
    Salt from wood, 558
    Silver-lead smelting, 392
    _Sory_, 573
    _Spodos_, 396
    _Stannum_, 473
    Tin, Spanish, 412
    _Tophus_, 233
    Touchstone, =256=; 253
    Turfs in sluices, =331=; 332
    _Vena_, 43
    Ventilation with wet cloths, =210=; 210
    Verdigris, 440
    Vitriol, 572
    White-lead, 440

  Plutarch, 25

  Pluto, =216=

  Polybius.
    Ore washing, 281
    Silver-lead smelting, 392; 465

  Polymnestor, King of Thrace.
    Love of gold, =9=; =16=

  Poertner, Hans, 281

  Posepny, Franz, 53

  Posidonius.
    Asphalt and naphtha, 584
    Drainage of Spanish mines, 149
    Silver from forest fires, 36

  Priam, King of Troy.
    Gold mines of, =26=; 27

  _Probierbuechlein_, 612; =XXVI=
    Amalgamation, 297
    Antimony, 420
    Assaying, 220
    Assay ton, 242
    Bismuth, 433
    Cementation, 454
    Nitric acid, 439
    Parting, 461; 462; 463
    Precipitation of silver nitrate, 443
    Residues from distillation of nitric acid, 235; 443
    Roasting, 267
    Stock fluxes, 235; 236
    Touchstone, 253

  Propertius.
    Gold, =10=

  Pryce, William.
    Adam's fall, 353
    Divining rod, 38
    Juices, 1
    Ore-deposits, 53
    Stamp-mill, 282
    Stringers, 70

  Psalms.
    Silver refining, 465

  Pulsifer, Wm. H., 391

  Pygmalion.
    Love of gold, =9=; =16=


  Rachaidibus (alchemist), =XXVII=

  Rameses I.
    Map of mines, 129

  Rameses III.
    Leaden objects dating from, 391

  Raspe, R. E., 300

  Rawlinson, George, 583

  Ray, P. Chandra.
    Indian zinc, 409

  Raymond, Rossiter W., 38

  _Rechter Gebrauch der Alchimey_, 606

  _Rerum Metallicarum Interpretatio_, 597; VII; 600

  Reuss, F. A., 599

  Richter, A. D., V; 599

  Rodianus (alchemist), =XXVII=; XXVIII

  Roessler, B., 53

  Royal Geological Society of Cornwall, 84

  Ruehlein von Kalbe (_see_ Calbus).


  Salmoneus.
    Lightning, =11=

  Sandwich, Earl of, trans. Barba's book, 300

  Sappho.
    Wealth, =19=

  Savery, Thomas, 149

  Saxony, Dukes and Electors of.
    (_See under personal names_: Albert, Ernest, _etc._).

  Schliemann, H., 391

  Schlueter, C. A.
    Artificial zinc vitriol, 572
    Copper refining, 535
    Cupellation, 464
    Liquation, 491; 505
    Parting with sulphur, 462

  Schmid, F. A., V; XV; 599

  Schnabel and Lewis, 465

  Scott, Sir Walter.
    "Antiquary," 300

  Seneca.
    Wealth of, =15=

  Seneferu.
    Copper mines, 402

  Seti I.
    Map of mine, 129

  Shaw, Peter, XXVIII

  Shoo King.
    Copper and lead, 391; 402
    Iron, 421

  Shutz, Christopher, 283

  Sigfrido, Joanne.
    Ed. Agricola's works, XV

  Socrates.
    Riches, =7=; =9=; =14=; =18=

  Solinus, C. Julius.
    _Solifuga_, =216=; 216

  Solomon, King.
    Cobalt in mines, 214

  Solon.
    Scarcity of silver under, 27

  Sosias, the Thracian.
    Slaves employed by, =25=

  Stahl, G. E., 53

  Staunton, Sir George, 409

  Stephanus (alchemist), =XXVII=; XXX

  Stephenson, George, 149

  Strabo, 607
    Arsenical minerals, 111
    Asbestos, 440
    Asphalt, 584; 33
    Bellows, 362
    Cementation, 458
    Cupellation, 465
    Drainage of Spanish mines, 149
    Forest fires melting veins, 36
    High stacks, 355
    Lydian mines, 26; 27
    Mt. Laurion, 27
    Silver-lead smelting, 391
    Spanish ore-washing, 281
    Zinc (?), 409

  Strato.
    Lost work on mines, =XXVI=; =XXVII=; XII

  Struve, B. G., 599

  Synesius (alchemist), =XXVII=; XXIX


  Tantalus, 27

  Taphnutia (alchemist), =XXVII=; XXVIII

  Tapping, Thomas, 85

  Thales of Miletus.
    Amber, 35

  Themistocles.
    Athenian mine royalties, 27

  Theodor, son of Agricola, VII

  Theognis.
    Cupellation, 465
    On greed, =18=
    Plutus, =8=
    Refining gold, 399

  _Theological Tracts_ (Agricola), 605

  Theophilus (alchemist), =XXVII=; XXVIII

  Theophilus the Monk, 609
    Brass making, 410
    Calamine, 112
    Cementation, 459
    Copper refining, 536
    Copper smelting, 405
    Cupels, 466
    Divining rod, 38
    Liquation, 494
    Metallurgical appliances, 355
    Parting with sulphur, 461
    Roasting, 267

  Theophrastus, XII; 607
    Amber, 35
    Arsenical minerals, 111
    Asbestos, 440
    Assaying, 219
    Coal, 34
    Copper minerals, 110
    Copper ore, 403
    Emery, 115
    Lodestone, 115
    Lost works, =XXVI=; 403
    Origin of minerals, 44
    Parting precious metals, 458
    Quicksilver, 297; 432
    Touchstone, 252
    Verdigris, 440
    Vermilion, 232
    White-lead, 391; 440

  Thompson, Lewis, 462

  Thoth.
    Hermes Trismegistos, XXIX

  Thotmes III.
    Lead, 391; 582

  Thucydides.
    Mining prefect, =23=; 23; 95

  Tibullus.
    Wealth condemned by, =16=

  Timocles.
    Riches, =8=

  Timocreon of Rhodes.
    Plutus, =7=

  Tournefort, Joseph P. De, 566

  Tubal Cain.
    Instructor in metallurgy, 353

  Tursius, =24=

  Twain, Mark.
    Merlin, XXX

  _Typographia Mysnae et Toringiae_, 605


  Ulloa, Don Antonio De, 298

  Ulysses.
    Magic rod, =40=


  Valentine, Basil, XXX; 609
    Antimony, 429
    Divining rod, 38
    Parting with antimony, 461
    Zinc, 409

  Valerius, son of Agricola, VII

  Van der Linden, J. A., 599

  Van Oppel, XIII; 52

  Varro, Marcus, =XXVI=

  Vasco da Gama (_see_ Gama, Vasco da).

  Veiga, Estacia de, 83

  Velasco, Dom Pedro De, 298

  Veradianus (alchemist), =XXVII=; XXVIII

  Villa Nova, Arnold De (alchemist), =XXVII=; XXX

  Virgil.
    Avarice condemned by, =16=

  Vitruvius, 608
    Amalgamation, 297
    Hiero's Crown, 248
    Pumps, 174; 149
    Red-lead, 232
    Surveying, 129
    Verdigris, 440
    White-lead, 440

  Vladislaus III., King of Poland, =24=

  Von Oppel (_see_ Van Oppel).

  Voz, Cornelius de (_see_ Devoz, Cornelius).


  Wallerius, J. G., 234; 273

  Watt, James, 149

  Watt, Robert, XXVII

  Wefring, Basilius, XIV

  Weindle, Caspar, 119

  Weinart, B. G., 599

  Weller, J. G., V

  Werner, A. G., XIII; 53

  Wilkinson, J. Gardner.
    Bitumen, 582
    Egyptian bellows, 362
    Egyptian gold-washing, 279

  Williams, John, 53

  Winkler, K. A., 464

  Wrotham, William de, 85; 413; 473


  Xenophon.
    Athenian mines, =28=; =83=; 27; 29
    Fruitfulness of mines, =6=
    Mining companies, 90
    Mine slaves, 25; 28
    Quoted by Agricola, =26=; =28=


  Zimmerman, C. F., 53

  Zosimus (alchemist), =XXVII=; XXIX




INDEX TO ILLUSTRATIONS.


  Alum Making, =571=

  Amalgamation Mill, =299=

  Ampulla, =442=; =446=

  Argonauts, =330=

  Assay Balances (_see_ Balances).

  Assay Crucible, =229=

  Assay Furnaces.
    Crucible, =227=
    Muffle, =223=; =224=


  Balances, =265=

  Baling Water, =199=

  Bars, for Furnace Work, =377=; =389=

  Batea, =157=

  Bellows.
    For blast furnaces, =359=; =365=; =368=; =370=; =372=
    For mine ventilation, =208=; =209=; =211=
    For tin furnace, =419=

  Bismuth Smelting, =434=; =435=; =436=; =437=

  Bitumen Making, =582=

  Bitumen Spring, =583=

  Bowls for Alluvial Washing (_see also_ Batea), =336=

  Buckets.
    For hoisting ore, =154=
    For hoisting water, =158=

  Buddle, =301=; =302=; =314=; =315=

  Building Plan for Refinery, =493=

  Building Plan for Smelter, =361=


  Chain Pumps, =173=; =174=; =175=

  _Chrysocolla_ Making, =585=

  Circular Fire (_see_ Ring-Fire).

  Clay Washing, =374=; =375=

  Compass, =57=; =59=; =142=; =147=

  Copper Mould for Assaying, =250=

  Copper Refining, =534=; =537=

  Copper Refining Furnace, =532=

  Crane.
    For cupellation furnace, =479=
    For liquation cakes, =514=

  Crowbars, =152=

  Cupel, =229=
    Mould, =231=

  Cupellation Furnace, =468=; =470=; =474=
    At Freiberg, =481=
    In Poland, =482=

  Cutting Metal, =269=


  Descent into Mines, =213=

  Dipping-pots, =385=; =387=; =389=; =393=; =415=; =417=

  Distillation (_see_ Nitric Acid _and_ Quicksilver).

  Divining Rod, =40=

  Dogs Packing Ore, =168=

  Drifts, =105=

  Drying Furnace for Liquation, =525=; =527=; =528=

  Dust Chambers, =395=; =417=


  Fans, Ventilation, =204=; =205=; =206=; =207=

  Fire-Buckets, =377=

  Fire Pump, =377=

  Fire-Setting, =120=

  Forehearth, =357=; =358=; =383=; =385=; =387=; =389=; =417=

  Frames (or Sluices) for Washing Ore or Alluvial, =322-324=;
    =326-329=; =331-333=

  Furnaces.
    Assaying (_see_ Assay Furnaces).
    Blast, =357=; =358=; =373=; =377=; =383=; =385=; =387=; =389=;
      =395=; =419=; =424=; =508=
    Copper refining, =537=
    Cupellation, =468=; =470=; =474=; =481=; =482=
    Distilling sulphur, =277=
    Enriching copper bottoms, =510=
    Glass-making, =587=; =588=; =589=; =591=
    Iron smelting, =422=; =424=
    Lead smelting (_see also_ Furnaces, blast), =393=
    Liquation, =517=; =519=; =525=; =527=; =528=
    Nitric acid making, =442=
    Nitric acid parting, =446=
    Parting precious metals with antimony, =453=
    Ditto cementation, =455=
    Quicksilver distillation, =427-432=
    Refining silver, =485=; =486=; =489=
    Roasting, =276=
    Steel making, =425=
    Tin burning, =349=
    Tin smelting, =415=


  Gad, =150=

  Glass Making, =591=
    Furnaces, =587=; =588=; =589=

  Ground Sluicing, =337=; =340=; =343=; =346=; =347=


  Hammers, =151=
    With water-power, =422=; =425=

  Heap Roasting, =275=; =278=

  Hearths.
    For bismuth smelting, =436=; =437=
    For heating copper cakes, =504=
    For melting lead, =393=
    For melting lead cakes, =499=
    For refining tin, =418=
    For roasting, =277=

  Hemicycle, =138=

  Hoe, =152=


  _Intervenium_, =50=

  Iron Fork for Metal, =387=

  Iron Hook for Assaying, =240=

  Iron Smelting, =422=; =424=

  Iron Tools, =150=


  Jigging Sieve, =311=


  Ladders, =213=

  Ladle for Metal, =383=

  Lead Mould for Assaying, =240=

  Liquation Cakes.
    Dried, =530=

  Liquation Cakes, Exhausted, =522=

  Liquation Furnaces, =517=; =519=; =525=; =527=; =528=

  Lye Making, =557=


  Matte Roasting, =350=; =351=

  Meers, Shape of, =79=; =80=; =86=; =87=; =89=

  Mills for Grinding Ore, =294=; =296=

  Muffle Furnaces, =223=; =489=

  Muffles, =228=


  Nitric Acid Making, =442=

  _Nitrum_ Pits, =559=


  _Operculum_, =446=

  _Orbis_, =142A=


  Parting Precious Metals.
    With antimony, =453=
    By cementation, =455=
    With nitric acid, =446=
    With sulphur, =449=

  Picks, =152=

  Plummet level.
    Standing, =143=
    Suspended, =146=

  Pumps.
    Chain, =173=; =174=; =175=
    Duplex suction, =180=; =185=; =189=
    Rag and chain, =191=; =193=; =194=; =195=
    Suction, =177=; =178=; =179=; =182=; =183=; =187=


  Quicksilver Distillation, =427=; =429=; =430=; =431=; =432=


  Rag and Chain Pumps, =191=; =193=; =194=; =195=; =197=

  Rammers for Fire-Clay, =377=; =383=

  Ring-Fire, for Parting with Sulphur, =449=

  Roasting (_see also_ Heap _and_ Stall Roasting), =278=; =350=; =351=;
    =274=; =275=; =276=

  Rosette Copper Making, =537=


  Salt.
    Boiling, =549=; =554=; =555=
    Caldron, =551=; =553=
    Evaporated on faggots, =556=
    Pans, =547=
    Wells, =549=

  Saltpetre Making, =563=

  Saxon Lead Furnace, =393=

  Scorifier, =229=

  Seams in the Rocks, =54=; =55=; =56=; =60=; =72=

  Shafts.
    Inclined, =104=
    Timbering, =123=
    Vertical, =103=; =105=

  Shears for Cutting Metal, =269=

  Shield for Muffle Furnace, =241=

  Sifting Ore, =287=; =288=; =289=; =291=; =292=; =293=; =311=; =342=

  Silver.
    Cakes, Cleansing of, =476=; =488=
    Refining, =484=; =485=; =486=; =489=

  Sleigh for Ore, =168=

  Sluicing Tin, =337=; =338=; =340=; =343=

  Smelter, Plan of Building, =361=

  Soda Making, =561=

  Sorting Ore, =268=; =270=

  Spalling Ore, =270=; =271=; =272=

  Stall Roasting.
    Matte, =350=; =351=
    Ore, =274=; =276=

  Stamp-mill, =284=; =286=; =287=; =299=; =313=; =320=; =321=; =373=
    For breaking copper cakes, =501=

  Stamps, =285=

  Steel Furnace, =425=

  Strake, =302=; =303=; =305=; =306=; =307=; =341=; =342=; =345=
    Canvas, =308=; =309=; =317=; =321=; =329=

  Streaming for Tin, =318=

  Stringers.
    Associated, =71=
    _Fibra dilatata_, =71=
    _Fibra incumbens_, =71=
    Oblique, =71=
    Transverse, =71=

  Surveying.
    Rods, =138A=
    Shafts and Tunnels, =131=
    Triangles, =133=; =134=; =135=; =136=; =137=; =139=; =140=

  Suction Pumps (_see_ Pumps).

  Sulphur Making, =579=; =581=


  Tap-holes in Furnaces, =389=

  Tapping-bar, =383=; =385=

  "Tests" for Refining Silver, =484=; =485=

  Timbering.
    Shafts, =123=
    Tunnels, =125=

  Tin.
    Bars, =415=
    Burning, =349=
    Refining, =418=
    Smelting, =415=; =419=

  Touch-needles, =255=

  Trays for Washing Alluvial, =334=

  Tread Whim, =163=

  Trough, =159=
    For washing alluvial, =335=; =348=

  Trucks, =156=

  Tunnels, =103=; =104=; =105=; =120=
    Timbering, =125=


  Veins.
    Barren, =73=
    Beginning of, =69=
    Cavernous, =73=
    Curved, =61=
    End of, =69=
    Head of, =69=
    Horizontal, =61=
    Intersections of, =64=; =65=; =66=; =67=; =68=
    Solid, =73=
    Strike of, =62=; =63=

  _Vena cumulata_, =49=; =70=

  _Vena dilatata_, =45=; =50=; =54=; =60=; =61=; =68=; =69=

  _Vena profunda_, =45=; =50=; =53=; =61=; =62=; =63=; =64=; =68=

  Ventilating with Damp Cloth (_see also_ Bellows, Fans, and
    Windsails), =212=

  Vitriol Making, =567=; =574=; =575=; =576=; =577=


  Wagons, for Hauling Ore, =170=

  Washing Ore (_see_ Sifting Ore).

  Water Tanks, under Furnaces, =358=

  Wedges, =150=

  Weights, for Assay Balances, =262=

  Westphalian Lead Smelting, =393=

  Wheelbarrows, =155=

  Whims.
    Horse, =165=; =167=
    Tread, =163=

  Windlasses, =161=; =162=; =171=

  Winds, Direction of, =59=

  Windsails for Ventilation, =201=; =202=; =203=




Transcriber's Notes.


This document includes quotes from very early authors. As such, it's no
surprise that there are many spelling and punctuation irregularities.
Also the authors were American, but writing for a British journal. In
addition, whether "ae" and "oe" appear as ligatures or separate
characters seems to be fairly random. Unless there was a clearly
preferred spelling choice, variants were kept as is. All changes are
explicitly documented below. Noted spelling variants that were preserved
include: "aluminum" and "aluminium;" "ampullas" and "ampullae;"
"beechwood" and "beech-wood;" "Bluetstein" and "Bluet stein;" "brick dust"
and "brickdust;" "calcspar," "calc spar" and "calc-spar;" derivatives of
"crossbar" and "cross-bar," and similarly for "crosscut," "crosspiece,"
etc.; (Hans von) "Dechen" and "Decken;" "desulphurizing" and
"de-sulphurizing;" "dissension" and "dissention" (and their plurals);
"distill" and "distil" (and derivatives); "encrusted" and "incrusted;"
"enquire" and "inquire" (and derivatives); "ensure" and "insure;"
(Lazarus) "Ercker" and "Erckern;" "flavor" and "flavour;" "fluor-spar"
and "fluorspar;" "Flusse" and "Fluesse;" (Rotenburg an der) "Fulda" and
"Fulde;" "Gatter" and "Gatterer" may be the same person; "gold workers,"
"goldworkers" and "gold-workers;" "gray" and "grey" (and derivatives);
"grove" and "groove" (English mining term for a shaft); "halitum" and
"halitus;" "Henckel" and "Henkel;" "holm oak" and "holmoak;"
"homogenous" and "homogeneous;" Daniel "Houghsetter," "Houghstetter" and
"Hochstetter;" "Joannes" and "Johannes" (the alchemist); "Johanes" and
"Johannes" (Aurelius Augurellus), a.k.a. "John Aurelio Augurello;"
"Juedenstein" and "Jueden stein;" "Kinstock" and "Kinstocke;" "Lautental"
and "Lautenthal;" "lawsuit" and "law-suit;" "Leipsic" and "Leipzig;"
"Krat" and "Kratt;" "Mosaic" and "Mosaick;" "mineralogic" and
"mineralogical;" "Nuetzlich Bergbuechlin," "Nuetzliche Bergbuechlin,"
"Nuetzlich Bergbuechlein," and "Nuetzliche Bergbuechlein;" "organisation"
and "organization;" (Thomas) "Pennant" and "Pennent;" "Probier
Buechlein," "Probierbuechlin," "Probierbuechlein," "Probirbuechlein," and
"Probirbuechleyn" (which may be different books in some cases);
derivatives of "pulverise" and "pulverize;" "reagent" and "re-agent"
(and their plurals); derivatives of "recognise" and "recognize;"
"republished" and "re-published;" "salamander har" and "salamanderhar;"
"seashore" and "sea-shore;" "semicircle" and "semi-circle" (and
derivatives); "shovelful" and "shovel-ful;" "spiesglas," "spiesglass,"
and "spiesglasz;" "Turkey oak" and "turkey-oak;" "Vannucci," "Vannuccio"
and "Vanuccio" (Biringuccio); "Vectarii" and "Vectiarii;" derivatives of
"volatilise" and "volatilize."

There appears to be no rule whether punctuation following a quote should
be inside or outside the quotation marks. The text was simply left as
is.

There appears to be no rule whether Roman numerals have periods after
them or not; even references to the same document may differ. The text
was simply left as is.

For the text version of the document, replaced the oe-ligature with the
separate characters "oe." Also removed the macron from the "e" in
"pectos."

Some footnote numbers are skipped. To avoid confusion with references to
the footnotes, none of the footnotes were re-numbered. In particular,
Book I does not have footnote 24; Book VI does not have footnote 9; Book
VIII does not have footnote 9, 10 or 18; Book IX does not have footnote
24; Book XI does not have footnote 3.

Inserted missing anchor for footnote 1 on page v.

Changed "Albertham" to "Abertham" on page vii: "the God's Gift mine at
Abertham."

Changed "honored" to "honoured" on page xi: "most honoured citizens."

Treated the explanatory text on page xxiv as a footnote (number 1) and
created its anchor on page xxi.

Changed "license" to "licence" in the note on page xxiv: "only poets
have licence."

Changed "Bibliotheque" to "Bibliotheque" in the footnote on page xxix:
"the Bibliotheque Nationale."

Changed "Theosebeia" to "Theosebia" and inserted closing double
quotation mark after "written to Theosebia, etc....'" on page xxx.

Left "loadstone" on page 2 although it's spelled "lodestone" everywhere
else, because it's in a quote.

Changed "silver-mines" to "silver mines" on page 5: "the silver mines at
Freiberg."

Removed the extra comma after "ll." in footnote 20 on page 11: "Odes,
I., 35, ll. 17-20;" and in footnote 21 on page 15: "Satires, II., 3, ll.
99-102."

Changed "realised" to "realized" on page 25: "his hopes are not
realized."

Removed extra double quotation mark from before "probable that the work"
on page 28.

Changed "Hipprocrene" to "Hippocrene" in footnote 19 on page 37: "named
Hippocrene after that horse."

Changed "Joachimstal" to "Joachimsthal" on page 42.

Adjusted the formats of the captions to the illustrations on page 45,
55, 56 and 60 to be consistent with other captions.

Removed extra double quotation mark after "not a metal" in the footnote
from page 51.

Changed "foot walls and hanging walls" to "footwalls and hangingwalls"
on page 65.

Changed "hanging-wall" to "hangingwall" in footnote 5 on page 80: "into
the hangingwall."

Changed "Phaenippis" to "Phaenippus" in the footnote on page 83: "the
other against Phaenippus."

Inserted double quotation mark after "Droit Francais et Etranger" in the
footnote on page 84.

Changed "Inama-Strenegg" to "Inama-Sternegg" in the footnote on page 84.

Changed "Himmelich" to "Himmelisch" on page 92: "Himmelisch Hoez."
"Himmelsch hoz" was retained as a variant elsewhere.

Changed "shovelers" to "shovellers" on page 100: "miners, shovellers,
windlass men."

The table in the note on page 109 refers to note 7 on p. 573. It would
make more sense to refer to note 8, but was left as is.

Changed "chrusos" to "chrysos" in the footnote on page 110: "(chrysos,
gold and kolla, solder)."

The footnote on page 110 contains the reference "(see note xx., p. x)."
Rather than Roman numerals, this appears to be a placeholder to a
reference that was not filled in. Perhaps it should be "(see note 8, p.
560)," but it was left as is.

Changed "tinstone" to "tin-stone" in the footnote on page 110.

Changed "De La Pirotechnica" to "De La Pirotechnia" in the footnote on
page 112.

Changed "Mansfeld" to "Mannsfeld" in the footnote on page 113:
"Mannsfeld copper schists."

Changed "CoAsA" to "CoAsS" in the footnote on page 113: "Cobaltite
(CoAsS)."

Changed "Phoenecians" to "Phoenicians" on page 119: "Phoenicians must
have possessed."

Changed "hanging wall" to "hangingwall" on page 124: "the hangingwall
and the footwall."

Changed "venae dilatatae" (ae-ligature) to "venae dilatatae" on page 127:
"mine venae dilatatae lying down."

Changed "venae cumulatae" (ae-ligature) to "venae cumulatae" on page 128:
"as to venae cumulatae."

Changed "Watts's" to "Watt's" in footnote 1 on page 149: "Watt's
improvements."

Changed "locks" to "blocks" on page 151: "blocks, and plates."

Something is wrong with the sentence on page 153 that ends with the
reference to footnote 3. One metreta is larger than one-sixth of a
congius. Perhaps "metreta" and "congius" should be swapped in this
sentence, but it was left as is.

Changed "bail" to "bale" on page 153: "iron semi-circular bale."

Changed "Fosilium" to "Fossilium" twice in the footnote on page 155: "De
Natura Fossilium."

Changed "decends" to "descends" on page 166: "descends into an
underground chamber," and again on page 190: "the plank descends."

Changed "Pig-skin" to "Pigskin" in the caption to the illustration on
page 168: "Pigskin sacks."

Left "vapor" as is in footnote 20 on page 210 although it's spelled
"vapour" everywhere else, because it's in a quote.

Changed "de hydrated" to "dehydrated" in the footnote on page 221:
"Probably dehydrated alum."

Changed "Na_{2}Co_{3}" to "Na_{2}CO_{3}" in the footnote on page 222.

Changed "fore-part" to "forepart" on page 226: "the forepart lies."

Changed "four-fold" to "fourfold" on page 226: "with fourfold curves."

Changed "or" to "of" on page 230: "an ore of copper."

Changed "factictius" to "facticius" in the footnote on page 233: "Sal
facticius."

Changed "Interpretaltio" to "Interpretatio" in footnote 13 on page 234:
"Interpretatio, die heffe."

Changed "Loehneys" to "Lohneys" in footnote 21 on page 237.

"Cramner" in footnote 21 on page 237 may be a typo for "Cramer," but it
was left as is.

Changed "neutralized" to "neutralised" in footnote 21 on page 237:
"neutralised by the nitre."

Changed "notes" to "note" in footnote 33 on page 248: "note 10."

Changed "liquified" to "liquefied" on page 250: "has become sufficiently
liquefied."

Changed "touchneedles" to "touch-needles" in footnote 37 on page 253:
"detailed account of touch-needles."

The reference to page 259 in footnote 39 on page 253 does not seem to
make sense, but was not changed. Perhaps the reference should be to
footnote 27 on page 242.

In the table on page 257, the entries for the 20th and 21st needles do
not add up, because the entry for the number of sextulae of copper
belongs in the 21st needle, not the 20th. This was corrected. However,
there are other errors in this table, which are not so obvious and were
not corrected. In particular, the entries for the 22nd, 28th and 31st
needles do not add correctly.

In the table on page 258, the number for the siliquae of copper was
sometimes in the sextulae column. These were corrected. The affected
lines were the ones for needles 13, 22 and 24. There is some other error
(uncorrected) for the 17th needle; probably it should have another
sextula of silver.

Filled in the missing "4" in the line for the 8th needle in the table on
page 260.

Changed "52" to "25" in the line for the 3rd weight in the table for the
"greater" weights on page 261.

Changed "stele" to "stelae" on page 279: "Certain stelae."

Changed "hanging-wall" to "hangingwall" on page 279: "the hangingwall
rock;" and on page 292: "from the hangingwall."

Changed "lead" to "led" in the footnote on page 281: "led through a
series."

Changed "Humpfrey" to "Humphrey" in the footnote on page 283: "William
Humphrey."

Changed "Erbisdroff" to "Erbisdorff" on page 304: "tin-stuff of
Schlackenwald and Erbisdorff."

Changed "colleced" to "collected" on page 328: "concentrates are
collected."

Changed "civilisation" to "civilization" in footnote 17 on page 330:
"glimmer of civilization."

Changed "Chapter IX" to "Book IX" in footnote 22 from page 350.

Changed "Thothmes" to "Thotmes" in footnote 6 on page 362: "the time of
Thotmes III."

Changed "unseasonable" to "unreasonable" on page 374: "yet it is not
unreasonable."

Inserted "L--" in the caption for the illustration on page 385.

Footnote 23, p. 391, refers to a note on p. 265, but there is no such
note.

Changed "carni" to "Carni" in the caption to the illustration on page
393.

Removed extra right parenthesis at end of footnote 28, from page 396,
and footnote 7, from page 441.

Changed "Agatharcides" to "Agatharchides" in the footnote on page 399,
and again in the footnote on page 465.

Changed "bare" to "bars" on page 418: "the lattice-like bars sells."

Changed "Nuetliche" to "Nuetzliche" in footnote 59 on page 433: "the
Nuetzliche Bergbuechlein in association."

Changed "threequarters" to "three-quarters" on page 437: "three-quarters
of a foot."

Changed "the spout from the opercula extends" to "the spouts from the
opercula extend" in the caption to the illustration on page 446.

Changed "earthern" to "earthen" on page 451: "melted with copper in a
red hot earthen crucible."

Changed "Boussingalt" to "Boussingault" in footnote 18 on page 454:
"Investigation by Boussingault."

Footnote 26, on page 465, refers to a discussion on page 389; there is
no such discussion. Perhaps the note on page 390 was intended, but no
change was made.

The reference to p. 480 in the footnote on page 466 doesn't seem to make
sense. Perhaps the reference should be to the note on p. 475 or the
illustration on p. 481, but it was not changed.

Changed "Agricolas'" to "Agricola's" in footnote 27 on page 467.

Changed "roman" to "Roman" in the caption to the figure on page 481.

Changed "pinewood" to "pine-wood" on page 496: "shingles of pine-wood."

Changed "Fore-hearths" to "Forehearths" in the caption to the
illustration on page 508.

Changed "or" to "of" in the table in footnote 17 on page 512: "564.8
lbs. of (A)."

Changed "near-by" to "nearby" on page 526: "in a nearby timber."

Changed "fore-hearth" to "forehearth" on page 540: "into the
forehearth," and on page 543: "into the forehearth."

Changed "sideboards" to "side-boards" on page 552: "the side-boards are
fixed."

Changed superscripts to subscripts in footnote 9 on page 561:
"Ca(NO_{3})_{2} + K_{2}CO_{3} = CaCO_{3} + 2KNO_{3}."

Changed "crystallised" to "crystallized" in footnote 9 on page 561.

Changed "hydros" to "hydrous" in the footnote on page 565: "the hydrous
sulphate."

Changed "octrahedra" to "octahedra" in the footnote on page 565.

Changed "subtance" to "substance" in footnote 11 on page 572: "that
feathery substance."

Changed "ventholes" to "vent-holes" on page 580: "two or three
vent-holes."

Changed "prehistoric" to "pre-historic" on page 582: "from pre-historic
times."

Changed "Rawlinsons, Trans." to "Rawlinson's Trans." in the footnote on
page 583.

Changed "Neavius" to "Naevius" on page 596: "Johannes Naevius."

Changed "Unstaendliche" to "Umstaendliche" in footnote 3 on page 599:
"Umstaendliche ... Chronica."

Changed "Watts" to "Watt" on page 605: "Watt mentions it."

Changed "begininng" to "beginning" on page 611: "beginning of the
sixteenth centuries."

Changed "oxidising" to "oxidizing" on page 615: "an oxidizing blast."

Changed "Oryguia" to "Orguia" on page 617.

Changed the reference for Annaberg on page 619 from "XXI" to "XXXI."

Changed "Ceragurite" to "Cerargurite" in its index entry on page 620.

Changed "Fibrae" to "Fibrae" (ae-ligature) in its index entry on page
622.

Changed the reference for Glass on page 623 from "534-592" to "584-592."

Changed two references for Magnes on page 625 from "584" to "585."

Changed the reference for Nuremberg, Scale of Weights on page 626 from
"264" to "263."

Changed "Pickscheifer" to "Pickschiefer" in its index entry on page 626.

Changed the reference for Proustite on page 626, and the references for
Pyrargyrite, for Ruby Silver, for Silver, for Silver Glance and for
Silver Ores on page 627, from "109" to "108."

Changed the reference for Quicksilver on page 626 from "111" to "110."

Changed "Stuices" to "Sluices" on page 626, in the index entry for
"Pockets in Alluvial Sluices."

Changed the references for Schneeberg, St. George mine and for St.
George Mine on page 627 from "92" to "91."

Changed "Steinmack" to "Steinmarck" in its index entry on page 628.

In the Index to Persons and Authorities (starting page 630), there are a
number of references to page 599 that appear to make more sense as
references to 603, but which were not changed.

Changed the reference for Venice, Scale of Weights on page 630 from
"264" to "263."

Changed the reference for De Mensuris et Ponderibus, Weights and
Measures on page 632 from "264" to "263."

Changed the reference for De Natura eorum quae Effluunt ex Terra,
Dedication on page 632 from "VIII" to "VII."

Changed the reference for De Precio Metallorum et Monetis on page 632
from "264" to "263."

Changed "Diphilus" to "Diphilos" in its index entry on page 632.

Changed the references for Forehearth and for Furnaces, Blast on page
637 from "390" to "389."

Changed the references for Pumps, Suction on page 638 from "188; 137" to
"183; 187."

Changed the reference for "Tests" for Refining Silver on page 638 from
"384" to "484."





End of the Project Gutenberg EBook of De Re Metallica, by Georgius Agricola

*** END OF THIS PROJECT GUTENBERG EBOOK DE RE METALLICA ***

***** This file should be named 38015.txt or 38015.zip *****
This and all associated files of various formats will be found in:
        https://www.gutenberg.org/3/8/0/1/38015/

Produced by Malcolm Farmer, Stephen H. Sentoff and the
Online Distributed Proofreading Team at https://www.pgdp.net


Updated editions will replace the previous one--the old editions
will be renamed.

Creating the works from public domain print editions means that no
one owns a United States copyright in these works, so the Foundation
(and you!) can copy and distribute it in the United States without
permission and without paying copyright royalties.  Special rules,
set forth in the General Terms of Use part of this license, apply to
copying and distributing Project Gutenberg-tm electronic works to
protect the PROJECT GUTENBERG-tm concept and trademark.  Project
Gutenberg is a registered trademark, and may not be used if you
charge for the eBooks, unless you receive specific permission.  If you
do not charge anything for copies of this eBook, complying with the
rules is very easy.  You may use this eBook for nearly any purpose
such as creation of derivative works, reports, performances and
research.  They may be modified and printed and given away--you may do
practically ANYTHING with public domain eBooks.  Redistribution is
subject to the trademark license, especially commercial
redistribution.



*** START: FULL LICENSE ***

THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full Project
Gutenberg-tm License (available with this file or online at
https://gutenberg.org/license).


Section 1.  General Terms of Use and Redistributing Project Gutenberg-tm
electronic works

1.A.  By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement.  If you do not agree to abide by all
the terms of this agreement, you must cease using and return or destroy
all copies of Project Gutenberg-tm electronic works in your possession.
If you paid a fee for obtaining a copy of or access to a Project
Gutenberg-tm electronic work and you do not agree to be bound by the
terms of this agreement, you may obtain a refund from the person or
entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B.  "Project Gutenberg" is a registered trademark.  It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement.  There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement.  See
paragraph 1.C below.  There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this agreement
and help preserve free future access to Project Gutenberg-tm electronic
works.  See paragraph 1.E below.

1.C.  The Project Gutenberg Literary Archive Foundation ("the Foundation"
or PGLAF), owns a compilation copyright in the collection of Project
Gutenberg-tm electronic works.  Nearly all the individual works in the
collection are in the public domain in the United States.  If an
individual work is in the public domain in the United States and you are
located in the United States, we do not claim a right to prevent you from
copying, distributing, performing, displaying or creating derivative
works based on the work as long as all references to Project Gutenberg
are removed.  Of course, we hope that you will support the Project
Gutenberg-tm mission of promoting free access to electronic works by
freely sharing Project Gutenberg-tm works in compliance with the terms of
this agreement for keeping the Project Gutenberg-tm name associated with
the work.  You can easily comply with the terms of this agreement by
keeping this work in the same format with its attached full Project
Gutenberg-tm License when you share it without charge with others.

1.D.  The copyright laws of the place where you are located also govern
what you can do with this work.  Copyright laws in most countries are in
a constant state of change.  If you are outside the United States, check
the laws of your country in addition to the terms of this agreement
before downloading, copying, displaying, performing, distributing or
creating derivative works based on this work or any other Project
Gutenberg-tm work.  The Foundation makes no representations concerning
the copyright status of any work in any country outside the United
States.

1.E.  Unless you have removed all references to Project Gutenberg:

1.E.1.  The following sentence, with active links to, or other immediate
access to, the full Project Gutenberg-tm License must appear prominently
whenever any copy of a Project Gutenberg-tm work (any work on which the
phrase "Project Gutenberg" appears, or with which the phrase "Project
Gutenberg" is associated) is accessed, displayed, performed, viewed,
copied or distributed:

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org

1.E.2.  If an individual Project Gutenberg-tm electronic work is derived
from the public domain (does not contain a notice indicating that it is
posted with permission of the copyright holder), the work can be copied
and distributed to anyone in the United States without paying any fees
or charges.  If you are redistributing or providing access to a work
with the phrase "Project Gutenberg" associated with or appearing on the
work, you must comply either with the requirements of paragraphs 1.E.1
through 1.E.7 or obtain permission for the use of the work and the
Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or
1.E.9.

1.E.3.  If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any additional
terms imposed by the copyright holder.  Additional terms will be linked
to the Project Gutenberg-tm License for all works posted with the
permission of the copyright holder found at the beginning of this work.

1.E.4.  Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.

1.E.5.  Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.

1.E.6.  You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including any
word processing or hypertext form.  However, if you provide access to or
distribute copies of a Project Gutenberg-tm work in a format other than
"Plain Vanilla ASCII" or other format used in the official version
posted on the official Project Gutenberg-tm web site (www.gutenberg.org),
you must, at no additional cost, fee or expense to the user, provide a
copy, a means of exporting a copy, or a means of obtaining a copy upon
request, of the work in its original "Plain Vanilla ASCII" or other
form.  Any alternate format must include the full Project Gutenberg-tm
License as specified in paragraph 1.E.1.

1.E.7.  Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8.  You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works provided
that

- You pay a royalty fee of 20% of the gross profits you derive from
     the use of Project Gutenberg-tm works calculated using the method
     you already use to calculate your applicable taxes.  The fee is
     owed to the owner of the Project Gutenberg-tm trademark, but he
     has agreed to donate royalties under this paragraph to the
     Project Gutenberg Literary Archive Foundation.  Royalty payments
     must be paid within 60 days following each date on which you
     prepare (or are legally required to prepare) your periodic tax
     returns.  Royalty payments should be clearly marked as such and
     sent to the Project Gutenberg Literary Archive Foundation at the
     address specified in Section 4, "Information about donations to
     the Project Gutenberg Literary Archive Foundation."

- You provide a full refund of any money paid by a user who notifies
     you in writing (or by e-mail) within 30 days of receipt that s/he
     does not agree to the terms of the full Project Gutenberg-tm
     License.  You must require such a user to return or
     destroy all copies of the works possessed in a physical medium
     and discontinue all use of and all access to other copies of
     Project Gutenberg-tm works.

- You provide, in accordance with paragraph 1.F.3, a full refund of any
     money paid for a work or a replacement copy, if a defect in the
     electronic work is discovered and reported to you within 90 days
     of receipt of the work.

- You comply with all other terms of this agreement for free
     distribution of Project Gutenberg-tm works.

1.E.9.  If you wish to charge a fee or distribute a Project Gutenberg-tm
electronic work or group of works on different terms than are set
forth in this agreement, you must obtain permission in writing from
both the Project Gutenberg Literary Archive Foundation and Michael
Hart, the owner of the Project Gutenberg-tm trademark.  Contact the
Foundation as set forth in Section 3 below.

1.F.

1.F.1.  Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
public domain works in creating the Project Gutenberg-tm
collection.  Despite these efforts, Project Gutenberg-tm electronic
works, and the medium on which they may be stored, may contain
"Defects," such as, but not limited to, incomplete, inaccurate or
corrupt data, transcription errors, a copyright or other intellectual
property infringement, a defective or damaged disk or other medium, a
computer virus, or computer codes that damage or cannot be read by
your equipment.

1.F.2.  LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees.  YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3.  YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3.  LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from.  If you
received the work on a physical medium, you must return the medium with
your written explanation.  The person or entity that provided you with
the defective work may elect to provide a replacement copy in lieu of a
refund.  If you received the work electronically, the person or entity
providing it to you may choose to give you a second opportunity to
receive the work electronically in lieu of a refund.  If the second copy
is also defective, you may demand a refund in writing without further
opportunities to fix the problem.

1.F.4.  Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE.

1.F.5.  Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of damages.
If any disclaimer or limitation set forth in this agreement violates the
law of the state applicable to this agreement, the agreement shall be
interpreted to make the maximum disclaimer or limitation permitted by
the applicable state law.  The invalidity or unenforceability of any
provision of this agreement shall not void the remaining provisions.

1.F.6.  INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in accordance
with this agreement, and any volunteers associated with the production,
promotion and distribution of Project Gutenberg-tm electronic works,
harmless from all liability, costs and expenses, including legal fees,
that arise directly or indirectly from any of the following which you do
or cause to occur: (a) distribution of this or any Project Gutenberg-tm
work, (b) alteration, modification, or additions or deletions to any
Project Gutenberg-tm work, and (c) any Defect you cause.


Section  2.  Information about the Mission of Project Gutenberg-tm

Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of computers
including obsolete, old, middle-aged and new computers.  It exists
because of the efforts of hundreds of volunteers and donations from
people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come.  In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future generations.
To learn more about the Project Gutenberg Literary Archive Foundation
and how your efforts and donations can help, see Sections 3 and 4
and the Foundation web page at https://www.pglaf.org.


Section 3.  Information about the Project Gutenberg Literary Archive
Foundation

The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service.  The Foundation's EIN or federal tax identification
number is 64-6221541.  Its 501(c)(3) letter is posted at
https://pglaf.org/fundraising.  Contributions to the Project Gutenberg
Literary Archive Foundation are tax deductible to the full extent
permitted by U.S. federal laws and your state's laws.

The Foundation's principal office is located at 4557 Melan Dr. S.
Fairbanks, AK, 99712., but its volunteers and employees are scattered
throughout numerous locations.  Its business office is located at
809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email
business@pglaf.org.  Email contact links and up to date contact
information can be found at the Foundation's web site and official
page at https://pglaf.org

For additional contact information:
     Dr. Gregory B. Newby
     Chief Executive and Director
     gbnewby@pglaf.org


Section 4.  Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment.  Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States.  Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements.  We do not solicit donations in locations
where we have not received written confirmation of compliance.  To
SEND DONATIONS or determine the status of compliance for any
particular state visit https://pglaf.org

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States.  U.S. laws alone swamp our small staff.

Please check the Project Gutenberg Web pages for current donation
methods and addresses.  Donations are accepted in a number of other
ways including including checks, online payments and credit card
donations.  To donate, please visit: https://pglaf.org/donate


Section 5.  General Information About Project Gutenberg-tm electronic
works.

Professor Michael S. Hart was the originator of the Project Gutenberg-tm
concept of a library of electronic works that could be freely shared
with anyone.  For thirty years, he produced and distributed Project
Gutenberg-tm eBooks with only a loose network of volunteer support.


Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as Public Domain in the U.S.
unless a copyright notice is included.  Thus, we do not necessarily
keep eBooks in compliance with any particular paper edition.


Most people start at our Web site which has the main PG search facility:

     https://www.gutenberg.org

This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.